| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull drm updates from Dave Airlie:
"Highlights:
- dmemcg eviction support is good for low VRAM things like Steam
Machine
- AMD adds gfx6-8 modifier support for older GPUs that enables a
bunch of wayland stuff
- i915/xe has some new hw support but also a lot of display
refactoring
Everything:
perf:
- export perf_allow_ APIs for xe
udmabuf:
- remove default size limit of 64MB
rust:
- i/o rework (signed tag from driver-core tree)
- add registration guard and registration data
- fix unbounded lifetimes in ioctl handler args
- fix a drm_dev_register race
- gem_shmem: add DmaResvGuard helper
- gpuvm: require send/sync for driver data
- implement send/sync for GpuVaAlloc and GpuVmBo
- add SmContext lifetime
- rename dma_handle to dma_address
- change pci_sriov_get_totalvfs return to unsigned int
core:
- create drm_of_get_panel_orientation
- send per-connector hotplug events
- add thunderbolt UBHR tunneling support
connector:
- add color format property
dmem:
- introduce a peak file
- accept one region per limit
- add dmemcg support for eviction
gpusvm:
- reorg code to give drivers more flexibility
atomic:
- add create_state callback and helper
- add documentation on atomic commit lifetime
buddy:
- add per-order free
- add used block scoreboard
- fix UAF
- test buffer clearance on resume
- add phys_addr->block helper
gem:
- drop DRIVER_GEM_GPUVA flag
ttm:
- be more aggressive allocating below protection limit
sched:
- add test suite for concurrent job submissions
hdmi:
- hook the color format property in helpers
mipi-dsi:
- add MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT
bridge:
- add atomic create callbacks
- drop atomic reset
- display-connector: don't autoenable HPD IRQ
- trigger initial HPD for DP
- ti-sn65dsi83: remove NO_HFP and NO_HBP mode flags
- analogix_dp: switch to DP link training helpers
dp:
- add support for DSC max delta BPP
edid:
- parse panel type from DisplayID 2.x Display Parameters
sysfb:
- improve panel, stride, framebuffer size validation
panel:
- implement ref counting for struct drm_panel
- himax-hx83121a: add backlight regulator support
- novatek-nt36672a: Inline panel init sequences
- visionox-vtdr6130: enable DSC
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
- panel-edp: quirks
- AUO B116XAT04.3, CMN N116BCP-EA2, CSW MNB601LS1-8
- BOE NV116WH2-M30, BOE NT116WHM-N21, BOE NV116FH1-M31
- BOE NV116FH1-M30, NV140FHM-N5B, TM156VDXP25
- BOE NE160QDM-NY1, MB116AS01
- new:
- Samsung ATNA40HQ08-0, Anbernic TD4310
- Chipone ICNA35XX, Ilitek ILI9488
- Ilitek ILI7807S, Renesas R63419
- MNE001BS6-2, MNF601BS4-1, Sharp LQ120P1JX51
virtio:
- add support for save/restore virtio_gpu_objects
- abort vq wait on device removal
amdgpu:
- add color format DRM property
- initial compute pipe reset support
- add GFX 6-8 modifier support
- initial DCN 6.0.0 support
- dmemcg eviction support
- improved boundary checking for bios parsing
- RAS updates and rework
- VCN secure submission fixes
- 8K panel fix
- Display KUNIT tests
- parse panel type from DisplayID
- Align IP discovery to pci device lifetime
- SOC15 register macro cleanups
- UVD memory placement fixes
- GFX9 mode2 reset fixes
- drop unnecessary BUG/BUG_ON
- GFX8 soft reset rework
- enable soft reset on GFX8
- PSP/SMU 15.0.9 update
- VI ASPM fix
- userq fixes
- amdgpu_vm_get_task_info_pasid lifetime fix
- DC CACP support
- change system_unbound_wq with system_dfl_wq
- Loosen VFCT bios parsing to deal with pci=realloc
- SI/SMU7 AC/DC switch fix
- VM fence handling fix
- GEM close optimisation
- Apple Studio Display fixes
- DC FRL fixes
amdkfd:
- initial compute pipe reset support
- allow applications to opt out of sigbus on fatal errors
- improve CRIU boundary checks
- MQD handling rework
- move TBA/TMA from system to device memory
- avoid topology-lock in kfd_mmap
- SVM eviction fixes
radeon:
- fix unset CONFIG_ACPI build
i915:
- Novalake (NVL display version 35) timing generator enabling
- NVL DC3CO enabling
- enable UBHR link rates on thunderbolt tunnels
- Reduce Xe3+ PM demand peak bandwidth
- enable pipe DMC error interrupts for display 30+
- add kunit tests for DP link config selection
- refactor and document DP link recovery
- i915/xe driver display probe/remove/suspend/resume/shutdown cleanup
and unification
- i915/xe display runtime PM unified
- Break i915 and xe panic dependency on struct intel_framebuffer
- Streamline Pre/Post-CSC LUT loops
- drop TGL DC3DO support
- CDCLK santization
- fix HDMI scrambling enable
- fix phys bo pread/pwrite with offset
- add missing nospec on parallel submit slot
- fix some NULL derefs
xe:
- drop force_execlist module param
- gate observation streams with perf_allow_cpu
- skip FORCE_WC and vm_bound check for external dma-bufs
- dmemcg eviction support
- remove unused NVL-S GuC
- TLB invalidation improvements
- NVL-S updated PCI-IDs and w/a
- madvise: optimise invalidation path
- fix infinite gt-reset loop in timeout recovery
- update TTM device benefical_order
- wait on external BO kernel fences in exec ioctl
- add/use more KLV helpers
- sriov: disable display in admin only PF mode
- add RAS GPU health indicator
- optimise TTM populate for DONTNEED BO
- drop force_probe for NVL-s
- add debugfs for pcode info
amdxdna:
- disable device buffer export
nova:
- build nova-core/nova-drm from drivers/gpu
- export nova-core rust symbols (workaround)
- GSP boot process consolidation
- Boot GSP with vGPU enabled
- TLV firmware image format support
- Hopper/Blackwell fixes and cleanups
- I/O projection adoption
tyr:
- firmware loading and MCU boot
- add generic slot manager + MMU
- GPU VM support ARM64 LPAE page tables
- add kernel buffer object for internal allocations
- add parser for Mali CSF
- add MCU booting
nouveau:
- race fixes
- check instmem iomapping at first use
- add dmemcg support
- expose NVDEC channels
- add scanline position/head state support for GSP
qxl:
- convert simple encoder to regular
ethosu:
- add perf counter support
etnaviv:
- force flush on power register ops
msm:
- support DSC configuration with slice_per_pkt > 1
mxsfb:
- fix disable sequence
panthor:
- support sparse mappings
rockchip:
- switch away from simple helpers
- support YUV background color
- fix layer config timeout
- add edp support for rk3576
- add batch command submission function
rocket:
- error handling and NULL ptr deref fixes
sun4i:
- switch away from simple helpers
imagination:
- mark BXM-4-64 MC1 as support
host1x:
- support tegra264
tegra:
- add DSI for tegra 20/30
v3d:
- reduce PM runtime autosuspend delay
- scheduler fixes and refactoring
- deprecate v3d 3.3 and 4.1
- validate CPU job query boundaries
hibmc:
- improve plane format handling
- switch to gem shmem
mediatek:
- cec: correct compat for mt7623-8167?
exynos:
- remove simple dependency
- add error handling to encoder paths
- take i2c adapter module reference"
* tag 'drm-next-2026-08-20' of https://gitlab.freedesktop.org/drm/kernel: (2074 commits)
drm/xe/mcr: Take vcs1/vecs1 into account for first media slice
drm/xe: Fix a bug in pc_adjust_freq_bounds()
drm/xe: Fix xe_device_probe() failure
drm/xe/drm_ras: Move has_drm_ras check to drm_ras layer
drm/xe/ras: Fix boot-time ras error processing
drm/amd/display: make DC_RUN_WITH_PREEMPTION_ENABLED misuse a build error
drm/amd/pm: silence uninitialized variable warnings
drm/amdgpu: skip BOs being torn down during GTT recovery
drm/amdgpu: Reject UVD message with invalid number of h265 refs
drm/amdgpu: keep PRT mappings off the vm_bo state lists
drm/amdgpu: fix nbif 6.3.1 l1 low power not functional
drm/amd/display: fix BT.2020 YCbCr output CSC matrices for DCE
drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix
drm/amdgpu: Implement insert_end for VCE 3
drm/amdgpu: Fix UVD min buffer sizes
drm/amdgpu: Fix UVD decode image min size calculation
drm/amdgpu: Fix UVD dpb min size calculation for H264
drm/amdgpu: Reject UVD message with dimensions above 4096
drm/amdgpu: check ASPM on the dGPU host link
drm/radeon: fix autosuspend cleanup during teardown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
|
The `dma_handle` naming is inherited from the C API, but what this
really describes is the device DMA address; everything named
`dma_handle` is actually a `dma_addr_t`.
This naming introduces some confusion on the Rust API side, as handles
are supposed to be opaque tokens, yet we were doing address computation
on values returned by `dma_handle`.
Rename `dma_handle` to `dma_address` while nova-core is still its only
user.
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/all/DK75LUA4NLGI.3P29AIZQE20V2@kernel.org/
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://patch.msgid.link/20260805-falcon-dma-projections-v2-2-4cc9f3f13ee9@nvidia.com
[ Rebase and fix up build failures due to newly introduced dma_handle()
calls. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The `__init` method is not designed to be a public API (existence of "__"
is a hint for this); replace users with `pin_init::raw_[try_]init` which
does the same thing.
There are a few users of `__init` which are replaced as well.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260729-merge-init-v2-4-26adf47109e7@garyguo.net
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
Coherent<T>::write_to_slice() calculates a zero-byte copy when the file
offset is beyond the allocation, but still calls
UserSliceWriter::write_dma(). The latter rejects offsets beyond the
allocation even when the copy length is zero, so a debugfs read past EOF
returns -ERANGE.
Return before calling write_dma() when the offset is at or beyond the
allocation, matching simple_read_from_buffer() EOF semantics.
Fixes: 016818513936 ("rust: dma: implement BinaryWriter for Coherent<[u8]>")
Cc: stable@vger.kernel.org
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/291566-Library/topic/.E2.9C.94.20Possible.20past-EOF.20bug.20in.20Coherent.3CT.3E.3A.3Awrite_to_slice/near/611677095
Signed-off-by: Younes Akhouayri <git@younes.io>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Link: https://patch.msgid.link/20260730-fix-dma-coherent-eof-v2-1-8aff21054afa@younes.io
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
One feature that was lost from the old `dma_read!` and `dma_write!` when
moving to `io_read!` and `io_write!` was the ability to read/write a large
structs. However, the semantics was unclear to begin with, as there was no
guarantee about their atomicity even for structs that were small enough to
fit in u32. Re-introduce the capability in the form of copying methods.
dma_read!(foo, bar) -> io_project!(foo, bar).copy_read()
dma_write!(foo, bar, baz) -> io_project!(foo, bar).copy_write(baz)
Model these semantics after memcpy so user has clear expectation of lack of
atomicity. As an additional benefit of this change, this now works for MMIO
as well by mapping them to `memcpy_{from,to}io`.
For slices which is DST so the `copy_read` and `copy_write` API above can't
work, add `copy_from_slice` and `copy_to_slice` to copy from/to normal
memory.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260706-io_projection-v6-19-72cd5d055d54@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The primitive read/write use case is covered by the `io_read!` and
`io_write!` macro. The non-primitive use case was finicky; they should
either be achieved using `CoherentBox` or `as_ref()/as_mut()` to assert the
lack of concurrent access, or should be using memcpy-like APIs to express
the non-atomic and tearable nature.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260706-io_projection-v6-18-72cd5d055d54@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement a `CoherentView` type which is a view of `Coherent`. To be able
to give out DMA handles, the view type contains both CPU and DMA pointers,
and the projection method projects both at once.
Delegate most of the `Io` implementation to `SysMemBackend`. Provide a
method to erase the DMA handle and give out a `SysMem` view, if the user
does not need the `dma_handle`.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260706-io_projection-v6-15-72cd5d055d54@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
All users have been converted to use keyworded index projection syntax to
explicitly state their intention when doing index projection.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260602-projection-syntax-rework-v2-6-6989470f5440@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Demonstrate the preferred syntax of index projection in DMA documentation
and examples. A few `[i]?` cases are converted to demonstrate the new
variant.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260602-projection-syntax-rework-v2-4-6989470f5440@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
There have been a few cases where the programmer knows that the indices are
in bounds but the compiler cannot deduce that. This is also
compiler-version-dependent, so using build indexing here can be
problematic. On the other hand, it is also not ideal to use the fallible
variant, as it adds an error handling path that is never hit.
Add a new panicking index projection for this scenario. Like all panicking
operations, this should be used carefully only in cases where the user
knows the index is going to be in bounds, and panicking would indicate
something is catastrophically wrong.
To signify this, require users to explicitly denote the type of index being
used. The existing two types of index projections also gain the keyworded
version, which will be the recommended way going forward.
The keyworded syntax also paves the way of perhaps adding more flavors in
the future, e.g. `unsafe` index projection. However, unless the code is
extremely performance sensitive and bounds checking cannot be tolerated,
the panicking variant is safer and should be preferred, so it will be left
to the future when demand arises.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260602-projection-syntax-rework-v2-3-6989470f5440@garyguo.net
[ Fixed broken intra-doc link. Added a few extra intra-doc links. Reworded
some docs slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Device<Core> references in probe callbacks are scoped to the callback,
not the full binding duration. Add a lifetime parameter to Core and
CoreInternal to accurately represent this in the type system.
Suggested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260525202921.124698-12-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A very common pattern is to create a block of coherent memory with the
content of an already-existing slice of bytes (e.g. a loaded firmware
blob).
`CoherentBox` makes this easier, but still implies a potentially
panicking operation with `copy_from_slice` that requires a `PANIC`
comment.
Add `from_slice_with_attrs` and `from_slice` methods to both `Coherent`
and `CoherentBox` to turn this into a trivial one-step operation.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260327-b4-nova-dma-removal-v2-1-616e1d0b5cb3@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Add CoherentHandle, an opaque DMA allocation type for buffers that are
only ever accessed by hardware. Unlike Coherent<T>, it does not provide
CPU access to the allocated memory.
CoherentHandle implicitly sets DMA_ATTR_NO_KERNEL_MAPPING and stores the
value returned by dma_alloc_attrs() as an opaque handle
(NonNull<c_void>) rather than a typed pointer, since with this flag the
C API returns an opaque cookie (e.g. struct page *), not a CPU pointer
to the allocated memory.
Only the DMA bus address is exposed to drivers; the opaque handle is
used solely to free the allocation on drop.
This commit is for reference only; there is currently no in-tree user.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260321172749.592387-2-dakr@kernel.org
[acourbot: fix conflict in dma.rs.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
When DMA_ATTR_NO_KERNEL_MAPPING is passed to dma_alloc_attrs(), the
returned CPU address is not a pointer to the allocated memory but an
opaque handle (e.g. struct page *).
Coherent<T> (or CoherentAllocation<T> respectively) stores this value as
NonNull<T> and exposes methods that dereference it and even modify its
contents.
Remove the flag from the public attrs module such that drivers cannot
pass it to Coherent<T> (or CoherentAllocation<T> respectively) in the
first place.
Instead DMA_ATTR_NO_KERNEL_MAPPING can be supported with an additional
opaque type (e.g. CoherentHandle) which does not provide access to the
allocated memory.
Cc: stable@vger.kernel.org
Fixes: ad2907b4e308 ("rust: add dma coherent allocator abstraction")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260321172749.592387-1-dakr@kernel.org
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Generalize the BinaryWriter implementation from Coherent<[u8]> to
Coherent<T> where T: KnownSize + AsBytes + ?Sized. The implementation
only uses size() and write_dma(), neither of which depends on the
inner type being a byte slice.
This allows any Coherent allocation with an AsBytes inner type to be
exposed as a debugfs binary file.
Acked-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260325003921.3420-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement the BinaryWriter trait for Coherent<[u8]>, enabling DMA
coherent allocations to be exposed as readable binary files. The
implementation handles offset tracking and bounds checking, copying data
from the coherent allocation to userspace via write_dma().
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-4-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Now that everything has been converted to the new dma::Coherent<T> API,
remove dma::CoherentAllocation<T>.
Suggested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/DH8O47F2GM1Z.3H3E13RSKIV22@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Analogous to Coherent::zeroed() and Coherent::zeroed_with_attrs(), add
Coherent:init() and Coherent::init_with_attrs() which both take an impl
Init<T, E> argument initializing the DMA coherent memory.
Compared to CoherentInit, Coherent::init() is a one-shot constructor
that runs an Init closure and immediately exposes the DMA handle,
whereas CoherentInit is a multi-stage initializer that provides safe
&mut T access by withholding the DMA address until converted to
Coherent.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently, dma::Coherent cannot safely provide (mutable) access to its
underlying memory because the memory might be concurrently accessed by a
DMA device. This makes it difficult to safely initialize the memory
before handing it over to the hardware.
Introduce dma::CoherentBox, a type that encapsulates a dma::Coherent
before its DMA address is exposed to the device. dma::CoherentBox can
guarantee exclusive access to the inner dma::Coherent and implement
Deref and DerefMut.
Once the memory is properly initialized, dma::CoherentBox can be
converted into a regular dma::Coherent.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-5-dakr@kernel.org
[ Remove unnecessary trait bounds. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
These constructors create a coherent container of a single object
instead of slice. They are named `zeroed` and `zeroed_with_attrs` to
emphasis that they are created initialized zeroed. It is intended that
there'll be new constructors that take `PinInit` instead of zeroing.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-4-dakr@kernel.org
[ Use kernel import style. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently, `CoherentAllocation` is concecptually a DMA coherent container
of a slice of `[T]` of runtime-checked length. Generalize it by creating
`dma::Coherent<T>` which can hold any value of `T`.
`Coherent::alloc_with_attrs` is implemented but not yet exposed, as I
believe we should not expose the way to obtain an uninitialized coherent
region.
`Coherent<[T]>` provides a `len` method instead of the previous `count()`
method to be consistent with methods on slices.
The existing type is re-defined as a type alias of `Coherent<[T]>` to ease
transition. Methods in use are not yet removed.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Convert all imports to use "kernel vertical" style.
With this, subsequent patches neither introduce unrelated changes nor
leave an inconsistent import pattern.
While at it, drop unnecessary imports covered by prelude::*.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Current `dma_read!`, `dma_write!` macros also use a custom
`addr_of!()`-based implementation for projecting pointers, which has
soundness issue as it relies on absence of `Deref` implementation on types.
It also has a soundness issue where it does not protect against unaligned
fields (when `#[repr(packed)]` is used) so it can generate misaligned
accesses.
This commit migrates them to use the general pointer projection
infrastructure, which handles these cases correctly.
As part of migration, the macro is updated to have an improved surface
syntax. The current macro have
dma_read!(a.b.c[d].e.f)
to mean `a.b.c` is a DMA coherent allocation and it should project into it
with `[d].e.f` and do a read, which is confusing as it makes the indexing
operator integral to the macro (so it will break if you have an array of
`CoherentAllocation`, for example).
This also is problematic as we would like to generalize
`CoherentAllocation` from just slices to arbitrary types.
Make the macro expects `dma_read!(path.to.dma, .path.inside.dma)` as the
canonical syntax. The index operator is no longer special and is just one
type of projection (in additional to field projection). Similarly, make
`dma_write!(path.to.dma, .path.inside.dma, value)` become the canonical
syntax for writing.
Another issue of the current macro is that it is always fallible. This
makes sense with existing design of `CoherentAllocation`, but once we
support fixed size arrays with `CoherentAllocation`, it is desirable to
have the ability to perform infallible indexing as well, e.g. doing a `[0]`
index of `[Foo; 2]` is okay and can be checked at build-time, so forcing
falliblity is non-ideal. To capture this, the macro is changed to use
`[idx]` as infallible projection and `[idx]?` as fallible index projection
(those syntax are part of the general projection infra). A benefit of this
is that while individual indexing operation may fail, the overall
read/write operation is not fallible.
Fixes: ad2907b4e308 ("rust: add dma coherent allocator abstraction")
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260302164239.284084-4-gary@kernel.org
[ Capitalize safety comments; slightly improve wording in doc-comments.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Make dma_set_max_seg_size() available to Rust so drivers can perform
standard DMA setup steps.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Acked-by: Robin Murphy <robvin.murphy@arm.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260128135320.689046-1-beata.michalska@arm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The `pci` module is conditional on CONFIG_PCI. When it's disabled, the
intra-doc link to `pci::Device` causes rustdoc warnings:
warning: unresolved link to `::kernel::pci::Device`
--> rust/kernel/dma.rs:30:70
|
30 | /// where the underlying bus is DMA capable, such as [`pci::Device`](::kernel::pci::Device) or
| ^^^^^^^^^^^^^^^^^^^^^ no item named `pci` in module `kernel`
Fix this by making the documentation conditional on CONFIG_PCI.
Fixes: d06d5f66f549 ("rust: dma: implement `dma::Device` trait")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20251231045728.1912024-1-fujita.tomonori@gmail.com
[ Keep the "such as" part indicating a list of examples; fix typos in
commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Removes a safety requirement that incorrectly states callers must
ensure the device does not access memory while the returned slice
is live, as this method doesn't return a slice.
Fixes: d37a39f607c4 ("rust: dma: add as_slice/write functions for CoherentAllocation")
Signed-off-by: Yilin Chen <1479826151@qq.com>
Link: https://patch.msgid.link/tencent_5195C0324923A2B67DEF8AE4B8E139BCB105@qq.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In struct CoherentAllocation, use NonNull<T> instead of a raw *mut T for
the CPU address; the CPU address of a valid CoherentAllocation won't
ever be NULL.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103190655.2326191-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Using start_ptr() and start_ptr_mut() has the advantage that we inherit
the requirements the a mutable or immutable reference from those
methods.
Hence, use them instead of self.cpu_addr.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103190655.2326191-1-dakr@kernel.org
[ Keep using self.cpu_addr in item_from_index(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
This patch introduces the DMA_ATTR_MMIO attribute to mark DMA buffers
that reside in memory-mapped I/O (MMIO) regions, such as device BARs
exposed through the host bridge, which are accessible for peer-to-peer
(P2P) DMA.
This attribute is especially useful for exporting device memory to other
devices for DMA without CPU involvement, and avoids unnecessary or
potentially detrimental CPU cache maintenance calls.
DMA_ATTR_MMIO is supposed to provide dma_map_resource() functionality
without need to call to special function and perform branching when
processing generic containers like bio_vec by the callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/6f058ec395c5348014860dbc2eed348c17975843.1757423202.git.leonro@nvidia.com
|
|
Add a type alias for bindings::dma_addr_t (DmaAddress), such that we do
not have to access bindings directly.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250828133323.53311-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add the `DataDirection` struct, a newtype wrapper around the C
`enum dma_data_direction`.
This provides a type-safe Rust interface for specifying the direction of
DMA transfers.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250828133323.53311-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Update call sites in the dma subsystem to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://lore.kernel.org/r/20250814104133.350093-1-shankari.ak0208@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
Implement `dma_set_mask()`, `dma_set_coherent_mask()` and
`dma_set_mask_and_coherent()` in the `dma::Device` trait.
Those methods are used to set up the device's DMA addressing
capabilities.
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250716150354.51081-3-dakr@kernel.org
[ Add DmaMask::try_new(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a trait that defines the DMA specific methods of devices.
The `dma::Device` trait is to be implemented by bus device
representations, where the underlying bus is capable of DMA, such as
`pci::Device` or `platform::Device`.
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250716150354.51081-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull alloc and DMA updates from Danilo Krummrich:
Box:
- Implement Borrow / BorrowMut for Box<T, A>.
Vec:
- Implement Default for Vec<T, A>.
- Implement Borrow / BorrowMut for Vec<T, A>.
DMA:
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
- Require mutable reference for as_slice_mut() and write().
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone).
* tag 'alloc-next-v6.17-2025-07-15' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: add mm folks as reviewers to rust alloc
rust: dma: require mutable reference for as_slice_mut() and write()
rust: dma: add dma_handle_with_offset method to CoherentAllocation
rust: dma: expose the count and size of CoherentAllocation
rust: dma: fix doc-comment of dma_handle()
rust: dma: add as_slice/write functions for CoherentAllocation
rust: dma: convert the read/write macros to return Result
rust: dma: clarify wording and be consistent in `coherent` nomenclature
rust: alloc: implement `Borrow` and `BorrowMut` for `KBox`
rust: alloc: implement `Borrow` and `BorrowMut` for `Vec`
rust: vec: impl Default for Vec with any allocator
|
|
Given the safety requirements of as_slice_mut() and write() taking an
immutable reference is technically not incorrect.
However, let's leverage the compiler's capabilities and require a
mutable reference to ensure exclusive access.
This also fixes a clippy warning introduced with 1.88:
warning: mutable borrow from immutable input(s)
--> rust/kernel/dma.rs:297:78
|
297 | pub unsafe fn as_slice_mut(&self, offset: usize, count: usize) -> Result<&mut [T]> {
| ^^^^^^^^
Fixes: d37a39f607c4 ("rust: dma: add as_slice/write functions for CoherentAllocation")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250628165120.90149-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Sometimes one may want to obtain a DMA handle starting at a given
offset. This can be done by adding said offset to the result of
`dma_handle()`, but doing so on the client side carries the risk that
the operation will go outside the bounds of the allocation.
Thus, add a `dma_handle_with_offset` method that adds the desired offset
after checking that it is still valid.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-3-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
These properties are very useful to have (and to be used by nova-core)
and should be accessible, hence add them.
Additionally, add type invariants for the size of an allocation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-2-ecf41ef99252@nvidia.com
[ Slightly extend the commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A word was apparently missing in this sentence, hence fix it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-1-ecf41ef99252@nvidia.com
Fixes: ad2907b4e308 ("rust: add dma coherent allocator abstraction")
[ Slightly expand commit subject and add 'Fixes:' tag. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add unsafe accessors for the region for reading or writing large
blocks of data.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250602085444.1925053-4-abdiel.janulgue@gmail.com
[ Fix line length and slightly reword safety comment in doc-test of
CoherentAllocation::write(); fix formatting issue. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We could do better here by having the macros return `Result`,
so that we don't have to wrap these calls in a closure for
validation which is confusing.
Co-developed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/87h63qhz4q.fsf@kernel.org/
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250602085444.1925053-3-abdiel.janulgue@gmail.com
[ Fix line length in dma_read!(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In the kernel, `consistent` and `coherent` are used interchangeably for the
region described in this api. Stick with `coherent` nomenclature
to show that dma_alloc_coherent() is being used, in addition to improving
the clarity in the DMA mapping attributes documentation.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250602085444.1925053-2-abdiel.janulgue@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In Rust 1.63.0, Clippy introduced the `as_underscore` lint [1]:
> The conversion might include lossy conversion or a dangerous cast that
> might go undetected due to the type being inferred.
>
> The lint is allowed by default as using `_` is less wordy than always
> specifying the type.
Always specifying the type is especially helpful in function call
contexts where the inferred type may change at a distance. Specifying
the type also allows Clippy to spot more cases of `useless_conversion`.
The primary downside is the need to specify the type in trivial getters.
There are 4 such functions: 3 have become slightly less ergonomic, 1 was
revealed to be a `useless_conversion`.
While this doesn't eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#as_underscore [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-4-f43b024581e8@gmail.com
[ Changed `isize` to `c_long`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In Rust 1.51.0, Clippy introduced the `ptr_as_ptr` lint [1]:
> Though `as` casts between raw pointers are not terrible,
> `pointer::cast` is safer because it cannot accidentally change the
> pointer's mutability, nor cast the pointer to other types like `usize`.
There are a few classes of changes required:
- Modules generated by bindgen are marked
`#[allow(clippy::ptr_as_ptr)]`.
- Inferred casts (` as _`) are replaced with `.cast()`.
- Ascribed casts (` as *... T`) are replaced with `.cast::<T>()`.
- Multistep casts from references (` as *const _ as *const T`) are
replaced with `core::ptr::from_ref(&x).cast()` with or without `::<T>`
according to the previous rules. The `core::ptr::from_ref` call is
required because `(x as *const _).cast::<T>()` results in inference
failure.
- Native literal C strings are replaced with `c_str!().as_char_ptr()`.
- `*mut *mut T as _` is replaced with `let *mut *const T = (*mut *mut
T)`.cast();` since pointer to pointer can be confusing.
Apply these changes and enable the lint -- no functional change
intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ptr_as_ptr [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-1-f43b024581e8@gmail.com
[ Added `.cast()` for `opp`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
