| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace bare grep with test_grep in test assertions across the
suite, including sourced test helpers (lib-*.sh, *-tests.sh).
test_grep prints the contents of the file being searched on
failure, making debugging easier than a bare grep which fails
silently.
Only assertion-style greps are converted: grep used as a filter
in pipelines, command substitutions, conditionals, or with
redirected I/O is left as-is with a "# lint-ok" annotation.
Existing '! test_grep' calls are rewritten to 'test_grep !' so
that the diagnostic output is preserved on failure.
test_grep requires the file it reads to exist, so '! grep'
assertions that inspect a file whose presence is conditional need
care. In t5537 the '.git/shallow' file is still present after the
repack (the client remains shallow), so the assertion is
converted like any other. In t1400 the '.git/packed-refs' file
exists only with the files backend, so its check is guarded with a
REFFILES prerequisite; the backend-agnostic 'git show-ref' check
that follows still runs under every backend. In t7450 'git~2' is
the NTFS 8.3 short name of a '..git' file and only exists
when 8.3 short-name generation is enabled, so its check is guarded
with a 'test -f' on the path and uses test_grep inside the guard,
the same shape as t1400 (a plain test_grep would BUG when the
short name is absent).
The conversion was generated using a grep-assertion linter
(greplint.pl, added in the following commit) to identify bare
grep calls at command position. To reproduce, from the t/
directory:
# Step 1: annotate the two data-filter greps (grep produces
# data, not a verdict) so the linter skips them.
sed -i '/grep -vf before commits\.raw/s/$/ # lint-ok: data filter/' \
t5326-multi-pack-bitmaps.sh
sed -i '/grep -E "^\[0-9a-f\].*|| :/s/$/ # lint-ok: data filter/' \
t5702-protocol-v2.sh
# Step 1b: two '! grep' assertions need more than a mechanical
# conversion; handle them by hand before the linter-driven steps
# below so it leaves them alone.
#
# t1400: '.git/packed-refs' is absent under reftable, so guard the
# check with REFFILES (a plain test_grep would BUG on the missing
# file):
#
# git update-ref -d HEAD $B &&
# - ! grep "$m" .git/packed-refs &&
# + if test_have_prereq REFFILES
# + then
# + test_grep ! "$m" .git/packed-refs
# + fi &&
# test_must_fail git show-ref --verify -q $m
#
# t7450: git~2 is an NTFS 8.3 short name that exists only when
# short-name generation is enabled, so guard the check on its
# presence with 'test -f' and note in a comment why the path can
# be absent (a plain test_grep would BUG when it is):
#
# - ! grep gitdir squatting-clone/d/a/git~2
# + if test -f squatting-clone/d/a/git~2
# + then
# + test_grep ! gitdir squatting-clone/d/a/git~2
# + fi
# Step 2: reorder pre-existing '! test_grep' to 'test_grep !'
# (must come before steps 3-4 so greplint does not see them)
sed -i 's/! test_grep/test_grep !/' t0031-lockfile-pid.sh
sed -i 's/! test_grep/test_grep !/' t5300-pack-object.sh
sed -i 's/! test_grep/test_grep !/' t5319-multi-pack-index.sh
# Step 3: convert '! grep' -> 'test_grep !'
perl greplint.pl *.sh 2>&1 | cut -d: -f1,2 |
while IFS=: read f l; do
sed -i "${l}s/! *grep/test_grep !/" "$f"
done
# Step 4: convert remaining 'grep' -> 'test_grep'
perl greplint.pl *.sh 2>&1 | cut -d: -f1,2 |
while IFS=: read f l; do
sed -i "${l}s/grep/test_grep/" "$f"
done
To verify, run: make -C t test-greplint
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of cases where our tests end up announcing that a
certain prerequisite is or isn't fulfilled. While this is supposed to
help the developer it has the downside that it breaks the TAP format.
We could convert these cases to just have a "#" prefix, but it feels
rather unlikely that these are generally useful in the first place. We
already do announce why a specific test is being skipped, so we should
try to use this mechanism to the best extent possible.
Stop announcing these prereqs to fix the TAP format. Where possible,
convert the tests to rely on the prerequisites themselves to announce
why a test ran or didn't ran.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sergey Organov noticed and reported "--patch --no-patch --raw"
behaves differently from just "--raw". It turns out that there are
a few interesting bugs in the implementation and documentation.
* First, the documentation for "--no-patch" was unclear that it
could be read to mean "--no-patch" countermands an earlier
"--patch" but not other things. The intention of "--no-patch"
ever since it was introduced at d09cd15d (diff: allow --no-patch
as synonym for -s, 2013-07-16) was to serve as a synonym for
"-s", so "--raw --patch --no-patch" should have produced no
output, but it can be (mis)read to allow showing only "--raw"
output.
* Then the interaction between "-s" and other format options were
poorly implemented. Modern versions of Git uses one bit each to
represent formatting options like "--patch", "--stat" in a single
output_format word, but for historical reasons, "-s" also is
represented as another bit in the same word. This allows two
interesting bugs to happen, and we have both X-<.
(1) After setting a format bit, then setting NO_OUTPUT with "-s",
the code to process another "--<format>" option drops the
NO_OUTPUT bit to allow output to be shown again. However,
the code to handle "-s" only set NO_OUTPUT without unsetting
format bits set earlier, so the earlier format bit got
revealed upon seeing the second "--<format>" option. This is
the problem Sergey observed.
(2) After setting NO_OUTPUT with "-s", code to process
"--<format>" option can forget to unset NO_OUTPUT, leaving
the command still silent.
It is tempting to change the meaning of "--no-patch" to mean
"disable only the patch format output" and reimplement "-s" as "not
showing anything", but it would be an end-user visible change in
behavior. Let's fix the interactions of these bits to first make
"-s" work as intended.
The fix is conceptually very simple.
* Whenever we set DIFF_FORMAT_FOO because we saw the "--foo"
option (e.g. DIFF_FORMAT_RAW is set when the "--raw" option is
given), we make sure we drop DIFF_FORMAT_NO_OUTPUT. We forgot to
do so in some of the options and caused (2) above.
* When processing "-s" option, we should not just set
DIFF_FORMAT_NO_OUTPUT bit, but clear other DIFF_FORMAT_* bits.
We didn't do so and retained format bits set by options
previously seen, causing (1) above.
It is even more tempting to lose NO_OUTPUT bit and instead take
output_format word being 0 as its replacement, but that would break
the mechanism "git show" uses to default to "--patch" output, where
the distinction between telling the command to be silent with "-s"
and having no output format specified on the command line matters,
and an explicit output format given on the command line should not
be "combined" with the default "--patch" format.
So, while we cannot lose the NO_OUTPUT bit, as a follow-up work, we
may want to replace it with OPTION_GIVEN bit, and
* make "--patch", "--raw", etc. set DIFF_FORMAT_$format bit and
DIFF_FORMAT_OPTION_GIVEN bit on for each format. "--no-raw",
etc. will set off DIFF_FORMAT_$format bit but still record the
fact that we saw an option from the command line by setting
DIFF_FORMAT_OPTION_GIVEN bit.
* make "-s" (and its synonym "--no-patch") clear all other bits
and set only the DIFF_FORMAT_OPTION_GIVEN bit on.
which I suspect would make the code much cleaner without breaking
any end-user expectations.
Once that is in place, transitioning "--no-patch" to mean the
counterpart of "--patch", just like "--no-raw" only defeats an
earlier "--raw", would be quite simple at the code level. The
social cost of migrating the end-user expectations might be too
great for it to be worth, but at least the "GIVEN" bit clean-up
alone may be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark some tests that match "*diff*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the "diff-lib" to "lib-diff". With this rename and preceding
commits there is no remaining t/*lib* which doesn't follow the
convention of being called t/lib-*.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use $ZERO_OID instead of hard-coding a fixed size all-zeros object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All options that trigger a patch output now override --no-patch.
The case of --binary deserves extra attention: the name may suggest that
it turns a normal patch into a binary patch, but it actually already
enables patch output when normally disabled (e.g. "git log --binary"
displays a patch), hence it makes sense for "git show --no-patch
--binary" to display the binary patch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This follows the usual convention of having a --no-foo option to negate
--foo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds more cruft to diff --git header to record the blob SHA1 and
the mode the patch/diff is intended to be applied against, to help the
receiving end fall back on a three-way merge. The new header looks
like this:
diff --git a/apply.c b/apply.c
index 7be5041..8366082 100644
--- a/apply.c
+++ b/apply.c
@@ -14,6 +14,7 @@
// files that are being modified, but doesn't apply the patch
// --stat does just a diffstat, and doesn't actually apply
+// --show-index-info shows the old and new index info for...
...
Upon receiving such a patch, if the patch did not apply cleanly to the
target tree, the recipient can try to find the matching old objects in
her object database and create a temporary tree, apply the patch to
that temporary tree, and attempt a 3-way merge between the patched
temporary tree and the target tree using the original temporary tree
as the common ancestor.
The patch lifts the code to compute the hash for an on-filesystem
object from update-index.c and makes it available to the diff output
routine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add '-R' flag to diff-tree, and change the test subdirectory
shell files to be executable (something that Junio couldn't
get me to do through the pure patch with my current patch
handling infrastructure).
|
|
This test would have caught the strbuf eof condition gotcha,
hopefully fixed with my previous patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This implements the output format suggested by Linus in
<Pine.LNX.4.58.0505161556260.18337@ppc970.osdl.org>, except the
imaginary diff option is spelled "diff --git" with double dashes as
suggested by Matthias Urlichs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This test comes from "[PATCH 2/2] The core GIT tests: recent additions and
fixes" but couldn't be included before since it depended on the modechange
diff output changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
|
