| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A handful of code paths have been corrected to check return values
from functions like curl_easy_duphandle(), deflateInit(), lseek(),
dup(), and strbuf_getline_lf(), resolving several Coverity warnings
about unchecked returns.
* js/coverity-unchecked-returns-fix:
bisect: handle dup() failure when redirecting stdout
bisect: check get_terms return at all call sites
bisect: check strbuf_getline_lf return when reading terms
transport-helper: warn when export-marks file cannot be finalized
transport-helper: check dup() return in get_exporter
compat/pread: check initial lseek for errors
last-modified: handle repo_parse_commit() failures
reftable tests: check reftable_table_init_ref_iterator() return
reftable/block: check deflateInit() return value
reftable: handle block-writer initialization errors
config: propagate launch_editor() failure in show_editor()
http: die on curl_easy_duphandle failure in get_active_slot
|
|
The 'git bisect' command has been taught a
'--reset-when-found[=<where>]' option that tells the command to
automatically run 'git bisect reset' to jump back to the original
state or to the found culprit.
* hn/bisect-reset-when-found:
bisect: add --reset-when-found to leave when done
bisect: let bisect_reset() optionally check out quietly
|
|
To capture the output of each verdict command, bisect_run()
temporarily redirects stdout to a temporary file via the classic
dup(1) / dup2() pair, restoring it afterwards. The return value of
dup(1) is not checked, however. When it fails, the saved descriptor
is -1, which is then passed to close() (the issue Coverity flags),
and the matching dup2() that is meant to restore stdout also fails,
leaving the process with stdout still pointing at the temporary file
for the remainder of the run.
Treat a failed dup(1) or dup2(..., 1) as a fatal error for this bisect
step: close the temporary file descriptor, report the error via
error_errno(), and break out of the loop so the existing cleanup path
handles the rest, just as on other failure paths in this function.
Reported by Coverity as CID 1508242 ("Improper use of negative
value").
Assisted-by: Opus 4.7
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Six callers of get_terms() silently discard its return value. When
get_terms fails (missing or truncated BISECT_TERMS file), the term
strings remain NULL or empty, causing confusing downstream
behavior: commands like "bisect next" or "bisect run" proceed with
empty term strings, producing nonsensical ref names (refs/bisect/
with no suffix) and misleading error messages.
Let's not discard the return value, but handle an error with the same
message `bisect_terms()` already uses when reading the terms failed.
Pointed out by Coverity.
There is one slight complication here: One caller _needs_ the return
value to indicate an error when the `BISECT_TERMS` file is absent, all
the other call sites are totally okay with a "missing" `BISECT_TERMS`
file. To address that, extend the function signature of `get_terms()` to
indicate which behavior the caller wants.
Assisted-by: Claude Opus 4.6
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_terms() in builtin/bisect.c and read_bisect_terms() in
bisect.c both read the BISECT_TERMS file but do not check the
strbuf_getline_lf() return values. If the file is truncated
(e.g., a partial write from a crash or disk-full condition),
strbuf_getline_lf returns EOF and the strbuf remains empty.
strbuf_detach then returns an empty string, and the term names
silently become "" instead of the expected "bad"/"good" or
custom terms.
In get_terms(), check for EOF and return -1 on truncation,
matching the existing -1 return for a missing file.
In read_bisect_terms(), die with a descriptive message when a
line cannot be read, consistent with the die_errno for a
non-ENOENT open failure in the same function. Unlike get_terms(),
read_bisect_terms() returns void and uses die() for all error
paths, so the die is the appropriate error handling here.
Pointed out by Coverity.
Assisted-by: Claude Opus 4.6
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a bisection finishes, "git bisect" reports the first bad commit
but leaves the session active until "git bisect reset" is run by hand.
Add a "--reset-when-found[=<where>]" option, accepted by both "git
bisect start" and "git bisect run", that resets as soon as the first
bad commit is found. The "original" value returns to the commit checked
out before "git bisect start", while "found" leaves the first bad commit
checked out; omitting the value defaults to "original".
Persist the selected target in a BISECT_RESET_WHEN_FOUND state file
and perform the reset quietly.
Let the internal first-bad result propagate to cmd_bisect(), which
performs the reset using the existing bad bisect ref after the
subcommand has returned. For "git bisect run", this means BISECT_RUN
has been printed and closed before cleanup, which also works on systems
that cannot unlink an open file.
Reject this option together with "--no-checkout", since that mode must
not check out either target.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "quiet" parameter to bisect_reset() that passes "--quiet" to the
checkout restoring the original HEAD, suppressing its progress and
branch-status output.
No caller sets the flag yet, so behavior is unchanged.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `refs_resolve_ref_unsafe()` is called to resolve HEAD, and returns
NULL (e.g., HEAD does not exist as a proper ref), the code falls back to
`repo_get_oid("HEAD")` to try to resolve the OID directly. If that
succeeds, execution continues with `head` still set to NULL.
Later, that variable is passed to `repo_get_oid()` and `starts_with()`,
both of which would dereference the NULL pointer.
A concrete trigger for `refs_resolve_ref_unsafe()` returning NULL while
`repo_get_oid()` succeeds could not be constructed against the ref
backends currently in the tree; the naive case (a symbolic HEAD pointing
at a nonexistent branch, in either the files or the reftable backend)
fails in both calls consistently and returns via the existing
`error(_("bad HEAD - I need a HEAD"))` path. Coverity, however, flags
the leftover use of `head` after the outer `if (!head)` on a formal
reading: `head` is still NULL at that point, and both `starts_with(head,
...)` and the second `repo_get_oid(..., head, ...)` in the else-branch
would dereference it if that state were ever reached.
Removing the outer check would risk regressing to a crash if a future
ref backend ever manages to hit the "returns NULL for HEAD but has a
valid OID for HEAD" state. Assigning the literal string "HEAD" as a
safe fallback documents the intent and satisfies the analyzer without
changing behavior in any code path we can currently reach.
Assisted-by: Claude Opus 4.7
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `lookup_commit_reference_by_name()` is called to find the first bad
commit, the result is passed to `repo_format_commit_message()`
immediately, which dereferences commit without checking for NULL.
However, the commit could be NULL, even though in practice this is
unlikely because `bisect_successful()` is only called after a successful
bisect run has identified the bad commit, but the ref could still become
dangling due to a concurrent gc or repository corruption.
Pointed out by Coverity.
Assisted-by: Claude Opus 4.6
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor `is_bare_repository()` to take in a repository parameter so
that we no longer depend on `the_repository`. Adjust callers
accordingly.
Furthermore, move the function outside of the declarations that are only
available when `USE_THE_REPOSITORY_VARIABLE` is set, as it no longer
depends on that variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Formatting object name in full hexadecimal form has been optimized
by using a new strbuf_add_oid_hex() helper function.
* rs/strbuf-add-oid-hex:
hex: add and use strbuf_add_oid_hex()
|
|
As bisect terms can be arbitrarily chosen, they have been quoted in some
status messages, and in even more by translators.
To make the role of bisect terms more clear, including in translations,
and for consistency, 'enquote' all occurrences of bisect terms in status
messages.
Signed-off-by: Jonas Rebmann <kernel@schlaraffenlan.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Alternate bisect terms are helpful when the terms "good" and "bad" are
confusing such as when bisecting for the resolution of an issue (the
first good commit) rather than the introduction of a regression.
These terms must be used when marking a commit (e.g. `git bisect new`),
they will be used in reference names (e.g. refs/bisect/new) and they are
used in parts of git's log output such as "<sha> was both old and new"
in git bisect skip's output.
However, hardcoded "good"/"bad" terms are still used in a few status
messages and can cause confusion about the status of the bisect such as:
$ git bisect old
[sha] is the first new commit
or about the required action such as:
status: waiting for bad commit, 1 good commit known
$ git bisect bad
error: Invalid command: you're currently in a new/old bisect
fatal: unknown command: 'bad'
This commit updates all remaining output messages which use hardcoded
"good" and "bad" terms to use the selected terms consistently across the
bisect output and adds tests.
Signed-off-by: Jonas Rebmann <kernel@schlaraffenlan.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function for adding the full hexadecimal hash value of an object
ID to a strbuf. It's thread-safe and slightly more efficient than using
strbuf_addstr() with oid_to_hex() because it doesn't have to determine
the length of the string or copy it from the intermediate static buffer.
Add and apply a semantic patch to use it throughout the code base.
I get a tiny speedup for git log showing a single hash per commit:
Benchmark 1: ./git_main log --format=%H
Time (mean ± σ): 91.2 ms ± 0.7 ms [User: 51.9 ms, System: 38.6 ms]
Range (min … max): 89.8 ms … 92.6 ms 31 runs
Benchmark 2: ./git log --format=%H
Time (mean ± σ): 90.5 ms ± 0.7 ms [User: 51.0 ms, System: 38.8 ms]
Range (min … max): 89.2 ms … 92.3 ms 32 runs
Summary
./git log --format=%H ran
1.01 ± 0.01 times faster than ./git_main log --format=%H
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace calls to `refs_for_each_glob_ref_in()` with the newly introduced
`refs_for_each_ref_ext()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some ref backend storage can hold not just the object name of an
annotated tag, but the object name of the object the tag points at.
The code to handle this information has been streamlined.
* ps/ref-peeled-tags:
t7004: do not chdir around in the main process
ref-filter: fix stale parsed objects
ref-filter: parse objects on demand
ref-filter: detect broken tags when dereferencing them
refs: don't store peeled object IDs for invalid tags
object: add flag to `peel_object()` to verify object type
refs: drop infrastructure to peel via iterators
refs: drop `current_ref_iter` hack
builtin/show-ref: convert to use `reference_get_peeled_oid()`
ref-filter: propagate peeled object ID
upload-pack: convert to use `reference_get_peeled_oid()`
refs: expose peeled object ID via the iterator
refs: refactor reference status flags
refs: fully reset `struct ref_iterator::ref` on iteration
refs: introduce `.ref` field for the base iterator
refs: introduce wrapper struct for `each_ref_fn`
|
|
The help text and manual page of "git bisect" command have been
made consistent with each other.
* rz/t0450-bisect-doc-update:
bisect: update usage and docs to match each other
|
|
The `each_ref_fn` callback function type is used across our code base
for several different functions that iterate through reference. There's
a bunch of callbacks implementing this type, which makes any changes to
the callback signature extremely noisy. An example of the required churn
is e8207717f1 (refs: add referent to each_ref_fn, 2024-08-09): adding a
single argument required us to change 48 files.
It was already proposed back then [1] that we might want to introduce a
wrapper structure to alleviate the pain going forward. While this of
course requires the same kind of global refactoring as just introducing
a new parameter, it at least allows us to more change the callback type
afterwards by just extending the wrapper structure.
One counterargument to this refactoring is that it makes the structure
more opaque. While it is obvious which callsites need to be fixed up
when we change the function type, it's not obvious anymore once we use
a structure. That being said, we only have a handful of sites that
actually need to populate this wrapper structure: our ref backends,
"refs/iterator.c" as well as very few sites that invoke the iterator
callback functions directly.
Introduce this wrapper structure so that we can adapt the iterator
interfaces more readily.
[1]: <ZmarVcF5JjsZx0dl@tanuki>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the usage string of `git bisect` and documentation to match each
other. While at it, also:
1. Move the synopsis of `git bisect` subcommands to the synopsis
section, so that the test `t0450-txt-doc-vs-help.sh` can pass.
2. Document the `git bisect next` subcommand, which exists in the code
but is missing from the documentation.
See also: [1].
[1]: https://lore.kernel.org/git/3DA38465-7636-4EEF-B074-53E4628F5355@gmail.com/
Suggested-by: Ben Knoble <ben.knoble@gmail.com>
Signed-off-by: Ruoyu Zhong <zhongruoyu@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As documented in git-bisect(1), `git bisect help` should display usage
information. However, since the migration of `git bisect` to a full
builtin command in 73fce29427 (Turn `git bisect` into a full built-in,
2022-11-10), this behavior was broken. Running `git bisect help` would,
instead of showing usage, either fail silently if already in a bisect
session, or otherwise trigger an interactive autostart prompt asking "Do
you want me to do it for you [Y/n]?".
Similarly, since df63421be9 (bisect--helper: handle states directly,
2022-11-10), running invalid subcommands like `git bisect foobar` also
led to the same behavior.
This occurred because `help` and other unrecognized subcommands were
being unconditionally passed to `bisect_state`, which then called
`bisect_autostart`, triggering the interactive prompt.
Fix this by:
1. Adding explicit handling for the `help` subcommand to show usage;
2. Validating that unrecognized commands are actually valid state
commands before calling `bisect_state`;
3. Showing an error with usage for truly invalid commands.
This ensures that `git bisect help` displays the usage as documented,
and invalid commands fail cleanly without entering interactive mode.
Alternate terms are still handled correctly through
`check_and_set_terms`.
Signed-off-by: Ruoyu Zhong <zhongruoyu@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 9b1cb5070f (builtin: add a repository parameter for builtin
functions, 2024-09-13) the repository was passed down to all builtin
commands. This allowed the repository to be passed down to lower layers
without depending on the global `the_repository` variable.
Continue this work by also passing down the repository parameter from
the command to sub-commands. This will help pass down the repository to
other subsystems and cleanup usage of global variables like
'the_repository' and 'the_hash_algo'.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our error reporting routines append a trailing newline, and the strings
we pass to them should not include them (otherwise we get an extra blank
line after the message).
These cases were all found by looking at the results of:
git grep -P '[^_](error|error_errno|warning|die|die_errno)\(.*\\n"[,)]' '*.c'
Note that we _do_ sometimes include a newline in the middle of such
messages, to create multiline output (hence our grep matching "," or ")"
after we see the newline, so we know we're at the end of the string).
It's possible that one or more of these cases could intentionally be
including a blank line at the end, but having looked at them all
manually, I think these are all just mistakes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a parameter to each_ref_fn so that callers to the ref APIs
that use this function as a callback can have acess to the
unresolved value of a symbolic ref.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to enable `-Wwrite-strings`, which changes the type of
string constants to `const char[]`. Fix various sites where we assign
such constants to non-const variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
|
|
We're inconsistently writing BISECT_EXPECTED_REV both via the filesystem
and via the refdb, which violates the newly established rules for how
special refs must be treated. This works alright in practice with the
reffiles reference backend, but will cause bugs once we gain additional
backends.
Fix this issue and consistently write BISECT_EXPECTED_REV via the refdb
so that it is no longer a special ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually "bisect reset" cleans up any refs/bisect/ refs, along with
meta-files like .git/BISECT_LOG. But it only does so after deciding that
a bisection is active, which it does by reading BISECT_START. This is
usually fine, but it's possible to get into a confusing state if the
BISECT_START file is gone, but other cruft is left (this might be due to
a bug, or a system crash, etc).
And since "bisect reset" refuses to do anything in this state, the user
has no easy way to clean up the leftover cruft. While another "bisect
start" would clear the state, in the interim it can be annoying, as
other tools (like our bash prompt code) think we are bisecting, and
for-each-ref output may be polluted with refs/bisect/ entries.
Further adding to the confusion is that running "bisect reset $some_ref"
skips the BISECT_START check. So it never realizes that there's no
bisection active and does the cleanup anyway!
So let's just make sure we always do the cleanup, whether we looked at
BISECT_START or not. If the user doesn't give us a commit to reset to,
we'll still say "We are not bisecting" and skip the call to "git
checkout".
Reported-by: Janik Haag <janik@aq0.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of the `git bisect run` command syntax at the beginning
of the manpage is `git bisect run <cmd>...`, which isn't quite clear
about what `<cmd>` is or what the `...` mean; one could think that it is
the whole (quoted) command line with all arguments in a single string,
or that it supports multiple commands, or that it doesn't accept
commands with arguments at all.
Change to `git bisect run <cmd> [<arg>...]` to clarify the syntax,
in both the manpage and the `git bisect -h` command output.
Additionally, change `--term-{new,bad}` et al to `--term-(new|bad)`
for consistency with the synopsis syntax conventions.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
|
