| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A handful of code paths have been corrected to check return values
from functions like curl_easy_duphandle(), deflateInit(), lseek(),
dup(), and strbuf_getline_lf(), resolving several Coverity warnings
about unchecked returns.
* js/coverity-unchecked-returns-fix:
bisect: handle dup() failure when redirecting stdout
bisect: check get_terms return at all call sites
bisect: check strbuf_getline_lf return when reading terms
transport-helper: warn when export-marks file cannot be finalized
transport-helper: check dup() return in get_exporter
compat/pread: check initial lseek for errors
last-modified: handle repo_parse_commit() failures
reftable tests: check reftable_table_init_ref_iterator() return
reftable/block: check deflateInit() return value
reftable: handle block-writer initialization errors
config: propagate launch_editor() failure in show_editor()
http: die on curl_easy_duphandle failure in get_active_slot
|
|
A compatibility wrapper for writev(3p) has been reintroduced,
including fixes for CMake build and 'MAX_IO_SIZE' limits on NonStop.
Calls to write(3p) in send_sideband() and cat_blob() have been
refactored to use writev(3p) wrappers to reduce syscall overhead.
* ps/writev:
fast-import: use writev(3p) to send cat-blob responses
sideband: use writev(3p) to send pktlines
wrapper: properly handle MAX_IO_SIZE in writev(3p)
wrapper: introduce writev(3p) wrappers
compat/posix: introduce writev(3p) wrapper
|
|
git_pread() saves the current file offset via lseek(fd, 0,
SEEK_CUR) and later restores it. If the initial lseek fails
(e.g., the fd is a pipe or otherwise non-seekable),
current_offset is -1. This negative value is later passed to
lseek(fd, -1, SEEK_SET) at line 16, which sets the file position
to an unintended location (or fails with EINVAL on some
platforms).
Check the initial lseek return value and return -1 immediately
if it fails, consistent with the error handling for the other
lseek calls in the same function.
Pointed out by Coverity.
Assisted-by: Claude Opus 4.6
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent commit we're going to add the first caller to
writev(3p). Introduce a compatibility wrapper for this syscall that we
can use on systems that don't have this syscall.
The syscall exists on modern Unixes like Linux and macOS, and seemingly
even for NonStop according to [1]. It doesn't seem to exist on Windows
though.
[1]: http://nonstoptools.com/manuals/OSS-SystemCalls.pdf
[2]: https://www.gnu.org/software/gnulib/manual/html_node/writev.html
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git for Windows has been updated to avoid auto-detecting the symlink
type if the target path starts with a slash, preventing NTLM
credential leaks when checking out repositories with crafted
symbolic links pointing to network shares.
* js/mingw-symlink-net-share-leak:
mingw: skip symlink type auto-detection for network share targets
|
|
The 'trust_executable_bit' (coming from the 'core.filemode'
configuration) has been migrated into 'struct repo_config_values' to
tie it to a specific repository instance.
* ty/migrate-trust-executable-bit:
environment: move has_symlinks into repo_config_values
environment: move trust_executable_bit into repo_config_values
read-cache: pass 'repo' to 'ce_mode_from_stat()'
read-cache: remove redundant extern declarations
|
|
On Windows, symbolic links come in two flavors: file symlinks and
directory symlinks. Since Git was born on Linux where this distinction
does not exist, Git for Windows has to auto-detect the type by looking
at the target. When the target does not yet exist at symlink creation
time, Git for Windows creates a "phantom" file symlink and later, once
checkout is complete, calls `CreateFileW()` on the target to check
whether it is actually a directory.
If the symlink target is a UNC path (e.g. `\\attacker\share`), this
auto-detection triggers an SMB connection to the remote host. Windows
performs NTLM authentication by default for such connections, which
means a crafted repository can exfiltrate the cloning user's NTLMv2 hash
to an attacker-controlled server without any user interaction beyond
`git clone -c core.symlinks=true <url>`.
There are ways to specify UNC paths that start with only a single
backslash (e.g. `\??\UNC\host\share`); All of them do start like that,
though, so let's use that as a tell-tale that we should skip the
auto-detection in `process_phantom_symlink()`. The symlink is then left
as a file symlink (the `mklink` default), and a warning is emitted
suggesting the user set the `symlink` gitattribute to `dir` if a
directory symlink is needed. When the attribute is already set,
auto-detection is never invoked in the first place, so that code path is
unaffected.
This is the same class of vulnerability as CVE-2025-66413
(https://github.com/git-for-windows/git/security/advisories/GHSA-hv9c-4jm9-jh3x)
and follows the same general mitigation pattern that MinTTY adopted for
ANSI escape sequences referencing network share paths
(https://github.com/mintty/mintty/security/advisories/GHSA-jf4m-m6rv-p6c5).
Note that there are legitimate paths starting with a single backslash
that are _not_ network paths: drive-less absolute paths are interpreted
as relative to the current working directory's drive. In practice, these
are highly uncommon (and brittle, just one working directory change away
from breaking). In any case, the only consequence is now that the
symlink type of those has to be specified via Git attributes, is all.
Reported-by: Justin Lee <jessdhoctor@gmail.com>
Addresses: CVE-2026-32631
Assisted-by: Claude Opus 4.6
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the global 'has_symlinks' configuration into the
repository-specific 'repo_config_values' struct.
Introduce 'repo_has_symlinks()' getter for readability.
Callers access this configuration by passing in 'repo'
when possible, and explicitly fall back to
'the_repository' the rest of the time.
Introduce 'platform_has_symlinks()' macro to allow
platform specific-customization, primarily to help MinGW.
Platforms can override this in their respective headers.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Mentored-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Tian Yuchen <cat@malon.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The global configuration variable 'ignore_case' (representing the
'core.ignorecase' configuration) has been migrated into 'struct
repo_config_values' to tie it to a specific repository instance.
* ty/migrate-ignorecase:
config: use repo_ignore_case() to access core.ignorecase
environment: move ignore_case into repo_config_values
|
|
The UTF-8 precomposition wrapper on macOS has been updated to use a
flexible array member to represent the name of a directory entry,
preventing fortified libc checks from failing when the name is
reallocated to be larger than 'NAME_MAX' bytes.
* ih/precompose-flex-array:
precompose_utf8: use a flex array for d_name
|
|
Various resource leaks, invalid file descriptor closures, and process
handle ownership issues flagged by Coverity have been fixed.
* js/coverity-fixes:
mingw: make `exit_process()` own the process handle on all paths
fsmonitor: plug token-data leak on early daemon-startup failures
reftable/table: release filter on error path
imap-send: avoid leaking the IMAP upload buffer
worktree: fix resource leaks when branch creation fails
submodule: fix cwd leak in `get_superproject_working_tree()`
dir: free allocations on parse-error paths in `read_one_dir()`
line-log: avoid redundant copy that leaks in process_ranges
run-command: avoid `close(-1)` in `start_command()` error paths
download_https_uri_to_file(): do not leak fd upon failure
loose: avoid closing invalid fd on error path
load_one_loose_object_map(): fix resource leak
|
|
The global configuration variables protect_hfs and protect_ntfs have
been migrated into struct repo_config_values to tie them to
per-repository configuration state.
* ty/move-protect-hfs-ntfs:
environment: use 'repo->initialized' for repo_protect_hfs() and repo_protect_ntfs()
environment: move 'protect_hfs' and 'protect_ntfs' into 'repo_config_values'
|
|
After "mingw: kill child processes in a gentler way", the ownership of
the HANDLE passed to `exit_process()` and `terminate_process_tree()` is
inconsistent. `terminate_process_tree()` always closes the handle;
`exit_process()` closes it on success and on the terminate-tree
fallback, but leaks it on the early return where GetExitCodeProcess()
fails or reports the process is no longer STILL_ACTIVE.
`mingw_kill()` compensated by closing the handle on its own error path,
which is a double-close on every error path that does not hit that one
leaky branch -- the callee has already closed the handle by then.
Coverity flagged the resulting use-after-free as CID 1437238.
Pin down the invariant that `exit_process()` and
`terminate_process_tree()` own the handle from the call onward and close
it on every return path; with that, the bogus close in `mingw_kill()`
goes away.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On macOS, git status may abort while reading a directory entry
whose UTF-8 name grows past NAME_MAX bytes:
__chk_fail_overflow
__strlcpy_chk
precompose_utf8_readdir
read_directory_recursive
wt_status_collect
cmd_status
The precompose wrapper already reallocates dirent_prec_psx for
long names, but d_name is declared as char[NAME_MAX + 1]. A
fortified libc can still see that declared object size and reject a
larger strlcpy bound, even though the allocation was grown.
Make d_name a FLEX_ARRAY and size allocations from offsetof(). That
matches the actual object layout with the dynamic allocation, so the
fortified copy sees a destination whose size can grow with max_name_len.
Add a regression test that creates an over-NAME_MAX non-ASCII basename
and runs status with core.precomposeunicode enabled.
Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `__MINGW64__` constant is defined, surprise, surprise, only when
building for a 64-bit CPU architecture.
Therefore using it as a guard to define `_POSIX_C_SOURCE` (so that
`localtime_r()` is declared, among other functions) is not enough, we
also need to check `__MINGW32__`.
Technically, the latter constant is defined even for 64-bit builds. But
let's make things a bit easier to understand by testing for both
constants.
Making it so fixes this compile warning (turned error in GCC v14.1):
archive-zip.c: In function 'dos_time':
archive-zip.c:612:9: error: implicit declaration of function 'localtime_r';
did you mean 'localtime_s'? [-Wimplicit-function-declaration]
612 | localtime_r(&time, &tm);
| ^~~~~~~~~~~
| localtime_s
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/objects-larger-than-4gb-on-windows-more:
odb: use size_t for object_info.sizep and the size APIs
packfile,delta: drop the `cast_size_t_to_ulong()` wrappers
pack-objects: use size_t for in-core object sizes
packfile: widen unpack_entry()'s size out-parameter to size_t
pack-objects(check_pack_inflate()): use size_t instead of unsigned long
patch-delta: use size_t for sizes
compat/msvc: use _chsize_s for ftruncate
|
|
Replace the accesses to the global 'ignore_case' variable with
calls to 'repo_ignore_case(the_repository)'. This step eliminates
the 'ignore_case' global state.
Note on compat/win32/path-utils.c:
To eliminate the global state, several helper functions
(e.g. 'win32_fspathncmp()') now read from
'repo_ignore_case(the_repository)'. While this introduces
dependency on 'repository.h' into the 'compat/', it avoids massive
refactoring of the signatures across the codebase.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Mentored-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Tian Yuchen <cat@malon.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The UNUSED macro in 'compat/posix.h' has been updated to use a
newly introduced GIT_CLANG_PREREQ macro for compiler version
checks, and the existing GIT_GNUC_PREREQ macro has been modernized
to use explicit major/minor comparisons rather than bit-shifting.
* dl/posix-unused-warning-clang:
compat/posix.h: simplify GIT_GNUC_PREREQ() comparison
compat/posix.h: clean up GIT_GNUC_PREREQ() and UNUSED
compat/posix.h: enable UNUSED warning messages for Clang
|
|
Advanced emulation of kill() used on Windows in GfW has been
upstreamed to improve the symptoms like left-behind .lock files and
that fails to let the child clean-up itself when it gets killed.
* js/win-kill-child-more-gently:
mingw: really handle SIGINT
mingw: kill child processes in a gentler way
|
|
On Windows, `unsigned long` and `long` are 32 bits even on 64-bit
builds. The MSVC compatibility header has shimmed `ftruncate()` with
#define ftruncate _chsize
ever since `compat/msvc-posix.h` was introduced. `_chsize()` takes a
32-bit `long` for the new length, which silently truncates files (and
the requested size) to 2 GiB. That is enough to make t7508 test 126
"git add fails gracefully with 4 GiB and 8 GiB files" fail under
MSVC: `test-tool truncate` creates a sparse 4 GiB or 8 GiB file via
the shimmed `ftruncate()`, and the test never gets off the ground.
`_chsize_s()` is the modern replacement, accepts a 64-bit `__int64`
length, and is the only sensible target on Windows. The catch is that
it does not follow the POSIX `-1` + `errno` convention: it returns
`0` on success and an errno value (a small positive integer) on
failure. A plain `#define ftruncate _chsize_s` would therefore
silently break callers that test the return value as `< 0` or against
`-1`, of which there are several: `http.c`, `parallel-checkout.c`,
and `t/helper/test-truncate.c` among them.
Introduce a `static inline` wrapper that calls `_chsize_s()`, copies
its errno return into `errno`, and translates the result to the
familiar `-1` / `0` convention, then point `ftruncate` at the
wrapper. Place the wrapper after `#include "mingw-posix.h"` so the
`off_t` parameter resolves to the already-widened `off64_t` rather
than the 32-bit `_off_t` from `compat/vcbuild/include/unistd.h`.
MinGW is unaffected: its `ftruncate()` already takes `off_t` and
routes through `ftruncate64()` when `_FILE_OFFSET_BITS=64`, which is
the default in our build.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofixes.
* ak/typofixes:
doc: fix typos via codespell
|
|
Many core configuration variables have been migrated from global
variables into 'repo_config_values' to tie them to a specific
repository instance, avoiding cross-repository state leakage.
* ob/more-repo-config-values:
environment: move "warn_on_object_refname_ambiguity" into `struct repo_config_values`
environment: move "sparse_expect_files_outside_of_patterns" into `struct repo_config_values`
environment: move "core_sparse_checkout_cone" into `struct repo_config_values`
environment: move "precomposed_unicode" into `struct repo_config_values`
environment: move "pack_compression_level" into `struct repo_config_values`
environment: move `zlib_compression_level` into `struct repo_config_values`
environment: move "check_stat" into `struct repo_config_values`
environment: move "trust_ctime" into `struct repo_config_values`
|
|
GIT_GNUC_PREREQ() uses a glibc-style bit-shift version comparison,
which is harder to read than an explicit major/minor comparison.
Use an explicit comparison, as in many BSD <sys/cdefs.h> headers, and
drop the Linux header attribution comment because it no longer applies.
Signed-off-by: Dominik Loidolt <dominik.loidolt@univie.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the preprocessor indentation of the GIT_GNUC_PREREQ() and UNUSED
macros according to the CodingGuidelines, without changing their
behavior.
Adjust the spelling in the GIT_GNUC_PREREQ() comment block.
Signed-off-by: Dominik Loidolt <dominik.loidolt@univie.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a dedicated Clang version check for the UNUSED macro.
Commit 7c07f36ad2 (git-compat-util.h: GCC deprecated message arg only in
GCC 4.5+, 2022-10-05) restricted use of the deprecated attribute's
message argument in the UNUSED macro to GCC 4.5 or newer.
Clang identifies itself as GNUC 4.2.1 for compatibility, so
GIT_GNUC_PREREQ(4, 5) does not detect whether Clang supports the
deprecated("...") form. Add GIT_CLANG_PREREQ() macro and use it to
enable the UNUSED warning message for Clang 2.9 and newer.
Signed-off-by: Dominik Loidolt <dominik.loidolt@univie.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the global 'protect_hfs' and 'protect_ntfs' configurations
into the repository-specific 'repo_config_values' struct.
This will help with the elimination of 'the_repository'
To ensure code readability, the getter functions
'repo_protect_hfs()' and 'repo_protect_ntfs()'
have been introduced.
For now, associated functions access this configuration by
explicitly falling back to 'the_repository', which needs to
be addressed in the future.
Note: In 't/helper/test-path-utils.c', there is a function
'protect_ntfs_hfs_benchmark()' where these two global
variables are used as loop iterators. New local variables
have been created to replace them.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Ayush Chandekar <ayu.chandekar@gmail.com>
Mentored-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Tian Yuchen <cat@malon.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some typos in the documentation, comments, etc.
Fix them via codespell, and then adjust the "dump" files
used by the subversion tests to match the updated contents.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
[dscho noticed and fixed the problems in svn test]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc did final assembling of the three patches]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, we did not install any handler for Ctrl+C, but now we really
want to because the MSYS2 runtime learned the trick to call the
ConsoleCtrlHandler when Ctrl+C was pressed.
With this, hitting Ctrl+C while `git log` is running will only terminate
the Git process, but not the pager. This finally matches the behavior on
Linux and on macOS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The TerminateProcess() function does not actually leave the child
processes any chance to perform any cleanup operations. This is bad
insofar as Git itself expects its signal handlers to run.
A symptom is e.g. a left-behind .lock file that would not be left behind
if the same operation was run, say, on Linux.
To remedy this situation, we use an obscure trick: we inject a thread
into the process that needs to be killed and to let that thread run the
ExitProcess() function with the desired exit status. Thanks J Wyman for
describing this trick.
The advantage is that the ExitProcess() function lets the atexit
handlers run. While this is still different from what Git expects (i.e.
running a signal handler), in practice Git sets up signal handlers and
atexit handlers that call the same code to clean up after itself.
In case that the gentle method to terminate the process failed, we still
fall back to calling TerminateProcess(), but in that case we now also
make sure that processes spawned by the spawned process are terminated;
TerminateProcess() does not give the spawned process a chance to do so
itself.
Please note that this change only affects how Git for Windows tries to
terminate processes spawned by Git's own executables. Third-party
software that *calls* Git and wants to terminate it *still* need to make
sure to imitate this gentle method, otherwise this patch will not have
any effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `core.precomposeunicode` configuration is currently stored in the
global variable `precomposed_unicode`, which makes it shared across
repository instances within a single process.
Store it instead in `repo_config_values`, where eagerly‑parsed
repository configuration lives. `core.precomposeunicode` is parsed
eagerly because it controls Unicode path normalization on macOS,
a fundamental filesystem‑level behavior that many operations depend
on; a lazy parse could lead to inconsistent results and hamper
libification. This preserves the existing behavior while tying the
value to the repository from which it was read, avoiding cross‑
repository state leakage and continuing the effort to reduce reliance
on global configuration state.
Update all references to use `repo_config_values()`.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsmonitor daemon has been implemented for Linux.
* pt/fsmonitor-linux:
fsmonitor: convert shown khash to strset in do_handle_client
fsmonitor: add tests for Linux
fsmonitor: add timeout to daemon stop command
fsmonitor: close inherited file descriptors and detach in daemon
run-command: add close_fd_above_stderr option
fsmonitor: implement filesystem change listener for Linux
fsmonitor: rename fsm-settings-darwin.c to fsm-settings-unix.c
fsmonitor: rename fsm-ipc-darwin.c to fsm-ipc-unix.c
fsmonitor: use pthread_cond_timedwait for cookie wait
compat/win32: add pthread_cond_timedwait
fsmonitor: fix hashmap memory leak in fsmonitor_run_daemon
fsmonitor: fix khash memory leak in do_handle_client
t9210, t9211: disable GIT_TEST_SPLIT_INDEX for scalar clone tests
|
|
Stop using unmaintained custom allocator in Windows build which was
the last user of the code.
* js/mingw-no-nedmalloc:
mingw: remove the vendored compat/nedmalloc/ subtree
mingw: drop the build-system plumbing for nedmalloc
mingw: stop using nedmalloc
|
|
Stop using unmaintained custom allocator in Windows build which was
the last user of the code.
* js/mingw-no-nedmalloc:
mingw: remove the vendored compat/nedmalloc/ subtree
mingw: drop the build-system plumbing for nedmalloc
mingw: stop using nedmalloc
|
|
Update code paths that assumed "unsigned long" was long enough for
"size_t".
* js/objects-larger-than-4gb-on-windows:
ci: run expensive tests on push builds to integration branches
t5608: mark >4GB tests as EXPENSIVE
test-tool synthesize: add precomputed SHA-256 pack for 4 GiB + 1
test-tool synthesize: precompute pack for 4 GiB + 1
test-tool synthesize: use the unsafe hash for speed
t5608: add regression test for >4GB object clone
test-tool: add a helper to synthesize large packfiles
delta, packfile: use size_t for delta header sizes
odb, packfile: use size_t for streaming object sizes
git-zlib: handle data streams larger than 4GB
index-pack, unpack-objects: use size_t for object size
|
|
To test Git's behavior with very large pack files, we need a way to
generate such files quickly.
A naive approach using only readily-available Git commands would take
over 10 hours for a 4GB pack file, which is prohibitive.
Side-stepping Git's machinery and actual zlib compression by writing
uncompressed content with the appropriate zlib header makes things
much faster. The fastest method using this approach generates many
small, unreachable blob objects and takes about 1.5 minutes for 4GB.
However, this cannot be used because we need to test git clone, which
requires a reachable commit history.
Generating many reachable commits with small, uncompressed blobs takes
about 4 minutes for 4GB. But this approach 1) does not reproduce the
issues we want to fix (which require individual objects larger than
4GB) and 2) is comparatively slow because of the many SHA-1
calculations.
The approach taken here generates a single large blob (filled with NUL
bytes), along with the trees and commits needed to make it reachable.
This takes about 2.5 minutes for 4.5GB, which is the fastest option
that produces a valid, clonable repository with an object large enough
to trigger the bugs we want to test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous two commits stopped opting into nedmalloc on Windows
and stripped out the build-system plumbing that referenced it; the
compat/nedmalloc/ subtree now has no callers and no consumers in
the build, so retire it from the tree.
Note that this patch is larger than can be sent via the mailing
list, and was originally sent in three-pieces and merged back on the
receiving end.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At some point between Windows 10 Build 17134.1304 and Build 18363.657,
the default behavior of `DeleteFileW()` was changed to use POSIX
semantics (https://stackoverflow.com/a/60512798). Under those semantics,
a file can be deleted even when another process holds an active
`MapViewOfFile` view on it: the directory entry is removed immediately,
but the underlying data persists until the last handle is closed.
On older Windows versions (and Windows 10 builds before that change),
`DeleteFileW()` uses legacy semantics where deletion fails outright if
any process holds a file mapping.
To allow testing code paths that depend on the legacy behavior, introduce
a `GIT_TEST_LEGACY_DELETE` environment variable. When set, `mingw_unlink()`
uses `SetFileInformationByHandle()` with `FileDispositionInfo` (the
non-POSIX variant) instead of `DeleteFileW()`, forcing legacy delete
semantics regardless of the Windows version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement the built-in fsmonitor daemon for Linux using the inotify
API, bringing it to feature parity with the existing Windows and macOS
implementations.
The implementation uses inotify rather than fanotify because fanotify
requires either CAP_SYS_ADMIN or CAP_PERFMON capabilities, making it
unsuitable for an unprivileged user-space daemon. While inotify has
the limitation of requiring a separate watch on every directory (unlike
macOS's FSEvents, which can monitor an entire directory tree with a
single watch), it operates without elevated privileges and provides
the per-file event granularity needed for fsmonitor.
The listener uses inotify_init1(O_NONBLOCK) with a poll loop that
checks for events with a 50-millisecond timeout, keeping the inotify
queue well-drained to minimize the risk of overflows. Bidirectional
hashmaps map between watch descriptors and directory paths for efficient
event resolution. Directory renames are tracked using inotify's cookie
mechanism to correlate IN_MOVED_FROM and IN_MOVED_TO event pairs; a
periodic check detects stale renames where the matching IN_MOVED_TO
never arrived, forcing a resync.
New directory creation triggers recursive watch registration to ensure
all subdirectories are monitored. The IN_MASK_CREATE flag is used
where available to prevent modifying existing watches, with a fallback
for older kernels. When IN_MASK_CREATE is available and
inotify_add_watch returns EEXIST, it means another thread or recursive
scan has already registered the watch, so it is safe to ignore.
Remote filesystem detection uses statfs() to identify network-mounted
filesystems (NFS, CIFS, SMB, FUSE, etc.) via their magic numbers.
Mount point information is read from /proc/mounts and matched against
the statfs f_fsid to get accurate, human-readable filesystem type names
for logging. When the .git directory is on a remote filesystem, the
IPC socket falls back to $HOME or a user-configured directory via the
fsmonitor.socketDir setting.
Based-on-patch-by: Eric DeCosta <edecosta@mathworks.com>
Based-on-patch-by: Marziyeh Esipreh <marziyeh.esipreh@gmail.com>
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsmonitor settings logic in fsm-settings-darwin.c is not
Darwin-specific and will be reused by the upcoming Linux
implementation. Rename it to fsm-settings-unix.c to reflect that it
is shared by all Unix platforms.
Update the build files (meson.build and CMakeLists.txt) to use
FSMONITOR_OS_SETTINGS for fsm-settings, matching the approach already
used for fsm-ipc.
Based-on-patch-by: Eric DeCosta <edecosta@mathworks.com>
Based-on-patch-by: Marziyeh Esipreh <marziyeh.esipreh@gmail.com>
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsmonitor IPC path logic in fsm-ipc-darwin.c is not
Darwin-specific and will be reused by the upcoming Linux
implementation. Rename it to fsm-ipc-unix.c to reflect that it
is shared by all Unix platforms.
Introduce FSMONITOR_OS_SETTINGS (set to "unix" for non-Windows, "win32"
for Windows) as a separate variable from FSMONITOR_DAEMON_BACKEND so
that the build files can distinguish between platform-specific files
(listen, health, path-utils) and shared Unix files (ipc, settings).
Move fsm-ipc to the FSMONITOR_OS_SETTINGS section in the Makefile, and
switch fsm-path-utils to use FSMONITOR_DAEMON_BACKEND since path-utils
is platform-specific (there will be separate darwin and linux versions).
Based-on-patch-by: Eric DeCosta <edecosta@mathworks.com>
Based-on-patch-by: Marziyeh Esipreh <marziyeh.esipreh@gmail.com>
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a pthread_cond_timedwait() implementation to the Windows pthread
compatibility layer using SleepConditionVariableCS() with a millisecond
timeout computed from the absolute deadline.
Signed-off-by: Paul Tarjan <github@paulisageek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 3b9b2c2a29a1d529ca9884fa0a6529f6e2496abe; let's
not use writev() for now.
|
|
1edeb9a (Win32: warn if the console font doesn't support Unicode,
2014-06-10) introduced both code to detect the current console font on
Windows Vista and newer and a fallback for older systems to detect the
default console font and issue a warning if that font doesn't support
unicode.
Since we haven't supported any Windows older than Vista in almost a
decade, we don't need to keep the workaround.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git for Windows doesn't support anything prior to Windows 8.1 since 2.47.0
and Git followed along with commits like ce6ccba (mingw: drop Windows
7-specific work-around, 2025-08-04).
There is no need to pretend to the compiler that we still support Windows
Vista, just to lock us out of easy access to newer APIs. There is also no
need to have conflicting and unused definitions claiming we support some
versions of Windows XP or even Windows NT 4.0.
Bump all definitions of _WIN32_WINNT to a realistic value of Windows 8.1.
This will also simplify code for a followup commit that will improve cpu
core detection on multi-socket systems.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `mingw_strftime()` wrapper exists to work around msvcrt.dll's
incomplete `strftime()` implementation by dynamically loading the
version from ucrtbase.dll at runtime via `LoadLibrary()` +
`GetProcAddress()`. When the binary is already linked against UCRT
(i.e. when building in the UCRT64 environment), the linked-in
`strftime()` is the ucrtbase.dll version, making the dynamic loading
needless churn: It's calling the very same code.
Simply guard both the declaration and implementation so that the
unnecessary work-around is skipped in UCRT builds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently some GitHub CI jobs were broken by update on the platform
side, which was eventually resolved by image rollback, but in the
meantime Dscho invented a workaround patch to sidestep the broken
part of the platform. Their future image update may contain the
same bug, in which case the workaround may again become needed.
As we do not want to be building with workaround that avoids system
regexp library altogether unless the system is known to be broken,
so short of an automated "detect broken system and apply workaround"
mechanism, let's use the folks who are compiling the code to detect
breakage on their system and cope with the breakage ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce system overhead "git upload-pack" spends on relaying "git
pack-objects" output to the "git fetch" running on the other end of
the connection.
* ps/upload-pack-buffer-more-writes:
builtin/pack-objects: reduce lock contention when writing packfile data
csum-file: drop `hashfd_throughput()`
csum-file: introduce `hashfd_ext()`
sideband: use writev(3p) to send pktlines
wrapper: introduce writev(3p) wrappers
compat/posix: introduce writev(3p) wrapper
upload-pack: reduce lock contention when writing packfile data
upload-pack: prefer flushing data over sending keepalive
upload-pack: adapt keepalives based on buffering
upload-pack: fix debug statement when flushing packfile data
|
|
In a subsequent commit we're going to add the first caller to
writev(3p). Introduce a compatibility wrapper for this syscall that we
can use on systems that don't have this syscall.
The syscall exists on modern Unixes like Linux and macOS, and seemingly
even for NonStop according to [1]. It doesn't seem to exist on Windows
though.
[1]: http://nonstoptools.com/manuals/OSS-SystemCalls.pdf
[2]: https://www.gnu.org/software/gnulib/manual/html_node/writev.html
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add process ancestry data to trace2 on macOS to match what we
already do on Linux and Windows. Also adjust the way Windows
implementation reports this information to match the other two.
* mc/tr2-process-ancestry-cleanup:
t0213: add trace2 cmd_ancestry tests
test-tool: extend trace2 helper with 400ancestry
trace2: emit cmd_ancestry data for Windows
trace2: refactor Windows process ancestry trace2 event
build: include procinfo.c impl for macOS
trace2: add macOS process ancestry tracing
|
|
Allow recording process ID of the process that holds the lock next
to a lockfile for diagnosis.
* pc/lockfile-pid:
lockfile: add PID file for debugging stale locks
|
