| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Unlocking robust non-PI futexes happens in user space with the following
sequence:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = 0;
3) lval = atomic_xchg(lock, lval);
4) if (lval & WAITERS)
5) sys_futex(WAKE,....);
6) robust_list_clear_op_pending();
That opens a window between #3 and #6 where the mutex could be acquired by
some other task which observes that it is the last user and:
A) unmaps the mutex memory
B) maps a different file, which ends up covering the same address
When the original task exits before reaching #6 then the kernel robust list
handling observes the pending op entry and tries to fix up user space.
In case that the newly mapped data contains the TID of the exiting thread
at the address of the mutex/futex the kernel will set the owner died bit in
that memory and therefore corrupting unrelated data.
PI futexes have a similar problem both for the non-contented user space
unlock and the in kernel unlock:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = gettid();
3) if (!atomic_try_cmpxchg(lock, lval, 0))
4) sys_futex(UNLOCK_PI,....);
5) robust_list_clear_op_pending();
Address the first part of the problem where the futexes have waiters and
need to enter the kernel anyway. Add a new FUTEX_ROBUST_UNLOCK flag, which
is valid for the sys_futex() FUTEX_UNLOCK_PI, FUTEX_WAKE, FUTEX_WAKE_BITSET
operations.
This deliberately omits FUTEX_WAKE_OP from this treatment as it's unclear
whether this is needed and there is no usage of it in glibc either to
investigate.
For the futex2 syscall family this needs to be implemented with a new
syscall.
The sys_futex() case [ab]uses the @uaddr2 argument to hand the pointer to
robust_list_head::list_pending_op into the kernel. This argument is only
evaluated when the FUTEX_ROBUST_UNLOCK bit is set and is therefore backward
compatible.
This is an explicit argument to avoid the lookup of the robust list pointer
and retrieving the pending op pointer from there. User space has the
pointer already available so it can just put it into the @uaddr2
argument. Aside of that this allows the usage of multiple robust lists in
the future without any changes to the internal functions as they just operate
on the provided pointer.
This requires a second flag FUTEX_ROBUST_LIST32 which indicates that the
robust list pointer points to an u32 and not to an u64. This is required
for two reasons:
1) sys_futex() has no compat variant
2) The gaming emulators use both both 64-bit and compat 32-bit robust
lists in the same 64-bit application
As a consequence 32-bit applications have to set this flag unconditionally
so they can run on a 64-bit kernel in compat mode unmodified. 32-bit
kernels return an error code when the flag is not set. 64-bit kernels will
happily clear the full 64 bits if user space fails to set it.
In case of FUTEX_UNLOCK_PI this clears the robust list pending op when the
unlock succeeded. In case of errors, the user space value is still locked
by the caller and therefore the above cannot happen.
In case of FUTEX_WAKE* this does the unlock of the futex in the kernel and
clears the robust list pending op when the unlock was successful. If not,
the user space value is still locked and user space has to deal with the
returned error. That means that the unlocking of non-PI robust futexes has
to use the same try_cmpxchg() unlock scheme as PI futexes.
If the clearing of the pending list op fails (fault) then the kernel clears
the registered robust list pointer if it matches to prevent that exit()
will try to handle invalid data. That's a valid paranoid decision because
the robust list head sits usually in the TLS and if the TLS is not longer
accessible then the chance for fixing up the resulting mess is very close
to zero.
The problem of non-contended unlocks still exists and will be addressed
separately.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.670514505@kernel.org
|
|
Make the operand defines tabular for readability sake.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.615600933@kernel.org
|
|
The marker for PI futexes in the robust list is a hardcoded 0x1 which lacks
any sensible form of documentation.
Provide proper defines for the bit and the mask and fix up the usage
sites. Thereby convert the boolean pi argument into a modifier argument,
which allows new modifier bits to be trivially added and conveyed.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.458758556@kernel.org
|
|
Extend the futex2 interface to be aware of mempolicy.
When FUTEX2_MPOL is specified and there is a MPOL_PREFERRED or
home_node specified covering the futex address, use that hash-map.
Notably, in this case the futex will go to the global node hashtable,
even if it is a PRIVATE futex.
When FUTEX2_NUMA|FUTEX2_MPOL is specified and the user specified node
value is FUTEX_NO_NODE, the MPOL lookup (as described above) will be
tried first before reverting to setting node to the local node.
[bigeasy: add CONFIG_FUTEX_MPOL, add MPOL to FUTEX2_VALID_MASK, write
the node only to user if FUTEX_NO_NODE was supplied]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-18-bigeasy@linutronix.de
|
|
Extend the futex2 interface to be numa aware.
When FUTEX2_NUMA is specified for a futex, the user value is extended
to two words (of the same size). The first is the user value we all
know, the second one will be the node to place this futex on.
struct futex_numa_32 {
u32 val;
u32 node;
};
When node is set to ~0, WAIT will set it to the current node_id such
that WAKE knows where to find it. If userspace corrupts the node value
between WAIT and WAKE, the futex will not be found and no wakeup will
happen.
When FUTEX2_NUMA is not set, the node is simply an extension of the
hash, such that traditional futexes are still interleaved over the
nodes.
This is done to avoid having to have a separate !numa hash-table.
[bigeasy: ensure to have at least hashsize of 4 in futex_init(), add
pr_info() for size and allocation information. Cast the naddr math to
void*]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-17-bigeasy@linutronix.de
|
|
Add the definition for the missing but always intended extra sizes,
and add a NUMA flag for the planned numa extention.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.617057368@noisy.programming.kicks-ass.net
|
|
sys_futex_waitv() is part of the futex2 series (the first and only so
far) of syscalls and has a flags field per futex (as opposed to flags
being encoded in the futex op).
This new flags field has a new namespace, which unfortunately isn't
super explicit. Notably it currently takes FUTEX_32 and
FUTEX_PRIVATE_FLAG.
Introduce the FUTEX2 namespace to clarify this
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.507327749@noisy.programming.kicks-ass.net
|
|
Add support to wait on multiple futexes. This is the interface
implemented by this syscall:
futex_waitv(struct futex_waitv *waiters, unsigned int nr_futexes,
unsigned int flags, struct timespec *timeout, clockid_t clockid)
struct futex_waitv {
__u64 val;
__u64 uaddr;
__u32 flags;
__u32 __reserved;
};
Given an array of struct futex_waitv, wait on each uaddr. The thread
wakes if a futex_wake() is performed at any uaddr. The syscall returns
immediately if any waiter has *uaddr != val. *timeout is an optional
absolute timeout value for the operation. This syscall supports only
64bit sized timeout structs. The flags argument of the syscall should be
empty, but it can be used for future extensions. Flags for shared
futexes, sizes, etc. should be used on the individual flags of each
waiter.
__reserved is used for explicit padding and should be 0, but it might be
used for future extensions. If the userspace uses 32-bit pointers, it
should make sure to explicitly cast it when assigning to waitv::uaddr.
Returns the array index of one of the woken futexes. There’s no given
information of how many were woken, or any particular attribute of it
(if it’s the first woken, if it is of the smaller index...).
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210923171111.300673-17-andrealmeid@collabora.com
|
|
The FUTEX_LOCK_PI futex operand uses a CLOCK_REALTIME based absolute
timeout since it was implemented, but it does not require that the
FUTEX_CLOCK_REALTIME flag is set, because that was introduced later.
In theory as none of the user space implementations can set the
FUTEX_CLOCK_REALTIME flag on this operand, it would be possible to
creatively abuse it and make the meaning invers, i.e. select CLOCK_REALTIME
when not set and CLOCK_MONOTONIC when set. But that's a nasty hackery.
Another option would be to have a new FUTEX_CLOCK_MONOTONIC flag only for
FUTEX_LOCK_PI, but that's also awkward because it does not allow libraries
to handle the timeout clock selection consistently.
So provide a new FUTEX_LOCK_PI2 operand which implements the timeout
semantics which the other operands use and leave FUTEX_LOCK_PI alone.
Reported-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210422194705.440773992@linutronix.de
|
|
license
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
|
