| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Frames for which macb_pad_and_fcs() supplies the FCS have four FCS
bytes appended, and TX completion then accounts the grown skb->len.
tx_bytes is defined to exclude the FCS, so these frames are reported
four bytes too large.
Track only the number of FCS bytes appended in software, 0 or
ETH_FCS_LEN, and subtract that from skb->len at completion. skb->len
already reflects the padded length by then, so there is nothing else
to store. macb_pad_and_fcs() already returns 0 on every non-error
path. Return the FCS length from there instead, rather than
recomputing the same check in the caller. BQL stays on the padded
skb->len that netdev_tx_sent_queue() saw.
Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260831113128.1678674-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reported-by: syzbot+74f338e09f1ef3ee6457@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a96219e.04428c52.29b18.0001.GAE@google.com/T/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260901005550.2042357-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case.
Fixes: b08123684bd5 ("net: bridge: mcast: install S,G entries automatically based on reports")
Cc: stable@vger.kernel.org
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Reported-by: TencentOS Corvus AI <corvus@tencent.com>
Signed-off-by: Jun Yang <junvyyang@tencent.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260831111330.199543-1-junvyyang@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond->curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent iteration releasing the active
slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL)
is skipped. Consequently, bond_alb_handle_active_change() is never called
to decrement the promiscuity counter, permanently leaking promiscuous
mode on the physical device after bond teardown.
When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets
bond->curr_active_slave to NULL. We only need to avoid selecting a new
active slave when all == true. Replace the if (all) branch with
if (!all && oldcurrent == slave).
Fixes: 0896341a44bf ("bonding: fix bond_release_all inconsistencies")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260831203042.164466-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case for a BPF_PSEUDO_FUNC load instruction that references
the entry function of the program it belongs to. W/o the previous
patch the verifier accepts this program thus allowing a runtime call
at a bogus address. See previous patch for detailed description.
Main function needs to be marked with BTF_FUNC_STATIC for the test to
trigger the bug, the patch uses test_verifier harness instead of
test_prog because libbpf has no way to convey this.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260902233658.1186477-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementation, just assume that no useful
program needs main to be a sync or async callback and reject
BPF_PSEUDO_FUNC loads for the main subprogram.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260902233658.1186477-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__within_kprobe_blacklist() traverses kprobe_blacklist without holding
kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist()
removes blacklist entries and immediately frees them with kfree().
A concurrent call to within_kprobe_blacklist() can therefore dereference
freed memory.
Furthermore, within_kprobe_blacklist() can be called in atomic or
non-preemptible contexts where the sleeping kprobe_mutex cannot be taken.
Protect kprobe_blacklist with RCU. Use guard(rcu)() and
list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for
insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim
entries safely after a grace period.
Link: https://lore.kernel.org/all/178810004323.64882.16493230858653316962.stgit@devnote2/
Fixes: 376e242429bf ("kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260807155802.F06041F000E9@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.7-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
multiple probes
The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and
fprobe events) are created in traceprobe_define_arg_fields() by handing
the probe_arg name/type strings to trace_define_field(), which only
stores the pointers without copying. Those strings are owned by the
trace_probe and are freed when that probe is removed.
An event can have several probes attached. The field list is defined
only once, by the first probe that registers the event, but it is kept
alive by any surviving sibling probe. Deleting just that first probe by
symbol -
# primary A: fields are defined from A's args
echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events
# append B: shares A's event call
echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events
# delete only A (matched by symbol), B survives
echo '-:kprobes/ev vfs_read' >> kprobe_events
frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()),
but trace_probe_unlink() keeps the trace_probe_event because the probe
list is not empty. The event call stays registered via B while its
fields now reference freed memory. Any field lookup then reads it, e.g.
echo 'a1 == 1' > events/kprobes/ev/filter
BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0
Call Trace:
strcmp
trace_find_event_field
parse_pred
process_preds
create_filter
apply_event_filter
event_filter_write
field->name references parg->name (kstrdup'd, freed with the probe) and,
for array arguments, field->type references parg->fmt (kmalloc'd, freed
with the probe) - the scalar type otherwise points at the static
fmttype rodata, which is safe.
Have traceprobe_define_arg_fields() duplicate the name and type strings
and anchor the copies on the trace_probe_event, which embeds the event
call and outlives every individual probe; trace_probe_event_free()
releases them.
The reproducer above triggers reliably; the field lookup and the delete
both run under event_mutex, so this is a dangling reference after
removal rather than a race.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Link: https://lore.kernel.org/all/20260826030009.1855331-1-bsdhenrymartin@gmail.com/
Fixes: ca89bc071d5e4 ("tracing/kprobe: Add multi-probe per event support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Fix code block indentation introduced by commit f21834524025
("tracing/probes: Support field specifier option for typecast").
Link: https://lore.kernel.org/all/178827252027.123716.7095571176291547259.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
|
|
btf_find_struct_member() traverses into nested anonymous structures and
unions to find a struct member. However, get_bitoffset_of_field() in
trace_probe.c checked btf_type_kflag(type) using the outer parent type
instead of the actual anonymous structure/union that directly contains
the found member.
If the parent structure and anonymous structure have mismatched kflags
(e.g., the parent has kflag=0 while the anonymous structure has kflag=1
because it contains bitfields), the bitfield size encoded in the upper
8 bits of member->offset is erroneously treated as part of the byte/bit
offset, corrupting the resolved offset and failing to set last_bitsize.
Similarly, btf_find_struct_member() pushed anonymous member offsets
onto anon_stack without masking BTF_MEMBER_BIT_OFFSET() when kflag is set.
To fix this problem, update btf_find_struct_member() to return actual
containing structure/union type via member_type, use appropriate
__btf_member_bit_offset() to get bit offset, and use member_type for
btf_type_kflag() in get_bitoffset_of_field().
Link: https://lore.kernel.org/all/178827250904.123716.17452648791331881284.stgit@devnote2/
Fixes: c440adfbe302 ("tracing/probes: Support BTF based data structure field access")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260822095110.0772E1F000E9@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.7-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
|
|
btf_find_struct_member
btf_find_struct_member() traverses into nested anonymous structures
and unions by pushing members with !member->name_off onto anon_stack.
However, it does not consider the unnamed bitfields (e.g. `int : 5`
or `unsigned int : 0`) which also have member->name_off == 0.
If such an unnamed bitfield is pushed to anon_stack, the
btf_find_struct_member() return an error even if there are other
valid entries in anon_stack.
To fix this, only push unnamed struct/union members to anon_stack.
Also move the btf_type_is_struct() check to the entry of this function
because now it is sure only struct/union are pushed to anon_stack.
Link: https://lore.kernel.org/all/178827249775.123716.7813217688423513612.stgit@devnote2/
Fixes: 302db0f5b3d8 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260830143859.D56991F00A3D@smtp.kernel.org/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- Default randstruct off with rust for better allmodconfig coverage
(Mark Brown)
* tag 'hardening-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Default randstruct off with rust for better allmodconfig support
|
|
need to pad before __u64 tcc_disabled_mask variable.
This patch fixes 64bit Kernel + 32 bit mesa combination. But at the same
time it will break 32bit Kernel(using this patch) + older 32bit mesa(not
using this patch).
This issue was discussd with alexander.deucher@amd.com,
christian.koenig@amd.com and pierre-eric.pelloux-prayer@amd.com.
Currently today 32 bit kernel + 32 bit userspace and 64 bit kernel and
64 bit userspace work. Mixed 64 bit kernel and 32 bit userspace is
currently broken. Since 32 bit kernel and userspace is probably pretty
rare these days and the data affected by this is not critical, Hence
we can go ahead with this patch.
Fixes: cf21e76a6005 ("drm/amdgpu: return tcc_disabled_mask to userspace")
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 497b5090f2857ef8ad9a162aa31ada0de5814663)
|
|
[WHY]
resource_can_pipe_disable_cursor() disables the hardware cursor on a
pipe when a higher layer fully covers that pipe's recout, to avoid
double-cursor and scaling artifacts.
When merging pipe-split halves of the same overlay layer, the inner
loop walks every pipe above the current one and looks for siblings
sharing test_pipe's layer_index. Because test_pipe itself satisfies
that condition, it can be treated as its own split partner. That
incorrectly doubles r2.width and makes the covering check succeed even
when the overlay does not fully contain the underlying pipe.
On horizontally split or multi-quadrant layouts this causes the cursor
to disappear over overlay regions while input/coordinate mapping remains
correct.
[HOW]
Skip test_pipe when searching for a pipe-split sibling on the same
layer, so only the other half of the split plane is merged into r2.
Signed-off-by: Yuling Li <yulingli@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 85ccd2c39cca9351d4db393e24acea8bf943d350)
|
|
If a queue fails to map that we need to return the error code back
to the caller and not overwrite with a success specifically.
Accumulate the failure and return that.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42a0197d10039e9518c0324c43331eb22b44d5f8)
|
|
Psp runtime DB is for dGPUs only.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dce8195027f146467c9378efb2bb1b0859cb735e)
Cc: stable@vger.kernel.org
|
|
Update to the latest stable fw versions where userqueues
is working as it is expected with major fixes.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 69fa36e3ac92f2544ee7a1b719ec212b8247a2da)
Cc: stable@vger.kernel.org
|
|
Update to the latest stable fw versions where userqueues
is working as it is expected with major fixes.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d50201b891604ab97f305d4a20d888ba93305b48)
Cc: stable@vger.kernel.org
|
|
In amdgpu_devcoredump_print_ibs(), the NO_CPU_ACCESS VRAM path passed
cursor.start/4 and cursor.size/4 to amdgpu_device_mm_access(), but that
function's pos/size parameters are byte offsets/lengths (confirmed by
amdgpu_ttm_vram_mm_access() and leading to wrong size calculation.
Similarly with that change the off index needs to be calculated
based on dword since that is a u32 type.
Fixes: 7b15fc2d1f1a ("drm/amdgpu: dump job ibs in the devcoredump")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1bd613b0ed98a23575b18674c94b8b3392614681)
Cc: stable@vger.kernel.org
|
|
Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD
queue triggers a NULL pointer dereference because the for loop that
calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the
if (pqn->q) block that initializes mqd_mgr.
The queue list can contain entries where pqn->q is NULL (kernel queues
where only pqn->kq is valid). In the original code:
if (pqn->q) {
...
mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type];
size = mqd_mgr->mqd_stride(...);
}
for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block
mqd = q->mqd + size * xcc;
r = mqd_mgr->debugfs_show_mqd(m, mqd);
}
When iterating over a queue node where pqn->q is NULL:
1. The if (pqn->q) block is skipped
2. mqd_mgr remains uninitialized (NULL from declaration)
3. The for loop executes anyway
4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
RIP: 0010:0x0
Call Trace:
pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu]
kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu]
seq_read_iter+0x132/0x4b0
...
Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr
and related variables are only used when properly initialized.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5689
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260831130051.2031435-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de)
Cc: stable@vger.kernel.org
|
|
get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity,
which is zeroed by reset_bw_alloc_struct() and only populated once
DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled.
link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler,
calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED
is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED
has ever fired for that link. A connected USB4/DPIA tunneling device
that reports an estimated-bandwidth change before ever reporting a
capability change drives a division by zero in this IRQ path.
link_dpia_send_bw_alloc_request() already guards the same
bw_granularity division; add the identical guard here rather than
introducing a new pattern.
Fixes: 8e5cfe547bf3 ("drm/amd/display: upstream link_dp_dpia_bw.c")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Hari Mishal <harimishal1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3)
Cc: stable@vger.kernel.org
|
|
In encode-to-linear conversions, LUT entries should be uniformly
distributed across the input range: non-linear encodings are already
approximately perceptually uniform, so every input code carries the same
weight. A fixed count per region does the opposite, concentrating
entries on the darker values and leaving few for the bright end, whereas
halving distribution spaces all 256 entries uniformly. This holds for
any encoded input, so remove the PQ/sRGB condition from commit
"drm/amd/display: use halving distribution for PQ/sRGB linearizing LUT"
and apply halving to all encode-to-linear operations
(pre-defined TF or user LUTs).
It fixes the following IGT kms_colorop subtests:
- plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut
- plane-XR30-XR30-gamma_2_2-gamma_2_2_inv-gamma_2_2
Fixes: a71d2b051f33 ("drm/amd/display: use halving distribution for PQ/sRGB linearizing LUT")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6df7c9c307e72e7f13829e94edc89134f0764775)
|
|
[WHY]
For some eDP panels VESA aux backlight control is necessary,
otherwise they stay black.
[HOW]
When AUX backlight control is used, select BACKLIGHT_CONTROL_VESA_AUX for
panels that advertise panel_luminance_control.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42f698bd061d76d5f4c84a195e465cfbeec775e4)
|
|
[WHY/HOW]
Integer values for
dml2_core_calcs_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport_params
should not have the const qualifier.
This prevents using different values of the inputs when the
function is called again.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 342280aae4f33816e8d07c15cb538a3b375a7f8f)
Cc: stable@vger.kernel.org
|
|
[WHY]
Splash screen corruption on some 8K monitors.
[HOW]
Set GPUVM min page size to 4K for DCN35/36 to use the correct DML2
calculations, avoiding the corruption path observed during splash.
Fixes: 115009d11ccf ("drm/amd/display: Add DCN35 DML2 support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2cbfb03dead5088a7bdfe2ce392a5caa3d1b3719)
Cc: stable@vger.kernel.org
|
|
[WHY]
A kernel compilation warning was reported caused by upstream of DCN5/6.
[HOW]
Using plain integer as NULL pointer. Assign NULL to the
VActiveLatencyHidingMargin/VActiveLatencyHidingUs pointer members in
dml2_core_dcn5_funcs_mode_programming.c, and pass NULL for the pointer
arguments to calculate_first_second_splitting() in
dml2_pmo_dcn6_stage_optimizers.c.
Fixes: 7f7d7ea1fa51 ("drm/amd/display: Add new sources for DCN6")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d96880560e9f35ba7f8de1b3f90032c8c3eaea88)
|
|
amdgpu_debugfs_vm_bo_status_info() prints the "Idle BOs" section by
iterating lists->needs_update, the same list already printed just
above under "Moved BOs". struct amdgpu_vm_bo_status has a dedicated
idle list, populated whenever a BO's state machine settles, but it
was never read here, so genuinely idle BOs never show up in the
debugfs output and the "Idle BOs" section duplicates "Moved BOs"
instead.
Iterate lists->idle for the "Idle BOs" section.
Fixes: 4cdbba5a16aa ("drm/amdgpu: restructure VM state machine v4")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 451bfc778a8c364841837def00ba15936f72762b)
Cc: stable@vger.kernel.org
|
|
For different address types the variable PAGE_SHIFT might
not work well and it's better to use the GPU specific one
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3494b77d10375e0f9ab784e9b20763339844b55b)
Cc: stable@vger.kernel.org
|
|
Update queue reset required MES version for MES 12.1 to 0x7b since we
change the implementation from detect-and-reset method to
per-queue-reset method.
Signed-off-by: Amber Lin <amber.lin@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2160a5cbf0b7917adce4b55421306b614b4a2c8f)
|
|
Don't apply to KIQ. Seems to cause problems on KIQ
on some ARM platforms.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5658
Fixes: 91cf34bc5a55 ("drm/amdgpu/gfx8: align mqd settings with KFD")
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6aae7bab029cdccae9a7157facfe36bfc35fc940)
Cc: stable@vger.kernel.org
|
|
The BAR0 fallback read path was introduced as a workaround for SR-IOV VFs
where the VRAM aperture is not available during early init. Restrict this
workaround to only SR-IOV VFs where it's needed.
Reported-by: gloveless@jqluv.com
Fixes: cba4928cdffa ("drm/amdgpu: reduce early full GPU access during SR-IOV init")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260826185102.2269511-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8a0affd207c813bd063fa2c27786f449eaf92b8)
|
|
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77)
Cc: stable@vger.kernel.org
|
|
David Sterba has been doing the Btrfs maintainership work for years, and
my email update to mason@kernel.org seems like a good time to make the
MAINTAINERS file a little more accurate.
Link: https://lore.kernel.org/all/20260827193032.786461-1-clm@meta.com/
Signed-off-by: Chris Mason <clm@meta.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inside test_find_delalloc() of extent-io-tests.c, if we fail to allocate
a dummy root or the test inode, we go to out label to clean up.
But at that stage, @inode is still NULL and we will call
process_page_range() to access the page cache of the inode, this will
cause NULL pointer dereference.
This is a very minor bug, as it only affects selftests which are not
compiled in by default for most distros, and very hard to trigger.
Fix it by adding a new out_root_info label to handle root and inode
allocation failure.
This is a pre-existing bug reported by Sashiko while reviewing another
patch.
Link: https://sashiko.dev/#/patchset/cover.1786095309.git.wqu%40suse.com
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm->wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
Only a max level workspace triggers the wakeup and one is deliberately kept
allocated as the fallback every waiter waits for, so once its wakeup is
lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens
to return one. Re-check the pool after prepare_to_wait() has published the
waiter, and use the workspace if one turned up.
Fixes: 3f93aef535c8 ("btrfs: add zstd compression level support")
Assisted-by: Claude:claude-opus-5
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: FAN YE <fy15309206903@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota",
it has a high chance to trigger the following kernel warning and flips
the fs RO:
BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup
------------[ cut here ]------------
WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173
CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs]
Call Trace:
<TASK>
insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
create_pending_snapshot+0x39d/0xf00 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
create_pending_snapshots+0x9b/0xc0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_commit_transaction+0x280/0xeb0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
prepare_to_relocate+0x147/0x200 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
relocate_block_group+0x6b/0x5e0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_relocate_block_group+0x92c/0x2380 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_relocate_chunk+0x3f/0x1a0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_balance+0xa2c/0x19c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_ioctl+0x2839/0x2d30 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__x64_sys_ioctl+0x416/0x9a0
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS info (device dm-2): leaf 4593991680 gen 233 total ptrs 175 free space 5953 owner 2
BTRFS info (device dm-2): refs 3 lock_owner 2173 current 2173
item 0 key (166772736 METADATA_ITEM 1) itemoff 16250 itemsize 33
extent refs 1 gen 222 flags 2
ref#0: tree block backref root 266
[ Skip the tree dump ]
item 174 key (263225344 METADATA_ITEM 0) itemoff 10328 itemsize 33
extent refs 1 gen 162 flags 258
ref#0: tree block backref root 267
BTRFS error (device dm-2): extent item not found for insert, bytenr 179847168 num_bytes 16384 parent 4594335744 root_objectid 273 owner 0 offset 0
BTRFS error (device dm-2): failed to run delayed ref for logical 179847168 num_bytes 16384 type 182 action 1 ref_mod 1: -117
[CAUSE]
The above error is showing that there is a tree reference to a metadata
extent that is no longer there.
With "ref_verify" mount option (requires CONFIG_BTRFS_DEBUG), there is
some extra debug output:
BTRFS error (device dm-2): dumping block entry [180961280 16384], num_refs 0, metadata 1, from disk 0
BTRFS error (device dm-2): root entry 256, num_refs 18446744073709551615
BTRFS error (device dm-2): root entry 273, num_refs 18446744073709551615
BTRFS error (device dm-2): Ref action 3, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 1
btrfs_force_cow_block+0x129/0x7d0 [btrfs]
btrfs_cow_block+0x10a/0x250 [btrfs]
btrfs_search_slot+0x5eb/0xf40 [btrfs]
btrfs_insert_empty_items+0x3a/0x70 [btrfs]
insert_with_overflow+0x53/0x130 [btrfs]
btrfs_insert_dir_item+0x125/0x290 [btrfs]
btrfs_add_link+0xaa/0x410 [btrfs]
btrfs_rename+0x5ea/0xcd0 [btrfs]
btrfs_rename2+0x28/0x60 [btrfs]
vfs_rename+0x5b2/0xe10
filename_renameat2+0x244/0x430
__x64_sys_rename+0x48/0x70
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
BTRFS error (device dm-2): Ref action 2, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 18446744073709551615
btrfs_force_cow_block+0x327/0x7d0 [btrfs]
btrfs_cow_block+0x10a/0x250 [btrfs]
btrfs_search_slot+0x5eb/0xf40 [btrfs]
btrfs_lookup_file_extent+0x4d/0x70 [btrfs]
btrfs_drop_extents+0x151/0xf00 [btrfs]
insert_reserved_file_extent+0xfe/0x3e0 [btrfs]
btrfs_finish_one_ordered+0x549/0xc40 [btrfs]
btrfs_work_helper+0xde/0x350 [btrfs]
process_one_work+0x198/0x380
worker_thread+0x1c8/0x330
kthread+0xee/0x120
ret_from_fork+0x28f/0x310
ret_from_fork_asm+0x11/0x20
BTRFS error (device dm-2): Ref action 1, root 273, ref_root 0, parent 4594335744, owner 0, offset 0, num_refs 1
__btrfs_mod_ref+0x1c5/0x2d0 [btrfs]
btrfs_copy_root+0x262/0x390 [btrfs]
create_reloc_root+0xb9/0x370 [btrfs]
btrfs_init_reloc_root+0xb0/0x1b0 [btrfs]
record_root_in_trans+0xa6/0xd0 [btrfs]
create_pending_snapshot+0x383/0xf00 [btrfs]
create_pending_snapshots+0x9b/0xc0 [btrfs]
btrfs_commit_transaction+0x280/0xeb0 [btrfs]
prepare_to_relocate+0x147/0x200 [btrfs]
relocate_block_group+0x6b/0x5e0 [btrfs]
btrfs_relocate_block_group+0x92c/0x2380 [btrfs]
btrfs_relocate_chunk+0x3f/0x1a0 [btrfs]
btrfs_balance+0xa2c/0x19c0 [btrfs]
btrfs_ioctl+0x2839/0x2d30 [btrfs]
__x64_sys_ioctl+0x416/0x9a0
do_syscall_64+0xe1/0x790
The above shows the direct cause, Ref action 3 is the oldest operation,
which shows the tree block is created by COW. Then ref action 2 shows
it's COWed away, by a metadata update, meaning the tree block is already
released, should not be referred any more.
Then the final one, is trying to create a reloc tree for subvolume 273,
and that reloc root creation is referring to the already dropped tree
block.
The root cause is that, during qgroup_account_snapshot(), we are calling
record_root_in_trans() with "force = true".
So if the root has no reloc root, we will create one, but at that
timing it's already too late.
Normally reloc root should be created before the commit and current
roots diverge, to avoid the same problem we are hitting.
But during relocation initialization, we are committing the current
running transaction, with a new reloc_control attached halfway.
And if qgroup is enabled, the record_root_in_trans() with "force = true"
calls will force reloc root creation even if we do not and should not
create reloc root at that timing.
[FIX]
Do not force reloc root creation during record_root_in_trans() with
"force = true" cases, which is only called by qgroup_account_snapshot().
If we're really under relocation, the reloc root should be created way
early, before the commit and current root diverge. If the root has no
reloc tree yet, it means we're still initializing the reloc, and do not
need a reloc root.
So skipping the reloc tree creation in qgroup_account_snapshot() should
be safe.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1275740
Fixes: 4d31778aa2fa ("btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled")
Assisted-by: LLM (initial analysis, but incorrect conclusion with too many burnt tokens)
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The direct-return refactoring in commit b3047a42f55d ("btrfs: send:
directly return from will_overwrite_ref() and simplify it") changed
will_overwrite_ref() to return directly instead of going through the
common out label.
That resulted in a negative return value from is_inode_existent() to
start being converted to 0, making lookup errors unable to be
distinguished from the inode not existing.
process_recorded_refs() expects negative errors from
will_overwrite_ref() and aborts processing when it receives one.
Return the value from is_inode_existent() to restore the previous error
propagation behavior as it was before the refactor.
Fixes: b3047a42f55d ("btrfs: send: directly return from will_overwrite_ref() and simplify it")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When transaction metadata writeout fails in btrfs_commit_transaction(),
the current code only logs the error, drops tree_log_mutex and then goes
through cleanup_transaction(), which aborts the transaction and records
the fs error.
That is too late for the tree log side. A log sync can already be
waiting on tree_log_mutex, because the committing transaction is moved
to TRANS_STATE_UNBLOCKED while that mutex is held, which lets fsyncs
join the next transaction and queue up in btrfs_sync_log(). Once the
failed commit drops tree_log_mutex, such a log sync acquires it, sees
BTRFS_FS_ERROR() still clear, and writes super_for_commit. That
superblock holds the roots prepared for the transaction that has just
failed to write out its metadata, so it can point at tree blocks that
never reached the disk, and the next mount fails with a parent transid
mismatch.
Commit 165ea85f1483 ("btrfs: do not write supers if we have an fs
error") fixed this class of problem by making btrfs_sync_log() check for
an fs error right after taking tree_log_mutex. That check only works if
the commit path publishes the fs error before it releases the same
mutex, and commit 68d4ece9c30e ("btrfs: don't call
btrfs_handle_fs_error() in btrfs_commit_transaction()") removed the only
thing that did so.
Restore the ordering by aborting the transaction while tree_log_mutex is
still held. We have a transaction handle here, so this does not need to
bring back the btrfs_handle_fs_error() call: __btrfs_abort_transaction()
records the fs error itself, which is all btrfs_sync_log() looks at, and
the error message put in its place is kept.
This is what commit 3810ab40afa5 ("btrfs: abort transaction on error in
write_all_supers()") already does for the next call in this function.
This is reproducible on an unmodified kernel by failing the first
couple of bios of a transaction commit with fail_make_request while a
concurrent fsync workload keeps log syncs queued on tree_log_mutex.
Fixes: 68d4ece9c30e ("btrfs: don't call btrfs_handle_fs_error() in btrfs_commit_transaction()")
CC: stable@vger.kernel.org # 7.0+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: jlayton@meta.com <jlayton@meta.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_zone_finish_endio() ignored the return value of do_zone_finish()
and always returned 0, silently dropping a failed zone finish.
Instead propagate any error from do_zone_finish() as the caller
btrfs_finish_ordered_io() already handles it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent.
Fixes: d70cbdda75da ("btrfs: zoned: consolidate zone finish functions")
Link: https://sashiko.dev/#/patchset/20260818100037.1366563-1-johannes.thumshirn%40wdc.com
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
A corrupted subvolume tree can leave an EXTENT_DATA item attached to an
inode whose mode is not S_IFREG or S_IFLNK. During send, such an item can
be treated as file data and crash through a NULL address_space operation:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
Call Trace:
<TASK>
read_pages+0x80b/0xb30 mm/readahead.c:173
page_cache_ra_unbounded+0x40d/0x890 mm/readahead.c:302
do_page_cache_ra mm/readahead.c:332 [inline]
page_cache_ra_order+0xa16/0xcd0 mm/readahead.c:535
page_cache_sync_ra+0x5ce/0x9d0 mm/readahead.c:626
page_cache_sync_readahead include/linux/pagemap.h:1379 [inline]
put_file_data fs/btrfs/send.c:5224 [inline]
send_write fs/btrfs/send.c:5291 [inline]
send_extent_data+0x16b2/0x29b0 fs/btrfs/send.c:5715
send_write_or_clone fs/btrfs/send.c:6135 [inline]
process_extent+0x5d4/0x17b0 fs/btrfs/send.c:6504
changed_extent fs/btrfs/send.c:7079 [inline]
changed_cb+0x22f9/0x3cd0 fs/btrfs/send.c:7245
full_send_tree fs/btrfs/send.c:7318 [inline]
send_subvol fs/btrfs/send.c:7910 [inline]
btrfs_ioctl_send+0x46a9/0x57f0 fs/btrfs/send.c:8248
...
[CAUSE]
process_extent() skips extent items for symlinks but assumes every other
inode with an extent item is a regular file. For a corrupted non-regular
inode, btrfs_iget() does not install the regular file address_space
operations. The readahead fallback can then call a NULL read_folio
callback before the existing validation in btrfs_get_extent() can run.
[FIX]
Reject extent items for inode types other than regular files and symlinks
at the common send extent-processing boundary. Symlink handling is left
unchanged because send emits symlink data from read_symlink(). This covers
full, incremental and new-generation sends without adding a check to the
regular I/O path.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: ZhengYuan Huang <gality369@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_abort_transaction() only accepts negative error code,
and have the macro VERIFY_NEGATIVE_ERROR() to verify that error code.
But inside update_raid_extent_item(), if there is such key found, we
return 1, breaking the negative error code scheme.
Furthermore if we hit some real error during the tree search, e.g. -EIO,
then the error code is always over-written to -EINVAL.
Fix both problems by following other call sites by overwriting @ret to
-ENOENT if the btrfs_search_slot() failed to locate the key.
This is very unlikely to hit, as we only enter update_raid_extent_item()
if there is a conflicting key already in the raid stripe tree.
This was reported by Sashiko when reviewing another patch.
Link: https://sashiko.dev/#/patchset/20260817021512.3010812-1-shuangpeng.kernel%40gmail.com
Fixes: 8c4cba2adbb0 ("btrfs: update stripe extents for existing logical addresses")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch.
Link: https://sashiko.dev/#/patchset/20260817021512.3010812-1-shuangpeng.kernel%40gmail.com
Fixes: 02c372e1f016 ("btrfs: add support for inserting raid stripe extents")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If allocation of a RAID stripe extent fails,
btrfs_insert_one_raid_extent() aborts and ends the transaction before
returning -ENOMEM.
btrfs_finish_one_ordered(), the production caller through
btrfs_insert_raid_extent(), still owns the transaction handle. It handles
the error by aborting the transaction and then reaches the common exit
path, which ends the transaction again.
The premature end can free the handle and drop its transaction reference.
Transaction cleanup can then free the transaction before the caller's
second abort accesses the handle and transaction, resulting in
use-after-free.
Keep the abort at the failure site, but let the caller's common exit path
end the transaction once, after it has finished using both objects.
Fixes: 02c372e1f016 ("btrfs: add support for inserting raid stripe extents")
Assisted-by: Codex:GPT-5
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
scrub_stripe_report_errors() iterates over the sectors of a stripe, but
every message it emits passes stripe->logical, the address of the first
sector of the 64KiB stripe, rather than the address of the sector being
reported. The physical address is likewise computed once, before the
loop, from stripe->logical.
This matters because scrub_print_common_warning() uses that logical
address for the backref walk which produces the "root %llu inode %llu
offset %llu ... (path: ...)" part of the message. As the address is
always the stripe base, the reported root/inode/offset/path can identify
a different file from the one whose sector actually failed.
A 64KiB stripe routinely spans several extents belonging to unrelated
files. On the machine where this was found, the stripe at logical
0x17D9380000 holds four sectors of /usr/share/plasma/emoji/bg.dict, then
a file inside a docker volume, then sectors referenced only by
snapshots. Every error anywhere in that stripe is attributed to bg.dict.
The effect is visible statistically: across ten months and four kernel
series that machine logged 81 distinct flagged logical addresses, and
every one of them is exactly 64KiB aligned. Since BTRFS_STRIPE_LEN is
64KiB and stripe->logical is stripe aligned by construction, real
failures distributed across sectors could not produce that.
Report the address of the sector actually being examined. Adding the
sector offset to the physical address is valid because BTRFS_STRIPE_LEN
is the unit contiguous on a single device for every profile, so a stripe
never crosses a device boundary.
Fixes: 0096580713ff ("btrfs: scrub: introduce error reporting functionality for scrub_stripe")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: James C. Owens <jamesowens@optonline.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
drm_pagemap_migrate_populate_ram_pfn() had two issues when populating
RAM PFNs with higher-order folios:
1. The higher-order vma_alloc_folio()/folio_alloc() calls did not pass
__GFP_NOWARN, so a THP allocation failure under memory pressure
would spam the kernel log, and there was no fallback path despite a
TODO comment stating one was needed. Add __GFP_NOWARN to the
higher-order allocation and, on failure, fall back to order-0
allocations for the entire range originally covered by the failed
higher-order allocation, leaving MIGRATE_PFN_COMPOUND unset for
those PFNs.
2. In the free_pages error path, order was computed via
folio_order(page_folio(page)) *after* put_page(page) had already
dropped the reference, resulting in a use-after-free/put when that
was the last reference on the page. Compute order before releasing
the page.
Introducing the fallback in 1. also requires the source page array
handed to ->copy_to_ram() to be built differently. Both callers only
populated the entry at the head of each source folio, relying on the
copy callback to derive the rest of the folio from the order recorded
in the matching drm_pagemap_addr. Once the destination has been demoted
to order-0 folios the drm_pagemap_addr entries are per-page, so a source
page is needed for every one of them; leaving them NULL makes the copy
callback stop after the first page and the remainder of the range is
never copied.
The source folio is only split later, by migrate_vma_pages() /
migrate_device_pages(), so its order cannot be used to detect the
demotion - test the destination for MIGRATE_PFN_COMPOUND instead. Factor
the array population out into drm_pagemap_migrate_populate_src_pages()
and use it from both drm_pagemap_evict_to_ram() and
__drm_pagemap_migrate_to_ram().
Fixes: ddeda6136038 ("drm/pagemap: Allocate folios when possible")
Cc: stable@vger.kernel.org
Assisted-by: GitHub_Copilot:claude-opus-5
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260902063504.3024362-2-matthew.brost@intel.com
|
|
drm_pagemap_migrate_unmap_pages() relies on the pages array to determine
which pages require DMA unmapping. However,
drm_pagemap_migration_unlock_put_pages() clears the array as part of its
cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page
information if it is called afterward.
Call drm_pagemap_migrate_unmap_pages() before
drm_pagemap_migration_unlock_put_pages() so the pages array remains
valid during DMA unmapping.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: f86ad0ed620c ("drm/gpusvm, drm/pagemap: Move migration functionality to drm_pagemap")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260902063504.3024362-1-matthew.brost@intel.com
|
|
The options files do not take the trace_array reference for the options
they represent. This could cause a use-after-free kernel crash if one of
these files is opened by one task and another task removes the instance
that the option is for. Because it doesn't take a reference upon opening,
it will not stop the removal which will free the options descriptor that
is being used.
As the options are somewhat dynamic in their creation at boot up, each
file represents a flag in the trace_array. The trace_array has an array of
indexes to represent each of these flags that is stored in the
trace_flags_index array. The address of the index array element is used to
pass to the inode->i_private pointer. Then that element is read which
holds the index (which represents the flag) and then the index is used to
calculate the trace_array descriptor from its trace_flags_index array.
One issue is that the index element can not be referenced until the
trace_array's reference is taken. To handle this, create a new helper
function called: trace_array_options_get() that will iterate all the
existing trace_arrays in the ftrace_trace_arrays list (under the
trace_types_lock), and compare the passed in address of the index element
with the entire array of the trace_array's trace_flags_index array.
If it matches, then up the corresponding trace_array's reference and
return.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902121918.5a9e9d1b@gandalf.local.home
Fixes: 577b785f55168 ("tracing: add tracer dependent options to options directory")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-trace-kernel/20260828135858.2AC501F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
DCE can support PREMULTI and COVERAGE blend mode depending on its
generation, however current driver implementation either doesn't expose
more than primary and cursor plane, or doesn't program registers for any
blend mode other than PIXEL_NONE. To fix the missing-blend-mode-prop
warning according to current DCE plane caps, create blend mode property
with PIXEL_NONE and PREMULTI for primary planes. As long as the
background is black and there is no overlay plane, PIXEL_NONE and
PREMULTI are equivalent, and PREMULTI has been the mandatory/default
mode for years, so keep it to avoid regressions.
Fixes: 860e748bddcc ("drm: ensure blend mode supported if pixel format with alpha exposed")
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com> #v3
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Leandro Ribeiro <leandro.ribeiro@collabora.com> #v2
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260826104143.39077-4-mwen@igalia.com
|
|
validate_blend_mode_for_alpha_formats() warns when a plane supports
formats with alpha but doesn't expose the blend mode property. Fix this
by adding the same overlay plane blend modes to primary plane, since
they are all universal planes in DCN-generation. Cursor planes support
ARGB8888 format and CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA is set by
default (other color formats are not implemented), so only expose
support to PREMULTI, which is the default blend mode on DRM.
Fixes: 860e748bddcc ("drm: ensure blend mode supported if pixel format with alpha exposed")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260826104143.39077-3-mwen@igalia.com
|
