| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The comment previously described the offset of mmap_lock as 0x120 (hex),
which is misleading. The correct offset is 56 bytes (decimal) from the
last cache line boundary. Using '0x120' could confuse readers trying to
understand why the count and owner fields reside in separate cachelines.
This change also removes an unnecessary space for improved formatting.
Link: https://lkml.kernel.org/r/20250806145906.24647-1-adrianhuang0701@gmail.com
Signed-off-by: Adrian Huang (Lenovo) <adrianhuang0701@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It was used for calculating the iteration number when the swap allocator
wants to scan the whole fragment list. Now the allocator only scans one
fragment cluster at a time, so no one uses this counter anymore.
Remove it as a cleanup; the performance change is marginal:
Build linux kernel using 10G ZRAM, make -j96, defconfig with 2G cgroup
memory limit, on top of tmpfs, 64kB mTHP enabled:
Before: sys time: 6278.45s
After: sys time: 6176.34s
Change to 8G ZRAM:
Before: sys time: 5572.85s
After: sys time: 5531.49s
Link: https://lkml.kernel.org/r/20250806161748.76651-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Limit the scope of vma_start_read() as it is used only as a helper for
higher-level locking functions implemented inside mmap_lock.c and we are
about to introduce more complex RCU rules for this function. The change
is pure code refactoring and has no functional changes.
Link: https://lkml.kernel.org/r/20250804233349.1278678-1-surenb@google.com
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace repeated (20 - PAGE_SHIFT) calculations with standard macros:
- MB_TO_PAGES(mb) converts MB to page count
- PAGES_TO_MB(pages) converts pages to MB
No functional change.
[akpm@linux-foundation.org: remove arc's private PAGES_TO_MB, remove its unused PAGES_TO_KB]
[akpm@linux-foundation.org: don't include mm.h due to include file ordering mess]
Link: https://lkml.kernel.org/r/20250718024134.1304745-1-ye.liu@linux.dev
Signed-off-by: Ye Liu <liuye@kylinos.cn>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lai jiangshan <jiangshanlai@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Goto-san reported confusing pgpromote statistics where the
pgpromote_success count significantly exceeded pgpromote_candidate.
On a system with three nodes (nodes 0-1: DRAM 4GB, node 2: NVDIMM 4GB):
# Enable demotion only
echo 1 > /sys/kernel/mm/numa/demotion_enabled
numactl -m 0-1 memhog -r200 3500M >/dev/null &
pid=$!
sleep 2
numactl memhog -r100 2500M >/dev/null &
sleep 10
kill -9 $pid # terminate the 1st memhog
# Enable promotion
echo 2 > /proc/sys/kernel/numa_balancing
After a few seconds, we observeed `pgpromote_candidate < pgpromote_success`
$ grep -e pgpromote /proc/vmstat
pgpromote_success 2579
pgpromote_candidate 0
In this scenario, after terminating the first memhog, the conditions for
pgdat_free_space_enough() are quickly met, and triggers promotion.
However, these migrated pages are only counted for in PGPROMOTE_SUCCESS,
not in PGPROMOTE_CANDIDATE.
To solve these confusing statistics, introduce PGPROMOTE_CANDIDATE_NRL to
count the missed promotion pages. And also, not counting these pages into
PGPROMOTE_CANDIDATE is to avoid changing the existing algorithm or
performance of the promotion rate limit.
Link: https://lkml.kernel.org/r/20250901090122.124262-1-ruansy.fnst@fujitsu.com
Link: https://lkml.kernel.org/r/20250729035101.1601407-1-ruansy.fnst@fujitsu.com
Fixes: c6833e10008f ("memory tiering: rate limit NUMA migration throughput")
Co-developed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Ruan Shiyang <ruansy.fnst@fujitsu.com>
Reported-by: Yasunori Gotou (Fujitsu) <y-goto@fujitsu.com>
Suggested-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The zone_reclaim_mode API controls the reclaim behavior when a node runs
out of memory. Contrary to its user-facing name, it is internally
referred to as "node_reclaim_mode".
This can be confusing. But because we cannot change the name of the API
since it has been in place since at least 2.6, let's try to be more
explicit about what the behavior of this API is.
Change the description to clarify what zone reclaim entails, and be
explicit about the RECLAIM_ZONE bit, whose purpose has led to some
confusion in the past already [1] [2].
While at it, also soften the warning about changing these bits.
[joshua.hahnjy@gmail.com: remove the reference to the vm.zone_reclaim_mode sysctl as an ABI]
Link: https://lkml.kernel.org/r/20250806134404.2000234-1-joshua.hahnjy@gmail.com
Link: https://lkml.kernel.org/r/20250805205048.1518453-1-joshua.hahnjy@gmail.com
Link: https://lore.kernel.org/linux-mm/1579005573-58923-1-git-send-email-alex.shi@linux.alibaba.com/ [1]
Link: https://lore.kernel.org/linux-mm/20200626003459.D8E015CA@viggo.jf.intel.com/ [2]
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/sysfs: fix refresh_ms control overwriting on
multi-kdamonds usages".
Automatic esssential DAMON/DAMOS status update feature of DAMON sysfs
interface (refresh_ms) is broken [1] for multiple DAMON contexts
(kdamonds) use case, since it uses a global single damon_call_control
object for all created DAMON contexts. The fields of the object,
particularly the list field is over-written for the contexts and it makes
unexpected results including user-space hangup and kernel crashes [2].
Fix it by extending damon_call_control for the use case and updating the
usage on DAMON sysfs interface to use per-context dynamically allocated
damon_call_control object.
This patch (of 2):
When damon_call_control->repeat is set, damon_call() is executed
asynchronously, and is eventually canceled when kdamond finishes. If the
damon_call_control object is dynamically allocated, finding the place to
deallocate the object is difficult. Introduce a new damon_call_control
field, namely dealloc_on_cancel, to ask the kdamond deallocates those
dynamically allocated objects when those are canceled.
Link: https://lkml.kernel.org/r/20250908201513.60802-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20250908201513.60802-2-sj@kernel.org
Fixes: d809a7c64ba8 ("mm/damon/sysfs: implement refresh_ms file internal work")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mm/swap.c and mm/mlock.c agree to drain any per-CPU batch as soon as a
large folio is added: so collect_longterm_unpinnable_folios() just wastes
effort when calling lru_add_drain[_all]() on a large folio.
But although there is good reason not to batch up PMD-sized folios, we
might well benefit from batching a small number of low-order mTHPs (though
unclear how that "small number" limitation will be implemented).
So ask if folio_may_be_lru_cached() rather than !folio_test_large(), to
insulate those particular checks from future change. Name preferred to
"folio_is_batchable" because large folios can well be put on a batch: it's
just the per-CPU LRU caches, drained much later, which need care.
Marked for stable, to counter the increase in lru_add_drain_all()s from
"mm/gup: check ref_count instead of lru before migration".
Link: https://lkml.kernel.org/r/57d2eaf8-3607-f318-e0c5-be02dce61ad0@google.com
Fixes: 9a4e9f3b2d73 ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region")
Signed-off-by: Hugh Dickins <hughd@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Keir Fraser <keirf@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: yangge <yangge1116@126.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
rseq_need_restart() reads and clears task::rseq_event_mask with preemption
disabled to guard against the scheduler.
But membarrier() uses an IPI and sets the PREEMPT bit in the event mask
from the IPI, which leaves that RMW operation unprotected.
Use guard(irq) if CONFIG_MEMBARRIER is enabled to fix that.
Fixes: 2a36ab717e8f ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
|
|
With the upcoming deletion of @peak-system.com accounts and following
the acquisition of PEAK-System and its brand by HMS-Networks, this fix
aims to migrate all address references to @hms-networks.com, as well
as to map my personal committer addresses to author addresses, while
taking the opportunity to correct the accent on the first ‘e’ of my
first name.
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250912081820.86314-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The ChromeOS XU provides a control to change the IQ profile for a camera.
It can be switched from VIVID (a.k.a. standard) to NONE (a.k.a. natural).
Wire it up to the standard v4l2 control.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move the MSXU_CONTROL_METADATA control definitino to the
include/linux/usb/uvc.h header, alongside the corresponding XU GUID. Add
a UVC_ prefix to avoid namespace clashes.
While at it, add the definition for the other controls for that
extension unit, as defined in
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5#222-extension-unit-controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Linux 6.17-rc3
|
|
Marvell's 88PM886 PMIC has a so-called General Purpose ADC used for
monitoring various system voltages and temperatures. Add the relevant
register definitions to the MFD header and a driver for the ADC.
Acked-by: Karel Balej <balejk@matfyz.cz> # for the PMIC
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new IIO modifiers to support power and energy measurement devices:
Power modifiers:
- IIO_MOD_ACTIVE: Real power consumed by the load
- IIO_MOD_REACTIVE: Power that oscillates between source and load
- IIO_MOD_APPARENT: Magnitude of complex power
Signal quality modifiers:
- IIO_MOD_RMS: Root Mean Square value
Additionally adds:
- IIO_CHAN_INFO_POWERFACTOR: Power factor channel info type for
representing the ratio of active power to apparent power
These modifiers enable proper representation of power measurement
devices like energy meters and power analyzers.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for IIO_ALTCURRENT channel type to distinguish AC current
measurements from DC current measurements. This follows the same pattern
as IIO_VOLTAGE and IIO_ALTVOLTAGE.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are four clock controllers in the A523 SoC. The existing binding
already covers two of them that are critical for basic operation. The
remaining ones are the MCU clock controller and CPU PLL clock
controller.
Add a description for the MCU CCU. This unit controls and provides
clocks to the MCU (RISC-V) subsystem and peripherals meant to operate
under low power conditions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250911174710.3149589-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250911174710.3149589-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH
error.
2) Support fetching the current bridge ethernet address.
This allows a more flexible approach to packet redirection
on bridges without need to use hardcoded addresses. From
Fernando Fernandez Mancera.
3) Zap a few no-longer needed conditionals from ipvs packet path
and convert to READ/WRITE_ONCE to avoid KCSAN warnings.
From Zhang Tengfei.
4) Remove a no-longer-used macro argument in ipset, from Zhen Ni.
* tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_reject: don't reply to icmp error messages
ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
netfilter: ipset: Remove unused htable_bits in macro ahash_region
selftest:net: fixed spelling mistakes
====================
Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the moment, the way that we currently free gem shmem objects is not
ideal for rust bindings. drm_gem_shmem_free() releases all of the
associated memory with a gem shmem object with kfree(), which means that
for us to correctly release a gem shmem object in rust we have to manually
drop all of the contents of our gem object structure in-place by hand
before finally calling drm_gem_shmem_free() to release the shmem resources
and the allocation for the gem object.
Since the only reason this is an issue is because of drm_gem_shmem_free()
calling kfree(), we can fix this by splitting drm_gem_shmem_free() out into
itself and drm_gem_shmem_release(), where drm_gem_shmem_release() releases
the various gem shmem resources without freeing the structure itself. With
this, we can safely re-acquire the KBox for the gem object's memory
allocation and let rust handle cleaning up all of the other struct members
automatically.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-3-lyude@redhat.com
|
|
With gem objects in rust, the most ideal way for us to be able to handle
gem shmem object creation is to be able to handle the memory allocation of
a gem object ourselves - and then have the DRM gem shmem helpers initialize
the object we've allocated afterwards. So, let's split out
drm_gem_shmem_init() from drm_gem_shmem_create() to allow for doing this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-2-lyude@redhat.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.17, round 2:
- Fix mach-imx Kconfig to select the correct PIT timer option
(Lukas Bulwahn)
- Correct thermal sensor index for i.MX8MP device tree (Peng Fan)
- Fix i.MX SCMI build error by adding stub API functions (Peng Fan)
* tag 'imx-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp: Correct thermal sensor index
ARM: imx: Kconfig: Adjust select after renamed config option
firmware: imx: Add stub functions for SCMI CPU API
firmware: imx: Add stub functions for SCMI LMM API
firmware: imx: Add stub functions for SCMI MISC API
Link: https://lore.kernel.org/r/aMQs2zr4fYl2DYVr@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Domain ID in the uAPI is misleading. Remove checks and log messages
related to 'domain' field in capability structure. Update UAPI to
mark the field as unused.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131302.303199-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a new device tree flag to cap the maximum High-Speed (HS)
mode frequency for SD cards, accommodating board-specific
electrical limitations which cannot support the default 50Mhz HS
frequency and others.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the pmdomain fixes for v6.17-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.18.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
usb-next
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
|
|
Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessing the USB device via the same USB host controller. To optimize
power usage, it's essential to monitor whether the USB device is
actively used by other co-processor. This information is vital when
determining if a USB device can be safely suspended during system power
state transitions.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
|
|
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras
on various new (Meteor Lake and later) Intel laptops.
This is an USB bridge driver which adds auxbus child devices for the GPIO,
I2C and SPI functions of the USBIO chip and which exports IO-functions for
the drivers for the auxbus child devices to communicate with the USBIO
device's firmware.
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renesas RZ/G3E USB3.0 Core Clock DT Binding Definitions
USB3.0 core clock DT binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
|
|
With all users of bgpio_init() converted to using the modernized generic
GPIO chip API, we can now move the gpio-mmio-specific fields out of
struct gpio_chip and into the dedicated struct gpio_generic_chip. To
that end: adjust the gpio-mmio driver to the new layout, update the
docs, etc.
The changes in gpio-mlxbf2.c and gpio-mpc8xxx.c are here and not in their
respective conversion commits because the former passes the address of
the generic chip's lock to the __releases() annotation and we cannot
really hide it while gpio-mpc8xxx.c accesses the shadow registers in a
driver-specific workaround and there's no reason to make them available
in a public API.
Also: drop the relevant task from TODO as it's now done.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250910-gpio-mmio-gpio-conv-part4-v2-15-f3d1a4c57124@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.18-2025-09-09:
amdgpu:
- Add CRIU support for gem objects
- SI UVD fix
- SI DPM fixes
- Misc code cleanups
- RAS updates
- GPUVM debugfs fixes
- Cyan Skillfish updates
- UserQ updates
- OEM i2c fix
- SMU 13.0.x updates
- DPCD probe quirk fix
- Make vbios build number available in sysfs
- HDCP updates
- Brightness curve fixes
- eDP updates
- Vblank fixes
- DCN 3.5 PG fix
- PBN calcution fix
amdkfd:
- Add CRIU support for gem objects
- Flexible array fix
- P2P topology fix
- APU memlimit fixes
- Misc code cleanups
UAPI:
- Add CRIU support for gem objects
Proposed userspace: https://github.com/checkpoint-restore/criu/pull/2613
radeon:
- Use dev_warn_once() in CS parsers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250909161928.942785-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.18:
UAPI Changes:
- Provide 'boot_display' attribute on boot-up devices
amdxdma:
- Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY
Cross-subsystem Changes:
bindings:
- Add Mayqueen vendor prefix mayqueen-
pci:
- vgaarb: Use screen_info helpers
Core Changes:
ttm:
- Add interface to populate buffers
Driver Changes:
amdgpu:
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
bochs:
- Clean up
bridge:
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
- Clean up
gma500:
- Clean up
nouveau:
- Pre-populate exported buffers
panel:
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
- Clean up
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
rcar-du:
- Use RUNTIME_PM_OPS
- Add support for DSI commands
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components
xe:
- Pre-populate exported buffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250911091737.GA39831@linux.fritz.box
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
We have a pending major version bump for the axi-spi-engine so to
prepare for that, improve the existing version checks for feature
enablement.
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-subsystem Changes:
- iopoll: Generalize read_poll_timeout() into poll_timeout_us() (Ville)
Non-display related:
- PREEMPT_RT fix (Sebastian)
- Replace DRM_DEBUG_SELFTEST with DRM_KUNIT_TEST (Ruben, Imre)
- Some changes oeveral like in RPS, SoC, debugfs targeting display separation (Jani)
Display related:
- General refactor in favor of intel_display (Suraj)
- Prune modes for YUV420 (Suraj)
- Reject HBR3 in any eDP Panel (Ankit)
- Change AUX DPCD probe address (Imre)
- Display Wa fix, additions, and updates (Ankit, Vinod, Nemesa, Suraj, Jouni))
- DP: Fix 2.7 Gbps link training on g4x (Ville)
- DP: Adjust the idle pattern handling (Ville)
- DP: Shuffle the link training code a bit (Ville)
- Don't set/read the DSI C clock divider on GLK (Ville)
- Precompute plane SURF address/etc (Ville)
- Enable_psr kernel parameter changes (Jouni)
- PHY LFPS sending configuration fixes (Jouni)
- Fix dma_fence_wait_timeout() return value handling (Aakash)
- DP: Fix disabling training pattern (Imre)
- Small code clean-ups (Gustavo, Colin, Jani, Juha-Pekka)
- Change vblank log from err to debug (Suraj)
- More display clean-up towards intel_display split (Jani)
- Use the recomended min_hblank values (Arun)
- Block hpd during suspend (Dibin)
- DSI: Fix overflow issue in pclk parsing (Jouni)
- PSR: Do not trigger Frame Change events from frontbuffer flush (Jouni)
- VBT cleanups and new fields (Jani, Suraj)
- Type-C enabled/disconnected dp-alt sink (Imre)
- Optimize panel power-on wait time (Dibin)
- Wildcat Lake enabling (Imre, Chaitanya)
- DP HDR updates (Chaitanya)
- Fix divide by 0 error in i9xx_set_backlight (Suraj)
- Fixes for PSR (Jouni)
- Remove the encoder check in hdcp enable (Suraj)
- Control HDMI output bpc (Lee)
- Fix possible overflow on tc power (Mika)
- Convert code towards poll_timeout_* (Jani)
- Use REG_BIT on FW_BLC_SELF_* macros (Luca)
- ALPM LFPS and silence period calculation (Jouni)
- Remove power state verification before HW readout (Imre)
- Fix HPD mtp_tc_hpd_enable_detection (Ville)
- DRAM detection (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aLtc-gk3jhwcWxZh@intel.com
|
|
Now that the destruction of info/keys is delayed until the socket
destructor, it's safe to use kfree() without an RCU callback.
The socket is in TCP_CLOSE state either because it never left it,
or it's already closed and the refcounter is zero. In any way,
no one can discover it anymore, it's safe to release memory
straight away.
Similar thing was possible for twsk already.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20250909-b4-tcp-ao-md5-rst-finwait2-v5-2-9ffaaaf8b236@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there are a couple of minor issues with destroying the keys
tcp_v4_destroy_sock():
1. The socket is yet in TCP bind buckets, making it reachable for
incoming segments [on another CPU core], potentially available to send
late FIN/ACK/RST replies.
2. There is at least one code path, where tcp_done() is called before
sending RST [kudos to Bob for investigation]. This is a case of
a server, that finished sending its data and just called close().
The socket is in TCP_FIN_WAIT2 and has RCV_SHUTDOWN (set by
__tcp_close())
tcp_v4_do_rcv()/tcp_v6_do_rcv()
tcp_rcv_state_process() /* LINUX_MIB_TCPABORTONDATA */
tcp_reset()
tcp_done_with_error()
tcp_done()
inet_csk_destroy_sock() /* Destroys AO/MD5 keys */
/* tcp_rcv_state_process() returns SKB_DROP_REASON_TCP_ABORT_ON_DATA */
tcp_v4_send_reset() /* Sends an unsigned RST segment */
tcpdump:
> 22:53:15.399377 00:00:b2:1f:00:00 > 00:00:01:01:00:00, ethertype IPv4 (0x0800), length 74: (tos 0x0, ttl 64, id 33929, offset 0, flags [DF], proto TCP (6), length 60)
> 1.0.0.1.34567 > 1.0.0.2.49848: Flags [F.], seq 2185658590, ack 3969644355, win 502, options [nop,nop,md5 valid], length 0
> 22:53:15.399396 00:00:01:01:00:00 > 00:00:b2:1f:00:00, ethertype IPv4 (0x0800), length 86: (tos 0x0, ttl 64, id 51951, offset 0, flags [DF], proto TCP (6), length 72)
> 1.0.0.2.49848 > 1.0.0.1.34567: Flags [.], seq 3969644375, ack 2185658591, win 128, options [nop,nop,md5 valid,nop,nop,sack 1 {2185658590:2185658591}], length 0
> 22:53:16.429588 00:00:b2:1f:00:00 > 00:00:01:01:00:00, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40)
> 1.0.0.1.34567 > 1.0.0.2.49848: Flags [R], seq 2185658590, win 0, length 0
> 22:53:16.664725 00:00:b2:1f:00:00 > 00:00:01:01:00:00, ethertype IPv4 (0x0800), length 74: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 60)
> 1.0.0.1.34567 > 1.0.0.2.49848: Flags [R], seq 2185658591, win 0, options [nop,nop,md5 valid], length 0
> 22:53:17.289832 00:00:b2:1f:00:00 > 00:00:01:01:00:00, ethertype IPv4 (0x0800), length 74: (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 60)
> 1.0.0.1.34567 > 1.0.0.2.49848: Flags [R], seq 2185658591, win 0, options [nop,nop,md5 valid], length 0
Note the signed RSTs later in the dump - those are sent by the server
when the fin-wait socket gets removed from hash buckets, by
the listener socket.
Instead of destroying AO/MD5 info and their keys in inet_csk_destroy_sock(),
slightly delay it until the actual socket .sk_destruct(). As shutdown'ed
socket can yet send non-data replies, they should be signed in order for
the peer to process them. Now it also matches how AO/MD5 gets destructed
for TIME-WAIT sockets (in tcp_twsk_destructor()).
This seems optimal for TCP-MD5, while for TCP-AO it seems to have an
open problem: once RST get sent and socket gets actually destructed,
there is no information on the initial sequence numbers. So, in case
this last RST gets lost in the network, the server's listener socket
won't be able to properly sign another RST. Nothing in RFC 1122
prescribes keeping any local state after non-graceful reset.
Luckily, BGP are known to use keep alive(s).
While the issue is quite minor/cosmetic, these days monitoring network
counters is a common practice and getting invalid signed segments from
a trusted BGP peer can get customers worried.
Investigated-by: Bob Gilligan <gilligan@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20250909-b4-tcp-ao-md5-rst-finwait2-v5-1-9ffaaaf8b236@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous patches introduced a new option, BR_BOOLOPT_FDB_LOCAL_VLAN_0.
When enabled, it has local FDB entries installed only on VLAN 0, instead of
duplicating them across all VLANs.
In this patch, add the corresponding UAPI toggle, and the code for turning
the feature on and off.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/ea99bfb10f687fa58091e6e1c2f8acc33f47ca45.1757004393.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove stubs for fixed_phy_set_link_update() and
fixed_phy_change_carrier() because all callers
(actually just one per function) select config
symbol FIXED_PHY.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/8729170d-cf39-48d9-aabc-c9aa4acda070@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new DMA mapping functions dma_map_phys() and dma_unmap_phys()
that operate directly on physical addresses instead of page+offset
parameters. This provides a more efficient interface for drivers that
already have physical addresses available.
The new functions are implemented as the primary mapping layer, with
the existing dma_map_page_attrs()/dma_map_resource() and
dma_unmap_page_attrs()/dma_unmap_resource() functions converted to simple
wrappers around the phys-based implementations.
In case dma_map_page_attrs(), the struct page is converted to physical
address with help of page_to_phys() function and dma_map_resource()
provides physical address as is together with addition of DMA_ATTR_MMIO
attribute.
The old page-based API is preserved in mapping.c to ensure that existing
code won't be affected by changing EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
variant for dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/54cc52af91777906bbe4a386113437ba0bcfba9c.1757423202.git.leonro@nvidia.com
|
|
Convert the KMSAN DMA handling function from page-based to physical
address-based interface.
The refactoring renames kmsan_handle_dma() parameters from accepting
(struct page *page, size_t offset, size_t size) to (phys_addr_t phys,
size_t size). The existing semantics where callers are expected to
provide only kmap memory is continued here.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3557cbaf66e935bc794f37d2b891ef75cbf2c80c.1757423202.git.leonro@nvidia.com
|
|
Convert the DMA direct mapping functions to accept physical addresses
directly instead of page+offset parameters. The functions were already
operating on physical addresses internally, so this change eliminates
the redundant page-to-physical conversion at the API boundary.
The functions dma_direct_map_page() and dma_direct_unmap_page() are
renamed to dma_direct_map_phys() and dma_direct_unmap_phys() respectively,
with their calling convention changed from (struct page *page,
unsigned long offset) to (phys_addr_t phys).
Architecture-specific functions arch_dma_map_page_direct() and
arch_dma_unmap_page_direct() are similarly renamed to
arch_dma_map_phys_direct() and arch_dma_unmap_phys_direct().
The is_pci_p2pdma_page() checks are replaced with DMA_ATTR_MMIO checks
to allow integration with dma_direct_map_resource and dma_direct_map_phys()
is extended to support MMIO path either.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bb15a22f76dc2e26683333ff54e789606cfbfcf0.1757423202.git.leonro@nvidia.com
|
|
Rename the IOMMU DMA mapping functions to better reflect their actual
calling convention. The functions iommu_dma_map_page() and
iommu_dma_unmap_page() are renamed to iommu_dma_map_phys() and
iommu_dma_unmap_phys() respectively, as they already operate on physical
addresses rather than page structures.
The calling convention changes from accepting (struct page *page,
unsigned long offset) to (phys_addr_t phys), which eliminates the need
for page-to-physical address conversion within the functions. This
renaming prepares for the broader DMA API conversion from page-based
to physical address-based mapping throughout the kernel.
All callers are updated to pass physical addresses directly, including
dma_map_page_attrs(), scatterlist mapping functions, and DMA page
allocation helpers. The change simplifies the code by removing the
page_to_phys() + offset calculation that was previously done inside
the IOMMU functions.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/ed172f95f8f57782beae04f782813366894e98df.1757423202.git.leonro@nvidia.com
|
|
As a preparation for following map_page -> map_phys API conversion,
let's rename trace_dma_*map_page() to be trace_dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/c0c02d7d8bd4a148072d283353ba227516a76682.1757423202.git.leonro@nvidia.com
|
|
Convert the DMA debug infrastructure from page-based to physical address-based
mapping as a preparation to rely on physical address for DMA mapping routines.
The refactoring renames debug_dma_map_page() to debug_dma_map_phys() and
changes its signature to accept a phys_addr_t parameter instead of struct page
and offset. Similarly, debug_dma_unmap_page() becomes debug_dma_unmap_phys().
A new dma_debug_phy type is introduced to distinguish physical address mappings
from other debug entry types. All callers throughout the codebase are updated
to pass physical addresses directly, eliminating the need for page-to-physical
conversion in the debug layer.
This refactoring eliminates the need to convert between page pointers and
physical addresses in the debug layer, making the code more efficient and
consistent with the DMA mapping API's physical address focus.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
[mszyprow: added a fixup]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/56d1a6769b68dfcbf8b26a75a7329aeb8e3c3b6a.1757423202.git.leonro@nvidia.com
Link: https://lore.kernel.org/all/20250910052618.GH341237@unreal/
|
|
This patch introduces the DMA_ATTR_MMIO attribute to mark DMA buffers
that reside in memory-mapped I/O (MMIO) regions, such as device BARs
exposed through the host bridge, which are accessible for peer-to-peer
(P2P) DMA.
This attribute is especially useful for exporting device memory to other
devices for DMA without CPU involvement, and avoids unnecessary or
potentially detrimental CPU cache maintenance calls.
DMA_ATTR_MMIO is supposed to provide dma_map_resource() functionality
without need to call to special function and perform branching when
processing generic containers like bio_vec by the callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/6f058ec395c5348014860dbc2eed348c17975843.1757423202.git.leonro@nvidia.com
|
|
Begin reporting arena page faults and the faulting address to BPF
program's stderr, this patch adds support in the arm64 and x86-64 JITs,
support for other archs can be added later.
The fault handlers receive the 32 bit address in the arena region so
the upper 32 bits of user_vm_start is added to it before printing the
address. This is what the user would expect to see as this is what is
printed by bpf_printk() is you pass it an address returned by
bpf_arena_alloc_pages();
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250911145808.58042-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF streams are only valid for the main programs, to make it easier to
access streams from subprogs, introduce main_prog_aux in struct
bpf_prog_aux.
prog->aux->main_prog_aux = prog->aux, for main programs and
prog->aux->main_prog_aux = main_prog->aux, for subprograms.
Make bpf_prog_find_from_stack() use the added main_prog_aux to return
the mainprog when a subprog is found on the stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
