| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The unused name parameter in 'struct chdir_notify_entry' has been
removed from chdir_notify_register(), chdir_notify_unregister(), and
related callback signatures across several subsystems, simplifying the
API now that trace output no longer uses it.
* ch/chdir-notify-drop-name:
chdir-notify.h: Removed unused param 'name'
|
|
The `name` parameter in `chdir_notify_entry` was only ever used by
chdir_notify_reparent() to produce trace output. That function was
removed in 5bf546755c (chdir-notify: drop unused
`chdir_notify_reparent()`, 2026-06-25), which left `name` with no
remaining consumers.
Prior to that removal, most callers had already stopped passing a
meaningful name, switching to NULL in 1f43ff2c7e (refs: unregister
reference stores from "chdir_notify", 2026-06-25) and 0de2467e6c
(odb/source-packed: start converting to a proper `struct odb_source`,
2026-06-17).
Since no caller has populated `name` with real data for some time,
and its last consumer is gone, drop it from chdir_notify_register(),
chdir_notify_unregister(), and the callback signature to simplify
the API.
Signed-off-by: Colin Hinton <colinlewishinton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tempfile and lockfile APIs have been refactored to stop depending
on the 'the_repository' global variable, and their callers have been
updated to use the repository-aware variants.
* rs/tempfile-wo-the-repository:
use repo_hold_lock_file_for_update{,_mode,_timeout}() with custom repos
tempfile: stop using the_repository
lockfile: add repo_hold_lock_file_for_update{,_timeout}{,_mode}()
refs/packed: use repo_create_tempfile()
tempfile: add repo_create_tempfile{,_mode}()
|
|
When locking the "packed-refs" file we allow the user to configure a
timeout for how long we try taking the lock. This is configurable via
"core.packedRefsTimeout", which we parse in `packed_refs_lock()`.
The parsed value is stored in function-static variables though, which of
course has the effect that we'll only ever use the timeout configured in
the first packed reference store that we see. Consequently, if we ever
were to handle stores from different repositories, then we'd use the
same configuration for both stores even if they diverge.
This is of course a somewhat theoretical concern -- we don't typically
handle multiple packed stores, and even if we did it's very unlikely
that the user has configured different timeout values for each of them.
But still, this is a code smell, and an unnecessary one, too.
Fix the issue by moving the value into `struct packed_ref_store` so that
it can be parsed per store.
This removes the last callsite that still used `the_repository`, so drop
the `USE_THE_REPOSITORY_VARIABLE` define.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the config setting core.sharedRepository from the repository at
hand instead of from the_repository.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the config setting core.sharedRepository from the ref store base
repository at hand instead of from the_repository.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating reference stores we register them with the "chdir_notify"
subsystem. This is required because some of the paths we track may be
relative paths, so we have to reparent them in case the current working
directory changes.
But while we register the reference stores, we never unregister them.
This can have multiple outcomes:
- For a repository's main reference database we essentially keep the
pointer alive. We never free that database, either, and our leak
checker doesn't notice because it's still registered.
- For submodule and worktree reference databases we do eventually free
them in `repo_clear()`, so we may keep pointers to free'd memory
registered. We never notice though as we don't tend to chdir around
in the middle of the process.
We never noticed either of these symptoms, but they are obviously bad.
Partially fix those issues by unregistering the reference stores when
releasing them. The leak of the main reference database will be fixed in
a subsequent commit.
Note that this requires us to use `chdir_notify_register()` instead of
`chdir_notify_reparent()`, as there is no infrastructure to unregister the
latter.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reference backends peel tag objects when storing references to them.
This is to provide optimized reads which avoids hitting the odb. The
previous commits ensures that the peeled value is now propagated via the
generic layer. So modify the packed and reftable backend to directly use
this value instead of calling `peel_object()` independently.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reference backends are initiated via the `init()` function. When
initiating the function, the backend is also provided flags which denote
the access levels of the initiator. Create a new structure
`ref_store_init_options` to house such options and move the access flags
to this structure.
This allows easier extension of providing further options to the
backends. In the following commit, we'll also provide config around
reflog creation to the backends via the same structure.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code refactoring around refs-for-each-* API functions.
* ps/refs-for-each:
refs: replace `refs_for_each_fullref_in()`
refs: replace `refs_for_each_namespaced_ref()`
refs: replace `refs_for_each_glob_ref()`
refs: replace `refs_for_each_glob_ref_in()`
refs: replace `refs_for_each_rawref_in()`
refs: replace `refs_for_each_rawref()`
refs: replace `refs_for_each_ref_in()`
refs: improve verification for-each-ref options
refs: generalize `refs_for_each_fullref_in_prefixes()`
refs: generalize `refs_for_each_namespaced_ref()`
refs: speed up `refs_for_each_glob_ref_in()`
refs: introduce `refs_for_each_ref_ext`
refs: rename `each_ref_fn`
refs: rename `do_for_each_ref_flags`
refs: move `do_for_each_ref_flags` further up
refs: move `refs_head_ref_namespaced()`
refs: remove unused `refs_for_each_include_root_ref()`
|
|
Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
|
|
An upcoming commit will add support for providing an URI via the
'extensions.refStorage' config. The URI will contain the reference
backend and a corresponding payload. The payload can be then used for
providing an alternate locations for the reference backend.
To prepare for this, modify the existing backends to accept such an
argument when initializing via the 'init()' function. Both the files
and reftable backends will parse the information to be filesystem paths
to store references. Given that no callers pass any payload yet this is
essentially a no-op change for now.
To enable this, provide a 'refs_compute_filesystem_location()' function
which will parse the current 'gitdir' and the 'payload' to provide the
final reference directory and common reference directory (if working in
a linked worktree).
The documentation and tests will be added alongside the extension of the
config variable.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The enum `do_for_each_ref_flags` and its individual values don't match
to our current best practices when it comes to naming things. Rename it
to `refs_for_each_flag`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `refs_verify_refnames_available()` we have two nested loops: the
outer loop iterates over all references to check, while the inner loop
checks for filesystem conflicts for a given ref by breaking down its
path.
With batched updates, when we detect a filesystem conflict, we mark the
update as rejected and execute 'continue'. However, this only skips to
the next iteration of the inner loop, not the outer loop as intended.
This causes the same reference to be repeatedly rejected. Fix this by
using a goto statement to skip to the next reference in the outer loop.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git maintenance" command learned "is-needed" subcommand to tell if
it is necessary to perform various maintenance tasks.
* kn/maintenance-is-needed:
maintenance: add 'is-needed' subcommand
maintenance: add checking logic in `pack_refs_condition()`
refs: add a `optimize_required` field to `struct ref_storage_be`
reftable/stack: add function to check if optimization is required
reftable/stack: return stack segments directly
|
|
Another fix-up to "peeled-tags" topic.
* ps/ref-peeled-tags-fixes:
object: fix performance regression when peeling tags
|
|
To allow users of the refs namespace to check if the reference backend
requires optimization, add a new field `optimize_required` field to
`struct ref_storage_be`. This field is of type `optimize_required_fn`
which is also introduced in this commit.
Modify the debug, files, packed and reftable backend to implement this
field. A following commit will expose this via 'git pack-refs' and 'git
refs optimize'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our Bencher dashboards [1] have recently alerted us about a bunch of
performance regressions when writing references, specifically with the
reftable backend. There is a 3x regression when writing many refs with
preexisting refs in the reftable format, and a 10x regression when
migrating refs between backends in either of the formats.
Bisecting the issue lands us at 6ec4c0b45b (refs: don't store peeled
object IDs for invalid tags, 2025-10-23). The gist of the commit is that
we may end up storing peeled objects in both reftables and packed-refs
for corrupted tags, where the claimed tagged object type is different
than the actual tagged object type. This will then cause us to create
the `struct object *` with a wrong type, as well, and obviously nothing
good comes out of that.
The fix for this issue was to introduce a new flag to `peel_object()`
that causes us to verify the tagged object's type before writing it into
the refdb -- if the tag is corrupt, we skip writing the peeled value.
To verify whether the peeled value is correct we have to look up the
object type via the ODB and compare the actual type with the claimed
type, and that additional object lookup is costly.
This also explains why we see the regression only when writing refs with
the reftable backend, but we see the regression with both backends when
migrating refs:
- The reftable backend knows to store peeled values in the new table
immediately, so it has to try and peel each ref it's about to write
to the transaction. So the performance regression is visible for all
writes.
- The files backend only stores peeled values when writing the
packed-refs file, so it wouldn't hit the performance regression for
normal writes. But on ref migrations we know to write all new values
into the packed-refs file immediately, and that's why we see the
regression for both backends there.
Taking a step back though reveals an oddity in the new verification
logic: we not only verify the _tagged_ object's type, but we also verify
the type of the tag itself. But this isn't really needed, as we wouldn't
hit the bug in such a case anyway, as we only hit the issue with corrupt
tags claiming an invalid type for the tagged object.
The consequence of this is that we now started to look up the target
object of every single reference we're about to write, regardless of
whether it even is a tag or not. And that is of course quite costly.
Fix the issue by only verifying the type of the tagged objects. This
means that we of course still have a performance hit for actual tags.
But this only happens for writes anyway, and I'd claim it's preferable
to not store corrupted data in the refdb than to be fast here. Rename
the flag accordingly to clarify that we only verify the tagged object's
type.
This fix brings performance back to previous levels:
Benchmark 1: baseline
Time (mean ± σ): 46.0 ms ± 0.4 ms [User: 40.0 ms, System: 5.7 ms]
Range (min … max): 45.0 ms … 47.1 ms 54 runs
Benchmark 2: regression
Time (mean ± σ): 140.2 ms ± 1.3 ms [User: 77.5 ms, System: 60.5 ms]
Range (min … max): 138.0 ms … 142.7 ms 20 runs
Benchmark 3: fix
Time (mean ± σ): 46.2 ms ± 0.4 ms [User: 40.2 ms, System: 5.7 ms]
Range (min … max): 45.0 ms … 47.3 ms 55 runs
Summary
update-ref: baseline
1.00 ± 0.01 times faster than fix
3.05 ± 0.04 times faster than regression
[1]: https://bencher.dev/perf/git/plots
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit removed all references to 'pack_refs()' within
the refs subsystem. Continue this cleanup by also renaming
'pack_refs_opts' to 'refs_optimize_opts' and the respective flags
accordingly. Keeping the naming consistent will make the code easier to
maintain.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `struct ref_store` variable exposes two ways to optimize a reftable
backend:
1. pack_refs
2. optimize
The former was specific to the 'files' + 'packed' refs backend. The
latter is more generic and covers all backends. While the naming is
different, both of these functions perform the same functionality.
Consolidate this code to only maintain the 'optimize' functions. Do this
by modifying the backends so that they exclusively implement the
`optimize` callback, only. All users of the refs subsystem already use
the 'optimize' function so there is no changes needed on the callee
side. Finally, cleanup all references to the 'pack_refs' field of the
structure and code around it.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the "files" and "reftable" backend store peeled object IDs for
references that point to tags:
- The "files" backend stores the value when packing refs, where each
peeled object ID is prefixed with "^".
- The "reftable" backend stores the value whenever writing a new
reference that points to a tag via a special ref record type.
Both of these backends use `peel_object()` to find the peeled object ID.
But as explained in the preceding commit, that function does not detect
the case where the tag's tagged object and its claimed type mismatch.
The consequence of storing these bogus peeled object IDs is that we're
less likely to detect such corruption in other parts of Git.
git-for-each-ref(1) for example does not notice anymore that the tag is
broken when using "--format=%(*objectname)" to dereference tags.
One could claim that this is good, because it still allows us to mostly
use the tag as intended. But the biggest problem here is that we now
have different behaviour for such a broken tag depending on whether or
not we have its peeled value in the refdb.
Fix the issue by verifying the object type when peeling the object. If
that verification fails we simply skip storing the peeled value in
either of the reference formats.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When peeling a tag to a non-tag object we repeatedly call
`parse_object()` on the tagged object until we find the first object
that isn't a tag. While this feels sensible at first, there is a big
catch here: `parse_object()` doesn't actually verify the type of the
tagged object.
The relevant code path here eventually ends up in `parse_tag_buffer()`.
Here, we parse the various fields of the tag, including the "type". Once
we've figured out the type and the tagged object ID, we call one of the
`lookup_${type}()` functions for whatever type we have found. There is
two possible outcomes in the successful case:
1. The object is already part of our cached objects. In that case we
double-check whether the type we're trying to look up matches the
type that was cached.
2. The object is _not_ part of our cached objects. In that case, we
simply create a new object with the expected type, but we don't
parse that object.
In the first case we might notice type mismatches, but only in the case
where our cache has the object with the correct type. In the second
case, we'll blindly assume that the type is correct and then go with it.
We'll only notice that the type might be wrong when we try to parse the
object at a later point.
Now arguably, we could change `parse_tag_buffer()` to verify the tagged
object's type for us. But that would have the effect that such a tag
cannot be parsed at all anymore, and we have a small bunch of tests for
exactly this case that assert we still can open such tags. So this
change does not feel like something we can retroactively tighten, even
though one shouldn't ever hit such corrupted tags.
Instead, add a new `flags` field to `peel_object()` that allows the
caller to opt in to strict object verification. This will be wired up at
a subset of callsites over the next few commits.
Note that this change also inlines `deref_tag_noverify()`. There's only
been two callsites of that function, the one we're changing and one in
our test helpers. The latter callsite can trivially use `deref_tag()`
instead, so by inlining the function we avoid having to pass down the
flag.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the peeled object ID gets propagated via the `struct reference`
there is no need anymore to call into the reference iterator itself to
dereference an object. Remove this infrastructure.
Most of the changes are straight-forward deletions of code. There is one
exception though in `refs/packed-backend.c::write_with_updates()`. Here
we stop peeling the iterator and instead just pass the peeled object ID
of that iterator directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the "files" and "reftable" backend are able to store peeled values
for tags in the respective formats. This allows for a more efficient
lookup of the target object of such a tag without having to manually
peel via the object database.
The infrastructure to access these peeled object IDs is somewhat funky
though. When iterating through objects, we store a pointer reference to
the current iterator in a global variable. The callbacks invoked by that
iterator are then expected to call `peel_iterated_oid()`, which checks
whether the globally-stored iterator's current reference refers to the
one handed into that function. If so, we ask the iterator to peel the
object, otherwise we manually peel the object via the object database.
Depending on global state like this is somewhat weird and also quite
fragile.
Introduce a new `struct reference::peeled_oid` field that can be
populated by the reference backends. This field can be accessed via a
new function `reference_get_peeled_oid()` that either uses that value,
if set, or alternatively peels via the ODB. With this change we don't
have to rely on global state anymore, but make the peeled object ID
available to the callback functions directly.
Adjust trivial callers that already have a `struct reference` available.
Remaining callers will be adjusted in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the introduction of the `struct ref_iterator::ref` field it now is
a whole lot easier to introduce new fields that become accessible to the
caller without having to adapt every single callsite. But there's a
downside: when a new field is introduced we always have to adapt all
backends to set that field.
This isn't something we can avoid in the general case: when the new
field is expected to be populated by all backends we of course cannot
avoid doing so. But new fields may be entirely optional, in which case
we'd still have such churn. And furthermore, it is very easy right now
to leak state from a previous iteration into the next iteration.
Address this issue by ensuring that the reference backends all fully
reset the field on every single iteration. This ensures that no state
from previous iterations can leak into the next one. And it ensures that
any newly introduced fields will be zeroed out by default.
Note that we don't have to explicitly adapt the "files" backend, as it
uses the `cache_ref_iterator` internally. Furthermore, other "wrapping"
iterators like for example the `prefix_ref_iterator` copy around the
whole reference, so these don't need to be adapted either.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The base iterator has a couple of fields that tracks the name, target,
object ID and flags for the current reference. Due to this design we
have to create a new `struct reference` whenever we want to hand over
that reference to the callback function, which is tedious and not very
efficient.
Convert the structure to instead contain a `struct reference` as member.
This member is expected to be populated by the implementations of the
iterator and is handed over to the callback directly.
While at it, simplify `should_pack_ref()` to take a `struct reference`
directly instead of passing its respective fields.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config API had a set of convenience wrapper functions that
implicitly use the_repository instance; they have been removed and
inlined at the calling sites.
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_int()`. All
callsites are adjusted so that they use
`repo_config_get_int(the_repository, ...)` instead. While some callsites
might already have a repository available, this mechanical conversion is
the exact same as the current situation and thus cannot cause any
regression. Those sites should eventually be cleaned up in a later patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref iterator exposes a `ref_iterator_seek()` function. The name
suggests that this would seek the iterator to a specific reference in
some ways similar to how `fseek()` works for the filesystem.
However, the function actually sets the prefix for refs iteration. So
further iteration would only yield references which match the particular
prefix. This is a bit confusing.
Let's add a 'flags' field to the function, which when set with the
'REF_ITERATOR_SEEK_SET_PREFIX' flag, will set the prefix for the
iteration in-line with the existing behavior. Otherwise, the reference
backends will simply seek to the specified reference and clears any
previously set prefix. This allows users to start iteration from a
specific reference.
In the packed and reftable backend, since references are available in a
sorted list, the changes are simply setting the prefix if needed. The
changes on the files-backend are a little more involved, since the files
backend uses the 'ref-cache' mechanism. We move out the existing logic
within `cache_ref_iterator_seek()` to `cache_ref_iterator_set_prefix()`
which is called when the 'REF_ITERATOR_SEEK_SET_PREFIX' flag is set. We
then parse the provided seek string and set the required levels and
their indexes to ensure that seeking is possible.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During fsck, we use "strbuf_read" to read the content of "packed-refs"
without using mmap mechanism. This is a bad practice which would consume
more memory than using mmap mechanism. Besides, as all code paths in
"packed-backend.c" use this way, we should make "fsck" align with the
current codebase.
As we have introduced the helper function "allocate_snapshot_buffer", we
can simply use this function to use mmap mechanism.
Suggested-by: Jeff King <peff@peff.net>
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"load_contents" would choose which way to load the content of the
"packed-refs". However, we cannot directly use this function when
checking the consistency due to we don't want to open the file. And we
also need to reuse the logic to avoid causing repetition.
Let's create a new helper function "allocate_snapshot_buffer" to extract
the snapshot allocation logic in "load_contents" and update the
"load_contents" to align with the behavior.
Suggested-by: Jeff King <peff@peff.net>
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We assume the "packed-refs" won't be empty and instead has at least one
line in it (even when there are no refs packed, there is the file header
line). Because there is no terminating LF in the empty file, we will
report "packedRefEntryNotTerminated(ERROR)" to the user.
However, the runtime code paths would accept an empty "packed-refs"
file, for example, "create_snapshot" would simply return the "snapshot"
without checking the content of "packed-refs". So, we should skip
checking the content of "packed-refs" when it is empty during fsck.
After 694b7a1999 (repack_without_ref(): write peeled refs in the
rewritten file, 2013-04-22), we would always write a header into the
"packed-refs" file. So, versions of Git that are not too ancient never
write such an empty "packed-refs" file.
As an empty file often indicates a sign of a filesystem-level issue, the
way we want to resolve this inconsistency is not make everybody totally
silent but notice and report the anomaly.
Let's create a "FSCK_INFO" message id "EMPTY_PACKED_REFS_FILE" to report
to the users that "packed-refs" is empty.
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Incorrect sorting of refs with bytes with high-bit set on platforms
with signed char led to a BUG, which has been corrected.
* ps/refname-avail-check-optim:
refs/packed: fix BUG when seeking refs with UTF-8 characters
|
|
Updating multiple references have only been possible in all-or-none
fashion with transactions, but it can be more efficient to batch
multiple updates even when some of them are allowed to fail in a
best-effort manner. A new "best effort batches of updates" mode
has been introduced.
* kn/non-transactional-batch-updates:
update-ref: add --batch-updates flag for stdin mode
refs: support rejection in batch updates during F/D checks
refs: implement batch reference update support
refs: introduce enum-based transaction error types
refs/reftable: extract code from the transaction preparation
refs/files: remove duplicate duplicates check
refs: move duplicate refname update check to generic layer
refs/files: remove redundant check in split_symref_update()
|
|
It was reported that using git-pull(1) in a repository whose remote
contains branches with emojis leads to the following bug:
$ git pull
remote: Enumerating objects: 161255, done.
remote: Counting objects: 100% (55884/55884), done.
remote: Compressing objects: 100% (5518/5518), done.
remote: Total 161255 (delta 54253), reused 50509 (delta 50364),
pack-reused 105371 (from 4)
Receiving objects: 100% (161255/161255), 309.90 MiB | 16.87 MiB/s, done.
Resolving deltas: 100% (118048/118048), completed with 13416 local objects.
From github.com:github/github
97ab7ae3f3745..8fb2f9fa180ed master -> origin/master
[...snip many screenfuls of updates to origin remotes...]
BUG: refs/packed-backend.c:984: packed-refs backend yielded reference
preceding its prefix
error: fetch died of signal 6
This issue bisects to 22600c04529 (refs/iterator: implement seeking for
packed-ref iterators, 2025-03-12) where we have implemented seeking for
the packed-ref iterator. As part of that change we introduced a check
that verifies that the iterator only returns refnames bigger than the
prefix. In theory, this check should always hold: when a prefix is set
we know that we would've seeked that prefix first, so we should never
see a reference sorting before that prefix.
But in practice the check itself is misbehaving when handling unicode
characters. The particular issue triggered with a branch that got the
"shaved ice" unicode character in its name, which is composed of the
bytes "0xEE 0x90 0xBF". The bug triggers when we compare the refname
"refs/heads/<shaved-ice>" to something like "refs/heads/z", and it
specifically hits when comparing the first byte, "0xEE".
The root cause is that the most-significant bit of 0xEE is set. The
`refname` and `prefix` pointers that we use to compare bytes with one
another are both pointers to signed characters. As such, when we
dereference the 0xEE byte the result is a _negative_ value, and this
value will of course compare smaller than "z".
We can see that this issue is avoided in `cmp_packed_refname()`, where
we explicitly cast each byte to its unsigned form. Fix the bug by doing
the same in `packed_ref_iterator_advance()`.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git supports making reference updates with or without transactions.
Updates with transactions are generally better optimized. But
transactions are all or nothing. This means, if a user wants to batch
updates to take advantage of the optimizations without the hard
requirement that all updates must succeed, there is no way currently to
do so. Particularly with the reftable backend where batching multiple
reference updates is more efficient than performing them sequentially.
Introduce batched update support with a new flag,
'REF_TRANSACTION_ALLOW_FAILURE'. Batched updates while different from
transactions, use the transaction infrastructure under the hood. When
enabled, this flag allows individual reference updates that would
typically cause the entire transaction to fail due to non-system-related
errors to be marked as rejected while permitting other updates to
proceed. System errors referred by 'REF_TRANSACTION_ERROR_GENERIC'
continue to result in the entire transaction failing. This approach
enhances flexibility while preserving transactional integrity where
necessary.
The implementation introduces several key components:
- Add 'rejection_err' field to struct `ref_update` to track failed
updates with failure reason.
- Add a new struct `ref_transaction_rejections` and a field within
`ref_transaction` to this struct to allow quick iteration over
rejected updates.
- Modify reference backends (files, packed, reftable) to handle
partial transactions by using `ref_transaction_set_rejected()`
instead of failing the entire transaction when
`REF_TRANSACTION_ALLOW_FAILURE` is set.
- Add `ref_transaction_for_each_rejected_update()` to let callers
examine which updates were rejected and why.
This foundational change enables batched update support throughout the
reference subsystem. A following commit will expose this capability to
users by adding a `--batch-updates` flag to 'git-update-ref(1)',
providing both a user-facing feature and a testable implementation.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace preprocessor-defined transaction errors with a strongly-typed
enum `ref_transaction_error`. This change:
- Improves type safety and function signature clarity.
- Makes error handling more explicit and discoverable.
- Maintains existing error cases, while adding new error cases for
common scenarios.
This refactoring paves the way for more comprehensive error handling
which we will utilize in the upcoming commits to add batch reference
update support.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the tracking of refnames in `affected_refnames` from individual
backends into the generic layer in 'refs.c'. This centralizes the
duplicate refname detection that was previously handled separately by
each backend.
Make some changes to accommodate this move:
- Add a `string_list` field `refnames` to `ref_transaction` to contain
all the references in a transaction. This field is updated whenever
a new update is added via `ref_transaction_add_update`, so manual
additions in reference backends are dropped.
- Modify the backends to use this field internally as needed. The
backends need to check if an update for refname already exists when
splitting symrefs or adding an update for 'HEAD'.
- In the reftable backend, within `reftable_be_transaction_prepare()`,
move the `string_list_has_string()` check above
`ref_transaction_add_update()`. Since `ref_transaction_add_update()`
automatically adds the refname to `transaction->refnames`,
performing the check after will always return true, so we perform
the check before adding the update.
This helps reduce duplication of functionality between the backends and
makes it easier to make changes in a more centralized manner.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code paths to check whether a refname X is available (by seeing
if another ref X/Y exists, etc.) have been optimized.
* ps/refname-avail-check-optim:
refs: reuse iterators when determining refname availability
refs/iterator: implement seeking for files iterators
refs/iterator: implement seeking for packed-ref iterators
refs/iterator: implement seeking for ref-cache iterators
refs/iterator: implement seeking for reftable iterators
refs/iterator: implement seeking for merged iterators
refs/iterator: provide infrastructure to re-seek iterators
refs/iterator: separate lifecycle from iteration
refs: stop re-verifying common prefixes for availability
refs/files: batch refname availability checks for initial transactions
refs/files: batch refname availability checks for normal transactions
refs/reftable: batch refname availability checks
refs: introduce function to batch refname availability checks
builtin/update-ref: skip ambiguity checks when parsing object IDs
object-name: allow skipping ambiguity checks in `get_oid()` family
object-name: introduce `repo_get_oid_with_flags()`
|
|
Implement seeking of `packed-ref` iterators. The implementation is again
straight forward, except that we cannot continue to use the prefix
iterator as we would otherwise not be able to reseek the iterator
anymore in case one first asks for an empty and then for a non-empty
prefix. Instead, we open-code the logic to in `advance()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref and reflog iterators have their lifecycle attached to iteration:
once the iterator reaches its end, it is automatically released and the
caller doesn't have to care about that anymore. When the iterator should
be released before it has been exhausted, callers must explicitly abort
the iterator via `ref_iterator_abort()`.
This lifecycle is somewhat unusual in the Git codebase and creates two
problems:
- Callsites need to be very careful about when exactly they call
`ref_iterator_abort()`, as calling the function is only valid when
the iterator itself still is. This leads to somewhat awkward calling
patterns in some situations.
- It is impossible to reuse iterators and re-seek them to a different
prefix. This feature isn't supported by any iterator implementation
except for the reftable iterators anyway, but if it was implemented
it would allow us to optimize cases where we need to search for
specific references repeatedly by reusing internal state.
Detangle the lifecycle from iteration so that we don't deallocate the
iterator anymore once it is exhausted. Instead, callers are now expected
to always call a newly introduce `ref_iterator_free()` function that
deallocates the iterator and its internal state.
Note that the `dir_iterator` is somewhat special because it does not
implement the `ref_iterator` interface, but is only used to implement
other iterators. Consequently, we have to provide `dir_iterator_free()`
instead of `dir_iterator_release()` as the allocated structure itself is
managed by the `dir_iterator` interfaces, as well, and not freed by
`ref_iterator_free()` like in all the other cases.
While at it, drop the return value of `ref_iterator_abort()`, which
wasn't really required by any of the iterator implementations anyway.
Furthermore, stop calling `base_ref_iterator_free()` in any of the
backends, but instead call it in `ref_iterator_free()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is a "sorted" trait in the header of the "packed-refs" file,
it means that each entry is sorted increasingly by comparing the
refname. We should add checks to verify whether the "packed-refs" is
sorted in this case.
Update the "packed_fsck_ref_header" to know whether there is a "sorted"
trail in the header. It may seem that we could record all refnames
during the parsing process and then compare later. However, this is not
a good design due to the following reasons:
1. Because we need to store the state across the whole checking
lifetime, we would consume a lot of memory if there are many entries
in the "packed-refs" file.
2. We cannot reuse the existing compare function "cmp_packed_ref_records"
which cause repetition.
Because "cmp_packed_ref_records" needs an extra parameter "struct
snaphost", extract the common part into a new function
"cmp_packed_ref_records" to reuse this function to compare.
Then, create a new function "packed_fsck_ref_sorted" to parse the file
again and user the new fsck message "packedRefUnsorted(ERROR)" to report
to the user if the file is not sorted.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"packed-backend.c::next_record" will parse the ref entry to check the
consistency. This function has already checked the following things:
1. Parse the main line of the ref entry to inspect whether the oid is
not correct. Then, check whether the next character is oid. Then
check the refname.
2. If the next line starts with '^', it would continue to parse the
peeled oid and check whether the last character is '\n'.
As we decide to implement the ref consistency check for "packed-refs",
let's port these two checks and update the test to exercise the code.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"packed-backend.c::next_record" will use "check_refname_format" to check
the consistency of the refname. If it is not OK, the program will die.
However, it is reported in [1], we cannot catch some corruption. But we
already have the code path and we must miss out something.
We use the following code to get the refname:
strbuf_add(&iter->refname_buf, p, eol - p);
iter->base.refname = iter->refname_buf.buf
In the above code, `p` is the start pointer of the refname and `eol` is
the next newline pointer. We calculate the length of the refname by
subtracting the two pointers. Then we add the memory range between `p`
and `eol` to get the refname.
However, if there are some NUL characters in the memory range between `p`
and `eol`, we will see the refname as a valid ref name as long as the
memory range between `p` and first occurred NUL character is valid.
In order to catch above corruption, create a new function
"refname_contains_nul" by searching the first NUL character. If it is
not at the end of the string, there must be some NUL characters in the
refname.
Use this function in "next_record" function to die the program if
"refname_contains_nul" returns true.
[1] https://lore.kernel.org/git/6cfee0e4-3285-4f18-91ff-d097da9de737@rd10.de/
Reported-by: R. Diez <rdiez-temp3@rd10.de>
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "packed-backend.c::create_snapshot", if there is a header (the line
which starts with '#'), we will check whether the line starts with "#
pack-refs with: ". However, we need to consider other situations and
discuss whether we need to add checks.
1. If the header does not exist, we should not report an error to the
user. This is because in older Git version, we never write header in
the "packed-refs" file. Also, we do allow no header in "packed-refs"
in runtime.
2. If the header content does not start with "# packed-ref with: ", we
should report an error just like what "create_snapshot" does. So,
create a new fsck message "badPackedRefHeader(ERROR)" for this.
3. If the header content is not the same as the constant string
"PACKED_REFS_HEADER". This is expected because we make it extensible
intentionally and runtime "create_snapshot" won't complain about
unknown traits. In order to align with the runtime behavior. There is
no need to report.
As we have analyzed, we only need to check the case 2 in the above. In
order to do this, use "open_nofollow" function to get the file
descriptor and then read the "packed-refs" file via "strbuf_read". Like
what "create_snapshot" and other functions do, we could split the line
by finding the next newline in the buffer. When we cannot find a
newline, we could report an error.
So, create a function "packed_fsck_ref_next_line" to find the next
newline and if there is no such newline, use
"packedRefEntryNotTerminated(ERROR)" to report an error to the user.
Then, parse the first line to apply the checks. Update the test to
exercise the code.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We always write a space after "# pack-refs with:" but we don't align
with this rule in the "create_snapshot" method where we would check
whether header starts with "# pack-refs with:". It might seem that we
should undoubtedly tighten this rule, however, we don't have any
technical documentation about this and there is a possibility that we
would break the compatibility for other third-party libraries.
By investigating influential third-party libraries, we could conclude
how these libraries handle the header of "packed-refs" file:
1. libgit2 is fine and always writes the space. It also expects the
whitespace to exist.
2. JGit does not expect th header to have a trailing space, but expects
the "peeled" capability to have a leading space, which is mostly
equivalent because that capability is typically the first one we
write. It always writes the space.
3. gitoxide expects the space t exist and writes it.
4. go-git doesn't create the header by default.
As many third-party libraries expect a single space after "# pack-refs
with:", if we forget to write the space after the colon,
"create_snapshot" won't catch this. And we would break other
re-implementations. So, we'd better tighten the rule by checking whether
the header starts with "# pack-refs with: ".
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although "git-fsck(1)" and "packed-backend.c" will check some
consistency and correctness of "packed-refs" file, they never check the
filetype of the "packed-refs". Let's verify that the "packed-refs" has
the expected filetype, confirming it is created by "git pack-refs"
command.
We could use "open_nofollow" wrapper to open the raw "packed-refs" file.
If the returned "fd" value is less than 0, we could check whether the
"errno" is "ELOOP" to report an error to the user. And then we use
"fstat" to check whether the "packed-refs" file is a regular file.
Reuse "FSCK_MSG_BAD_REF_FILETYPE" fsck message id to report the error to
the user if "packed-refs" is not a regular file.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck" learned to issue warnings on "curiously formatted" ref
contents that have always been taken valid but something Git
wouldn't have written itself (e.g., missing terminating end-of-line
after the full object name).
* sj/ref-contents-check:
ref: add symlink ref content check for files backend
ref: check whether the target of the symref is a ref
ref: add basic symref content check for files backend
ref: add more strict checks for regular refs
ref: port git-fsck(1) regular refs check for files backend
ref: support multiple worktrees check for refs
ref: initialize ref name outside of check functions
ref: check the full refname instead of basename
ref: initialize "fsck_ref_report" with zero
|
|
We have already set up the infrastructure to check the consistency for
refs, but we do not support multiple worktrees. However, "git-fsck(1)"
will check the refs of worktrees. As we decide to get feature parity
with "git-fsck(1)", we need to set up support for multiple worktrees.
Because each worktree has its own specific refs, instead of just showing
the users "refs/worktree/foo", we need to display the full name such as
"worktrees/<id>/refs/worktree/foo". So we should know the id of the
worktree to get the full name. Add a new parameter "struct worktree *"
for "refs-internal.h::fsck_fn". Then change the related functions to
follow this new interface.
The "packed-refs" only exists in the main worktree, so we should only
check "packed-refs" in the main worktree. Use "is_main_worktree" method
to skip checking "packed-refs" in "packed_fsck" function.
Then, enhance the "files-backend.c::files_fsck_refs_dir" function to add
"worktree/<id>/" prefix when we are not in the main worktree.
Last, add a new test to check the refname when there are multiple
worktrees to exercise the code.
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
