| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Do not link to git-hook(1) from the config options when we already are
in that doc.
This implementation is similar to the updates to git-init(1) and
git-commit(1), implemented in [1] and [2], respectively.
† 1: e7b3a768 (doc: git-init: rework config item init.templateDir,
2024-03-10)
† 2: 819fdd6e (doc: convert git commit config to new format, 2025-01-15)
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow -1 as a value for hook.jobs, hook.<event>.jobs, and the -j
CLI flag to mean "use as many jobs as there are CPU cores", matching
the convention used by fetch.parallel and other Git subsystems.
The value is resolved to online_cpus() at parse time so the rest
of the code always works with a positive resolved count.
Other non-positive values (0, -2, etc) are rejected with a warning
(config) or die (CLI).
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a hook.<event>.enabled config key that disables all hooks for
a given event, when set to false, acting as a high-level switch
above the existing per-hook hook.<friendly-name>.enabled.
Event-disabled hooks are shown in "git hook list" with an
"event-disabled" tab-separated prefix before the name:
$ git hook list test-hook
event-disabled hook-1
event-disabled hook-2
With --show-scope:
$ git hook list --show-scope test-hook
local event-disabled hook-1
When a hook is both per-hook disabled and event-disabled, only
"event-disabled" is shown: the event-level switch is the more
relevant piece of information, and the per-hook "disabled" status
will surface once the event is re-enabled.
Using an event name as a friendly-name (e.g. hook.<event>.enabled)
can cause ambiguity, so a fatal error is issued when using a known
event name and a warning is issued for unknown event name, since
a collision cannot be detected with certainty for unknown events.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a hook.<event>.jobs count config that allows users to override the
global hook.jobs setting for specific hook events.
This allows finer-grained control over parallelism on a per-event basis.
For example, to run `post-receive` hooks with up to 4 parallel jobs
while keeping other events at their global default:
[hook]
post-receive.jobs = 4
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several hooks are known to be inherently non-parallelizable, so initialize
them with RUN_HOOKS_OPT_INIT_FORCE_SERIAL. This pins jobs=1 and overrides
any hook.jobs or runtime -j flags.
These hooks are:
applypatch-msg, pre-commit, prepare-commit-msg, commit-msg, post-commit,
post-checkout, and push-to-checkout.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
pre-push is the only hook that keeps stdout and stderr separate (for
backwards compatibility with git-lfs and potentially other users). This
prevents parallelizing it because run-command needs stdout_to_stderr=1
to buffer and de-interleave parallel outputs.
Since we now default to jobs=1, backwards compatibility is maintained
without needing any extension or extra config: when no parallelism is
requested, pre-push behaves exactly as before.
When the user explicitly opts into parallelism via hook.jobs > 1,
hook.<event>.jobs > 1, or -jN, they accept the changed output behavior.
Document this and let get_hook_jobs() set stdout_to_stderr=1 automatically
when jobs > 1, removing the need for any extension infrastructure.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hooks always run in sequential order due to the hardcoded jobs == 1
passed to run_process_parallel(). Remove that hardcoding to allow
users to run hooks in parallel (opt-in).
Users need to decide which hooks to run in parallel, by specifying
"parallel = true" in the config, because Git cannot know if their
specific hooks are safe to run or not in parallel (for e.g. two hooks
might write to the same file or call the same program).
Some hooks are unsafe to run in parallel by design: these will marked
in the next commit using RUN_HOOKS_OPT_INIT_FORCE_SERIAL.
The hook.jobs config specifies the default number of jobs applied to all
hooks which have parallelism enabled.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The hook.jobs config is a global way to set hook parallelization for
all hooks, in the sense that it is not per-event nor per-hook.
Finer-grained configs will be added in later commits which can override
it, for e.g. via a per-event type job options. Next commits will also
add to this item's documentation.
Parse hook.jobs config key in hook_config_lookup_all() and store its
value in hook_all_config_cb.jobs, then transfer it into r->jobs after
the config pass completes.
This is mostly plumbing and the cached value is not yet used.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `name` and `friendly-name` is being used. Standardize on
`friendly-name` for consistency since name is rather generic,
even when used in the hooks namespace.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the ability for empty events to clear previously set multivalue
variables, so the newly added "hook.*.event" behave like the other
multivalued keys.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hooks specified via configs are always enabled, however users
might want to disable them without removing from the config,
like locally disabling a global hook.
Add a hook.<name>.enabled config which defaults to true and
can be optionally set for each configured hook.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the hook.[hc] library to parse configs to populate the list of
hooks to run for a given event.
Multiple commands can be specified for a given hook by providing
"hook.<friendly-name>.command = <path-to-hook>" and
"hook.<friendly-name>.event = <hook-event>" lines.
Hooks will be started in config order of the "hook.<name>.event"
lines and will be run sequentially (.jobs == 1) like before.
Running the hooks in parallel will be enabled in a future patch.
The "traditional" hook from the hookdir is run last, if present.
A strmap cache is added to struct repository to avoid re-reading
the configs on each rook run. This is useful for hooks like the
ref-transaction which gets executed multiple times per process.
Examples:
$ git config --get-regexp "^hook\."
hook.bar.command=~/bar.sh
hook.bar.event=pre-commit
# Will run ~/bar.sh, then .git/hooks/pre-commit
$ git hook run pre-commit
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
