| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 'reprepare()' callback for object database sources has been
generalized into a 'prepare()' callback with an optional flush cache
flag, and a new 'odb_prepare()' wrapper has been introduced to allow
pre-opening object database sources.
* ps/odb-generalize-prepare:
odb: introduce `odb_prepare()`
odb/source: generalize `reprepare()` callback
|
|
The packed object source has been refactored into a proper struct
odb_source.
* ps/odb-source-packed:
odb/source-packed: drop pointer to "files" parent source
midx: refactor interfaces to work on "packed" source
odb/source-packed: stub out remaining functions
odb/source-packed: wire up `freshen_object()` callback
odb/source-packed: wire up `find_abbrev_len()` callback
odb/source-packed: wire up `count_objects()` callback
odb/source-packed: wire up `for_each_object()` callback
odb/source-packed: wire up `read_object_stream()` callback
odb/source-packed: wire up `read_object_info()` callback
packfile: use higher-level interface to implement `has_object_pack()`
odb/source-packed: wire up `reprepare()` callback
odb/source-packed: wire up `close()` callback
odb/source-packed: start converting to a proper `struct odb_source`
odb/source-packed: store pointer to "files" instead of generic source
packfile: move packed source into "odb/" subsystem
packfile: split out packfile list logic
packfile: rename `struct packfile_store` to `odb_source_packed`
|
|
Introduce `odb_prepare()` as a simple wrapper to prepare alternates and
then prepare each individual source. Adapt git-grep(1) to use it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `reprepare()` callback function can be used to flush caches of a
given object source and then prepare it anew. This is for example used
when a concurrent process may have written new objects. Ultimately, this
can be seen as doing two separate steps:
1. We drop any caches.
2. We prepare the source.
We have one callsite in git-grep(1) though that really only want to do
(2). This is done by reaching into the "files" backend directly and then
calling `odb_source_packed_prepare()`, which of course may not work with
alternate backends.
We could in theory just call `reprepare()` here, and that would likely
not have any significant downside. But this would certainly feel like a
code smell.
Instead, generalize the `reprepare()` callback to `prepare()` with a
flag that optionally instructs the backend to also flush the caches,
which allows us to drop the external `odb_source_packed_prepare()`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the logic to prepare and reprepare the "packed" source into
"odb/source-packed.c" and wire it up as the `reprepare()` callback.
Note that "preparing" a source is not yet generic. Eventually, it would
probably make sense to turn the existing `reprepare()` callback into a
`prepare()` callback with an optional flag to force re-preparing. But
this step will be handled in a separate patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `js/objects-larger-than-4gb-on-windows` widened the streaming,
index-pack and unpack-objects code paths, in the interest of keeping the
patches somewhat reasonably-sized, it left the public ODB API still
typed in `unsigned long`. In particular `struct object_info::sizep` and
the four wrappers built on top of it (`odb_read_object`,
`odb_read_object_peeled`, `odb_read_object_info`, `odb_pretend_object`)
still return the unpacked size through `unsigned long *`, so on Windows
`cat-file -s` and the `git add` / `git status` paths for a >4 GiB blob
silently cap at 4 GiB.
Widen the field and the four wrappers. The previous commits already
widened the `unpack_entry()` cascade and pack-objects' in-core size
accessors, so most of the cascade arrives here with no further work: the
temporary shims in `packed_object_info_with_index_pos()` and in
`unpack_entry()`'s delta-base recovery path go away, the two
`SET_SIZE(entry, cast_size_t_to_ulong(canonical_size))` calls in
`check_object()` and the matching one in `drop_reused_delta()` collapse
to plain `SET_SIZE`, and `oe_get_size_slow()`'s tail
`cast_size_t_to_ulong()` is gone too.
What remains narrow are the boundaries this series does not
intend to touch: the diff, blame, textconv and fast-import machinery.
Even so, this patch is unfortunately quite large.
Assisted-by: Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many uses of the_repository has been updated to use a more
appropriate struct repository instance in setup.c codepath.
* ps/setup-wo-the-repository:
setup: stop using `the_repository` in `init_db()`
setup: stop using `the_repository` in `create_reference_database()`
setup: stop using `the_repository` in `initialize_repository_version()`
setup: stop using `the_repository` in `check_repository_format()`
setup: stop using `the_repository` in `upgrade_repository_format()`
setup: stop using `the_repository` in `setup_git_directory()`
setup: stop using `the_repository` in `setup_git_directory_gently()`
setup: stop using `the_repository` in `setup_git_env()`
setup: stop using `the_repository` in `set_git_work_tree()`
setup: stop using `the_repository` in `setup_work_tree()`
setup: stop using `the_repository` in `enter_repo()`
setup: stop using `the_repository` in `verify_non_filename()`
setup: stop using `the_repository` in `verify_filename()`
setup: stop using `the_repository` in `path_inside_repo()`
setup: stop using `the_repository` in `prefix_path()`
setup: stop using `the_repository` in `is_inside_work_tree()`
setup: stop using `the_repository` in `is_inside_git_dir()`
setup: replace use of `the_repository` in static functions
|
|
Stop using `the_repository` in `setup_git_directory()` and instead
accept the repository as a parameter. The injection of `the_repository`
is thus bumped one level higher, where callers now pass it in
explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in `setup_work_tree()` and instead accept
the repository as a parameter. The injection of `the_repository` is thus
bumped one level higher, where callers now pass it in explicitly.
Note that the function tracks two bits of information via global
variables. This of course doesn't make much sense anymore now that we
can set up worktrees for arbitrary repositories:
- We track whether the worktree has already been initialized and, if
so, we skip the call to `chdir_notify()` and setenv(3p). It does not
make much sense to store this info in the repository, as we _would_
want to update the environment when switching between worktrees back
and forth.
So instead of storing this info in the repository, we drop this
state entirely and live with the fact that we may execute the logic
twice. It should ultimately be idempotent though and thus not be
much of a problem.
- We track whether the worktree configuration is bogus. If so, and if
later on some caller tries to setup the worktree, then we'll die
instead. This is indeed information that we can move into the
repository itself.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in `verify_non_filename()` and instead
accept the repository as a parameter. The injection of `the_repository`
is thus bumped one level higher, where callers now pass it in
explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in `verify_filename()` and instead accept
the repository as a parameter. The injection of `the_repository` is thus
bumped one level higher, where callers now pass it in explicitly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In partial clones, `git grep` fetches necessary blobs on-demand one
at a time, which can be very slow. In partial clones, add an extra
preliminary walk over the tree similar to grep_tree() which collects
the blobs of interest, and then prefetches them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The object source API is getting restructured to allow plugging new
backends.
* ps/odb-sources:
odb/source: make `begin_transaction()` function pluggable
odb/source: make `write_alternate()` function pluggable
odb/source: make `read_alternates()` function pluggable
odb/source: make `write_object_stream()` function pluggable
odb/source: make `write_object()` function pluggable
odb/source: make `freshen_object()` function pluggable
odb/source: make `for_each_object()` function pluggable
odb/source: make `read_object_stream()` function pluggable
odb/source: make `read_object_info()` function pluggable
odb/source: make `close()` function pluggable
odb/source: make `reprepare()` function pluggable
odb/source: make `free()` function pluggable
odb/source: introduce source type for robustness
odb: move reparenting logic into respective subsystems
odb: embed base source in the "files" backend
odb: introduce "files" source
odb: split `struct odb_source` into separate header
|
|
The "files" backend is implemented as a pointer in the `struct
odb_source`. This contradicts our typical pattern for pluggable backends
like we use it for example in the ref store or for object database
streams, where we typically embed the generic base structure in the
specialized implementation. This pattern has a couple of small benefits:
- We avoid an extra allocation.
- We hide implementation details in the generic structure.
- We can easily downcast from a generic backend to the specialized
structure and vice versa because the offsets are known at compile
time.
- It becomes trivial to identify locations where we depend on backend
specific logic because the cast needs to be explicit.
Refactor our "files" object database source to do the same and embed the
`struct odb_source` in the `struct odb_source_files`.
There are still a bunch of sites in our code base where we do have to
access internals of the "files" backend. The intent is that those will
go away over time, but this will certainly take a while. Meanwhile,
provide a `odb_source_files_downcast()` function that can convert a
generic source into a "files" source.
As we only have a single source the downcast succeeds unconditionally
for now. Eventually though the intent is to make the cast `BUG()` in
case the caller requests to downcast a non-"files" backend to a "files"
backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new "files" object database source. This source encapsulates
access to both loose object files and the packfile store, similar to how
the "files" backend for refs encapsulates access to loose refs and the
packed-refs file.
Note that for now the "files" source is still a direct member of a
`struct odb_source`. This architecture will be reversed in the next
commit so that the files source contains a `struct odb_source`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core.attributesfile is intended to be set per repository, but
were kept track of by a single global variable in-core, which has
been corrected by moving it to per-repository data structure.
* ob/core-attributesfile-in-repository:
environment: move "branch.autoSetupMerge" into `struct repo_config_values`
environment: stop using core.sparseCheckout globally
environment: stop storing `core.attributesFile` globally
|
|
The config value `core.sparseCheckout` is parsed in
`git_default_core_config()` and stored globally in
`core_apply_sparse_checkout`. This could cause it to be overwritten
by another repository when different Git repositories run in the same
process.
Move the parsed value into `struct repo_config_values` in the_repository
to retain current behaviours and move towards libifying Git.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Olamide Caleb Bello <belkid98@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling `packfile_store_prepare()` we prepare not only the provided
packfile store, but also all those of all other sources part of the same
object database. This was required when the store was still sitting on
the object database level. But now that it sits on the source level it's
not anymore.
Refactor the code so that we only prepare the single packfile store
passed by the caller. Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The packfile store is a member of `struct object_database`, which means
that we have a single store per database. This doesn't really make much
sense though: each source connected to the database has its own set of
packfiles, so there is a conceptual mismatch here. This hasn't really
caused much of a problem in the past, but with the advent of pluggable
object databases this is becoming more of a problem because some of the
sources may not even use packfiles in the first place.
Move the packfile store down by one level from the object database into
the object database source. This ensures that each source now has its
own packfile store, and we can eventually start to abstract it away
entirely so that the caller doesn't even know what kind of store it
uses.
Note that we only need to adjust a relatively small number of callers,
way less than one might expect. This is because most callers are using
`repo_for_each_pack()`, which handles enumeration of all packfiles that
exist in the repository. So for now, none of these callers need to be
adapted. The remaining callers that iterate through the packfiles
directly and that need adjustment are those that are a bit more tangled
with packfiles. These will be adjusted over time.
Note that this patch only moves the packfile store, and there is still a
bunch of functions that seemingly operate on a packfile store but that
end up iterating over all sources. These will be adjusted in subsequent
commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using multiple threads in git-grep(1) we eagerly preload both the
gitmodules file as well as the packfiles so that the threads won't race
with one another to initialize these data structures.
For packfiles, this is done by calling `packfile_store_get_packs()`,
which first loads our packfiles and then returns a pointer to the first
such packfile. This pointer is ignored though, as all we really care
about is that `packfile_store_prepare()` was called.
Historically, that function was file-local to "packfile.c", but that
changed with 4188332569 (packfile: move `get_multi_pack_index()` into
"midx.c", 2025-09-02). We can thus simplify the code by calling that
function directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ps/remove-packfile-store-get-packs
* tb/incremental-midx-part-3.1: (64 commits)
builtin/repack.c: clean up unused `#include`s
repack: move `write_cruft_pack()` out of the builtin
repack: move `write_filtered_pack()` out of the builtin
repack: move `pack_kept_objects` to `struct pack_objects_args`
repack: move `finish_pack_objects_cmd()` out of the builtin
builtin/repack.c: pass `write_pack_opts` to `finish_pack_objects_cmd()`
repack: extract `write_pack_opts_is_local()`
repack: move `find_pack_prefix()` out of the builtin
builtin/repack.c: use `write_pack_opts` within `write_cruft_pack()`
builtin/repack.c: introduce `struct write_pack_opts`
repack: 'write_midx_included_packs' API from the builtin
builtin/repack.c: inline packs within `write_midx_included_packs()`
builtin/repack.c: pass `repack_write_midx_opts` to `midx_included_packs`
builtin/repack.c: inline `remove_redundant_bitmaps()`
builtin/repack.c: reorder `remove_redundant_bitmaps()`
repack: keep track of MIDX pack names using existing_packs
builtin/repack.c: use a string_list for 'midx_pack_names'
builtin/repack.c: extract opts struct for 'write_midx_included_packs()'
builtin/repack.c: remove ref snapshotting from builtin
repack: remove pack_geometry API from the builtin
...
|
|
The `get_packed_git()` function prepares the packfile store and then
returns its packfiles. Refactor it to accept a packfile store instead of
a repository to clarify its scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config_get_bool()`. All
callsites are adjusted so that they use
`repo_config_get_bool(the_repository, ...)` instead. While some
callsites might already have a repository available, this mechanical
conversion is the exact same as the current situation and thus cannot
cause any regression. Those sites should eventually be cleaned up in a
later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `read_object_with_reference()` to `odb_read_object_peeled()` to
match other functions related to the object database and our modern
coding guidelines. Furthermore though, the old name didn't really
describe very well what this function actually does, which is to walk
down any commit and tag objects until an object of the required type has
been found. This is generally referred to as "peeling", so the new name
should be way more descriptive.
No compatibility wrapper is introduced as the function is not used a lot
throughout our codebase.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `repo_read_object_file()` to `odb_read_object()` to match other
functions related to the object database and our modern coding
guidelines.
Introduce a compatibility wrapper so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename `oid_object_info()` to `odb_read_object_info()` as well as their
`_extended()` variant to match other functions related to the object
database and our modern coding guidelines.
Introduce compatibility wrappers so that any in-flight topics will
continue to compile.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--recursive" flag for git-grep(1) allows users to grep for a string
across submodule boundaries. To make this work we add each submodule's
object sources to our own object database so that the objects can be
accessed directly.
The infrastructure for this depends on a global string list of submodule
paths. The caller is expected to call `add_submodule_odb_by_path()` for
each source and the object database will then eventually register all
submodule sources via `do_oid_object_info_extended()` in case it isn't
able to look up a specific object.
This reliance on global state is of course suboptimal with regards to
our libification efforts.
Refactor the logic so that the list of submodule sources is instead
tracked in the object database itself. This allows us to lose the
condition of `r == the_repository` before registering submodule sources
as we only ever add submodule sources to `the_repository` anyway. As
such, behaviour before and after this refactoring should always be the
same.
Rename the functions accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions to manage alternates all depend on `the_repository`.
Refactor them to accept an object database as a parameter and adjust all
callers. The functions are renamed accordingly.
Note that right now the situation is still somewhat weird because we end
up using the object store path provided by the object store's repository
anyway. Consequently, we could have instead passed in a pointer to the
repository instead of passing in the pointer to the object store. This
will be addressed in subsequent commits though, where we will start to
use the path owned by the object store itself.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the preceding commits we have renamed the structures contained in
"object-store.h" to `struct object_database` and `struct odb_backend`.
As such, the code files "object-store.{c,h}" are confusingly named now.
Rename them to "odb.{c,h}" accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `object_directory` structure is used as an access point for a single
object directory like ".git/objects". While the structure isn't yet
fully self-contained, the intent is for it to eventually contain all
information required to access objects in one specific location.
While the name "object directory" is a good fit for now, this will
change over time as we continue with the agenda to make pluggable object
databases a thing. Eventually, objects may not be accessed via any kind
of directory at all anymore, but they could instead be backed by any
kind of durable storage mechanism. While it seems quite far-fetched for
now, it is thinkable that eventually this might even be some form of a
database, for example.
As such, the current name of this structure will become worse over time
as we evolve into the direction of pluggable ODBs. Immediate next steps
will start to carve out proper self-contained object directories, which
requires us to pass in these object directories as parameters. Based on
our modern naming schema this means that those functions should then be
named after their subsystem, which means that we would start to bake the
current name into the codebase more and more.
Let's preempt this by renaming the structure. There have been a couple
alternatives that were discussed:
- `odb_backend` was discarded because it led to the association that
one object database has a single backend, but the model is that one
alternate has one backend. Furthermore, "backend" is more about the
actual backing implementation and less about the high-level concept.
- `odb_alternate` was discarded because it is a bit of a stretch to
also call the main object directory an "alternate".
Instead, pick `odb_source` as the new name. It makes it sufficiently
clear that there can be multiple sources and does not cause confusion
when mixed with the already-existing "alternate" terminology.
In the future, this change allows us to easily introduce for example a
`odb_files_source` and other format-specific implementations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update parse-options API to catch mistakes to pass address of an
integral variable of a wrong type/size.
* ps/parse-options-integers:
parse-options: detect mismatches in integer signedness
parse-options: introduce precision handling for `OPTION_UNSIGNED`
parse-options: introduce precision handling for `OPTION_INTEGER`
parse-options: rename `OPT_MAGNITUDE()` to `OPT_UNSIGNED()`
parse-options: support unit factors in `OPT_INTEGER()`
global: use designated initializers for options
parse: fix off-by-one for minimum signed values
|
|
It was reported that "t5620-backfill.sh" fails on s390x and sparc64 in a
test that exercises the "--min-batch-size" command line option. The
symptom was that the option didn't seem to have an effect: we didn't
fetch objects with a batch size of 20, but instead fetched all objects
at once.
As it turns out, the root cause is that `--min-batch-size` uses
`OPT_INTEGER()` to parse the command line option. While this macro
expects the caller to pass a pointer to an integer, we instead pass a
pointer to a `size_t`. This coincidentally works on most platforms, but
it breaks apart on the mentioned platforms because they are big endian.
This issue isn't specific to git-backfill(1): there are a couple of
other places where we have the same type confusion going on. This
indicates that the issue really is the interface that the parse-options
subsystem provides -- it is simply too easy to get this wrong as there
isn't any kind of compiler warning, and things just work on the most
common systems.
Address the systemic issue by introducing two new build asserts
`BARF_UNLESS_SIGNED()` and `BARF_UNLESS_UNSIGNED()`. As the names
already hint at, those macros will cause a compiler error when passed a
value that is not signed or unsigned, respectively.
Adapt `OPT_INTEGER()`, `OPT_UNSIGNED()` as well as `OPT_MAGNITUDE()` to
use those asserts. This uncovers a small set of sites where we indeed
have the same bug as in git-backfill(1). Adapt all of them to use the
correct option.
Reported-by: Todd Zullinger <tmz@pobox.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we expose macros for most of our different option types understood
by the "parse-options" subsystem, not every combination of fields that
has one as that would otherwise quickly lead to an explosion of macros.
Instead, we just initialize structures manually for those variants of
fields that don't have a macro.
Callsites that open-code these structure initialization don't use
designated initializers though and instead just provide values for each
of the fields that they want to initialize. This has three significant
downsides:
- Callsites need to specify all values up to the last field that they
care about. This often includes fields that should simply be left at
their default zero-initialized state, which adds distraction.
- Any reader not deeply familiar with the layout of the structure
has a hard time figuring out what the respective initializers mean.
- Reordering or introducing new fields in the middle of the structure
is impossible without adapting all callsites.
Convert all sites to instead use designated initializers, which we have
started using in our codebase quite a while ago. This allows us to skip
any default-initialized fields, gives the reader context by specifying
the field names and allows us to reorder or introduce new fields where
we want to.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "object-store-ll.h" header has been introduced to keep transitive
header dependendcies and compile times at bay. Now that we have created
a new "object-store.c" file though we can easily move the last remaining
additional bit of "object-store.h", the `odb_path_map`, out of the
header.
Do so. As the "object-store.h" header is now equivalent to its low-level
alternative we drop the latter and inline it into the former.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `null_oid()` function returns the object ID that only consists of
zeroes. Naturally, this ID also depends on the hash algorithm used, as
the number of zeroes is different between SHA1 and SHA256. Consequently,
the function returns the hash-algorithm-specific null object ID.
This is currently done by depending on `the_hash_algo`, which implicitly
makes us depend on `the_repository`. Refactor the function to instead
pass in the hash algorithm for which we want to retrieve the null object
ID. Adapt callsites accordingly by passing in `the_repository`, thus
bubbling up the dependency on that global variable by one layer.
There are a couple of trivial exceptions for subsystems that already got
rid of `the_repository`. These subsystems instead use the repository
that is available via the calling context:
- "builtin/grep.c"
- "grep.c"
- "refs/debug.c"
There are also two non-trivial exceptions:
- "diff-no-index.c": Here we know that we may not have a repository
initialized at all, so we cannot rely on `the_repository`. Instead,
we adapt `diff_no_index()` to get a `struct git_hash_algo` as
parameter. The only caller is located in "builtin/diff.c", where we
know to call `repo_set_hash_algo()` in case we're running outside of
a Git repository. Consequently, it is fine to continue passing
`the_repository->hash_algo` even in this case.
- "builtin/ls-files.c": There is an in-flight patch series that drops
`USE_THE_REPOSITORY_VARIABLE` in this file, which causes a semantic
conflict because we use `null_oid()` in `show_submodule()`. The
value is passed to `repo_submodule_init()`, which may use the object
ID to resolve a tree-ish in the superproject from which we want to
read the submodule config. As such, the object ID should refer to an
object in the superproject, and consequently we need to use its hash
algorithm.
This means that we could in theory just not bother about this edge
case at all and just use `the_repository` in "diff-no-index.c". But
doing so would feel misdesigned.
Remove the `USE_THE_REPOSITORY_VARIABLE` preprocessor define in
"hash.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a couple of functions exposed by "object.c" that implicitly
depend on `the_repository`. Remove this dependency by injecting the
repository via a parameter. Adapt callers accordingly by simply using
`the_repository`, except in cases where the subsystem is already free of
the repository. In that case, we instead pass the repository provided by
the caller's context.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop using `the_repository` in the "pager" subsystem by passing in a
repository when setting up the pager and when configuring it.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When executing with `--max-count=0` we'll return early from git-grep(1)
without performing any cleanup, which causes memory leaks. Plug these.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even when `get_oid_with_context()` fails it may have allocated some data
in the object context. But we do not release it in git-grep(1) when the
call fails, leading to a memory leak. Plug it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While it is documented in `struct object_context::path` that this
variable needs to be released by the caller, this fact is rather easy to
miss given that we do not ever provide a function to release the object
context. And of course, while some callers dutifully release the path,
many others don't.
Introduce a new `object_context_release()` function that releases the
path. Convert callsites that used to free the path to use that new
function and add missing calls to callsites that were leaking memory.
Refactor those callsites as required to have a single return path, only.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
|
|
The code paths that call repo_read_object_file() have been
tightened to react to errors.
* js/check-null-from-read-object-file:
Always check the return value of `repo_read_object_file()`
|
|
There are a couple of places in Git's source code where the return value
is not checked. As a consequence, they are susceptible to segmentation
faults.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
