| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 66f793099a63 ("x86/retpoline: Avoid retpolines for built-in __init
functions") disabled retpolines in __init sections (__noinitretpoline)
as a precaution against potential issues with retpolines in early boot,
but it has not been a problem in practice (i.e. see Clang below).
Commit 87358710c1fb ("x86/retpoline: Support retpoline builds with Clang")
narrowed this to only GCC, as Clang doesn't have per-function control
over retpoline emission. As such, Clang has been booting with retpolines
in __init since retpoline support was introduced.
Clang KCFI has been instrumenting __init since CFI was introduced.
With the introduction of KCFI for GCC, KCFI instrumentation with
retpolines disabled means that objtool does not construct .retpoline_sites
section entries for the non-retpoline KCFI calls. At boot, the KCFI
rehashing code, via __apply_fineibt(), misses all __init KCFI calls
(since they are not retpolines), resulting in immediate hash mismatches:
all preambles are rehashed (via .cfi_sites) and none of the __init call
sites are rehashed.
Remove __noinitretpoline since it provides no meaningful utility and
creates problems with CFI. Additionally remove __noretpoline since it
is now unused.
Alternatively, cfi_rand_callers() could walk the .kcfi_traps section which
is exactly the list of KCFI instrumentation sites. But it seems better to
have as few differences in common instruction sequences between compilers
as possible, so better to remove the special handling of retpolines in
__init for GCC.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250904034656.3670313-6-kees@kernel.org
|
|
Prepare for GCC KCFI support and move the __nocfi attribute from
compiler-clang.h to compiler_types.h. This was already gated by
CONFIG_CFI_CLANG, so this remains safe for non-KCFI GCC builds.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250904034656.3670313-1-kees@kernel.org
|
|
Absolute majority of callers are passing the 4th argument equal to
strlen() of the 3rd one.
Drop the v_size argument, add vfs_parse_fs_qstr() for the cases that
want independent length.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP (operating performance points) updates for 6.18 from Viresh
Kumar:
"- Add support to find OPP for a set of keys (Krishna Chaitanya Chundru).
- Minor optimization to OPP Rust implementation (Onur Özkan)."
* tag 'opp-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Add support to find OPP for a set of keys
rust: opp: use to_result for error handling
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Just some minor SDCA bug fixes and some minor structure reordering to
improve the padding.
|
|
cgroup_subsys::post_attach callback was introduced in commit 5cf1cacb49ae
("cgroup, cpuset: replace cpuset_post_attach_flush() with
cgroup_subsys->post_attach callback") and only cpuset would use this
callback to wait for the mm migration to complete at the end of
__cgroup_procs_write(). Since the previous patch defer the flush operation
until returning to userspace, no one use this callback now. Remove this
callback from cgroup_subsys.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
|
|
Add interface for applications to get information array. The application
provides a buffer pointer along with information type, maximum number of
entries and maximum size of each entry. The buffer may also contain match
conditions based on the information type. After the ioctl completes, the
actual number of entries and entry size are returned. (see [1], used by
driver runtime library)
[1] https://github.com/amd/xdna-driver/blob/main/src/shim/host/platform_host.cpp#L337
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250903053402.2103196-1-lizhi.hou@amd.com
|
|
When reporting an error, the AER driver prints the TLP Header / Prefix Log
only for errors enumerated in the AER_LOG_TLP_MASKS macro.
The macro was never amended since its introduction in 2006 with commit
6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver").
At the time, PCIe r1.1 was the latest spec revision.
Amend the macro with errors defined since then to avoid omitting the TLP
Header / Prefix Log for newer errors.
The order of the errors in AER_LOG_TLP_MASKS follows PCIe r1.1 sec 6.2.7
rather than 7.10.2, because only the former documents for which errors a
TLP Header / Prefix is logged. Retain this order. The section number is
still 6.2.7 in today's PCIe r7.0.
For Completion Timeouts, the TLP Header / Prefix is only logged if the
Completion Timeout Prefix / Header Log Capable bit is set in the AER
Capabilities and Control register. Introduce a tlp_header_logged() helper
to check whether the TLP Header / Prefix Log is populated and use it in
the two places which currently match against AER_LOG_TLP_MASKS directly.
For Uncorrectable Internal Errors, logging of the TLP Header / Prefix is
optional per PCIe r7.0 sec 6.2.7. If needed, drivers could indicate
through a flag whether devices are capable and tlp_header_logged() could
then check that flag.
pcitools introduced macros for newer errors with commit 144b0911cc0b
("ls-ecaps: extend decode support for more fields for AER CE and UE
status"):
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/commit/?id=144b0911cc0b
Unfortunately some of those macros are overly long:
PCI_ERR_UNC_POISONED_TLP_EGRESS
PCI_ERR_UNC_DMWR_REQ_EGRESS_BLOCKED
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE_TLP
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_TLP_XLAT_EGRESS_BLOCKED
This seems unsuitable for <linux/pci_regs.h>, so shorten to:
PCI_ERR_UNC_POISON_BLK
PCI_ERR_UNC_DMWR_BLK
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_XLAT_BLK
Note that some of the existing macros in <linux/pci_regs.h> do not match
exactly with pcitools (e.g. PCI_ERR_UNC_SDES versus PCI_ERR_UNC_SURPDN),
so it does not seem mandatory for them to be identical.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/5f707caf1260bd8f15012bb032f7da9a9b898aba.1756712066.git.lukas@wunner.de
|
|
Add the missing LHS_ACEL clock ID for the HSI0 block. This clock is
required for proper USB operation, as without it, USB connections fail
with errors like device descriptor read timeouts and address response
issues.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250831-usb-v2-1-00b9c0559733@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
clk-for-6.18
Merge the MSM8937 global clock controller binding through a topic branch
to allow merging the constants into the DeviceTree branch as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
MSM8937 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20250903-msm8937-v9-1-a097c91c5801@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove some padding holes in the sdca_entity_hide struct by reordering
the members.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-ID: <20250820163717.1095846-4-ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add devicetree binding document and related header file for
Amlogic S6 S7 S7D secure power domains.
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250822-pm-s6-s7-s7d-v1-1-82e3f3aff327@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add clock definitions for Ethernet (ETCLK A-E) to both R9A09G077 and
R9A09G087 SoCs. These definitions are required for describing Ethernet
devices in DT.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250904071954.3176806-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All users of the generic vDSO library also use the generic vDSO datastore.
Remove the now unnecessary Kconfig symbol.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-9-d9b65750e49f@linutronix.de
|
|
The ENABLE_COMAPT_VDSO symbol is only used by arm64 and only for the
time-related functionality. There should be no new users, so it doesn't
need to be in the generic vDSO code.
Move the logic into arm64 architecture-specific code and replace the
explicit define by the standard '#ifdef __aarch64__'.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-3-d9b65750e49f@linutronix.de
|
|
Assure user-space only modifies attributes for NL80211_CMD_SET_BSS
that are supported by the driver. This stricter checking is only done
when user-space commits to it by including NL80211_ATTR_BSS_PARAM.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-4-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The so-called fullmac devices rely on firmware functionality and/or API to
change BSS parameters. Today there are limited drivers supporting the
nl80211 primitive, but they only handle a subset of the bss parameters
passed if any. The mac80211 driver does handle all parameters and stores
their configured values. Some of the BSS parameters were already conditional
by wiphy->features. For these the wiphy->bss_param_support and wiphy->features
fields are silently aligned in wiphy_register(). Maybe better to issue a warning
instead when they are misaligned.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add new attributes to support EHT MCS/NSS Tx rates and EHT GI/LTF.
Parse EHT fixed MCS/NSS Tx rates and EHT GI/LTF values passed by the
userspace, validate and add as part of cfg80211_bitrate_mask.
MCS mask is constructed by new function, eht_build_mcs_mask(). Max NSS
supported for MCS rates of 7, 9, 11 and 13 is utilized to set MCS
bitmask for each NSS. MCS rates 14, and 15 if supported, are set only
for NSS = 0.
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250815213011.2704803-1-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a valid radio index is not found, the function returns -ENOENT. If the
channel argument itself is invalid, it returns -EINVAL. However, since the
caller only checks for < 0, the distinction between these error codes is
not utilized much. Also, handling these two distinct error codes throughout
the codebase adds complexity, as both cases must be addressed separately. A
subsequent change aims to simplify this by using a single error code for
all invalid cases, making error handling more consistent and streamlined.
To support this change, update the return value to -EINVAL when a valid
radio index is not found. This is still appropriate because, even if the
channel argument is structurally valid, the absence of a corresponding
radio index implies that the argument is effectively invalid—otherwise, a
valid index would have been found.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-1-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An S1G TIM PVB has 3 mandatory encoding modes, that being
block bitmap, single AID and OBL alongside the ability for
each encoding mode to be inverted. Introduce the ability to
parse the 3 encoding formats. The implementation specification
for the encoding formats can be found in IEEE80211-2024 9.4.2.5.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An S1G TIM PVB is encoded differently compared to a non-s1g TIM PVB.
As the AP dictates which encoding mode it uses, here we only implement
block bitmap encoding. This is the default encoding mode used by
all current vendor implementations.
Additionally, S1G has a maximum AID count of 8192, however we are
limiting the current implementation to 1600. This has no resemblence
to the standard and is purely an implementation detail. The reason for
this is due to the TIM elements maximum length of 255. This allows for,
at most, 25 encoded blocks for a PVB encoded with block bitmap. Support
for the maximum of 8192 AIDs will require an implementation of page slicing
to be added to mac80211.
As a result, we perform extra validation on both the STA and AP side
when receiving an AID as an S1G interface.
Add support for block bitmap encoding for an S1G AP and limit the
maximum AID count to 1600 for the current mac80211 implementations.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move some fields closer to where they are used, add missing tabs
and remove an extra newline.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
mlx5 pokes into the rxq state to check if the queue has a memory
provider, and therefore whether it may produce unreadable mem.
Add a helper for doing this in the page pool API. fbnic will want
a similar thing (tho, for a slightly different reason).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250901211214.1027927-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a289504a ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Some architectures, such as RISC-V, use the ELF e_flags field to encode
ABI-specific information (e.g., ISA extensions, fpu support). Debuggers
like GDB rely on these flags in core dumps to correctly interpret
optional register sets. If the flags are missing or incorrect, GDB may
warn and ignore valid data, for example:
warning: Unexpected size of section '.reg2/213' in core file.
This can prevent access to fpu or other architecture-specific registers
even when they were dumped.
Save the e_flags field during ELF binary loading (in load_elf_binary())
into the mm_struct, and later retrieve it during core dump generation
(in fill_note_info()). Kconfig option CONFIG_ARCH_HAS_ELF_CORE_EFLAGS
is introduced for architectures that require this behaviour.
Signed-off-by: Svetlana Parfenova <svetlana.parfenova@syntacore.com>
Link: https://lore.kernel.org/r/20250901135350.619485-1-svetlana.parfenova@syntacore.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
An exchange with a NFC target must complete within NCI_DATA_TIMEOUT.
A delay of 700 ms is not sufficient for cryptographic operations on smart
cards. CardOS 6.0 may need up to 1.3 seconds to perform 256-bit ECDH
or 3072-bit RSA. To prevent brute-force attacks, passports and similar
documents introduce even longer delays into access control protocols
(BAC/PACE).
The timeout should be higher, but not too much. The expiration allows
us to detect that a NFC target has disappeared.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250902113630.62393-1-juraj@sarinay.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
io_uring_cmd_iopoll_done()'s only caller was removed in commit
9ce6c9875f3e ("nvme: always punt polled uring_cmd end_io work to
task_work"). So remove the unused function too.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902013328.1517686-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring_cmd_done() takes the result code for the CQE as a ssize_t ret
argument. However, the CQE res field is a s32 value, as is the argument
to io_req_set_res(). To clarify that only s32 values can be faithfully
represented without truncation, change io_uring_cmd_done()'s ret
argument type to s32.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902012609.1513123-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add device tree bindings for global clock controller on Glymur SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-6-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Glymur SoC TCSR block provides CLKREF clocks for EDP, PCIe and USB.
Add this to the TCSR clock controller binding together with identifiers
for the clocks.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-2-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Followup of commit c51da3f7a161 ("net: remove sock_i_uid()")
A recent syzbot report was the trigger for this change.
Over the years, we had many problems caused by the
read_lock[_bh](&sk->sk_callback_lock) in sock_i_uid().
We could fix smc_diag_dump_proto() or make a more radical move:
Instead of waiting for new syzbot reports, cache the socket
inode number in sk->sk_ino, so that we no longer
need to acquire sk->sk_callback_lock in sock_i_ino().
This makes socket dumps faster (one less cache line miss,
and two atomic ops avoided).
Prior art:
commit 25a9c8a4431c ("netlink: Add __sock_i_ino() for __netlink_diag_dump().")
commit 4f9bf2a2f5aa ("tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.")
commit efc3dbc37412 ("rds: Make rds_sock_lock BH rather than IRQ safe.")
Fixes: d2d6422f8bd1 ("x86: Allow to enable PREEMPT_RT.")
Reported-by: syzbot+50603c05bbdf4dfdaffa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68b73804.050a0220.3db4df.01d8.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250902183603.740428-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) prefer vmalloc_array in ebtables, from Qianfeng Rong.
2) Use csum_replace4 instead of open-coding it, from Christophe Leroy.
3+4) Get rid of GFP_ATOMIC in transaction object allocations, those
cause silly failures with large sets under memory pressure, from
myself.
5) Remove test for AVX cpu feature in nftables pipapo set type,
testing for AVX2 feature is sufficient.
6) Unexport a few function in nf_reject infra: no external callers.
7) Extend payload offset to u16, this was restricted to values <=255
so far, from Fernando Fernandez Mancera.
* tag 'nf-next-25-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_payload: extend offset to 65535 bytes
netfilter: nf_reject: remove unneeded exports
netfilter: nft_set_pipapo: remove redundant test for avx feature bit
netfilter: nf_tables: all transaction allocations can now sleep
netfilter: nf_tables: allow iter callbacks to sleep
netfilter: nft_payload: Use csum_replace4() instead of opencoding
netfilter: ebtables: Use vmalloc_array() to improve code
====================
Link: https://patch.msgid.link/20250902133549.15945-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In this context "not that ..." should properly be "note that ...".
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the device tree bindings for the display clock controller which are
required on Qualcomm Glymur SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250829-glymur-disp-clock-controllers-v1-1-0ce6fabd837c@oss.qualcomm.com
[bjorn: Dropped unnecessary include in DT example]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a helper to check if RFS is needed or not. Allows to make the code a
bit cleaner and the next patch to have MPTCP use this helper to decide
whether or not to iterate over the subflows.
tun_flow_update() was calling sock_rps_record_flow_hash() regardless of
the state of rfs_needed. This was not really a bug as sock_flow_table
simply ends up being NULL and thus everything will be fine.
This commit here thus also implicitly makes tun_flow_update() respect
the state of rfs_needed.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250902-net-next-mptcp-misc-feat-6-18-v2-3-fa02bb3188b1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pci_has_p2pmem() is not used outside of p2pdma.c, and there is no need to
export it for use by modules.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/d40f3f1decf54c9236bc38b48a6aae612a5c182f.1756900291.git.leon@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5 PSP IFC bits
This PR has a single patch to add mlx5_ifc PSP related capabilities structures
and HW definitions needed for PSP support in mlx5.
Link: https://lore.kernel.org/20250828162953.2707727-1-daniel.zahka@gmail.com
* tag 'mlx5-psp-ifc' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add PSP capabilities structures and bits
====================
Link: https://patch.msgid.link/20250903063050.668442-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-6.18/block
Pull struct block_device getgeo changes from Al.
"switching ->getgeo() from struct block_device to struct gendisk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>"
* tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block: switch ->getgeo() to struct gendisk
scsi: switch ->bios_param() to passing gendisk
scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk
|
|
Declare the positional index for the RP1 MIPI clocks.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/c20066500908db854aa4816b40e956296bab526a.1750714412.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Certain OLED devices malfunction on specific brightness levels.
Specifically, when DP_SOURCE_BACKLIGHT_LEVEL is written to with
the first byte being 0x00 and sometimes 0x01, the panel forcibly
turns off until the device sleeps again.
Below are some examples. This was found by iterating over brighness
ranges while printing DP_SOURCE_BACKLIGHT_LEVEL. It was found that
the screen would malfunction on specific values, and some of them
were collected.
Therefore, introduce a quirk where the minor byte of brightness is
OR'd with 0x03 to avoid the range of invalid values.
This quirk was tested by removing the workarounds and iterating
from 0 to 50_000 value ranges with a cadence of 0.2s/it. The
range of the panel is 1000...400_000, so the values were slightly
interpolated during testing. The custom brightness curve added on
6.15 was disabled.
86016: 10101000000000000
86272: 10101000100000000
87808: 10101011100000000
251648: 111101011100000000
251649: 111101011100000001
86144: 10101000010000000
87809: 10101011100000001
251650: 111101011100000010
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3803
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-5-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Currently, the brightness quirk is limited to minimum brightness only.
Refactor it to a structure, so that more quirks can be added in the
future. Reserve 0 value for "no quirk", and use u16 to allow minimum
brightness up to 255.
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-3-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
With the introduction of the of_msi_xlate() function, the OF layer
provides an API to map a device ID and retrieve the MSI controller
node the ID is mapped to with a single call.
of_msi_map_id() is currently used to map a deviceID to a specific
MSI controller node; of_msi_xlate() can be used for that purpose
too, there is no need to keep the two functions.
Convert of_msi_map_id() to of_msi_xlate() calls and update the
of_msi_xlate() documentation to describe how the struct device_node
pointer passed in should be set-up to either provide the MSI controller
node target or receive its pointer upon mapping completion.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add a clock id for mipi dsi reference clock, mipi dsi node used it.
Signed-off-by: WeiHao Li <cn.liweihao@gmail.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250831104855.45883-4-cn.liweihao@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
b3c869d35b9b ("jiffies: Remove compile time assumptions about
CLOCK_TICK_RATE") removed the last definition of SHIFTED_HZ but left
behind comments about it. Remove the comments as well.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825203425.796034-1-helgaas@kernel.org
|
|
The call to __iter_div_u64_rem() in vdso_time_update_aux() is a wrapper
around subtraction. It cannot be used to divide large numbers, as that
introduces long, computationally expensive delays. A regular u64 division
is also not possible in the timekeeper update path as it can be too slow.
Instead of splitting the ktime_t offset into into second and subsecond
components during the timekeeper update fast-path, do it together with the
adjustment of tk->offs_aux in the slow-path. Equivalent to the handling of
offs_boot and monotonic_to_boot.
Reuse the storage of monotonic_to_boot for the new field, as it is not used
by auxiliary timekeepers.
Fixes: 380b84e168e5 ("vdso/vsyscall: Update auxiliary clock data in the datapage")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825-vdso-auxclock-division-v1-1-a1d32a16a313@linutronix.de
Closes: https://lore.kernel.org/lkml/aKwsNNWsHJg8IKzj@localhost/
|
|
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add related data structures for this new throttle functionality.
Tesed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://lore.kernel.org/r/20250829081120.806-2-ziqianlu@bytedance.com
|
|
Since all these functions are address-taken in SDTL_INIT() and called
indirectly, it doesn't really make sense for them to be inline.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
