| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.
Lots of driver work for new devices and systems, and many other minor
fixes and updates. Included in here are:
- Thunderbolt subsystem driver updates and additions
- typec driver updates and additions
- usb gadget fixes all over the place, seems like people are finally
paying attention to these drivers for some reason
- xhci driver updates and fixes based on lots of reports
- usb-serial driver updates and additions
- new device ids
- other minor USB driver updates and fixes
All of these have been in linux-next for a while with no reported issues"
* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
usb: typec: hd3ss3220: fix VBUS regulator error message
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
usb: gadget: f_tcm: keep port count until LUN teardown completes
usb: usbtest: disable dynamic ID support
usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
usb: gadget: snps_udc_plat: clean up PHY on probe deferral
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
usb: gadget: midi2: remove default configfs groups on teardown
usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
usb: typec: thunderbolt: Disable work before freeing tbt on remove
usb: xhci: Handle bogus TRB pointers in Missed Service Error events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
|
Move `Module`, `InPlaceModule`, `ModuleMetadata` and `ThisModule` from
`lib.rs` into a new `rust/kernel/module.rs`. Re-export them from `lib.rs`
to avoid tree-wide changes.
Switch six bus driver registrations from `module.0` to the public
`ThisModule::as_ptr()` accessor, since the field is no longer visible
outside the new `module` submodule.
No functional change.
Assisted-by: opencode:glm-5.2
Suggested-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/all/DJFIQPLOVO4T.1K8T0VZM30LDA@garyguo.net/
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Alvin Sun <alvin.sun@linux.dev>
Link: https://patch.msgid.link/20260811-fix-fops-owner-v10-1-7e71776f9dbe@linux.dev
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The common practice in C drivers is to store pointers into `driver_data`
field of device IDs. The Rust code is however currently storing indices
into the fields and then carry a side table that maps the index to
pointers.
It is much simpler to just have `DeviceId` carry the pointer like C code
does. However, just doing so naively would cause a "pointers cannot be cast
to integers during const eval" error, as kernel_ulong_t does not have
provenance while pointers do, and Rust forbids `expose_provenance` during
consteval.
Work around this limitation by wrapping raw IDs in `MaybeUninit`.
`MaybeUninit` is allowed to host arbitrary bytes with or without
provenance, so we can just then use `unsafe` to store a pointer with
provenance there. This has the same effect as changing the C-side
definition to use `void*` instead of `kernel_ulong_t`, but without actually
changing the C side.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260629-id_info-v2-8-56fccbe9c5ef@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Wrap the generated code in a `const _: ()` block to avoid symbol conflict.
This removes the need of creating a new identifier.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260629-id_info-v2-7-56fccbe9c5ef@garyguo.net
[ Consider the serdev code merged in the meantime. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Move the `IdArray` creation from individual buses to be handled by shared
code in `device_id.rs`.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260629-id_info-v2-6-56fccbe9c5ef@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
It is possible that ID without driver_data will be passed to the driver,
e.g. `new_id` is used to dynamically create a new ID without data.
Therefore, the driver must be able to handle the case where `driver_data`
is 0. Thus, update the `probe` functions to get `Option`.
The current code cannot tell if the info does not exist or is the first
entry; however this will be achievable once the code is updated to use a
`&'static IdInfo` pointer instead of indices.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260629-id_info-v2-4-56fccbe9c5ef@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
When building the kernel using llvm-19.1.7-rust-1.85.1-x86_64, the
following symbols are generated:
$ nm vmlinux | grep ' _R'.*usb.*Device | rustfilt
...
ffffffff823f2490 T <kernel::usb::Device as kernel::sync::aref::AlwaysRefCounted>::dec_ref
ffffffff823f2470 T <kernel::usb::Device as kernel::sync::aref::AlwaysRefCounted>::inc_ref
...
$ nm vmlinux | grep ' _R'.*usb.*Interface | rustfilt
ffffffff823f2450 T <kernel::usb::Interface as kernel::sync::aref::AlwaysRefCounted>::dec_ref
ffffffff823f2430 T <kernel::usb::Interface as kernel::sync::aref::AlwaysRefCounted>::inc_ref
...
However, these Rust symbols are trivial wrappers around the
`usb_get_dev`, `usb_put_dev`, `usb_get_intf` and `usb_put_intf`
functions. It doesn't make sense to go through a trivial wrapper
for these functions.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260616223614.16444-1-nico.antinori.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All types in `bindings` implement `Zeroable` if they can. This enables
using `pin_init::zeroed()` for `usb_device_id` initialization instead
of relying on `..unsafe { MaybeUninit::zeroed().assume_init() }`.
This change improves readability and removes unnecessary unsafe blocks.
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260625224927.404258-1-nico.antinori.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a 'bound lifetime to the associated Data, changing type Data to type
Data<'bound>.
This allows the driver's bus device private data to capture the device /
driver bound lifetime; device resources can be stored directly by
reference rather than requiring Devres.
The probe() and disconnect() callbacks thus gain a 'bound lifetime
parameter on the methods themselves; avoiding a global lifetime on the
trait impl.
Existing drivers set type Data<'bound> = Self, preserving the current
behavior.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260525202921.124698-16-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Device<Core> references in probe callbacks are scoped to the callback,
not the full binding duration. Add a lifetime parameter to Core and
CoreInternal to accurately represent this in the type system.
Suggested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-12-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement Sync for Device<Bound> in addition to Device<Normal>.
Device<Bound> uses the same underlying struct usb_device as
Device<Normal>; Bound is a zero-sized type-state marker that does not
affect thread safety.
This is needed for drivers to store &'bound usb::Device<Bound> in their
private data while remaining Send.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20260525202921.124698-10-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a type Data<'bound> associated type to all bus driver traits,
decoupling the driver's bus device private data type from the driver
struct itself.
In the context of adding a 'bound lifetime, making this an associated
type has the advantage that it allows us to avoid a driver trait global
lifetime and it avoids the need for ForLt for bus device private data;
both of which make the subsequent implementation by buses much simpler.
All existing drivers and doc examples set type Data = Self to preserve
the current behavior.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525202921.124698-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
With the ForeignOwnable lifetime change, the 'static bound is no longer
necessary on the drvdata methods or bus adapter impls. Move it to the
Registration constructor instead.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-4-dakr@kernel.org
Co-developed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Update call sites in `usb.rs` to import `AlwaysRefCounted`
from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://patch.msgid.link/20260102202714.184223-4-shankari.ak0208@gmail.com
[ Rebase. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
|
|
Currently, the driver's device private data is allocated and initialized
from driver core code called from bus abstractions after the driver's
probe() callback returned the corresponding initializer.
Similarly, the driver's device private data is dropped within the
remove() callback of bus abstractions after calling the remove()
callback of the corresponding driver.
However, commit 6f61a2637abe ("rust: device: introduce
Device::drvdata()") introduced an accessor for the driver's device
private data for a Device<Bound>, i.e. a device that is currently bound
to a driver.
Obviously, this is in conflict with dropping the driver's device private
data in remove(), since a device can not be considered to be fully
unbound after remove() has finished:
We also have to consider registrations guarded by devres - such as IRQ
or class device registrations - which are torn down after remove() in
devres_release_all().
Thus, it can happen that, for instance, a class device or IRQ callback
still calls Device::drvdata(), which then runs concurrently to remove()
(which sets dev->driver_data to NULL and drops the driver's device
private data), before devres_release_all() started to tear down the
corresponding registration. This is because devres guarded registrations
can, as expected, access the corresponding Device<Bound> that defines
their scope.
In C it simply is the driver's responsibility to ensure that its device
private data is freed after e.g. an IRQ registration is unregistered.
Typically, C drivers achieve this by allocating their device private data
with e.g. devm_kzalloc() before doing anything else, i.e. before e.g.
registering an IRQ with devm_request_threaded_irq(), relying on the
reverse order cleanup of devres.
Technically, we could do something similar in Rust. However, the
resulting code would be pretty messy:
In Rust we have to differentiate between allocated but uninitialized
memory and initialized memory in the type system. Thus, we would need to
somehow keep track of whether the driver's device private data object
has been initialized (i.e. probe() was successful and returned a valid
initializer for this memory) and conditionally call the destructor of
the corresponding object when it is freed.
This is because we'd need to allocate and register the memory of the
driver's device private data *before* it is initialized by the
initializer returned by the driver's probe() callback, because the
driver could already register devres guarded registrations within
probe() outside of the driver's device private data initializer.
Luckily there is a much simpler solution: Instead of dropping the
driver's device private data at the end of remove(), we just drop it
after the device has been fully unbound, i.e. after all devres callbacks
have been processed.
For this, we introduce a new post_unbind() callback private to the
driver-core, i.e. the callback is neither exposed to drivers, nor to bus
abstractions.
This way, the driver-core code can simply continue to conditionally
allocate the memory for the driver's device private data when the
driver's initializer is returned from probe() - no change needed - and
drop it when the driver-core code receives the post_unbind() callback.
Closes: https://lore.kernel.org/all/DEZMS6Y4A7XE.XE7EUBT5SJFJ@kernel.org/
Fixes: 6f61a2637abe ("rust: device: introduce Device::drvdata()")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-7-dakr@kernel.org
[ Remove #ifdef CONFIG_RUST, rename post_unbind() to post_unbind_rust().
- Danilo]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add an associated type DriverData to the DriverLayout trait indicating
the type of the driver's device private data.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add an associated const DEVICE_DRIVER_OFFSET to the DriverLayout trait
indicating the offset of the embedded struct device_driver within
Self::DriverType, i.e. the specific driver structs, such as struct
pci_driver or struct platform_driver.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The DriverLayout trait describes the layout of a specific driver
structure, such as `struct pci_driver` or `struct platform_driver`.
In a first step, this replaces the associated type RegType of the
RegistrationOps with the DriverLayout::DriverType associated type.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-4-dakr@kernel.org
[ Rename driver::Driver to driver::DriverLayout, as it represents the
layout of a driver structure rather than the driver structure itself.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Convert all imports to use "kernel vertical" style.
With this, subsequent patches neither introduce unrelated changes nor
leave an inconsistent import pattern.
While at it, drop unnecessary imports covered by prelude::*.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260105142123.95030-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement the `AsBusDevice` trait for converting a `Device` reference to a
bus device reference for all bus devices.
The `AsBusDevice` trait allows abstractions to provide the bus device in
class device callbacks. It must not be used by drivers and is intended for
bus and class device abstractions only.
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Link: https://patch.msgid.link/20251027200547.1038967-2-markus.probst@posteo.de
[ * Remove unused import.
* Change visibility of AsBusDevice to public.
* Fix build for USB.
* Add impl for I2cClient.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A refactoring of Device::drvdata_obtain() broke T::disconnect() in the
USB abstractions.
"""
error[E0599]: no method named `data` found for struct `core::pin::Pin<kbox::Box<T, Kmalloc>>` in the current scope
--> rust/kernel/usb.rs:92:34
|
92 | T::disconnect(intf, data.data());
| ^^^^ method not found in `core::pin::Pin<kbox::Box<T, Kmalloc>>`
error: aborting due to 1 previous error
For more information about this error, try `rustc --explain E0599`.
make[2]: *** [rust/Makefile:553: rust/kernel.o] Error 1
make[1]: *** [/builddir/build/BUILD/kernel-6.18.0-build/kernel-next-20251103/linux-6.18.0-0.0.next.20251103.436.vanilla.fc44.x86_64/Makefile:1316: prepare] Error 2
make: *** [Makefile:256: __sub-make] Error 2
"""
This slipped through, since the USB abstractions are globally disabled.
However, the USB tree recently enabled them, hence it showed up in
linux-next.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/1c8afbc0-e888-4702-9e4e-fa8aef0f97ae@leemhuis.info/
Fixes: 6bbaa93912bf ("rust: device: narrow the generic of drvdata_obtain()")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://patch.msgid.link/20251103110115.1925072-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Let T be the actual private driver data type without the surrounding
box, as it leaves less room for potential bugs.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The driver model defines the lifetime of the private data stored in (and
owned by) a bus device to be valid from when the driver is bound to a
device (i.e. from successful probe()) until the driver is unbound from
the device.
This is already taken care of by the Rust implementation of the driver
model. However, we still ask drivers to return a Result<Pin<KBox<Self>>>
from probe().
Unlike in C, where we do not have the concept of initializers, but
rather deal with uninitialized memory, drivers can just return an
impl PinInit<Self, Error> instead.
This contributes to more clarity to the fact that a driver returns it's
device private data in probe() and the Rust driver model owns the data,
manages the lifetime and - considering the lifetime - provides (safe)
accessors for the driver.
Hence, let probe() functions return an impl PinInit<Self, Error> instead
of Result<Pin<KBox<Self>>>.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The USB abstractions target to support USB interface drivers.
While internally the abstraction has to deal with the interface's parent
USB device, there shouldn't be a need for users to deal with the parent
USB device directly.
Functions, such as for preparing and sending USB URBs, can be
implemented for the usb::Interface structure directly. Whether this
internal implementation has to deal with the parent USB device can
remain transparent to USB interface drivers.
Hence, keep the usb::Device structure private for now, in order to avoid
confusion for users and to make it less likely to accidentally expose
APIs with unnecessary indirections.
Should we start supporting USB device drivers, or need it for any other
reason we do not foresee yet, it should be trivial to make it public
again.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250925190400.144699-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When deriving the parent USB device (struct usb_device) from a USB
interface (struct usb_interface), do not retain the device context.
For the Bound context, as pointed out by Alan in [1], it is not
guaranteed that the parent USB device is always bound when the interface
is bound.
The bigger problem, however, is that we can't infer the Core context,
since eventually it indicates that the device lock is held. However,
there is no guarantee that if the device lock of the interface is held,
also the device lock of the parent USB device is held.
Hence, fix this by not inferring any device context information; while
at it, fix up the (affected) safety comments.
Link: https://lore.kernel.org/all/0ff2a825-1115-426a-a6f9-df544cd0c5fc@rowland.harvard.edu/ [1]
Fixes: e7e2296b0ecf ("rust: usb: add basic USB abstractions")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250925190400.144699-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add basic USB abstractions, consisting of usb::{Device, Interface,
Driver, Adapter, DeviceId} and the module_usb_driver macro. This is the
first step in being able to write USB device drivers, which paves the
way for USB media drivers - for example - among others.
This initial support will then be used by a subsequent sample driver,
which constitutes the only user of the USB abstractions so far.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250825-b4-usb-v1-1-7aa024de7ae8@collabora.com
[ force USB = y for now - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
