diff options
Diffstat (limited to 'include/scsi')
| -rw-r--r-- | include/scsi/scsi_proto.h | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h index f64385cde5b9..c6b4a4dc8d9c 100644 --- a/include/scsi/scsi_proto.h +++ b/include/scsi/scsi_proto.h @@ -129,6 +129,10 @@ #define SAI_GET_LBA_STATUS 0x12 #define SAI_REPORT_REFERRALS 0x13 #define SAI_GET_STREAM_STATUS 0x16 +#define SAI_GET_PHYSICAL_ELEMENT_STATUS 0x17 +#define SAI_REMOVE_ELEMENT_AND_TRUNCATE 0x18 +#define SAI_RESTORE_ELEMENTS_AND_REBUILD 0x19 +#define SAI_REMOVE_ELEMENT_AND_MODIFY_ZONES 0x1a /* values for maintenance in */ #define MI_REPORT_IDENTIFYING_INFORMATION 0x05 #define MI_REPORT_TARGET_PGS 0x0a @@ -234,6 +238,57 @@ enum sam_status { #define COMPLETED 0x0f /* + * Additional Sense Codes (ASC). + */ +#define NO_ADDITIONAL_SENSE 0x00 +#define OVERLAP_ATOMIC_COMMAND_ASC 0x00 +#define LOGICAL_UNIT_NOT_READY 0x04 +#define LOGICAL_UNIT_COMMUNICATION_FAILURE 0x8 +#define WRITE_ERROR_ASC 0x0c +#define UNRECOVERED_READ_ERR 0x11 +#define PARAMETER_LIST_LENGTH_ERR 0x1a +#define MISCOMPARE_VERIFY_ASC 0x1d +#define INVALID_OPCODE 0x20 +#define LBA_OUT_OF_RANGE 0x21 +#define INVALID_FIELD_IN_CDB 0x24 +#define INVALID_FIELD_IN_PARAM_LIST 0x26 +#define WRITE_PROTECTED 0x27 +#define UA_READY_ASC 0x28 +#define UA_RESET_ASC 0x29 +#define UA_CHANGED_ASC 0x2a +#define TOO_MANY_IN_PARTITION_ASC 0x3b +#define TARGET_CHANGED_ASC 0x3f +#define SAVING_PARAMS_UNSUP 0x39 +#define TRANSPORT_PROBLEM 0x4b +#define INSUFF_RES_ASC 0x55 +#define LOW_POWER_COND_ON 0x5e +#define THRESHOLD_EXCEEDED 0x5d + +/* + * Additional Sense Code Qualifiers (ASCQ). + */ +#define POWER_ON_RESET_ASCQ 0x00 +#define MODE_CHANGED_ASCQ 0x01 /* mode parameters changed */ +#define FILEMARK_DETECTED_ASCQ 0x01 +#define POWER_ON_OCCURRED_ASCQ 0x01 +#define MICROCODE_CHANGED_ASCQ 0x01 /* with TARGET_CHANGED_ASC */ +#define BUS_RESET_ASCQ 0x02 /* scsi bus reset occurred */ +#define EOP_EOM_DETECTED_ASCQ 0x02 +#define INSUFF_RES_ASCQ 0x03 +#define BEGINNING_OF_P_M_DETECTED_ASCQ 0x04 +#define UNALIGNED_WRITE_ASCQ 0x04 +#define EOD_DETECTED_ASCQ 0x05 +#define WRITE_BOUNDARY_ASCQ 0x05 +#define READ_INVDATA_ASCQ 0x06 +#define READ_BOUNDARY_ASCQ 0x07 +#define CAPACITY_CHANGED_ASCQ 0x09 +#define ATTEMPT_ACCESS_GAP 0x09 +#define LUNS_CHANGED_ASCQ 0x0e +#define INSUFF_ZONE_ASCQ 0x0e +#define MICROCODE_CHANGED_WO_RESET_ASCQ 0x16 +#define OVERLAP_ATOMIC_COMMAND_ASCQ 0x23 + +/* * DEVICE TYPES * Please keep them in 0x%02x format for $MODALIAS to work */ @@ -413,6 +468,25 @@ enum zbc_zone_alignment_method { ZBC_CONSTANT_ZONE_START_OFFSET = 0x8, }; +/* SCSI physical element types */ +enum scsi_phys_element_type { + SCSI_PHYS_ELEM_TYPE_ALL_ACCESS_STORAGE = 0x1, + SCSI_PHYS_ELEM_TYPE_FRAC_ACCESS_STORAGE = 0x2, +}; + +/* SCSI physical element health. */ +enum scsi_phys_element_health { + SCSI_PHYS_ELEM_HEALTH_NOT_REPORTED = 0x00, + SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS = 0x01, + SCSI_PHYS_ELEM_HEALTH_AT_SPEC_LIMITS = 0x64, + SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS = 0x65, + SCSI_PHYS_ELEM_HEALTH_DEPOP_REVOKE_ERR = 0xFB, + SCSI_PHYS_ELEM_HEALTH_DEPOP_REVOKE_IN_PROGRESS = 0xFC, + SCSI_PHYS_ELEM_HEALTH_DEPOP_ERR = 0xFD, + SCSI_PHYS_ELEM_HEALTH_DEPOP_IN_PROGRESS = 0xFE, + SCSI_PHYS_ELEM_HEALTH_DEPOP_OK = 0xFF, +}; + /* Version descriptor values for INQUIRY */ enum scsi_version_descriptor { SCSI_VERSION_DESCRIPTOR_FCP4 = 0x0a40, |