| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently CONFIG_GENERIC_ENTRY enables both the generic exception
entry logic and the generic syscall entry logic, which are otherwise
loosely coupled.
Introduce separate config options for these so that architectures can
select the two independently. This will make it easier for
architectures to migrate to generic entry code.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250213130007.1418890-2-ruanjinjie@huawei.com
Link: https://lore.kernel.org/all/20250624-generic-entry-split-v1-1-53d5ef4f94df@linaro.org
[Linus Walleij: rebase onto v6.16-rc1]
|
|
An errant ';' slipped into that definition, which will cause some
compilers to complain when it's used in an application:
timestamp.c:257:45: error: empty expression statement has no effect; remove unnecessary ';' to silence this warning [-Werror,-Wextra-semi-stmt]
257 | hwts = cqe->flags & IORING_CQE_F_TSTAMP_HW;
| ^
Fixes: 9e4ed359b8ef ("io_uring/netcmd: add tx timestamping cmd support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's no need for crc32() to be a macro. Make it an inline function
instead. Also, remove the cast of the data pointer to
'unsigned char const *', which is no longer necessary now that the type
used in the function prototype is 'const void *'.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250619183414.100082-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Document these widely used functions.
Update kernel-api.rst to point to the correct place, instead of to
crc32-main.c which no longer contains kerneldoc comments.
Simplify the documentation in crc32poly.h to just point to the
corresponding functions, now that they are properly documented. Change
the value of CRC32C_POLY_LE to lower case, for consistency.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250619183414.100082-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Rework how lib/crc/ supports arch-optimized code. First, instead of the
arch-optimized CRC code being in arch/$(SRCARCH)/lib/, it will now be in
lib/crc/$(SRCARCH)/. Second, the API functions (e.g. crc32c()),
arch-optimized functions (e.g. crc32c_arch()), and generic functions
(e.g. crc32c_base()) will now be part of a single module for each CRC
type, allowing better inlining and dead code elimination. The second
change is made possible by the first.
As an example, consider CONFIG_CRC32=m on x86. We'll now have just
crc32.ko instead of both crc32-x86.ko and crc32.ko. The two modules
were already coupled together and always both got loaded together via
direct symbol dependency, so the separation provided no benefit.
Note: later I'd like to apply the same design to lib/crypto/ too, where
often the API functions are out-of-line so this will work even better.
In those cases, for each algorithm we currently have 3 modules all
coupled together, e.g. libsha256.ko, libsha256-generic.ko, and
sha256-x86.ko. We should have just one, inline things properly, and
rely on the compiler's dead code elimination to decide the inclusion of
the generic code instead of manually setting it via kconfig.
Having arch-specific code outside arch/ was somewhat controversial when
Zinc proposed it back in 2018. But I don't think the concerns are
warranted. It's better from a technical perspective, as it enables the
improvements mentioned above. This model is already successfully used
in other places in the kernel such as lib/raid6/. The community of each
architecture still remains free to work on the code, even if it's not in
arch/. At the time there was also a desire to put the library code in
the same files as the old-school crypto API, but that was a mistake; now
that the library is separate, that's no longer a constraint either.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20250607200454.73587-3-ebiggers@kernel.org
Link: https://lore.kernel.org/r/20250612054514.142728-1-ebiggers@kernel.org
Link: https://lore.kernel.org/r/20250621012221.4351-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move all CRC files in lib/ into a subdirectory lib/crc/ to keep them
from cluttering up the main lib/ directory.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20250607200454.73587-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Remove crc32_le_combine() and crc32_le_shift(), since they are no longer
used.
Although combination is an interesting thing that can be done with CRCs,
it turned out that none of the users of it in the kernel were even close
to being worthwhile. All were much better off simply chaining the CRCs
or processing zeroes.
Let's remove the CRC32 combination code for now. It can come back
(potentially optimized with carryless multiplication instructions) if
there is ever a case where it would actually be worthwhile.
Link: https://lore.kernel.org/r/20250607032228.27868-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
sha512_base.h is no longer used, so remove it.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-17-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Delete crypto/sha512_generic.c, which provided "generic" SHA-384 and
SHA-512 crypto_shash algorithms. Replace it with crypto/sha512.c which
provides SHA-384, SHA-512, HMAC-SHA384, and HMAC-SHA512 crypto_shash
algorithms using the corresponding library functions.
This is a prerequisite for migrating all the arch-optimized SHA-512 code
(which is almost 3000 lines) to lib/crypto/ rather than duplicating it.
Since the replacement crypto_shash algorithms are implemented using the
(potentially arch-optimized) library functions, give them
cra_driver_names ending with "-lib" rather than "-generic". Update
crypto/testmgr.c and one odd driver to take this change in driver name
into account. Besides these cases which are accounted for, there are no
known cases where the cra_driver_name was being depended on.
This change does mean that the abstract partial block handling code in
crypto/shash.c, which got added in 6.16, no longer gets used. But
that's fine; the library has to implement the partial block handling
anyway, and it's better to do it in the library since the block size and
other properties of the algorithm are all fixed at compile time there,
resulting in more streamlined code.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Since HMAC support is commonly needed and is fairly simple, include it
as a first-class citizen of the SHA-512 library.
The API supports both incremental and one-shot computation, and either
preparing the key ahead of time or just using a raw key. The
implementation is much more streamlined than crypto/hmac.c.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add basic support for SHA-384 and SHA-512 to lib/crypto/.
Various in-kernel users will be able to use this instead of the
old-school crypto API, which is harder to use and has more overhead.
The basic support added by this commit consists of the API and its
documentation, backed by a C implementation of the algorithms.
sha512_block_generic() is derived from crypto/sha512_generic.c.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630160320.2888-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
local_lock.h is the main header for the local_lock_t type and provides
wrappers around internal functions prefixed with __ in
local_lock_internal.h.
Move the this_cpu_ptr() dereference of the variable from the internal to
the main header. Since it is all macro implemented, this_cpu_ptr() will
still happen within the preempt/ IRQ disabled section.
This frees the internal implementation (__) to be used on local_lock_t
types which are local variables and must not be accessed via
this_cpu_ptr().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250630075138.3448715-2-bigeasy@linutronix.de
|
|
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
--v2
-No need to typecast [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
|
|
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
--v2
-Typecase is not needed [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
|
|
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
|
|
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
|
|
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.
--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
|
|
Add bool argument in drm_edp_backlight init to provide the drivers
option to choose if they want to use luminance values to
manipulate brightness.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
|
|
Introduce luminance_set flag which indicates if we can manipulate
backlight using luminance value or not which is only possible
after eDP v1.5.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-2-suraj.kandpal@intel.com
|
|
Add basic IRQ handlers for the function status and jack detection
interrupts.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a library supporting usage of SDCA interrupts, using regmap irq
framework. The library adds functions for parsing ACPI for
interrupt-related information, configuring irq chip and requesting
individual irqs. Calling code (SDCA function code) is expected to also
substitute the library's base irq handler for its own, appropriate
callback.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Zero is a valid SDCA IRQ interrupt position so add a special value to
indicate that the IRQ is not used.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the names a slightly better match for the specification and add
some constants for the values rather than hard coding.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The 'spi-qpic-nand' driver may cause memory corruption under some
circumstances. The first patch in the series changes the driver to
avoid that, whereas the second adds some sanity checks to the common
QPIC code in order to make detecting such errors easier in the future.
|
|
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Instead of using 0 and 1 as magic numbers, let's add proper defines
whose names tell the reader what the meaning behind them is.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624-pwrseq-match-defines-v1-3-a59d90a951f1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This function is not meant to modify the GPIO descriptors in any way so
we can safely constify both arguments.
Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-1-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
v4l2_ctrl_handler_free() used to return void but changing this to int,
returning the handler's error code, enables the drivers to simply return
the handler's error in this common error handling pattern:
if (handler->error)
return v4l2_ctrl_handler_free(handler);
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve the comment describing enum ata_lpm_policy and add comments
within that enum to describe each of the different possible values.
The enum values comments match the description given for the
CONFIG_SATA_MOBILE_LPM_POLICY config parameter.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The ATA device flag ATA_DFLAG_ZAC is used to indicate if a devie is a
host managed or host aware zoned device. However, this flag is not used
in the hot path and only used during device scanning/revalidation and
for inquiry and sense SCSI command translation.
Save one bit from struct ata_device flags field by replacing this flag
with the internal helper function ata_dev_is_zac(). This function
returns true if the device class is ATA_DEV_ZAC (host managed ZAC device
case) or if its identify data reports it supports the zoned command set
(host aware ZAC device case).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Several flags are updated and checked only under namespace_sem; we are
already making use of that when we are checking them without mount_lock,
but we have to hold mount_lock for all updates, which makes things
clumsier than they have to be.
Take MNT_SHARED, MNT_UNBINDABLE, MNT_MARKED and MNT_UMOUNT_CANDIDATE
into a separate field (->mnt_t_flags), renaming them to T_SHARED,
etc. to avoid confusion. All accesses must be under namespace_sem.
That changes locking requirements for mnt_change_propagation() and
set_mnt_shared() - only namespace_sem is needed now. The same goes
for SET_MNT_MARKED et.al.
There might be more flags moved from ->mnt_flags to that field;
this is just the initial set.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The variant currently in the tree has problems; trying to prove
correctness has caught at least one class of bugs (reparenting
that ends up moving the visible location of reparented mount, due
to not excluding some of the counterparts on propagation that
should've been included).
I tried to prove that it's the only bug there; I'm still not sure
whether it is. If anyone can reconstruct and write down an analysis
of the mainline implementation, I'll gladly review it; as it is,
I ended up doing a different implementation. Candidate collection
phase is similar, but trimming the set down until it satisfies the
constraints turned out pretty different.
I hoped to do transformation as a massage series, but that turns out
to be too convoluted. So it's a single patch replacing propagate_umount()
and friends in one go, with notes and analysis in D/f/propagate_umount.txt
(in addition to inline comments).
As far I can tell, it is provably correct and provably linear by the number
of mounts we need to look at in order to decide what should be unmounted.
It even builds and seems to survive testing...
Another nice thing that fell out of that is that ->mnt_umounting is no longer
needed.
Compared to the first version:
* explicit MNT_UMOUNT_CANDIDATE flag for is_candidate()
* trim_ancestors() only clears that flag, leaving the suckers on list
* trim_one() and handle_locked() take the stuff with flag cleared off
the list. That allows to iterate with list_for_each_entry_safe() when calling
trim_one() - it removes at most one element from the list now.
* no globals - I didn't bother with any kind of context, not worth it.
* Notes updated accordingly; I have not touch the terms yet.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Original rationale for those had been the reduced cost of mntput()
for the stuff that is mounted somewhere. Mount refcount increments and
decrements are frequent; what's worse, they tend to concentrate on the
same instances and cacheline pingpong is quite noticable.
As the result, mount refcounts are per-cpu; that allows a very cheap
increment. Plain decrement would be just as easy, but decrement-and-test
is anything but (we need to add the components up, with exclusion against
possible increment-from-zero, etc.).
Fortunately, there is a very common case where we can tell that decrement
won't be the final one - if the thing we are dropping is currently
mounted somewhere. We have an RCU delay between the removal from mount
tree and dropping the reference that used to pin it there, so we can
just take rcu_read_lock() and check if the victim is mounted somewhere.
If it is, we can go ahead and decrement without and further checks -
the reference we are dropping is not the last one. If it isn't, we
get all the fun with locking, carefully adding up components, etc.,
but the majority of refcount decrements end up taking the fast path.
There is a major exception, though - pipes and sockets. Those live
on the internal filesystems that are not going to be mounted anywhere.
They are not going to be _un_mounted, of course, so having to take the
slow path every time a pipe or socket gets closed is really obnoxious.
Solution had been to mark them as long-lived ones - essentially faking
"they are mounted somewhere" indicator.
With minor modification that works even for ones that do eventually get
dropped - all it takes is making sure we have an RCU delay between
clearing the "mounted somewhere" indicator and dropping the reference.
There are some additional twists (if you want to drop a dozen of such
internal mounts, you'd be better off with clearing the indicator on
all of them, doing an RCU delay once, then dropping the references),
but in the basic form it had been
* use kern_mount() if you want your internal mount to be
a long-term one.
* use kern_unmount() to undo that.
Unfortunately, the things did rot a bit during the mount API reshuffling.
In several cases we have lost the "fake the indicator" part; kern_unmount()
on the unmount side remained (it doesn't warn if you use it on a mount
without the indicator), but all benefits regaring mntput() cost had been
lost.
To get rid of that bitrot, let's add a new helper that would work
with fs_context-based API: fc_mount_longterm(). It's a counterpart
of fc_mount() that does, on success, mark its result as long-term.
It must be paired with kern_unmount() or equivalents.
Converted:
1) mqueue (it used to use kern_mount_data() and the umount side
is still as it used to be)
2) hugetlbfs (used to use kern_mount_data(), internal mount is
never unmounted in this one)
3) i915 gemfs (used to be kern_mount() + manual remount to set
options, still uses kern_unmount() on umount side)
4) v3d gemfs (copied from i915)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We have a system which uses 24 SPI chip selects, raise the hard coded
limit accordingly.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250629-spi-increase-number-of-cs-v2-1-85a0a09bab32@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The common QPIC code does not do any boundary checking when it handles
the command elements and scatter gater list arrays of a BAM transaction,
thus it allows to access out of bounds elements in those.
Although it is the responsibility of the given driver to allocate enough
space for all possible BAM transaction variations, however there can be
mistakes in the driver code which can lead to hidden memory corruption
issues which are hard to debug.
This kind of problem has been observed during testing the 'spi-qpic-snand'
driver. Although the driver has been fixed with a preceding patch, but it
still makes sense to reduce the chance of having such errors again later.
In order to prevent such errors, change the qcom_alloc_bam_transaction()
function to store the number of elements of the arrays in the
'bam_transaction' strucutre during allocation. Also, add sanity checks to
the qcom_prep_bam_dma_desc_{cmd,data}() functions to avoid using out of
bounds indices for the arrays.
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-2-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure the new futex phash is not copied during fork in order to
avoid a double-free
* tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Initialize futex_phash_new during fork().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are disabled
(agreed to go in via i2c)
- scx200_acb: fix build error because of missing HAS_IOPORT
* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: scx200_acb: depends on HAS_IOPORT
i2c: omap: Fix an error handling path in omap_i2c_probe()
platform/x86: Use i2c adapter name to fix build errors
i2c: amd-isp: Initialize unique adapter name
i2c: designware: Initialize adapter name only when not set
i2c: tiny-usb: disable zero-length read messages
i2c: robotfuzz-osif: disable zero-length read messages
i2c: imx: fix emulated smbus block read
|
|
Add FourCC definitions for the 48-bit RGB/BGR formats to the
DRM/KMS uapi.
The format will be used by the Raspberry Pi PiSP Back End,
supported by a V4L2 driver in kernel space and by libcamera in
userspace, which uses the DRM FourCC identifiers.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Link: https://lore.kernel.org/r/20240226132544.82817-1-jacopo.mondi@ideasonboard.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 5 are for MM"
* tag 'mm-hotfixes-stable-2025-06-27-16-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add Lorenzo as THP co-maintainer
mailmap: update Duje Mihanović's email address
selftests/mm: fix validate_addr() helper
crashdump: add CONFIG_KEYS dependency
mailmap: correct name for a historical account of Zijun Hu
mailmap: add entries for Zijun Hu
fuse: fix runtime warning on truncate_folio_batch_exceptionals()
scripts/gdb: fix dentry_name() lookup
mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write
mm/alloc_tag: fix the kmemleak false positive issue in the allocation of the percpu variable tag->counters
lib/group_cpus: fix NULL pointer dereference from group_cpus_evenly()
mm/hugetlb: remove unnecessary holding of hugetlb_lock
MAINTAINERS: add missing files to mm page alloc section
MAINTAINERS: add tree entry to mm init block
mm: add OOM killer maintainer structure
fs/proc/task_mmu: fix PAGE_IS_PFNZERO detection for the huge zero folio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a regression where the purgatory code sometimes fails to build"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha256: Mark sha256_choose_blocks as __always_inline
|
|
Define function for reference sync pin registration and callback ops to
set/get current feature state.
Implement netlink handler to fill netlink messages with reference sync
pin configuration of capable pins (pin-get).
Implement netlink handler to call proper ops and configure reference
sync pin state (pin-set).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new netlink attribute to allow user space configuration of reference
sync pin pairs, where both pins are used to provide one clock signal
consisting of both: base frequency and sync signal.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_rtx_syn_ack() is a simple wrapper around tcp_rtx_synack(),
if we move req->num_retrans update.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250626153017.2156274-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now inet_rtx_syn_ack() is only used by TCP, it can directly
call tcp_rtx_synack() instead of using an indirect call
to req->rsk_ops->rtx_syn_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250626153017.2156274-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'icc_bw_lock' mutex is introduced in commit af42269c3523
("interconnect: Fix locking for runpm vs reclaim") in order to decouple
serialization of bw aggregation from codepaths that require memory
allocation.
However commit d30f83d278a9 ("interconnect: core: Add dynamic id
allocation support") added a devm_kasprintf() call into a path protected
by the 'icc_bw_lock' which causes the following lockdep warning on
machines like the Lenovo ThinkPad X13s:
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc3 #15 Not tainted
------------------------------------------------------
(udev-worker)/342 is trying to acquire lock:
ffffb973f7ec4638 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_node_track_caller_noprof+0xa0/0x3e0
but task is already holding lock:
ffffb973f7f7f0e8 (icc_bw_lock){+.+.}-{4:4}, at: icc_node_add+0x44/0x154
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (icc_bw_lock){+.+.}-{4:4}:
icc_init+0x48/0x108
do_one_initcall+0x64/0x30c
kernel_init_freeable+0x27c/0x500
kernel_init+0x20/0x1d8
ret_from_fork+0x10/0x20
-> #0 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x136c/0x2114
lock_acquire+0x1c8/0x354
fs_reclaim_acquire+0x74/0xa8
__kmalloc_node_track_caller_noprof+0xa0/0x3e0
devm_kmalloc+0x54/0x124
devm_kvasprintf+0x74/0xd4
devm_kasprintf+0x58/0x80
icc_node_add+0xb4/0x154
qcom_osm_l3_probe+0x20c/0x314 [icc_osm_l3]
platform_probe+0x68/0xd8
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x160
driver_probe_device+0x40/0x110
__driver_attach+0xfc/0x208
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0x110/0x234
driver_register+0x60/0x128
__platform_driver_register+0x24/0x30
osm_l3_driver_init+0x20/0x1000 [icc_osm_l3]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1df8/0x1f70
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x280
__arm64_sys_finit_module+0x6c/0xd8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x158
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(icc_bw_lock);
lock(fs_reclaim);
lock(icc_bw_lock);
lock(fs_reclaim);
*** DEADLOCK ***
The icc_node_add() functions is not designed to fail, and as such it
should not do any memory allocation. In order to avoid this, add a new
helper function for the name generation to be called by drivers which
are using the new dynamic id feature.
Fixes: d30f83d278a9 ("interconnect: core: Add dynamic id allocation support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20250625-icc-bw-lockdep-v3-1-2b8f8b8987c4@gmail.com
Co-developed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250627075854.26943-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Provide interfaces similar to the ktime_get*() family which provide access
to the auxiliary clocks.
These interfaces have a boolean return value, which indicates whether the
accessed clock is valid or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250625183757.868342628@linutronix.de
|
|
Pull block fixes from Jens Axboe:
- Fixes for ublk:
- fix C++ narrowing warnings in the uapi header
- update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header
- fix for the ublk ->queue_rqs() implementation, limiting a batch
to just the specific task AND ring
- ublk_get_data() error handling fix
- sanity check more arguments in ublk_ctrl_add_dev()
- selftest addition
- NVMe pull request via Christoph:
- reset delayed remove_work after reconnect
- fix atomic write size validation
- Fix for a warning introduced in bdev_count_inflight_rw() in this
merge window
* tag 'block-6.16-20250626' of git://git.kernel.dk/linux:
block: fix false warning in bdev_count_inflight_rw()
ublk: sanity check add_dev input for underflow
nvme: fix atomic write size validation
nvme: refactor the atomic write unit detection
nvme: reset delayed remove_work after reconnect
ublk: setup ublk_io correctly in case of ublk_get_data() failure
ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header
ublk: fix narrowing warnings in UAPI header
selftests: ublk: don't take same backing file for more than one ublk devices
ublk: build batch from IOs in same io_ring_ctx and io task
|
|
Introduces a reset controller driver for the Kendryte K230 SoC,
resposible for managing the reset functionality of the CPUs and
various sub-modules.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
No driver uses it now, remove the core code.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-68a2e1ba507c+1fb-iommu_rm_ops_pgsize_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
