| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- swiotlb:
- new configuration option for the default pool size
(Jagadeesh Pagadala)
- reduce overhead for high watermark tracking (chenhuguanshen)
- minor code cleanups and improvements (Vova Sharaienko, Honglei Huang
and Marek Szyprowski)
- add proper tracking of the shared DMA state through direct, pool and
swiotlb paths (Aneesh Kumar K.V)
This is important for confidential-computing
* tag 'dma-mapping-7.3-2026-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/swiotlb: decouple high watermark tracking from CONFIG_DEBUG_FS
MAINTAINERS: update tree for DMA MAPPING HELPERS
dma/swiotlb: introduce Kconfig option for compile-time default pool size
dma-direct: Improve readability of the dma_direct_map_sg() for P2PDMA case
iommu/dma: simplify dma_iova_destroy() and drop the free_iova helper
dma-coherent: use KiB in DMA allocation logs
dma-coherent: fix spacing coding style issue
* tag 'dma-mapping-7.3-2026-08-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (23 commits)
swiotlb: remove unused SWIOTLB_FORCE flag
dma: swiotlb: handle set_memory_decrypted() failures
dma: swiotlb: free dynamic pools from process context
dma-direct: rename ret to cpu_addr in alloc helpers
dma-direct: select DMA address encoding from __DMA_ATTR_ALLOC_CC_SHARED
dma-direct: set decrypted flag for remapped DMA allocations
dma-direct: make dma_direct_map_phys() honor DMA_ATTR_CC_SHARED
dma-direct: Move dma_direct_map_phys() to dma/direct.c
dma-direct: pass attrs to dma_capable() for DMA_ATTR_CC_SHARED checks
dma-mapping: make dma_pgprot() honor __DMA_ATTR_ALLOC_CC_SHARED
dma: swiotlb: track pool encryption state and honor DMA_ATTR_CC_SHARED
dma: swiotlb: pass mapping attributes by reference
dma-pool: track decrypted atomic pools and select them via attrs
dma-direct: use __DMA_ATTR_ALLOC_CC_SHARED in alloc/free paths
dma-mapping: Add internal shared allocation attribute
coco: arm64: s390: powerpc: Mark secure guests with CC_ATTR_GUEST_MEM_ENCRYPT
dma-direct: swiotlb: handle swiotlb alloc/free outside __dma_direct_alloc_pages
s390: Expose protected virtualization through cc_platform_has()
swiotlb: Preserve allocation virtual address for dynamic pools
dma: free atomic pool pages by physical address
...
|
|
Under heavy concurrent DMA traffic on CoCo VMs, inc_used_and_hiwater()
performs an atomic_long_add_return() plus a CAS loop on the global
used_hiwater, and dec_used() performs an atomic_long_sub() on total_used.
All CPUs contend on the same cacheline, causing measurable throughput
degradation at scale.
Historically these counters were only compiled in under CONFIG_DEBUG_FS,
which means production kernels with debugfs paid the atomic overhead
unconditionally. Make the tracking boot-time opt-in instead so that it
is disabled by default with near-zero overhead via static_call, and can
be enabled via "swiotlb=track_hiwater" parameter on demand for debugging.
Note that when CONFIG_DEBUG_FS is enabled but hiwater tracking is disabled,
the "io_tlb_used" metric reports an approximate value rather than an
instantaneously exact one.
Suggested-by: Fan Du <fan.du@intel.com>
Signed-off-by: Jun Miao <jun.miao@intel.com>
Co-developed-by: Fan Du <fan.du@intel.com>
Signed-off-by: Fan Du <fan.du@intel.com>
Tested-by: chenhuguanshen <chenhgs@chinatelecom.cn>
Signed-off-by: chenhuguanshen <chenhgs@chinatelecom.cn>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20260812070459.637077-1-frankchen158@126.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
SWIOTLB_FORCE has no remaining in-tree users. Forced bouncing is now
controlled through the swiotlb=force command line option via
swiotlb_force_bounce.
Remove the unused flag and simplify the force_bounce initialization.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-24-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
swiotlb_dyn_free() is used after removing a dynamic swiotlb pool from
RCU-protected lists. It can call swiotlb_free_tlb(), which may need to
restore the encryption state of an unencrypted pool with
set_memory_encrypted() before freeing the pages.
RCU callbacks run in atomic context, but set_memory_encrypted() is not
guaranteed to be atomic-safe on all architectures. For example, page
attribute updates may allocate page tables or take sleeping locks.
Use queue_rcu_work() for dynamic pool freeing instead. This keeps the RCU
grace period before freeing a published pool, while running the actual pool
teardown from workqueue context. Use the same helper for the transient-pool
error path, since that path may also be reached from atomic DMA mapping
context.
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-22-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Teach swiotlb to distinguish between encrypted and decrypted bounce
buffer pools, and make allocation and mapping paths select a pool whose
state matches the requested DMA attributes.
Add a cc_shared flag to io_tlb_mem, initialize it for the default and
restricted pools, and propagate __DMA_ATTR_ALLOC_CC_SHARED into swiotlb
pool allocation. Reject swiotlb alloc/map requests when the selected pool
does not match the required encrypted/decrypted state.
Also return DMA addresses with the matching phys_to_dma_{encrypted,
unencrypted} helper so the DMA address encoding stays consistent with the
chosen pool.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-14-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Change swiotlb_tbl_map_single() to take the DMA mapping attributes by
reference and update the direct callers accordingly.
This is a preparatory change for a follow-up patch which updates the
attributes based on the selected swiotlb pool. Keeping the signature change
separate makes the follow-up patch easier to review.
No functional change in this patch.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-13-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Move swiotlb allocation out of __dma_direct_alloc_pages() and handle it in
dma_direct_alloc() / dma_direct_alloc_pages().
This is needed for follow-up changes that simplify the handling of
memory encryption/decryption based on the DMA attribute flags.
swiotlb backing pages are already mapped decrypted by
swiotlb_update_mem_attributes() and rmem_swiotlb_device_init(), so
dma-direct should not call dma_set_decrypted() on allocation nor
dma_set_encrypted() on free for swiotlb-backed memory.
Update alloc/free paths to detect swiotlb-backed pages and skip
encrypt/decrypt transitions for those paths. Keep the existing highmem
rejection in dma_direct_alloc_pages() for swiotlb allocations.
Only for "restricted-dma-pool", we currently set `for_alloc = true`, while
rmem_swiotlb_device_init() decrypts the whole pool up front. This pool is
typically used together with "shared-dma-pool", where the shared region is
accessed after remap/ioremap and the returned address is suitable for
decrypted memory access. So existing code paths remain valid.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20260717180442.110954-8-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
The SWIOTLB bounce buffer pool size is hardcoded at 64 MB via
IO_TLB_DEFAULT_SIZE with no compile-time knob to adjust it. On
memory-constrained embedded or mobile platforms equipped with a
hardware IOMMU (e.g., ARM SMMU) covering most DMA-capable devices,
reserving 64 MB at boot is unnecessarily wasteful — the SWIOTLB is
only exercised for devices that bypass the IOMMU or have restricted
DMA address ranges.
Introduce CONFIG_SWIOTLB_DEFAULT_SIZE_MB, an integer Kconfig option
(range 1–64 MB, default 64) that allows platforms to set a smaller
compile-time default. IO_TLB_DEFAULT_SIZE is updated to derive from
this value when CONFIG_SWIOTLB is enabled, preserving the existing
64 MB default when the option is not configured.
The runtime "swiotlb=<nslabs>" kernel parameter override remains
fully supported and takes precedence over the compile-time default.
Signed-off-by: Jagadeesh Pagadala <jpagadal@qti.qualcomm.com>
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20260702-swiotlb-v2-1-9205f3ba5408@oss.qualcomm.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair
in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple
places, the pool is found and used in one function, and then must
be found again in the next function that is called because only the
tlb_addr is passed as an argument. These are the six call sites:
dma_direct_map_page:
1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce
dma_direct_unmap_page:
2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer
3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu ->
swiotlb_bounce
4. is_swiotlb_buffer
5. swiotlb_tbl_unmap_single -> swiotlb_del_transient
6. swiotlb_tbl_unmap_single -> swiotlb_release_slots
Reduce the number of calls by finding the pool at a higher level, and
passing it as an argument instead of searching again. A key change is
for is_swiotlb_buffer() to return a pool pointer instead of a boolean,
and then pass this pool pointer to subsequent swiotlb functions.
There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer
is a swiotlb buffer before calling a swiotlb function. To reduce code
duplication in getting the pool pointer and passing it as an argument,
introduce inline wrappers for this pattern. The generated code is
essentially unchanged.
Since is_swiotlb_buffer() no longer returns a boolean, rename some
functions to reflect the change:
* swiotlb_find_pool() becomes __swiotlb_find_pool()
* is_swiotlb_buffer() becomes swiotlb_find_pool()
* is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool()
With these changes, a round-trip map/unmap pair requires only 2 pool
lookups (listed using the new names and wrappers):
dma_direct_unmap_page:
1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool
2. swiotlb_tbl_unmap_single -> swiotlb_find_pool
These changes come from noticing the inefficiencies in a code review,
not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC,
__swiotlb_find_pool() is not trivial, and it uses an RCU read lock,
so avoiding the redundant calls helps performance in a hot path.
When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction
is minimal and the perf benefits are likely negligible, but no
harm is done.
No functional change is intended.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently swiotlb_tbl_map_single() takes alloc_align_mask and
alloc_size arguments to specify an swiotlb allocation that is larger
than mapping_size. This larger allocation is used solely by
iommu_dma_map_single() to handle untrusted devices that should not have
DMA visibility to memory pages that are partially used for unrelated
kernel data.
Having two arguments to specify the allocation is redundant. While
alloc_align_mask naturally specifies the alignment of the starting
address of the allocation, it can also implicitly specify the size
by rounding up the mapping_size to that alignment.
Additionally, the current approach has an edge case bug.
iommu_dma_map_page() already does the rounding up to compute the
alloc_size argument. But swiotlb_tbl_map_single() then calculates the
alignment offset based on the DMA min_align_mask, and adds that offset to
alloc_size. If the offset is non-zero, the addition may result in a value
that is larger than the max the swiotlb can allocate. If the rounding up
is done _after_ the alignment offset is added to the mapping_size (and
the original mapping_size conforms to the value returned by
swiotlb_max_mapping_size), then the max that the swiotlb can allocate
will not be exceeded.
In view of these issues, simplify the swiotlb_tbl_map_single() interface
by removing the alloc_size argument. Most call sites pass the same value
for mapping_size and alloc_size, and they pass alloc_align_mask as zero.
Just remove the redundant argument from these callers, as they will see
no functional change. For iommu_dma_map_page() also remove the alloc_size
argument, and have swiotlb_tbl_map_single() compute the alloc_size by
rounding up mapping_size after adding the offset based on min_align_mask.
This has the side effect of fixing the edge case bug but with no other
functional change.
Also add a sanity test on the alloc_align_mask. While IOMMU code
currently ensures the granule is not larger than PAGE_SIZE, if that
guarantee were to be removed in the future, the downstream effect on the
swiotlb might go unnoticed until strange allocation failures occurred.
Tested on an ARM64 system with 16K page size and some kernel test-only
hackery to allow modifying the DMA min_align_mask and the granule size
that becomes the alloc_align_mask. Tested these combinations with a
variety of original memory addresses and sizes, including those that
reproduce the edge case bug:
* 4K granule and 0 min_align_mask
* 4K granule and 0xFFF min_align_mask (4K - 1)
* 16K granule and 0xFFF min_align_mask
* 64K granule and 0xFFF min_align_mask
* 64K granule and 0x3FFF min_align_mask (16K - 1)
With the changes, all combinations pass.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Introduce a new debugfs interface io_tlb_transient_nslabs. The device
driver can create a new swiotlb transient memory pool once default
memory pool is full. To export the swiotlb transient memory pool usage
via debugfs would help the user estimate the size of transient swiotlb
memory pool or analyze device driver memory leak issue.
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB
can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb:
search the software IO TLB only if the device makes use of it"), the flag
is correctly set, but it is then never checked. Add the actual check here.
Note that this code is an alternative to the default pool check, not an
additional check, because:
1. swiotlb_find_pool() also searches the default pool;
2. if dma_uses_io_tlb is false, the default swiotlb pool is not used.
Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and
*not* using software IO TLB, this patch increases IOPS by approx 2% for
4-way parallel I/O.
The write memory barrier in swiotlb_dyn_alloc() is not needed, because a
newly allocated pool must always be observed by swiotlb_find_slots() before
an address from that pool is passed to is_swiotlb_buffer().
Correctness was verified using the following litmus test:
C swiotlb-new-pool
(*
* Result: Never
*
* Check that a newly allocated pool is always visible when the
* corresponding swiotlb buffer is visible.
*)
{
mem_pools = default;
}
P0(int **mem_pools, int *pool)
{
/* add_mem_pool() */
WRITE_ONCE(*pool, 999);
rcu_assign_pointer(*mem_pools, pool);
}
P1(int **mem_pools, int *flag, int *buf)
{
/* swiotlb_find_slots() */
int *r0;
int r1;
rcu_read_lock();
r0 = READ_ONCE(*mem_pools);
r1 = READ_ONCE(*r0);
rcu_read_unlock();
if (r1) {
WRITE_ONCE(*flag, 1);
smp_mb();
}
/* device driver (presumed) */
WRITE_ONCE(*buf, r1);
}
P2(int **mem_pools, int *flag, int *buf)
{
/* device driver (presumed) */
int r0 = READ_ONCE(*buf);
/* is_swiotlb_buffer() */
int r1;
int *r2;
int r3;
smp_rmb();
r1 = READ_ONCE(*flag);
if (r1) {
/* swiotlb_find_pool() */
rcu_read_lock();
r2 = READ_ONCE(*mem_pools);
r3 = READ_ONCE(*r2);
rcu_read_unlock();
}
}
exists (2:r0<>0 /\ 2:r3=0) (* Not found. *)
Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it")
Reported-by: Jonathan Corbet <corbet@lwn.net>
Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Skip searching the software IO TLB if a device has never used it, making
sure these devices are not affected by the introduction of multiple IO TLB
memory pools.
Additional memory barrier is required to ensure that the new value of the
flag is visible to other CPUs after mapping a new bounce buffer. For
efficiency, the flag check should be inlined, and then the memory barrier
must be moved to is_swiotlb_buffer(). However, it can replace the existing
barrier in swiotlb_find_pool(), because all callers use is_swiotlb_buffer()
first to verify that the buffer address belongs to the software IO TLB.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When swiotlb_find_slots() cannot find suitable slots, schedule the
allocation of a new memory pool. It is not possible to allocate the pool
immediately, because this code may run in interrupt context, which is not
suitable for large memory allocations. This means that the memory pool will
be available too late for the currently requested mapping, but the stress
on the software IO TLB allocator is likely to continue, and subsequent
allocations will benefit from the additional pool eventually.
Keep all memory pools for an allocator in an RCU list to avoid locking on
the read side. For modifications, add a new spinlock to struct io_tlb_mem.
The spinlock also protects updates to the total number of slabs (nslabs in
struct io_tlb_mem), but not reads of the value. Readers may therefore
encounter a stale value, but this is not an issue:
- swiotlb_tbl_map_single() and is_swiotlb_active() only check for non-zero
value. This is ensured by the existence of the default memory pool,
allocated at boot.
- The exact value is used only for non-critical purposes (debugfs, kernel
messages).
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The value returned by default_swiotlb_limit() should be constant, because
it is used to decide whether DMA can be used. To allow allocating memory
pools on the fly, use the maximum possible physical address rather than the
highest address used by the default pool.
For swiotlb_init_remap(), this is either an arch-specific limit used by
memblock_alloc_low(), or the highest directly mapped physical address if
the initialization flags include SWIOTLB_ANY. For swiotlb_init_late(), the
highest address is determined by the GFP flags.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Try to allocate a transient memory pool if no suitable slots can be found
and the respective SWIOTLB is allowed to grow. The transient pool is just
enough big for this one bounce buffer. It is inserted into a per-device
list of transient memory pools, and it is freed again when the bounce
buffer is unmapped.
Transient memory pools are kept in an RCU list. A memory barrier is
required after adding a new entry, because any address within a transient
buffer must be immediately recognized as belonging to the SWIOTLB, even if
it is passed to another CPU.
Deletion does not require any synchronization beyond RCU ordering
guarantees. After a buffer is unmapped, its physical addresses may no
longer be passed to the DMA API, so the memory range of the corresponding
stale entry in the RCU list never matches. If the memory range gets
allocated again, then it happens only after a RCU quiescent state.
Since bounce buffers can now be allocated from different pools, add a
parameter to swiotlb_alloc_pool() to let the caller know which memory pool
is used. Add swiotlb_find_pool() to find the memory pool corresponding to
an address. This function is now also used by is_swiotlb_buffer(), because
a simple boundary check is no longer sufficient.
The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(),
simplified and enhanced to use coherent memory pools if needed.
Note that this is not the most efficient way to provide a bounce buffer,
but when a DMA buffer can't be mapped, something may (and will) actually
break. At that point it is better to make an allocation, even if it may be
an expensive operation.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a config option (CONFIG_SWIOTLB_DYNAMIC) to enable or disable dynamic
allocation of additional bounce buffers.
If this option is set, mark the default SWIOTLB as able to grow and
restricted DMA pools as unable.
However, if the address of the default memory pool is explicitly queried,
make the default SWIOTLB also unable to grow. This is currently used to set
up PCI BAR movable regions on some Octeon MIPS boards which may not be able
to use a SWIOTLB pool elsewhere in physical memory. See octeon_pci_setup()
for more details.
If a remap function is specified, it must be also called on any dynamically
allocated pools, but there are some issues:
- The remap function may block, so it should not be called from an atomic
context.
- There is no corresponding unremap() function if the memory pool is
freed.
- The only in-tree implementation (xen_swiotlb_fixup) requires that the
number of slots in the memory pool is a multiple of SWIOTLB_SEGSIZE.
Keep it simple for now and disable growing the SWIOTLB if a remap function
was specified.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Carve out memory pool specific fields from struct io_tlb_mem. The original
struct now contains shared data for the whole allocator, while the new
struct io_tlb_pool contains data that is specific to one memory pool of
(potentially) many.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add some kernel-doc comments and move the existing documentation of struct
io_tlb_slot to its correct location. The latter was forgotten in commit
942a8186eb445 ("swiotlb: move struct io_tlb_slot to swiotlb.c").
Use the opportunity to give swiotlb_do_find_slots() a more descriptive name
and make it clear how it differs from swiotlb_find_slots().
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.
To avoid breaking existing users, provide helper functions for the few
required fields.
As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 20347fca71a3 ("swiotlb: split up the global swiotlb lock") moved
the number of used slots to struct io_tlb_area, but it did not remove
the field from struct io_tlb_mem.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
|
|
The tracking of used_hiwater adds an atomic operation to the hot
path. This is acceptable only when debugging the kernel. To make
sure that the fields can never be used by mistake, do not even
include them in struct io_tlb_mem if CONFIG_DEBUG_FS is not set.
The build fails after doing that. To fix it, it is necessary to
remove all code specific to debugfs and instead provide a stub
implementation of swiotlb_create_debugfs_files(). As a bonus, this
change allows to remove one __maybe_unused attribute.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove swiotlb_unencrypted_base and the associated
code.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-8-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
swiotlb currently reports the total number of slabs and the instantaneous
in-use slabs in debugfs. But with increased usage of swiotlb for all I/O
in Confidential Computing (coco) VMs, it has become difficult to know
how much memory to allocate for swiotlb bounce buffers, either via the
automatic algorithm in the kernel or by specifying a value on the
kernel boot line. The current automatic algorithm generously allocates
swiotlb bounce buffer memory, and may be wasting significant memory in
many use cases.
To support better understanding of swiotlb usage, add tracking of the
the high water mark for usage of the default swiotlb bounce buffer memory
pool and any reserved memory pools. Report these high water marks in
debugfs along with the other swiotlb pool metrics. Allow the high water
marks to be reset to zero at runtime by writing to them.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
swiotlb_max_segment has always been a bogus API, so remove it now that
the remaining callers are gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
No need to expose this structure definition in the header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 20347fca71a3 ("swiotlb: split up the global swiotlb lock") splits
io_tlb_mem into multiple areas. Each area has its own lock and index. The
global ones are not used so remove them.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Traditionally swiotlb was not performance critical because it was only
used for slow devices. But in some setups, like TDX/SEV confidential
guests, all IO has to go through swiotlb. Currently swiotlb only has a
single lock. Under high IO load with multiple CPUs this can lead to
significat lock contention on the swiotlb lock.
This patch splits the swiotlb bounce buffer pool into individual areas
which have their own lock. Each CPU tries to allocate in its own area
first. Only if that fails does it search other areas. On freeing the
allocation is freed into the area where the memory was originally
allocated from.
Area number can be set via swiotlb kernel parameter and is default
to be possible cpu number. If possible cpu number is not power of
2, area number will be round up to the next power of 2.
This idea from Andi Kleen patch(https://github.com/intel/tdx/commit/
4529b5784c141782c72ec9bd9a92df2b68cb7d45).
Based-on-idea-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The 'swiotlb_force' is removed since commit c6af2aa9ffc9 ("swiotlb: make
the swiotlb_init interface more useful").
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
No users left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
To shared more code between swiotlb and xen-swiotlb, offer a
swiotlb_init_remap interface and add a remap callback to
swiotlb_init_late that will allow Xen to remap the buffer without
duplicating much of the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Let the caller chose a zone to allocate from. This will be used
later on by the xen-swiotlb initialization on arm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Power SVM wants to allocate a swiotlb buffer that is not restricted to
low memory for the trusted hypervisor scheme. Consolidate the support
for this into the swiotlb_init interface by adding a new flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
swiotlb_late_init_with_default_size is an overly verbose name that
doesn't even catch what the function is doing, given that the size is
not just a default but the actual requested size.
Rename it to swiotlb_init_late.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Remove the bogus Xen override that was usually larger than the actual
size and just calculate the value on demand. Note that
swiotlb_max_segment still doesn't make sense as an interface and should
eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
In Isolation VM with AMD SEV, bounce buffer needs to be accessed via
extra address space which is above shared_gpa_boundary (E.G 39 bit
address line) reported by Hyper-V CPUID ISOLATION_CONFIG. The access
physical address will be original physical address + shared_gpa_boundary.
The shared_gpa_boundary in the AMD SEV SNP spec is called virtual top of
memory(vTOM). Memory addresses below vTOM are automatically treated as
private while memory above vTOM is treated as shared.
Expose swiotlb_unencrypted_base for platforms to set unencrypted
memory base offset and platform calls swiotlb_update_mem_attributes()
to remap swiotlb mem to unencrypted address space. memremap() can
not be called in the early stage and so put remapping code into
swiotlb_update_mem_attributes(). Store remap address and use it to copy
data from/to swiotlb bounce buffer.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-2-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add an argument to swiotlb_tbl_map_single that specifies the desired
alignment of the allocated buffer. This is used by dma-iommu to ensure
the buffer is aligned to the iova granule size when using swiotlb with
untrusted sub-granule mappings. This addresses an issue where adjacent
slots could be exposed to the untrusted device if IO_TLB_SIZE < iova
granule < PAGE_SIZE.
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-7-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since commit 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the
swiotlb pool used"), 'struct device' may hold a copy of the global
'io_default_tlb_mem' pointer if the device is using swiotlb for DMA. A
subsequent call to swiotlb_exit() will therefore leave dangling pointers
behind in these device structures, resulting in KASAN splats such as:
| BUG: KASAN: use-after-free in __iommu_dma_unmap_swiotlb+0x64/0xb0
| Read of size 8 at addr ffff8881d7830000 by task swapper/0/0
|
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc3-debug #1
| Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020
| Call Trace:
| <IRQ>
| dump_stack+0x9c/0xcf
| print_address_description.constprop.0+0x18/0x130
| kasan_report.cold+0x7f/0x111
| __iommu_dma_unmap_swiotlb+0x64/0xb0
| nvme_pci_complete_rq+0x73/0x130
| blk_complete_reqs+0x6f/0x80
| __do_softirq+0xfc/0x3be
Convert 'io_default_tlb_mem' to a static structure, so that the
per-device pointers remain valid after swiotlb_exit() has been invoked.
All users are updated to reference the static structure directly, using
the 'nslabs' field to determine whether swiotlb has been initialised.
The 'slots' array is still allocated dynamically and referenced via a
pointer rather than a flexible array member.
Cc: Claire Chang <tientzu@chromium.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fixes: 69031f500865 ("swiotlb: Set dev->dma_io_tlb_mem to the swiotlb pool used")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
|
|
Add the initialization function to create restricted DMA pools from
matching reserved-memory nodes.
Regardless of swiotlb setting, the restricted DMA pool is preferred if
available.
The restricted DMA pools provide a basic level of protection against the
DMA overwriting buffer contents at unexpected times. However, to protect
against general data leakage and system memory corruption, the system
needs to provide a way to lock down the memory access, e.g., MPU.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Add the functions, swiotlb_{alloc,free} and is_swiotlb_for_alloc to
support the memory allocation from restricted DMA pool.
The restricted DMA pool is preferred if available.
Note that since coherent allocation needs remapping, one must set up
another device coherent pool by shared-dma-pool and use
dma_alloc_from_dev_coherent instead for atomic coherent allocation.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Propagate the swiotlb_force into io_tlb_default_mem->force_bounce and
use it to determine whether to bounce the data or not. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Includes Will's fix]
|
|
Update is_swiotlb_active to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Update is_swiotlb_buffer to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
All callers just use it to check if swiotlb is active at all, for which
they can just use is_swiotlb_active. In the longer run drivers need
to stop using is_swiotlb_active as well, but let's do the simple step
first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Instead of allocating ->list and ->orig_addr separately just do one
dynamic allocation for the actual io_tlb_mem structure. This simplifies
a lot of the initialization code, and also allows to just check
io_tlb_default_mem to see if swiotlb is in use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Added a new struct, io_tlb_mem, as the IO TLB memory pool descriptor and
moved relevant global variables into that struct.
This will be useful later to allow for restricted DMA pool.
Signed-off-by: Claire Chang <tientzu@chromium.org>
[hch: rebased]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Split swiotlb_tbl_sync_single into two separate funtions for the to device
and to cpu synchronization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
