| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The kselftest_harness.h file contains modern helpers to build tests
for kselftest. Dropping the custom test helpers in ipv6_flowlabel_mgr
in favor of the harness makes tests more legible and conforms to the
structure of the latest selftests. It also enforces the TAP standard.
Another change made to the structure of the ipv6_flowlabel_mgr test
file was the removal of parse_opts. The supported opts were already
unused: the binary is listed in TEST_GEN_FILES, and is driven solely
by ipv6_flowlabel.sh via "./ipv6_flowlabel_mgr", which never passed -l
or -v. Dropping the -l gate means the two checks it previously guarded
(each with a 13-second sleep, ~26 seconds total) are now
unconditionally enabled on every run instead of never running at all.
The TH_LOG calls and code comments now cover the information that the
removed, custom -v flag used to print.
Finally, FIXTURE_SETUP(flowlabel) ensures each test gets its own
isolated network namespace. The previously added setup() helper was
dropped to conform to the netns setup pattern used in icmp_rfc4884.c.
disable_flowlabel_consistency() was moved next to reflect_flag, the
only test that calls it, and now uses SKIP() instead of an ad hoc
[INFO] message when the sysctl cannot be disabled.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-6-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the source code, flowlabel_consistency must be
deactivated for the IPV6_FL_F_REFLECT flag to work. Since
ipv6_flowlabel_mgr now runs in its own network namespace, do this
directly from the test binary. Attempt to disable
net.ipv6.flowlabel_consistency and skip the reflect test if that
fails. A disabled flowlabel_consistency does not affect the remaining
features being tested on the file, and failing to disable is not fatal
and skips the reflect test only.
The previously defined tcp_listen and tcp_connect helpers were reused,
since the connection flow required for REFLECT validation is very
similar to REMOTE.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-5-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Have ipv6_flowlabel_mgr create and configure its own network
namespace (unshare(CLONE_NEWNET) + bring up lo), the same way
ipv6_fragmentation.c and icmp_rfc4884.c already do, instead of
relying on the in_netns.sh wrapper script.
The setup can then be reused across tests through fixtures and
provide isolated network environments for each test in the case
of a future adoption of kselftest_harness.
It also avoids the leak of modifications to the netns in case the
user runs the test file directly, outside the wrapper and without
the in_netns.sh file.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-4-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This flag retrieves the flow label seen by the socket at connection
setup via a getsockopt query. Therefore, the validation of this flag
requires a brief connection setup (source code for flow label shows
it must be TCP).
The simple TCP connection logic was wrapped inside two simple helpers,
because there are other uncovered features of flow label mgr that
could benefit from it (such as IPV6_FL_F_REFLECT).
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-3-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RENEW was the only flow label action without selftests coverage.
Assert renew returns no error on correct usage and fails for labels
that do not exist.
This test is based on the previously implemented EXCL share test,
which demonstrates that a new flow label with the same value can be
created after the linger period. Renew is used here to show that a
flow label can last longer and block a new flow label creation after
the previous linger time. This test, however, demands sleep during
execution, and should be placed as a conditional test under the -l
option.
The addition of the expect_fail_errno helper is necessary to assert
the corresponding error when a function can fail in multiple ways.
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Link: https://patch.msgid.link/20260807220942.421382-2-marcelomspessoto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
read_exports() reports the offending line number when it fails to parse
Module.symvers. The counter is initialized to 1 but never incremented,
so every error blames line 1 regardless of where the bad line is.
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/133e16bb0c7cb916f10bbfb017eba525449ad1d6.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
EXPORT_SYMBOL_FOR_MODULES() puts a symbol in a "module:<names>"
namespace, which the module loader grants access to by matching the
importing module's name against that list.
klp_reloc_needed() only creates a klp reloc for module-owned exports; a
vmlinux export gets a normal reloc. For a vmlinux symbol exported with
EXPORT_SYMBOL_FOR_MODULES(), using a normal reloc results in a modpost
failure in klp-build:
ERROR: modpost: module livepatch-foo uses symbol mpol_shared_policy_lookup from namespace module:kvm, but does not import it.
And the modpost error is correct: even with that error removed, the
patch module would fail to load:
livepatch_foo: module uses symbol (mpol_shared_policy_lookup) from namespace module:kvm, but does not import it.
livepatch_foo: Unknown symbol mpol_shared_policy_lookup (err -22)
Treat it like an unexported symbol by using a klp reloc.
Note this only affects "module:" namespaces. Ordinary namespaced
exports continue to work with normal relocs thanks to copy_import_ns(),
which propagates the patched object's import_ns tags to the patch
module.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/6a6608f4-0a05-4d75-8b7f-edddfac9c5d4@redhat.com
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/fe5a00818e06ec613344d41d5944de054fcd8832.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
klp_reloc_needed() returns true for module exports to support
late-module patching. However, clone_reloc_klp() unconditionally
rejects symbols without a twin (i.e., new references added by the
patch), even when the symbol is a known export from Module.symvers.
Relax the check: allow new references to exported symbols by only
erroring on !twin when there is no export. The export metadata from
Module.symvers provides sufficient context to emit the klp-relocation
without a twin.
For a module export that isn't sufficient on its own though, as the
resulting klp relocation will only be resolved at patch-enable time if
the exporting module is loaded.
If the original (unpatched) module already depends on the exporting
module, the dependency is safe: the module loader ensures the dependency
is satisfied before the patched module can be loaded, so the
klp relocation target will exist.
However, if the patch introduces a reference to a module that the
original doesn't depend on, there is no such guarantee. The exporting
module could be absent or could be unloaded at any time, leading to a
relocation failure or use-after-free.
So also add a build-time check: when a new symbol reference (no twin)
targets a module export, verify that the original module already has at
least one UNDEF symbol resolving to that same exporting module. If not,
error out with a diagnostic message.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/e0d725acb4774747f0e271308b4ca33daae2d5db.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
While cloning a reloc, klp diff calls find_export() to determine whether
the referenced symbol is exported. That decides whether the reference
needs a klp reloc, which object the klp symbol belongs to, and whether
the symbol's data needs to be copied into the patch module.
But find_export() matches purely on symbol name, so a static function or
variable which happens to share its name with an export is mistaken for
a reference to that export:
- klp_reloc_needed() creates a klp reloc pointing at the exporting
module's symbol rather than the local one. For a vmlinux export it
skips the klp reloc altogether, leaving a normal reloc which the
module loader resolves to the vmlinux symbol.
- clone_reloc() treats the symbol as external and clones it without
its data, leaving a dangling reference.
- validate_special_section_klp_reloc() attributes a static branch or
call key to the wrong module, and for a vmlinux export skips the
unsupported-key check entirely.
Exports are always global, so ignore local symbols in find_export().
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/dafc7c017d1f62e2190a20dc84a52fbfc4c70210.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
A klp relocation section is .klp.rela.<objname>.<secname>, where objname
is the object being patched.
klp-build wrongly derives objname from where the referenced symbol
lives, not where it's referenced. For a cross-module reference like
patched can_isotp code calling can.ko's can_rx_unregister(), that gives
.klp.rela.can..text rather than .klp.rela.can_isotp..text. Unless the
patch happens to patch can.ko as well, the relocation never gets applied
and the call goes off into the weeds.
Name the intermediate section __klp_relocs.<objname> so post-link can
read the patched object's name from there.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/20260720145658.1103243-2-joe.lawrence@redhat.com
Acked-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/ee93a08f3e55e76ffa67d04e283917ddaa893f09.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Explicitly disallow the patching and referencing of init code/data.
Otherwise it could potentially introduce some odd edge cases depending
on whether the target object's init section has been freed yet (note
that the init code still exists in the target module when doing late
module patching).
Such edge cases include sympos calculation and the patching and/or
referencing of non-existent (init-freed) code/data. Not to mention the
inherent differences in behavior that occur when the init code is only
patched *some* of the time depending on module loading order or kernel
config.
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/516e14f84cfbffa27dc19d3dcf35097504097966.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
An x86 alternative with an empty replacement, e.g. the second entry of
ALTERNATIVE_2("orig", "repl", ft1, "", ft2)
has a replacementlen of zero. Its replacement offset still gets a
relocation, but the label it points at is the end of the previous
replacement, which is also the beginning of the *next* alternative's
replacement. The value is meaningless; get_alt_entry() already ignores
it for that reason.
klp diff doesn't ignore it. When such an alternative belongs to a
changed function, cloning its relocations drags in the unrelated
neighboring replacement, along with everything that replacement
references. On an x86 clang/lto build an empty alternative in
meminfo_proc_show() pulled in the replacement of an alternative in
proc_kcore_init(), silently emitting a klp relocation against init text
which has long since been freed by the time the patch is applied.
Add arch_alt_ignore_new_reloc() and skip such relocations when cloning.
This has to be arch specific: on arm64 a zero-length replacement instead
identifies an alternative callback, whose replacement offset points at
the callback function and must be preserved.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/7a885b70974795c3417f3358869e62aafd4ef783.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
create_fake_symbols() sizes each ANNOTATE_DATA_SPECIAL entry from the
offset of the next annotation, falling back to the end of the section
for the last entry. But the last entry is detected by a zero size,
which also happens for an *empty* entry: ALTERNATIVE(oldinstr, "", ft)
still annotates its zero-length replacement, at the same offset as the
next entry's annotation.
So every empty replacement gets a fake symbol spanning the entire rest
of .altinstr_replacement. That's harmless today only because
find_symbol_containing() picks the smaller of two overlapping symbols.
Track whether a next annotation was found rather than inferring it from
the size. A zero-length fake symbol is fine: find_symbol_containing()
skips those, so the properly sized symbol at the same offset still wins.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/913e691c5009397df832c7c9a18cd5cf71b42737.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Testing klp-build with arm64 produced the following linker error during
the original kernel build:
`__notrim.1' referenced in section `.klp.symid' of vmlinux.o: defined in discarded section `.no_trim_symbol' of vmlinux.o
symbol_get() puts a static __notrim[] in .no_trim_symbol, which GCC
names __notrim.1, __notrim.2, etc. Two or more built-in translation
units calling symbol_get() thus produce duplicate names, resulting in
corresponding .klp.symid references which trigger the above error.
Add .no_trim_symbol to the discarded section list so its symbols don't
get symids.
Note this issue is not specific to arm64: it just needs two built-in
symbol_get() callers. arm64 trips over it easily because it has KVM
always compiled in vmlinux, whereas on x86 it's typically a module.
Fixes: 029223d30162 ("objtool/klp: Add .klp.symid for sympos disambiguation")
Acked-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/5a3cc4cded743167dd0878220201d80f7e48e5d7.1786138493.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add a path where RCU protection reaches zero and then starts again.
The iterator is untrusted after this gap and must be rejected.
Signed-off-by: Ning Ding <dingning04@gmail.com>
Link: https://patch.msgid.link/20260811035955.132989-3-dingning04@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Correct "patch" or "patches" to "path" or "paths" in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260806055634.1293294-1-rdunlap@infradead.org>
|
|
While validating recent CXL ABI documentation updates with
get_abi.py, every decoderX.Y entry was reported as undocumented.
The placeholder conversion mishandles adjacent index placeholders,
producing patterns that cannot match the corresponding sysfs paths.
As a result, valid ABI entries are reported as undocumented.
Handle adjacent placeholders independently so generated patterns match
the documented paths. This fixes decoderX.Y entries in the CXL ABI and
other ABI documentation that uses the same naming convention.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <cc893dca3aaa3ec833ba70d1f32c3e7342b7faf2.1786139549.git.alison.schofield@intel.com>
|
|
While validating recent CXL ABI documentation updates with
get_abi.py, the 'undefined' mode was found to abort instead of
reporting undocumented ABI entries.
Older Python releases raise re.error, while newer releases expose
re.PatternError. Catching the compatible re.error exception handles
both cases.
Use re.error so the scan continues and reports the remaining
results.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <9f6fa7a9aa6ba9a26b484b911976713356b3fd44.1786139549.git.alison.schofield@intel.com>
|
|
clock_gettime()
Both these functions can fail.
The first calls to those functions are already checked and result in
KSFT_SKIP.
If they start failing afterwards unexpectedly, report a hard error.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-17-910cbd485390@linutronix.de
|
|
The test currently defines its own custom error numbers.
These mirror the semantics from the standard KFST_* constants.
To make the code easier to read, use the standard result constants.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-16-910cbd485390@linutronix.de
|
|
The test relies on the numeric values of the clockids.
As not all clocks are meant to be tested, this requires skipping some
clocks unconditionally, cluttering the result.
Use an equivalent, explicit list instead.
In addition to CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID and
CLOCK_HWSPECIFIC which were unconditionally skipped before, this also
unconditionally skips CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE and
CLOCK_REALTIME_COARSE. clock_nanosleep() is not supported for those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-15-910cbd485390@linutronix.de
|
|
Use the predefined symbol to make the code easier to understand.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-14-910cbd485390@linutronix.de
|
|
Currently the test for the sleep functionality itself and the one for
the remaining time are reported together. This makes the test output a
bit confusing, especially as the upcoming tests for auxiliary clocks
will have different results between the two parts.
Report each test part on its own.
This also allows continuing testing other clocks after a single one
has failed.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-13-910cbd485390@linutronix.de
|
|
An upcoming patch will remove the early exit on failure of a single
testcase. If a test fails because a timeout timer could not be deleted,
then that timeout timer might interfere with the following tettcases.
Exit the whole test case with a clear error message in this case.
Other failures are not problematic:
* If timer_settime() fails, a harmless unarmed timer is left around.
* The SIGALRM handler reconfigured for each call to
nanosleep_test_remaining() anyways.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-12-910cbd485390@linutronix.de
|
|
main()
Make the code easier to read by avoiding a goto.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-11-910cbd485390@linutronix.de
|
|
The test currently defines its own custom error numbers.
These mirror the semantics from the standard KFST_* constants.
To make the code easier to read, use the standard result constants.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-10-910cbd485390@linutronix.de
|
|
The test relies on the numeric values of the clockids.
As not all clocks are meant to be tested, this requires skipping some
clocks unconditionally, cluttering the result.
Use an equivalent, explicit list instead.
In addition to CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID and
CLOCK_HWSPECIFIC which were unconditionally skipped before, this also
unconditionally skips CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE and
CLOCK_REALTIME_COARSE. clock_nanosleep() is not supported for those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-9-910cbd485390@linutronix.de
|
|
The padding of the clock name is pointless as nothing else is printed.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-8-910cbd485390@linutronix.de
|
|
Replace the many repetitions of custom clockid_t to string translation
with the clock_name() helper from clock-helpers.h.
Also drop the custom ?SEC_PER_?SEC definitions.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-7-910cbd485390@linutronix.de
|
|
Multiple selftests duplicate various clock-related functionality.
Add a new header to collect and deduplicate those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-6-910cbd485390@linutronix.de
|
|
Add any localversion* text to the kernel version string
so that the docs index (home) page accurately indicates what
the docs build version is.
E.g.:
7.2.0-rc6-next-20260807
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260808045331.326769-1-rdunlap@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- Convert ELF entry point to file offset in uprobe test
Convert the ELF entry point address (e_entry) to a file offset using
LOAD segment headers in add_remove_uprobe test. This fixes uprobe
registration failures (-EINVAL) on non-PIE executables where vaddr
exceeds file size.
* tag 'probes-fixes-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Convert ELF entry point to file offset in uprobe test
|
|
Nothing in this file splices a socket whose last decrypt failed, so
the check that fails tls_sw_splice_read() on a broken connection can
be removed without a test noticing. Such a splice hands the
application plaintext that recvmsg() and read_sock() already refuse
to return.
Extend the bad_auth pattern. Corrupt an authenticated record, confirm
recvmsg() reports EBADMSG, then splice the same socket and require
EBADMSG again. A synchronous decrypt fails again on the still-queued
record, so only an async decrypt reaches EBADMSG through the
recorded-failure check alone.
bad_auth builds the same corrupted record, so its construction moves
into a helper the two tests share.
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-2-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
reuseport_bpf_numa case failed when testing on a platform with CXL
memory:
#./reuseport_bpf_numa
---- IPv4 UDP ----
send node 0, receive socket 0
./reuseport_bpf_numa: failed to pin to node: Invalid argument
The root cause is that the platform has 2 numa nodes: node 0 has
both cpu and memory, while node 1 is a CXL node which only has
memory, and caused numa_run_on_node() to fail.
Add sanity check to skip cpuless numa node for the numa binding test.
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260807002436.43991-1-feng.tang@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
include/linux/objtool_types.h
Sync up the kernel and tooling headers to fix this build warning:
Warning: Kernel ABI header at 'tools/include/linux/objtool_types.h' differs from latest version at 'include/linux/objtool_types.h'
Fixes: 6e5716b187fa ("objtool: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files")
Cc: Thomas Huth <thuth@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Generated YNL getter code does not check the return value of malloc() and
calloc() before passing the resulting pointer to memcpy(). This could lead
to a NULL pointer dereference on memory allocation failure.
Updated the C code generator to check for allocation failures and to return
an error code in getters.
Signed-off-by: Thaison Phan <thaisonphan@google.com>
Link: https://patch.msgid.link/20260807171500.7188-3-thaisonphan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Static analysis detected code paths where freeing a dump list after early
errors when creating the corresponding dump list like in ynl_exec_dump()
can result in a null pointer dereference since the first node in the
ynl_dump_state would still be zero initialized. To prevent this potential
problem updated the ynl c generation script to check for a NULL pointer
before continuing to free the nodes in a dump list.
Signed-off-by: Thaison Phan <thaisonphan@google.com>
Link: https://patch.msgid.link/20260807171500.7188-2-thaisonphan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kernel.ftrace_enabled=0 is now refused on kernels that deprecate the
knob, so the old disable/reload flow no longer applies there. Probe
for this with ftrace_disable_supported() and keep the full original
scenario (disable, fail to load a livepatch, re-enable, load, confirm
disable is refused while loaded) on kernels where it still works;
otherwise just confirm the write is refused.
Link: https://patch.msgid.link/20260806153000.4184871-3-andrey.grodzovsky@crowdstrike.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Joe Lawrence <joe.lawrence@redhat.com>
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
bond_reset() waits up to 2 seconds for IPv6 connectivity.
With default settings DAD itself may take almost 2 seconds,
causing flakes on debug builds. It used to flake once or
twice a week, recently it started failing once a day.
Probably some downstream changes to scheduler, or our machines
go busier.
A lot of selftests already use nodad, let's use nodad in bonding, too.
I don't see an obvious reason why DAD would be important to the test.
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260808162345.2442594-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ETF qdiscs drops traffic without a socket or txtime. Even with
parameter skip_sock_check regular traffic is affected by ETF.
This test ran fine when run manually in a pure software environment.
But with drv-net across two hosts tests fail as early as when calling
cfg.remote.deploy due to effectively losing connectivity.
Isolate the intended test traffic:
- mark that with SO_MARK 100
- install a regular permissive root prio qdisc for background traffic
- install the ETF qdisc as leaf
- install a filter that only directs SO_MARK 100 traffic to this leaf
Technically other high prio traffic will map onto this leaf based on
ToS band mapping too. But that is immaterial in practice.
Fixes: 5c6baef3885c ("selftests: drv-net: convert so_txtime to drv-net")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260808160129.890119-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices refresh the statistics exposed via ethtool only
periodically, every stats-block-usecs (as reported by ethtool -c).
ethtool_std_stats and ethtool_rmon sample the counters immediately
after generating traffic, so on such devices they can read stale
values and fail with a delta short of the packets just sent.
Add a hw_stats_settle() helper which sleeps for 1.25x the configured
stats-block-usecs (defaulting to 20ms when the device reports no, or
a zero, period). Use it for ethtool std stats and RMON.
The 1.25x/20msec heuristic matches what the Python tests do.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260808163653.2460381-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mausezahn defaults to sending packets back to back at the maximum rate,
which can cause packet loss, especially if receiver is running a debug
kernel. Space the generated packets out (-d 10usec), like ethtool_rmon
already does.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260808163653.2460381-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The adaptive-rx and adaptive-tx checks use 'ethtool -c | grep -q' under
'set -o pipefail'. grep -q exits as soon as it finds a match, which can
happen before ethtool finishes writing its output. When that occurs,
ethtool receives SIGPIPE causing (uninformative):
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# FAILED 1/22 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
This happens on debug kernels in NIPA, ~4% of the time.
Link: https://patch.msgid.link/20260808163416.2456810-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a tdc case covering the leak fixed by the previous patch.
The test attaches "action ct" to a clsact ingress chain and injects ten
IPv6 frames whose nexthdr says hop-by-hop but which carry nothing after
the 40-byte header, so ipv6_find_hdr() fails and
tcf_ct_ipv6_is_fragment() returns -EPROTO.
Before the fix act_ct returned TC_ACT_CONSUMED for these packets, so
tc_run() never reached its TC_ACT_SHOT arm and the clsact drop counter
stayed at zero while the skbs leaked. After the fix the packets are
dropped properly and the counter reflects them, which is what the test
matches on:
before: Sent 476 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
after: Sent 400 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-2-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.3-arena-args
Pull bpf-next d114bb989367 ("Merge branch
'add-arena-argument-support-to-kfuncs-and-struct_ops'") to make the __arena
and __arena__nullable kfunc and struct_ops argument suffixes available. The
suffixed arguments will be used to convert sched_ext kfuncs and struct_ops
callbacks that currently pass arena pointers as scalars and rebase them by
hand.
|
|
The commit message for af8c8a450bf4 ("selftests: net: Add FIN_ACK
processing order related latency spike test") states: "if the latency
is larger than 1 second (spike), print a message". However the code
uses a threshold of 100000 us (100 ms), not 1000000 us (1 s).
The lower threshold causes false positives on slower hardware where
normal connection latency occasionally exceeds 100 ms but never
approaches the 1 s spike that indicates the actual FIN/ACK race bug.
Fix the threshold to match the documented intent.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brian Grech <bgrech@redhat.com>
Link: https://patch.msgid.link/20260806151645.4172900-1-bgrech@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The attrs are where the affinity scope lives, and a per-cpu workqueue
will need one once per-cpu becomes a scope rather than a separate
backend. Allocate them unconditionally.
wq_dump.py used a non-NULL wq->attrs as its test for an unbound
workqueue, which no longer holds; test WQ_UNBOUND there instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The unbound prefix says which workqueues currently have the field rather
than what it holds, and the next patch allocates it for every workqueue.
Rename it first so that change stays a single line.
tools/workqueue/wq_dump.py reads the field by name, so rename it there
too.
wq_sysfs_unbound_attrs[] keeps its name: it is the set of sysfs files
that only unbound workqueues expose.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
exit.c does not check the return value of exit__open(). If it returns
NULL, which happens when the skeleton wrapper fails to allocate the
object or open the BPF ELF, the very next line dereferences it via
SCX_ENUM_INIT(). That macro expands to SCX_ENUM_SET(), which accesses
skel->rodata, causing a NULL pointer dereference.
Every other selftest guards this with SCX_FAIL_IF(!skel, ...); exit.c
is the only one missing it.
Fixes: a5db7817af78 ("sched_ext: Add selftests")
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cpuset selftests use awk -e to parse cgroup mount points. This
works with gawk, but mawk rejects the option. In test_cpuset_prs.sh,
this leaves CGROUP2 empty and causes the test to skip as if cgroup v2
were not mounted. The same non-portable invocation exists in the cpuset
v1 hotplug test.
The scripts only need to pass a single awk program. Use the standard awk
invocation without -e so mount point detection works with awk
implementations that do not support the gawk extension.
Fixes: a8c52eba880a ("kselftest/cgroup: Add cpuset v2 partition root state test")
Fixes: 812c5945bdb8 ("cgroup/cpuset: Add test_cpuset_v1_hp.sh")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ridong Chen <ridong.chen@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
