| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Several vendor drivers have a requirement to send a synchronous raw HCI
reset with HCI_INIT_TIMEOUT.
Add a dedicated __hci_reset_sync() for them to use.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_cmd_sync_dequeue_once() had a single in-tree caller,
hci_cancel_connect_sync(), which now holds cmd_sync_work_lock across the
in-flight create flag test and the dequeue and so open-codes the lookup
and cancel under that lock. That leaves the exported
hci_cmd_sync_dequeue_once() with no in-tree user, so remove it along with
its declaration.
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Simplify 'force_no_mitm_write()' by using the convenient
'kstrtobool_from_user()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Enable compiler context analysis for Bluetooth subsystem and drivers.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add minimal compiler context analysis annotations, required for
compilation to pass.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add minimal compiler context analysis annotations, required for
compilation to pass.
Don't check complex conn->lock usage in l2cap_sock_shutdown(). The
analysis cannot know that chan->conn pointer is never replaced by a
different l2cap_conn.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add minimal compiler context analysis annotations, required for
compilation to pass.
compiler-context-analysis.h doesn't have tools to deal with the
conditional SRCU locking on return value used here, so just disable the
analysis in places instead of refactoring, in order to not make code
changes here.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add minimal compiler context analysis annotations, required for
compilation to pass.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix BPF verifier to preserve full pointer state for commuted
scalar += pointer arithmetic (Yiyang Chen, Eduard Zingerman)
- Fix a use-after-free of request sockets in the BPF TCP iterator
batching (Jose Fernandez)
- Fix a use-after-free of sk_redir in the BPF sockmap send verdict
path (Chengfeng Ye)
- Fix a netns reference imbalance in the BPF conntrack kfuncs
(Chengfeng Ye)
- Fix bpf_get_fsverity_digest() dynptr assumptions and silent
digest truncation (Eric Biggers)
- Fix bpf_tcp_{gen,check}_syncookie to check sk_state before
sk_protocol to make sure it is a full socket (Luxiao Xu)
- Fix rqspinlock to reset the tail when preserving the queue
on deadlock (Kumar Kartikeya Dwivedi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rqspinlock: Reset tail when preserving queue on deadlock
bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie
fsverity: Fix silent truncation in bpf_get_fsverity_digest()
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()
bpf: Fix netns reference imbalance in conntrack kfuncs
bpf, sockmap: Fix sk_redir use-after-free in send verdict
selftests/bpf: Cover commuted pointer state propagation
bpf: Propagate untrusted pointer state in commuted arithmetic
bpf: Preserve pointer state for commuted arithmetic
bpf: Simplify sanitize_err() signature
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bunch more work, of note:
- iwlwifi: new FW version support
- mt76:
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- rtw89:
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- ath12k: AHB platform MultiPD support
- cfg80211: pre-assign cookies for operations
- mac80211: AQL support for multicast
* tag 'wireless-next-2026-08-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (403 commits)
wifi: nxpwifi: bound uAP association event IEs to the event buffer
wifi: nxpwifi: detach sync command buffer on interrupted wait
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
wifi: rsi: Fix types to appease CFI
wifi: mac80211: skip default WMM setup for AP_VLAN links
wifi: nxpwifi: fix multiple static analysis errors and warnings
wifi: morsemicro: MM81X should be invisible and selected by its users
wifi: nxp: NXPWIFI should be invisible and selected by its users
wifi: cfg80211: stop PMSR before P2P and NAN teardown
wifi: mac80211: disconnect on CSA to channel 0
wifi: brcmfmac: fix P2P action frame handling without device vif
wifi: brcmfmac: Set DMA direction for msgbuf packet IDs
wifi: brcmfmac: validate msgbuf flowring IDs before use
wifi: mac80211: fix RCU usage in peer probing
wifi: mac80211: fix RCU dereference in throughput estimate
wifi: wilc1000: validate monitor transmit frame headers
wifi: mac80211: skip unused probe response countdown offsets
wifi: zd1211rw: reject secondary interfaces to prevent conflicts
wifi: nl80211: clean up color-change beacon data on errors
wifi: mac80211: send TWT teardown to peer after setup TX failure
...
====================
Link: https://patch.msgid.link/20260806121304.190084-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc7).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kyle Zeng reported that GC could free a dead SCC partially.
The scenario is as follows:
1) Create two SCCs:
X -. A <-> B
^--'
2) Run the following concurrently:
2-1) send() sk-B to sk-B from sk-X
2-2) close() both A and B
At 2-1), there is a small window where unix_add_edges()
publishes a new edge (B <-> B) to GC but its skb is not queued
by skb_queue_tail().
If 2-2) completes before skb_queue_tail() and GC is triggered,
it judges A <-> B as dead, but B is not freed because GC cannot
collect the not-yet-queued skb holding the B <-> B edge.
X -. A <-> B -. This edge is visible
^--' ^..' but skb is not
This itself is not a problem since the next GC run will judge
B as dead as well and free it finally.
X -. A <.> B -.
^--' ^--'
However, X's SCC forces the next GC to call unix_walk_scc_fast(),
and it iterates over A through B's scc_entry.
Let's unlink scc_entry before freeing the vertex in unix_del_edge().
Fixes: 4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
Reported-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Kyle Zeng <kylebot@openai.com>
Fixes: 4090fa373f0e ("af_unix: Replace garbage collection algorithm.").
Link: https://patch.msgid.link/20260804002155.2233594-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BPF_SOCK_OPS_RWND_INIT lets a sockops BPF program pick the initial TCP
receive window, e.g. to advertise a larger window up front in environments
where that is known to be safe. Today it is only effective for the passive
(listener) side; on the active (connect) side the value is computed and
then silently discarded.
On the passive path tcp_openreq_init_rwin() inflates full_space when the
program returns a non-zero window, so tcp_select_initial_window() can offer
it:
else if (full_space < (u64)rcv_wnd * mss)
full_space = min_t(u64, (u64)rcv_wnd * mss, INT_MAX);
tcp_select_initial_window() only clamps the requested window *down* to the
available space, so without inflating the space first the BPF reply can
never raise the offered window above tcp_full_space(sk).
tcp_connect_init() calls tcp_rwnd_init_bpf() but never inflates full_space,
so on connect() the requested window is clamped back to tcp_full_space(sk)
(~64KB at the default rcvbuf) and the program's value is ignored.
Inflate full_space in tcp_connect_init() as well; tp->advmss is the mss the
listener path uses (both are tcp_mss_clamp(tp, dst_metric_advmss(dst))).
Read full_space after tcp_rwnd_init_bpf() so a program that also adjusts
SO_RCVBUF is still reflected. Compute the inflated value in u64 and clamp
to INT_MAX to avoid overflow (full_space is int, rcv_wnd is u32), and
apply the same overflow fix to the existing listener-side computation.
tcp_select_initial_window() itself also computes init_rcv_wnd * mss in
32-bit when clamping the offered window down to the requested value. A
large requested window (init_rcv_wnd greater than ~2.9M segments at
1460 mss) wraps this multiply and collapses the offered window to a tiny
value, so compute it in u64 as well.
Signed-off-by: Tejas Birajdar <tejasbirajdar@meta.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260730220055.2946171-1-tejasbirajdar@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a signal interrupts a blocking send, tls_tx_records() treats the
resulting -ERESTARTSYS as a transmission failure and marks the socket
errored via tls_err_abort() with the raw error code. Later syscalls
return the kernel-internal errno 512 (ERESTARTSYS) to userspace, as the
signal it stems from is no longer pending during syscall exit and thus
never translated.
An interrupted send is not a connection error: the partially sent record
stays queued and is resent later. Interrupt error codes are therefore
excluded from the abort in the same way as -EAGAIN.
Fixes: b341ca51d267 ("tls: Fix tls_sw_sendmsg error handling")
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Link: https://patch.msgid.link/20260805063109.1772314-1-maxbr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Technically, it's illegal to take a ref on a netdev just because
we have a pointer on which we already hold a ref, with no other
protection. This is because our simple per-cpu refcount
implementation cannot atomically read the count.
Let's make sure we cancel outstanding work and never queue more
work for a device we know is dead. This way taking a ref on
a dev we know is on the netdev_work_list is always going to be safe.
Jiangshan Yi reports that the issues is caught by ref tracker infra
leading to a warning:
WARNING: lib/ref_tracker.c:322 at ref_tracker_free
WARNING: lib/ref_tracker.c:246 at ref_tracker_dir_exit
Reported-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://lore.kernel.org/20260731035135.3917308-2-yijiangshan@kylinos.cn
Fixes: 12c765be84d2 ("net: turn the rx_mode work into a generic netdev_work facility")
Link: https://patch.msgid.link/20260806022821.2079945-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_register_kobject() calls device_add(), which emits KOBJ_ADD and
wakes udev, but register_netdevice() only makes the device findable by
name later, in list_netdevice(). A udev worker that reacts to the uevent
can therefore run against a device that no lookup can find yet.
This used to be harmless because the ethtool ioctl took the rtnl_lock
when looking the device up, and register_netdevice() runs under rtnl, so
the worker simply blocked until registration finished. The commit in the
fixes tag moved the lookup out from under rtnl for ops-locked drivers.
Now there is a short window in register_netdevice() between
netdev_register_kobject() until list_netdevice() when the device is not
findable by name.
This was reproduced with the mlx5 driver on a kernel with KASAN enabled
during devlink reload: systemd-udevd's net_driver builtin gets -ENODEV
from ETHTOOL_GDRVINFO, which was preventing interface renaming.
Suppress the uevent in netdev_register_kobject() and emit it from
register_netdevice() next to rtmsg_ifinfo(). This is the last point in
register_netdevice() where no error can happen, so only fully registered
devices are announced: the registration error paths never reach it, and
the device_del() that unwinds them stays silent as well, leaving
userspace with neither an add nor a remove.
Fixes: f994752b1127 ("net: ethtool: optionally skip rtnl_lock on IOCTL path")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Link: https://patch.msgid.link/20260806080758.2039586-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_make_heartbeat_ack() caches the destination transport in
chunk->transport without taking a reference. When src_out_of_asoc_ok is
enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead
of being transmitted immediately.
If the peer transport is removed while the chunk is still queued,
sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing,
but only clears cached transport pointers in out_chunk_list. The queued
control chunk therefore retains a dangling transport pointer.
Once an ASCONF_ACK clears the suppression and the queued control chunk is
transmitted, SCTP dereferences the stale transport pointer, leading to a
use-after-free.
Fix this by also clearing chunk->transport for queued control chunks in
control_chunk_list when removing the transport.
Fixes: 8a07eb0a50ae ("sctp: Add ASCONF operation on the single-homed host")
Reported-by: Daniele Linguaglossa <danielelinguaglossa@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/7e1168cb722132152a29d47e5eafaeac4a3bf6f3.1785943120.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+53ecc09fb81df10ef4de@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53ecc09fb81df10ef4de
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260805131508.3227331-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tpacket_snd() reads dev->hard_header_len independently for skb
allocation and header construction in tpacket_fill_skb(). Concurrent
netdevice reconfiguration can therefore make the reserved headroom
smaller than the amount later pushed, or make copylen - hard_header_len
negative.
Snapshot hard_header_len once before processing ring frames and use it
for the frame limit, headroom allocation, copy length, and skb
construction. Pass the snapshot to tpacket_fill_skb().
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-4-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-3-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tls_decrypt_sg() advances msg->msg_iter when it maps user pages for
the optimistic TLS 1.3 zero-copy path. If the decrypted record turns
out not to be unpadded application data, tls_decrypt_sw() retries into
a kernel skb, but leaves the iterator advanced.
The subsequent copy from the skb then writes decrypted bytes again at
a later point in the caller iovecs while recvmsg() reports only the
post-retry length. A TLS peer can trigger this after the receiver
enables TLS_RX_EXPECT_NO_PAD.
Revert the iterator by the number of bytes consumed by the optimistic
mapping before retrying without zero-copy.
Add a selftest which sends a TLS 1.3 control record with
TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not
overwrite later iovecs beyond the returned length.
Fixes: ce61327ce989 ("tls: rx: support optimistic decrypt to user buffer with TLS 1.3")
Cc: stable@vger.kernel.org
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Link: https://patch.msgid.link/20260804125528.2139928-1-Jeremy.Jean@oss.cyber.gouv.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills
the plaintext sk_msg ring, it does not set full_record, so the record is
left full and unpushed. A later splice() then adds to an already full
ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps
onto sg.start and the ring appears empty. Fragments added after that
overwrite live entries, and sg.size no longer matches what is reachable
between sg.start and sg.end, so pushing the record runs the scatterwalk off
the end of the scatterlist.
An unprivileged user can trigger this on a loopback TCP socket with the
"tls" ULP attached:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0
Call Trace:
skcipher_walk_next+0x1d1/0x2c0
gcm_encrypt_aesni_avx+0x1e9/0x220
bpf_exec_tx_verdict+0x3bb/0x860
tls_sw_sendmsg+0xa1a/0xca0
__sys_sendto+0x1da/0x1f0
Set full_record in the copy path when the ring becomes full, and push a
record that is already full on entry to the sendmsg loop.
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: fe1e81d4f73b ("tls/sw: Support MSG_SPLICE_PAGES")
Cc: stable@vger.kernel.org
Signed-off-by: chanyoung <ppoo1220@gmail.com>
Link: https://patch.msgid.link/20260804052837.49015-2-ppoo1220@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Link: https://patch.msgid.link/6b2afef5d1738763c6965e8e466eb16e43e4f956.1785757386.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"),
errors in the receive path prior to queueing skbs into the receive
queue do not trigger forward-allocated memory reclaiming.
Prevent forward memory from growing unboundedly in pathological drop
scenarios by explicitly reclaiming memory when skbs are dropped.
Fixes: 9db5b3cec4ec ("mptcp: borrow forward memory from subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-8-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Passive TCP Fast Open accepts a valid-cookie SYN even when it carries
no data. In that case the child socket's receive queue is intentionally
left empty.
mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking
for queued SYN data. That made data-less TFO SYNs hit a WARN and, if
the warning was non-fatal, left stale MPTFO state behind. The stale
flag could later trigger a state-confusion bug in
check_fully_established().
Only mark the subflow as MPTFO after confirming that an SKB was queued.
Return quietly when the receive queue is empty.
Note that mptcp_subflow_context's is_mptfo field is now not just about
subflows where the TFO was present, but about MPTFO subflow that
consumed SYN data. Only having a valid cookie but not carrying data is
not really "doing TFO".
Fixes: 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-7-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.
A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which
invokes mptcp_destroy_common() without dropping the sock refcount,
before the handler completes.
If the lock acquisitions interleave such that mptcp_pm_destroy() empties
a list first, the later alloc adds its entry to a list head that nothing
else iterates for this msk, and the entry leaks. kmemleak reports both
mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and
mptcp_pm_addr_entry objects (from
mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent
ANNOUNCE + close load against the userspace PM.
Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by
mptcp_pm_destroy() under pm.lock before the lists are emptied and
checked under pm.lock by the alloc paths. Either the alloc takes pm.lock
first, in which case its entry is on the list when mptcp_pm_destroy()
frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the
later alloc observes the bit and refuses.
Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).
Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The timer callback reads entry->retrans_times outside pm.lock to decide
whether to call mptcp_pm_subflow_established(). Since
mptcp_pm_announced_del_timer() can concurrently set retrans_times =
ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists.
I discovered this issue while studying the code. AI tools helped me to
verify the issue can potentially happen under race conditions.
Use a local 'retransmit' flag set inside pm.lock to capture whether
retransmission is still possible when the lock is taken. This allows to
call mptcp_pm_subflow_established() accordingly, and not depending on
the situation that can be different when checked outside the pm.lock.
Fixes: 348d5c1dec60 ("mptcp: move to next addr when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the parent commit ("mptcp: avoid combining some incoming
suboptions"), the parsing step no longer allow to have both the
MP_CAPABLE and MP_JOIN suboptions set together.
These chunks are now unreachable, these checks can then be removed.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-3-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN.
Fixes: eda7acddf808 ("mptcp: Handle MPTCP TCP options")
Cc: stable@vger.kernel.org
Link: https://www.rfc-editor.org/rfc/rfc8684.html#section-3.5-5.1 [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-2-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size.
Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260728-net-mptcp-misc-fixes-7-2-rc6-v1-0-f7e2d229159d%40kernel.org?part=1
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-1-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current limit of 64 is not enough for Sony Xperia 10 VII (SM6475).
After merging v6.6.142 into a downstream AOSP device, it's stuck on
boot animation and following log spam can be observed in dmesg:
E qrtr : ctrl_cmd_new_lookup(): QRTR client node exceeds max lookup limit!
E qrtr : qrtr_ns_worker(): failed while handling packet from 1:16600
No idea why it needs more than 64 client lookups, but it appears to
work fine with 128 as it did when there were no limits.
I don't really have a good way to investigate what it needs all
these lookups for as most of the userspace is closed source.
Fixes: 5640227d9a21 ("net: qrtr: ns: Limit the maximum number of lookups")
Signed-off-by: Łukasz Patron <priv.luk@gmail.com>
Link: https://patch.msgid.link/20260804201919.1148015-1-priv.luk@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zijie Huang <milkory@outlook.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/1e9ab39597423fd5d13cfaaf52279b8ee3d9fc3c.1785434373.git.milkory@outlook.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only user was vport-gre in openvswitch and now it is gone.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-6-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since removal of legacy tunnel vport types only the built-in ones
remain. So, there is no need for the extra infrastructure for dynamic
module loading. Can be reinstated in the future if we need a new
vport type.
Note: It is technically possible that someone has an out-of-tree
module named vport-type-N that implements a different vport type.
At this time we're not aware of anyone doing that. People running
out-of-tree modules normally just have an out-of-tree openvswitch
module as a whole. And there are actually no supported out-of-tree
implementations of the openvswitch module known to the community.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-4-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since removal of tunnel vport types, there aren't any vports that
support options. Let's remove the options-related infrastructure.
Can be reinstated if we ever need a new vport type or if we need extra
options for the existing ones. The uAPI attribute remains.
Clarification comment is added to highlight that none of the supported
vports support options at the moment.
If the options are provided, the code now directly replies with
-EOPNOTSUPP to keep the behavior the same for remaining vport types.
Note: It is technically possible that someone has an out-of-tree module
named vport-type-N that implements a different vport type and they have
options for this vport type. However, our message size calculations do
not account for whatever options such a port would have and so it is
dangerous to load such a module without modifying the code in the main
datapath.c, unless the options are smaller than the ones we had for
vxlan. A more robust solution would be to have a different version of
the entire openvswitch module instead, so the use case of a separate
vport-type-N loaded with the upstream openvswitch module is unlikely.
At this time we're not aware of anyone doing that.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-3-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ovs-vswitchd doesn't use OVS_VPORT_TYPE_GRE/VXLAN/GENEVE with the
Linux kernel module since adding support for standard tunnel devices
with COLLECT_METADATA back in 2017. The code to use them was only
activated as a fallback for old kernels, so not used in practice. And
it is now fully removed in the upcoming OVS 4.0 release.
Modern way to use tunnels with OVS is to create standard tunnel ports
with RTM_NEWLINK + COLLECT_METADATA and add them as OVS_VPORT_TYPE_NETDEV.
Device reference management and the netlink options parsing for these
legacy port types is complicated and was a CVE magnet in the previous
release cycles. Existence of these modules also makes locking analysis
for geneve module and other core tunnel devices unnecessarily more
complicated, especially in light of migration to per-netns locking.
Since there are no actual users for these port types for a very long
time, let's just remove the support entirely. There is no practical
reason to run OVS from 2017 on a recent kernel.
While it's technically a uAPI change in some sense, from the user's
perspective this removal looks indistinguishable from the kernel built
with CONFIG_OPENVSWITCH_GENEVE/VXLAN/GRE disabled. And it seems like
removal of unused drivers/modules is not a rare event these days.
A comment is added to the uAPI header noting that standard RTM_NEWLINK
with COLLECT_METADATA followed by OVS_VPORT_CMD_NEW with the simple
OVS_VPORT_TYPE_NETDEV should be used instead.
Modules responsible for these tunnel ports are removed as well as
selftests covering this functionality. Further cleanups will follow.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260804182049.2289754-2-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
struct bvec_iter::bi_bvec_done is used an offset in the current bvec,
let's rename it accordingly for better clarity. I also plan to use it
for non-bvec based iteration in the future like dma-buf, so drop the
"bvec" part.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/4e4c21858705a200bd8848ffe4080522e3eb5c1c.1786018753.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
AP_VLAN interfaces are never passed to the driver, so setting default WMM
parameters on their links trips the check-sdata-in-driver warning in
drv_conf_tx(), as well as in the BSS_CHANGED_QOS link info notification.
Skip it, matching the existing AP_VLAN handling in this function.
Fixes: 2259d14499d1 ("wifi: mac80211: set default WMM parameters on all links")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260804082608.2011433-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock.
Fixes: fd57770dd198 ("net/smc: wait for pending work before clcsock release_sock")
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260803070701.126339-1-sidraya@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sk_mc_loop() can be called for sockets that are neither AF_INET
nor AF_INET6 (e.g. AF_PACKET sockets when sending packets via raw/packet
socket over virtual devices such as VRF or ipvlan).
In such cases, sk_family is not AF_INET/AF_INET6 and sk_mc_loop() falls
through the switch statement and triggers WARN_ON_ONCE(1).
Non-INET sockets do not support IP_MULTICAST_LOOP or IPV6_MULTICAST_LOOP
options, so loopback should default to true without generating a warning.
Fixes: f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Reported-by: syzbot+22c3218a6fa219e47321@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a72024c.13623e66.bdc14.0019.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260804152048.2134341-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rtnl_fill_vf() emits one IFLA_VF_INFO per VF into the IFLA_VFINFO_LIST
nest and closes it with nla_nest_end(), which stores the accumulated
length into nla_len. That field is a u16, so a nest larger than 65535
bytes is written truncated modulo 65536. The list dates back to commit
c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") in 2010
and has never been able to describe an arbitrary number of VFs; nothing
regressed, the encoding simply cannot represent it.
Nothing catches it on the way. if_nlmsg_size() adds rtnl_vfinfo_size()
for every VF, so the skb really is large enough and none of the nla_put()
calls fails. Userspace then walks the message with RTA_NEXT(), which
advances by the stored length, so parsing resumes inside VF payload and
the attributes after the nest are read out of VF data: IFLA_VF_PORTS,
IFLA_XDP, IFLA_LINKINFO, IFLA_PERM_ADDRESS, IFLA_AF_SPEC. iproute2
prints "!!!Deficit" and strictly validating parsers reject the message.
On CONFIG_DEBUG_NET kernels nla_nest_end() also splats, via the
DEBUG_NET_WARN_ON_ONCE() added in commit ff205bf8c554 ("netlink: add one
debug check in nla_nest_end()").
Where the wrap falls depends on what was asked for and on the host. A VF
costs 196 bytes, 296 with statistics, 236 with GUIDs and 336 with both,
and on a kernel without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS the
statistics carry a padding attribute each and cost 32 bytes more, making
those two 328 and 368. The nest therefore overflows somewhere between 179
and 335 VFs, and ice allows 256 per PF (ICE_MAX_SRIOV_VFS), which reaches
it. Statistics are included unless the request sets
RTEXT_FILTER_SKIP_STATS, so the common case is the one that wraps first.
A limit that moves with the requested attribute set and with the host's
alignment requirements is not something userspace can be told, so use
fixed numbers instead and document them as what the interface supports:
256 VFs, or 128 when statistics are included. Both stay well inside
U16_MAX even in the largest per-VF encoding, at 60416 and 47104 bytes
respectively. rtnl_vfinfo_cap() applies the cap in both places, so
rtnl_vfinfo_size() does not size the skb for VFs that will not be
emitted.
A device with more VFs than the limit reports a shorter
IFLA_VFINFO_LIST. IFLA_NUM_VF keeps carrying the real count, and
everything after the nest stays parsable, which is the part that is
broken today. An empty nest is already emitted for a PF with no VFs, so a
list shorter than IFLA_NUM_VF is not a new encoding.
Returning -EMSGSIZE instead, which is what nla_nest_end_safe() would
give, is not an option here: a nest that does not fit in a u16 will not
fit in a retried skb either, so it would turn a link dump on such a
device into a hard failure.
The other large nests in rtnl_fill_ifinfo() were audited and cannot
overflow. IFLA_AF_SPEC is bounded by a handful of address families at
about a kilobyte each, and IFLA_VF_PORTS would need more than 560 VFs,
which no in-tree driver allows.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/netdev/16b289f6-b025-5dd3-443d-92d4c167e79c@intel.com/
Assisted-by: Claude:claude-fable-5
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260801114944.115272-1-iprintercanon@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AF_XDP rings are allocated from setsockopt() and can be mapped into user
space. The shared xskq_create() helper allocates the ring backing memory,
but the user-controlled and long-lived allocation is not charged as kmem
to the allocating memory cgroup.
The current implementation uses vmalloc_user(), which allocates the
backing pages with GFP_KERNEL | __GFP_ZERO. Use the same VM_USERMAP
vmalloc path, but pass GFP_KERNEL_ACCOUNT so the ring backing pages are
attributed to memcg/kmem and can be constrained by existing cgroup memory
limits. This keeps the existing zeroing and mmap semantics while avoiding
AF_XDP-specific optmem or RLIMIT_MEMLOCK accounting.
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260731164623.4694-2-zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rds_info_getsockopt() reads a callback from rds_info_funcs and invokes it
without protecting the callback's lifetime. Transport modules register
functions stored in this array. For example, rds_tcp.ko registers
rds_tcp_tc_info() for RDS_INFO_TCP_SOCKETS.
This permits the following interleaving:
CPU0 CPU1
rds_info_getsockopt()
func = rds_tcp_tc_info
rmmod rds_tcp
rds_tcp_exit()
rds_info_deregister_func()
rds_info_funcs[offset] = NULL
free rds_tcp module text
func()
The reader can therefore branch to an address in unloaded module text.
Protect callback invocation with SRCU. Enter the SRCU read-side critical
section before loading the callback and leave it only after the callback
returns. Clear the callback with WRITE_ONCE() and call
synchronize_srcu() before deregistration returns, preventing module unload
from freeing its text while an old reader is still executing it. SRCU is
required because callbacks such as RDS_INFO_COUNTERS can sleep.
Keep the callback array unannotated and use READ_ONCE() and WRITE_ONCE()
for concurrent slot access so sparse does not have to apply __rcu through
the function-pointer typedef. Replace the two callback-slot BUG_ON()
checks with WARN_ON_ONCE() and return without changing the slot on
mismatch.
Link: https://lore.kernel.org/netdev/20260720184955.3008978-1-nicoyip.dev@gmail.com/
Suggested-by: Allison Henderson <achender@kernel.org>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Link: https://patch.msgid.link/20260801054234.3535077-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a function-like macro expands to an expression, that expression
doesn't need a semicolon after it. All uses have been verified to
have their own semicolons.
This was found using the following Coccinelle semantic patch:
@r@
identifier i : script:ocaml() { String.lowercase_ascii i = i };
expression e;
@@
*#define i(...) e;
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20260801191002.1383835-10-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack.
Fixes: e490d1d85cf5 ("[IPV6] IP6TUNNEL: Split out generic routine in ip6ip6_err().")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/fe1a5e765fbca88d69391887f0ed26a19e3e4d39.1785736562.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncsi_send_cmd_nl() takes the number of bytes to copy from the
attacker-controlled ncsi_pkt_hdr.length field of the in-band packet
header, while the source buffer is the NCSI_ATTR_DATA netlink
attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr).
The two length sources are never cross-checked: only
nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced.
With hdr->length set larger than the attribute payload (up to 65535
against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies
past the end of the netlink attribute buffer with unsafe_memcpy(),
leaking up to ~64KB of kernel heap memory into the transmitted NCSI
command packet. The destination skb is sized by the declared payload,
so the write side does not overflow - this is a pure OOB read /
information leak, reachable with CAP_NET_ADMIN on systems with a
registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where
NET_NCSI=y is standard).
Reject commands whose declared payload extends past the end of the
data attribute.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Fixes: 9771b8ccdfa6 ("net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command")
Reported-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20260803043618.3210301-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired.
Fixes: 3accf4762734 ("mac802154: Handle basic beaconing")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Incoming skbs passing through netfilter flowtable offload hooks (or XFRM
offload path) might already carry a ref-counted dst_entry assigned during
earlier RX or routing steps.
Calling skb_dst_set_noref() when skb already holds a ref-counted dst
overwrites skb->_skb_refdst, leaking the previous dst_entry reference
count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in
skb_dst_check_unset():
WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170
WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234
WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864
Drop any existing dst_entry reference with skb_dst_drop(skb) before
setting the non-referenced flowtable destination.
Fixes: 2a79fd3908ac ("netfilter: nf_flow_table: attach dst to skbs")
Reported-by: syzbot+76d4e3a055aec3b007ec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a71b141.9511d2ce.1fc5b9.033b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20260804093328.1831847-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen.
Fixes: 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260803061739.134737-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The external flag is part of the PCI SF port attributes, but unlike the
PCI PF and PCI VF flavours it was never filled into the port dump, so
userspace could not query it directly.
Reporting of the external flag was missed for SF ports. Hence, put
DEVLINK_ATTR_PORT_EXTERNAL for the PCI SF flavour as well, matching what
PCI PF and PCI VF ports already report.
$ devlink port show pci/0033:01:00.0/163840
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 external true splittable false
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Link: https://patch.msgid.link/20260803090012.257242-1-shayd@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
