regulator: qcom_usb_vbus: add support for qcom,pm4125-vbus-reg

The PM4125 PMIC uses a different register layout for USB VBUS control
compared to PM8150B. On PM4125, CMD_OTG is at offset 0x50, OTG_CFG is
at 0x56, and offset 0x52 is a 2-bit VBOOST voltage selector rather than
a current-limit selector.

Add pm4125_data using the abstraction introduced for PM8150B, along with
dedicated voltage-selector ops and the pm4125_vboost_table covering the
four supported boost voltages: 4.25 V, 4.5 V, 4.75 V, and 5.0 V.

Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-add_pm4125-vbus-reg-v3-3-999d78a87b81@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 31 insertions, 0 deletions

diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c
index 0201a3983981..9aea68876284 100644
--- a/drivers/regulator/qcom_usb_vbus-regulator.c
+++ b/drivers/regulator/qcom_usb_vbus-regulator.c
@@ -20,6 +20,12 @@
 #define OTG_CFG				0x53
 #define OTG_EN_SRC_CFG			BIT(1)
 
+#define PM4125_VBOOST_EN		0x50
+#define PM4125_VBOOST_SEL		0x52
+#define PM4125_VBOOST_CFG_MASK		GENMASK(1, 0)
+#define PM4125_VBOOST_CFG		0x56
+#define PM4125_VBOOST_EN_SRC_CFG	BIT(0)
+
 struct qcom_usb_vbus_reg_data {
 	u16 cmd_otg;
 	u16 otg_cfg;
@@ -39,6 +45,10 @@ static const unsigned int curr_table[] = {
 	500000, 1000000, 1500000, 2000000, 2500000, 3000000,
 };
 
+static const unsigned int pm4125_vboost_table[] = {
+	4250000, 4500000, 4750000, 5000000,
+};
+
 static const struct regulator_ops qcom_usb_vbus_reg_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -58,6 +68,26 @@ static const struct qcom_usb_vbus_reg_data pm8150b_data = {
 	.ops = &qcom_usb_vbus_reg_ops,
 };
 
+static const struct regulator_ops qcom_usb_vbus_pm4125_reg_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_table,
+};
+
+static const struct qcom_usb_vbus_reg_data pm4125_data = {
+	.cmd_otg = PM4125_VBOOST_EN,
+	.otg_cfg = PM4125_VBOOST_CFG,
+	.otg_en_src_cfg = PM4125_VBOOST_EN_SRC_CFG,
+	.vsel_reg = PM4125_VBOOST_SEL,
+	.vsel_mask = PM4125_VBOOST_CFG_MASK,
+	.volt_table = pm4125_vboost_table,
+	.n_voltages = ARRAY_SIZE(pm4125_vboost_table),
+	.ops = &qcom_usb_vbus_pm4125_reg_ops,
+};
+
 static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -135,6 +165,7 @@ static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev)
 
 static const struct of_device_id qcom_usb_vbus_regulator_match[] = {
 	{ .compatible = "qcom,pm8150b-vbus-reg", .data = &pm8150b_data },
+	{ .compatible = "qcom,pm4125-vbus-reg",  .data = &pm4125_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match);