| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add library functions for MD5, including HMAC support. The MD5
implementation is derived from crypto/md5.c. This closely mirrors the
corresponding SHA-1 and SHA-2 changes.
Like SHA-1 and SHA-2, support for architecture-optimized MD5
implementations is included. I originally proposed dropping those, but
unfortunately there is an AF_ALG user of the PowerPC MD5 code
(https://lore.kernel.org/r/c4191597-341d-4fd7-bc3d-13daf7666c41@csgroup.eu/),
and dropping that code would be viewed as a performance regression. We
don't add new software algorithm implementations purely for AF_ALG, as
escalating to kernel mode merely to do calculations that could be done
in userspace is inefficient and is completely the wrong design. But
since this one already existed, it gets grandfathered in for now. An
objection was also raised to dropping the SPARC64 MD5 code because it
utilizes the CPU's direct support for MD5, although it remains unclear
that anyone is using that. Regardless, we'll keep these around for now.
Note that while MD5 is a legacy algorithm that is vulnerable to
practical collision attacks, it still has various in-kernel users that
implement legacy protocols. Switching to a simple library API, which is
the way the code should have been organized originally, will greatly
simplify their code. For example:
MD5:
drivers/md/dm-crypt.c (for lmk IV generation)
fs/nfsd/nfs4recover.c
fs/ecryptfs/
fs/smb/client/
net/{ipv4,ipv6}/ (for TCP-MD5 signatures)
HMAC-MD5:
fs/smb/client/
fs/smb/server/
(Also net/sctp/ if it continues using HMAC-MD5 for cookie generation.
However, that use case has the flexibility to upgrade to a more modern
algorithm, which I'll be proposing instead.)
As usual, the "md5" and "hmac(md5)" crypto_shash algorithms will also be
reimplemented on top of these library functions. For "hmac(md5)" this
will provide a faster, more streamlined implementation.
Link: https://lore.kernel.org/r/20250805222855.10362-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Address the need for a recovery method (firmware flash on Firmware errors)
introduced in the later patches of Xe KMD.
Whenever XE KMD detects a firmware error, a firmware flash is required to
recover the device to normal operation.
The initial proposal to use 'firmware-flash' as a recovery method was
not applicable to other drivers and could cause multiple recovery
methods specific to vendors to be added.
To address this a more generic 'vendor-specific' method is introduced,
guiding users to refer to vendor specific documentation and system logs
for detailed vendor specific recovery procedure.
Add a recovery method 'WEDGED=vendor-specific' for such errors.
Vendors must provide additional recovery documentation if this method
is used.
It is the responsibility of the consumer to refer to the correct vendor
specific documentation and usecase before attempting a recovery.
For example: If driver is XE KMD, the consumer must refer
to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
v2: fix documentation (Raag)
v3: add more details to commit message (Sima, Rodrigo, Raag)
add an example script to the documentation (Raag)
v4: use consistent naming (Raag)
v5: fix commit message
v6: add more documentation
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250826063419.3022216-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add support for DRM_FORMAT_C8 to vesadrm. The new pixel-format
description PIXEL_FORMAT_C8 describes the layout. Vesadrm's helpers
vesadrm_fill_palette_lut() and vesadrm_load_palette_lut() set the
hardware palette according to the CRTC's output format.
The driver emulates XRGB8888 by converting the source buffer to
RGB332 and using the resulting 256 colors as index into the hardware
palette. The hardware palette converts back to RGB during scanout.
This has no overhead compared to other format conversion, but allows
common userspace, such as Wayland compositors, to operate on the
display.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-10-tzimmermann@suse.de
|
|
Add helper drm_crtc_fill_palette_332(), which fills palettes with
RGB332 color data. Each color in RGB332 format serves as an index
into an 8-bit palette that stores the corresponding component-based
colors.
Vesadrm will use the new helper to emulate RGB formats on top of
framebuffers in C8 format.
v2:
- add comments on bit operations (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-6-tzimmermann@suse.de
|
|
Add screen_info_pixel_format(), which converts a screen_info's
information about the color format to struct pixel_format. The encoding
within the screen_info structure is complex and therefore prone to
errors. Later patches will convert callers to use the pixel format.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-3-tzimmermann@suse.de
|
|
Add helpers that compare two pixel-format descriptions against
each other.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-2-tzimmermann@suse.de
|
|
The 'init_nr' argument has double duty: it's used to initialize both the
number of contexts and the number of stack entries. That's confusing
and the callers always pass zero anyway. Hard code the zero.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20250820180428.259565081@kernel.org
|
|
The kernel-doc description of MEMBLOCK_RSRV_NOINIT and
memblock_reserved_mark_noinit() do not accurately describe their
functionality.
Expand their kernel doc to make it clear that the user of
MEMBLOCK_RSRV_NOINIT is responsible to properly initialize the struct pages
for such regions and add more details about effects of using this flag.
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/f8140a17-c4ec-489b-b314-d45abe48bf36@redhat.com
Link: https://lore.kernel.org/r/20250826071947.1949725-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
The VHOST_[GS]ET_FEATURES_ARRAY ioctl already took 0x83 and it would
result in a build error when the vhost uapi header is used for perf tool
build like below.
In file included from trace/beauty/ioctl.c:93:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c: In function ‘ioctl__scnprintf_vhost_virtio_cmd’:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: error: initialized field overwritten [-Werror=override-init]
36 | [0x83] = "SET_FORK_FROM_OWNER",
| ^~~~~~~~~~~~~~~~~~~~~
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: note: (near initialization for ‘vhost_virtio_ioctl_cmds[131]’)
Fixes: 7d9896e9f6d02d8a ("vhost: Reintroduce kthread API and add mode selection")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20250819063958.833770-1-namhyung@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
The commit 206cc44588f7 ("virtio: reject shm region if length is zero")
breaks the Virtio-gpu `host_visible` feature.
As you can see in the snippet below, host_visible_region is zero because
of the `kzalloc`. It's using the `vm_get_shm_region`
(drivers/virtio/virtio_mmio.c:536) to read the `addr` and `len` from
qemu/crosvm.
```
drivers/gpu/drm/virtio/virtgpu_kms.c
132 vgdev = drmm_kzalloc(dev, sizeof(struct virtio_gpu_device), GFP_KERNEL);
[...]
177 if (virtio_get_shm_region(vgdev->vdev, &vgdev->host_visible_region,
178 VIRTIO_GPU_SHM_ID_HOST_VISIBLE)) {
```
Now it always fails.
To fix, revert the offending commit.
Fixes: 206cc44588f7 ("virtio: reject shm region if length is zero")
Signed-off-by: Igor Torrente <igor.torrente@collabora.com>
Message-Id: <20250807124145.81816-1-igor.torrente@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce the DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS ioctl to allow
userspace to query memory attributes of VMAs within a user specified
virtual address range.
Userspace first calls the ioctl with num_mem_ranges = 0,
sizeof_mem_ranges_attr = 0 and vector_of_vma_mem_attr = NULL to retrieve
the number of memory ranges (vmas) and size of each memory range attribute.
Then, it allocates a buffer of that size and calls the ioctl again to fill
the buffer with memory range attributes.
This two-step interface allows userspace to first query the required
buffer size, then retrieve detailed attributes efficiently.
v2 (Matthew Brost)
- Use same ioctl to overload functionality
v3
- Add kernel-doc
v4
- Make uapi future proof by passing struct size (Matthew Brost)
- make lock interruptible (Matthew Brost)
- set reserved bits to zero (Matthew Brost)
- s/__copy_to_user/copy_to_user (Matthew Brost)
- Avod using VMA term in uapi (Thomas)
- xe_vm_put(vm) is missing (Shuicheng)
v5
- Nits
- Fix kernel-doc
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-21-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
|
|
Introduce flag DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC to ensure prefetching
in madvise-advised memory regions
v2 (Matthew Brost)
- Add kernel-doc
v3 (Matthew Brost)
- Fix kernel-doc
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-13-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
|
|
This commit introduces a new madvise interface to support
driver-specific ioctl operations. The madvise interface allows for more
efficient memory management by providing hints to the driver about the
expected memory usage and pte update policy for gpuvma.
v2 (Matthew/Thomas)
- Drop num_ops support
- Drop purgeable support
- Add kernel-docs
- IOWR/IOW
v3 (Matthew/Thomas)
- Reorder attributes
- use __u16 for migration_policy
- use __u64 for reserved in unions
- Avoid usage of vma
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821173104.3030148-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
|
|
Some clients, such as PCIe, may operate at the same clock frequency
across different data rates by varying link width. In such cases,
frequency alone is not sufficient to uniquely identify an OPP.
To support these scenarios, introduce a new API
dev_pm_opp_find_key_exact() that allows OPP lookup with different
set of keys like freq, level & bandwidth.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[ Viresh: Minor cleanups ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Sync with drm-misc-next which is necessary for changes in gpuvm
and gpusvm that will be used in xe.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
migrate_disable() is called to disable migration in the kernel, and it is
often used together with rcu_read_lock().
However, with PREEMPT_RCU disabled, it's unnecessary, as rcu_read_lock()
will always disable preemption, which will also disable migration.
Introduce rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate(),
which will do the migration enable and disable only when PREEMPT_RCU.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250821090609.42508-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
state->an_enabled was removed by
commit 4ee9b0dcf09f ("net: phylink: remove an_enabled")
but is left in mac_config() doc, so clean it.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250824013009.2443580-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_diag_dump() / tcp_diag_dump_one() is just a wrapper of
inet_diag_dump_icsk() / inet_diag_dump_one_icsk(), respectively.
Let's inline them in tcp_diag.c and move static callees as well.
Note that inet_sk_attr_size() is merged into tcp_diag_get_aux_size(),
and we remove inet_diag_handler.idiag_get_aux_size() accordingly.
While at it, BUG_ON() is replaced with DEBUG_NET_WARN_ON_ONCE().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250822190803.540788-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These inet_diag functions required struct inet_hashinfo because
they are shared by TCP and DCCP:
* inet_diag_dump_icsk()
* inet_diag_dump_one_icsk()
* inet_diag_find_one_icsk()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the first
2 functions.
Note that inet_diag_find_one_icsk() don't need hashinfo since the
previous patch.
We will move TCP-specific functions to tcp_diag.c in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These socket lookup functions required struct inet_hashinfo because
they are shared by TCP and DCCP.
* __inet_lookup_established()
* __inet_lookup_listener()
* __inet6_lookup_established()
* inet6_lookup_listener()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the above
4 functions.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since DCCP has been removed, sk->sk_prot->twsk_prot->twsk_destructor
is always tcp_twsk_destructor().
Let's call tcp_twsk_destructor() directly in inet_twsk_free() and
remove ->twsk_destructor().
While at it, tcp_twsk_destructor() is un-exported.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Export airoha_ppe_check_skb routine in ppe_dev ops. check_skb callback
will be used by the MT76 driver in order to offload the traffic received
by the wlan NIC and forwarded to the ethernet one.
Add rx_wlan parameter to airoha_ppe_check_skb routine signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-3-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce airoha_ppe_dev struct as container for PPE offload callbacks
consumed by the MT76 driver during flowtable offload for traffic
received by the wlan NIC and forwarded to the wired one.
Add airoha_ppe_setup_tc_block_cb routine to PPE offload ops for MT76
driver.
Rely on airoha_ppe_dev pointer in airoha_ppe_setup_tc_block_cb
signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-2-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After working with this code for a while, I came across several typos.
This patch fixes them.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250825-gpuvm-typo-fix-v1-1-14e9e78e28e6@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The list_for_each_rcu() relies on the rcu_dereference() API which is not
provided by the list.h. At the same time list.h is a low-level basic header
that must not have dependencies like RCU, besides the fact of the potential
circular dependencies in some cases. With all that said, move RCU related
API to the rculist.h where it belongs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
|
|
Introduce a new HID quirk to indicate that this device has to be enabled
after the panel's backlight is enabled, and update the driver data for
the elan devices to enable this quirk. This cannot be a I2C HID quirk
because the kernel needs to acknowledge this before powering up the
device and read the VID/PID. When this quirk is enabled, register
.panel_enabled()/.panel_disabling() instead for the panel follower.
Also rename the *panel_prepare* functions into *panel_follower* because
they could be called in other situations now.
Fixes: bd3cba00dcc63 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Fixes: d06651bebf99e ("HID: i2c-hid: elan: Add elan-ekth6a12nay timing")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-2-treapking@chromium.org
|
|
Some touch controllers have to be powered on after the panel's backlight
is enabled. To support these controllers, introduce .panel_enabled() and
.panel_disabling() to panel_follower_funcs and use them to power on the
device after the panel and its backlight are enabled.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-1-treapking@chromium.org
|
|
The File Download (FDL) process of SoundWire Class Audio (SDCA) driver,
which provides code/data which may be required by an SDCA device,
utilizes SWFT to obtain that code/data. There is a single SWFT for the
system, and SWFT can contain multiple files (information about the file
as well as its binary contents). The SWFT has a standard ACPI Descriptor
Table Header, followed by SoundWire File definitions as described in
Discovery and Configuration (DisCo) Specification for SoundWire®
Link: https://github.com/acpica/acpica/commit/18c96022
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250811134505.1162661-1-mstrozek@opensource.cirrus.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Similar to regular data, introduce more efficient integrity mapping
helpers that does away with the scatterlist structure. This uses the
block mapping iterator to add IOVA segments if IOMMU is enabled, or maps
directly if not. This also supports P2P segements if integrity data ever
wants to allocate that type of memory.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-7-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not serving any particular purpose. pci_p2pdma_state() already has
all the appropriate checks, so the config and flag checks are not
guarding anything.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-5-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparing for integrity dma mappings, we can't rely on the request
flag because data and metadata may have different mapping types.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This will make it easier to add different sources of the bvec array,
like for upcoming integrity support, rather than assume to use the bio's
bi_io_vec. It also makes iterating "special" payloads more in common
with iterating normal payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The req_iterator happens to have a similar fields to what the dma
iterator needs, but we're not necessarily iterating a request's
bi_io_vec. Create a new type that can be amended for additional future
use.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250813153153.3260897-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The output pixel interface is a parallel bus (32 bits), which
supports sending multiple pixels (1, 2 or 4) per clock cycle for
smaller pixel widths like RAW8-RAW16.
Dual-pixel and Quad-pixel modes can be a requirement if the export rate
of the Cadence IP in Single-pixel mode maxes out before the maximum
supported DPHY-RX frequency, which is the case with TI's integration of
this IP [1].
So, we export a function that lets the downstream hardware block request
a higher pixel-per-clock on a particular output pad.
We check if we can support the requested pixels per clock given the
known maximum for the currently configured format. If not, we set it
to the highest feasible value and return this value to the caller.
[1] Section 12.6.1.4.8.14 CSI_RX_IF Programming Restrictions of AM62 TRM
Link: https://www.ti.com/lit/pdf/spruj16
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document that v4l2_get_link_freq() obtains the link frequency primarily
by calling the get_mbus_config sub-device pad operation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove the workaround that allowed calling v4l2_get_link_freq() on the
control handler.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_subdev_call_state_try() macro allocates a subdev state with
__v4l2_subdev_state_alloc(), but does not check the returned value. If
__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would
cause v4l2_subdev_call_state_try() to crash.
Add proper error handling to v4l2_subdev_call_state_try().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 982c0487185b ("media: subdev: Add v4l2_subdev_call_state_try() macro")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aJTNtpDUbTz7eyJc%40stanley.mountain/
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_subdev_stream_config structure holds configuration data for a
stream. It was meant to be used internally only, but already found its
way into the ds90ub913 driver. Now that the driver has been fixed, make
the structure private to v4l2-subdev.c to avoid using it by accident.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
for_each_set_bit()/find_*_bit() expect arrays of unsigned long (see
include/linux/find.h), but industrialio-core passed const long * into
iio_device_add_info_mask_type{,_avail}().
These masks are used purely as bit arrays and are populated via BIT()
(1UL << n). Switch the info_mask_* fields and the corresponding function
parameters to unsigned long so the types match the helpers. This removes
sparse warnings about signedness mismatches (seen with 'make C=1'
CF='-Wsparse-all') without changing behavior or struct layout.
No functional change intended.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250820004755.69627-1-junjie.cao@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Provide helpers wrapping the read_reg() and write_reg() callbacks of the
generic GPIO API that are called directly by many users. This is done to
hide their implementation ahead of moving them into the separate generic
GPIO struct.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-2-356b4b1d5110@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Provide a helper allowing to convert a struct gpio_chip address to the
struct gpio_generic_chip that wraps it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-1-356b4b1d5110@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We need the char/misc/iio fixes in here as well to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver core and rust fixes in here as well to build on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check for IORING_CQE_F_32 as well, not just if the ring was setup with
IORING_SETUP_CQE32 to only support big CQEs.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds the CQE flags related to supporting a mixed CQ ring mode, where
both normal (16b) and big (32b) CQEs may be posted.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's pretty pointless and only used for the tracing helper, get rid
of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add UAPI flag IORING_URING_CMD_MULTISHOT for supporting multishot
uring_cmd operations with provided buffer.
This enables drivers to post multiple completion events from a single
uring_cmd submission, which is useful for:
- Notifying userspace of device events (e.g., interrupt handling)
- Supporting devices with multiple event sources (e.g., multi-queue devices)
- Avoiding the need for device poll() support when events originate
from multiple sources device-wide
The implementation adds two new APIs:
- io_uring_cmd_select_buffer(): selects a buffer from the provided
buffer group for multishot uring_cmd
- io_uring_mshot_cmd_post_cqe(): posts a CQE after event data is
pushed to the provided buffer
Multishot uring_cmd must be used with buffer select (IOSQE_BUFFER_SELECT)
and is mutually exclusive with IORING_URING_CMD_FIXED for now.
The ublk driver will be the first user of this functionality:
https://github.com/ming1/linux/commits/ublk-devel/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250821040210.1152145-3-ming.lei@redhat.com
[axboe: fold in fix for !CONFIG_IO_URING]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move `struct io_br_sel` into io_uring_types.h and prepare for supporting
provided buffer on uring_cmd.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250821040210.1152145-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the buffer list is stored in struct io_kiocb. The buffer list
can be of two types:
1) Classic/legacy buffer list. These don't need to get referenced after
a buffer pick, and hence storing them in struct io_kiocb is perfectly
fine.
2) Ring provided buffer lists. These DO need to be referenced after the
initial buffer pick, as they need to get consumed later on. This can
be either just incrementing the head of the ring, or it can be
consuming parts of a buffer if incremental buffer consumptions has
been configured.
For case 2, io_uring needs to be careful not to access the buffer list
after the initial pick-and-execute context. The core does recycling of
these, but it's easy to make a mistake, because it's stored in the
io_kiocb which does persist across multiple execution contexts. Either
because it's a multishot request, or simply because it needed some kind
of async trigger (eg poll) for retry purposes.
Add a struct io_buffer_list to struct io_br_sel, which is always on
stack for the various users of it. This prevents the buffer list from
leaking outside of that execution context, and additionally it enables
kbuf to not even pass back the struct io_buffer_list if the given
context isn't appropriately locked already.
This doesn't fix any bugs, it's simply a defensive measure to prevent
any issues with reuse of a buffer list.
Link: https://lore.kernel.org/r/20250821020750.598432-12-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Poison various request fields on free. __io_req_caches_free() is a slow
path, so can be done unconditionally, but gate it on kasan for
io_req_add_to_cache(). Note that some fields are logically retained
between cache allocations and can't be poisoned in
io_req_add_to_cache().
Ideally, it'd be replaced with KASAN'ed caches, but that can't be
enabled because of some synchronisation nuances.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7a78e8a7f5be434313c400650b862e36c211b312.1755459452.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
