| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once.
Fixes: 76e98a158b20 ("ksmbd: fix race condition between destroy_previous_session() and smb2 operations()")
Reported-by: Cheryl Babcock <cheryl@renat.io>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Print a warning if the sessions procfs entry cannot be created.
Signed-off-by: Ze Tan <tanze@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Port SMB Direct RDMA payload encryption support to the current ksmbd tree.
The current tree already supports all-state lookup for encrypted expired
sessions, so the overlapping lookup hunk from the original patch is
intentionally omitted.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
MS-SMB2 requires the server to disconnect a connection when an
encrypted transform cannot be associated with a session or fails
authenticated decryption. This includes an encrypted request that
still carries a SessionId invalidated through PreviousSessionId.
Move the connection to EXITING and shut down its transport when
decrypt_req() fails. Add the missing TCP shutdown callback so a receive
blocked in kernel_recvmsg() is released; SMB Direct already provides
the corresponding callback.
Plaintext requests using an invalidated SessionId do not take this
path and continue to receive STATUS_USER_SESSION_DELETED.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ksmbd_all_conn_set_status() treats every connection whose transient
binding flag is set as belonging to the target SessionId. A logoff or
session replacement can consequently move an unrelated connection to
NEED_RECONNECT or NEED_SETUP.
Pass the target session itself and select connections using either the
connection-local session xarray or the session's permanent channel list.
Use the same association test while waiting for requests to drain.
Serialize session-wide status changes under request_lock and do not
overwrite EXITING or RELEASING. Protect the shutdown transition with the
same lock so a concurrent session update cannot revive a closing
connection.
Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel")
Fixes: abcc506a9a71 ("ksmbd: fix racy issue from smb2 close and logoff with multichannel")
Fixes: c444139cb747 ("ksmbd: rewrite stop_sessions() with restartable iteration")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
struct ksmbd_conn contains an embedded struct ntlmssp_auth with the
ciphertext[] and cryptkey[] arrays, so to avoid leaking this information
via the heap, it should be freed with kfree_sensitive().
While we're at it, also use kfree_sensitive() for freeing preauth_info
in ksmbd_conn_free() to avoid that the Preauth_HashValue[] could leak
via the heap here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
SMB3.1.1 multichannel binding preserves the preauthentication hash in a
preauth_session between the NTLM negotiate and authenticate requests.
The binding NTLM negotiate allocates this object and returns
STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends
the authenticate request, neither the authenticate nor error cleanup paths
free the object.
Release any remaining preauthentication sessions when tearing down the
connection. Initialize the list when allocating the connection so that this
cleanup is safe regardless of the negotiated dialect.
Reported-by: Runa Takemoto <takemotoruna223@gmail.com>
Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
An async request may still be waiting when a connection is closed.
This can stop the connection from closing.
Cancel active async requests before waiting for them to finish.
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ksmbd tracked only credit counts (total_credits/outstanding_credits) and
never validated the MessageId of an incoming request. As a result a
request carrying a MessageId outside the granted range was accepted, a
MessageId could be replayed, and a 64-bit sequence wrap was not detected.
Maintain a command sequence window per connection:
- [seq_low, seq_high) is the range of granted sequence numbers and
seq_bitmap records which of them have been granted but not yet
consumed. The window starts as { 0 } at connection setup.
- smb2_set_rsp_credits() extends seq_high by the number of credits it
grants (setting the corresponding bits), capped so the window never
spans more than KSMBD_CMD_SEQ_WINDOW (== SMB2_MAX_CREDITS) sequence
numbers. This implements the "limit the range of acceptable
sequence numbers" allowance and keeps seq_bitmap usable as a ring.
- smb2_check_sequence_number(), run for every SMB2 request from
ksmbd_smb2_check_message(), verifies that the CreditCharge
consecutive sequence numbers starting at MessageId lie within the
window and have not already been consumed, then removes them and
slides seq_low forward. CANCEL consumes nothing. A violation
(out of window, replay, or wrap) tears the connection down.
The legacy SMB1 multi-protocol negotiate occupies sequence number 0 but
does not pass through ksmbd_smb2_check_message(), so it consumes that
sequence number explicitly; otherwise seq_low would stay pinned at 0
after the upgrade to SMB2 and eventually stall credit grants.
For an in-order client seq_high - seq_low equals total_credits, so the
window-room cap never reduces the number of credits granted. it only
engages for a client that withholds low sequence numbers.
init_smb2_max_credits() now clamps the configured maximum to
SMB2_MAX_CREDITS so the window (and its bitmap) can always represent
every outstanding sequence number.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The clients proc file currently shows only a small subset of the state
needed to diagnose stalled or mis-negotiated connections.
Report the transport, connection state, outstanding and total credits,
session count, lifetime request count, and negotiated signing, encryption,
compression, and POSIX features. Report each connection as a key/value
record rather than a wide fixed-width table.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The ksmbd procfs monitoring files produce misleading or malformed output.
The constant-name helper uses a bitwise test for enum values. This omits
zero-valued constants and can print multiple names for one lease state. It
also unconditionally emits a newline, splitting entries in the open-file
table across two lines. Session capabilities are printed as numeric flag
values even though a table of descriptive names is available.
Use exact matching for enum values. Print flag names as a comma-separated
list, preserving unknown bits as hexadecimal values. Let callers control
line termination so each open-file entry remains on one line. Print common
session properties once, and report signing and encryption independently.
Adjust client and open-file column widths for IPv6 addresses and 64-bit
file IDs, and fix the misspelled OPLOCK_EXCLUSIVE name. Also expose and
maintain the total request count alongside the per-command counters.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Two kernel_sendmsg() calls can still use the same TCP skb if the first skb
can take more data. This can happen when ksmbd sends two SMB2 responses
very close to each other.
Without MSG_EOR, TCP can append the next sendmsg data to the previous skb.
Then STATUS_PENDING and the later response can be put into the same TCP
skb. MSG_EOR marks the skb as end of record, so TCP will not collapse the
next sendmsg data into it.
Example:
smbtorture //${server_ip}/export -U${username}%${password} smb2.compound_async.write_write
Client request:
Write Request Len:64 Off:0, File: compound_async_write_write; Write Request Len:64 Off:64
Before this patch, server responses:
Write Response, File: compound_async_write_write
Write Response
SMB2, STATUS_PENDING, Write Response, MessageId 7
SMB2, Write Response, MessageId 7
After this patch:
Write Response, File: compound_async_write_write
Write Response, Error: STATUS_PENDING
Write Response
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Put the arguments of ksmbd_transport_ops ->writev() into a struct.
This makes the function call shorter and easier to read.
Add __ksmbd_conn_write() for the common write code. A later patch will use
it for another write helper.
No functional change.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ksmbd_conn_handler_loop() caps a request from an unauthenticated
connection at SMB3_MAX_MSGSIZE, and only allows the larger
SMB3_MAX_MSGSIZE + conn->vals->max_write_size once the connection has
authenticated.
ksmbd_decompress_request() runs inside that same loop but applies the
authenticated limit unconditionally, and then allocates from it. The
unauthenticated cap is not re-applied afterwards, as the caller only
refreshes pdu_size from the new RFC1002 header.
An unauthenticated client that negotiates SMB 3.1.1 with a compression
context can therefore send a 104 byte chained transform whose
OriginalCompressedSegmentSize is SMB3_MAX_MSGSIZE + max_write_size and
have ksmbd kvmalloc() that much memory, 4210693 bytes by default. The
payload costs the client nothing, because a SMB3_COMPRESS_PATTERN
payload expands an eight byte structure into arbitrarily many output
bytes.
The decompressed PDU is rejected later by ksmbd_smb2_check_message(),
but that happens in the worker, after the allocation has been made and
conn->req_running has been incremented, and it results in an error
response rather than dropping the connection. A client that stops
reading its socket keeps each work queued for up to KSMBD_TCP_SEND_TIMEOUT
while ksmbd_conn_write() holds conn->srv_mutex, so the allocations
accumulate up to server_conf.max_inflight_req per connection.
Move the limit into ksmbd_max_allowed_pdu_size() and call it from both
sites, so the authentication state is consulted in one place and the two
ceilings cannot drift apart again.
Fixes: a08de24c2b85 ("ksmbd: negotiate and decode SMB2 compression")
Signed-off-by: Sujal Tuladhar <sujaltuladhar1231@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.
Fixes: 368ba06881c3 ("ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-31063
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse the SMB 3.1.1 compression capabilities context and negotiate LZ77
with optional chained Pattern_V1 support.
Advertise compression on tree connections and decode compressed requests
before normal SMB dispatch.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel test robot reported W=1 build warnings for ksmbd_conn_get()
and ksmbd_conn_put() due to missing parameter descriptions.
Add the @conn description to fix these warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_conn_free() is one of four sites that can observe the last
refcount drop of a struct ksmbd_conn. The other three
fs/smb/server/connection.c ksmbd_conn_r_count_dec()
fs/smb/server/oplock.c __free_opinfo()
fs/smb/server/vfs_cache.c session_fd_check()
end the conn with a bare kfree(), skipping
ida_destroy(&conn->async_ida) and
conn->transport->ops->free_transport(conn->transport). Whenever one
of them is the last putter, the embedded async_ida and the entire
transport struct leak -- for TCP, that is also the struct socket and
the kvec iov.
__free_opinfo() being a final putter is not theoretical. opinfo_put()
queues the callback via call_rcu(&opinfo->rcu, free_opinfo_rcu), so
ksmbd_server_terminate_conn() can deposit N opinfo releases in RCU and
have ksmbd_conn_free() run in the handler thread before any of them
fire. ksmbd_conn_free() then observes refcnt > 0 and short-circuits;
the last RCU-delivered __free_opinfo() falls onto its bare kfree(conn)
branch and the transport is lost.
A/B validation in a QEMU/virtme guest, mounting //127.0.0.1/testshare:
each iteration holds 8 files open via sleep processes, force-closes
TCP with "ss -K sport = :445", kills the holders, lazy-umounts;
repeated 10 times, then ksmbd shutdown and kmemleak scan.
state conn_alloc conn_free tcp_free opi_rcu kmemleak
---------- ---------- --------- -------- ------- --------
pre-patch 20 20 10 160 7
with patch 20 20 20 160 0
Pre-patch conn_free=20 with tcp_free=10 directly demonstrates the
bare-kfree paths skipping transport cleanup; kmemleak backtraces point
into struct tcp_transport / iov. With this patch tcp_free matches
conn_free at 20/20 and kmemleak is clean.
Move the per-struct final release into __ksmbd_conn_release_work() and
route the three bare-kfree final-put sites through a new
ksmbd_conn_put(). Those sites now pair ida_destroy() and
free_transport() with kfree(conn) regardless of which holder happens
to release the last reference. stop_sessions() only triggers the
transport shutdown and does not itself drop the last conn reference,
so it is unaffected.
The centralized release reaches sock_release() -> tcp_close() ->
lock_sock_nested() (might_sleep) from every final putter, including
__free_opinfo() invoked from an RCU softirq callback, which trips
CONFIG_DEBUG_ATOMIC_SLEEP. Defer the release to a dedicated
ksmbd_conn_wq workqueue so ksmbd_conn_put() is safe from any
non-sleeping context.
Make ksmbd_file own a strong connection reference while fp->conn is
non-NULL so durable-preserve and final-close paths cannot dereference
a stale connection. ksmbd_open_fd() and ksmbd_reopen_durable_fd()
take the reference via ksmbd_conn_get() (the latter also reorders the
fp->conn / fp->tcon assignments before __open_id() so the published fp
is never observed with fp->conn == NULL); session_fd_check() and
__ksmbd_close_fd() drop it via ksmbd_conn_put(). With that invariant,
session_fd_check() can take a local conn pointer once and use it
across the m_op_list and lock_list iterations even though op->conn
puts may otherwise drop the last reference.
At module exit the workqueue is flushed and destroyed after
rcu_barrier(), so any release queued by a trailing RCU callback is
drained before the inode hash and module text go away.
Fixes: ee426bfb9d09 ("ksmbd: add refcnt to ksmbd_conn struct")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
stop_sessions() walks conn_list with hash_for_each() and, for every
entry, drops conn_list_lock across the transport ->shutdown() call
before re-acquiring the read lock to continue the loop. The hash
walk relies on cross-iteration state (the current bucket and the
hlist position), which is not preserved across unlock/relock: if
another thread performs a list mutation during the unlocked window,
the ongoing iteration becomes unreliable and can re-visit
connections that have already been handled or skip connections that
have not. The outer `if (!hash_empty(conn_list)) goto again;` retry
masks the symptom in the common case but does not address the
unsafe iteration itself.
Reframe the loop so it never relies on iterator state across
unlock/relock. Under conn_list_lock held for read, pick the first
connection whose ->shutdown() has not yet been issued by this path,
pin it by taking an extra reference, record that fact on the
connection and mark it EXITING while still inside the locked walk,
then drop the lock. Then call ->shutdown() outside the lock, drop
the pin (freeing the connection if the handler already released its
reference), and restart from the top.
Use a new per-connection flag, conn->stop_called, as the "shutdown
issued from stop_sessions()" marker rather than reusing the status
state. ksmbd_conn_set_exiting() is also invoked by
ksmbd_sessions_deregister() on sibling channels of a multichannel
session without issuing a transport shutdown, so treating
KSMBD_SESS_EXITING as "already handled here" would skip connections
that still need shutdown() to wake their handler out of recv(),
leaving the outer retry waiting indefinitely for the hash to drain.
stop_sessions() is serialised by init_lock in
ksmbd_conn_transport_destroy(), so writing stop_called under the
read lock has no other writer.
Set EXITING inside the locked walk so the selection, the stop_called
marker, and the status transition all happen together, and guard
against regressing a connection that has already advanced to
KSMBD_SESS_RELEASING on its own (for example, if the handler exited
its receive loop for an unrelated reason between teardown steps).
When the pin drop is the last put, release the transport and pair
ida_destroy(&target->async_ida) with the ida_init() done in
ksmbd_conn_alloc(), so stop_sessions() retiring a connection on its
own does not leak the xarray backing of the embedded async_ida.
The outer retry with msleep() is kept to wait for handler threads to
reach ksmbd_conn_free() and drain the hash.
Observed with an instrumented build that logs one line per visit and
widens the unlocked window before ->shutdown() by 200 ms, under
five concurrent cifs mounts (nosharesock, one connection each):
* Current code: the same connection address is revisited many
times during a single stop_sessions() call and ->shutdown() is
invoked well beyond the number of live connections before the
hash finally drains.
* Rewritten code: each live connection produces exactly one
->shutdown() call; the function returns as soon as the hash is
empty.
Functional teardown via `ksmbd.control --shutdown` with the same
five mounts completes cleanly on the rewritten path.
Performance is observably unchanged. Tearing down N concurrent
nosharesock cifs connections with `ksmbd.control --shutdown` +
`rmmod ksmbd` takes essentially the same wall time before and after
the rewrite:
N before after
10 4.93s 5.34s
30 7.34s 7.03s
50 7.31s 7.01s (3-run avg: 7.04s vs 7.25s)
100 6.98s 6.78s
200 6.77s 6.89s
and the number of ->shutdown() calls equals the number of live
connections on both paths when the race is not widened. The
teardown is dominated by the msleep(100)-based outer retry waiting
for handler threads to run ksmbd_conn_free(), not by the iteration
itself; the restartable loop's worst-case O(N^2) visit cost is in
the microseconds even at N=200 and sits far below the msleep(100)
granularity.
Applied alone on top of ksmbd-for-next-next, this patch does not
introduce a new leak site. Under the same reproducer (10x
concurrent-holders + ss -K + ksmbd.control --shutdown + rmmod), the
tree still shows the pre-existing per-connection transport leak
count that arises when the last refcount drop lands in one of
ksmbd_conn_r_count_dec(), __free_opinfo() or session_fd_check() -
all of which end with a bare kfree() today. kmemleak backtraces
for the unreferenced objects point into the TCP accept path
(sk_clone -> inet_csk_clone_lock, sock_alloc_inode) and none
involve stop_sessions(). Plugging those bare-kfree sites is the
responsibility of the follow-up patch.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When per-connection async_ida was converted from a dynamically
allocated ksmbd_ida to an embedded struct ida, ksmbd_ida_free() was
removed from the connection teardown path but no matching
ida_destroy() was added. The connection is therefore freed with the
IDA's backing xarray still intact.
The kernel IDA API expects ida_init() and ida_destroy() to be paired
over an object's lifetime, so add the missing cleanup before the
connection is freed.
No leak has been observed in testing; this is a pairing fix to match
the IDA lifetime rules, not a response to a reproduced regression.
Fixes: d40012a83f87 ("cifsd: declare ida statically")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
rcount is intended to be connection-specific: 2 for curr_conn, 1 for
every other connection sharing the same session. However, it is
initialised only once before the hash iteration and is never reset.
After the loop visits curr_conn, later sibling connections are also
checked against rcount == 2, so a sibling with req_running == 1 is
incorrectly treated as idle. This makes the outcome depend on the
hash iteration order: whether a given sibling is checked against the
loose (< 2) or the strict (< 1) threshold is decided by whether it
happens to be visited before or after curr_conn.
The function's contract is "wait until every connection sharing this
session is idle" so that destroy_previous_session() can safely tear
the session down. The latched rcount violates that contract and
reopens the teardown race window the wait logic was meant to close:
destroy_previous_session() may proceed before sibling channels have
actually quiesced, overlapping session teardown with in-flight work
on those connections.
Recompute rcount inside the loop so each connection is compared
against its own threshold regardless of iteration order.
This is a code-inspection fix for an iteration-order-dependent logic
error; a targeted reproducer would require SMB3 multichannel with
in-flight work on a sibling channel landing after curr_conn in hash
order, which is not something that can be triggered reliably.
Fixes: 76e98a158b20 ("ksmbd: fix race condition between destroy_previous_session() and smb2 operations()")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is no longer needed for smbdirect.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel ASN.1 BER decoder calls action callbacks incrementally as it
walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken
[2] OCTET STRING element, ksmbd_neg_token_alloc() allocates
conn->mechToken immediately via kmemdup_nul(). If a later element in
the same blob is malformed, then the decoder will return nonzero after
the allocation is already live. This could happen if mechListMIC [3]
overrunse the enclosing SEQUENCE.
decode_negotiation_token() then sets conn->use_spnego = false because
both the negTokenInit and negTokenTarg grammars failed. The cleanup at
the bottom of smb2_sess_setup() is gated on use_spnego:
if (conn->use_spnego && conn->mechToken) {
kfree(conn->mechToken);
conn->mechToken = NULL;
}
so the kfree is skipped, causing the mechToken to never be freed.
This codepath is reachable pre-authentication, so untrusted clients can
cause slow memory leaks on a server without even being properly
authenticated.
Fix this up by not checking check for use_spnego, as it's not required,
so the memory will always be properly freed. At the same time, always
free the memory in ksmbd_conn_free() incase some other failure path
forgot to free it.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The newly added procfs code fails to build when CONFIG_IPv6 is disabled:
fs/smb/server/connection.c: In function 'proc_show_clients':
fs/smb/server/connection.c:47:58: error: 'struct ksmbd_conn' has no member named 'inet6_addr'; did you mean 'inet_addr'?
47 | seq_printf(m, "%-20pI6c", &conn->inet6_addr);
| ^~~~~~~~~~
| inet_addr
make[7]: *** [scripts/Makefile.build:279: fs/smb/server/connection.o] Error 1
fs/smb/server/mgmt/user_session.c: In function 'show_proc_sessions':
fs/smb/server/mgmt/user_session.c:215:65: error: 'struct ksmbd_conn' has no member named 'inet6_addr'; did you mean 'inet_addr'?
215 | seq_printf(m, " %-40pI6c", &chan->conn->inet6_addr);
| ^~~~~~~~~~
| inet_addr
Rearrange the condition to allow adding a simple preprocessor conditional.
Fixes: b38f99c1217a ("ksmbd: add procfs interface for runtime monitoring and statistics")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch introduces a /proc filesystem interface to ksmbd, providing
visibility into the internal state of the SMB server. This allows
administrators and developers to monitor active connections, user
sessions, and opened files in real-time without relying on external
tools or heavy debugging.
Key changes include:
- Connection Monitoring (/proc/fs/ksmbd/clients): Displays a list of
active network connections, including client IP addresses, SMB dialects,
credits, and last active timestamps.
- Session Management (/proc/fs/ksmbd/sessions/): Adds a global sessions
file to list all authenticated users and their session IDs.
- Creates individual session entries (e.g., /proc/fs/ksmbd/sessions/<id>)
detailing capabilities (DFS, Multi-channel, etc.), signing/encryption
algorithms, and connected tree shares.
- File Tracking (/proc/fs/ksmbd/files): Shows all currently opened files
across the server, including tree IDs, process IDs (PID), access modes
(daccess/saccess), and oplock/lease states.
- Statistics & Counters: Implements internal counters for global server
metrics, such as the number of tree connections, total sessions, and
processed read/write bytes.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Bahubali B Gumaji <bahubali.bg@samsung.com>
Signed-off-by: Sang-Soo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The minimum SMB2 PDU size should be updated to the size of
`struct smb2_pdu` (that is, the size of `struct smb2_hdr` + 2).
Suggested-by: David Howells <dhowells@redhat.com>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the RFC1002 header has been removed from `struct smb_hdr`,
the minimum SMB1 PDU size should be updated as well.
Fixes: 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr")
Suggested-by: David Howells <dhowells@redhat.com>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With the removal of the RFC1002 length field from the SMB header,
smb2_get_msg is now used to get the smb1 request from the request buffer.
Since this function is no longer exclusive to smb2 and now supports smb1
as well, This patch rename it to smb_get_msg to better reflect its usage.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace connection list with hash table to improve lookup performance.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Meetakshi Setiya <meetakshisetiyaoss@gmail.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()!
Otherwise already existing connections try to use smb_direct_wq as
a NULL pointer.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
free_transport function for tcp connection can be called from smbdirect.
It will cause kernel oops. This patch add free_transport ops in ksmbd
connection, and add each free_transports for tcp and smbdirect.
Fixes: 21a4e47578d4 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_work could be freed when after connection release.
Increment r_count of ksmbd_conn to indicate that requests
are not finished yet and to not release the connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We need to know how many pending requests are left at the end of server
shutdown. That means we need to know how long the server will wait
to process pending requests in case of a server shutdown.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
use msleep instaed of schedule_timeout_interruptible()
to guarantee the task delays as expected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Prefer to report ENOMEM rather than incur the oom for allocations in
ksmbd. __GFP_NORETRY could not achieve that, It would fail the allocations
just too easily. __GFP_RETRY_MAYFAIL will keep retrying the allocation
until there is no more progress and fail the allocation instead go OOM
and let the caller to deal with it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If Client send simultaneous SMB operations to ksmbd, It exhausts too much
memory through the "ksmbd_work_cache”. It will cause OOM issue.
ksmbd has a credit mechanism but it can't handle this problem. This patch
add the check if it exceeds max credits to prevent this problem by assuming
that one smb request consumes at least one credit.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixed some confusing typos that were currently identified witch codespell,
the details are as follows:
-in the code comments:
fs/smb/common/smb2pdu.h:9: specfication ==> specification
fs/smb/common/smb2pdu.h:494: usally ==> usually
fs/smb/common/smb2pdu.h:1064: Attrubutes ==> Attributes
fs/smb/server/connection.c:28: cleand ==> cleaned
fs/smb/server/ksmbd_netlink.h:216: struture ==> structure
fs/smb/server/oplock.c:799: conains ==> contains
fs/smb/server/oplock.c:1487: containted ==> contained
fs/smb/server/server.c:282: proccessing ==> processing
fs/smb/server/smb_common.c:491: comforms ==> conforms
fs/smb/server/xattr.h:102: ATTRIBUITE ==> ATTRIBUTE
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
operations()
If there is ->PreviousSessionId field in the session setup request,
The session of the previous connection should be destroyed.
During this, if the smb2 operation requests in the previous session are
being processed, a racy issue could happen with ksmbd_destroy_file_table().
This patch sets conn->status to KSMBD_SESS_NEED_RECONNECT to block
incoming operations and waits until on-going operations are complete
(i.e. idle) before desctorying the previous session.
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25040
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The race is between the handling of a new TCP connection and
its disconnection. It leads to UAF on `struct tcp_transport` in
ksmbd_tcp_new_connection() function.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22991
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel thread function ksmbd_conn_handler_loop() invokes
the try_to_freeze() in its loop. But all the kernel threads are
non-freezable by default. So if we want to make a kernel thread to be
freezable, we have to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The connection could be binded to the existing session for Multichannel.
session will be destroyed when binded connections are released.
So no need to wait for that's connection at logoff.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Thread A + Thread B
ksmbd_session_lookup | smb2_sess_setup
sess = xa_load |
|
| xa_erase(&conn->sessions, sess->id);
|
| ksmbd_session_destroy(sess) --> kfree(sess)
|
// UAF! |
sess->last_active = jiffies |
+
This patch add rwsem to fix race condition between ksmbd_session_lookup
and ksmbd_expire_session.
Reported-by: luosili <rootlab@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If ->iov_idx is zero, This means that the iov vector for the response
was not added during the request process. In other words, it means that
there is a problem in generating a response, So this patch return as
an error to avoid NULL pointer dereferencing problem.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
