| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On hybrid systems, events like msr/tsc/ will aggregate counts across
all CPUs. Often metrics only want a value like msr/tsc/ for the cores
on which the metric is being computed. Listing each CPU with terms
cpu=0,cpu=1.. is laborious and would need to be encoded for all
variations of a CPU model.
Allow the cpumask from a PMU to be an argument to the cpu term. For
example in the following the cpumask of the cstate_pkg PMU selects the
CPUs to count msr/tsc/ counter upon:
```
$ cat /sys/bus/event_source/devices/cstate_pkg/cpumask
0
$ perf stat -A -e 'msr/tsc,cpu=cstate_pkg/' -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 252,621,253 msr/tsc,cpu=cstate_pkg/
0.101184092 seconds time elapsed
```
As the cpu term is now also allowed to be a string, allow it to encode
a range of CPUs (a list can't be supported as ',' is already a special
token).
The "event qualifiers" section of the `perf list` man page is updated
to detail the additional behavior. The man page formatting is tidied
up in this section, as it was incorrectly appearing within the
"parameterized events" section.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
As evsels may have additional CPU terms, the user_requested_cpus may
not reflect all the CPUs requested. Use evlist->all_cpus to size the
array as that reflects all the CPUs potentially needed by the evlist.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
CPUs may be created and passed to perf_stat__get_aggr (via
config->aggr_get_id), such as in the stat display
should_skip_zero_counter. There may be no such aggr_id, for example,
if running with a thread. Add a missing bound check and just create
IDs for these cases.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Factor requested CPU warning out of evlist and into evsel. At the end
of adding an event, perform the warning check. To avoid repeatedly
testing if the cpu_list is empty, add a local variable.
```
$ perf stat -e cpu_atom/cycles,cpu=1/ -a true
WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cpu_atom/cycles/'
Performance counter stats for 'system wide':
<not supported> cpu_atom/cycles/
0.000781511 seconds time elapsed
```
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Force loading all PMUs adds significant cost because DRM and other
PMUs are loaded, it should also not be required if the pmus__
functions are used.
Tested by run perf test, in particular the pfm related tests. Also
`perf list` is identical before and after.
Before:
$ time ./perf test pfm
54: Test libpfm4 support :
54.1: test of individual --pfm-events : Ok
54.2: test groups of --pfm-events : Ok
103: perf all libpfm4 events test : Ok
real 0m8.933s
user 0m1.824s
sys 0m7.122s
After:
$ time ./perf test pfm
54: Test libpfm4 support :
54.1: test of individual --pfm-events : Ok
54.2: test groups of --pfm-events : Ok
103: perf all libpfm4 events test : Ok
real 0m5.259s
user 0m1.793s
sys 0m3.570s
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250722013449.146233-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and xfrm.
The TI regression notified last week is actually on our net-next tree,
it does not affect 6.16.
We are investigating a virtio regression which is quite hard to
reproduce - currently only our CI sporadically hits it. Hopefully it
should not be critical, and I'm not sure that an additional week would
be enough to solve it.
Current release - fix to a fix:
- sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class
Previous releases - regressions:
- xfrm:
- set transport header to fix UDP GRO handling
- delete x->tunnel as we delete x
- eth:
- mlx5: fix memory leak in cmd_exec()
- i40e: when removing VF MAC filters, avoid losing PF-set MAC
- gve: fix stuck TX queue for DQ queue format
Previous releases - always broken:
- can: fix NULL pointer deref of struct can_priv::do_set_mode
- eth:
- ice: fix a null pointer dereference in ice_copy_and_init_pkg()
- ism: fix concurrency management in ism_cmd()
- dpaa2: fix device reference count leak in MAC endpoint handling
- icssg-prueth: fix buffer allocation for ICSSG
Misc:
- selftests: mptcp: increase code coverage"
* tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
net: hns3: default enable tx bounce buffer when smmu enabled
net: hns3: fixed vf get max channels bug
net: hns3: disable interrupt when ptp init failed
net: hns3: fix concurrent setting vlan filter issue
s390/ism: fix concurrency management in ism_cmd()
selftests: drv-net: wait for iperf client to stop sending
MAINTAINERS: Add in6.h to MAINTAINERS
selftests: netfilter: tone-down conntrack clash test
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
gve: Fix stuck TX queue for DQ queue format
net: appletalk: Fix use-after-free in AARP proxy probe
net: bcmasp: Restore programming of TX map vector register
selftests: mptcp: connect: also cover checksum
selftests: mptcp: connect: also cover alt modes
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
...
|
|
* for-next/feat_mte_store_only:
: MTE feature to restrict tag checking to store only operations
kselftest/arm64/mte: Add MTE_STORE_ONLY testcases
kselftest/arm64/mte: Preparation for mte store only test
kselftest/arm64/abi: Add MTE_STORE_ONLY feature hwcap test
KVM: arm64: Expose MTE_STORE_ONLY feature to guest
arm64/hwcaps: Add MTE_STORE_ONLY hwcaps
arm64/kernel: Support store-only mte tag check
prctl: Introduce PR_MTE_STORE_ONLY
arm64/cpufeature: Add MTE_STORE_ONLY feature
|
|
'for-next/misc', 'for-next/acpi', 'for-next/debug-entry', 'for-next/feat_mte_tagged_far', 'for-next/kselftest', 'for-next/mdscr-cleanup' and 'for-next/vmap-stack', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (23 commits)
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
perf/cxlpmu: Fix typos in cxl_pmu.c comments and documentation
perf/cxlpmu: Remove unintended newline from IRQ name format string
perf/cxlpmu: Fix devm_kcalloc() argument order in cxl_pmu_probe()
perf: arm_spe: Relax period restriction
perf: arm_pmuv3: Add support for the Branch Record Buffer Extension (BRBE)
KVM: arm64: nvhe: Disable branch generation in nVHE guests
arm64: Handle BRBE booting requirements
arm64/sysreg: Add BRBE registers and fields
perf/arm: Add missing .suppress_bind_attrs
perf/arm-cmn: Reduce stack usage during discovery
perf: imx9_perf: make the read-only array mask static const
perf/arm-cmn: Broaden module description for wider interconnect support
...
* for-next/livepatch:
: Support for HAVE_LIVEPATCH on arm64
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: Implement HAVE_LIVEPATCH
arm64: stacktrace: Implement arch_stack_walk_reliable()
arm64: stacktrace: Check kretprobe_find_ret_addr() return value
arm64/module: Use text-poke API for late relocations.
* for-next/user-contig-bbml2:
: Optimise the TLBI when folding/unfolding contigous PTEs on hardware with BBML2 and no TLB conflict aborts
arm64/mm: Elide tlbi in contpte_convert() under BBML2
iommu/arm: Add BBM Level 2 smmu feature
arm64: Add BBM Level 2 cpu feature
arm64: cpufeature: Introduce MATCH_ALL_EARLY_CPUS capability type
* for-next/misc:
: Miscellaneous arm64 patches
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: signal: Remove ISB when resetting POR_EL0
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=y
arm64/mm: Optimize loop to reduce redundant operations of contpte_ptep_get
arm64: pi: use 'targets' instead of extra-y in Makefile
* for-next/acpi:
: Various ACPI arm64 changes
ACPI: Suppress misleading SPCR console message when SPCR table is absent
ACPI: Return -ENODEV from acpi_parse_spcr() when SPCR support is disabled
* for-next/debug-entry:
: Simplify the debug exception entry path
arm64: debug: remove debug exception registration infrastructure
arm64: debug: split bkpt32 exception entry
arm64: debug: split brk64 exception entry
arm64: debug: split hardware watchpoint exception entry
arm64: debug: split single stepping exception entry
arm64: debug: refactor reinstall_suspended_bps()
arm64: debug: split hardware breakpoint exception entry
arm64: entry: Add entry and exit functions for debug exceptions
arm64: debug: remove break/step handler registration infrastructure
arm64: debug: call step handlers statically
arm64: debug: call software breakpoint handlers statically
arm64: refactor aarch32_break_handler()
arm64: debug: clean up single_step_handler logic
* for-next/feat_mte_tagged_far:
: Support for reporting the non-address bits during a synchronous MTE tag check fault
kselftest/arm64/mte: Add mtefar tests on check_mmap_options
kselftest/arm64/mte: Refactor check_mmap_option test
kselftest/arm64/mte: Add verification for address tag in signal handler
kselftest/arm64/mte: Add address tag related macro and function
kselftest/arm64/mte: Check MTE_FAR feature is supported
kselftest/arm64/mte: Register mte signal handler with SA_EXPOSE_TAGBITS
kselftest/arm64: Add MTE_FAR hwcap test
KVM: arm64: Expose FEAT_MTE_TAGGED_FAR feature to guest
arm64: Report address tag when FEAT_MTE_TAGGED_FAR is supported
arm64/cpufeature: Add FEAT_MTE_TAGGED_FAR feature
* for-next/kselftest:
: Kselftest updates for arm64
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
kselftest/arm4: Provide local defines for AT_HWCAP3
kselftest/arm64: Specify SVE data when testing VL set in sve-ptrace
kselftest/arm64: Fix test for streaming FPSIMD write in sve-ptrace
kselftest/arm64: Fix check for setting new VLs in sve-ptrace
kselftest/arm64: Convert tpidr2 test to use kselftest.h
* for-next/mdscr-cleanup:
: Drop redundant DBG_MDSCR_* macros
KVM: selftests: Change MDSCR_EL1 register holding variables as uint64_t
arm64/debug: Drop redundant DBG_MDSCR_* macros
* for-next/vmap-stack:
: Force VMAP_STACK on arm64
arm64: remove CONFIG_VMAP_STACK checks from entry code
arm64: remove CONFIG_VMAP_STACK checks from SDEI stack handling
arm64: remove CONFIG_VMAP_STACK checks from stacktrace overflow logic
arm64: remove CONFIG_VMAP_STACK conditionals from traps overflow stack
arm64: remove CONFIG_VMAP_STACK conditionals from irq stack setup
arm64: Remove CONFIG_VMAP_STACK conditionals from THREAD_SHIFT and THREAD_ALIGN
arm64: efi: Remove CONFIG_VMAP_STACK check
arm64: Mandate VMAP_STACK
arm64: efi: Fix KASAN false positive for EFI runtime stack
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
Monitors generated with dot2k have their registration function (the one
called during monitor initialisation) return always 0, even if the
registration failed on RV side.
This can hide potential errors.
Return the value returned by the RV register function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-6-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The current behaviour of rvgen when running with the -a option is to
append the necessary lines at the end of the configuration for Kconfig,
Makefile and tracepoints.
This is not always the desired behaviour in case of nested monitors:
while tracepoints are not affected by nesting and the Makefile's only
requirement is that the parent monitor is built before its children, in
the Kconfig it is better to have children defined right after their
parent, otherwise the result has wrong indentation:
[*] foo_parent monitor
[*] foo_child1 monitor
[*] foo_child2 monitor
[*] bar_parent monitor
[*] bar_child1 monitor
[*] bar_child2 monitor
[*] foo_child3 monitor
[*] foo_child4 monitor
Adapt rvgen to look for a different marker for nested monitors in the
Kconfig file and append the line right after the last sibling, instead
of the last monitor.
Also add the marker when creating a new parent monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-5-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dot2c.py script generates all states in a single line. This breaks the
100 column limit when the state machines are non-trivial.
Change dot2c.py to generate the states in separate lines in case the
generated line is going to be too long.
Also adapt existing monitors with line length over the limit.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-4-gmonaco@redhat.com
Suggested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently the userspace RV tool starts a monitor and waits for the user
to press Ctrl-C (SIGINT) to terminate and stop the monitor.
This doesn't account for a scenario where a user starts RV in background
and simply kills it (SIGTERM unless the user specifies differently).
E.g.:
# rv mon wip &
# kill %
Would terminate RV without stopping the monitor and next RV executions
won't start correctly.
Register the signal handler used for SIGINT also to SIGTERM.
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, the userspace RV tool skips trace events triggered by the RV
tool itself, this can be changed by passing the parameter -s, which sets
the variable config_my_pid to 0 (instead of the tool's PID).
This has the side effect of skipping events generated by idle (PID 0).
Set config_my_pid to -1 (an invalid pid) to avoid skipping idle.
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-2-gmonaco@redhat.com
Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
ltl2k generates all variable definition in both ltl_start() and
ltl_possible_next_states(). However, these two functions may not use all
the variables, causing "unused variable" compiler warning.
Change the script to only generate used variables.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/636b2b2d99a9bd46a9f77a078d44ebd7ffc7508c.1752850449.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a variable appears multiple times in the specification, ltl2k generates
multiple variable definitions. This fails the build.
Make sure each variable is only defined once.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/107dcf0d0aa8482d5fbe0314c3138f61cd284e91.1752850449.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The 'next' operator is a unary operator. It is defined as: "next time, the
operand must be true".
Support this operator. For RV monitors, "next time" means the next
invocation of ltl_validate().
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/9c32cec04dd18d2e956fddd84b0e0a2503daa75a.1752239482.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add support for generating RV monitors from linear temporal logic, similar
to the generation of deterministic automaton monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/f3c63b363ff9c5af3302ba2b5d92a26a98700eaf.1751634289.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Both container generation and DA monitor generation is implemented in the
class dot2k. That requires some ugly "if is_container ... else ...". If
linear temporal logic support is added at the current state, the "if else"
chain is longer and uglier.
Furthermore, container generation is irrevelant to .dot files. It is
therefore illogical to be implemented in class "dot2k".
Clean it up, restructure the dot2k class into the following class
hierarchy:
(RVGenerator)
/\
/ \
/ \
/ \
/ \
(Container) (Monitor)
/\
/ \
/ \
/ \
(dot2k) [ltl2k] <- intended
This allows a simple and clean integration of LTL.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/692137a581ba6bee7a64d37fb7173ae137c47bbd.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
To simply the scripts and to allow easy integration of new monitor types,
restructure the template files as followed:
1. Move the template files to be in the same directory as the rvgen
package. Furthermore, the installation will now only install the
templates to the package directory, not /usr/share/. This simplify
templates reading, as the scripts do not need to find the templates at
multiple places.
2. Move dot2k_templates/* to:
- templates/dot2k/
- templates/container/
This allows sharing templates reading code between DA monitor generation
and container generation (and any future generation type).
For template files which can be shared between different generation
types, support putting them in templates/
This restructure aligns with the recommendation from:
https://python-packaging.readthedocs.io/en/latest/non-code-files.html
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/462d90273f96804d3ba850474877d5f727031258.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dot2k tool has some code that can be reused for linear temporal logic
monitor. Prepare its frontend for LTL inclusion:
1. Rename to be generic: rvgen
2. Replace the parameter --dot with 2 parameters:
--class: to specific the monitor class, can be 'da' or 'ltl'
--spec: the monitor specification file, .dot file for DA, and .ltl
file for LTL
The old command:
python3 dot2/dot2k monitor -d wip.dot -t per_cpu
is equivalent to the new commands:
python3 rvgen monitor -c da -s wip.dot -t per_cpu
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/dea18f7a44374e4db8df5c7e785604bc3062ffc9.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
dot2k is used for both generating deterministic automaton (DA) monitor and
generating container monitor.
Generating DA monitor and generating container requires different
parameters. This is implemented by peeking at sys.argv and check whether
"--container" is specified, and use that information to make some
parameters optional or required.
This works, but is quite hacky and ugly.
Replace this hack with Python's built-in subparsers.
The old commands:
python3 dot2/dot2k -d wip.dot -t per_cpu
python3 dot2/dot2k -n sched --container
are equivalent to the new commands:
python3 dot2/dot2k monitor -d wip.dot -t per_cpu
python3 dot2/dot2k container -n sched
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/23c4e3c6e10c39e86d8e6a289208dde407efc4a8.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
str.join() can do what __buff_to_string() does. Therefore replace
__buff_to_string() to make the scripts more pythonic.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/860d6002659f604c743e0f23d5cf3c99ea6a82d8.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A generated container's Kconfig has an incorrect line:
select DA_MON_EVENTS_IMPLICIT
This is due to container generation uses the same template Kconfig file as
deterministic automaton monitor.
Therefore, make a separate Kconfig template for container which has only
the necessaries for container.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/d54fd7ee120785bec5695220e837dbbd6efb30e5.1751634289.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently we add padding between the bootconfig text and footer to
ensure that the footer is aligned within the initramfs image.
However, because only the bootconfig data is held in memory, not the
full initramfs image, the footer may not be naturally aligned in
memory.
This can result in an alignment fault (SIGBUS) when writing the footer
on some architectures, such as sparc.
Build the footer in a struct on the stack before adding it to the
buffer.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sparc64&ver=6.16%7Erc7-1%7Eexp1&stamp=1753209801&raw=0
Link: https://lore.kernel.org/all/aIC-NTw-cdm9ZGFw@decadent.org.uk/
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
This patch adds selftests to cover invalid narrower loads on the
context. These used to cause kernel warnings before the previous patch.
To trigger the warning, the load had to be aligned, to read an affected
context field (ex., skb->sk), and not starting at the beginning of the
field.
The nine new cases all fail without the previous patch.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/44cd83ea9c6868079943f0a436c6efa850528cc1.1753194596.git.paul.chaignon@gmail.com
|
|
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa78 ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update configuration of tc-tests and preload DualPI2 module for self-tests,
and add following self-test cases for DualPI2:
Test a4c7: Create DualPI2 with default setting
Test 1ea4: Create DualPI2 with memlimit
Test 2130: Create DualPI2 with typical_rtt and max_rtt
Test 90c1: Create DualPI2 with max_rtt
Test 7b3c: Create DualPI2 with any_ect option
Test 49a3: Create DualPI2 with overflow option
Test d0a1: Create DualPI2 with drop_enqueue option
Test f051: Create DualPI2 with no_split_gso option
Test 456b: Create DualPI2 with packet step_thresh
Test 610c: Create DualPI2 with packet min_qlen_step
Test b4fa: Create DualPI2 with packet coupling_factor
Test 37f1: Create DualPI2 with packet classic_protection
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250722095915.24485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace exit code check with '! cmd' and add both quote and $(...)
around 'nproc' to prevent warning and issue reported by shellcheck.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netdevsim emulates firmware update and it takes 5 seconds to complete.
For some use cases, this is too long and unnecessary. Allow user to
configure the time by exposing debugfs a knob to set chunk time.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250722091945.79506-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink_nl_rate_tc_bw_parse function uses a large stack array for
devlink attributes, which triggers a warning about excessive stack
usage:
net/devlink/rate.c: In function 'devlink_nl_rate_tc_bw_parse':
net/devlink/rate.c:382:1: error: the frame size of 1648 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Introduce a separate attribute set specifically for rate TC bandwidth
parsing that only contains the two attributes actually used: index
and bandwidth. This reduces the stack array from DEVLINK_ATTR_MAX
entries to just 2 entries, solving the stack usage issue.
Update devlink selftest to use the new 'index' and 'bw' attribute names
consistent with the YAML spec.
Example usage with ynl with the new spec:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"index": 0, "bw": 50},
{"index": 1, "bw": 50},
{"index": 2, "bw": 0},
{"index": 3, "bw": 0},
{"index": 4, "bw": 0},
{"index": 5, "bw": 0},
{"index": 6, "bw": 0},
{"index": 7, "bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'bw': 50, 'index': 0},
{'bw': 50, 'index': 1},
{'bw': 0, 'index': 2},
{'bw': 0, 'index': 3},
{'bw': 0, 'index': 4},
{'bw': 0, 'index': 5},
{'bw': 0, 'index': 6},
{'bw': 0, 'index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Fixes: 566e8f108fc7 ("devlink: Extend devlink rate API with traffic classes bandwidth management")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/netdev/20250708160652.1810573-1-arnd@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507171943.W7DJcs6Y-lkp@intel.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Tested-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/1753175609-330621-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The header files rblist.h is included twice in stat-shadow.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22933
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250723070418.2195172-1-yang.lee@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
'torture-scripts.16.07.2025', 'srcu.19.07.2025', 'rcu.nocb.18.07.2025' and 'refscale.07.07.2025' into rcu.merge.23.07.2025
|
|
This file was missing the shebang line, so added it.
Link: https://lore.kernel.org/all/20250722225351.8811-1-unixbhaskar@gmail.com/
[Masami: changed title. ]
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Use "#!/usr/bin/env bash" instead of "#!/bin/bash". Needed for testing
in nix environments as they only provide /usr/bin/env at the standard
location.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Check PGTY_slab instead of PG_slab.
Fixes: 4ffca5a96678 (mm: support only one page_type per page)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250611155916.2579160-11-willy@infradead.org
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The test is supposed to observe that the 'clash_resolve' stat counter
incremented (i.e., the code path was covered).
This check was incorrect, 'conntrack -S' needs to be called in the
revevant namespace, not the initial netns.
The clash resolution logic in conntrack is only exercised when multiple
packets with the same udp quadruple race. Depending on kernel config,
number of CPUs, scheduling policy etc. this might not trigger even
after several retries. Thus the script eventually returns SKIP if the
retry count is exceeded.
The udpclash tool with also exit with a failure if it did not observe
the expected number of replies.
In the script, make a note of this but do not fail anymore, just check if
the clash resolution logic triggered after all.
Remove the 'single-core' test: while unlikely, with preemptible kernel it
should be possible to also trigger clash resolution logic.
With this change the test will either SKIP or pass.
Hard error could be restored later once its clear whats going on, so
also dump 'conntrack -S' when some packets went missing to see if
conntrack dropped them on insert.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250721223652.6956-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FILENAME_MAX is the same as PATH_MAX (4kb) in glibc rather than
NAME_MAX's 255. Switch to using NAME_MAX and ensure the '\0' is
accounted for in the path's buffer size.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250717150855.1032526-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
FILENAME_MAX is the same as PATH_MAX (4kb) in glibc rather than
NAME_MAX's 255. Switch to using NAME_MAX and ensure the '\0' is
accounted for in the path's buffer size.
Fixes: 754baf426e09 ("perf pmu: Change aliases from list to hashmap")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250717150855.1032526-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
FILENAME_MAX is often PATH_MAX (4kb), far more than needed for the
/proc path. Make the buffer size sufficient for the maximum integer
plus "/proc/" and "/status" with a '\0' terminator.
Fixes: 5ce42b5de461 ("tools subcmd: Add non-waitpid check_if_command_finished()")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250717150855.1032526-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test to validate the headroom adjustment support for both extension
and the shrinking cases. For the extension part, eat up space from
the start of payload data whereas, for the shrinking part, populate
the newly available space with a tag. In the user-space, validate that a
test string is manipulated accordingly.
The negative and positive offset values result in shrinking and growing of
headroom (growing and shrinking of payload) respectively.
TAP version 13
1..9
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: pkt_sz 512, ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Failed run: pkt_sz 512, ... offset -128. Reason: Adjustment failed
ok 8 xdp.test_xdp_native_adjst_head_grow_data
\# Failed run: pkt_sz (512) > HDS threshold (0) and offset 64 > 48
ok 9 xdp.test_xdp_native_adjst_head_shrnk_data
\# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate support for the two cases of tail adjustment: 1)
tail extension, and 2) tail shrinking across different frame sizes and
offset values. For each of the two cases, test both the single and
multi-buffer cases by choosing appropriate packet size.
The negative offset value result in growing of tailroom (shrinking of
payload) while the positive offset result in shrinking of tailroom
(growing of payload).
Since the support for tail adjustment varies across drivers, classify the
test as pass if at least one combination of packet size and offset from a
pre-selected list results in a successful run. In case of an unsuccessful
run, report the failure and highlight the packet size and offset values
that caused the test to fail, as well as the values that resulted in the
last successful run.
Note: The growing part of this test for netdevsim may appear flaky when
the offset value is larger than 1. This behavior occurs because tailroom
is not explicitly reserved for netdevsim, with 1 being the typical
tailroom value. However, in certain cases, such as payload being the last
in the page with additional available space, the truesize is expanded.
This also result increases the tailroom causing the test to pass
intermittently. In contrast, when tailrrom is explicitly reserved, such
as in the of fbnic, the test results are deterministic.
./drivers/net/xdp.py
TAP version 13
1..7
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: ... successful run: ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to verify the XDP_TX functionality by generating traffic from a
remote node on a specific UDP port and redirecting it back to the sender.
./drivers/net/xdp.py
TAP version 13
1..5
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test XDP_PASS/DROP in single buffer and multi buffer mode when
XDP native support is available.
./drivers/net/xdp.py
TAP version 13
1..4
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
\# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change adds support for new funcgraph tracer options funcgraph-args,
funcgraph-retval, funcgraph-retval-hex and funcgraph-retaddr.
The new added options are:
- args : Show function arguments.
- retval : Show function return value.
- retval-hex : Show function return value in hexadecimal format.
- retaddr : Show function return address.
# ./perf ftrace -G vfs_write --graph-opts retval,retaddr
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
5) | mutex_unlock() { /* <-rb_simple_write+0xda/0x150 */
5) 0.188 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cf90e */
5) | rt_mutex_slowunlock() { /* <-rb_simple_write+0xda/0x150 */
5) | _raw_spin_lock_irqsave() { /* <-rt_mutex_slowunlock+0x4f/0x200 */
5) 0.123 us | preempt_count_add(); /* <-_raw_spin_lock_irqsave+0x23/0x90 ret=0x0 */
5) 0.128 us | local_clock(); /* <-__lock_acquire.isra.0+0x17a/0x740 ret=0x3bf2a3cfc8b */
5) 0.086 us | do_raw_spin_trylock(); /* <-_raw_spin_lock_irqsave+0x4a/0x90 ret=0x1 */
5) 0.845 us | } /* _raw_spin_lock_irqsave ret=0x292 */
5) | _raw_spin_unlock_irqrestore() { /* <-rt_mutex_slowunlock+0x191/0x200 */
5) 0.097 us | local_clock(); /* <-lock_release+0x2ad/0x440 ret=0x3bf2a3cff1f */
5) 0.086 us | do_raw_spin_unlock(); /* <-_raw_spin_unlock_irqrestore+0x23/0x60 ret=0x1 */
5) 0.104 us | preempt_count_sub(); /* <-_raw_spin_unlock_irqrestore+0x35/0x60 ret=0x0 */
5) 0.726 us | } /* _raw_spin_unlock_irqrestore ret=0x80000000 */
5) 1.881 us | } /* rt_mutex_slowunlock ret=0x0 */
5) 2.931 us | } /* mutex_unlock ret=0x0 */
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250613114048.132336-1-changbin.du@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test_kexec_jump program builds correctly when invoked from the top-level
selftests/Makefile, which explicitly sets the OUTPUT variable. However,
building directly in tools/testing/selftests/kexec fails with:
make: *** No rule to make target '/test_kexec_jump', needed by 'test_kexec_jump.sh'. Stop.
This failure occurs because the Makefile rule relies on $(OUTPUT), which is
undefined in direct builds.
Fix this by listing test_kexec_jump in TEST_GEN_PROGS, the standard way to
declare generated test binaries in the kselftest framework. This ensures the
binary is built regardless of invocation context and properly removed by
make clean.
Link: https://lore.kernel.org/r/20250702171704.22559-2-moonhee.lee.ca@gmail.com
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
|
|
There is a spelling mistake in a ksft_exit_fail_msg() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250715130627.1907017-1-colin.i.king@gmail.com
|
|
The kernel does not provide sys_futex() on 32-bit architectures that do not
support 32-bit time representations, such as riscv32.
As a result, glibc cannot define SYS_futex, causing compilation failures in
tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in
such cases to ensure successful compilation and compatibility.
Signed-off-by: Cynthia Huang <cynthia@andestech.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com
|
|
The ABI for disabling streaming mode via ptrace is to do a write via the
SVE register set. Following the recent round of fixes to the ptrace code
we don't support this operation on systems without SVE, which is detected
as failures by fp-ptrace. Update the program so that it knows that this
operation is not currently supported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-3-3b96dd19a503@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
