| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow the directory in which reference backends store their data to
be specified.
* kn/ref-location:
refs: add GIT_REFERENCE_BACKEND to specify reference backend
refs: allow reference location in refstorage config
refs: receive and use the reference storage payload
refs: move out stub modification to generic layer
refs: extract out `refs_create_refdir_stubs()`
setup: don't modify repo in `create_reference_database()`
|
|
The 'extensions.refStorage' config is used to specify the reference
backend for a given repository. Both the 'files' and 'reftable' backends
utilize the $GIT_DIR as the reference folder by default in
`get_main_ref_store()`.
Since the reference backends are pluggable, this means that they could
work with out-of-tree reference directories too. Extend the 'refStorage'
config to also support taking an URI input, where users can specify the
reference backend and the location.
Add the required changes to obtain and propagate this value to the
individual backends. Add the necessary documentation and tests.
Traditionally, for linked worktrees, references were stored in the
'$GIT_DIR/worktrees/<wt_id>' path. But when using an alternate reference
storage path, it doesn't make sense to store the main worktree
references in the new path, and the linked worktree references in the
$GIT_DIR. So, let's store linked worktree references in
'$ALTERNATE_REFERENCE_DIR/worktrees/<wt_id>'. To do this, create the
necessary files and folders while also adding stubs in the $GIT_DIR path
to ensure that it is still considered a Git directory.
Ideally, we would want to pass in a `struct worktree *` to individual
backends, instead of passing the `gitdir`. This allows them to handle
worktree specific logic. Currently, that is not possible since the
worktree code is:
- Tied to using the global `the_repository` variable.
- Is not setup before the reference database during initialization of
the repository.
Add a TODO in 'refs.c' to ensure we can eventually make that change.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Manually running
"git config submodule.<name>.gitdir .git/modules/<name>"
for each submodule can be impractical, so add a migration command to
submodule--helper to automatically create configs for all submodules
as required by extensions.submodulePathConfig.
The command calls create_default_gitdir_config() which validates the
gitdir paths before adding the configs.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new config `init.defaultSubmodulePathConfig` which allows
enabling `extensions.submodulePathConfig` for new submodules by
default (those created via git init or clone).
Important: setting init.defaultSubmodulePathConfig = true does
not globally enable `extensions.submodulePathConfig`. Existing
repositories will still have the extension disabled and will
require migration (for example via git submodule--helper command
added in the next commit).
Suggested-by: Patrick Steinhardt <ps@pks.im>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea of this extension is to abstract away the submodule gitdir
path implementation: everyone is expected to use the config and not
worry about how the path is computed internally, either in git or
other implementations.
With this extension enabled, the submodule.<name>.gitdir repo config
becomes the single source of truth for all submodule gitdir paths.
The submodule.<name>.gitdir config is added automatically for all new
submodules when this extension is enabled.
Git will throw an error if the extension is enabled and a config is
missing, advising users how to migrate. Migration is manual for now.
E.g. to add a missing config entry for an existing "foo" module:
git config submodule.foo.gitdir .git/modules/foo
Suggested-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation mark-up fix.
* ja/doc-markup-attached-paragraph-fix:
doc: fix indentation of refStorage item in git-config(1)
doc: change the markup of paragraphs following a nested list item
|
|
Commit 5a12fd2a8c (doc: change the markup of paragraphs following a
nested list item, 2025-09-27) converted the list of items in
config/extensions.adoc into a definition list. This caused a small
regression in the indentation of one item, but only when built with
AsciiDoctor. You can see the problem with:
$ ./doc-diff --asciidoctor 5a12fd2a8c^ 5a12fd2a8c
--- a/c44beea485f0f2feaf460e2ac87fdd5608d63cf0-asciidoctor/home/peff/share/man/man1/git-config.1
+++ b/5a12fd2a8c850df311aa149c9bad87b7cb002abb-asciidoctor/home/peff/share/man/man1/git-config.1
@@ -3128,9 +3128,9 @@ CONFIGURATION FILE
• reftable for the reftable format. This format is
experimental and its internals are subject to change.
- Note that this setting should only be set by git-init(1) or git-
- clone(1). Trying to change it after initialization will not work
- and will produce hard-to-diagnose issues.
+ Note that this setting should only be set by git-init(1) or git-
+ clone(1). Trying to change it after initialization will not work and
+ will produce hard-to-diagnose issues.
relativeWorktrees
If enabled, indicates at least one worktree has been linked with
(along with many other changes which are correctly fixing what
5a12fd2a8c intended to fix). The "Note" paragraph should remain aligned
with the bullet points, as they are left-aligned with the rest of the
definition text.
The confusion comes from a paragraph following a list item (ironically,
the same case that 5a12fd2a8c was solving!). We can solve it by adding
"--" block markers around the nested list. We couldn't have done that
before 5a12fd2a8c because before then our list was nested inside another
set of block markers, something that AsciiDoctor has trouble with. But
now that we are a top-level definition list, it is OK to do so (and in
fact, you can see that commit already made a similar adjustment for the
worktreeConfig entry).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Asciidoctor and asciidoc.py have different behaviors when a paragraph
follows a nested list item. Asciidoctor has a bug[1] that makes it keep a
plus sign (+) used to attached paragraphs at the beginning of the paragraph.
This commit uses workarounds to avoid this problem by using second level
definition lists and open blocks.
[1]:https://github.com/asciidoctor/asciidoctor/issues/4704
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The compatibility object format is only implemented for loose objects,
not packed objects, so anyone attempting to push or fetch data into a
repository with this option will likely not see it work as expected. In
addition, the underlying storage of loose object mapping is likely to
change because the current format is inefficient and does not handle
important mapping information such as that of submodules.
It would have been preferable to initially document that this was not
yet ready for prime time, but we did not do so. We hinted at the fact
that this functionality is incomplete in the description, but did not
say so explicitly. Let's do so now: indicate that this feature is
incomplete and subject to change and that the option is not designed to
be used by end users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We presently use the ".txt" extension for our AsciiDoc files. While not
wrong, most editors do not associate this extension with AsciiDoc,
meaning that contributors don't get automatic editor functionality that
could be useful, such as syntax highlighting and prose linting.
It is much more common to use the ".adoc" extension for AsciiDoc files,
since this helps editors automatically detect files and also allows
various forges to provide rich (HTML-like) rendering. Let's do that
here, renaming all of the files and updating the includes where
relevant. Adjust the various build scripts and makefiles to use the new
extension as well.
Note that this should not result in any user-visible changes to the
documentation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
