| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
GPUs typically benefit from contiguous memory via reduced TLB pressure and
improved caching performance, where the maximum size of contiguous block
which adds a performance benefit is related to hardware design.
TTM pool allocator by default tries (hard) to allocate up to the system
MAX_PAGE_ORDER blocks. This varies by the CPU platform and can also be
configured via Kconfig.
If that limit was set to be higher than the GPU can make an extra use of,
lets allow the individual drivers to let TTM know over which allocation
order can the pool allocator afford to make a little bit less effort with.
We implement this by disabling direct reclaim for those allocations, which
reduces the allocation latency and lowers the demands on the page
allocator, in cases where expending this effort is not critical for the
GPU in question.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-5-tvrtko.ursulin@igalia.com
|
|
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_device_init() with flags with the additional
benefit of soon being able to pass in more data with just a one off
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> # For xe
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-4-tvrtko.ursulin@igalia.com
[tursulin: fixup checkpatch while applying]
|
|
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_pool_init() with flags with the additional
benefit of soon being able to pass in more data with just this one
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-3-tvrtko.ursulin@igalia.com
|
|
The ttm/ttm_resource.h header does not really need anything from
drm_print.h. A simple forward declaration for struct drm_printer is
sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cfdb1095033112c2a7e58767481c98929984a33c.1761734313.git.jani.nikula@intel.com
|
|
The drm_mm.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/7d570ed1f0f0f14cac346bea50bce9ef02ddd166.1761734313.git.jani.nikula@intel.com
|
|
The drm_buddy.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/b303996b407fcbe2c7357bea036f79c45d6dae49.1761734313.git.jani.nikula@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- atyfb: Avoid hard lock up when PLL not initialized (Daniel Palmer)
- pvr2fb: Fix build error when CONFIG_PVR2_DMA enabled (Florian Fuchs)
- bitblit: Fix out-of-bounds read in bit_putcs* (Junjie Cao)
- valkyriefb: Fix reference count leak (Miaoqian Lin)
- fbcon: Fix slab-use-after-free in fb_mode_is_equal (Quanmin Yan)
- fb.h: Fix typo in "vertical" (Piyush Choudhary)
* tag 'fbdev-for-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: atyfb: Check if pll_ops->init_pll failed
fbcon: Set fb_display[i]->mode to NULL when the mode is released
fbdev: bitblit: bound-check glyph index in bit_putcs*
fbdev: pvr2fb: Fix leftover reference to ONCHIP_NR_DMA_CHANNELS
fbdev: valkyriefb: Fix reference count leak in valkyriefb_init
video: fb: Fix typo in comment in fb.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
|
Drop the QPIC interconnect and BCM nodes for the SDX75 SoC. The reason
is that this QPIC BCM resource is already defined as a RPMh clock in
clk-rpmh driver as like other SDX SoCs. So it is wrong to describe the
same resource in two different providers.
Also, without this series, the NAND driver fails to probe on SDX75 as
the interconnect sync state disables the QPIC nodes as there were no
clients voting for this ICC resource. However, the NAND driver had already
voted for this BCM resource through the clk-rpmh driver. Since both votes
come from Linux, RPMh was unable to distinguish between these two and ends
up disabling the resource during sync state.
* icc-sdx75
interconnect: qcom: sdx75: Drop QPIC interconnect and BCM nodes
dt-bindings: interconnect: qcom: Drop QPIC_CORE IDs
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-0-20d6820e455c@oss.qualcomm.com>
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Convert nf_tables 'nft_set_iter' usage to use C99 struct
initialization, from Fernando Fernandez Mancera.
2) Disallow nf_conntrack_max=0. This was an (undocumented)
historic inheritance from ip_conntrack (ipv4 only nf_conntrack
predecessor). Doing so will simplify future changes to make
this pernet-tuneable.
3) Fix a typo in conntrack.h comment, from Weibiao Tu.
* tag 'nf-next-25-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: fix typo in nf_conntrack_l4proto.h comment
netfilter: conntrack: disable 0 value for conntrack_max setting
netfilter: nf_tables: use C99 struct initializer for nft_set_iter
====================
Link: https://patch.msgid.link/20251030121954.29175-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As like other SDX targets, SDX75 QPIC BCM resource is also modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect node mistakenly.
Hence, drop the QPIC interconnect IDs and let the clients use clk-rpmh
driver to vote for this resource.
Even though this change is an ABI break, it is necessary to avoid
describing the same resource provider in two different drivers, as it may
lead to votes from clients overriding each other.
Fixes: 956329ec7c5e ("dt-bindings: interconnect: Add compatibles for SDX75")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: kept the QUP defines value unchanged]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-2-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not that many changes this time:
- mac80211:
- improved VHT radiotap reporting
- S1G improvements
- multi-radio monitor improvements
- HT action frame handling on 6 GHz
- mesh rate tracking improvements
- CSA handling improvements
- cfg80211: multi-radio debugfs
- rt2x00: improvements for embedded platforms
* tag 'wireless-next-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
wifi: mac80211: Allow HT Action frame processing on 6 GHz when HE is supported
wifi: rt2x00: add nvmem eeprom support
wifi: mac80211: add RX flag to report radiotap VHT information
net: wireless: Remove redundant pm_runtime_mark_last_busy() calls
wifi: cfg80211: Add parameters to radio-specific debugfs directories
wifi: cfg80211: Add debugfs support for multi-radio wiphy
wifi: mac80211: fix missing RX bitrate update for mesh forwarding path
wifi: cfg80211: default S1G chandef width to 1MHz
wifi: mac80211: get probe response chan via ieee80211_get_channel_khz
wifi: mac80211: reset CRC valid after CSA
wifi: mac80211_hwsim: advertise puncturing feature support
wifi: cfg80211/mac80211: validate radio frequency range for monitor mode
wifi: rt2x00: check retval for of_get_mac_address
====================
Link: https://patch.msgid.link/20251030105355.13216-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename drm_client_framebuffer_flush() to drm_cient_buffer_flush() and
adapt its callers. The old name was left over from previous naming
conventions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-8-tzimmermann@suse.de
|
|
Rename drm_client_framebuffer_create() to drm_client_buffer_create_dump()
and adapt callers. The new name reflects the function's purpose. Using
dumb buffers is the easiest way for creating a GEM buffer in a drivers-
independent way.
There's also drm_client_buffer_create(), which creates the client buffer
from a preexisting buffer object. This helper can be exported for drivers
that create their own GEM buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-7-tzimmermann@suse.de
|
|
Release client buffers with drm_client_buffer_delete() instead of
drm_client_framebuffer_delete(). The latter is just a tiny wrapper
around the former.
Move the test for !buffer into drm_client_buffer_delete(), although
all callers appear to always have a valid pointer.
v2:
- test for !buffer before deref-ing pointer (Jocelyn, Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-6-tzimmermann@suse.de
|
|
The client buffer's framebuffer holds a reference and pointer on
each of its GEM buffer objects. Thus the field gem in the client-
buffer struct is not necessary. Deprecated the field and convert
the client-buffer helpers to use the framebuffer's objects.
In drm_client_buffer_delete(), do a possible vunmap before releasing
the framebuffer. Otherwise we'd eventually release the framebuffer
before unmaping its buffer objects.
v2:
- avoid dependency on CONFIG_DRM_KMS_HELPER
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-5-tzimmermann@suse.de
|
|
Only the client-buffer setup uses the pitch field from struct
drm_client_buffer. Remove the field and pass the value among setup
helpers.
Clients that need the pitch should rather look at the framebuffer's
pitches[0] directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-2-tzimmermann@suse.de
|
|
cgroup1 freezer piggybacks on the PM freezer, which inadvertently allowed
userspace to produce uninterruptible tasks at will. To avoid the issue,
cgroup2 freezer switched to a separate job control based mechanism. While
this happened a long time ago, the code and comment haven't been updated
making it confusing to people who aren't familiar with the history.
Rename cgroup_freezing() to cgroup1_freezing() and update comments on top of
freezing() and frozen() to clarify that cgroup2 freezer isn't covered by the
PM freezer mechanism.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Qu Wenruo <wqu@suse.com>
Link: https://patch.msgid.link/aPZ3q6Hm865NicBC@slm.duckdns.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
next_pseudo_random32 implements a LCG with known bad statistical
properties and was only used in two pieces of testing code.
With no remaining users now, remove it.
Signed-off-by: Markus Theil <theil.markus@gmail.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Introduce a new crtc property "SHARPNESS_STRENGTH" that allows
the user to set the intensity so as to get the sharpness effect.
The value of this property can be set from 0-255.
It is useful in scenario when the output is blurry and user
want to sharpen the pixels. User can increase/decrease the
sharpness level depending on the content displayed.
v2: Rename crtc property variable [Arun]
Add modeset detail in uapi doc[Uma]
v3: Fix build issue
v4: Modify the subject line[Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Adarsh G M <Adarsh.g.m@intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://invent.kde.org/plasma/kwin/-/merge_requests/7689
Link: https://patch.msgid.link/20251028120747.3027332-2-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Userspace needs access to the signal that caused the coredump before the
coredumping process has been reaped. Expose it as part of the coredump
information in struct pidfd_info. After the process has been reaped that
info is also available as part of PIDFD_INFO_EXIT's exit_code field.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-8-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some of the future fields in struct pidfd_info can be optional. If the
kernel has nothing to emit in that field, then it doesn't set the flag
in the reply. This presents a problem: There is currently no way to know
what mask flags the kernel supports since one can't always count on them
being in the reply.
Add a new PIDFD_INFO_SUPPORTED_MASK flag and field that the kernel can
set in the reply. Userspace can use this to determine if the fields it
requires from the kernel are supported. This also gives us a way to
deprecate fields in the future, if that should become necessary.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-5-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We grew struct pidfd_info not too long ago.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-3-ca449b7b7aa0@kernel.org
Fixes: 1d8db6fd698d ("pidfs, coredump: add PIDFD_INFO_COREDUMP")
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Think SMC_WR_BUF_CNT_SEND := SMC_WR_BUF_CNT used in send context and
SMC_WR_BUF_CNT_RECV := 3 * SMC_WR_BUF_CNT used in recv context. Those
get replaced with lgr->max_send_wr and lgr->max_recv_wr respective.
Please note that although with the default sysctl values
qp_attr.cap.max_send_wr == qp_attr.cap.max_recv_wr is maintained but
can not be assumed to be generally true any more. I see no downside to
that, but my confidence level is rather modest.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20251027224856.2970019-2-pasic@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Describe the "type" struct member using '@type' and move it together
with the rest of the doc for ctl_table_header to avoid a kernel-doc
warning:
Warning: include/linux/sysctl.h:178 Incorrect use of kernel-doc format:
* enum type - Enumeration to differentiate between ctl target types
Fixes: 2f2665c13af4 ("sysctl: replace child with an enumeration")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
In the comment for nf_conntrack_l4proto.h, the word "nfnetink" was
incorrectly spelled. It has been corrected to "nfnetlink".
Fixes a typo to enhance readability and ensure consistency.
Signed-off-by: caivive (Weibiao Tu) <cavivie@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The GSO segmentation functions for ESP tunnel mode
(xfrm4_tunnel_gso_segment and xfrm6_tunnel_gso_segment) were
determining the inner packet's L2 protocol type by checking the static
x->inner_mode.family field from the xfrm state.
This is unreliable. In tunnel mode, the state's actual inner family
could be defined by x->inner_mode.family or by
x->inner_mode_iaf.family. Checking only the former can lead to a
mismatch with the actual packet being processed, causing GSO to create
segments with the wrong L2 header type.
This patch fixes the bug by deriving the inner mode directly from the
packet's inner protocol stored in XFRM_MODE_SKB_CB(skb)->protocol.
Instead of replicating the code, this patch modifies the
xfrm_ip2inner_mode helper function. It now correctly returns
&x->inner_mode if the selector family (x->sel.family) is already
specified, thereby handling both specific and AF_UNSPEC cases
appropriately.
With this change, ESP GSO can use xfrm_ip2inner_mode to get the
correct inner mode. It doesn't affect existing callers, as the updated
logic now mirrors the checks they were already performing externally.
Fixes: 26dbd66eab80 ("esp: choose the correct inner protocol for GSO on inter address family tunnels")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Introduce a new ioctl `drm_ivpu_bo_create_from_userptr` that allows
users to create GEM buffer objects from user pointers to memory regions.
The user pointer must be page-aligned and the memory region must remain
valid for the buffer object's lifetime.
Userptr buffers enable direct use of mmapped files (e.g. inference
weights) in NPU workloads without copying data to NPU buffer objects.
This reduces memory usage and provides better flexibility for NPU
applications.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029091752.203198-1-karol.wachowski@linux.intel.com
|
|
mac80211 already reports some basic information in the radiotap header
with the known fields declared by the driver. However, drivers may want
to report more accurate information and in that case the full VHT
radiotap structure needs to be provided.
Add a new RX_FLAG_RADIOTAP_VHT which is set when the VHT information
should be pulled from the skb. Update the code to fill in the VHT fields
to only do so when requested by the driver or if the information has not
yet been set. This way the driver can fully control the information if
it chooses so.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251027142118.0bad1c307a21.I2cf285c20a822698039603f2af00ed9c548f2ee0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace blake2b_generic.c with a new file blake2b.c which implements the
BLAKE2b crypto_shash algorithms on top of the BLAKE2b library API.
Change the driver name suffix from "-generic" to "-lib" to reflect that
these algorithms now just use the (possibly arch-optimized) library.
This closely mirrors crypto/{md5,sha1,sha256,sha512}.c.
Remove include/crypto/internal/blake2b.h since it is no longer used.
Likewise, remove struct blake2b_state from include/crypto/blake2b.h.
Omit support for import_core and export_core, since there are no legacy
drivers that need these for these algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a library API for BLAKE2b, closely modeled after the BLAKE2s API.
This will allow in-kernel users such as btrfs to use BLAKE2b without
going through the generic crypto layer. In addition, as usual the
BLAKE2b crypto_shash algorithms will be reimplemented on top of this.
Note: to create lib/crypto/blake2b.c I made a copy of
lib/crypto/blake2s.c and made the updates from BLAKE2s => BLAKE2b. This
way, the BLAKE2s and BLAKE2b code is kept consistent. Therefore, it
borrows the SPDX-License-Identifier and Copyright from
lib/crypto/blake2s.c rather than crypto/blake2b_generic.c.
The library API uses 'struct blake2b_ctx', consistent with other
lib/crypto/ APIs. The existing 'struct blake2b_state' will be removed
once the blake2b crypto_shash algorithms are updated to stop using it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add le64_to_cpu_array() and cpu_to_le64_array(). These mirror the
corresponding 32-bit functions.
These will be used by the BLAKE2b code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add kerneldoc for the BLAKE2s library API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
A couple more small cleanups to the BLAKE2s code before these things get
propagated into the BLAKE2b code:
- Drop 'const' from some non-pointer function parameters. It was a bit
excessive and not conventional.
- Rename 'block' argument of blake2s_compress*() to 'data'. This is for
consistency with the SHA-* code, and also to avoid the implication
that it points to a singular "block".
No functional changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
ufshcd_link_startup() has a facility (link_startup_again) to issue
DME_LINKSTARTUP a 2nd time even though the 1st time was successful.
Some older hardware benefits from that, however the behaviour is
non-standard, and has been found to cause link startup to be unreliable
for some Intel Alder Lake based host controllers.
Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress
link_startup_again, in preparation for setting the quirk for affected
controllers.
Fixes: 7dc9fb47bc9a ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When building drivers/net/ethernet/intel/idpf/xsk.c for ARCH=arm with
CONFIG_CFI=y using a version of LLVM prior to 22.0.0, there is a
BUILD_BUG_ON failure:
$ cat arch/arm/configs/repro.config
CONFIG_BPF_SYSCALL=y
CONFIG_CFI=y
CONFIG_IDPF=y
CONFIG_XDP_SOCKETS=y
$ make -skj"$(nproc)" ARCH=arm LLVM=1 clean defconfig repro.config drivers/net/ethernet/intel/idpf/xsk.o
In file included from drivers/net/ethernet/intel/idpf/xsk.c:4:
include/net/libeth/xsk.h:205:2: error: call to '__compiletime_assert_728' declared with 'error' attribute: BUILD_BUG_ON failed: !__builtin_constant_p(tmo == libeth_xsktmo)
205 | BUILD_BUG_ON(!__builtin_constant_p(tmo == libeth_xsktmo));
| ^
...
libeth_xdp_tx_xmit_bulk() indirectly calls libeth_xsk_xmit_fill_buf()
but these functions are marked as __always_inline so that the compiler
can turn these indirect calls into direct ones and see that the tmo
parameter to __libeth_xsk_xmit_fill_buf_md() is ultimately libeth_xsktmo
from idpf_xsk_xmit().
Unfortunately, the generic kCFI pass in LLVM expands the kCFI bundles
from the indirect calls in libeth_xdp_tx_xmit_bulk() in such a way that
later optimizations cannot turn these calls into direct ones, making the
BUILD_BUG_ON fail because it cannot be proved at compile time that tmo
is libeth_xsktmo.
Disable the generic kCFI pass for libeth_xdp_tx_xmit_bulk() to ensure
these indirect calls can always be turned into direct calls to avoid
this error.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2124
Fixes: 9705d6552f58 ("idpf: implement Rx path for AF_XDP")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-3-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
There are two different ways that LLVM can expand kCFI operand bundles
in LLVM IR: generically in the middle end or using an architecture
specific sequence when lowering LLVM IR to machine code in the backend.
The generic pass allows any architecture to take advantage of kCFI but
the expansion of these bundles in the middle end can mess with
optimizations that may turn indirect calls into direct calls when the
call target is known at compile time, such as after inlining.
Add __nocfi_generic, dependent on an architecture selecting
CONFIG_ARCH_USES_CFI_GENERIC_LLVM_PASS, to disable kCFI bundle
generation in functions where only the generic kCFI pass may cause
problems.
Link: https://github.com/ClangBuiltLinux/linux/issues/2124
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-1-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Ajay Neeli <ajay.neeli@amd.com> says:
This patch series adds support for the UFS driver on the AMD Versal
Gen 2 SoC. It includes:
- Device tree bindings and driver implementation.
- Secure read support for the secure retrieval of UFS calibration
values.
The UFS host driver is based upon the Synopsis DesignWare (DWC) UFS
architecture, utilizing the existing UFSHCD_DWC and UFSHCD_PLATFORM
drivers.
Link: https://patch.msgid.link/20251021113003.13650-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for the UFS host controller on the AMD Versal Gen 2 SoC,
built on the Synopsys DWC UFS architecture, using the UFSHCD DWC and
UFSHCD platform driver. This controller requires specific configurations
like M-PHY/RMMI/UniPro and vendor specific registers programming before
doing the UIC_LINKSTARTUP.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-5-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
- Add APIs for UFS PHY initialization.
- Verify M-PHY TX-RX configuration readiness.
- Confirm SRAM initialization and Set SRAM bypass.
- Retrieve UFS calibration values.
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-4-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/cd112f15-401a-43d9-8525-9ff0965a68cd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update tls_offload_rx_resync_async_request_start() and
tls_offload_rx_resync_async_request_end() to get a struct
tls_offload_resync_async parameter directly, rather than
extracting it from struct sock.
This change aligns the function signatures with the upcoming
tls_offload_rx_resync_async_request_cancel() helper, which
will be introduced in a subsequent patch.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv6 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv6.icmp.errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of icmp6_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Since commit 20e1954fe238 ("ipv6: RFC 4884 partial support for SIT/GRE
tunnels") it is possible for icmp6_send() to be called with an skb that
already contains ICMP extensions. This can happen when we receive an
ICMPv4 message with extensions from a tunnel and translate it to an
ICMPv6 message towards an IPv6 host in the overlay network. I could not
find an RFC that supports this behavior, but it makes sense to not
overwrite the original extensions that were appended to the packet.
Therefore, avoid appending extensions if the length field in the
provided ICMPv6 header is already filled.
Export netdev_copy_name() using EXPORT_IPV6_MOD_GPL() to make it
available to IPv6 when it is built as a module.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch has no functional change, and prepares the following one.
tcp_rcvbuf_grow() will need to have access to tp->rcvq_space.space
old and new values.
Change mptcp_rcvbuf_grow() in a similar way.
Signed-off-by: Eric Dumazet <edumazet@google.com>
[ Moved 'oldval' declaration to the next patch to avoid warnings at
build time. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-3-74b43ba4c84c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While chasing yet another receive autotuning bug,
I found useful to add rcv_ssthresh, window_clamp and rcv_wnd.
tcp_stream 40597 [068] 2172.978198: tcp:tcp_rcvbuf_grow: time=50307 rtt_us=50179 copied=77824 inq=0 space=40960 ooo=0 scaling_ratio=219 rcvbuf=131072 rcv_ssthresh=107474 window_clamp=112128 rcv_wnd=110592
tcp_stream 40597 [068] 2173.028528: tcp:tcp_rcvbuf_grow: time=50336 rtt_us=50206 copied=110592 inq=0 space=77824 ooo=0 scaling_ratio=219 rcvbuf=509444 rcv_ssthresh=328658 window_clamp=435813 rcv_wnd=331776
tcp_stream 40597 [068] 2173.078830: tcp:tcp_rcvbuf_grow: time=50305 rtt_us=50070 copied=270336 inq=0 space=110592 ooo=0 scaling_ratio=219 rcvbuf=509444 rcv_ssthresh=431159 window_clamp=435813 rcv_wnd=434176
tcp_stream 40597 [068] 2173.129137: tcp:tcp_rcvbuf_grow: time=50313 rtt_us=50118 copied=434176 inq=0 space=270336 ooo=0 scaling_ratio=219 rcvbuf=2457847 rcv_ssthresh=1299511 window_clamp=2102611 rcv_wnd=1302528
tcp_stream 40597 [068] 2173.179451: tcp:tcp_rcvbuf_grow: time=50318 rtt_us=50041 copied=1019904 inq=0 space=434176 ooo=0 scaling_ratio=219 rcvbuf=2457847 rcv_ssthresh=2087445 window_clamp=2102611 rcv_wnd=2088960
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-2-74b43ba4c84c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
