summaryrefslogtreecommitdiff
path: root/net/atm/common.c
AgeCommit message (Collapse)AuthorFilesLines
2026-08-06net/atm: fix slab-out-of-bounds read in vcc_setsockopt()Eric Dumazet1-5/+9
vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+53ecc09fb81df10ef4de@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=53ecc09fb81df10ef4de Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260805131508.3227331-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
Merge in late fixes in preparation for the net-next PR. Conflicts: net/tls/tls_sw.c 406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms") 79511603a65b ("tls: remove dead sockmap (psock) handling from the SW path") drivers/net/ethernet/microsoft/mana/mana_en.c f8fd56977eeea ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check") d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size") https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16atm: remove the unused pre_send and send_bh device operationsJakub Kicinski1-6/+0
atmdev_ops::pre_send (a TX pre-processing hook) and ::send_bh (a bottom-half capable send variant) have no implementation behind them: no remaining ATM driver sets either, so vcc_sendmsg() always skipped pre_send and the raw AAL0/AAL5 paths always fell back to ->send(). The drivers that used these hooks were removed with the legacy ATM adapters. Drop both operations and the dead branches that tested for them. Link: https://patch.msgid.link/20260615194416.752559-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16atm: remove the unused change_qos device operationJakub Kicinski1-23/+2
atmdev_ops::change_qos() was the hook for renegotiating the traffic parameters of an already-connected VCC, driven from SO_ATMQOS on a connected socket (and previously from the SVC as_modify path, now gone). None of the ATM drivers left in tree implement it - solos-pci only listed change_qos = NULL - so atm_change_qos() always returned -EOPNOTSUPP. Drop the operation and return -EOPNOTSUPP directly. Link: https://patch.msgid.link/20260615194416.752559-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16atm: remove SVC socket support and the signaling daemon interfaceJakub Kicinski1-29/+6
ATM switched virtual circuits (SVCs) are set up and torn down by a user-space signaling daemon (atmsigd) which the kernel talks to over a dedicated "sigd" socket: the kernel marshals Q.2931-style requests (as_connect, as_listen, as_accept, as_close, ...) to the daemon and applies the results to PF_ATMSVC sockets. This is the machinery behind classical SVC use and was the foundation for LANE / MPOA, all of which have been removed. DSL deployments do not use any of this. PPPoATM and BR2684 run over permanent virtual circuits (PF_ATMPVC) with a statically configured VPI/VCI; no atmsigd, no Q.2931. Neither remaining ATM driver (solos-pci, the USB DSL modems) is reachable through the SVC path. Remove the SVC socket family and the signaling interface: - delete net/atm/svc.c, net/atm/signaling.c and signaling.h - drop atmsvc_init()/atmsvc_exit() and the PF_ATMSVC registration and module alias - drop the ATMSIGD_CTRL ioctl (sigd_attach) and the /proc/net/atm/svc file - fold the SVC branch out of atm_change_qos(); all sockets are PVCs now The obsolete ATM_SETSC ioctl stub is left in place (it already just warns and returns 0), as is the struct atm_vcc SVC bookkeeping shared with the queueing layer. Link: https://patch.msgid.link/20260615194416.752559-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16atm: remove the local ATM (NSAP) address registryJakub Kicinski1-1/+0
net/atm/addr.c maintained the per-device lists of local NSAP addresses (dev->local) and ILMI-learned LECS addresses (dev->lecs). These exist solely to serve SVC signaling: the lists are populated through the ATM_{ADD,DEL,RST}ADDR / ATM_{ADD,DEL,GET}LECSADDR ioctls used by the atmsigd / ILMI daemons, and consumed when registering addresses with the signaling daemon. The LECS list belonged to LAN Emulation, which has been removed. With no SVC users in a DSL-only configuration these lists are always empty, so drop the registry entirely: - remove the ADDR/LECSADDR/RSTADDR ioctls - drop the now-always-empty "atmaddress" sysfs attribute - remove the dev->local / dev->lecs lists, structs and enums - delete net/atm/addr.c and net/atm/addr.h The device ESI ("MAC" address) and its ATM_{G,S}ETESI ioctls and "address" sysfs attribute are retained - the USB DSL modems populate the ESI. Link: https://patch.msgid.link/20260615194416.752559-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16atm: remove the unused send_oam / push_oam callbacksJakub Kicinski1-1/+0
The atmdev_ops::send_oam device operation and the atm_vcc::push_oam callback were the kernel's interface for raw F4/F5 OAM cell exchange. Nothing assigns them a non-NULL value and nothing ever invokes them: the core only ever initialises push_oam to NULL (in vcc_create() and the AAL init helpers) and the Solos driver only lists send_oam = NULL for documentation. The drivers that actually drove OAM through these hooks were removed along with the legacy ATM adapters. Drop both callbacks and the NULL initialisers. Link: https://patch.msgid.link/20260615194416.752559-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-16atm: remove AAL3/4 transport supportJakub Kicinski1-7/+0
AAL3/4 is an obsolete connection-oriented ATM adaptation layer that has seen no real use since the SMDS-era hardware it was designed for (90s?). We are only maintaining ATM support in-tree to keep PPPoATM running, and PPPoATM runs over AAL5. Drop the "raw" AAL3/4 transport (atm_init_aal34()) and the ATM_AAL34 cases in the connect and traffic-parameter paths. A vcc_connect() with qos.aal == ATM_AAL34 now fails with -EPROTOTYPE. uAPI cleanup is performed later, separately. Link: https://patch.msgid.link/20260615194416.752559-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-12net: atm: reject out-of-range traffic classes in QoS validationZhengchuan Liang1-0/+2
Reject ATM traffic classes above ATM_ANYCLASS in check_tp(). SO_ATMQOS stores the supplied QoS after check_qos() succeeds, so accepting larger values leaves invalid traffic_class values in vcc->qos. That bad state later reaches pvc_info(), which indexes class_name[] with vcc->qos.{rx,tp}.traffic_class. Values above ATM_ANYCLASS cause an out-of-bounds read when /proc/net/atm/pvc is read. Tighten the existing QoS validation so invalid traffic_class values are rejected at the point where user supplied QoS is accepted. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/58f02c6f73d9818fd5d2022e1116759fdde6116b.1780965530.git.zcliangcn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22atm: convert to getsockopt_iterBreno Leitao1-7/+11
Convert the ATM SVC and PVC sockets, along with the shared vcc_getsockopt() helper, to use the new getsockopt_iter callback with sockopt_t. Key changes: - Replace (char __user *optval, int __user *optlen) with sockopt_t *opt - Use opt->optlen for buffer length (input) - Use copy_to_iter() instead of put_user()/copy_to_user() Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260520-getsock_four-v3-2-b8c0b16b7780@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Conflicts: net/xdp/xsk.c 0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number") 8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb") 30ed05adca4a ("xsk: use a smaller new lock for shared pool case") https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-20net: atm: fix incorrect cleanup function call in error pathSayooj K Karun1-1/+1
In atm_init(), if atmsvc_init() fails, the code jumps to out_atmpvc_exit label which incorrectly calls atmsvc_exit() instead of atmpvc_exit(). This results in calling the wrong cleanup function and failing to properly clean up atmpvc_init(). Fix this by calling atmpvc_exit() in the out_atmpvc_exit error path. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sayooj K Karun <sayooj@aerlync.com> Link: https://patch.msgid.link/20251119085747.67139-1-sayooj@aerlync.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-15net: add SK_WMEM_ALLOC_BIAS constantEric Dumazet1-1/+1
sk->sk_wmem_alloc is initialized to 1, and sk_wmem_alloc_get() takes care of this initial value. Add SK_WMEM_ALLOC_BIAS define to not spread this magic value. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20251013152234.842065-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-22atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().Kuniyuki Iwashima1-3/+12
syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68a6767c.050a0220.3d78fd.0011.GAE@google.com/ Tested-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250821021901.2814721-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17atm: Revert atm_account_tx() if copy_from_iter_full() fails.Kuniyuki Iwashima1-0/+1
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by atm_account_tx(). It is expected to be reverted by atm_pop_raw() later called by vcc->dev->ops->send(vcc, skb). However, vcc_sendmsg() misses the same revert when copy_from_iter_full() fails, and then we will leak a socket. Let's factorise the revert part as atm_return_tx() and call it in the failure path. Note that the corresponding sk_wmem_alloc operation can be found in alloc_tx() as of the blamed commit. $ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: add sk_wake_async_rcu() helperEric Dumazet1-1/+1
While looking at UDP receive performance, I saw sk_wake_async() was no longer inlined. This matters at least on AMD Zen1-4 platforms (see SRSO) This might be because rcu_read_lock() and rcu_read_unlock() are no longer nops in recent kernels ? Add sk_wake_async_rcu() variant, which must be called from contexts already holding rcu lock. As SOCK_FASYNC is deprecated in modern days, use unlikely() to give a hint to the compiler. sk_wake_async_rcu() is properly inlined from __udp_enqueue_schedule_skb() and sock_def_readable(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240328144032.1864988-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: fill in MODULE_DESCRIPTION()s for ATMJakub Kicinski1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the ATM modules and drivers. Link: https://lore.kernel.org/r/20240104143737.1317945-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28net: SO_RCVMARK socket option for SO_MARK with recvmsg()Erin MacNeil1-1/+1
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK should be included in the ancillary data returned by recvmsg(). Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs(). Signed-off-by: Erin MacNeil <lnx.erin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06net: remove noblock parameter from skb_recv_datagram()Oliver Hartkopp1-1/+1
skb_recv_datagram() has two parameters 'flags' and 'noblock' that are merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)' As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags' into 'flags' and 'noblock' with finally obsolete bit operations like this: skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc); And this is not even done consistently with the 'flags' parameter. This patch removes the obsolete and costly splitting into two parameters and only performs bit operations when really needed on the caller side. One missing conversion thankfully reported by kernel test robot. I missed to enable kunit tests to build the mctp code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-3/+3
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/atm: remove the atmdev_ops {get, set}sockopt methodsChristoph Hellwig1-12/+2
All implementations of these two methods are dummies that always return -EINVAL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04atm: fix a UAF in lec_arp_clear_vccs()Cong Wang1-10/+10
Gengming reported a UAF in lec_arp_clear_vccs(), where we add a vcc socket to an entry in a per-device list but free the socket without removing it from the list when vcc->dev is NULL. We need to call lec_vcc_close() to search and remove those entries contain the vcc being destroyed. This can be done by calling vcc->push(vcc, NULL) unconditionally in vcc_destroy_socket(). Another issue discovered by Gengming's reproducer is the vcc->dev may point to the static device lecatm_dev, for which we don't need to register/unregister device, so we can just check for vcc->dev->ops->owner. Reported-by: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet1-1/+1
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-23Revert "net: simplify sock_poll_wait"Karsten Graul1-1/+1
This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net: simplify sock_poll_waitChristoph Hellwig1-1/+1
The wait_address argument is always directly derived from the filp argument, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-3/+8
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-17atm: Preserve value of skb->truesize when accounting to vccDavid Woodhouse1-2/+1
ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on which they are to be sent. But it doesn't take ownership of those packets from the sock (if any) which originally owned them. They should remain owned by their actual sender until they've left the box. There's a hack in pskb_expand_head() to avoid adjusting skb->truesize for certain skbs, precisely to avoid messing up sk_wmem_alloc accounting. Ideally that hack would cover the ATM use case too, but it doesn't — skbs which aren't owned by any sock, for example PPP control frames, still get their truesize adjusted when the low-level ATM driver adds headroom. This has always been an issue, it seems. The truesize of a packet increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't for normal traffic, only for control frames. So I think we just got away with it, and we probably needed to send 2GiB of LCP echo frames before the misaccounting would ever have caused a problem and caused atm_may_send() to start refusing packets. Commit 14afee4b609 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") did exactly what it was intended to do, and turned this mostly-theoretical problem into a real one, causing PPPoATM to fail immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* starts refusing to allow new packets. The least intrusive solution to this problem is to stash the value of skb->truesize that was accounted to the VCC, in a new member of the ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that value instead of the then-current value of skb->truesize. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: David Woodhouse <dwmw2@infradead.org> Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26net/atm: convert to ->poll_maskChristoph Hellwig1-8/+3
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-4/+4
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2017-11-30atm: mpoa: remove 32-bit timekeepingTina Ruchandani1-1/+1
net/atm/mpoa_* files use 'struct timeval' to store event timestamps. struct timeval uses a 32-bit seconds field which will overflow in the year 2038 and beyond. Morever, the timestamps are being compared only to get seconds elapsed, so struct timeval which stores a seconds and microseconds field is an overkill. This patch replaces the use of struct timeval with time64_t to store a 64-bit seconds field. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-27net: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena1-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13atm: remove an unnecessary loopFrancois Romieu1-9/+13
Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0 do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff813fcb22>] prepare_to_wait+0x182/0x530 The deeply nested alloc_skb is a problem. Diagnosis: nesting is wrong. It makes zero sense. Fix it and the implicit task state change problem automagically goes away. alloc_skb() does not need to be in the "while" loop. alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ... finish_wait/remove_wait_queue} block. I claim that: - alloc_tx() should only perform the "wait_for_decent_tx_drain" part - alloc_skb() ought to be done directly in vcc_sendmsg - alloc_skb() failure can be handled gracefully in vcc_sendmsg - alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent GFP_{KERNEL / ATOMIC} flag Reported-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-05[iov_iter] new primitives - copy_from_iter_full() and friendsAl Viro1-1/+1
copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-30net: Generalise wq_has_sleeper helperHerbert Xu1-2/+2
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman1-2/+2
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue1-4/+3
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09put iov_iter into msghdrAl Viro1-4/+1
Note that the code _using_ ->msg_iter at that point will be very unhappy with anything other than unshifted iovec-backed iov_iter. We still need to convert users to proper primitives. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24[atm] switch vcc_sendmsg() to copy_from_iter()Al Viro1-11/+6
... and make it handle multi-segment iovecs - deals with that "fix this later" issue for free. A bit of shame, really - it had been there since 2.3.15pre3 when the whole thing went into the tree, practically a historical artefact by now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-05net: Add and use skb_copy_datagram_msg() helper.David S. Miller1-1/+1
This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10atm: Convert pr_warning to pr_warnJoe Perches1-1/+1
Use the more common pr_warn. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa1-2/+0
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07atm: update msg_namelen in vcc_recvmsg()Mathias Krause1-0/+2
The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about vcc_recvmsg() not filling the msg_name in case it was set. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin1-4/+3
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-02atm: add release_cb() callback to vccDavid Woodhouse1-0/+10
The immediate use case for this is that it will allow us to ensure that a pppoatm queue is woken after it has to drop a packet due to the sock being locked. Note that 'release_cb' is called when the socket is *unlocked*. This is not to be confused with vcc_release() — which probably ought to be called vcc_close(). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Krzysztof Mazur <krzysiek@podlesie.net>
2012-11-28atm: add owner of push() callback to atmvccKrzysztof Mazur1-0/+2
The atm is using atmvcc->push(vcc, NULL) callback to notify protocol that vcc will be closed and protocol must detach from it. This callback is usually used by protocol to decrement module usage count by module_put(), but it leaves small window then module is still used after module_put(). Now the owner of push() callback is kept in atmvcc and module_put(atmvcc->owner) is called after the protocol is detached from vcc. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
generated by cgit (git 2.54.0.dirty) at 2026-09-29 05:19:53 +0000