| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For SWP_SYNCHRONOUS_IO devices, if a cache bypassing THP swapin failed due
to reasons like memory pressure, partially conflicting swap cache or ZSWAP
enabled, shmem will fallback to cached order 0 swapin.
Right now the swap cache still has a non-trivial overhead, and readahead
is not helpful for SWP_SYNCHRONOUS_IO devices, so we should always skip
the readahead and swap cache even if the swapin falls back to order 0.
So handle the fallback logic without falling back to the cached read.
Link: https://lkml.kernel.org/r/20250728075306.12704-6-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of keeping different paths of splitting the entry before the swap
in start, move the entry splitting after the swapin has put the folio in
swap cache (or set the SWAP_HAS_CACHE bit). This way we only need one
place and one unified way to split the large entry. Whenever swapin
brought in a folio smaller than the shmem swap entry, split the entry and
recalculate the entry and index for verification.
This removes duplicated codes and function calls, reduces LOC, and the
split is less racy as it's guarded by swap cache now. So it will have a
lower chance of repeated faults due to raced split. The compiler is also
able to optimize the coder further:
bloat-o-meter results with GCC 14:
With DEBUG_SECTION_MISMATCH (-fno-inline-functions-called-once):
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-143 (-143)
Function old new delta
shmem_swapin_folio 2358 2215 -143
Total: Before=32933, After=32790, chg -0.43%
With !DEBUG_SECTION_MISMATCH:
add/remove: 0/1 grow/shrink: 1/0 up/down: 1069/-749 (320)
Function old new delta
shmem_swapin_folio 2871 3940 +1069
shmem_split_large_entry.isra 749 - -749
Total: Before=32806, After=33126, chg +0.98%
Since shmem_split_large_entry is only called in one place now. The
compiler will either generate more compact code, or inlined it for
better performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move all THP swapin related checks under CONFIG_TRANSPARENT_HUGEPAGE, so
they will be trimmed off by the compiler if not needed.
And add a WARN if shmem sees a order > 0 entry when
CONFIG_TRANSPARENT_HUGEPAGE is disabled, that should never happen unless
things went very wrong.
There should be no observable feature change except the new added WARN.
Link: https://lkml.kernel.org/r/20250728075306.12704-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/shmem, swap: bugfix and improvement of mTHP swap in", v6.
The current THP swapin path have several problems. It may potentially
hang, may cause redundant faults due to false positive swap cache lookup,
and it issues redundant Xarray walks. !CONFIG_TRANSPARENT_HUGEPAGE builds
may also contain unnecessary THP checks.
This series fixes all of the mentioned issues, the code should be more
robust and prepared for the swap table series. Now 4 walks is reduced to
3 (get order & confirm, confirm, insert folio),
!CONFIG_TRANSPARENT_HUGEPAGE build overhead is also minimized, and comes
with a sanity check now.
The performance is slightly better after this series, sequential swap in
of 24G data from ZRAM, using transparent_hugepage_tmpfs=always (24 samples
each):
Before: avg: 10.66s, stddev: 0.04
After patch 1: avg: 10.58s, stddev: 0.04
After patch 2: avg: 10.65s, stddev: 0.05
After patch 3: avg: 10.65s, stddev: 0.04
After patch 4: avg: 10.67s, stddev: 0.04
After patch 5: avg: 9.79s, stddev: 0.04
After patch 6: avg: 9.79s, stddev: 0.05
After patch 7: avg: 9.78s, stddev: 0.05
After patch 8: avg: 9.79s, stddev: 0.04
Several patches improve the performance by a little, which is about ~8%
faster in total.
Build kernel test showed very slightly improvement, testing with make -j48
with defconfig in a 768M memcg also using ZRAM as swap, and
transparent_hugepage_tmpfs=always (6 test runs):
Before: avg: 3334.66s, stddev: 43.76
After patch 1: avg: 3349.77s, stddev: 18.55
After patch 2: avg: 3325.01s, stddev: 42.96
After patch 3: avg: 3354.58s, stddev: 14.62
After patch 4: avg: 3336.24s, stddev: 32.15
After patch 5: avg: 3325.13s, stddev: 22.14
After patch 6: avg: 3285.03s, stddev: 38.95
After patch 7: avg: 3287.32s, stddev: 26.37
After patch 8: avg: 3295.87s, stddev: 46.24
This patch (of 7):
Currently shmem calls xa_get_order to get the swap radix entry order,
requiring a full tree walk. This can be easily combined with the swap
entry value checking (shmem_confirm_swap) to avoid the duplicated lookup
and abort early if the entry is gone already. Which should improve the
performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After update of execmem_cache_free() that made memory writable before
updating it, there is no need to update read only memory, so the writable
parameter to execmem_fill_trapping_insns() is not needed. Drop it.
Link: https://lkml.kernel.org/r/20250713071730.4117334-7-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When execmem populates ROX cache it uses vmalloc(VM_ALLOW_HUGE_VMAP).
Although vmalloc falls back to allocating base pages if high order
allocation fails, it may happen that it still cannot allocate enough
memory.
Right now ROX cache is only used by modules and in majority of cases the
allocations happen at boot time when there's plenty of free memory, but
upcoming enabling ROX cache for ftrace and kprobes would mean that execmem
allocations can happen when the system is under memory pressure and a
failure to allocate large page worth of memory becomes more likely.
Fallback to regular vmalloc() if vmalloc(VM_ALLOW_HUGE_VMAP) fails.
Link: https://lkml.kernel.org/r/20250713071730.4117334-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
to avoid static declarations.
Link: https://lkml.kernel.org/r/20250713071730.4117334-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently execmem_cache_free() ignores potential allocation failures that
may happen in execmem_cache_add(). Besides, it uses text poking to fill
the memory with trapping instructions before returning it to cache
although it would be more efficient to make that memory writable, update
it using memcpy and then restore ROX protection.
Rework execmem_cache_free() so that in case of an error it will defer
freeing of the memory to a delayed work.
With this the happy fast path will now change permissions to RW, fill the
memory with trapping instructions using memcpy, restore ROX permissions,
add the memory back to the free cache and clear the relevant entry in
busy_areas.
If any step in the fast path fails, the entry in busy_areas will be marked
as pending_free. These entries will be handled by a delayed work and
freed asynchronously.
To make the fast path faster, use __GFP_NORETRY for memory allocations and
let asynchronous handler try harder with GFP_KERNEL.
Link: https://lkml.kernel.org/r/20250713071730.4117334-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some callers of execmem_alloc() require the memory to be temporarily
writable even when it is allocated from ROX cache. These callers use
execemem_make_temp_rw() right after the call to execmem_alloc().
Wrap this sequence in execmem_alloc_rw() API.
Link: https://lkml.kernel.org/r/20250713071730.4117334-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes", v3.
These patches enable use of EXECMEM_ROX_CACHE for ftrace and kprobes
allocations on x86.
They also include some ground work in execmem.
Since the execmem model for caching large ROX pages changed from the
initial assumption that the memory that is allocated from ROX cache is
always ROX to the current state where memory can be temporarily made RW
and then restored to ROX, we can stop using text poking to update it.
This also saves the hassle of trying lock text_mutex in
execmem_cache_free() when kprobes already hold that mutex.
This patch (of 8):
The execmem_update_copy() that used text poking was required when memory
allocated from ROX cache was always read-only. Since now its permissions
can be switched to read-write there is no need in a function that updates
memory with text poking.
Remove it.
Link: https://lkml.kernel.org/r/20250713071730.4117334-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20250713071730.4117334-2-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[surenb@google.com: v3]
Link: https://lkml.kernel.org/r/20250729145709.2731370-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250728175355.2282375-1-surenb@google.com
Fixes: 3104138517fc ("mm: make vma cache SLAB_TYPESAFE_BY_RCU")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/all/CAG48ez0-deFbVH=E3jbkWx=X3uVbd8nWeo6kbJPQ0KoUD+m2tA@mail.gmail.com/
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is dead code, which was used from commit b739f125e4eb ("i915: use
io_mapping_map_user") but reverted a month later by commit 0e4fe0c9f2f9
("Revert "i915: use io_mapping_map_user"") back in 2021.
Since then nobody has used it, so remove it.
[akpm@linux-foundation.org: update Documentation/core-api/mm-api.rst, per Vlastimil]
Link: https://lkml.kernel.org/r/20250725142901.81502-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use PTE batching to batch process PTEs mapping the same large folio. An
improvement is expected due to batching mapcount manipulation on the
folios, and for arm64 which supports contig mappings, the number of
TLB flushes is also reduced.
Note that we do not need to make a change to the check
"if (folio_page(folio, i) != page)"; if i'th page of the folio is equal
to the first page of our batch, then i + 1, .... i + nr_batch_ptes - 1
pages of the folio will be equal to the corresponding pages of our
batch mapping consecutive pages.
Link: https://lkml.kernel.org/r/20250724052301.23844-4-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use PTE batching to batch process PTEs mapping the same large folio. An
improvement is expected due to batching refcount-mapcount manipulation on
the folios, and for arm64 which supports contig mappings, the number of
TLB flushes is also reduced.
Link: https://lkml.kernel.org/r/20250724052301.23844-3-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Optimizations for khugepaged", v4.
If the underlying folio mapped by the ptes is large, we can process those
ptes in a batch using folio_pte_batch().
For arm64 specifically, this results in a 16x reduction in the number of
ptep_get() calls, since on a contig block, ptep_get() on arm64 will
iterate through all 16 entries to collect a/d bits. Next, ptep_clear()
will cause a TLBI for every contig block in the range via
contpte_try_unfold(). Instead, use clear_ptes() to only do the TLBI at
the first and last contig block of the range.
For split folios, there will be no pte batching; the batch size returned
by folio_pte_batch() will be 1. For pagetable split folios, the ptes will
still point to the same large folio; for arm64, this results in the
optimization described above, and for other arches, a minor improvement is
expected due to a reduction in the number of function calls and batching
atomic operations.
This patch (of 3):
Let's add variants to be used where "full" does not apply -- which will
be the majority of cases in the future. "full" really only applies if
we are about to tear down a full MM.
Use get_and_clear_ptes() in existing code, clear_ptes() users will
be added next.
Link: https://lkml.kernel.org/r/20250724052301.23844-2-dev.jain@arm.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Hold PTL in mincore_hugetlb() to avoid operating on stale page, as
mincore_pte_range() have done.
Link: https://lkml.kernel.org/r/20250724090958.455887-4-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Hold PTL in hwpoison_hugetlb_range() to avoid operating on stale page, as
hwpoison_pte_range() have done.
This change is not known to address any issues which users have
experienced.
Link: https://lkml.kernel.org/r/20250725033112.2690158-1-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The logic can be simplified - firstly by renaming the inconsistently named
apply_mm_seal() to mseal_apply().
We then wrap mseal_fixup() into the main loop as the logic is simple
enough to not require it, equally it isn't a hugely pleasant pattern in
mprotect() etc. so it's not something we want to perpetuate.
We eliminate the need for invoking vma_iter_end() on each loop by directly
determining if the VMA was merged - the only thing we need concern
ourselves with is whether the start/end of the (gapless) range are offset
into VMAs.
This refactoring also avoids the rather horrid 'pass pointer to prev
around' pattern used in mprotect() et al.
No functional change intended.
Link: https://lkml.kernel.org/r/ddfa4376ce29f19a589d7dc8c92cb7d4f7605a4c.1753431105.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Xu <jeffxu@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The check_mm_seal() function is doing something general - checking whether
a range contains only VMAs (or rather that it does NOT contain any
unmapped regions).
So rename this function to range_contains_unmapped().
Additionally simplify the logic, we are simply checking whether the last
vma->vm_end has either a VMA starting after it or ends before the end
parameter.
This check is rather dubious, so it is sensible to keep it local to
mm/mseal.c as at a later stage it may be removed, and we don't want any
other mm code to perform such a check.
No functional change intended.
[lorenzo.stoakes@oracle.com: add comment explaining why we disallow gaps on mseal()]
Link: https://lkml.kernel.org/r/d85b3d55-09dc-43ba-8204-b48267a96751@lucifer.local
Link: https://lkml.kernel.org/r/dd50984eff1e242b5f7f0f070a3360ef760e06b8.1753431105.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Drop the wholly unnecessary set_vma_sealed() helper(), which is used only
once, and place VMA_ITERATOR() declarations in the correct place.
Retain vma_is_sealed(), and use it instead of the confusingly named
can_modify_vma(), so it's abundantly clear what's being tested, rather
then a nebulous sense of 'can the VMA be modified'.
No functional change intended.
Link: https://lkml.kernel.org/r/98cf28d04583d632a6eb698e9ad23733bb6af26b.1753431105.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Xu <jeffxu@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The madvise() logic is inexplicably performed in mm/mseal.c - this ought
to be located in mm/madvise.c.
Additionally can_modify_vma_madv() is inconsistently named and, in
combination with is_ro_anon(), is very confusing logic.
Put a static function in mm/madvise.c instead - can_madvise_modify() -
that spells out exactly what's happening. Also explicitly check for an
anon VMA.
Also add commentary to explain what's going on.
Essentially - we disallow discarding of data in mseal()'d mappings in
instances where the user couldn't otherwise write to that data.
We retain the existing behaviour here regarding MAP_PRIVATE mappings of
file-backed mappings, which entails some complexity - while this, strictly
speaking - appears to violate mseal() semantics, it may interact badly
with users which expect to be able to madvise(MADV_DONTNEED) .text
mappings for instance.
We may revisit this at a later date.
No functional change intended.
Link: https://lkml.kernel.org/r/492a98d9189646e92c8f23f4cce41ed323fe01df.1753431105.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damos_va_migrate_dests_add() determines the node a folio should be in
based on the struct damos_migrate_dests associated with the migration
scheme and adds the folio to the linked list corresponding to that node so
it can be migrated later. Currently, folios are isolated and added to the
list even if they are already in the node they should be in.
In using damon weighted interleave more, I've found that the overhead of
needlessly adding these folios to the migration lists can be quite high.
The overhead comes from isolating folios and placing them in the migration
lists inside of damos_va_migrate_dests_add(), as well as the cost of
handling those folios in damon_migrate_pages(). This patch eliminates
that overhead by simply avoiding the addition of folios that are already
in their intended location to the migration list.
To show the benefit of this patch, we start the test workload and start a
DAMON instance attached to that workload with a migrate_hot scheme that
has one dest field sending data to the local node. This way, we are only
measuring the overheads of the scheme, and not the cost of migrating
pages, since data will be allocated to the local node by default. I
tested with two workloads: the embedding reduction workload used in [1]
and a microbenchmark that allocates 20GB of data then sleeps, which is
similar to the memory usage of the embedding reduction workload.
The time taken in damos_va_migrate_dests_add() and damon_migrate_pages()
each aggregation interval is shown below.
Before this patch:
damos_va_migrate_dests_add damon_migrate_pages
microbenchmark ~2ms ~3ms
embedding reduction ~1s ~3s
After this patch:
damos_va_migrate_dests_add damon_migrate_pages
microbenchmark 0us ~40us
embedding reduction 0us ~100us
I did not do an in depth analysis for why things are much slower in the
embedding reduction workload than the microbenchmark. However, I assume
it's because the embedding reduction workload oversaturates the bandwidth
of the local memory node, increasing the memory access latency, and in
turn making the pointer chasing involved in iterating through a linked
list much slower. Regardless of that, this patch results in a significant
speedup.
[1] https://lore.kernel.org/damon/20250709005952.17776-1-bijan311@gmail.com/
Link: https://lkml.kernel.org/r/20250725163300.4602-1-bijan311@gmail.com
Fixes: 19c1dc15c859 ("mm/damon/vaddr: use damos->migrate_dests in migrate_{hot,cold}")
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, enabling KASAN masks bugs where a lockless lookup path gets a
pointer to a SLAB_TYPESAFE_BY_RCU object that might concurrently be
recycled and is insufficiently careful about handling recycled objects:
KASAN puts freed objects in SLAB_TYPESAFE_BY_RCU slabs onto its quarantine
queues, even when it can't actually detect UAF in these objects, and the
quarantine prevents fast recycling.
When I introduced CONFIG_SLUB_RCU_DEBUG, my intention was that enabling
CONFIG_SLUB_RCU_DEBUG should cause KASAN to mark such objects as freed
after an RCU grace period and put them on the quarantine, while disabling
CONFIG_SLUB_RCU_DEBUG should allow such objects to be reused immediately;
but that hasn't actually been working.
I discovered such a UAF bug involving SLAB_TYPESAFE_BY_RCU yesterday; I
could only trigger this bug in a KASAN build by disabling
CONFIG_SLUB_RCU_DEBUG and applying this patch.
Link: https://lkml.kernel.org/r/20250723-kasan-tsbrcu-noquarantine-v1-1-846c8645976c@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), we extend the 'huge=' option to allow any sized large folios for
tmpfs, which means tmpfs will allow getting a highest order hint based on
the size of write() and fallocate() paths, and then will try each
allowable large order.
However, when the i915 driver allocates shmem memory, it doesn't provide
hint information about the size of the large folio to be allocated,
resulting in the inability to allocate PMD-sized shmem, which in turn
affects GPU performance.
Patryk added:
: In my tests, the performance drop ranges from a few percent up to 13%
: in Unigine Superposition under heavy memory usage on the CPU Core Ultra
: 155H with the Xe 128 EU GPU. Other users have reported performance
: impact up to 30% on certain workloads. Please find more in the
: regressions reports:
: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14645
: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13845
:
: I believe the change should be backported to all active kernel branches
: after version 6.12.
To fix this issue, we can use the inode's size as a write size hint in
shmem_read_folio_gfp() to help allocate PMD-sized large folios.
Link: https://lkml.kernel.org/r/f7e64e99a3a87a8144cc6b2f1dddf7a89c12ce44.1753926601.git.baolin.wang@linux.alibaba.com
Fixes: acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
Suggested-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current swap-in code assumes that, when a swap entry in shmem mapping
is order 0, its cached folios (if present) must be order 0 too, which
turns out not always correct.
The problem is shmem_split_large_entry is called before verifying the
folio will eventually be swapped in, one possible race is:
CPU1 CPU2
shmem_swapin_folio
/* swap in of order > 0 swap entry S1 */
folio = swap_cache_get_folio
/* folio = NULL */
order = xa_get_order
/* order > 0 */
folio = shmem_swap_alloc_folio
/* mTHP alloc failure, folio = NULL */
<... Interrupted ...>
shmem_swapin_folio
/* S1 is swapped in */
shmem_writeout
/* S1 is swapped out, folio cached */
shmem_split_large_entry(..., S1)
/* S1 is split, but the folio covering it has order > 0 now */
Now any following swapin of S1 will hang: `xa_get_order` returns 0, and
folio lookup will return a folio with order > 0. The
`xa_get_order(&mapping->i_pages, index) != folio_order(folio)` will always
return false causing swap-in to return -EEXIST.
And this looks fragile. So fix this up by allowing seeing a larger folio
in swap cache, and check the whole shmem mapping range covered by the
swapin have the right swap value upon inserting the folio. And drop the
redundant tree walks before the insertion.
This will actually improve performance, as it avoids two redundant Xarray
tree walks in the hot path, and the only side effect is that in the
failure path, shmem may redundantly reallocate a few folios causing
temporary slight memory pressure.
And worth noting, it may seems the order and value check before inserting
might help reducing the lock contention, which is not true. The swap
cache layer ensures raced swapin will either see a swap cache folio or
failed to do a swapin (we have SWAP_HAS_CACHE bit even if swap cache is
bypassed), so holding the folio lock and checking the folio flag is
already good enough for avoiding the lock contention. The chance that a
folio passes the swap entry value check but the shmem mapping slot has
changed should be very low.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-2-ryncsn@gmail.com
Fixes: 809bc86517cc ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Allow css_rstat_updated() in NMI context to enable memory accounting
for allocations in NMI context.
- /proc/cgroups doesn't contain useful information for cgroup2 and was
updated to only show v1 controllers. This unfortunately broke
something in the wild. Add an option to bring back the old behavior
to ease transition.
- selftest updates and other cleanups.
* tag 'cgroup-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add compatibility option for content of /proc/cgroups
selftests/cgroup: fix cpu.max tests
cgroup: llist: avoid memory tears for llist_node
selftests: cgroup: Fix missing newline in test_zswap_writeback_one
selftests: cgroup: Allow longer timeout for kmem_dead_cgroups cleanup
memcg: cgroup: call css_rstat_updated irrespective of in_nmi()
cgroup: remove per-cpu per-subsystem locks
cgroup: make css_rstat_updated nmi safe
cgroup: support to enable nmi-safe css_rstat_updated
selftests: cgroup: Fix compilation on pre-cgroupns kernels
selftests: cgroup: Optionally set up v1 environment
selftests: cgroup: Add support for named v1 hierarchies in test_core
selftests: cgroup_util: Add helpers for testing named v1 hierarchies
Documentation: cgroup: add section explaining controller availability
cgroup: Drop sock_cgroup_classid() dummy implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle for docs, especially the build
system:
- The Perl kernel-doc script was added to 2.3.52pre1 just after the
turn of the millennium. Over the following 25 years, it accumulated
a vast amount of cruft, all in a language few people want to deal
with anymore. Mauro's Python replacement in 6.16 faithfully
reproduced all of the cruft in the hope of avoiding regressions.
Now that we have a more reasonable code base, though, we can work
on cleaning it up; many of the changes this time around are toward
that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository
links.
...and lots of fixes and updates"
* tag 'docs-6.17' of git://git.lwn.net/linux: (147 commits)
scripts: add origin commit identification based on specific patterns
sphinx: kernel_abi: fix performance regression with O=<dir>
Documentation: core-api: entry: Replace deprecated KVM entry/exit functions
docs: fault-injection: drop reference to md-faulty
docs: document linked lists
scripts: kdoc: make it backward-compatible with Python 3.7
docs: kernel-doc: emit warnings for ancient versions of Python
Documentation/rtla: Describe exit status
Documentation/rtla: Add include common_appendix.rst
docs: kernel: Clarify printk_ratelimit_burst reset behavior
Documentation: ioctl-number: Don't repeat macro names
Documentation: ioctl-number: Shorten macros table
Documentation: ioctl-number: Correct full path to papr-physical-attestation.h
Documentation: ioctl-number: Extend "Include File" column width
Documentation: ioctl-number: Fix linuxppc-dev mailto link
overlayfs.rst: fix typos
docs: kdoc: emit a warning for ancient versions of Python
docs: kdoc: clean up check_sections()
docs: kdoc: directly access the always-there KdocItem fields
docs: kdoc: straighten up dump_declaration()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Convert struct slab to its own flags instead of referencing page
flags, which is another preparation step before separating it from
struct page completely.
Along with that, a bunch of documentation fixes and cleanups (Matthew
Wilcox)
- Convert large kmalloc to use frozen pages in order to be consistent
with non-large kmalloc slabs (Vlastimil Babka)
- MAINTAINERS updates (Matthew Wilcox, Lorenzo Stoakes)
- Restore NUMA policy support for large kmalloc, broken by mistake in
v6.1 (Vlastimil Babka)
* tag 'slab-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
MAINTAINERS: add missing files to slab section
slab: Update MAINTAINERS entry
memcg_slabinfo: Fix use of PG_slab
kfence: Remove mention of PG_slab
vmcoreinfo: Remove documentation of PG_slab and PG_hugetlb
doc: Add slab internal kernel-doc
slub: Fix a documentation build error for krealloc()
slab: Add SL_pfmemalloc flag
slab: Add SL_partial flag
slab: Rename slab->__page_flags to slab->flags
doc: Move SLUB documentation to the admin guide
mm, slab: use frozen pages for large kmalloc
mm, slab: restore NUMA policy support for large kmalloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update APEI (new EINJv2 error injection, assorted fixes), fix
the ACPI processor driver, update the legacy ACPI /proc interface
(multiple assorted fixes of minor issues) and several assorted ACPI
drivers (minor fixes and cleanups):
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface
(Andy Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver
to avoid using memory that contains leftover data (Sebastian Ott)
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li)
- Fix message formatting in the ACPI processor throttling driver and
in the ACPI PCI link driver (Colin Ian King)
- Clean up general ACPI PM domain handling (Rafael Wysocki)
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver
(Dan Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records and other ACPI-related information in
MAINTAINERS as well as the contact information in the ACPI ABI
documentation (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to
the ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
- Fix typos in ACPI documentation and comments (Bjorn Helgaas)"
* tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
ACPI: Fix typos
ACPI/PCI: Remove space before newline
ACPI: processor: throttling: Remove space before newline
ACPI: processor: perflib: Fix initial _PPC limit application
ACPI/PNP: Use my kernel.org address in MAINTAINERS and ABI docs
ACPI: TAD: Replace sprintf() with sysfs_emit()
ACPI: APEI: handle synchronous exceptions in task work
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
ACPI: APEI: MAINTAINERS: Update reviewers for APEI
Documentation: ACPI: Fix parent device references
ACPI: fan: Update debug message in fan_get_state_acpi4()
ACPI: PRM: Reduce unnecessary printing to avoid user confusion
ACPI: fan: Replace sprintf() with sysfs_emit()
ACPI: APEI: EINJ: Fix trigger actions
ACPI: processor: fix acpi_object initialization
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
ACPI: LPSS: Remove AudioDSP related ID
Documentation: firmware-guide: gpio-properties: Spelling and style fixes
ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions
ACPI: PM: Set .detach in acpi_general_pm_domain definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b83 ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c2707 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc VFS updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add ext4 IOCB_DONTCACHE support
This refactors the address_space_operations write_begin() and
write_end() callbacks to take const struct kiocb * as their first
argument, allowing IOCB flags such as IOCB_DONTCACHE to propagate
to the filesystem's buffered I/O path.
Ext4 is updated to implement handling of the IOCB_DONTCACHE flag
and advertises support via the FOP_DONTCACHE file operation flag.
Additionally, the i915 driver's shmem write paths are updated to
bypass the legacy write_begin/write_end interface in favor of
directly calling write_iter() with a constructed synchronous kiocb.
Another i915 change replaces a manual write loop with
kernel_write() during GEM shmem object creation.
Cleanups:
- don't duplicate vfs_open() in kernel_file_open()
- proc_fd_getattr(): don't bother with S_ISDIR() check
- fs/ecryptfs: replace snprintf with sysfs_emit in show function
- vfs: Remove unnecessary list_for_each_entry_safe() from
evict_inodes()
- filelock: add new locks_wake_up_waiter() helper
- fs: Remove three arguments from block_write_end()
- VFS: change old_dir and new_dir in struct renamedata to dentrys
- netfs: Remove unused declaration netfs_queue_write_request()
Fixes:
- eventpoll: Fix semi-unbounded recursion
- eventpoll: fix sphinx documentation build warning
- fs/read_write: Fix spelling typo
- fs: annotate data race between poll_schedule_timeout() and
pollwake()
- fs/pipe: set FMODE_NOWAIT in create_pipe_files()
- docs/vfs: update references to i_mutex to i_rwsem
- fs/buffer: remove comment about hard sectorsize
- fs/buffer: remove the min and max limit checks in __getblk_slow()
- fs/libfs: don't assume blocksize <= PAGE_SIZE in
generic_check_addressable
- fs_context: fix parameter name in infofc() macro
- fs: Prevent file descriptor table allocations exceeding INT_MAX"
* tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
netfs: Remove unused declaration netfs_queue_write_request()
eventpoll: fix sphinx documentation build warning
ext4: support uncached buffered I/O
mm/pagemap: add write_begin_get_folio() helper function
fs: change write_begin/write_end interface to take struct kiocb *
drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter
drm/i915: Use kernel_write() in shmem object create
eventpoll: Fix semi-unbounded recursion
vfs: Remove unnecessary list_for_each_entry_safe() from evict_inodes()
fs/libfs: don't assume blocksize <= PAGE_SIZE in generic_check_addressable
fs/buffer: remove the min and max limit checks in __getblk_slow()
fs: Prevent file descriptor table allocations exceeding INT_MAX
fs: Remove three arguments from block_write_end()
fs/ecryptfs: replace snprintf with sysfs_emit in show function
fs: annotate suspected data race between poll_schedule_timeout() and pollwake()
docs/vfs: update references to i_mutex to i_rwsem
fs/buffer: remove comment about hard sectorsize
fs_context: fix parameter name in infofc() macro
VFS: change old_dir and new_dir in struct renamedata to dentrys
proc_fd_getattr(): don't bother with S_ISDIR() check
...
|
|
Pull misc VFS updates from Al Viro:
"VFS-related cleanups in various places (mostly of the "that really
can't happen" or "there's a better way to do it" variety)"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gpib: use file_inode()
binder_ioctl_write_read(): simplify control flow a bit
secretmem: move setting O_LARGEFILE and bumping users' count to the place where we create the file
apparmor: file never has NULL f_path.mnt
landlock: opened file never has a negative dentry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry d_flags updates from Al Viro:
"The current exclusion rules for dentry->d_flags stores are rather
unpleasant. The basic rules are simple:
- stores to dentry->d_flags are OK under dentry->d_lock
- stores to dentry->d_flags are OK in the dentry constructor, before
becomes potentially visible to other threads
Unfortunately, there's a couple of exceptions to that, and that's
where the headache comes from.
The main PITA comes from d_set_d_op(); that primitive sets ->d_op of
dentry and adjusts the flags that correspond to presence of individual
methods. It's very easy to misuse; existing uses _are_ safe, but proof
of correctness is brittle.
Use in __d_alloc() is safe (we are within a constructor), but we might
as well precalculate the initial value of 'd_flags' when we set the
default ->d_op for given superblock and set 'd_flags' directly instead
of messing with that helper.
The reasons why other uses are safe are bloody convoluted; I'm not
going to reproduce it here. See [1] for gory details, if you care. The
critical part is using d_set_d_op() only just prior to
d_splice_alias(), which makes a combination of d_splice_alias() with
setting ->d_op, etc a natural replacement primitive.
Better yet, if we go that way, it's easy to take setting ->d_op and
modifying 'd_flags' under ->d_lock, which eliminates the headache as
far as 'd_flags' exclusion rules are concerned. Other exceptions are
minor and easy to deal with.
What this series does:
- d_set_d_op() is no longer available; instead a new primitive
(d_splice_alias_ops()) is provided, equivalent to combination of
d_set_d_op() and d_splice_alias().
- new field of struct super_block - 's_d_flags'. This sets the
default value of 'd_flags' to be used when allocating dentries on
this filesystem.
- new primitive for setting 's_d_op': set_default_d_op(). This
replaces stores to 's_d_op' at mount time.
All in-tree filesystems converted; out-of-tree ones will get caught
by the compiler ('s_d_op' is renamed, so stores to it will be
caught). 's_d_flags' is set by the same primitive to match the
's_d_op'.
- a lot of filesystems had sb->s_d_op->d_delete equal to
always_delete_dentry; that is equivalent to setting
DCACHE_DONTCACHE in 'd_flags', so such filesystems can bloody well
set that bit in 's_d_flags' and drop 'd_delete()' from
dentry_operations.
In quite a few cases that results in empty dentry_operations, which
means that we can get rid of those.
- kill simple_dentry_operations - not needed anymore
- massage d_alloc_parallel() to get rid of the other exception wrt
'd_flags' stores - we can set DCACHE_PAR_LOOKUP as soon as we
allocate the new dentry; no need to delay that until we commit to
using the sucker.
As the result, 'd_flags' stores are all either under ->d_lock or done
before the dentry becomes visible in any shared data structures"
Link: https://lore.kernel.org/all/20250224010624.GT1977892@ZenIV/ [1]
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
configfs: use DCACHE_DONTCACHE
debugfs: use DCACHE_DONTCACHE
efivarfs: use DCACHE_DONTCACHE instead of always_delete_dentry()
9p: don't bother with always_delete_dentry
ramfs, hugetlbfs, mqueue: set DCACHE_DONTCACHE
kill simple_dentry_operations
devpts, sunrpc, hostfs: don't bother with ->d_op
shmem: no dentry retention past the refcount reaching zero
d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier
make d_set_d_op() static
simple_lookup(): just set DCACHE_DONTCACHE
tracefs: Add d_delete to remove negative dentries
set_default_d_op(): calculate the matching value for ->d_flags
correct the set of flags forbidden at d_set_d_op() time
split d_flags calculation out of d_set_d_op()
new helper: set_default_d_op()
fuse: no need for special dentry_operations for root dentry
switch procfs from d_set_d_op() to d_splice_alias_ops()
new helper: d_splice_alias_ops()
procfs: kill ->proc_dops
...
|
|
The trace event has not recorded the right data since it was introduced at
commit c8b360031218 ("mm: add alloc_contig_migrate_range allocation
statistics"). Remove it.
Link: https://lkml.kernel.org/r/20250722194649.4135191-1-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507220742.P3SaKlI6-lkp@intel.com/
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Martin Liu <liumartin@google.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
|
|
damon_migrate_pages() tries migration even if the target node is invalid.
If users mistakenly make such invalid requests via
DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen.
[ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48
[ 7831.884160] #PF: supervisor read access in kernel mode
[ 7831.884681] #PF: error_code(0x0000) - not-present page
[ 7831.885203] PGD 0 P4D 0
[ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI
[ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary)
[ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014
[ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137)
[...]
[ 7831.895953] Call Trace:
[ 7831.896195] <TASK>
[ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192)
[ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851)
[ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.897735] migrate_pages (mm/migrate.c:2078)
[ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354)
[ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405)
[...]
Add a target node validity check in damon_migrate_pages(). The validity
check is stolen from that of do_pages_move(), which is being used for the
move_pages() system call.
Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org
Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use folio_pte_batch to batch process a large folio. Note that, PTE
batching here will save a few function calls, and this strategy in certain
cases (not this one) batches atomic operations in general, so we have a
performance win for all arches. This patch paves the way for patch 7
which will help us elide the TLBI per contig block on arm64.
The correctness of this patch lies on the correctness of setting the new
ptes based upon information only from the first pte of the batch (which
may also have accumulated a/d bits via modify_prot_start_ptes()).
Observe that the flag combination we pass to mprotect_folio_pte_batch()
guarantees that the batch is uniform w.r.t the soft-dirty bit and the
writable bit. Therefore, the only bits which may differ are the a/d bits.
So we only need to worry about code which is concerned about the a/d bits
of the PTEs.
Setting extra a/d bits on the new ptes where previously they were not set,
is fine - setting access bit when it was not set is not an incorrectness
problem but will only possibly delay the reclaim of the page mapped by the
pte (which is in fact intended because the kernel just operated on this
region via mprotect()!). Setting dirty bit when it was not set is again
not an incorrectness problem but will only possibly force an unnecessary
writeback.
So now we need to reason whether something can go wrong via
can_change_pte_writable(). The pte_protnone, pte_needs_soft_dirty_wp, and
userfaultfd_pte_wp cases are solved due to uniformity in the corresponding
bits guaranteed by the flag combination. The ptes all belong to the same
VMA (since callers guarantee that [start, end) will lie within the VMA)
therefore the conditional based on the VMA is also safe to batch around.
Since the dirty bit on the PTE really is just an indication that the folio
got written to - even if the PTE is not actually dirty but one of the PTEs
in the batch is, the wp-fault optimization can be made. Therefore, it is
safe to batch around pte_dirty() in can_change_shared_pte_writable() (in
fact this is better since without batching, it may happen that some ptes
aren't changed to writable just because they are not dirty, even though
the other ptes mapping the same large folio are dirty).
To batch around the PageAnonExclusive case, we must check the
corresponding condition for every single page. Therefore, from the large
folio batch, we process sub batches of ptes mapping pages with the same
PageAnonExclusive condition, and process that sub batch, then determine
and process the next sub batch, and so on. Note that this does not cause
any extra overhead; if suppose the size of the folio batch is 512, then
the sub batch processing in total will take 512 iterations, which is the
same as what we would have done before.
For pte_needs_flush():
ppc does not care about the a/d bits.
For x86, PAGE_SAVED_DIRTY is ignored. We will flush only when a/d bits
get cleared; since we can only have extra a/d bits due to batching, we
will only have an extra flush, not a case where we elide a flush due to
batching when we shouldn't have.
Link: https://lkml.kernel.org/r/20250718090244.21092-7-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for patch 6 and modularizing the code in general, split
can_change_pte_writable() into private and shared VMA parts. No
functional change intended.
Link: https://lkml.kernel.org/r/20250718090244.21092-6-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch 6 ("mm: Optimize mprotect() by PTE batching") optimizes mprotect()
by batch clearing the ptes, masking in the new protections, and batch
setting the ptes. Suppose that the first pte of the batch is writable -
with the current implementation of folio_pte_batch(), it is not guaranteed
that the other ptes in the batch are already writable too, so we may
incorrectly end up setting the writable bit on all ptes via
modify_prot_commit_ptes().
Therefore, introduce FPB_RESPECT_WRITE so that all ptes in the batch are
writable or not.
Link: https://lkml.kernel.org/r/20250718090244.21092-5-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Batch ptep_modify_prot_start/commit in preparation for optimizing
mprotect, implementing them as a simple loop over the corresponding single
pte helpers. Architecture may override these helpers.
Link: https://lkml.kernel.org/r/20250718090244.21092-4-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For the MM_CP_PROT_NUMA skipping case, observe that, if we skip an
iteration due to the underlying folio satisfying any of the skip
conditions, then for all subsequent ptes which map the same folio, the
iteration will be skipped for them too. Therefore, we can optimize by
using folio_pte_batch() to batch skip the iterations.
Use prot_numa_skip() introduced in the previous patch to determine whether
we need to skip the iteration. Change its signature to have a double
pointer to a folio, which will be used by mprotect_folio_pte_batch() to
determine the number of iterations we can safely skip.
Link: https://lkml.kernel.org/r/20250718090244.21092-3-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Optimize mprotect() for large folios", v5.
Use folio_pte_batch() to optimize change_pte_range(). On arm64, if the
ptes are painted with the contig bit, then ptep_get() will iterate through
all 16 entries to collect a/d bits. Hence this optimization will result
in a 16x reduction in the number of ptep_get() calls. Next,
ptep_modify_prot_start() will eventually call contpte_try_unfold() on
every contig block, thus flushing the TLB for the complete large folio
range. Instead, use get_and_clear_full_ptes() so as to elide TLBIs on
each contig block, and only do them on the starting and ending contig
block.
For split folios, there will be no pte batching; the batch size returned
by folio_pte_batch() will be 1. For pagetable split folios, the ptes will
still point to the same large folio; for arm64, this results in the
optimization described above, and for other arches, a minor improvement is
expected due to a reduction in the number of function calls.
mm-selftests pass on arm64. I have some failing tests on my x86 VM
already; no new tests fail as a result of this patchset.
We use the following test cases to measure performance, mprotect()'ing the
mapped memory to read-only then read-write 40 times:
Test case 1: Mapping 1G of memory, touching it to get PMD-THPs, then
pte-mapping those THPs
Test case 2: Mapping 1G of memory with 64K mTHPs
Test case 3: Mapping 1G of memory with 4K pages
Average execution time on arm64, Apple M3:
Before the patchset:
T1: 2.1 seconds T2: 2 seconds T3: 1 second
After the patchset:
T1: 0.65 seconds T2: 0.7 seconds T3: 1.1 seconds
Observing T1/T2 and T3 before the patchset, we also remove the regression
introduced by ptep_get() on a contpte block. And, for large folios we get
an almost 74% performance improvement, albeit the trade-off being a slight
degradation in the small folio case.
For x86:
Before the patchset:
T1: 3.75 seconds T2: 3.7 seconds T3: 3.85 seconds
After the patchset:
T1: 3.7 seconds T2: 3.7 seconds T3: 3.9 seconds
So there is a minor improvement due to reduction in number of function
calls, and a slight degradation in the small folio case due to the
overhead of vm_normal_folio() + folio_test_large().
Here is the test program:
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
unsigned long pmdsize = (1UL << 21);
unsigned long pagesize = (1UL << 12);
static void pte_map_thps(char *mem, size_t size)
{
size_t offs;
int ret = 0;
/* PTE-map each THP by temporarily splitting the VMAs. */
for (offs = 0; offs < size; offs += pmdsize) {
ret |= madvise(mem + offs, pagesize, MADV_DONTFORK);
ret |= madvise(mem + offs, pagesize, MADV_DOFORK);
}
if (ret) {
fprintf(stderr, "ERROR: mprotect() failed\n");
exit(1);
}
}
int main(int argc, char *argv[])
{
char *p;
int ret = 0;
p = mmap((1UL << 30), SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (p != (1UL << 30)) {
perror("mmap");
return 1;
}
memset(p, 0, SIZE);
if (madvise(p, SIZE, MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
pte_map_thps(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
This patch (of 7):
Reduce indentation by refactoring the prot_numa case into a new function.
No functional change intended.
Link: https://lkml.kernel.org/r/20250718090244.21092-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20250718090244.21092-2-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Smatch/coverity checkers report NULL mapping referencing issues[1][2][3]
every time the code is modified, because they do not understand that
mapping cannot be NULL when a folio is in page cache in the code.
Refactor the code to make it explicit.
Remove "end = -1" for anonymous folios, since after code refactoring, end
is no longer used by anonymous folio handling code.
No functional change is intended.
Link: https://lkml.kernel.org/r/20250718023000.4044406-7-ziy@nvidia.com
Link: https://lore.kernel.org/linux-mm/2afe3d59-aca5-40f7-82a3-a6d976fb0f4f@stanley.mountain/ [1]
Link: https://lore.kernel.org/oe-kbuild/64b54034-f311-4e7d-b935-c16775dbb642@suswa.mountain/ [2]
Link: https://lore.kernel.org/linux-mm/20250716145804.4836-1-antonio@mandelbit.com/ [3]
Link: https://lkml.kernel.org/r/20250718183720.4054515-7-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of open coding the refcount calculation, use
folio_expected_ref_count() to calculate frozen folio refcount. Because:
1. __folio_split() does not split a folio with PG_private, so no elevated
refcount from PG_private;
2. a frozen folio in __folio_split() is fully unmapped, so folio_mapcount()
in folio_expected_ref_count() is always 0;
3. (mapping || swap_cache) ? folio_nr_pages(folio) is taken care of by
folio_expected_ref_count() too.
Link: https://lkml.kernel.org/r/20250718023000.4044406-6-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250718183720.4054515-6-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Antonio Quartulli <antonio@mandelbit.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These VM_BUG* can be handled gracefully without crashing kernel.
Link: https://lkml.kernel.org/r/20250718023000.4044406-5-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250718183720.4054515-5-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Antonio Quartulli <antonio@mandelbit.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xas unlock, remap_page(), local_irq_enable() are moved out of if branches
to deduplicate the code. While at it, add remap_flags to clean up
remap_page() call site. nr_dropped is renamed to nr_shmem_dropped, as it
becomes a variable at __folio_split() scope.
Link: https://lkml.kernel.org/r/20250718183720.4054515-4-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Antonio Quartulli <antonio@mandelbit.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <k.shutemov@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
