| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Some code cleanups to rename the function used to identify ZAC
devices and declare some local functions static (me)
- Refactoring and improvement of the translation of the SCSI REPORT
SUPPORTED OPCODES command to allow users access to the entire list of
supported commands (me)
- Fix the translation of the WRITE SAME command with UNMAP bit set (DSM
TRIM) for devices with a sector size larger than 2K and devices that
support multiple TRIM segments (Niklas)
- Add support detecting support for and translating the SCSI commands
related to the storage elements depopulation feature (GET PHYSICAL
ELEMENT STATUS, REMOVE ELEMENT AND TRUCATE, REMOVE ELEMENT AND MODIFY
ZONES and RESTORE ELEMENTS AND REBUILD) (me)
- Improvements to the sata_mv driver probe code (clocks and IRQ
initialization) (Rosen)
- Improve resource initialization in the pata_rb532_cf, pata_pxa,
sata_highbank and ahci_da850 drivers (Rosen)
- Improve PIO data-in command completions to better hndle slow devices,
e.g. CF cards (Richard)
- Improve the DMA channel management using device resources in the
pata_pxa driver (Rosen)
- Fix the pata_ep93xx driver to correctly fallback to PIO mode if DMA
initialization fails (Rosen)
- Use named initializers to define the match tables of the ahci_xgene,
ahci_qoriq and ahci_platform drivers (Pawel)
* tag 'ata-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (28 commits)
ata: use named initializers for acpi_device_id
ata: pata_ep93xx: fix PIO fallback when DMA init fails
ata: pata_pxa: use devres for DMA channel management
ata: libata-sff: don't busy-wait for PIO data-in command completion
ata: ahci_da850: use devm_platform_ioremap_resource()
ata: sata_highbank: use devm_platform_ioremap_resource
ata: pata_pxa: use devm_platform_ioremap_resource
ata: pata_rb532_cf: use devm_platform_ioremap_resource()
ata: sata_mv: use devm clock helpers
ata: sata_mv: Use platform_get_irq() to get interrupt
ata: pata_mpc52xx: Remove redundant dev_err()
ata: libata-eh: make ata_eh_qc_complete() and ata_eh_qc_retry() static
ata: libata-scsi: add support for the REMOVE ELEMENT AND MODIFY ZONES command
ata: libata-scsi: add support for the RESTORE ELEMENTS AND REBUILD command
ata: libata-scsi: add support for the REMOVE ELEMENT AND TRUNCATE command
ata: libata-scsi: add support for the GET PHYSICAL ELEMENT STATUS command
ata: libata-core: detect support for depopulation capabilities
ata: libata-scsi: improve ata_get_xlat_func
ata: libata: improve the definition of device flags
scsi: define depopulation capabilities related service actions
...
|
|
Modify comments to prevent kernel-doc warnings:
- use "/*" for a non-kernel-doc comment
- add a Returns: section for ata_id_major_version()
Warning: include/linux/ata.h:770 Cannot find identifier on line:
*
Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables'
Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead
Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Define the translation for the REMOVE ELEMENT AND MODIFY ZONES command
(SERVICE ACTION IN command with service action
SAI_REMOVE_ELEMENT_AND_MODIFY_ZONES) into the ATA command
ATA_CMD_REMOVE_ELEMENT_AND_MODIFY_ZONES with the new function
ata_scsi_remove_element_and_modify_zones_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set, and the target device being a ZAC zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the RESTORE ELEMENTS AND REBUILD command
(SERVICE ACTION IN command with service action
SAI_RESTORE_ELEMENTS_AND_REBUILD) into the ATA command
ATA_CMD_RESTORE_ELEMENTS_AND_REBUILD with the new function
ata_scsi_restore_elements_and_rebuild_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP_RESTORE being set.
The ATA command completion is handled using the function
ata_scsi_depop_ua_cap_changed_complete() so that on a successful
completion, a UNIT ATTENTION with the additional sense code set to
CAPACITY DATA HAS CHANGED is raised.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the REMOVE ELEMENT AND TRUNCATE command
(SERVICE ACTION IN command with service action
SAI_REMOVE_ELEMENT_AND_TRUNCATE) into the ATA command
ATA_CMD_REMOVE_ELEMENT_AND_TRUNCATE with the new function
ata_scsi_remove_element_and_truncate_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set.
The ATA command completion is handled using the function
ata_scsi_depop_ua_cap_changed_complete() so that on a successful
completion, a UNIT ATTENTION with the additional sense code set to
CAPACITY DATA HAS CHANGED is raised.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the GET PHYSICAL ELEMENT STATUS command
(SERVICE ACTION IN command with service action
SAI_GET_PHYSICAL_ELEMENT_STATUS) into the ATA command
ATA_CMD_GET_PHYS_ELEMENT_STATUS with the new function
ata_scsi_get_phys_element_status_xlat(). The reply of this function also
needs translation from little endian to big endian. This is done with the
completion callback ata_scsi_get_phys_element_status_complete().
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modified
to correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
DSM TRIM currently always emits a single 512-byte page of LBA Range Entries
(ATA_MAX_TRIM_RNUM == 64 ranges), regardless of how many pages the device
can accept in one DATA SET MANAGEMENT command.
The maximum is reported by MAX PAGES PER DSM COMMAND (IDENTIFY DEVICE word
105). Honour it: size the TRIM descriptor as a whole number of 512-byte
pages, bounded by that limit and by the logical sector size (the WRITE SAME
data-out buffer is a single logical block). Build and transfer only as
many pages as the request needs, and set the DSM COUNT field, qc->nbytes
and the maximum WRITE SAME length in the Block Limits VPD page accordingly.
Build the descriptor straight into the WRITE SAME data-out buffer using an
atomic sg_miter mapping, instead of staging it in the shared ata_scsi_rbuf
and copying it out. This removes the global ata_scsi_rbuf_lock and a
memcpy from the TRIM path.
While commit 9379e6b8e0f9 ("libata: Safely overwrite attached page in WRITE
SAME xlat") replaced direct access to the data-out buffer with an
intermediate step that writes the entries in the ata_scsi_rbuf buffer, this
solution writes to the data-out buffer using sg_miter, which maps each
segment with kmap_atomic (SG_MITER_ATOMIC), so it's highmem- and
multi-segment-safe, and it's usable from the non-sleeping
command-submission path (unlike the page_address() access that
ata_scsi_rbuf originally replaced).
A 512-byte-sector device still uses a single page, so its behaviour is
unchanged.
Add ata_id_dsm_max_pages() to read IDENTIFY DEVICE word 105.
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Modify the existing libata.force parameters "max_sec_128" and
"max_sec_1024" to use the generic ATA_QUIRK_MAX_SEC quirk rather than
individual quirks.
This also allows us to remove the individual quirks ATA_QUIRK_MAX_SEC_128
and ATA_QUIRK_MAX_SEC_1024.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add a new quirk ATA_QUIRK_MAX_SEC, which has a separate table with device
specific values.
Convert all existing ATA_QUIRK_MAX_SEC_XXX device quirks in
__ata_dev_quirks to the new format.
Quirks ATA_QUIRK_MAX_SEC_128 and ATA_QUIRK_MAX_SEC_1024 cannot be removed
yet, since they are also used by libata.force, which functionally, is a
separate user of the quirks. The quirks will be removed once all users
have been converted to use the new format.
The quirk ATA_QUIRK_MAX_SEC_8191 can be removed since it has no equivalent
libata.force parameter.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- The DELLBOSS VD SATA controller times out when sending I/Os of size
4096 KiB or larger, even though it claims LBA48 support, which per
the ACS standard requires support for a maximum command size of
65535 sectors, i.e. 32 MiB - 512. Thus, quirk the device so that it
sets a lower maximum command size (me)
* tag 'ata-6.19-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Quirk DELLBOSS VD max_sectors
ata: libata: Move quirk flags to their own enum
|
|
Commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") increased
the default max_sectors_kb from 1280 KiB to 4096 KiB.
DELLBOSS VD with FW rev MV.R00-0 times out when sending I/Os of size
4096 KiB.
Enable ATA_QUIRK_MAX_SEC, with value 8191 (sectors) for this device,
since any I/O with more sectors than that lead to I/O timeouts.
With this, the DELLBOSS VD SATA controller is usable again.
Cc: stable+noautosel@kernel.org # depends on Move quirk flags to their own enum
Fixes: 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org
Reported-by: Ilia Baryshnikov <qwelias@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704
Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
A CDL timeout for policy 0xF is defined as a NCQ error, just with a CDL
specific sk/asc/ascq in the sense data. Therefore, the existing code in
libata does not need to be modified to handle a policy 0xF CDL timeout.
For Command Duration Limits policy 0xD:
The device shall complete the command without error with the additional
sense code set to DATA CURRENTLY UNAVAILABLE.
Since a CDL timeout for policy 0xD is not an error, we cannot use the NCQ
Command Error log (10h).
Instead, we need to read the Sense Data for Successful NCQ Commands log
(0Fh).
In the success case, just like in the error case, we cannot simply read a
log page from the interrupt handler itself, since reading a log page
involves sending a READ LOG DMA EXT or READ LOG EXT command.
Therefore, we add a new EH action ATA_EH_GET_SUCCESS_SENSE. When a command
completes without error, and when the ATA_SENSE bit is set, this new action
is set as pending, and EH is scheduled.
This way, similar to the NCQ error case, the log page will be read from EH
context.
An alternative would have been to add a new kthread or workqueue to handle
this. However, extending EH can be done with minimal changes and avoids the
need to synchronize a new kthread/workqueue with EH.
Co-developed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-20-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for the ATA feature control sub-page of the control mode page
to enable/disable the command duration limits feature using the cdl_ctrl
field of the ATA feature control sub-page.
Both mode sense and mode select translation are supported. For mode sense,
the ata device flag ATA_DFLAG_CDL_ENABLED is used to cache the status of
the command duration limits feature. Enabling this feature is done using a
SET FEATURES command with a cdl action set to 1 when the page cdl_ctrl
field value is 0x2 (T2A and T2B pages supported). If this field is 0, CDL
is disabled using the SET FEATURES command with a cdl action set to 0.
Since a device CDL and NCQ priority features should not be used
simultaneously, ata_mselect_control_ata_feature() returns an error when
attempting to enable CDL with the device priority feature enabled.
Conversely, the function ata_ncq_prio_enable_store() used to enable the use
of the device NCQ priority feature through sysfs is modified to return an
error if the device CDL feature is enabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-18-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the supported capabilities identify device data log page to detect if a
device supports the command duration limits feature. For devices supporting
this feature, set the device flag ATA_DFLAG_CDL. To support SCSI-ATA
translation, retrieve the command duration limits log page 18h and cache
this page content using the cdl array added to the ata_device data
structure.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-15-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This function was renamed from lba_capacity_is_ok()() and moved from
drivers/ide/ to <linux/ata.h> but it never got used by libata, thus it
became useless after drivers/ide/ removal...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
This function was renamed from ide_id_to_hd_driveid() and moved from
drivers/ide/ to <linux/ata.h> but it never got used by libata, thus it
became useless after drivers/ide/ removal...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_flush_ext_enabled().
ata_id_has_flush_ext() is left unmodified, since this extra supported bit
(Bit 13 of word 86) is simply a copy of the bit that ata_id_has_flush_ext()
already checks (Bit 13 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_flush_enabled().
ata_id_has_flush() is left unmodified, since this extra supported bit
(Bit 12 of word 86) is simply a copy of the bit that ata_id_has_flush()
already checks (Bit 12 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_lba48_enabled().
ata_id_has_lba48() is left unmodified, since this extra supported bit
(Bit 10 of word 86) is simply a copy of the bit that ata_id_has_lba48()
already checks (Bit 10 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
The problem with ata_id_has_dipm() is that the while it performs a
check against 0 and 0xffff, it performs the check against
ATA_ID_FEATURE_SUPP (word 78), the same word where the feature bit
is stored.
Fix this by performing the check against ATA_ID_SATA_CAPABILITY
(word 76), like required by the spec. The feature bit check itself
is of course still performed against ATA_ID_FEATURE_SUPP (word 78).
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: ca77329fb713 ("[libata] Link power management infrastructure")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 5b01e4b9efa0 ("libata: Implement NCQ autosense")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 65fe1f0f66a5 ("ahci: implement aggressive SATA device sleep support")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
ACS-5 section
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
states that:
If bit 15 of word 86 is set to one, bit 14 of word 119 is set to one,
and bit 15 of word 119 is cleared to zero, then word 119 is valid.
If bit 15 of word 86 is set to one, bit 14 of word 120 is set to one,
and bit 15 of word 120 is cleared to zero, then word 120 is valid.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Currently, ata_id_sense_reporting_enabled() and
ata_id_has_sense_reporting() both check bit 15 of word 86,
but neither of them check that bit 14 of word 119 is set to one,
or that bit 15 of word 119 is cleared to zero.
Additionally, make ata_id_sense_reporting_enabled() return false
if !ata_id_has_sense_reporting(), similar to how e.g.
ata_id_flush_ext_enabled() returns false if !ata_id_has_flush_ext().
Fixes: e87fd28cf9a2 ("libata: Implement support for sense data reporting")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Add support to discover if an ATA device supports the Concurrent
Positioning Ranges data log (address 0x47), indicating that the device
is capable of seeking to multiple different locations in parallel using
multiple actuators serving different LBA ranges.
Also add support to translate the concurrent positioning ranges log
into its equivalent Concurrent Positioning Ranges VPD page B9h in
libata-scsi.c.
The format of the Concurrent Positioning Ranges Log is defined in ACS-5
r9.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ata.h uses BIT() macro, hence bits.h must be included. Otherwise
there is no need to have kernel.h included, I do not see any
direct users of it in ata.h. Hence replace inclusion of kernel.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210409153456.87798-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version this program is distributed in the hope that it will
be useful but without any warranty without even the implied warranty
of merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program see
the file copying if not write to the free software foundation 675
mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.342335923@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two other values for SET MAX feature field according to ata
protocol. So definite them.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ATA-8 and later mirrors the TRUSTED COMPUTING SUPPORTED bit in word 48 of
the IDENTIFY DEVICE data. Check this before issuing a READ LOG PAGE
command to avoid issues with buggy devices. The only downside is that
we can't support Security Send / Receive for a device with an older
revision due to the conflicting use of this field in earlier
specifications.
tj: The reason we need this is because some devices which don't
support READ LOG PAGE lock up after getting issued that command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This allows us to use the generic OPAL code with ATA devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The libata documentation is now using ReST. Update references
to it to point to the new place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This was already disabled a while ago because it caused I/O errors,
and it's severly getting into the way of the discard / write zeroes
rework.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This patch checks to see if an ATA device supports NCQ command priorities.
If so and the user has specified an iocontext that indicates
IO_PRIO_CLASS_RT then we build a tf with a high priority command.
This is done to improve the tail latency of commands that are high
priority by passing priority to the device.
tj: Removed trivial ata_ncq_prio_enabled() and open-coded the test.
Signed-off-by: Adam Manzanares <adam.manzanares@hgst.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
SATA drives may support write same via SCT. This is useful
for setting the drive contents to a specific pattern (0's).
Translate a SCSI WRITE SAME 16 command to be either a DSM TRIM
command or an SCT Write Same command.
Based on the UNMAP flag:
- When set translate to DSM TRIM
- When not set translate to SCT Write Same
Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
|
|
Safely overwriting the attached page to ATA format from the SCSI formatted
variant.
Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
|
|
This avoid the need to always translate between the two in ata_prot_flags
and generally cleans up the taskfile protocol usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since we set ATA_MAX_SECTORS_LBA48 to 65535 to avoid the corner case
in some drives that commands with "count" set to 0000h (which
reprsents 65536) does not work as expected, lba_48_ok(), which is
used for number-of-blocks checking when libata pack commands, should
use the same limit as well. In fact, there is no reason for the two
functions not to use the macros anyway.
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add a new taskfile protocol ATA_PROT_NCQ_NODATA to handle
ATA NCQ NO-DATA commands correctly.
And fixup ata_scsi_zbc_out_xlat() to use it.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently libata statically allows only 1-block (512-byte) payload
for each TRIM command. Each payload can carry 64 TRIM ranges since
each range requires 8 bytes.
It is silly to keep doing the calculation (512 / 8) in different
places. Hence, define the new ATA_MAX_TRIM_RNUM for the result.
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Without this fix, the DRA bit of the caching mode page would not
be updated when the read look-ahead feature is toggled (e.g. with
`smartctl --set`), but will only be until, for example, the write
cache feature is touched.
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata ZAC support from Tejun Heo:
"This contains Zone ATA Command support for Shingled Magnetic Recording
devices.
In addition to sending the new commands down to the device, as ZAC
commands depend on getting a lot of responses from the device, piping
up responses is beefed up too. However, it doesn't involve changes to
libata core mechanism or its interaction with upper layers, so I'm not
expecting too many fallouts.
Kudos to Hannes for driving SMR support"
* 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits)
libata: support host-aware and host-managed ZAC devices
libata: support device-managed ZAC devices
libata: NCQ encapsulation for ZAC MANAGEMENT OUT
libata: Implement ZBC OUT translation
libata: implement ZBC IN translation
libata: fixup ZAC device disabling
libata-scsi: Generate sense code for disabled devices
libata-trace: decode subcommands
libata: Check log page directory before accessing pages
libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT
libata: Separate out ata_dev_config_ncq_send_recv()
libata/libsas: Define ATA_CMD_NCQ_NON_DATA
libsas: enable FPDMA SEND/RECEIVE
libata: do not attempt to retrieve sense code twice
libata-scsi: Set information sense field for invalid parameter
libata-scsi: set bit pointer for sense code information
libata-scsi: Set field pointer in sense code
scsi: add scsi_set_sense_field_pointer()
libata: Implement control mode page to select sense format
libata-scsi: generate correct ATA pass-through sense
...
|
|
Byte 69 bits 0:1 in the IDENTIFY DEVICE data indicate a
host-aware ZAC device.
Host-managed ZAC devices have their own individual signature,
and to not set the bits in the IDENTIFY DEVICE data.
And whenever we detect a ZAC-compatible device we should
be displaying the zoned block characteristics VPD page.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Device-managed ZAC devices just set the zoned capabilities field
in INQUIRY byte 69 (cf ACS-4). This corresponds to the 'zoned'
field in the block device characteristics VPD page.
As this is only defined in SPC-5/SBC-4 we also need to update
the supported SCSI version descriptor.
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add NCQ encapsulation for ZAC MANAGEMENT OUT and evaluate
NCQ Non-Data log pages to figure out if NCQ encapsulation
is supported.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
ZAC drives implement a 'ZAC Management Out' command template,
which maps onto the ZBC OUT command.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
ZAC drives implement a 'ZAC Management In' command template,
which maps onto the ZBC IN command.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some commands like FPDMA RECEIVE or NCQ NON DATA can encapsulate
other commands to NCQ transport. So decode the subcmds, too.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When reading the NCQ Send/Recv log it might actually not
supported, thereby causing irritating messages
'READ LOG DMA EXT failed'.
Instead we should be reading the log directory first to
figure out if the log is actually supported before trying
to access it.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
