| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
In case of an upgrade from four to five level page tables, and a failing
pgd allocation, the exit path of crst_table_upgrade() would incorrectly
dereference the p4d NULL pointer via pagetable_dtor().
Address this by reworking crst_table_upgrade(), which basically is a
revert of [1]. Take into account that GFP_KERNEL order-2 allocation
failures are very unlikely. Therefore keep the code as simple as
possible:
In case of an upgrade from three to five levels, and an allocation
failure of the fifth page table level, keep the upgrade to four levels
instead of reverting back to three levels. This allows to keep error
handling minimal.
[1] commit 31932757c612 ("s390/mm: optimize page table upgrade routine")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The facilities and debug-alternative command line parsers iterate over
inclusive numeric ranges. If a range ends at ULONG_MAX, incrementing the
current value wraps to zero and the loop never terminates. Large finite
out-of-range values also cause unnecessary early boot iterations even
though the bitmap helpers ignore them.
Stop each loop at the size of the bitmap it modifies. This preserves all
meaningful range values while guaranteeing termination.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A command line may occupy all but the terminating byte of
COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size
to the IPL parameter conversion helpers and points the destination one
byte past early_command_line. The helpers subtract one from the unsigned
size and write the converted parameter outside the command line buffer.
Convert the IPL parameter in the command line parsing buffer first. A
parameter beginning with '=' can then replace the existing command line
regardless of its length, while other parameters are appended only when
space remains.
Fixes: 5ecb2da660ab ("s390: support command lines longer than 896 bytes")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
search_mem_end() calculates the number of 1MB blocks with a signed int
literal. CONFIG_MAX_PHYSMEM_BITS values of 51 and above either overflow
the signed int or shift beyond its width. This produces an invalid search
range when the binary-search memory detection fallback is used.
Use an unsigned long literal so the full supported physical address range
is represented.
Fixes: 54c57795e848 ("s390/mem_detect: replace tprot loop with binary search")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
s390 implementation of cpu capacity management infrastructure code does
not do anything different than its common code counterpart. Switch to
common code functions and remove the smp_cpu_*_capacity() functions.
Make s390 code better align with other architectures which utilize
cpu_capacity. No functional changes.
Allow cpu_capacity attributes inside sysfs to accurately reflect cpu
capacity.
ex:
$ cat /sys/devices/system/cpu/cpu0/polarization
vertical:high
$ cat /sys/devices/system/cpu/cpu0/cpu_capacity
1024
$ cat /sys/devices/system/cpu/cpu40/polarization
vertical:low
$ cat /sys/devices/system/cpu/cpu40/cpu_capacity
128
Prior to commit 6bceea7a1e07 ("arch_topology: Relocate cpu_scale to
topology.[h|c]") cpu_capacity attribute was only available to the common
arch_topology driver's users. Reflect the correct values to the newly
made available attributes.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The pai debug feature is registered with 256 areas, where each area
contains 32 pages. This sums up to a total of 32MiB. The code does not use
any debug exceptions, which means that 255 of those areas are never
used. In addition all existing debug feature calls have a lower level (5)
than the default level (3).
This in turn means that without user interaction the debug feature is
unused.
Reduce the number of areas to 1, and also reduce the number of pages for
the remaining area to 1. Since user interaction is required, the user can
also increase the size of the remaining area, instead of wasting memory by
default.
This reduces the total size of the debug feature to 4KiB.
Fixes: a3f8423622ef ("s390/pai_crypto: Add PAI crypto characteristics table for parameters")
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() --> PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples().
Fixes: 9f66572f2889 ("s390/pai_crypto: Enable per-task and system-wide sampling event")
Fixes: 582cc1b28e8c ("s390/pai_ext: Enable per-task and system-wide sampling event")
Cc: stable@vger.kernel.org # v6.19+
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When diag324 reports -EBUSY, the error code is
overwritten by the result of copy_to_user() and put_user(). As a result,
the ioctl may incorrectly return success instead of -EBUSY.
Preserve the original diag324 return code and only return -EFAULT when
copying data to userspace fails.
Fixes: 90e6f191e1ee ("s390/diag324: Retrieve power readings via diag 0x324")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
While report_error_write() checks that the provided buffer is at least
as large as the header struct, but not that it is large enough to
contain the report with the length claimed by report->length. If
user-space provides a short buffer, meaning a larger report->length than
the actually written payload, up to around 4K of kernel data from past
the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter()
will leak into the SCLP report.
However, as the entity processing the SCLP is privileged and able to
access at least the page including the report, this does not leak data
that entity could not access but it is still an out of bounds read and
a malformed error report that should be rejected.
Fixes: 368704a65be8 ("s390/pci: add report_error attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Unlike kdump, which passes the re-IPL parameter block through os_info,
the stand-alone dump passes it through the IPL parm block address and
checksum in lowcore.
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not
provide an IPL parameter block. In this case reipl_type_init() selects
IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless,
dump_reipl_run() unconditionally dereferences it when preparing the
lowcore fields. This may happen to work by chance when address zero
contains readable lowcore data. A zero IPL parameter block address is
then stored in lowcore, causing the stand-alone dumper to enter disabled
wait after completing the dump.
Explicitly store a zero IPL parameter block address and checksum when no
re-IPL parameter block is available. This does not change the behavior:
the stand-alone dumper completes the dump and halts, while valid re-IPL
parameter blocks continue to be handled as before.
Fixes: 099b76513992 ("[S390] Automatic IPL after dump")
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might
not provide an IPL parameter block. In this case, reipl_type_init()
selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL.
kdump passes the re-IPL parameter block to the dump kernel through
os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl
block checksum calculation"), the os_info entry was added only for
IPL types which initialized reipl_block_actual. That commit moved the
os_info update to machine_crash_shutdown(), making it unconditional. As
a result, set_os_info_reipl_block() dereferences reipl_block_actual for
IPL_TYPE_UNKNOWN. This may happen to work by chance when address zero
contains readable lowcore data and the resulting empty os_info entry is
ignored by the dump kernel.
Skip the os_info update when no re-IPL parameter block is available.
Kdump then collect the dump and reboot without setting re-IPL parameter
block.
Fixes: 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Stop KMSAN from complaining about CPACF outputs being uninitialized.
Do not unpoison variable-length parameter blocks: mapping function
codes (like CPACF_KIMD_SHA_256) to lengths will be ugly. So let the
callers do this once the need arises.
Also do not touch cpacf_kma(): this wrapper does not handle cc 1 and
cc2 at the moment and has to be reworked.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Christoph Schlameuss and Alexander Egorenkov reported a data-race
reported by KCSAN when jiffies_64 is read:
==================================================================
BUG: KCSAN: data-race in do_account_vtime / tick_do_update_jiffies64
write to 0x0000016599ea8600 of 8 bytes by interrupt on cpu 6:
tick_do_update_jiffies64+0x140/0x250
=============================================================>
BUG: KCSAN: data-race in do_account_vtime / tick_do_update_ji>
write to 0x0000016599ea8600 of 8 bytes by interrupt on cpu 6:
tick_do_update_jiffies64+0x140/0x250
tick_nohz_handler+0x2e6/0x300
__run_hrtimer+0x156/0x4d0
__hrtimer_run_queues+0xd2/0x150
...
system_call+0x72/0x90
read to 0x0000016599ea8600 of 8 bytes by interrupt on cpu 12:
do_account_vtime+0x7d6/0x860
vtime_flush+0x26/0xe0
update_process_times+0x32/0x160
tick_nohz_handler+0x12a/0x300
...
system_call+0x72/0x90
value changed: 0x00000000ffffaa6c -> 0x00000000ffffaa6d
...
=============================================================>
Problem is that jiffies_64 instead of jiffies is used. Both are at the
same address, but only jiffies is of volatile type, which prevents this
warning.
Change the vtime code so jiffies instead of jiffies_64 is used
everywhere. This addresses also the inconsistency that both jiffies and
jiffies_64 were used in the original patch which introduced this.
Fixes: f341b8dff982 ("s390/vtime: limit MT scaling value updates")
Reported-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
(Lorenzo Stoakes)
Index MAP_PRIVATE file-backed folios by their anonymous page offset
to resolve confusion around reverse mapping for zeroed and CoW'd
file-backed memory.
Use this new VMA anonymous page offset tracking to eliminate index
conflicts and lay the foundation for scalable CoW performance
improvements.
- "promote mapped executable folios after first usage for MGLRU"
(Baolin Wang)
Make MGLRU's protection of mapped executable file folios more
reliable. Follow the classical LRU's logic, promoting mapped
executable file folios after their first usage to give executable
code a better chance to stay in memory and improve workload
performance.
- "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
Chen)
Fix per-node proactive reclaim interface's ignoring the swappiness
parameter when CONFIG_MEMCG is disabled by consolidating
sc_swappiness() into a single function that checks
proactive_swappiness regardless of kernel configuration.
- "mm/vmscan: reduce lru_lock contention via vmstat-derived
scan-balance cost" (Usama Arif)
Reduce lru_lock contention in the reclaim path by deriving
scan-balance costs from vmstat counters rather than lock-acquired
producer updates.
Read and decay these cost signals on the reclaim side under a
dedicated per-lruvec lock, reducing total LRU lock wait time by over
60% without impacting scan throughput.
- "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)
Fix two low-risk zram bugs which Sashiko spotted in drive-by review.
- "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
memcg" (Zi Yan)
Fix xas_split_alloc() by enabling target folio memcg charging during
splits and adding the missing __GFP_ACCOUNT flag for proper XArray
node memory accounting.
- "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)
Replace hardcoded binary names in selftests/mm/.gitignore with a
generic pattern-matching rule to automatically ignore generated test
files and avoid manual updates when adding new tests.
- "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)
Make the incompatibility between FLATMEM and NUMA explicit in
mm/Kconfig and remove the unused pgdat_page_ext_init() function.
- "zram: fix zstd error paths and add parameter validation" (Haoqin
Huang)
Clean up zram compression backends by removing redundant error
cleanup, adding parameter and dictionary validation, auto-prefixing
algorithm error logs, and resetting parameters prior to
reinitialization.
- "zram: fix stale scan bounds after reinitialization" (Longlong Xia)
Prevent out-of-bounds slot accesses during concurrent zram resets by
moving table scan bound calculations under dev_lock in
writeback_store() and read_block_state().
- "add anon mTHP collapse test cases" (Baolin Wang)
Extend selftests helper functions to support arbitrary page orders
and add new test cases and options for mTHP collapse in khugepaged.
- "selftests/mm: Handle unsupported and transient test conditions"
(Muhammad Usama Anjum)
Update MM selftests to report a SKIP status instead of a failure when
required kernel or filesystem features are unsupported, while adding
retry logic for transient page migration errors.
- "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)
Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
and extend shrink_memcg() to support batch writeback for improved
writeback efficiency.
- "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
Baghdasaryan)
Introduce an IOCTL-based binary interface for memory allocation
profiling that enables kernel-side filtering before per-CPU counter
aggregation.
This eliminates the text-parsing overhead of /proc/allocinfo and
provides up to a 20x speedup by transferring only filtered allocation
data to userspace.
- "better block swap batching and a different take on swap_ops v5"
(Christoph Hellwig)
Refactor block swap I/O to use swap_iocb for batching instead of
single-bio requests and rebase the swap_ops interface, achieving
faster swap throughput during kernel builds.
- "mm: kmemleak: reduce transient false positives by confirming leaks"
(Catalin Marinas)
Reduce false-positive kmemleak reports by combining two kmemleak
enhancements that add a second confirmation scan and a configurable
minimum unreferenced scan count module parameter.
- "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
(Breno Leitao)
Auto-scanning kernels can generate false-positive memory leak reports
on single scans, so this patch defaults min_unref_scans to 2 when
CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
confirming scan.
- "swap_ops updates" (Christoph Hellwig)
Batching I/O for synchronous swap devices causes performance
regressions and filesystem-based swap suffers from double-indirection
overhead. This series resolves both issues by reintroducing per-folio
writes for synchronous swap and allowing filesystems to directly
export their own swap_ops.
- "mm/khugepaged: several cleanups" (Nico Pache)
khugepaged accumulated redundant state-checking patterns and outdated
comments following mTHP integration. Introduce dedicated helpers for
PTE validation and event counting while refreshing the internal
documentation.
- "maple_tree: lock checking and clean ups" (Liam Howlett)
Syzbot reports incorrectly blame memory management exit paths for
locking bugs, maple tree erase operations risk allocation failures
without gfp flags and internal documentation lacks clarity.
Improve lock error detection, update docs, fix race and allocation
edge cases and optimize erase allocations using a fallback to
GFP_KERNEL | GFP_NOFAIL.
* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
memcg: move LRU size accounting on reparenting instead of copying it
mm/vmscan: fix comment logic in balance_pgdat
maple_tree: add helper mas_make_walkable()
maple_tree: avoid extra gap calculation
maple_tree: fix argument name in header
maple_tree: change two GFP flags in tests
maple_tree: document erase and allocations better
maple_tree: avoid mas_erase() and mtree_erase() failures
maple_tree: document that erase may use GFP_KERNEL for allocations
maple_tree: catch race in mas_alloc_cyclic()
maple_tree: add bulk parent set helper
maple_tree: micro optimisation of mas_wr_store_type()
maple_tree: optimise mas_wr_node_store() when not in rcu mode
maple_tree: use prefetched value in mas_wr_store_type()
maple_tree: clarify comments on mas_nomem()
maple_tree: drop MAPLE_ALLOC_SLOTS
maple_tree: drop dead code from mas_extend_spanning_null()
maple_tree: documentation fix
maple_tree: add write lock checking with lockdep sequence numbers
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Add support for 'slot' based PMU events, paired with new UAPI that
compels the user to select a specific PMU implementation
- Lazy save/restore of vCPU state for pKVM, along with various fixes
and cleanups to the management of vCPU state between the untrusted
host and pKVM hypervisor
- Disable traps of EL1 registers for nested hypervisors when
FEAT_NV2p1 is present, guaranteeing that EL2-specific register bits
are stateful in the EL1 counterpart
- Leverage FEAT_NV3 to avoid unnecessary ERET/TLBI traps when the
scope of those instructions remains 'in host' (i.e. L1
kernel/userspace)
- Pile of fixes for the management of the VNCR pseudo-TLB, such as
under-invalidations and races with concurrent TLBIs on other vCPUs
- Consolidate the non-protected and pKVM view of ICH_VTR_EL2 to a
runtime-patched constant, allowing the same data to be shared with
pKVM prior to dropping host privileges
- Considerable pile of LLM-assisted fixes around the shop but mostly
in the VGIC, our in-kernel generator of bugs (and sometimes
interrupts)
LoongArch:
- Advertise already-supported capabilities
- Some bug fixes about timer and MMIO
- Some hardening about interrupt injection
- Replace kvm_err() with kvm_pr_unimpl()
- Add FPU/LSX/LASX test cases for selftests
RISC-V:
- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager page splitting when enabling dirty logging
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest
s390:
- Fixes for vfio-ap
- Fixes for the gmap rework
- Fixes for vsie
- AI triggered fixes all over
- diag9c tracing
- code move preparation for the additional arm64 support
- enable CONTEXT_ANALYSIS
x86:
- Perform spring cleaning on x86.{c,h} and asm/kvm_host.h, by adding
regs.c (the kvm_cache_regs.h => regs.h is already applied) and
msrs.{c,h}, and moving relevant code out of x86.c
- Split kvm_mmu in three parts, respectively to describe the format
of page tables, walking the guest page tables and building the page
tables. Always use the same page table walker kvm->arch.gva_walk as
the entry point to convert a guest's virtual address, where the
previous code used two different kvm_mmu structs depending on
whether the walk included nested EPT/NPT or not. Make page fault
vmexits reuse the permission checking machinery that is used for
guest page faults. This is both a cleanup and a baby step towards
supporting XS/XU memory permissions
- Document some of the "fun" gotchas with the APIC base when creating
IRQCHIPs on x86
- Remove a defunct masterclock update from kvm_xen_shared_info_init().
It could result in incorrect kvmclock due to triggering an
unnecessary switch to/from masterclock mode
- Skip Xen runstate time updates if time has effectively gone
backwards, so that the guest doesn't report 100% steal time for
a very, very long time
- Drop KVM's runtime updates of the Xen PV timing CPUID leaf, as KVM
was updating the wrong sub-leaf, and upstream KVM will soon provide
all the information needed by userspace to populate the CPUID field
itself
- Fix a bug where KVM would walk a newly created rmap without holding
the rmap lock (or mmu_lock) during aging
- Fix a bug where aging TDP MMU SPTEs could clobber FROZEN SPTEs
- Fix a variety of #DB priority bugs
- Fix a class of races related to enabling Hyper-V emulation on a
vCPU after the vCPU is visible to the rest of KVM
- Use static calls for nested virtualization ops
- Move more KVM-internal code out of x86's kvm_host.h
- Enumerate support for a variety of Zhaoxin instructions that don't
require explicit virtualization
- Fix missing EFER validation bugs, including in the KVM_SET_SREGS*
path
- Harden kvm_vcpu_map() against double-mapping and thus leaking
references
- Misc fixes and cleanups, e.g. for largely benign syzkaller splats
x86 (Intel):
- Zero a vCPU's entry in VMX's Posted Interrupt Descriptor table used
for IPI virtualization when the vCPU is freed, to fix a
use-after-free where hardware will write to a freed vCPU's PID
- Service local TLB flushes on a failed nested VM-Enter to fix a bug
where KVM could miss a TLB on a future, successful VM-Enter with
the same L2 VPID
- Cap the maximum value shoved into the VMX Preemption Timer to
workaround an erratum that affects all existing Intel CPUs that
support CPUID 0x15
- Fix VPID virtualization bugs where KVM would fail to flush hardware
TLBs
- Harden the TDX "populate" ioctls against bad input, and to prepare
for supporting in-place private<=>shared conversion
x86 (AMD):
- Forcefully invalidate SNP VMSA pages if their backing guest_memfd
page is zapped/invalidated, e.g. due to a PUNCH_HOLE in response to
a Page-State Change request
- Remove a dying VM from the GA Log notifier list before the VM is
actually destroyed, to fix a potential use-after-free
- While FOLL_WRITE was needed in the past to trigger CoW unsharing,
nowadays FOLL_LONGTERM does that already even without FOLL_WRITE,
and in fact, get_user_pages() actually disallows FOLL_WRITE
together with FOLL_LONGTERM. So don't pass FOLL_WRITE when
registering encrypted memory regions, i.e. when pinning SEV/SEV-ES
guest memory, to fix a regression with file-backed memory
introduced by KVM's (correct) usage of long-term pins
(This was reviewed by mm maintainers; for more information, see
commit ee1a586dd1fa "KVM: SEV: Drop FOLL_WRITE for encrypted region
registration")
- Allocate full pages for SEV/SEV-ES {DE,EN}CRYPT ops on SNP-enabled
hosts to fix a data corruption issue due to the PSP driver
assigning to-be-written pages to firmware (as required by the SNP
specs)
- Unconditionally intercept ICBEP so that KVM generates the correct
guest RIP when handling an ICEBP-induced TASK_SWITCH #VMEXIT
- Harden the SNP "populate" ioctls against bad input, and to prepare
for supporting in-place private<=>shared conversion
Generic:
- Remove kvm_debugfs_dir if kvm_init() fails after creating KVM's
debugfs
- Add a per-VM bitmap to track which vCPU IDs have been "claimed" but
for which the vCPU isn't yet online, and use the bitmap to reject
duplicate IDs before calling into arch code. This allows arch code
to consume vcpu_id without having to worry about cross-vCPU
clobbering (at least s390 and x86 have had related bugs)
- Rework the so called "prepare" and "invalidate" guest_memfd hooks
to prepare for in-place private<=>shared conversion, and clean up a
few warts along the way
Selftests:
- Automatically allocate a full page for L2 guest stacks on x86
instead of requiring test-specific L1 guest code to carve out a
portion of the L1 stack for L2 usage, and to ensure the L2 stack
also adheres to the x86-64 calling convention ABI
- Add a selftest to verify {Guest,Host}-Only behavior in x86's
mediated PMU
- Clean up nested SVM's handling of GPRs on L2<=>L1 transitions,
reuse the functionality for nested VMX, and drop the ucall hack
that was fudging around the lack of GPR switching on nVMX
- Add a stress test to verify KVM doesn't clobber/drop #PF state,
e.g. CR2, across save/restore, including when L2 is active
- Add a test to verify KVM_CREATE_VM accepts exactly what is reported
by KVM_CAP_VM_TYPES
- Misc selftests fixes and cleanups
- Fix several issues with seeding the pRNG, and rework the pRNG APIs
to that the pRNG can be sanely used in host code, not just guest
code
- Add an IRQ test to validate virtual IRQ deliverty for IRQs wired up
via KVM_IRQFD + KVM_SET_GSI_ROUTING, with optional support for
triggering IRQs via writes to an assigned VFIO device
- Add syscall wrappers to assert success on a variety of pthreads and
CPU affinity APIs
- Set vCPU pthread affinity as early as possible to reduce contention
issues that were surfaced by PREEMPT_LAZY, which result in runtimes
of over a minute on large hosts, versus the expected ~5 seconds
- Rework the PMU counters test to run each testcase using a single VM
with many vCPUs for each sub-testcase, instead of using a unique VM
for each sub-testcase. This cuts the runtime by ~20x
Miscellaneous:
- MAINTAINERS updates for vfio-ap, guest_memfd, kvm-x86. Mostly
representing the status quo more accurately, but also... welcome
David Hildenbrand as guest_memfd reviewer!"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (413 commits)
KVM: arm64: Validate GICv5 timer PPIs before claiming ownership
KVM: arm64: vgic: Reject out-of-range GICv5 PPI IDs
KVM: arm64: vgic: Prevent speculative SPI array underflow
KVM: arm64: vgic: Free gic_kvm_info on initialization failure
KVM: arm64: Avoid mismatched accesses to 'struct kvm_nvhe_init_params'
s390/vfio-ap: Fix NULL deref in status_show() during queue probe
s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove
s390/vfio-ap: Fix required lock not held during update of ap_matrix_mdev object
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
s390/vfio-ap: Fix stale do_remove flag across iterations in vfio_ap_mdev_cfg_remove
RISC-V: KVM: fix vcpu vector context handling for kernel-mode vector
riscv: vector: allow non-preemptible kernel-mode vector with IRQs off
riscv: vector: refactor riscv_v_start_kernel_context
KVM: s390: gmap: Make prefix handling optional
KVM: s390: gmap: Make CMMA optional
KVM: s390: gmap: Make storage keys optional
KVM: s390: Prepare gmap for a second KVM implementation
...
|
|
All remaining callers of is_cow_mapping() are invoking it in the form of
is_cow_mapping(vma->vm_flags) or an indirected version of this.
Therefore, provide a helper - vma_is_cow_mapping() to directly test the
VMA.
Additionally provide a new helper vma_flags_is_cow_mapping() which
performs the check using the new vma_flags_t type, and share this logic
between vma_is_cow_mapping() and vma_desc_is_cow_mapping().
With these changes, no callers of is_cow_mapping() remain, so remove it.
Also update the userland VMA tests to reflect the change.
No functional change intended.
[akpm@linux-foundation.org: fix kerneldoc comment typo, per Lorenzo]
Link: https://lore.kernel.org/aob1goSSPH6sTN9y@gremlin
Link: https://lore.kernel.org/20260813-b4-scalable-cow-virt-pgoff-v5-2-c21581c0c3c8@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Deucher <alexander.deucher@amd.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: Barry Song <baohua@kernel.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christan König <christian.koenig@amd.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price (Meta) <gourry@gourry.net>
Cc: Harry Yoo <harry@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ray <Ray.Huang@amd.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- swiotlb:
- new configuration option for the default pool size
(Jagadeesh Pagadala)
- reduce overhead for high watermark tracking (chenhuguanshen)
- minor code cleanups and improvements (Vova Sharaienko, Honglei Huang
and Marek Szyprowski)
- add proper tracking of the shared DMA state through direct, pool and
swiotlb paths (Aneesh Kumar K.V)
This is important for confidential-computing
* tag 'dma-mapping-7.3-2026-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/swiotlb: decouple high watermark tracking from CONFIG_DEBUG_FS
MAINTAINERS: update tree for DMA MAPPING HELPERS
dma/swiotlb: introduce Kconfig option for compile-time default pool size
dma-direct: Improve readability of the dma_direct_map_sg() for P2PDMA case
iommu/dma: simplify dma_iova_destroy() and drop the free_iova helper
dma-coherent: use KiB in DMA allocation logs
dma-coherent: fix spacing coding style issue
* tag 'dma-mapping-7.3-2026-08-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (23 commits)
swiotlb: remove unused SWIOTLB_FORCE flag
dma: swiotlb: handle set_memory_decrypted() failures
dma: swiotlb: free dynamic pools from process context
dma-direct: rename ret to cpu_addr in alloc helpers
dma-direct: select DMA address encoding from __DMA_ATTR_ALLOC_CC_SHARED
dma-direct: set decrypted flag for remapped DMA allocations
dma-direct: make dma_direct_map_phys() honor DMA_ATTR_CC_SHARED
dma-direct: Move dma_direct_map_phys() to dma/direct.c
dma-direct: pass attrs to dma_capable() for DMA_ATTR_CC_SHARED checks
dma-mapping: make dma_pgprot() honor __DMA_ATTR_ALLOC_CC_SHARED
dma: swiotlb: track pool encryption state and honor DMA_ATTR_CC_SHARED
dma: swiotlb: pass mapping attributes by reference
dma-pool: track decrypted atomic pools and select them via attrs
dma-direct: use __DMA_ATTR_ALLOC_CC_SHARED in alloc/free paths
dma-mapping: Add internal shared allocation attribute
coco: arm64: s390: powerpc: Mark secure guests with CC_ATTR_GUEST_MEM_ENCRYPT
dma-direct: swiotlb: handle swiotlb alloc/free outside __dma_direct_alloc_pages
s390: Expose protected virtualization through cc_platform_has()
swiotlb: Preserve allocation virtual address for dynamic pools
dma: free atomic pool pages by physical address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add a cpuidle driver with polling and enabled wait states using the
existing CPU idle infrastructure and idle governor to improve latency
for frequent sleep/wakeup cycles. Remove the obsolete tick delay
heuristic and generic arch_needs_cpu() hook. Add the corresponding
driver entry to MAINTAINERS
- Add kCFI support using the generic support provided by Clang
- Enable Clang CONTEXT_ANALYSIS for various architecture code and for
char, PCI, CIO and virtio drivers. Add required lock annotations,
exclude unsupported mm helpers and remove conditional PCI locking
- Fix secure storage access exception handling and reintroduce
DCACHE_WORD_ACCESS previously removed as a workaround
- Fix cpum_cf perf crashes when CPUs are brought online while per-task
events are active. Allocate and remove per-CPU counter data from CPU
hotplug callbacks
- Fix a deadlock when an s390dbf debug area is unregistered while one
of its debugfs files is being written to
- Fix MVIY_PERCPU() with binutils older than 2.39, where an assembler
macro silently omitted an instruction needed to repair interrupted
operations after CPU migration
- Remove/replace cond_resched() calls which are no-ops with the
supported s390 preemption models
- Fix AP queue depth and maximum message length decoding according to
the architecture. Current hardware is not affected, but future
hardware could report values which were handled incorrectly
- Reflect the configured CPU state in cpu_enabled_mask so deconfigured
CPUs are not presented as available for onlining
- Restore the vDSO GNU_EH_FRAME program header which was lost when the
build switched to direct linker invocation, and mark it read-only
- Add SCLP action qualifiers used by Spyre for card initialization,
recoverable error and telemetry reporting
- Move KMSAN interrupt flag helpers out of line to fix
-Wstatic-in-inline build warnings
- Use level-specific page table entry accessors for hugetlb entries and
ptep_get() when accessing crashed kernel memory in kdump
- Make forced AP bus rescans killable so that a user process blocked
behind an ongoing scan can still be terminated with SIGKILL
- Rework pkey ioctl error paths to remove duplicated cleanup code and
avoid freeing error pointers
- Allow the protected guest SWIOTLB buffer to be allocated outside the
first 2GB. Also enable dynamic SWIOTLB growth and the coherent atomic
pool fallback to improve I/O behavior when the initial pool is
exhausted
- Add program check statistics and spinlock contention tracepoints.
Increase the lockdep chain capacity to keep lockdep enabled for
complex code paths such as btrfs
- Simplify IPL, trap and syscall code and remove the obsolete
unistd_32.h generation entry
* tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
s390/percpu: Fix MVIY_PERCPU() with older binutils
s390/debug: Fix deadlock during unregister
s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks
s390: Enable CONTEXT_ANALYSIS for various directories
s390/mm: Add __context_unsafe() attribute to gmap helper functions
s390/mm: Add __context_unsafe() attribute to do_secure_storage_access()
s390/sysinfo: Add context analysis attributes
s390/irqflags: Add out-of-line definitions of arch_local_irq_*() for KMSAN
s390/virtio: Enable CONTEXT_ANALYSIS
s390/cio: Enable CONTEXT_ANALYSIS
s390/vfio_ccw: Add __must_hold() attribute to vfio_ccw_sch_quiesce()
s390/pci: Enable CONTEXT_ANALYSIS
s390/pci: Rework __zpci_event_availability() to remove conditional locking
s390/pci: Rework __zpci_event_error() to remove conditional locking
s390/char: Enable CONTEXT_ANALYSIS
s390/con3215: Add __must_hold() attribute to raw3215_make_room()
s390/ap: Fix MAPML computation
s390/cio: Remove cond_resched() calls
s390: Remove cond_resched() calls
KVM: s390: Remove cond_resched() calls
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
|
Pull VFIO updates from Alex Williamson:
- Add nv_falcon vfio selftest driver.
The Falcon is a general-purpose microcontroller embedded within
NVIDIA GPUs, presenting a relatively simple DMA programming
interface.
This adds another selftest target for vfio-pci with real DMA
transfers (Rubin Du, Alex Williamson)
- Add allocation assertion helpers to vfio selftests and use them to
avoid variable length arrays and the compiler errors they generate
(Alex Mastro)
- Fix use-after-free hazard where an init path error in MSI support
leaves a stray pointer that can later be reused or double-freed
(Xiang Mei)
- Fix previous refactor of PCI BAR mappings to honor non_mappable_bars
flag, which otherwise generates a warning when trying to pci_iomap()
a 256TiB BAR on ISM devices on s390 (Farhan Ali)
- Add igb vfio selftest driver.
Like nv_falcon, this provides another target for DMA testing with
vfio selftests, but importantly this driver supports both physical
82576 NICs and the emulation model in QEMU.
This therefore enables a vfio selftest vector with no physical
hardware requirements (Josh Hilke, Alex Williamson)
- Mark selftest fixture objects __maybe_unused to accommodate builds
with clang -Wunused-but-set-global (David Matlack)
- Add error recovery for vfio-pci devices on s390x.
This expands devices which expose the existing error eventfd and
introduces a device feature for reporting firmware defined error
state information to the user, allowing recovery through hypervisor
channels (Farhan Ali)
* tag 'vfio-v7.3-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Remove the pcie check for VFIO_PCI_ERR_IRQ_INDEX
vfio-pci/zdev: Add a device feature for error information
s390/pci: Store PCI error information for passthrough devices
PCI/MSI: Enable memory decoding before restoring MSI-X messages
PCI: Fail FLR when config space is inaccessible
PCI: Avoid saving config space state if inaccessible
PCI: Allow per function PCI slots to fix slot reset on s390
PCI: Introduce PCI_SLOT_PLACEHOLDER constant for slot_nr placeholder value
selftests: harness: Mark test fixture objects __maybe_unused
vfio: selftests: Retry on EAGAIN during device reset
vfio: selftests: igb: Add driver for Intel 82576 device
vfio: selftests: Add helpers to re-enable interrupts
vfio/pci: Avoid mapping BARs for devices with non-mappable BARs
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio: selftests: Avoid VLAs
vfio: selftests: Add allocation assert helpers
vfio: selftests: Add NVIDIA Falcon driver for DMA testing
vfio: selftests: Allow drivers without send_msi() support
vfio: selftests: Add generic PCI command register helpers
vfio: selftests: Add memcpy chunking to vfio_pci_driver_memcpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Fix kernel-doc warnings by adjusting in file documentation
- Consolidate do_proc_* function into do_proc_vec
Consolidate three slightly different implementations of applying a
converter on all elements of a vector. Fixes to this function now
propagate to the three types.
- Replace CONFIG_PROC_SYSCTL with CONFIG_SYSCTL (they were the same)
and restrict cad_pid modifications to global root (GLOBAL_ROOT_UID)
* tag 'sysctl-7.03-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: remove CONFIG_PROC_SYSCTL, it just mirrors CONFIG_SYSCTL
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
sysctl: repair some kernel-doc comments
sysctl: add Returns: kernel-doc for all functions
sysctl: Update API function documentation
sysctl: Rename proc_doulongvec_minmax_conv to proc_doulongvec_conv
sysctl: Group proc_handler declarations and document
sysctl: Replace do_proc_do{int,ulong,uint}vec with do_proc_vec
sysctl: Add negp parameter to douintvec converter functions
sysctl: Move default converter assignment out of do_proc_dointvec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull treewide timer related cleanups from Thomas Gleixner:
- Remove the leftover CLOCK_TICK_RATE which has been scheduled for
removal more than a decade ago along with some now empty asm/timex.h
files.
- Consolidate delay timer calibration
The construct of having a define in a header requires that
architectures provided asm/timex.h for no reason. Also the function
name for reading the delay timer is confusing at best.
Use a config switch to enable that functionality and rename the
function to delay_read_timer() to make the purpose clear.
This removes some more now empty asm/timex.h files as well.
* tag 'timers-cleanups-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
calibrate: Rework delay timer calibration
treewide: Remove CLOCK_TICK_RATE
x86: Use PIT_TICK_RATE instead of CLOCK_TICK_RATE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Make syscall user dispatching configurable
Not all architectures can makes use of syscall user dispatching.
Allow them to disable the feature completely.
- Consolidate stack randomization for the generic entry code and the
architectures using it.
Stack randomization on syscall entry was sprinkled throughout the
architecture specific low level entry code and in some cases at the
wrong points, e.g. before establishing state, which violates the
non-instrumentable constraints of that code.
Clean this up by integrating stack randomization into the generic
entry code helpers so that it is invoked at the earliest possible
point right after establishing state and converting all generic entry
code using architecture over.
- Clean up the syscall number handling in the generic entry code. It
works correctly for architectures which have a separate return value
storage in pt_regs, but fails to distinguish the case where user
space handed in -1 as syscall number from the case where the entry
code rejects it by returning -1 to the callers. Aside of that the
return value functionality of those interfaces is not really
intuitive.
Fix this by separating the decision to reject a syscall (user
dispatch, ptrace, seccomp ...) from the potential modification of the
syscall number through these mechanisms.
This solves most of the problems for architectures which do not have
a separate return value storage in pt_regs except for the case where
a tracepoint has a BPF script or a probe attached which overwrite
both the syscall number and the return value. But that's a problem
which cannot be solved in the generic code, that only can be
addressed by separating the storage model in the affected
architectures.
* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
entry: Make return type of syscall_trace_enter() bool
entry: Rework trace_syscall_enter()
entry: Rework syscall_audit_enter()
syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
entry: Fix seccomp bypass after ptrace with TSYNC
x86/entry: Simplify the syscall number logic
x86/entry: Get rid of the sys_ni_syscall() indirection
x86/entry: Make syscall functions static
ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
seccomp, treewide: Rename and convert __secure_computing() to return boolean
entry: Use syscall number instead of rereading it
entry: Remove syscall_enter_from_user_mode()
x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
s390/syscall: Use enter_from_user_mode_randomize_stack()
riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
randomize_kstack: Provide add_random_kstack_offset_irqsoff()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v7.3
1. Advertise already-supported capabilities.
2. Some bug fixes about timer and MMIO.
3. Some hardening about interrupt injection.
4. Replace kvm_err() with kvm_pr_unimpl().
5. Add FPU/LSX/LASX test cases for selftests.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Fixes for 7.3
- merged kvms390/master to pick up additional fixes that came too late
for 7.2
- Fixes for vfio-ap
- Fixes for the gmap rework
- Fixes for vsie
- AI triggered fixes all over
- diag9c tracing
- code move preparation for the additional arm64 support
- enable CONTEXT_ANALYSIS
- update to vfio maintainer file location
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull failfs filesystem from Christian Brauner:
"Add failfs and expose a FD_FAILFS_ROOT sentinel.
This allows userspace to shed their filesystem state completely. A
process with its root or working directory in failfs must anchor every
path lookup at an explicit file descriptor. Absolute paths, absolute
symlinks and AT_FDCWD-relative lookups simply fail.
Failfs is the counterpart to nullfs. nullfs says adds a permanently
empty, immutable directory whose lookups fail with ENOENT but which
can be opened, read, stat'd and mounted upon. Failfs on the other hand
fails every operation. The root cannot be opened at all. A single
instance is mounted during early boot via kern_mount(), which makes it
logically distinct from every mount namespace.
This is accompanied by a new fchroot() system call which makes
chrooting via a file descriptor a first class concept. It's possible
to chroot into failfs as an unprivileged user provided the task has no
new privileges set"
* tag 'vfs-7.3-rc1.failfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Documentation: add failfs documentation
selftests/filesystems: add failfs selftests
arch: hookup fchroot() system call
fs: support FD_FAILFS_ROOT in fchroot()
fs: add fchroot()
fs: support FD_FAILFS_ROOT in fchdir()
fs: add failfs
|
|
For zPCI devices, we have platform specific error information. The platform
firmware provides this error information to the operating system in an
architecture specific mechanism. To enable recovery from userspace for
these devices, we want to expose this error information to userspace. Add a
new device feature to expose this information.
Userspace needs to be provide a buffer of fixed size. This size is provided
to userspace via the VFIO_DEVICE_INFO_CAP_ZPCI_BASE capability.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Link: https://lore.kernel.org/r/20260630165553.725-3-alifm@linux.ibm.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
For a passthrough device we need co-operation from user space to recover
the device. This would require to bubble up any error information to user
space. Let's store this error information for passthrough devices, so it
can be retrieved later.
We can now have userspace drivers (vfio-pci based) on s390x. The userspace
drivers will not have any KVM fd and so no kzdev associated with them. So
we need to update the logic for detecting passthrough devices to not depend
on struct kvm_zdev.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Link: https://lore.kernel.org/r/20260630165553.725-2-alifm@linux.ibm.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Commit a737737cdb9c ("s390/percpu: Infrastructure for more efficient
this_cpu operations") introduced MVIY_PERCPU(), which stringifies
arguments that are already C string literals. This generates an
assembler macro invocation with whitespace-separated quoted arguments:
GEN_MVIY "459712" "%r3"
GNU as versions prior to binutils 2.39 drop the separating whitespace
between quoted macro arguments during input scrubbing. They
consequently parse the invocation as a single argument and emit
repeated warnings:
Warning: missing closing `"'
The .ifc in GEN_MVIY never matches and GNU as exits successfully
without emitting the mviy instruction. As a result, the interrupted
per-CPU sequence is not marked in lowcore and the exception return
path cannot repair the per-CPU address register after migration.
All MVIY_PERCPU() callers pass C string literals. Use them directly
and separate the assembler macro arguments with an explicit comma. The
resulting invocation is:
GEN_MVIY 459712, %r3
This form is unambiguous for GNU as and LLVM's integrated assembler.
This behavior was fixed in GNU as from binutils 2.39, but Linux
supports binutils 2.30.
Fixes: a737737cdb9c ("s390/percpu: Infrastructure for more efficient this_cpu operations")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Unregistering an s390dbf debug area while one of the associated debugfs
files is being written to can cause a deadlock:
$ echo >.../vmur/level $ rmmod vmur
===================================================
debugfs write
debugfs_file_get()
debug_unregister()
mutex_lock(debug_mutex)
debugfs_remove()
wait for debugfs_file_put()
debug_file_ops.write()
debug_input()
mutex_lock(debug_mutex) ==> DEADLOCK
Fix this by splitting debug_unregister() into an s390dbf and debugfs
part, and running only the s390dbf part with debug_mutex locked.
Fixes: 9372a82892c2 ("s390/debug: fix debug area life cycle")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The command 'perf stat -e cycles -- <command>' crashes the kernel
when CPUs are hotplug added during that run.
Root cause is the allocation of struct cpu_cf_events at first
event initialization. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
create an event for CPUs 0,2-X. Since the events are created with
task-context, the scheduler will eventually schedule the program
on CPU1. This CPU has not created and initialized any per
CPU event infrastructure as that CPU was not online at the time
of the perf invocation. Thus when the scheduler runs stress-ng
on CPU1, the function cpumf_pmu_add() refers to a NULL pointer:
struct cpu_cf_events *cpuhw = this_cpu_cfhw();
This function call is invoked after the task stress-ng has been
made runnable on CPU1. And this_cpu_cfhw() returns NULL.
The result is a panic:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
....
Krnl PSW : 0404d00180000000 000003ef8291fd0c (cpumf_pmu_add+0x3c/0x80)
....
Call Trace:
[<000003ef8291fd0c>] cpumf_pmu_add+0x3c/0x80
[<000003ef82bb5e3e>] event_sched_in+0xae/0x190
[<000003ef82bb60d6>] merge_sched_in+0x1b6/0x390
[<000003ef82bb65b8>] visit_groups_merge.constprop.0.isra.0+0x308/0x5b0
[<000003ef82bb689a>] pmu_groups_sched_in+0x3a/0x50
[<000003ef82bb6a30>] ctx_sched_in+0x180/0x260
[<000003ef82bb780c>] perf_event_context_sched_in+0x11c/0x2d0
[<000003ef82bb79ee>] __perf_event_task_sched_in+0x2e/0xc0
[<000003ef82994834>] finish_task_switch.isra.0+0x1a4/0x250
....
Last Breaking-Event-Address:
[<000003ef8291f1d8>] this_cpu_cfhw+0x38/0x40
The issue arises only in per-task context when the CPUMF facility is
used and the scheduler picks a random CPU for such a process to run on.
The scheduler enables the CPUMF infrastructure via PMU callback
functions pmu::add() and pmu::del().
Introduce a CPU hotplug prepare/dead callback pair which creates and
removes the per CPU counter data while the CPU is offline. Count the
users which track every CPU (cpu == -1), that is perf_event_open()
events with task context and /dev/hwctr device sessions, in the new
counter cpu_cf_root::tskcnt, protected by pmc_reserve_mutex.
This ensures the infrastructure is available when
new CPU is selected to run the per-task context process.
In cpum_cf_free_root() and cpum_cf_free_cpu() ensure the reference
pointer to data structures is set to NULL before the data is freed
to prevent interrupt handlers to access stale data.
[gor@linux.ibm.com: change commit message]
Fixes: 9b9cf3c77e7e ("s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events")
Cc: stable@vger.kernel.org # v6.5+
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Guard guest prefix handling behind `KVM_S390_MANAGES_S390_GUEST`. This
enables other KVM implementations to use gmap without implementing
prefix handling. The prefix handling is integrated deeply in the gmap
implementation. Therefore, provide safe default implementations for the
guarded functions.
No functional changes.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Guard guest CMMA behind `KVM_S390_MANAGES_S390_GUEST`. This enables
other KVM implementations to use gmap without implementing CMMA.
No functional changes.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Guard guest storage key handling behind `KVM_S390_MANAGES_S390_GUEST`.
This enables other KVM implementations to use gmap without implementing
storage key infrastructure. Define KVM_S390_MANAGES_S390_GUEST to 1 for
KVM hosts managing s390 guests (in kvm_host_s390.h). A KVM
implementation not implementing those features must define
KVM_S390_MANAGES_S390_GUEST to 0 in its kvm_host_<guest_arch>.h.
No functional changes besides the new guard.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Refactor gmap code such that a second s390 (host) KVM implementation can
use the gmap code as well. Move mmu code from s390 to gmap so the other
KVM implementation can use it as well.
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Move PGM code definitions from kvm_host_s390.h (back) to the generic
kvm_host.h. These definitions are needed by multiple KVM implementations
and should be in a shared location.
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Move all the code required to run s390 KVM guests on s390 to a s390
subdirectory. Move gmap related code into a gmap directory to later
share gmap code between KVM implementations.
Update S390 VFIO-PCI MAINTAINERS filepath.
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Rename kvm_host.h to kvm_host_s390.h and kvm_host_types.h to
kvm_host_s390_types.h to distinguish s390-specific KVM definitions
from the generic kvm_host.h that will be used for shared definitions.
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Rename kvm-s390.c to s390.c and kvm-s390.h to s390.h for consistency
with the new directory structure. Update all include statements and
simplify Makefile ccflags from explicit paths to -I$(src).
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Update include guard names in dat.h, faultin.h, and gmap.h to
ARCH_KVM_GMAP_* to reflect their upcoming relocation to a shared gmap
directory.
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Move the kvm_s390_major_guest_pfault trace event from trace.h to a new
trace_gmap.h header. This separates gmap-specific tracing from general
KVM/s390 tracing, preparing for code sharing between multiple KVM
implementations.
The trace event definition is updated to use local defines for
parameters so that they can be replaced later with ease for when another
KVM implementation uses these traces.
No functional change.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear.
Fixes: 2f9469484a3b ("s390/bpf: Support arena atomics")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://patch.msgid.link/20260811131600.506721-5-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
|
|
In some circumstances, one bit of kernel stack could have been leaked
from dat_cond_set_storage_key().
Fix by clearing prev before use.
Fixes: 8e03e8316eb2 ("KVM: s390: KVM page table management functions: storage keys")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260812104436.109741-9-imbrenda@linux.ibm.com>
|
|
kvm_s390_clear_pv_state() needs to also clear the dumping flag, to
allow the protected VM to be started again (as non-protected, with all
protected state safely destroyed) after a forced reboot while a
protected dump was ongoing and not completed.
Fixes: e40df9efd68a ("KVM: s390: pv: clear the state without memset")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260812104436.109741-8-imbrenda@linux.ibm.com>
|
|
When __inject_sigp_stop() is called for a Stop and Store Status
operation, if the vCPU is running, the interrupt is marked as pending
and the status is stored by the thread performing the KVM_RUN IOCTL.
If the vCPU is already stopped, the status is stored immediately.
Storing the status means writing into userspace, which might fault, and
__inject_sigp_stop() is called from do_inject_vcpu() which in turn is
always called holding a spinlock, which is obviously an issue.
Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and
adding a bool flag to indicate whether a store status is needed. The
callers of do_inject_vcpu() are modified to pass the pointer to the
bool flag; whenever a Store Status operation is needed, the callers can
now perform it outside the spinlock.
Opportunistically refactor kvm_s390_set_irq_state() to use
scoped_guard() and __free().
Fixes: 6cddd432e3da ("KVM: s390: handle stop irqs without action_bits")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
[ Added Fixes tag while picking -- Claudio ]
Message-ID: <20260812104436.109741-7-imbrenda@linux.ibm.com>
|
