| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
dso__read_symbol() asserts that len <= jited_prog_len, where len comes
from sym->end - sym->start (parsed from PERF_RECORD_KSYMBOL in
perf.data). Both values originate from untrusted file input.
With NDEBUG (production builds), the assert is compiled out, allowing
an out-of-bounds heap read when the BPF program buffer is accessed.
Without NDEBUG, a crafted perf.data crashes perf with an assertion
failure.
Replace the assert with a runtime bounds check that returns NULL with
an appropriate error code, matching the existing error handling
pattern in this function.
Fixes: aa04707f507e ("perf dso: Support BPF programs in dso__read_symbol()")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Song Liu <song@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
dso_cache__memcpy() computes cache_offset = offset - cache->offset,
then cache_size = min(cache->size - cache_offset, size). The RB tree
lookup in __dso_cache__find() matches using the full
DSO__DATA_CACHE_SIZE window, but cache->size reflects the actual pread
return value from dso_cache__populate().
A short pread (e.g. near end-of-file) makes cache->size smaller than
DSO__DATA_CACHE_SIZE. If a subsequent access targets an offset past
cache->offset + cache->size but within the DSO__DATA_CACHE_SIZE
window, the cache entry is found but cache_offset exceeds cache->size.
Since both are u64, the subtraction cache->size - cache_offset wraps
to a large value, min() selects the caller's size, and memcpy reads
out of bounds.
Return 0 for an offset past the valid cached data. For a regular
file a short pread only happens at end-of-file, so 0 is what a direct
pread() at that offset would return: cached_io() stops its read loop
as on EOF. Re-reading from the backing file would not help — a
second pread at the same offset returns the same short count.
Fixes: 366df72657e0 ("perf dso: Refactor dso_cache__read()")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
file_size()
file_read() and file_size() use ret = -errno when
dso__data(dso)->fd is negative after try_to_open_dso() fails. By this
point errno has been through mutex_lock(), nsinfo__mountns_enter(), and
multiple open() attempts inside try_to_open_dso() — it no longer
reflects the actual open failure. If errno happens to be 0, ret = 0
looks like EOF rather than an error, and file_size() callers like
dso__data_size() would then report a zero-sized file instead of
failing.
dso__data(dso)->fd is always negative on failure — -errno from
__open_dso() when no filename could be built (e.g. -EINVAL, -ENOENT),
or -1 when do_open() itself failed — and never 0, so use it directly
instead of reading the stale global errno.
No assert() or comment is needed after the assignment: the enclosing
if (dso__data(dso)->fd < 0) already guarantees ret < 0
[Namhyung Kim review].
Fixes: 33bdedcea2d7 ("perf tools: Protect dso cache fd with a mutex")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
dso__decompress_kmodule_path() unconditionally calls close(fd) on the
return value of decompress_kmodule(). When decompression fails or the
DSO is not compressed, decompress_kmodule() returns -1. close(-1)
fails with EBADF and clobbers errno, which callers up the chain
(dso__get_filename → __open_dso) depend on for error propagation.
Guard the close() call with fd >= 0 so only valid file descriptors are
closed.
Fixes: 42b3fa670825 ("perf tools: Introduce dso__decompress_kmodule_{fd,path}")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
__open_dso() computes fd = -errno when dso__get_filename() returns NULL.
Some failure paths in dso__get_filename() (e.g. binary type mismatch)
return NULL without making a syscall, leaving errno at 0 from a prior
successful call. fd = -0 = 0, which is stdin — subsequent code treats
it as a valid file descriptor.
Fall back to ENOENT when errno is 0, ensuring fd is always negative on
failure.
The forced ENOENT stays in errno for the callers that check it after a
negative fd. It must not misdirect the try_to_open_dso() fallback
loop, though: dso__get_filename()'s chroot fallback used to accept a
stale ENOENT even when stat() succeeded on a non-regular file (e.g. a
directory). Re-stat() there and only take the chroot path when
stat() actually failed with ENOENT [sashiko-bot review of PATCH 1/5].
Fixes: eba5102d2f0b ("perf tools: Add global list of opened dso objects")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
dso__get_filename() sets errno to a negative custom DSO_LOAD_ERRNO
value when kernel module decompression fails:
errno = *dso__load_errno(dso); /* e.g. -9996 */
The caller __open_dso() then computes fd = -errno, producing a large
positive value (9996) that looks like a valid file descriptor. This
can cause close_data_fd() to close an unrelated fd used by another
subsystem.
Set errno to EIO instead. The detailed error code is already stored
in dso__load_errno(dso) for diagnostic messages.
Fixes: 1d6b3c9ba756a513 ("perf tools: Decompress kernel module when reading DSO data")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Several functions cast bpf_prog_info fields (jited_ksyms,
jited_func_lens, jited_prog_insns) from u64 to pointers and
dereference them. These fields are only valid pointers if
bpil_offs_to_addr() converted their file offsets to addresses, which
only happens when the corresponding PERF_BPIL_* bits are set in
info_linear->arrays.
A crafted perf.data can leave these bits unset while setting non-zero
counts and offset values, causing the functions to dereference raw file
offsets as pointers.
Add array bitmask validation to all perf.data processing paths:
- __bpf_event__print_bpf_prog_info(): check JITED_KSYMS and
JITED_FUNC_LENS (changed to take struct perf_bpil *)
- machine__process_bpf_event_load(): check JITED_KSYMS
- bpf_read(): check JITED_INSNS before memcpy from jited_prog_insns
- dso__disassemble_filename(): check JITED_INSNS before returning
jited_prog_insns pointer
Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
filename__decompress() has an early return for files that are not
actually compressed, where it calls open() directly. When open()
fails, the function returns -1 but never sets *err. The caller chain
(decompress_kmodule → dso__decompress_kmodule_path → dso__get_filename)
then reads *dso__load_errno(dso) to set errno, but that field was never
populated, so errno gets a stale or zero value.
With errno=0, __open_dso() computes fd = -errno = 0, which is non-
negative, so callers treat fd 0 (stdin) as a valid DSO file descriptor.
Set *err = errno when open() fails on the uncompressed path, matching
the error handling on the compressed path at line 354.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 8b42b7e5e8b5692b ("perf tools: Add is_compressed callback to compressions array")
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
dso__get_filename() allocates name with malloc(PATH_MAX), but the
dso__filename_with_chroot() path replaces name with an asprintf'd
exact-size string (e.g. 8 bytes for "/a/b.ko"). When the DSO needs
decompression, dso__decompress_kmodule_path() writes the temp path
("/tmp/perf-kmod-XXXXXX", 22 bytes) into newpath, and strcpy(name,
newpath) overflows the smaller allocation.
Replace the strcpy with strdup(newpath) + free(name) so the buffer
is always correctly sized for its content.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 1d6b3c9ba756a513 ("perf tools: Decompress kernel module when reading DSO data")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
dso__read_running_kernel_build_id() uses sprintf() to format a sysfs
path from machine->root_dir into a PATH_MAX buffer. If root_dir is
close to PATH_MAX in length, appending "/sys/kernel/notes" (18 bytes)
overflows the stack buffer.
Switch to snprintf() with sizeof(path) to prevent the overflow.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: cdd059d731eeb466 ("perf tools: Move dso_* related functions into dso object")
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
filename__decompress()
filename__decompress() has an early return path for files that are not
actually compressed. This path returns the fd from open() directly but
never writes to the pathname output parameter, leaving the caller with
an uninitialized buffer despite a successful return.
Callers like dso__decompress_kmodule_path() pass pathname to
decompress_kmodule() which uses it to set the decompressed file path.
If pathname is uninitialized, subsequent operations on the path produce
undefined behavior.
Fix by setting pathname to an empty string on the uncompressed path.
Callers already check for an empty pathname to distinguish temporary
decompressed files (which need unlink) from the original file.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 7ac22b088afe26a4 ("perf tools: Add filename__decompress function")
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
mkstemp() creates file descriptors without the close-on-exec flag.
These fds leak to child processes spawned during symbol resolution
(addr2line, objdump), wasting descriptors and potentially exposing
temporary file contents.
Replace mkstemp() with mkostemp(tmpbuf, O_CLOEXEC) at all three
call sites:
- filename__decompress() in dso.c
- read_gnu_debugdata() in symbol-elf.c
- kcore__init() in symbol-elf.c
Fixes: 42b3fa670825983f ("perf tools: Introduce dso__decompress_kmodule_{fd,path}")
Fixes: b10f74308e130527 ("perf symbol: Support .gnu_debugdata for symbols")
Fixes: afba19d9dc8eba66 ("perf symbols: Workaround objdump difficulties with kcore")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
open() calls in dso.c and symbol-elf.c omit O_CLOEXEC, which leaks
file descriptors to child processes spawned during symbol resolution
(e.g., addr2line, objdump). This can exhaust the fd limit during
long profiling sessions or when processing many DSOs.
Add O_CLOEXEC to all open() calls in both files (12 call sites).
Fixes: cdd059d731eeb466 ("perf tools: Move dso_* related functions into dso object")
Fixes: e5a1845fc0aeca85 ("perf symbols: Split out util/symbol-elf.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add perf_arch_is_big_endian(), dso__read_e_machine_endian(),
dso__e_machine_endian(), and thread__e_machine_endian() to support
bi-endianness and cross-architecture analysis without breaking the
existing API.
These helpers allow querying the absolute endianness of a DSO or
thread, which is required for tools like Capstone that need to set the
correct disassembly mode.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The e_flags are needed to accurately compute complete perf register
information for CSKY.
Add the ability to read and have this value associated with a thread.
This change doesn't wire up the use of the e_flags except in disasm
where use already exists but just wasn't set up yet.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out the resilient e_machine reading code in dso so that it may
be used in thread.
As there is no dso in that case, make the dso optional.
This makes some minor other changes as the swap type from the dso cannot
be ascertained.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dso__debuginfo() just used the path name to open the file but it may
be outdated. It should check build-ID and use the file in the build-ID
cache if available rather than just using the path name.
Let's factor out dso__get_filename() to avoid code duplicate.
Fixes: 53a61a6ca279165d ("perf annotate: Add dso__debuginfo() helper")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rather than have 2 Dwfl unify the Dwfl in skip-callchain-idx with that
is used by libdw__addr2line().
Rename that variable in 'struct dso' from 'a2l_libdw' to just 'libdw' as
it is now used in more than addr2line.
The Dwfl in skip-callchain-idx uses a map address when being read with
dwfl_report_elf (rather than dwfl_report_offline that addr2line
uses).
skip-callchain-idx is wrong as the map address can vary between
processes because of ASLR, ie it should need a different Dwfl per
process.
In the code after this patch the base address becomes 0 and the mapped
PC is used with the dwfl functions.
This should increase the accuracy of skip-callchain-idx, but the impact
has only been build tested.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Better ensure a read e_machine is valid by checking the file appears
like an ELF file and the read e_machine value is less than EM_NUM.
This better avoids spurious e_machine values when looking for an
e_machine in say a thread.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
strerror() has thread safety issues, strerror_r() requires stack
allocated buffers.
Code in perf has already been using the "%m" formatting flag that is a
widely support glibc extension to print the current errno's description.
Expand the usage of this formatting flag and remove usage of
strerror()/strerror_r().
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yunseong Kim <ysk@kzalloc.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add an implementation of addr2line that uses libdw.
Other addr2line implementations are slow, particularly in the case of
forking addr2line.
Add an implementation that caches the libdw information in the dso and
uses it to find the file and line number information.
Inline information is supported but because cu_walk_functions_at visits
the leaf function last add a inline_list__append_tail to reverse the
lists order.
Committer testing:
# perf probe -x ~/bin/perf libdw__addr2line
Added new event:
probe_perf:libdw_addr2line (on libdw__addr2line in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:libdw_addr2line -aR sleep 1
#
# perf stat -e probe_perf:libdw_addr2line perf report -f --dso perf --stdio -s srcfile,srcline
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cpu/cycles/Pu'
# Event count (approx.): 5535180842
#
# Overhead Source File Source:Line
# ........ ............ ...............
#
99.04% inlineloop.c inlineloop.c:21
0.46% inlineloop.c inlineloop.c:20
#
# (Tip: For tracepoint events, try: perf report -s trace_fields)
#
Performance counter stats for 'perf report -f --dso perf --stdio -s srcfile,srcline':
44 probe_perf:libdw_addr2line
0.037260744 seconds time elapsed
0.025299000 seconds user
0.011918000 seconds sys
#
Adding probes to the other addr2line implementations (llvm__addr2line,
libbfd__addr2line and cmd__addr2line) I noticed some fallbacks to the
llvm one:
Performance counter stats for 'perf report -f --dso perf --stdio -s srcfile,srcline':
44 probe_perf:libdw_addr2line
23 probe_perf:llvm_addr2line
0 probe_perf:libbfd_addr2line
0 probe_perf:cmd_addr2line
Something to investigate further, but at least we don't fallback to the
cmd based one :-)
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ensure errno is set and return to caller for error handling.
Unusually for perf the value isn't negated as expected by
symbol__strerror_disassemble().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set the buffer to the code in the BPF linear info. This enables BPF
JIT code disassembly by LLVM and capstone.
Move the common but minimal disassmble_bpf_image call to
disassemble_objdump so that it is only called after falling back to the
objdump option.
Similarly move the disassmble_bpf function to disassemble_objdump and
rename to disassmble_bpf_libbfd to make it clearer that this support
relies on libbfd.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the read_symbol function to dso.h, make the return type const and
add a mutable out_buf out parameter.
In future changes this will allow a code pointer to be returned without
necessary allocating memory.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dso_id previously contained the major, minor, inode and inode
generation information from a mmap2 event - the inode generation would
be zero when reading from /proc/pid/maps. The build_id was in the
dso. With build ID mmap2 events these fields wouldn't be initialized
which would largely mean the special empty case where any dso would
match for equality. This isn't desirable as if a dso is replaced we
want the comparison to yield a difference.
To support detecting the difference between DSOs based on build_id,
move the build_id out of the DSO and into the dso_id. The dso_id is
also stored in the DSO so nothing is lost. Capture in the dso_id what
parts have been initialized and rename dso_id__inject to
dso_id__improve_id so that it is clear the dso_id is being improved
upon with additional information. With the build_id in the dso_id, use
memcmp to compare for equality.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pass in a size argument rather than implying all build id strings must
be SBUILD_ID_SIZE.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-4-irogers@google.com
[ fixed some build errors ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
With the dso_data embedded in a dso there is a reference counted
pointer to the dso rather than using container_of with reference count
checking. This data can hold the dso live meaning that no dso__put
ever deletes it. Add a check for this case and close the dso_data when
it happens. There isn't an infinite loop as the dso_data clears the
file descriptor prior to putting on the dso.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624190326.2038704-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The pattern:
```
if (x) {
lock(...)
}
block1;
if (x) {
unlock(...)
}
```
defeats clang's -Wthread-safety analysis where it complains of locks
held on one path and not another.
Add helper functions for "block1" then restructure as:
```
if (x) {
lock(...);
block1();
unlock(...);
} else {
block1();
}
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Fei Lang <langfei@huawei.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250519224645.1810891-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For ELF file dsos read the e_machine from the ELF header. For kernel
types assume the e_machine matches the perf tool. In other cases
return EM_NONE.
When reading from the ELF header use DSO__SWAP that may need
dso->needs_swap initializing. Factor out dso__swap_init to allow this.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
dso__list_del with address sanitizer and/or reference count checking
will call dso__put that can call dso__data_close reentrantly trying to
lock the dso__data_open_lock and deadlocking. Switch from pthread
mutexes to perf's mutex so that lock checking is performed in debug
builds. Add lock annotations that diagnosed the problem. Release the
dso__data_open_lock around the dso__put to avoid the deadlock.
Change the declaration of dso__data_get_fd to return a boolean,
indicating the fd is valid and the lock is held, to make it compatible
with the thread safety annotations as a try lock.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250318043151.137973-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Fedora introduced a "MiniDebuginfo" feature, in which an LZMA-compressed
ELF file is placed inside a section named ".gnu_debugdata". This file
contains nothing but a symbol table, which can be used to supplement the
.dynsym section which only contains required symbols for runtime.
It is supported by GDB for stack traces, but it should be useful for
tracing as well. Implement support for loading symbols from
.gnu_debugdata.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250307232206.2102440-4-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The passed dso_id is copied and so is never an out argument. Remove
its mutability.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that symsrc_filename is always accessed through an accessor, we also
need a free() function for it to avoid the following compilation error:
util/unwind-libunwind-local.c:416:12: error: lvalue required as unary
‘&’ operand
416 | zfree(&dso__symsrc_filename(dso));
Fixes: 1553419c3c10 ("perf dso: Fix address sanitizer build")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240715094715.3914813-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile
Error: Failed to add events.
--- Cleaning up ---
"foo" does not hit any event.
Error: Failed to delete events.
---- end(-1) ----
116: test perf probe of function from different CU : FAILED!
The test does below to probe function "foo" :
# gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
# gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
Error: Failed to add events.
Perf probe fails to find symbol foo in the executable placed in
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7
Simple reproduce:
# mktemp -d /tmp/perf-checkXXXXXXXXXX
/tmp/perf-checkcWpuLRQI8j
# gcc -g -o test test.c
# cp test /tmp/perf-checkcWpuLRQI8j/
# nm /tmp/perf-checkcWpuLRQI8j/test | grep foo
00000000100006bc T foo
# ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo
Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test
Error: Failed to add events.
But it works with any files like /tmp/perf/test. Only for
patterns with "/tmp/perf-", this fails.
Further debugging, commit 80d496be89ed ("perf report: Add support
for profiling JIT generated code") added support for profiling JIT
generated code. This patch handles dso's of form
"/tmp/perf-$PID.map" .
The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)"
to match "/tmp/perf-$PID.map". With this commit, any dso in
/tmp/perf- folder will be considered separately for processing
(not only JIT created map files ). Fix this by changing the
string pattern to check for "/tmp/perf-%d.map". Add a helper
function is_perf_pid_map_name to do this check. In "struct dso",
dso->long_name holds the long name of the dso file. Since the
/tmp/perf-$PID.map check uses the complete name, use dso___long_name for
the string name.
With the fix,
# ./perf test "test perf probe of function from different CU"
117: test perf probe of function from different CU : Ok
Fixes: 56cbeacf1435 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-1-atrajeev@linux.vnet.ibm.com
|
|
The dso pointer in 'struct dso_data' is necessary for reference count
checking to account for the dso_data forming a global list of open dso's
with references to the dso.
The dso pointer also allows for the indirection that reference count
checking needs. Outside of reference count checking the indirection
isn't needed and container_of() is more efficient and saves space.
The reference count won't be increased by placing items onto the global
list, matching how things were before the reference count checking
change, but we assert the dso is in dsos holding it live (and that the
set of open dsos is a subset of all dsos for the machine).
Update the DSO data tests so that they use a dsos struct to make the
invariant true.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.
The majority of the change is mechanical in nature and not easy to
split up.
Committer testing:
'perf test' up to this patch shows no regressions.
But:
util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....
This was updated:
- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);
But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).
Add the missing argument:
symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
DSOs were held on a list for fast iteration and in an rbtree for fast
finds.
Switch to using a lazily sorted array where iteration is just iterating
through the array and binary searches are the same complexity as
searching the rbtree.
The find may need to sort the array first which does increase the
complexity, but add operations have lower complexity and overall the
complexity should remain about the same.
The set name operations on the dso just records that the array is no
longer sorted, avoiding complexity in rebalancing the rbtree.
Tighter locking discipline is enforced to avoid the array being resorted
while long and short names or ids are changed.
The array is smaller in size, replacing 6 pointers with 2, and so even
with extra allocated space in the array, the array may be 50%
unoccupied, the memory saving should be at least 2x.
Committer testing:
On a previous version of this patchset we were getting a lot of warnings
about deleting a DSO still on a list, now it is ok:
root@x1:~# perf probe -l
root@x1:~# perf probe finish_task_switch
Added new event:
probe:finish_task_switch (on finish_task_switch)
You can now use it in all perf tools, such as:
perf record -e probe:finish_task_switch -aR sleep 1
root@x1:~# perf probe -l
probe:finish_task_switch (on finish_task_switch@kernel/sched/core.c)
root@x1:~# perf trace -e probe:finish_task_switch/max-stack=8/ --max-events=1
0.000 migration/0/19 probe:finish_task_switch(__probe_ip: -1894408688)
finish_task_switch.isra.0 ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
smpboot_thread_fn ([kernel.kallsyms])
kthread ([kernel.kallsyms])
ret_from_fork ([kernel.kallsyms])
ret_from_fork_asm ([kernel.kallsyms])
root@x1:~#
root@x1:~# perf probe -d probe:*
Removed event: probe:finish_task_switch
root@x1:~# perf probe -l
root@x1:~#
I also ran the full 'perf test' suite after applying this one, no
regressions.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move dso and dso_id functions to dso.c to match the struct declarations.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
They are often searched by many different places. Let's add a cache
for them to reduce the duplicate DWARF access.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-23-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To aggregate accesses to the same data type, add 'data_types' tree in
DSO to maintain data types and find it by name and size.
It might have different data types that happen to have the same name,
so it also compares the size of the type.
Even if it doesn't 100% guarantee, it reduces the possibility of
mis-handling of such conflicts.
And I don't think it's common to have different types with the same
name.
Committer notes:
Very few cases on the Linux kernel, but there are some different types
with the same name, unsure if there is a debug mode in libbpf dedup that
warns about such cases, but there are provisions in pahole for that,
see:
"emit: Notice type shadowing, i.e. multiple types with the same name (enum, struct, union, etc)"
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=4f332dbfd02072e4f410db7bdcda8d6e3422974b
$ pahole --compile > vmlinux.h
$ rm -f a ; make a
cc a.c -o a
$ grep __[0-9] vmlinux.h
union irte__1 {
struct map_info__1;
struct map_info__1 {
struct map_info__1 * next; /* 0 8 */
$
drivers/iommu/amd/amd_iommu_types.h 'union irte'
include/linux/dmar.h 'struct irte'
include/linux/device-mapper.h:
union map_info {
void *ptr;
};
include/linux/mtd/map.h:
struct map_info {
const char *name;
unsigned long size;
resource_size_t phys;
<SNIP>
kernel/events/uprobes.c:
struct map_info {
struct map_info *next;
struct mm_struct *mm;
unsigned long vaddr;
};
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update "struct dso" to include new member "is_kmod".
This new field will determine if the file is a kernel
module or not.
To resolve the address from a sample, perf looks at the
DSO maps. In case of address from a kernel module, there
were some address found to be not resolved. This was
observed while running perf test for "Object code reading".
Though the ip falls beteen the start address of the loaded
module (perf map->start ) and end address ( perf map->end),
it was unresolved.
This was happening because in some cases for kernel
modules, address from sample points to stub instructions.
To identify if the DSO is a kernel module, the new field
"is_kmod" is added to "struct dso".
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230928075213.84392-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Most perf commands want to sort symbols by name and this is done via
an invasive rbtree that on 64-bit systems costs 24 bytes. Sorting the
symbols in a DSO by name is optional and not done by default, however,
if sorting is requested the 24 bytes is allocated for every
symbol.
This change removes the rbtree and uses a sorted array of symbol
pointers instead (costing 8 bytes per symbol). As the array is created
on demand then there are further memory savings. The complexity of
sorting the array and using the rbtree are the same.
To support going to the next symbol, the index of the current symbol
needs to be passed around as a pair with the current symbol. This
requires some API changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20230623054520.4118442-3-irogers@google.com
[ minimize change in symbols__sort_by_name() ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Print dso offset only for object files, and in those cases force using the
dso->long_name if the dso->name starts with '[' or the dso is kcore, in
order to avoid special names such as [vdso], or mixing up kcore with
vmlinux.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230424055107.12105-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
dso->nsinfo members
We'll need to reference count dso->nsinfo, so reduce the number of
direct accesses by having a shorter form of obtaining a filename with
a chroot (namespace one).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/lkml/ZD26ZlqSbgSyH5lX@kernel.org
[ Used nsinfo__pid(dso->nsinfo), as it was already present ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Later changes will add reference count checking for struct map, add a
helper function to invoke the map_ip and unmap_ip function pointers. The
helper allows the reference count check to be in fewer places.
Committer notes:
Add missing conversions to:
tools/perf/util/map.c
tools/perf/util/cs-etm.c
tools/perf/util/annotate.c
tools/perf/arch/powerpc/util/sym-handling.c
tools/perf/arch/s390/annotate/instructions.c
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20230404205954.2245628-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There may be threads racing to update dso->nsinfo:
https://lore.kernel.org/linux-perf-users/CAP-5=fWZH20L4kv-BwVtGLwR=Em3AOOT+Q4QGivvQuYn5AsPRg@mail.gmail.com/
Holding the dso->lock avoids use-after-free, memory leaks and other such
bugs. Apply the fix in:
https://lore.kernel.org/linux-perf-users/20211118193714.2293728-1-irogers@google.com/
of there being a missing nsinfo__put now that the accesses are data race
free. Fixes test "Lookup mmap thread" when compiled with address
sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dario Petrillo <dario.pk1@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Fangrui Song <maskray@google.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Weiguo Li <liwg06@foxmail.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Zechuan Chen <chenzechuan1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/20220826164242.43412-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch to the use of mutex wrappers that provide better error checking.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dario Petrillo <dario.pk1@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Fangrui Song <maskray@google.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jason Wang <wangborong@cdjrlc.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Weiguo Li <liwg06@foxmail.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Zechuan Chen <chenzechuan1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/20220826164242.43412-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently it doesn't handle tasks in chroot properly. As filenames in
MMAP records base on their root directory, it's different than what perf
tool can see from outside.
Add filename_with_chroot() helper to deal with those cases. The
function returns a new filename only if it's in a different root
directory. Since it needs to access /proc for the process, it only
works until the task exits.
With this change, I can see symbols in my program like below.
# perf record -o- chroot myroot myprog 3 | perf report -i-
...
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .............................
#
99.83% myprog myprog [.] loop
0.04% chroot [kernel.kallsyms] [k] fxregs_fixup
0.04% chroot [kernel.kallsyms] [k] rsm_load_seg_32
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To prepare for impending deprecation of libbpf's bpf_program__get_prog_info_linear(),
pull in the function and associated helpers into the perf codebase and migrate
existing uses to the perf copy.
Since libbpf's deprecated definitions will still be visible to perf, it is necessary
to rename perf's definitions.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211011082031.4148337-4-davemarchevsky@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
$ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID: 53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
