| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The build system has been updated to support building universal macOS
binaries when 'Rust' is enabled, by compiling separate static archives
for each target triple listed in 'RUST_TARGETS' and combining them
using the macOS 'lipo' tool. The 'git-credential-osxkeychain' helper
has been updated to link against '$(RUST_LIB)' when 'Rust' is enabled.
* sn/osxkeychain-rust-universal:
contrib: wire up osxkeychain in contrib/Makefile on macOS
Makefile: support universal macOS builds via RUST_TARGETS
Makefile: add $(RUST_LIB) prerequisite to osxkeychain
|
|
When `git credential approve` hands the wincred helper a password
together with an `oauth_refresh_token`, the OAuth branch of
`store_credential()` writes one WCHAR past the allocation while
formatting both fields into a single `CredentialBlob`. On Windows
this trips heap verification and tears the helper down with status
`0xC0000374`; `approve` masks the failure, so the credential the
user meant to save never reaches `CredWriteW()` and the next
session prompts for it again.
The bug has the same shape as the one fixed in the previous commit:
the allocation leaves no room for the terminating NUL, and the
`sizeOfBuffer` argument to `_snwprintf_s()` is a byte count where
the API expects a WCHAR count, which lets the safe-CRT runtime
write the terminator out of bounds.
Apply the same remedy d22a488482 (wincred: avoid memory corruption,
2025-11-17) applied in `get_credential()`: allocate `(wlen + 1) *
sizeof(WCHAR)` bytes and pass `wlen + 1` as the destination
capacity in WCHARs.
This closes the second of the two heap writes tracked under
GHSA-rxqw-wxqg-g7hw.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier d22a488482 (wincred: avoid memory corruption, 2025-11-17)
repaired only get_credential(); match_cred_password() has the same
defect and is reached on `git credential reject`. When Git asks the
helper to erase a stored credential whose password was supplied by
the caller, the helper copies the candidate's password into a freshly
allocated buffer for comparison. That copy overruns the allocation
by one WCHAR of NUL, which on uninstrumented Windows manifests as
process termination with status 0xC0000374. Because the helper can
die before reaching CredDeleteW(), `git credential reject` masks the
failure and the rejected credential remains stored.
CredentialBlobSize is documented as a byte count, so for an N-WCHAR
blob it equals N * sizeof(WCHAR). The pre-fix code allocated that
many bytes and asked wcsncpy_s to copy N wide characters, but
wcsncpy_s always appends a terminating NUL WCHAR, writing one WCHAR
past the allocation. The destination-capacity argument was also
passed in bytes rather than in WCHAR elements as the API requires,
so the safe-CRT runtime never rejected the copy.
See GHSA-rxqw-wxqg-g7hw.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "make test" with TEST_CONTRIB_TOO=yes (which is default in
macOS CI workflows), $(MAKE) -C contrib/ test is invoked. However,
contrib/Makefile only invoked tests for diff-highlight and subtree,
meaning git-credential-osxkeychain was never built or verified during
standard CI test runs.
Add a "test" target to contrib/credential/osxkeychain/Makefile that
depends on building git-credential-osxkeychain. Additionally, wire up
credential/osxkeychain in contrib/Makefile under "all", "test", and
"clean" whenever running on macOS (Darwin).
This ensures that running "make test" or "make all" in contrib on macOS
automatically builds and links git-credential-osxkeychain, preventing
future build or symbol linking regressions from slipping through CI.
Signed-off-by: Shardul Natu <snatu@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fix for git-credential-osxkeychain in 4580bcd235 (osxkeychain: avoid
incorrectly skipping store operation, 2025-11-14) introduced linkage
with libgit.a, and its Makefile was adjusted accordingly. However, the
build fails as of 864f55e190 because several macOS-specific refinements
were applied to the top-level Makefile and config.mak.uname, such as:
- 363837afe7 (macOS: make Homebrew use configurable, 2025-12-24)
- cee341e9dd (macOS: use iconv from Homebrew if needed and present,
2025-12-24)
- d281241518 (utf8.c: enable workaround for iconv under macOS 14/15,
2026-01-12)
Since libgit.a and its corresponding header files depend on many flags
defined in the top-level Makefile, these flags must be consistently
defined when building git-credential-osxkeychain. Continuing to manually
adjust the git-credential-osxkeychain Makefile is cumbersome and
fragile.
Define the build targets for git-credential-osxkeychain in the top-level
Makefile and modify its local Makefile to simply rely on those targets.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reported-by: D. Ben Knoble <ben.knoble@gmail.com>
Helped-by: Kristoffer Haugsbakk <kristofferhaugsbakk@fastmail.com>
Signed-off-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Under-allocation fix.
* js/wincred-get-credential-alloc-fix:
wincred: avoid memory corruption
|
|
`wcsncpy_s()` wants to write the terminating null character so we need
to allocate one more space for it in the target memory block.
This should fix crashes when trying to read passwords. When this
happened, the password/token wouldn't print out and Git would therefore
ask for a new password every time.
Signed-off-by: David Macek <david.macek.0@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-credential-osxkeychain skips storing a credential if its "get"
action sets "state[]=osxkeychain:seen=1". This behavior was introduced
in e1ab45b2 (osxkeychain: state to skip unnecessary store operations,
2024-05-15), which appeared in v2.46.
However, this state[] persists even if a credential returned by
"git-credential-osxkeychain get" is invalid and a subsequent helper's
"get" operation returns a valid credential. Another subsequent helper
(such as [1]) may expect git-credential-osxkeychain to store the valid
credential, but the "store" operation is incorrectly skipped because it
only checks "state[]=osxkeychain:seen=1".
To solve this issue, "state[]=osxkeychain:seen" needs to contain enough
information to identify whether the current "store" input matches the
output from the previous "get" operation (and not a credential from
another helper).
Set "state[]=osxkeychain:seen" to a value encoding the credential output
by "get", and compare it with a value encoding the credential input by
"store".
[1]: https://github.com/hickford/git-credential-oauth
Reported-by: Petter Sælen <petter@saelen.eu>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* Replace $(LOADLIBES) because it is deprecated since long and it is
used nowhere else in the git project.
* Use $(gitexecdir) instead of $(libexecdir) because config.mak defines
$(libexecdir) as $(prefix)/libexec, not as $(prefix)/libexec/git-core.
* Similar to other Makefiles, let install target rule create
$(gitexecdir) to make sure the directory exists before copying the
executable and also let it respect $(DESTDIR).
* Shuffle the lines for the default settings to align them with the
other Makefiles in contrib/credential.
* Define .PHONY for all special targets (all, install, clean).
Signed-off-by: Thomas Uhle <thomas.uhle@mailbox.tu-dresden.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an install target rule to the Makefiles in contrib/credential in the
same manner as in other Makefiles in contrib such as for contacts or
subtree.
Signed-off-by: Thomas Uhle <thomas.uhle@mailbox.tu-dresden.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update these Makefiles to be in line with other Makefiles from contrib
such as for contacts or subtree by making the following changes:
* Make the default settings after including config.mak.autogen and
config.mak.
* Add the missing $(CPPFLAGS) to the compiler command as well as the
missing $(CFLAGS) to the linker command.
* Use a pattern rule for compilation instead of a dedicated rule for
each compile unit.
* Get rid of $(MAIN), $(SRCS) and $(OBJS) and simply use their values
such as git-credential-libsecret and git-credential-libsecret.o.
* Strip @ from $(RM) to let the clean target rule be verbose.
* Define .PHONY for all special targets (all, clean).
Signed-off-by: Thomas Uhle <thomas.uhle@mailbox.tu-dresden.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"netrc" credential helper has been improved to understand textual
service names (like smtp) in addition to the numeric port numbers
(like 25).
* mc/netrc-service-names:
contrib: better support symbolic port names in git-credential-netrc
contrib: warn for invalid netrc file ports in git-credential-netrc
contrib: use a more portable shebang for git-credential-netrc
|
|
|
|
To improve support for symbolic port names in netrc files, this
changes does the following:
- Treat symbolic port names as ports, not protocols in git-credential-netrc
- Validate the SMTP server port provided to send-email
- Convert the above symbolic port names to their numerical values.
Before this change, it was not possible to have a SMTP server port set
to "smtps" in a netrc file (e.g. Emacs' ~/.authinfo.gpg), as it would
be registered as a protocol and break the match for a "smtp" protocol
host, as queried for by git-send-email.
Signed-off-by: Maxim Cournoyer <maxim@guixotic.coop>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Invalid ports were previously silently dropped; now a warning message
is produced.
Signed-off-by: Maxim Cournoyer <maxim@guixotic.coop>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the installed scripts have their Perl shebang set to PERL_PATH,
it is nevertheless useful to be able to run the uninstalled script for
manual tests while developing. This change makes the shebang more
portable by having the perl command looked from PATH instead of from a
fixed location.
Signed-off-by: Maxim Cournoyer <maxim@guixotic.coop>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* maint-2.48:
Git 2.48.2
Git 2.47.3
Git 2.46.4
Git 2.45.4
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Meson has the ability to create a kwargs dictionary that can then be
passed to any function call with the `kwargs:` positional argument. This
allows one to deduplicate common parameters that one wishes to pass to
several different function invocations.
Our tests already have one common parameter that we use everywhere,
"timeout", and we're about to add a second common parameter in the next
commit. Let's prepare for this by introducing `test_kwargs` so that we
can deduplicate these common arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.45:
Git 2.45.4
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
* maint-2.44:
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
* maint-2.43:
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The wincred credential helper uses a static buffer ("target") as a
unique key for storing and comparing against internal storage. It does
this by building up a string is supposed to look like:
git:$PROTOCOL://$USERNAME@$HOST/@PATH
However, the static "target" buffer is declared as a wide string with no
more than 1,024 wide characters. The first call to wcsncat() is almost
correct (it copies no more than ARRAY_SIZE(target) wchar_t's), but does
not account for the trailing NUL, introducing an off-by-one error.
But subsequent calls to wcsncat() have an additional problem on top of
the off-by-one. They do not account for the length of the existing
wide string being built up in 'target'. So the following:
$ perl -e '
my $x = "x" x 1_000;
print "protocol=$x\nhost=$x\nusername=$x\npath=$x\n"
' |
C\:/Program\ Files/Git/mingw64/libexec/git-core/git-credential-wincred.exe get
will result in a segmentation fault from over-filling buffer.
This bug is as old as the wincred helper itself, dating back to
a6253da0f3 (contrib: add win32 credential-helper, 2012-07-27). Commit
8b2d219a3d (wincred: improve compatibility with windows versions,
2013-01-10) replaced the use of strncat() with wcsncat(), but retained
the buggy behavior.
Fix this by using a "target_append()" helper which accounts for both the
length of the existing string within the buffer, as well as the trailing
NUL character.
Reported-by: David Leadbeater <dgl@dgl.cx>
Helped-by: David Leadbeater <dgl@dgl.cx>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Both the "netrc" credential helper and git-subtree(1) from "contrib/"
carry a couple of tests with them. These tests get wired up in Meson
unconditionally even in the case where `-Dtests=false`. As those tests
depend on the `test_enviroment` variable, which only gets defined in
case `-Dtests=true`, the result is an error:
```
$ meson setup -Dtests=false -Dcontrib=subtree build
[...]
contrib/subtree/meson.build:15:27: ERROR: Unknown variable "test_environment".
```
Fix the issue by not defining these tests at all in case the "tests"
option is set to `false`.
Reported-by: Sam James <sam@gentoo.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update meson-based build procedure to cover contrib/ and other
places as well.
* ps/meson-contrib-bits:
ci: exercise credential helpers
ci: fix propagating UTF-8 test locale in musl-based Meson job
meson: wire up static analysis via Coccinelle
meson: wire up git-contacts(1)
meson: wire up credential helpers
contrib/credential: fix compilation of "osxkeychain" helper
contrib/credential: fix compiling "libsecret" helper
contrib/credential: fix compilation of wincred helper with MSVC
contrib/credential: fix "netrc" tests with out-of-tree builds
GIT-BUILD-OPTIONS: propagate project's source directory
|
|
We've got a couple of credential helpers in "contrib/credential", all
of which aren't yet wired up via Meson. Do so.
Note that ideally, we'd also wire up t0303 to be executed with each of
the credential helpers to verify their functionality. Unfortunately
though, none of them pass the test suite right now, so this is left for
a future change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "osxkeychain" helper does not compile due to a warning generated by
the unused `argc` parameter. Fix the warning by checking for the minimum
number of required arguments explicitly in the least restrictive way
possible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "libsecret" credential helper does not compile when developer
warnings are enabled due to three warnings:
- contrib/credential/libsecret/git-credential-libsecret.c:78:1:
missing initializer for field ‘reserved’ of ‘SecretSchema’
[-Werror=missing-field-initializers]. This issue is fixed by using
designated initializers.
- contrib/credential/libsecret/git-credential-libsecret.c:171:43:
comparison of integer expressions of different signedness: ‘int’
and ‘guint’ {aka ‘unsigned int’} [-Werror=sign-compare]. This
issue is fixed by using an unsigned variable to iterate through
the string vector.
- contrib/credential/libsecret/git-credential-libsecret.c:420:14:
unused parameter ‘argc’ [-Werror=unused-parameter]. This issue is
fixed by checking the number of arguments, but in the least
restrictive way possible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-credential-wincred helper does not compile on Windows with
Microsoft Visual Studio because of our use of `__attribute__()`, which
its compiler doesn't support. While the rest of our codebase would know
to handle this because we redefine the macro in "compat/msvc.h", this
stub isn't available here because we don't include "git-compat-util.h"
in the first place.
Fix the issue by making the attribute depend on the `_MSC_VER`
preprocessor macro.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests of the "netrc" credential helper aren't prepared to handle
out-of-tree builds:
- They expect the "test.pl" script to be located relative to the build
directory, even though it is located in the source directory.
- They expect the built "git-credential-netrc" helper to be located
relative to the "test.pl" file, evne though it is loated in the
build directory.
This works alright as long as source and build directories are the same,
but starts to break apart with Meson.
Fix these first issue by using the new "GIT_SOURCE_DIR" variable to
locate the test script itself. And fix the second issue by introducing a
new environment variable "CREDENTIAL_NETRC_PATH" that can be set for
out-of-tree builds to locate the built credential helper.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Explicitly set the default goal at the very top of various makefiles.
This is already present in some makefiles, but not all of them.
In particular, this corrects a regression introduced in a38edab7c8
(Makefile: generate doc versions via GIT-VERSION-GEN, 2024-12-06). That
commit added some config files as build targets for the Documentation
directory, and put the target configuration in a sensible place.
Unfortunately, that sensible place was above any other build target
definitions, meaning the default goal changed to being those
configuration files only, rather than the HTML and man page
documentation.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The credential helper to talk to OSX keychain sometimes sent
garbage bytes after the username, which has been corrected.
* jk/osxkeychain-username-is-nul-terminated:
credential/osxkeychain: respect NUL terminator in username
|
|
The credential helper to talk to OSX keychain sometimes sent
garbage bytes after the username, which has been corrected.
* jk/osxkeychain-username-is-nul-terminated:
credential/osxkeychain: respect NUL terminator in username
|
|
This patch fixes a case where git-credential-osxkeychain might output
uninitialized bytes to stdout.
We need to get the username string from a system API using
CFStringGetCString(). To do that, we get the max size for the string
from CFStringGetMaximumSizeForEncoding(), allocate a buffer based on
that, and then read into it. But then we print the entire buffer to
stdout, including the trailing NUL and any extra bytes which were not
needed. Instead, we should stop at the NUL.
This code comes from 9abe31f5f1 (osxkeychain: replace deprecated
SecKeychain API, 2024-02-17). The bug was probably overlooked back then
because this code is only used as a fallback when we can't get the
string via CFStringGetCStringPtr(). According to Apple's documentation:
Whether or not this function returns a valid pointer or NULL depends
on many factors, all of which depend on how the string was created and
its properties.
So it's not clear how we could make a test for this, and we'll have to
rely on manually testing on a system that triggered the bug in the first
place.
Reported-by: Hong Jiang <ilford@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Hong Jiang <ilford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git passes a credential that has been used successfully to the helpers
to record. If a credential is already stored,
"git-credential-osxkeychain store" just records the credential returned
by "git-credential-osxkeychain get", and unnecessary (sometimes
problematic) SecItemAdd() and/or SecItemUpdate() are performed.
We can skip such unnecessary operations by marking a credential returned
by "git-credential-osxkeychain get". This marking can be done by
utilizing the "state[]" feature:
- The "get" command sets the field "state[]=osxkeychain:seen=1".
- The "store" command skips its actual operation if the field
"state[]=osxkeychain:seen=1" exists.
Introduce a new state "state[]=osxkeychain:seen=1".
Suggested-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git passes a credential that has been used successfully to the helpers
to record. If "git-credential-osxkeychain store" commands run in
parallel (with fetch.parallel configuration and/or by running multiple
git commands simultaneously), some of them may exit with the error
"failed to store: -25299". This is because SecItemUpdate() in
add_internet_password() may return errSecDuplicateItem (-25299) in this
situation. Apple's documentation [1] also states as below:
In macOS, some of the functions of this API block while waiting for
input from the user (for example, when the user is asked to unlock a
keychain or give permission to change trust settings). In general, it
is safe to use this API in threads other than your main thread, but
avoid calling the functions from multiple operations, work queues, or
threads concurrently. Instead, serialize function calls or confine
them to a single thread.
The error has not been noticed before, because the former implementation
ignored the error.
Introduce an exclusive lock to serialize execution of operations.
[1] https://developer.apple.com/documentation/security/certificate_key_and_trust_services/working_with_concurrency
Signed-off-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d208bfdfef (credential: new attribute password_expiry_utc, 2023-02-18)
and a5c76569e7 (credential: new attribute oauth_refresh_token,
2023-04-21) introduced new credential attributes but support was missing
from git-credential-osxkeychain.
Support these attributes by appending the data to the password in the
keychain, separated by line breaks. Line breaks cannot appear in a git
credential password so it is an appropriate separator.
Fixes the remaining test failures with osxkeychain:
18 - helper (osxkeychain) gets password_expiry_utc
19 - helper (osxkeychain) overwrites when password_expiry_utc
changes
21 - helper (osxkeychain) gets oauth_refresh_token
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Other credential helpers support deleting credentials that match a
specified password. See 7144dee3ec (credential/libsecret: erase matching
creds only, 2023-07-26) and cb626f8e5c (credential/wincred: erase
matching creds only, 2023-07-26).
Support this in osxkeychain too by extracting, decrypting and comparing
the stored password before deleting.
Fixes the following test failure with osxkeychain:
11 - helper (osxkeychain) does not erase a password distinct from
input
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Other credential managers erased all matching credentials, as indicated
by a test case that osxkeychain failed:
15 - helper (osxkeychain) erases all matching credentials
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The SecKeychain API was deprecated in macOS 10.10, nearly 10 years ago.
The replacement SecItem API however is available as far back as macOS
10.6.
While supporting older macOS was perhaps prevously a concern,
git-credential-osxkeychain already requires a minimum of macOS 10.7
since 5747c8072b (contrib/credential: avoid fixed-size buffer in
osxkeychain, 2023-05-01) so using the newer API should not regress the
range of macOS versions supported.
Adapting to use the newer SecItem API also happens to fix two test
failures in osxkeychain:
8 - helper (osxkeychain) overwrites on store
9 - helper (osxkeychain) can forget host
The new API is compatible with credentials saved with the older API.
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Credential helper based on libsecret (in contrib/) has been updated
to handle an empty password correctly.
* mh/libsecret-empty-password-fix:
libsecret: retrieve empty password
|
|
Since 0ce02e2f (credential/libsecret: store new attributes, 2023-06-16)
a test that stores empty username and password fails when
t0303-credential-external.sh is run with
GIT_TEST_CREDENTIAL_HELPER=libsecret.
Retrieve empty password carefully. This fixes test:
ok 14 - helper (libsecret) can store empty username
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The wincred credential backend has been taught to support oauth refresh
token the same way as credential-cache and credential-libsecret backends.
* mh/credential-oauth-refresh-token-with-wincred:
credential/wincred: store oauth_refresh_token
|
|
a5c7656 (credential: new attribute oauth_refresh_token) introduced
a new confidential credential attribute and added support to
credential-cache. Later 0ce02e2f (credential/libsecret: store new
attributes, 2023-06-16) added support in credential-libsecret.
To add support in credential-wincred, we encode the new attribute in the
CredentialBlob, separated by newline:
hunter2
oauth_refresh_token=xyzzy
This is extensible and backwards compatible. The credential protocol
already assumes that attribute values do not contain newlines.
This fixes test "helper (wincred) gets oauth_refresh_token" when
t0303-credential-external.sh is run with
GIT_TEST_CREDENTIAL_HELPER=wincred. This test was added in a5c76569e7
(credential: new attribute oauth_refresh_token, 2023-04-21).
Alternatives considered: store oauth_refresh_token in a wincred
attribute. This would be insecure because wincred assumes attribute
values to be non-confidential.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update two credential helpers to correctly match which credential
to erase; they dropped not the ones with stale password.
* mh/credential-erase-improvements-more:
credential/wincred: erase matching creds only
credential/libsecret: erase matching creds only
|
|
The credential erase request typically includes protocol, host, username
and password.
credential-wincred erases stored credentials that match protocol,
host and username, regardless of password.
This is confusing in the case the stored password differs from that
in the request. This case can occur when multiple credential helpers are
configured.
Only erase credential if stored password matches request (or request
omits password).
This fixes test "helper (wincred) does not erase a password distinct
from input" when t0303 is run with GIT_TEST_CREDENTIAL_HELPER set to
"wincred". This test was added in aeb21ce22e (credential: avoid
erasing distinct password, 2023-06-13).
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The credential erase request typically includes protocol, host, username
and password.
credential-libsecret erases a stored credential if it matches protocol,
host and username, regardless of password.
This is confusing in the case the stored password differs from that
in the request. This case can occur when multiple credential helpers are
configured.
Only erase credential if stored password matches request (or request
omits password).
This fixes test "helper (libsecret) does not erase a password distinct
from input" when t0303 is run with GIT_TEST_CREDENTIAL_HELPER set to
"libsecret". This test was added in aeb21ce22e (credential: avoid
erasing distinct password, 2023-06-13).
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d208bfd (credential: new attribute password_expiry_utc, 2023-02-18)
and a5c76569e7 (credential: new attribute oauth_refresh_token)
introduced new credential attributes.
libsecret assumes attribute values are non-confidential and
unchanging, so we encode the new attributes in the secret, separated by
newline:
hunter2
password_expiry_utc=1684189401
oauth_refresh_token=xyzzy
This is extensible and backwards compatible. The credential protocol
already assumes that attribute values do not contain newlines.
Alternatives considered: store password_expiry_utc in a libsecret
attribute. This has the problem that libsecret creates new items
rather than overwrites when attribute values change.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the recently invented "password expiry time" trait to the
wincred credential helper.
* mh/credential-password-expiry-wincred:
credential/wincred: store password_expiry_utc
|
|
Code clean-up.
* mh/use-wincred-from-system:
credential/wincred: include wincred.h
|
