| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The application of the edited patch in 'git add -e' has been
refactored to use the internal apply API directly, avoiding the need
to spawn a 'git apply' subprocess.
* gr/add-e-use-apply-api:
builtin/add.c: replace run_command() with direct apply_all_patches() call
|
|
The 'git receive-pack' command has been updated to use a new ODB
transaction interface for writing incoming packfiles, making it more
backend-agnostic.
* jt/receive-pack-pluggable-writes:
odb/transaction: add transaction interface to write packfiles
odb: return temporary ODB source when set
builtin/receive-pack: explicitly pass packfile fd
builtin/receive-pack: report unpack errors via strbuf
builtin/receive-pack: lift global state out of unpack()
builtin/receive-pack: read unpack limit config lazily
builtin/receive-pack: pass shallow file explicitly
odb/transaction: add transaction finalize interface
builtin/receive-pack: properly clean up keep files
|
|
When committing an ODB transaction via `odb_transaction_commit()`, the
staged objects are made visible and the underlying transaction is freed
at the same time. Coupling these two steps does not leave room for any
post-commit transaction operations to be introduced though. Such a
capability is useful if an ODB transaction backend needs to hold on to
lockfiles after transaction commit until references are updated, as is
the case with the existing "files" backend in git-receive-pack(1).
Stop freeing the transaction in `odb_transaction_commit()` and introduce
`odb_transaction_finalize()` to explicitly clean up the transaction
accordingly. Note that the finalize interface also provides an optional
callback for any backend-specific deferred cleanup. In a subsequent
commit, the "files" transaction backend will use this to remove ".keep"
files generated for packfiles received via git-receive-pack(1) after
references have been updated. In preparation for this, the
`odb_transaction_finalize()` call site in git-receive-pack(1) is made
after the reference updates are finished.
All other callers commit a transaction and immediately finalize it
without any work happening in between those two operations.
Consequently, they cannot meaningfully recover in case either of them
would fail, and spelling out these two separate steps with proper error
handling would be quite repetitive and pointless. Introduce a helper
`odb_transaction_commit_and_finalize_or_die()` for those call sites and
update them accordingly.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a conflicted merge, rebase, or cherry-pick, 'git add -u' is a
handy way to add modified paths to the index. However, '-u'
indiscriminately adds all modified tracked paths, including unmerged
paths that may still contain unresolved conflict markers. It also
adds tracked files modified in the worktree that are not involved in
the ongoing merge.
The latter is not a huge problem for "git rebase", which refuses to
start with any local changes, but is a problem for "git merge",
which is often run with local changes in maintainer workflows.
Introduce 'git add --resolved' to add only unmerged paths, limited
by an optional pathspec, where no conflict markers remain in the
working tree.
Before modifying the index, scan unmerged regular files for leftover
conflict markers using a new helper, has_conflict_markers(), defined
in merge-ll.c in terms of the is_conflict_marker_line() helper we
introduced earlier. If any unmerged path still contains conflict
markers, show an error listing the conflicted paths and abort
without updating the index. Otherwise, add these unmerged paths
that do not have conflict markers to the index.
Note that unmerged paths without conflict markers (such as binary
files and deletions) are added as resolved using add_file_to_index()
and remove_file_from_index_with_flags(). Tracked files that were
not in a conflicted state are ignored by '--resolved'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user runs "git add -e", the diff of the working tree changes
is written to a temporary file, opened in an editor, and then applied
back to the index. The application step is done by spawning a child
process running "git apply --recount --cached <file>", which is an
unnecessary subprocess since the apply machinery is available as a
native C API.
Replace the run_command() call with a direct call to apply_all_patches()
using an initialized apply_state with the cached and recount options set
appropriately. This avoids the overhead of forking a subprocess, keeps
the operation within the same process, and makes the intent of the code
clearer to the reader.
Remove the now-unused includes of "run-command.h" and "strvec.h" since
no other code in this file requires them after this change.
Signed-off-by: Gatla Vishweshwar Reddy <gatlavishweshwarreddy26@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The temporary directory used by git-receive-pack(1) to write objects is
managed slightly differently than how it is done via ODB transactions:
- The temporary directory is eagerly created upfront, instead of
waiting for the first object write.
- The prefix name of the temporary directory is "incoming" instead of
"bulk-fsync".
In a subsequent commit, git-receive-pack(1) will use ODB transactions
instead of `tmp_objdir` directly. To provide a means to configure the
same transaction behavior, introduce `enum odb_transaction_flags` and
the ODB_TRANSACTION_RECEIVE flag intended as a signal for ODB
transactions using the "files" backend to be set up for
git-receive-pack(1). Transaction call sites are updated accordingly to
provide the required flag parameter.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `odb_transaction_begin()` is invoked, the function returns the
transaction pointer directly. There is no way for the backend to
signal that it failed to set up its state, such as when creating the
temporary object directory backing the transaction.
In a subsequent commit, git-receive-pack(1) starts using ODB
transactions and needs to be able to report such failures rather
than silently ignore them. Refactor `odb_transaction_begin()` to
return an int error code and write the resulting transaction into an
out parameter. Also introduce `odb_transaction_begin_or_die()` as a
convenience for callsites that do not need to handle errors
explicitly.
Note that `odb_transaction_begin()` now returns an error when the ODB
already has an inflight transaction pending. ODB transaction call sites
that may encounter an inflight transaction are updated to explicitly
handle this case.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current ODB transaction interface is colocated with other ODB
interfaces in "odb.{c,h}". Subsequent commits will expand `struct
odb_transaction` to support write operations on the transaction
directly. To keep things organized and prevent "odb.{c,h}" from becoming
more unwieldy, split out `struct odb_transaction` into a separate
header.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git history" learned the "split" subcommand.
* ps/history-split:
builtin/history: implement "split" subcommand
builtin/history: split out extended function to create commits
cache-tree: allow writing in-memory index as tree
add-patch: allow disabling editing of hunks
add-patch: add support for in-memory index patching
add-patch: remove dependency on "add-interactive" subsystem
add-patch: split out `struct interactive_options`
add-patch: split out header from "add-interactive.h"
|
|
"git add <submodule>" has been taught to honor
submodule.<name>.ignore that is set to "all" (and requires "git add
-f" to override it).
* cs/add-skip-submodule-ignore-all:
Documentation: update add --force option + ignore=all config
tests: fix existing tests when add an ignore=all submodule
tests: t2206-add-submodule-ignored: ignore=all and add --force tests
read-cache: submodule add need --force given ignore=all configuration
read-cache: update add_files_to_cache take param ignored_too
|
|
The "add-patch" mode allows the user to edit hunks to apply custom
changes. This is incompatible with a new `git history split` command
that we're about to introduce in a subsequent commit, so we need a way
to disable this mode.
Add a new flag to disable editing hunks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `struct add_p_opt` is reused both by our infra for "git add -p" and
"git add -i". Users of `run_add_i()` for example are expected to pass
`struct add_p_opt`. This is somewhat confusing and raises the question
of which options apply to what part of the stack.
But things are even more confusing than that: while callers are expected
to pass in `struct add_p_opt`, these options ultimately get used to
initialize a `struct add_i_state` that is used by both subsystems. So we
are basically going full circle here.
Refactor the code and split out a new `struct interactive_options` that
hosts common options used by both. These options are then applied to a
`struct interactive_config` that hosts common configuration.
This refactoring doesn't yet fully detangle the two subsystems from one
another, as we still end up calling `init_add_i_state()` in the "git add
-p" subsystem. This will be fixed in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the interactive add, reset, stash or checkout machinery,
we do not have the option of reworking with a file when selecting
hunks, because the session automatically advances to the next file
or ends if we have just one file.
Introduce the flag `--auto-advance` which auto advances by default,
when interactively selecting patches with the '--patch' option.
However, the `--no-auto-advance` option does not auto advance, thereby
allowing users the option to rework with files.
Signed-off-by: Abraham Samuel Adekunle <abrahamadekunle50@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ignored_too parameter is added to the function
add_files_to_cache for usage of explicit updating the index for the updated
submodule using the explicit patchspec to the submodule.
Signed-off-by: Claus Schneider(Eficode) <claus.schneider@eficode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The work to build on the bulk-checkin infrastructure to create many
objects at once in a transaction and to abstract it into the
generic object layer continues.
* jt/odb-transaction:
odb: add transaction interface
object-file: update naming from bulk-checkin
object-file: relocate ODB transaction code
bulk-checkin: drop flush_odb_transaction()
builtin/update-index: end ODB transaction when --verbose is specified
bulk-checkin: remove ODB transaction nesting
|
|
Some places in the code confused a variable that is *not* a boolean
to enable color but is an enum that records what the user requested
to do about color. A couple of bugs of this sort have been fixed,
while the code has been cleaned up to prevent similar bugs in the
future.
* jk/color-variable-fixes:
config: store want_color() result in a separate bool
add-interactive: retain colorbool values longer
color: return bool from want_color()
color: use git_colorbool enum type to store colorbools
pretty: use format_commit_context.auto_color as colorbool
diff: stop passing ecbdata->use_color as boolean
diff: pass o->use_color directly to fill_metainfo()
diff: don't use diff_options.use_color as a strict bool
diff: simplify color_moved check when flushing
grep: don't treat grep_opt.color as a strict bool
color: return enum from git_config_colorbool()
color: use GIT_COLOR_* instead of numeric constants
|
|
Long ago Git's decision to show color for a subsytem was stored in a
tri-state variable: it could be true (1), false (0), or unknown (-1).
But since daa0c3d971 (color: delay auto-color decision until point of
use, 2011-08-17) we want to carry around a new state, "auto", which
bases the decision on the tty-ness of stdout (rather than collapsing
that "auto" state to a true/false immediately).
That commit introduced a set of GIT_COLOR_* defines to represent each
state: UNKNOWN, ALWAYS, NEVER, and AUTO. But it only used the AUTO
value, and left alone code using bare 0/1/-1 values. And of course since
then we've grown many new spots that use those bare values.
Let's switch all of these to use the named constants. That should make
the code a bit easier to read, as it is more obvious that we're
representing a color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Transactions are managed via the {begin,end}_odb_transaction() function
in the object-file subsystem and its implementation is specific to the
files object source. Introduce odb_transaction_{begin,commit}() in the
odb subsystem to provide an eventual object source agnostic means to
manage transactions.
Update call sites to instead manage transactions through the odb
subsystem. Also rename {begin,end}_odb_transaction() functions to
object_file_transaction_{begin,commit}() to clarify the object source it
supports.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bulk-checkin subsystem provides various functions to manage ODB
transactions. Apart from {begin,end}_odb_transaction(), these functions
are only used by the object-file subsystem to manage aspects of a
transaction implementation specific to the files object source.
Relocate all the transaction code in bulk-checkin to object-file. This
simplifies the exposed transaction interface by reducing it to only
{begin,end}_odb_transaction(). Function and type names are adjusted in
the subsequent commit to better fit the new location.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Object database transactions in the bulk-checkin subsystem rely on
global state to track transaction status. Stop relying on global state
and instead store the transaction in the `struct object_database`.
Functions that operate on transactions are updated to now wire
transaction state.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add/etc -p" now honor the diff.context configuration variable,
and also they learn to honor the -U<n> command-line option.
* lm/add-p-context:
add-patch: add diff.context command line overrides
add-patch: respect diff.context configuration
t: use test_config in t4055
t: use test_grep in t3701 and t4055
|
|
This patch compliments the previous commit, where builtins that use
add-patch infrastructure now respect diff.context and
diff.interHunkContext file configurations.
In particular, this patch helps users who don't want to set persistent
context configurations or just want a way to override them on a one-time
basis, by allowing the relevant builtins to accept corresponding command
line options that override the file configurations.
This mimics commands such as diff and log, which allow for both context
file configuration and command line overrides.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "config.c" we host both the business logic to read and write config
files as well as the logic to parse specific Git-related variables. On
the one hand this is mixing concerns, but even more importantly it means
that we cannot easily remove the dependency on `the_repository` in our
config parsing logic.
Move the logic into "environment.c". This file is a grab bag of all
kinds of global state already, so it is quite a good fit. Furthermore,
it also hosts most of the global variables that we're parsing the config
values into, making this an even better fit.
Note that there is one hidden change: in `parse_fsync_components()` we
use an `int` to iterate through `ARRAY_SIZE(fsync_component_names)`. But
as -Wsign-compare warnings are enabled in this file this causes a
compiler warning. The issue is fixed by using a `size_t` instead.
This change allows us to drop the `USE_THE_REPOSITORY_VARIABLE`
declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git apply" and "git add -i/-p" code paths no longer unnecessarily
expand sparse-index while working.
* ds/sparse-apply-add-p:
p2000: add performance test for patch-mode commands
reset: integrate sparse index with --patch
git add: make -p/-i aware of sparse index
apply: integrate with the sparse index
|
|
It is slow to expand a sparse index in-memory due to parsing of trees.
We aim to minimize that performance cost when possible. 'git add -p'
uses 'git apply' child processes to modify the index, but still there
are some expansions that occur.
It turns out that control flows out of cmd_add() in the interactive
cases before the lines that confirm that the builtin is integrated with
the sparse index.
Moving that integration point earlier in cmd_add() allows 'git add -i'
and 'git add -p' to operate without expanding a sparse index to a full
one.
Add test cases that confirm that these interactive add options work with
the sparse index.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we already teach the `repo_config()` in "f29f1990b5
(config: teach repo_config to allow `repo` to be NULL, 2025-03-08)"
to allow `repo` to be NULL, no need to check if `repo` is NULL
before calling `repo_config()`.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a bunch of loops which iterate up to an unsigned boundary using
a signed index, which generates warnigs because we compare a signed and
unsigned value in the loop condition. Address these sites for trivial
cases and enable `-Wsign-compare` warnings for these code units.
This patch only adapts those code units where we can drop the
`DISABLE_SIGN_COMPARE_WARNINGS` macro in the same step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current code in run_builtin() passes in a repository to the builtin
based on whether cmd_struct's option flag has RUN_SETUP.
This is incorrect, however, since some builtins that only have
RUN_SETUP_GENTLY can potentially take a repository.
setup_git_directory_gently() tells us whether or not a command is being
run inside of a repository.
Use the output of setup_git_directory_gently() to help determine whether
or not there is a repository to pass to the builtin. If not, then we
just pass NULL.
As part of this patch, we need to modify add to check for a NULL repo
before calling repo_git_config(), since add -h can be run outside of a
repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the repository variable available in the builtin function as an
argument, pass this down into helper functions instead of using the
global the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration variable stopped doing anything (other than
announcing itself as a variable that does not do anything useful,
when it is used) in Git 2.40.
At this point, it is not even worth giving the warning, which was
meant to be a way to help users notice they are carrying unused
cruft in their configuration files and give them a chance to
clean-up.
Let's remove the warning and documentation for it, and truly stop
paying attention to it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Documentation/config/add.txt | 6 ------
builtin/add.c | 6 +-----
t/t3701-add-interactive.sh | 15 ---------------
3 files changed, 1 insertion(+), 26 deletions(-)
|
|
The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* ps/the-index-is-no-more:
repository: drop `initialize_the_repository()`
repository: drop `the_index` variable
builtin/clone: stop using `the_index`
repository: initialize index in `repo_init()`
builtin: stop using `the_index`
t/helper: stop using `the_index`
|
|
Plug a leak we have since 5a76aff1a6 (add: convert to use
parse_pathspec, 2013-07-14).
This leak can be triggered with:
$ git add -p anything
Fixing this leak allows us to mark as leak-free the following tests:
+ t3701-add-interactive.sh
+ t7514-commit-patch.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert builtins to use `the_repository->index` instead of `the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -u <pathspec>" and "git commit [-i] <pathspec>" did not
diagnose a pathspec element that did not match any files in certain
situations, unlike "git add <pathspec>" did.
* gt/add-u-commit-i-pathspec-check:
builtin/add: error out when passing untracked path with -u
builtin/commit: error out when passing untracked path with -i
revision: optionally record matches with pathspec elements
|
|
Use advice_if_enabled() API to rewrite a simple pattern to
call advise() after checking advice_enabled().
* rj/use-adv-if-enabled:
add: use advise_if_enabled for ADVICE_ADD_EMBEDDED_REPO
add: use advise_if_enabled for ADVICE_ADD_EMPTY_PATHSPEC
add: use advise_if_enabled for ADVICE_ADD_IGNORED_FILE
|
|
When passing untracked path with -u option, it silently succeeds.
There is no error message and the exit code is zero. This is
inconsistent with other instances of git commands where the expected
argument is a known path. In those other instances, we error out when
the path is not known.
Fix this by passing a character array to add_files_to_cache() to
collect the pathspec matching information and report the error if a
pathspec does not match any cache entry. Also add a testcase to cover
this scenario.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike "git add" and other end-user facing commands, where it is
diagnosed as an error to give a pathspec with an element that does
not match any path, the diff machinery does not care if some
elements of the pathspec do not match. Given that the diff
machinery is heavily used in pathspec-limited "git log" machinery,
and it is common for a path to come and go while traversing the
project history, this is usually a good thing.
However, in some cases we would want to know if all the pathspec
elements matched. For example, "git add -u <pathspec>" internally
uses the machinery used by "git diff-files" to decide contents from
what paths to add to the index, and as an end-user facing command,
"git add -u" would want to report an unmatched pathspec element.
Add a new .ps_matched member next to the .prune_data member in
"struct rev_info" so that we can optionally keep track of the use of
.prune_data pathspec elements that can be inspected by the caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By following a similar reasoning as in previous commits, there are no
reason why we should not use the advise_if_enabled() API to display the
ADVICE_ADD_EMBEDDED_REPO advice.
This advice was introduced in 532139940c (add: warn when adding an
embedded repository, 2017-06-14). Some tests were included in the
commit, but none is testing this advice. Which, note, we only want to
display once per run.
So, use the advise_if_enabled() machinery to show the
ADVICE_ADD_EMBEDDED_REPO advice and include a test to notice any
possible breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 93b0d86aaf (git-add: error out when given no arguments.,
2006-12-20) we display a message when no arguments are given to "git
add".
Part of that message was converted to advice in bf66db37f1 (add: use
advise function to display hints, 2020-01-07).
Following the same line of reasoning as in the previous commit, it is
sensible to use advise_if_enabled() here.
Therefore, use advise_if_enabled() in builtin/add.c to show the
ADVICE_ADD_EMPTY_PATHSPEC advice, and don't bother checking there the
visibility of the advice or displaying the instruction on how to disable
it.
Also add a test for these messages, in order to detect a possible
change in them.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since b3b18d1621 (advice: revamp advise API, 2020-03-02), we can use
advise_if_enabled() to display an advice. This API encapsulates three
actions:
1.- checking the visibility of the advice
2.- displaying the advice when appropriate
3.- displaying instructions on how to disable the advice, when
appropriate
The code we have in builtin/add.c to display the ADVICE_ADD_IGNORED_FILE
advice, is doing these three things. However, the instructions
displayed on how to disable the hint are not shown in the normalized way
that advise_if_enabled() introduced. This may cause distraction.
There is no reason not to use the new API here. On the contrary, by
using it we gain simplicity in the code and avoid possible distractions.
For these reasons, use the newer advise_if_enabled() machinery to show
the ADVICE_ADD_IGNORED_FILE advice, and don't bother checking the
visibility or displaying the instruction on how to disable the advice.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up practice.
* eg/add-uflags:
add: use unsigned type for collection of bits
|
|
The 'refresh' function in 'builtin/add.c' declares 'flags' as
signed, and passes it as an argument to the 'refresh_index'
function, which though expects an unsigned value.
Since in this case 'flags' represents a bag of bits, whose MSB is
not used in special ways, change the type of 'flags' to unsigned.
Signed-off-by: Eugenio Gigante <giganteeugenio2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow users to limit or exclude files based on file attributes
during git-add and git-stash.
For example, the chromium project would like to use
$ git add . ':(exclude,attr:submodule)'
as submodules are managed by an external tool, forbidding end users
to record changes with "git add". Allowing "git add" to often
records changes that users do not want in their commits.
This commit does not change any attr magic implementation. It is
only adding attr as an allowed pathspec in git-add and git-stash,
which was previously blocked by GUARD_PATHSPEC and a pathspec mask
in parse_pathspec()).
However, we fix a bug in prefix_magic() where attr values were
unintentionally removed. This was triggerable when parse_pathspec()
is called with PATHSPEC_PREFIX_ORIGIN as a flag, which was the case
for git-stash (Bug originally filed here [*])
Furthermore, while other commands hit this code path it did not
result in unexpected behavior because this bug only impacts the
pathspec->items->original field which is NOT used to filter
paths. However, git-stash does use pathspec->items->original when
building args used to call other git commands. (See add_pathspecs()
usage and implementation in stash.c)
It is possible that when the attr pathspec feature was first added
in b0db704652 (pathspec: allow querying for attributes, 2017-03-13),
"PATHSPEC_ATTR" was just unintentionally left out of a few
GUARD_PATHSPEC() invocations.
Later, to get a more user-friendly error message when attr was used
with git-add, PATHSPEC_ATTR was added as a mask to git-add's
invocation of parse_pathspec() 84d938b732 (add: do not accept
pathspec magic 'attr', 2018-09-18). However, this user-friendly
error message was never added for git-stash.
[Reference]
* https://lore.kernel.org/git/CAMmZTi-0QKtj7Q=sbC5qhipGsQxJFOY-Qkk1jfkRYwfF5FcUVg@mail.gmail.com/)
Signed-off-by: Joanna Wang <jojwang@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message updates.
* ni/die-message-fix-for-git-add:
builtin/add.c: clean up die() messages
|
|
As described in the CodingGuidelines document, a single line message
given to die() and its friends should not capitalize its first word,
and should not add full-stop at the end.
Signed-off-by: Naomi Ibe <naomi.ibeh69@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
