| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace bare grep with test_grep in test assertions across the
suite, including sourced test helpers (lib-*.sh, *-tests.sh).
test_grep prints the contents of the file being searched on
failure, making debugging easier than a bare grep which fails
silently.
Only assertion-style greps are converted: grep used as a filter
in pipelines, command substitutions, conditionals, or with
redirected I/O is left as-is with a "# lint-ok" annotation.
Existing '! test_grep' calls are rewritten to 'test_grep !' so
that the diagnostic output is preserved on failure.
test_grep requires the file it reads to exist, so '! grep'
assertions that inspect a file whose presence is conditional need
care. In t5537 the '.git/shallow' file is still present after the
repack (the client remains shallow), so the assertion is
converted like any other. In t1400 the '.git/packed-refs' file
exists only with the files backend, so its check is guarded with a
REFFILES prerequisite; the backend-agnostic 'git show-ref' check
that follows still runs under every backend. In t7450 'git~2' is
the NTFS 8.3 short name of a '..git' file and only exists
when 8.3 short-name generation is enabled, so its check is guarded
with a 'test -f' on the path and uses test_grep inside the guard,
the same shape as t1400 (a plain test_grep would BUG when the
short name is absent).
The conversion was generated using a grep-assertion linter
(greplint.pl, added in the following commit) to identify bare
grep calls at command position. To reproduce, from the t/
directory:
# Step 1: annotate the two data-filter greps (grep produces
# data, not a verdict) so the linter skips them.
sed -i '/grep -vf before commits\.raw/s/$/ # lint-ok: data filter/' \
t5326-multi-pack-bitmaps.sh
sed -i '/grep -E "^\[0-9a-f\].*|| :/s/$/ # lint-ok: data filter/' \
t5702-protocol-v2.sh
# Step 1b: two '! grep' assertions need more than a mechanical
# conversion; handle them by hand before the linter-driven steps
# below so it leaves them alone.
#
# t1400: '.git/packed-refs' is absent under reftable, so guard the
# check with REFFILES (a plain test_grep would BUG on the missing
# file):
#
# git update-ref -d HEAD $B &&
# - ! grep "$m" .git/packed-refs &&
# + if test_have_prereq REFFILES
# + then
# + test_grep ! "$m" .git/packed-refs
# + fi &&
# test_must_fail git show-ref --verify -q $m
#
# t7450: git~2 is an NTFS 8.3 short name that exists only when
# short-name generation is enabled, so guard the check on its
# presence with 'test -f' and note in a comment why the path can
# be absent (a plain test_grep would BUG when it is):
#
# - ! grep gitdir squatting-clone/d/a/git~2
# + if test -f squatting-clone/d/a/git~2
# + then
# + test_grep ! gitdir squatting-clone/d/a/git~2
# + fi
# Step 2: reorder pre-existing '! test_grep' to 'test_grep !'
# (must come before steps 3-4 so greplint does not see them)
sed -i 's/! test_grep/test_grep !/' t0031-lockfile-pid.sh
sed -i 's/! test_grep/test_grep !/' t5300-pack-object.sh
sed -i 's/! test_grep/test_grep !/' t5319-multi-pack-index.sh
# Step 3: convert '! grep' -> 'test_grep !'
perl greplint.pl *.sh 2>&1 | cut -d: -f1,2 |
while IFS=: read f l; do
sed -i "${l}s/! *grep/test_grep !/" "$f"
done
# Step 4: convert remaining 'grep' -> 'test_grep'
perl greplint.pl *.sh 2>&1 | cut -d: -f1,2 |
while IFS=: read f l; do
sed -i "${l}s/grep/test_grep/" "$f"
done
To verify, run: make -C t test-greplint
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark some tests that match "*diff*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we diff a blob against a working tree file like:
git diff HEAD:Makefile Makefile
we always use the working tree filename for both sides of
the diff. In most cases that's fine, as the two would be the
same anyway, as above. And until recently, we used the
"name" for the blob, not the path, which would have the
messy "HEAD:" on the beginning.
But when they don't match, like:
git diff HEAD:old_path new_path
it makes sense to show both names.
This patch uses the blob's path field if it's available, and
otherwise falls back to using the filename (in preference to
the blob's name, which is likely to be garbage like a raw
sha1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's a subtle distinction between "name" and "path" for a
blob that we resolve: the name is what the user told us on
the command line, and the path is what we traversed when
finding the blob within a tree (if we did so).
When we diff blobs directly, we use "name", but "path" is
more likely to be useful to the user (it will find the
correct .gitattributes, and give them a saner diff header).
We still have to fall back to using the name for some cases
(i.e., any blob reference that isn't of the form tree:path).
That's the best we can do in such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "a..b" revision syntax was designed to handle commits,
so it doesn't bother to record any mode we find while
traversing a "tree:path" endpoint. These days "git diff" can
diff blobs using either "a:path..b:path" (with dots) or
"a:path b:path" (without), but the two behave
inconsistently, as the with-dots version fails to notice the
mode.
Let's teach the dot-dot range parser to record modes; it
doesn't cost us anything, and it makes this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-diff command can directly compare two blobs (or a
blob and a file), but we don't test this at all. Let's add
some basic tests that reveal a few problems.
There are basically four interesting inputs:
1. sha1 against sha1 (where diff has no information beyond
the contents)
2. tree:path against tree:path (where it can get
information via get_sha1_with_context)
3. Same as (2), but using the ".." range syntax
4. tree:path against a filename
And beyond generating a sane diff, we care about a few
little bits: which paths they show in the diff header, and
whether they correctly pick up a mode change.
They should all be able to show a mode except for (1),
though note that case (3) is currently broken.
For the headers, we would ideally show the path within the
tree if we have it, making:
git diff a:path b:path
look the same as:
git diff a b -- path
We can't always do that (e.g., in the direct sha1/sha1 diff,
we have no path to show), in which case we should fall back
to the name that resolved to the blob (which is nonsense
from the repository's perspective, but is the best we can
do).
Aside from the fallback case in (1), none of the cases get
this right. Cases (2) and (3) always show the full
tree:path, even though we should be able to know just the
"path" portion.
Case (4) picks up the filename path, but assigns it to
_both_ sides of the diff. So this works for:
git diff tree:path path
but not for:
git diff tree:other_path path
The appropriate tests are marked to expect failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
