| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 'pack-objects' and delta-encoding code paths have been updated to
use 'size_t' instead of 'unsigned long' for object sizes and offset
limits, avoiding potential truncation issues on 64-bit Windows.
* js/pack-objects-delta-size-t:
packfile: widen `unpack_object_header_buffer()` to `size_t`
git-zlib: widen `git_deflate_bound()` to `size_t`
t/helper/test-pack-deltas: widen `do_compress()`'s maxsize local to `size_t`
http-push: widen `start_put()`'s size local from `ssize_t` to `size_t`
diff: widen `deflate_it()`'s bound local from int to `size_t`
archive-zip: widen `zlib_deflate_raw()`'s maxsize local to `size_t`
packfile, git-zlib: widen `use_pack()` and zstream avail fields to `size_t`
delta: widen `create_delta()` and `diff_delta()` to `size_t`
pack-objects: widen `mem_usage` and `try_delta()`'s out-param to `size_t`
pack-objects: widen `free_unpacked()` return to `size_t`
pack-objects: widen delta-cache accounting to `size_t`
delta: widen `create_delta_index()` parameter to `size_t`
diff-delta: widen `struct delta_index`' size fields to `size_t`
|
|
These three are a single accounting tuple (the globals tracking
cumulative cached-delta bytes, plus the helper that compares them
against an incoming delta size) and are latently 32-bit on Windows where
`unsigned long` != `size_t`: a pack with many large cached deltas could
wrap silently.
The widening is internally consistent on its own: the additions and
subtractions against delta_cache_size already come from `size_t` sources
(`DELTA_SIZE()` returns `size_t`), and `delta_cacheable()`'s sole caller
in `try_delta()` still passes `unsigned long`, which promotes.
Prerequisite for dropping `try_delta()`'s `cast_size_t_to_ulong()`
shims, which becomes possible once 1create_delta()` and `diff_delta()`
are widened in a later commit.
Note: since `max_delta_cache_size` changes data type to `size_t`, a pair
of new helpers is introduced to parse config values of that type, too.
Assisted-by: Opus 4.7
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Configuration file locking has been updated to retry for a short
period, avoiding failures when multiple processes attempt to update
the configuration simultaneously.
* jt/config-lock-timeout:
config: retry acquiring config.lock, configurable via core.configLockTimeout
|
|
The tempfile and lockfile APIs have been refactored to stop depending
on the 'the_repository' global variable, and their callers have been
updated to use the repository-aware variants.
* rs/tempfile-wo-the-repository:
use repo_hold_lock_file_for_update{,_mode,_timeout}() with custom repos
tempfile: stop using the_repository
lockfile: add repo_hold_lock_file_for_update{,_timeout}{,_mode}()
refs/packed: use repo_create_tempfile()
tempfile: add repo_create_tempfile{,_mode}()
|
|
Apply the config setting core.sharedRepository from the repository at
hand instead of from the_repository.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The includeIf mechanism already supports matching on the .git
directory path (gitdir) and the currently checked out branch
(onbranch). But in multi-worktree setups the .git directory of a
linked worktree points into the main repository's .git/worktrees/
area, which makes gitdir patterns cumbersome when one wants to
include config based on the working tree's checkout path instead.
Introduce two new condition keywords:
- worktree:<pattern> matches the realpath of the current worktree's
working directory (i.e. repo_get_work_tree()) against a glob
pattern. This is the path returned by git rev-parse
--show-toplevel.
- worktree/i:<pattern> is the case-insensitive variant.
The implementation reuses the include_by_path() helper introduced in
the previous commit, passing the worktree path in place of the
gitdir. The condition never matches in bare repositories (where
there is no worktree) or during early config reading (where no
repository is available).
Add documentation describing the new conditions, including a comparison
with extensions.worktreeConfig and a note that worktree matching currently
uses the realpath-resolved worktree location. Add tests covering bare
repositories, multiple worktrees, realpath-resolved symlinked worktree
paths, case-sensitive and case-insensitive matching, early config reading,
and non-repository scenarios.
Signed-off-by: Chen Linxuan <me@black-desk.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The include_by_gitdir() function matches the realpath of a given
path against a glob pattern, but its interface is tightly coupled to
the gitdir condition: it takes a struct config_options *opts and
extracts opts->git_dir internally.
Refactor it into a more generic include_by_path() helper that takes
a const char *path parameter directly, and update the gitdir and
gitdir/i callers to pass opts->git_dir explicitly. No behavior
change, just preparing for the addition of a new worktree condition
that will reuse the same path-matching logic with a different path.
Signed-off-by: Chen Linxuan <me@black-desk.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/objects-larger-than-4gb-on-windows-more:
odb: use size_t for object_info.sizep and the size APIs
packfile,delta: drop the `cast_size_t_to_ulong()` wrappers
pack-objects: use size_t for in-core object sizes
packfile: widen unpack_entry()'s size out-parameter to size_t
pack-objects(check_pack_inflate()): use size_t instead of unsigned long
patch-delta: use size_t for sizes
compat/msvc: use _chsize_s for ftruncate
|
|
When `js/objects-larger-than-4gb-on-windows` widened the streaming,
index-pack and unpack-objects code paths, in the interest of keeping the
patches somewhat reasonably-sized, it left the public ODB API still
typed in `unsigned long`. In particular `struct object_info::sizep` and
the four wrappers built on top of it (`odb_read_object`,
`odb_read_object_peeled`, `odb_read_object_info`, `odb_pretend_object`)
still return the unpacked size through `unsigned long *`, so on Windows
`cat-file -s` and the `git add` / `git status` paths for a >4 GiB blob
silently cap at 4 GiB.
Widen the field and the four wrappers. The previous commits already
widened the `unpack_entry()` cascade and pack-objects' in-core size
accessors, so most of the cascade arrives here with no further work: the
temporary shims in `packed_object_info_with_index_pos()` and in
`unpack_entry()`'s delta-base recovery path go away, the two
`SET_SIZE(entry, cast_size_t_to_ulong(canonical_size))` calls in
`check_object()` and the matching one in `drop_reused_delta()` collapse
to plain `SET_SIZE`, and `oe_get_size_slow()`'s tail
`cast_size_t_to_ulong()` is gone too.
What remains narrow are the boundaries this series does not
intend to touch: the diff, blame, textconv and fast-import machinery.
Even so, this patch is unfortunately quite large.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config foo.bar=baz" is not likely to be a request to read the
value of such a variable with '=' in its name; rather it is plausible
that the user meant "git config set foo.bar baz". Give advice when
giving an error message.
* hn/config-typo-advice:
config: improve diagnostic for "set" with missing value
config: add git_config_key_is_valid() for quiet validation
|
|
Move the body of git_config_parse_key() into a static helper
do_parse_config_key() that takes a "quiet" flag and treats
store_key as optional. git_config_parse_key() becomes a thin
wrapper.
Add git_config_key_is_valid() for callers that only need to
know whether a key is well-formed.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Concurrent config writers race for the ".lock" file, which is taken
with open(O_EXCL) and no retry, so the losers fail right away with
"could not lock config file".
This shows up with parallel "git worktree add -b" against the same
repository: each one writes a couple of branch.* keys and the losers
fail at random. Worse, "git worktree add" doesn't propagate that
failure to its exit code, so the tracking config is silently dropped.
(The swallowed error is a separate bug.)
Retry instead of giving up on the first EEXIST. The lock is only held
while rewriting a small file, so the loser only has to wait out the
other writers. Same approach as 4ff0f01cb7 (refs: retry acquiring
reference locks for 100ms, 2017-08-21).
On the semantics: the on-disk config is read only after the lock is
taken, so writers touching different keys can't lose each other's
change. Writers touching the same key still get last-writer-wins, but
that is already the case today and would need a compare-and-swap config
API to fix. The retry only turns hard failures into successes.
Default to 1000ms, like core.packedRefsTimeout: same shape of problem,
one shared file everyone serializes through. A larger timeout only
costs anything when a stale lock is left behind by a crash, which is
rare; a smaller one fails spuriously on slow filesystems (NTFS has
been seen needing more than 100ms). Make it configurable as
core.configLockTimeout. There is no chicken-and-egg problem: we read
the config before we lock it.
microsoft/git carries a similar patch (core.configWriteLockTimeoutMS,
default off) for Scalar's tests. Defaulting to non-zero here because
the worktree case fails silently.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Next commits add a 'hook.jobs' config option of type 'unsigned int',
so add a helper to parse it since the API only supports int and ulong.
An alternative is to make 'hook.jobs' an 'int' or parse it as an 'int'
then cast it to unsigned, however it's better to use proper helpers for
the type. Using 'ulong' is another option which already has helpers, but
it's a bit excessive in size for just the jobs number.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recent glibc 2.43 release had the following change listed in its
NEWS file:
For ISO C23, the functions bsearch, memchr, strchr, strpbrk, strrchr,
strstr, wcschr, wcspbrk, wcsrchr, wcsstr and wmemchr that return
pointers into their input arrays now have definitions as macros that
return a pointer to a const-qualified type when the input argument is
a pointer to a const-qualified type.
When compiling with GCC 15, which defaults to -std=gnu23, this causes
many warnings like this:
merge-ort.c: In function ‘apply_directory_rename_modifications’:
merge-ort.c:2734:36: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
2734 | char *last_slash = strrchr(cur_path, '/');
| ^~~~~~~
This patch fixes the more obvious ones by making them const when we do
not write to the returned pointer.
Signed-off-by: Collin Funk <collin.funk1@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/parse-config-expiry-simplify:
config: use git_parse_int() in git_config_get_expiry_in_days()
|
|
git_config_get_expiry_in_days() calls git_parse_signed() with the
maximum value of int, which is equivalent to calling git_parse_int().
Do that instead, as its shorter and clearer.
This requires demoting "days" to int to match. Promote "scale" to
intmax_t in turn to arrive at the same result when multiplying them.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config get --path" segfaulted on an ":(optional)path" that
does not exist, which has been corrected.
* jc/optional-path:
config: really treat missing optional path as not configured
config: really pretend missing :(optional) value is not there
config: mark otherwise unused function as file-scope static
|
|
Earlier we added support for a value spelled as ":(optional)path"
for configuration variables whose values are of type "path", with
the documented semantics "if the path is missing, behave as if such
a variable definition is not even there."
This has worked OK for code paths that reads configuration files and
stores the configured value as a string, where NULL in such a string
is treated as if the setting is not there, left as the default.
However, there are other code paths that do not _ignore_ such NULL
values and misbehave. "git config get --path" is one of them.
When git_config_pathname() helper function finds that the value of
the variable is an optional path *and* the path is missing, it
leaves the destination pointer intact (which usually is left to
NULL) and returns 0 to signal a success. format_config() helper
however assumed that the destination pointer always gets a string,
which no longer is the case, and segfaulted.
Make sure that git_config_pathname() clears the destination pointer
in such a case, and teach format_config() to react to the condition
by returning 1 (which is different from 0 that is a normal success
and negative that is an error) to its callers. Adjust the callers
to react to this new return value that tells them to pretend as if
they did not even see this partcular <key, value> pair.
Reported-by: Han Jiang <jhcarl0814@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_configset_get_pathname() is only used once inside config.c; we do
not have to expose it as a public function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recently added configuration variable and command line option
syntax ":(optional)" for values that are of filename type
inconsistently behaved on an empty file (configuration took it
happily, while the command line option pretended as if it did not
exist), which has been corrected.
* dk/parseopt-optional-filename-fixes:
parseopt: remove unreachable code
parseopt: restore const qualifier to parsed filename
config: use boolean type for a simple flag
parseopt: use boolean type for a simple flag
doc: clarify command equivalence comment
parseopt: fix :(optional) at command line to only ignore missing files
|
|
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Configuration variables that take a pathname as a value
(e.g. blame.ignorerevsfile) can be marked as optional by prefixing
":(optoinal)" before its value.
* jc/optional-path:
parseopt: values of pathname type can be prefixed with :(optional)
config: values of pathname type can be prefixed with :(optional)
t7500: fix GIT_EDITOR shell snippet
t7500: make each piece more independent
|
|
Sometimes people want to specify additional configuration data
as "best effort" basis. Maybe commit.template configuration file points
at somewhere in ~/template/ but on a particular system, the file may not
exist and the user may be OK without using the template in such a case.
When the value given to a configuration variable whose type is
pathname wants to signal such an optional file, it can be marked by
prepending ":(optional)" in front of it. Such a setting that is
marked optional would avoid getting the command barf for a missing
file, as an optional configuration setting that names a missing
file is not even seen.
cf. <xmqq5ywehb69.fsf@gitster.g>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"core.commentChar=auto" that attempts to dynamically pick a
suitable comment character is non-workable, as it is too much
trouble to support for little benefit, and is marked as deprecated.
* pw/3.0-commentchar-auto-deprecation:
commit: print advice when core.commentString=auto
config: warn on core.commentString=auto
breaking-changes: deprecate support for core.commentString=auto
|
|
Add some advice on how to change the config settings when
"core.commentString=auto" or "core.commentChar=auto". The advice
includes instructions for clearing the config setting or setting a
fixed comment string. To try and be as specific as possible, the advice
is customized based on the user's config. If "core.commentString=auto"
is set in the system config and the user does not have write
access then the advice omits the instructions to clear the config
and recommends changing the global config instead. An alternative
approach would be to advise the user to run "git config --show-origin"
and leave them to figure out how to fix it themselves but that seems
rather unfriendly. As we're forcing them to update their config we
should try and make that as easy as possible.
In order to generate this advice we need to record each file where
either of the config keys is set and whether a key occurs more that
once in a given file. This lets us generate the list of commands to
remove all the keys and also tells us which key the "auto" setting
comes from.
As we want the user to update their config we do not provide a way
for this advice to be disabled other than changing the value of
"core.commentChar" or "core.commentString".
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As support for this setting was deprecated in the last commit print a
warning (or die when WITH_BREAKING_CHANGES is enabled) if it is set.
Avoid bombarding the user with warnings by only printing it (a) when
running commands that call "git commit" and (b) only once per command.
Some scaffolding is added to repo_read_config() to allow it to
detect deprecated config settings and warn about them. As both
"core.commentChar" and "core.commentString" set the comment
character we record which one of them is used and tailor the
warning message appropriately.
Note the odd combination of die_message() followed by die(NULL)
is to allow the next commit to insert a call to advise() in the middle.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Arrays of strbuf is often a wrong data structure to use, and
strbuf_split*() family of functions that create them often have
better alternatives.
Update several code paths and replace strbuf_split*().
* jc/strbuf-split:
trace2: do not use strbuf_split*()
trace2: trim_trailing_newline followed by trim is a no-op
sub-process: do not use strbuf_split*()
environment: do not use strbuf_split*()
config: do not use strbuf_split()
notes: do not use strbuf_split*()
merge-tree: do not use strbuf_split*()
clean: do not use strbuf_split*() [part 2]
clean: do not pass the whole structure when it is not necessary
clean: do not use strbuf_split*() [part 1]
clean: do not pass strbuf by value
wt-status: avoid strbuf_split*()
|
|
The config API had a set of convenience wrapper functions that
implicitly use the_repository instance; they have been removed and
inlined at the calling sites.
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
|
|
When parsing an old-style GIT_CONFIG_PARAMETERS environment
variable, the code parses key=value pairs by splitting them at '='
into an array of strbuf's. As strbuf_split() leaves the delimiter
at the end of the split piece, the code has to manually trim it.
If we split with string_list_split(), that becomes unnecessary.
Retire the use of strbuf_split() from this code path.
Note that the max parameter of string_list_split() is of
an ergonomically iffy design---it specifies the maximum number of
times the function is allowed to split, which means that in order to
split a text into up to 2 pieces, you have to pass 1, not 2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
pw/3.0-commentchar-auto-deprecation
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
|
|
"git commit" that concludes a conflicted merge failed to notice and remove
existing comment added automatically (like "# Conflicts:") when the
core.commentstring is set to 'auto'.
* ac/auto-comment-char-fix:
config: set comment_line_str to "#" when core.commentChar=auto
commit: avoid scanning trailing comments when 'core.commentChar' is "auto"
|
|
Remove a redundant member from kvi struct.
* pw/config-kvi-remove-path:
config: remove unneeded struct field
|
|
There are a couple of -Wsign-compare warnings in "config.c":
- `prepare_include_condition_pattern()` is returns a signed integer,
where it either returns a negative error code or the index of the
last dir separator in a path. That index will always be a
non-negative number, but we cannot just change the return type to a
`size_t` due to it being re-used as error code. This is fixed by
splitting up concerns: the return value is only used as error code,
and the prefix is now returned via an out-pointer. This fixes a sign
comparison warning when comparing `text.len < prefix`,
- We treat `struct config_store_data::seen` as signed integer in
several places even though it's unsigned.
- There are multiple trivial sign comparison warnings where we use a
signed loop index to iterate through an unsigned number of items.
Fix all of these issues and drop the `DISABLE_SIGN_COMPARE_WARNINGS`
macro.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_set()`. All
callsites are adjusted so that they use `repo_config_set(the_repository,
...)` instead. While some callsites might already have a repository
available, this mechanical conversion is the exact same as the current
situation and thus cannot cause any regression. Those sites should
eventually be cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If conflict comments already use a comment character that isn't "#", and
core.commentChar is set "auto", Git will ignore these lines during the
scan using ignored_log_message_bytes() and pick a new comment character
based on the rest of the message. The newly chosen character may be
different from the one used in the conflict comments and therefore,
these are no longer treated as comments and end up in the final commit
message.
For example, during a rebase if the user previously set
core.commentChar=% and then encounters a conflict, conflict comments
like "% Conflicts:" are generated. If the user subsequently sets
core.commentChar=auto before running `rebase --continue`, Git parses the
"auto" setting and begins scanning. It first uses the existing
'comment_line_str' (which is '%') to detect and ignore conflict comments
via ignored_log_message_bytes().
Then, Git scans the rest of the message (excluding conflict comments),
sees that none of the remaining lines start with '#' and decides to set
comment_line_str to '#'. Since the final commit character differs from
the one used in the conflict comments, those lines are no longer
considered comments and get included in the final commit message.
Set 'comment_line_str' to '#' when core.commentChar is set to 'auto' to
reset any previously set value.
While this does not solve the issue of conflict comment inclusion and
the user visible behaviour stays tha same, it standardizes the behaviour
of the code by always resetting 'comment_line_str' to '#' when
core.commentChar=auto is parsed.
The patch text is based on Phillip Wood's message:
https://lore.kernel.org/git/9e96aaab-79a2-4632-94cd-d016d4a63b30@gmail.com/
and the commit log message is wriiten by me.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around object access API.
* ps/object-store:
odb: rename `read_object_with_reference()`
odb: rename `pretend_object_file()`
odb: rename `has_object()`
odb: rename `repo_read_object_file()`
odb: rename `oid_object_info()`
odb: trivial refactorings to get rid of `the_repository`
odb: get rid of `the_repository` when handling submodule sources
odb: get rid of `the_repository` when handling the primary source
odb: get rid of `the_repository` in `for_each()` functions
odb: get rid of `the_repository` when handling alternates
odb: get rid of `the_repository` in `odb_mkstemp()`
odb: get rid of `the_repository` in `assert_oid_type()`
odb: get rid of `the_repository` in `find_odb()`
odb: introduce parent pointers
object-store: rename files to "odb.{c,h}"
object-store: rename `object_directory` to `odb_source`
object-store: rename `raw_object_store` to `object_database`
|
|
As well as receiving the config key and value, config callbacks
also receive a "struct key_value_info" containing information about
the source of the key-value pair. Accessing the "path" field of
this struct from a callback passed to repo_config() results in a
use-after-free. This happens because repo_config() first populates a
configset by calling config_with_options() and then iterates over the
configset with the callback passed by the caller. When the configset
is constructed it takes a shallow copy of the "struct key_value_info"
for each config setting. This leads to the use-after-free as the
"path" member is freed before config_with_options() returns.
We could fix this by interning the "path" field as we do
for the "filename" field but the "path" field is not actually
needed. It is populated with a copy of the "path" field from "struct
config_source". That field was added in d14d42440d8 (config: disallow
relative include paths from blobs, 2014-02-19) to distinguish between
relative include directives in files and those in blobs. However,
since 1b8132d99d8 (i18n: config: unfold error messages marked for
translation, 2016-07-28) we can differentiate these by looking at the
"origin_type" field in "struct key_value_info". So let's remove the
"path" members from "struct config_source" and "struct key_value_info"
and instead use a combination of the "filename" and "origin_type"
fields to determine the absolute path of relative includes.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Rename `repo_read_object_file()` to `odb_read_object()` to match other
functions related to the object database and our modern coding
guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* maint-2.48:
Git 2.48.2
Git 2.47.3
Git 2.46.4
Git 2.45.4
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The global variable 'core_preload_index' is used in a single function
named 'preload_index()' in "preload-index.c". Move its declaration inside
that function, removing unnecessary global state.
This change is part of an ongoing effort to eliminate global variables,
improve modularity and help libify the codebase.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.47:
Git 2.47.3
Git 2.46.4
Git 2.45.4
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
|
|
* maint-2.46:
Git 2.46.4
Git 2.45.4
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
* maint-2.45:
Git 2.45.4
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
* maint-2.44:
Git 2.44.4
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
* maint-2.43:
Git 2.43.7
wincred: avoid buffer overflow in wcsncat()
bundle-uri: fix arbitrary file writes via parameter injection
config: quote values containing CR character
git-gui: sanitize 'exec' arguments: convert new 'cygpath' calls
git-gui: do not mistake command arguments as redirection operators
git-gui: introduce function git_redir for git calls with redirections
git-gui: pass redirections as separate argument to git_read
git-gui: pass redirections as separate argument to _open_stdout_stderr
git-gui: convert git_read*, git_write to be non-variadic
git-gui: override exec and open only on Windows
gitk: sanitize 'open' arguments: revisit recently updated 'open' calls
git-gui: use git_read in githook_read
git-gui: sanitize $PATH on all platforms
git-gui: break out a separate function git_read_nice
git-gui: assure PATH has only absolute elements.
git-gui: remove option --stderr from git_read
git-gui: cleanup git-bash menu item
git-gui: sanitize 'exec' arguments: background
git-gui: avoid auto_execok in do_windows_shortcut
git-gui: sanitize 'exec' arguments: simple cases
git-gui: avoid auto_execok for git-bash menu item
git-gui: treat file names beginning with "|" as relative paths
git-gui: remove unused proc is_shellscript
git-gui: remove git config --list handling for git < 1.5.3
git-gui: remove special treatment of Windows from open_cmd_pipe
git-gui: remove HEAD detachment implementation for git < 1.5.3
git-gui: use only the configured shell
git-gui: remove Tcl 8.4 workaround on 2>@1 redirection
git-gui: make _shellpath usable on startup
git-gui: use [is_Windows], not bad _shellpath
git-gui: _which, only add .exe suffix if not present
gitk: encode arguments correctly with "open"
gitk: sanitize 'open' arguments: command pipeline
gitk: collect construction of blameargs into a single conditional
gitk: sanitize 'open' arguments: simple commands, readable and writable
gitk: sanitize 'open' arguments: simple commands with redirections
gitk: sanitize 'open' arguments: simple commands
gitk: sanitize 'exec' arguments: redirect to process
gitk: sanitize 'exec' arguments: redirections and background
gitk: sanitize 'exec' arguments: redirections
gitk: sanitize 'exec' arguments: 'eval exec'
gitk: sanitize 'exec' arguments: simple cases
gitk: have callers of diffcmd supply pipe symbol when necessary
gitk: treat file names beginning with "|" as relative paths
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
When reading the config, values that contain a trailing CRLF are
stripped. If the value itself has a trailing CR, the normal LF that
follows results in the CR being unintentionally stripped. This may lead
to unintended behavior due to the config value written being different
when it gets read.
One such issue involves a repository with a submodule path containing a
trailing CR. When the submodule gets initialized, the submodule is
cloned without being checked out and has "core.worktree" set to the
submodule path. The git-checkout(1) that gets spawned later reads the
"core.worktree" config value, but without the trailing CR, and
consequently attempts to checkout to a different path than intended.
If the repository contains a matching path that is a symlink, it is
possible for the submodule repository to be checked out in arbitrary
locations. This is extra bad when the symlink points to the submodule
hooks directory and the submodule repository contains an executable
"post-checkout" hook. Once the submodule repository checkout completes,
the "post-checkout" hook immediately executes.
To prevent mismatched config state due to misinterpreting a trailing CR,
wrap config values containing CR in double quotes when writing the
entry. This ensures a trailing CR is always separated for an LF and thus
prevented from getting stripped.
Note that this problem cannot be addressed by just quoting each CR with
"\r". The reading side of the config interprets only a few backslash
escapes, and "\r" is not among them. This fix is sufficient though
because it only affects the CR at the end of a line and any literal CR
in the interior is already preserved.
Co-authored-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
