summaryrefslogtreecommitdiff
path: root/include/drm
AgeCommit message (Collapse)AuthorFilesLines
2016-06-09drm: Move format-related helpers to drm_fourcc.cLaurent Pinchart3-9/+38
The drm_crtc.c file is a mess, making the ABI documentation confusing since all functions are in the same bag. Split the format-related helpers to a new drm_fourcc.c file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465466048-2020-1-git-send-email-laurent.pinchart@ideasonboard.com
2016-06-09drm/atomic: kerneldoc for drm_atomic_crtc_needs_modesetDaniel Vetter1-0/+10
Just a bit of drive-by ocd. v2: Improve per Liviu's feedback. Cc: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-7-git-send-email-daniel.vetter@ffwll.ch
2016-06-09drm: Replace fb_helper->atomic with mode_config->atomic_commitDaniel Vetter1-11/+0
Drivers transitioning to atomic might not yet want to enable full DRIVER_ATOMIC support when it's not entirely working. But using atomic internally makes a lot more sense earlier. Instead of spreading such flags to more places I figured it's simpler to just check for mode_config->funcs->atomic_commit, and use atomic paths if that is set. For the only driver currently transitioning (i915) this does the right thing. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-23-git-send-email-daniel.vetter@ffwll.ch
2016-06-09drm: Remove dev_pm_ops from drm_classLukas Wunner1-2/+0
The PM core introduced the ability to keep devices runtime suspended during the entire system suspend/resume process with commit aae4518b3124 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily"). Before this so-called "direct-complete" procedure was introduced, devices were always runtime resumed only to be immediately put to sleep again using their ->suspend hook. Direct-complete is enabled by returning a positive value from the ->prepare hook. The PCI core usually does this automatically. Direct-complete is only available for a device if all children use it as well. Currently we cannot support direct-complete for DRM drivers because the DRM core automatically registers multiple DRM minors which belong to device class drm_class, and drm_class uses a struct dev_pm_ops which lacks the ->prepare callback. While this could be solved by adding the missing ->prepare callback, closer inspection shows that there are no DRM drivers left which declare the legacy ->suspend and ->resume callbacks in their drm_driver struct. The last ones to remove them were i915 with commit 1751fcf9f92e ("drm/i915: Fix module initialisation, v2.") and exynos with commit e7fefb1d5af5 ("drm/exynos: remove legacy ->suspend()/resume()"). Consequently the struct dev_pm_ops of drm_class is now dead code. Remove it. If no dev_pm_ops is declared for a device, the PM core automatically enables direct-complete for it, thereby making that mechanism available to the parent DRM PCI devices. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/da848fcd5ca72a35d9a722e644719977a47bb7ba.1465382836.git.lukas@wunner.de
2016-06-09Merge tag 'omapdrm-4.8' of ↵Dave Airlie2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for 4.8 * Update MAINTAINERS file for omapdrm and tilcdc * PLL refactoring to allow versatile use of the PLL clocks * Public omapdss header refactoring to separate omapfb and omapdrm * Gamma table support * Support reset GPIO and vcc regulator in omapdrm's panel-dpi * Minor cleanups * tag 'omapdrm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits) drm/omapdrm: Implement gamma_lut atomic crtc properties drm/omapdrm: Workaround for errata i734 (LCD1 Gamma) in DSS dispc drm/omapdrm: Add gamma table support to DSS dispc drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt() drm/omap: rename panel/encoder Kconfig names drm: omapdrm: add DSI mapping drm: omapdrm: Remove unused omap_framebuffer_bo function drm: omapdrm: Remove unused omap_gem_tiled_size function drm: omapdrm: panel-lgphilips-lb035q02: Remove unused backlight GPIO drm/omap: panel-dpi: implement support for a vcc regulator drm/omap: panel-dpi: make (limited) use of a reset gpio devicetree/bindings: add reset-gpios and vcc-supply for panel-dpi MAINTAINERS: Add maintainer for TI LCDC DRM driver MAINTAINERS: Add maintainer for OMAP DRM driver drm/omap: fix pitch round-up drm/omap: remove align_pitch() drm/omap: remove unnecessary pitch round-up drm/omap: remove unneeded gpio includes drm/omap: Remove the video/omapdss.h and move it's content to local header file [media] omap_vout: Switch to use the video/omapfb_dss.h header file ...
2016-06-09Merge branch 'virtio-gpu-for-airlied' of git://git.kraxel.org/linux into ↵Dave Airlie1-0/+2
drm-next Virtio-gpu updates * 'virtio-gpu-for-airlied' of git://git.kraxel.org/linux: virtio-gpu: use src not crtc virtio-gpu: pick up hotspot from framebuffer add cursor hotspot to drm_framebuffer virtio-gpu: switch to atomic cursor interfaces virtio-gpu: add atomic_commit function virtio-gpu: fix output lookup
2016-06-07drm/dsi: Implement set tear scanlineVinay Simha BN1-0/+1
Provide a small convenience wrapper that transmits a set_tear_scanline command. v2: * helper function suggested by Thierry for set_tear_scanline * Also includes small build fixes from Sumit Semwal. v3: one scanline parameter suggested by jani v4: passing the payload properly as suggested by jani Cc: Archit Taneja <archit.taneja@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465285532-12676-1-git-send-email-simhavcs@gmail.com
2016-06-07drm/atomic: Fix remaining places where !funcs->best_encoder is validBoris Brezillon1-2/+8
Adapt drm_pick_crtcs() and update_connector_routing() to fallback to drm_atomic_helper_best_encoder() if funcs->best_encoder() is NULL so that DRM drivers can leave this hook unassigned if they know they want to use drm_atomic_helper_best_encoder(). Update the vtables documentation accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-2-git-send-email-boris.brezillon@free-electrons.com
2016-06-07drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt()Jyri Sarha2-4/+4
Add drm_crtc_enable_color_mgmt(), remove drm_helper_crtc_enable_color_mgmt() and update drm/i915-driver (the only user of the old function). The new function is more flexible. It allows driver to enable only the features it has without forcing to enable all three color management properties: degamma lut, csc matrix (ctm), and gamma lut. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-06-07drm/core: Change declaration for gamma_set.Maarten Lankhorst2-5/+5
Change return value to int to propagate errors from gamma_set, and remove start parameter. Updates always use the full size, and some drivers even ignore the start parameter altogether. This is needed for atomic drivers, where an atomic commit can fail with -EINTR or -ENOMEM and should be restarted. This is already and issue for drm_atomic_helper_legacy_set_gamma, which this patch fixes up. Changes since v1: - Fix compiler warning. (Emil) - Fix commit message (Daniel) Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Eric Anholt <eric@anholt.net> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Mathieu Larouche <mathieu.larouche@matrox.com> Cc: Thierry Reding <treding@nvidia.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [danvet: Improve commit message a bit more, mention that this fixes the helper.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/742944bc-9f41-1acb-df4f-0fd4c8a10168@linux.intel.com
2016-06-07add cursor hotspot to drm_framebufferGerd Hoffmann1-0/+2
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-03drm/doc: Switch to sphinx/rst fixed-width quotingDaniel Vetter1-0/+2
Just fallout from switching from asciidoc to sphinx/rst. v2: Found more. Also s/\//#/ in the vgpu ascii-art - sphinx treats those as comments and switch to variable-width, which wreaks the layout. v3: Undo some of the hacks, rebasing onto latest version of Jani's series fixed it. Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-03drm/doc: Update kerneldoc for drm_crtc.hDaniel Vetter1-14/+64
Apparently not everyone has been super dutiful with updating this stuff. I still decided to leave out the documentation for all the *_property pointers we have in drm_mode_config. v2: Feedback from Liviu. Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-06-03drm: Store the plane's indexChris Wilson1-3/+46
Currently the plane's index is determined by walking the list of all planes in the mode and finding the position of that plane in the list. A linear walk, especially a linear walk within a linear walk as frequently conceived by i915.ko [O(N^2)] quickly comes to dominate profiles. The plane's index is constant for as long as no earlier planes are removed from the list. For all drivers, planes are static, determined at boot and then untouched until shutdown. In fact, there is no locking provided to allow for dynamic removal of planes/encoders/crtcs. v2: Convert drm_crtc_index() and drm_encoder_index() as well. v3: Stop adjusting the indices upon removal; consider the list construct-only. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> [danvet: Fixup typo in kerneldoc that Matt spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464375900-2542-1-git-send-email-chris@chris-wilson.co.uk
2016-06-03drm/fence: add fence to drm_pending_eventGustavo Padovan1-1/+2
Now a drm_pending_event can either send a real drm_event or signal a fence, or both. It allow us to signal via fences when the buffer is displayed on the screen. Which in turn means that the previous buffer is not in use anymore and can be freed or sent back to another driver for processing. v2: Comments from Daniel Vetter - call fence_signal in drm_send_event_locked() - remove unneeded !e->event check v3: Remove drm_pending_event->destroy to fix a leak when e->file_priv is not set. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (v2) [danvet: fix one e->destroy in arcpgu due to rebasing.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-13-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm/atomic-docs: Spelling fixupsDaniel Vetter1-2/+2
Eric nicely pointed these out, but I failed at git add and lost them. This fixes up commit 2f196b7c4b82eeff3574eb2999e78add33ef4361 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jun 2 16:21:44 2016 +0200 drm/atomic: Add drm_atomic_crtc_state_for_each_plane_state to actually do what it says on the tin^Wcommit message. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-02drm: Consolidate crtc arrays in drm_atomic_stateDaniel Vetter2-7/+11
It's silly to have 2 mallocs when we could tie these two together. Also, Gustavo adds another one in his per-crtc out-fence patches. And I want to add more stuff here for nonblocking commit helpers. In the future we can use this to store a pointer to the preceeding state, making an atomic update entirely free-standing. This will be needed to be able to queue them up with a depth > 1. Cc: Gustavo Padovan <gustavo@padovan.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-12-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm: Consolidate plane arrays in drm_atomic_stateDaniel Vetter2-11/+14
It's kinda pointless to have 2 separate mallocs for these. And when we add more per-plane state in the future it's even more pointless. Right now there's no such thing planned, but both Gustavo's per-crtc fence patches, and some nonblocking commit helpers I'm playing around with will add more per-crtc stuff. It makes sense to also consolidate planes, just for consistency. In the future we can use this to store a pointer to the preceeding state, making an atomic update entirely free-standing. This will be needed to be able to queue them up with a depth > 1. Cc: Gustavo Padovan <gustavo@padovan.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-11-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm: Consolidate connector arrays in drm_atomic_stateDaniel Vetter2-9/+12
It's kinda pointless to have 2 separate mallocs for these. And when we add more per-connector state in the future it's even more pointless. Right now there's no such thing planned, but both Gustavo's per-crtc fence patches, and some nonblocking commit helpers I'm playing around with will add more per-crtc stuff. It makes sense to also consolidate connectors, just for consistency. In the future we can use this to store a pointer to the preceeding state, making an atomic update entirely free-standing. This will be needed to be able to queue them up with a depth > 1. Cc: Gustavo Padovan <gustavo@padovan.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-10-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm/atomic: Add drm_atomic_crtc_state_for_each_plane_stateDaniel Vetter2-2/+58
... and use it in msm&vc4. Again just want to encapsulate drm_atomic_state internals a bit. The const threading is a bit awkward in vc4 since C sucks, but I still think it's worth to enforce this. Eventually I want to make all the obj->state pointers const too, but that's a lot more work ... v2: Provide safe macro to wrap up the unsafe helper better, suggested by Maarten. v3: Fixup subject (Maarten) and spelling fixes (Eric Engestrom). Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464877304-4213-1-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm: Update obsolete information from {enable/disable}_vblank hooks.Liviu Dudau1-5/+5
Since commit 4dfd64862ff8 ("drm: Use vblank timestamps to guesstimate how many vblanks were missed"), the DRM framework can cope with devices that don't have a hardware counter for vsync events without having to keep the vsync interrupts enabled all the time. Drivers handling such hardware should use drm_vblank_no_hw_counter() function for their ->get_vblank_counter hook. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464795342-32297-1-git-send-email-Liviu.Dudau@arm.com
2016-06-02Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel ↵Dave Airlie3-0/+5
into drm-next drm-intel-next-2016-05-22: - cmd-parser support for direct reg->reg loads (Ken Graunke) - better handle DP++ smart dongles (Ville) - bxt guc fw loading support (Nick Hoathe) - remove a bunch of struct typedefs from dpll code (Ander) - tons of small work all over to avoid casting between drm_device and the i915 dev struct (Tvrtko&Chris) - untangle request retiring from other operations, also fixes reset stat corner cases (Chris) - skl atomic watermark support from Matt Roper, yay! - various wm handling bugfixes from Ville - big pile of cdclck rework for bxt/skl (Ville) - CABC (Content Adaptive Brigthness Control) for dsi panels (Jani&Deepak M) - nonblocking atomic commits for plane-only updates (Maarten Lankhorst) - bunch of PSR fixes&improvements - untangle our map/pin/sg_iter code a bit (Dave Gordon) drm-intel-next-2016-05-08: - refactor stolen quirks to share code between early quirks and i915 (Joonas) - refactor gem BO/vma funcstion (Tvrtko&Dave) - backlight over DPCD support (Yetunde Abedisi) - more dsi panel sequence support (Jani) - lots of refactoring around handling iomaps, vma, ring access and related topics culmulating in removing the duplicated request tracking in the execlist code (Chris & Tvrtko) includes a small patch for core iomapping code - hw state readout for bxt dsi (Ramalingam C) - cdclk cleanups (Ville) - dedupe chv pll code a bit (Ander) - enable semaphores on gen8+ for legacy submission, to be able to have a direct comparison against execlist on the same platform (Chris) Not meant to be used for anything else but performance tuning - lvds border bit hw state checker fix (Jani) - rpm vs. shrinker/oom-notifier fixes (Praveen Paneri) - l3 tuning (Imre) - revert mst dp audio, it's totally non-functional and crash-y (Lyude) - first official dmc for kbl (Rodrigo) - and tons of small things all over as usual * 'drm-intel-next' of git://anongit.freedesktop.org/drm-intel: (194 commits) drm/i915: Revert async unpin and nonblocking atomic commit drm/i915: Update DRIVER_DATE to 20160522 drm/i915: Inline sg_next() for the optimised SGL iterator drm/i915: Introduce & use new lightweight SGL iterators drm/i915: optimise i915_gem_object_map() for small objects drm/i915: refactor i915_gem_object_pin_map() drm/i915/psr: Implement PSR2 w/a for gen9 drm/i915/psr: Use ->get_aux_send_ctl functions drm/i915/psr: Order DP aux transactions correctly drm/i915/psr: Make idle_frames sensible again drm/i915/psr: Try to program link training times correctly drm/i915/userptr: Convert to drm_i915_private drm/i915: Allow nonblocking update of pageflips. drm/i915: Check for unpin correctness. Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates" drm/i915: Make unpin async. drm/i915: Prepare connectors for nonblocking checks. drm/i915: Pass atomic states to fbc update functions. drm/i915: Remove reset_counter from intel_crtc. drm/i915: Remove queue_flip pointer. ...
2016-06-02Merge tag 'topic/drm-misc-2016-06-01' of ↵Dave Airlie1-9/+5
git://anongit.freedesktop.org/drm-intel into drm-next Frist -misc pull for 4.8, with pretty much just random all over plus a few more lockless gem BO patches acked/reviewed by driver maintainers. I'm starting a bit earlier this time around because there's a few invasive patch series to land (nonblocking atomic prep work, fence prep work, rst/sphinx kerneldoc finally happening) and I need a baseline with all the branches merged. * tag 'topic/drm-misc-2016-06-01' of git://anongit.freedesktop.org/drm-intel: (21 commits) drm/vc4: Use lockless gem BO free callback drm/vc4: Use drm_gem_object_unreference_unlocked drm: Initialize a linear gamma table by default drm/vgem: Use lockless gem BO free callback drm/qxl: Don't set a gamma table size drm/msm: Nuke dummy gamma_set/get functions drm/cirrus: Drop redundnant gamma size check drm/fb-helper: Remove dead code in setcolreg drm/mediatek: Use lockless gem BO free callback drm/hisilicon: Use lockless gem BO free callback drm/hlcd: Use lockless gem BO free callback vga_switcheroo: Support deferred probing of audio clients vga_switcheroo: Add helper for deferred probing virtio-gpu: fix output lookup drm/doc: Unify KMS Locking docs drm/atomic-helper: Do not call ->mode_fixup for CRTC which will be disabled Fix annoyingly awkward typo in drm_edid_load.c drm/doc: Drop vblank_disable_allow wording drm: use seqlock for vblank time/count drm/mm: avoid possible null pointer dereference ...
2016-05-27Merge tag 'drm-intel-next-fixes-2016-05-25' of ↵Dave Airlie1-0/+92
git://anongit.freedesktop.org/drm-intel into drm-next I see the main drm pull got merged, here's the first batch of fixes for 4.7 already. Fixes all around, a large portion cc: stable stuff. [airlied: the DP++ stuff is a regression fix]. * tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: Stop automatically retiring requests after a GPU hang drm/i915: Unify intel_ring_begin() drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2) drm/i915/psr: Try to program link training times correctly drm/i915/bxt: Adjusting the error in horizontal timings retrieval drm/i915: Don't leave old junk in ilk active watermarks on readout drm/i915: s/DPPL/DPLL/ for SKL DPLLs drm/i915: Fix gen8 semaphores id for legacy mode drm/i915: Set crtc_state->lane_count for HDMI drm/i915/BXT: Retrieving the horizontal timing for DSI drm/i915: Protect gen7 irq_seqno_barrier with uncore lock drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed drm/i915: Respect DP++ adaptor TMDS clock limit drm: Add helper for DP++ adaptors
2016-05-24drm: use seqlock for vblank time/countMatthew Auld1-9/+5
This patch aims to replace the roll-your-own seqlock implementation with full-blown seqlock'. We also remove the timestamp ring-buffer in favour of single timestamp/count pair protected by a seqlock. In turn this means we can now increment the vblank freely without the need for clamping. v2: - reduce the scope of the seqlock, keeping vblank_time_lock - make the seqlock per vblank_crtc, so multiple readers aren't blocked by the writer Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462890088-18194-1-git-send-email-matthew.auld@intel.com
2016-05-23drm: Add helper for DP++ adaptorsVille Syrjälä1-0/+92
Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit ede53344dbfd1dd43bfd73eb6af743d37c56a7c3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)Dave Airlie1-0/+17
The tiled 5K Dell monitor appears to be hiding it's tiled mode inside the displayid timings block, this patch parses this blocks and adds the modes to the modelist. v1.1: add missing __packed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207 Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-21drm: Nuke ->vblank_disable_allowedDaniel Vetter1-8/+0
This was added in commit 0a3e67a4caac273a3bfc4ced3da364830b1ab241 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Sep 30 12:14:26 2008 -0700 drm: Rework vblank-wait handling to allow interrupt reduction. to stay backwards-compatible with old UMS code that didn't even tell the kernel when it did a modeset, so that the kernel could save/restore vblank counters. At worst this means vblanks will be somewhat funky on a setup that very likely no one still runs. So let's just nuke it. Plan B would be to set it unconditionally in drm_vblank_init for kms drivers, instead of in each driver separately. So if this patch breaks anything please only restore the hunks in drmP.h and drm_irq.c, plus add a check for DRIVER_MODESET in drm_vblank_init. Stumbled over this in a discussion on irc with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-19drm/core: Add drm_accurate_vblank_count, v5.Maarten Lankhorst1-0/+1
This function is useful for gen2 intel devices which have no frame counter, but need a way to determine the current vblank count without racing with the vblank interrupt handler. intel_pipe_update_start checks if no vblank interrupt will occur during vblank evasion, but cannot check whether the vblank handler has run to completion. This function uses the timestamps to determine when the last vblank has happened, and interpolates from there. Changes since v1: - Take vblank_time_lock and don't use drm_vblank_count_and_time. Changes since v2: - Don't return time of last vblank. Changes since v3: - Change pipe to unsigned int. (Ville) - Remove unused documentation for tv_ret. (kbuild) Changes since v4: - Add warning to docs when the function is useful. - Add a WARN_ON when get_vblank_timestamp is unavailable. - Use drm_vblank_count. Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v4 Acked-by: David Airlie <airlied@linux.ie> #irc, v4 Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-2-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
2016-05-17Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queuedDaniel Vetter18-94/+299
Backmerge request by Jani to get at commit 249c4f538b1aae55d41699f8bafc6cb762a7f48f Author: Deepak M <m.deepak@intel.com> Date: Wed Mar 30 17:03:39 2016 +0300 drm: Add new DCS commands in the enum list Some simple conflicts in intel_dp.c. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-05-17drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()Noralf Trønnes1-0/+3
Add drm_fb_cma_create_with_funcs() for drivers that need to set the dirty() callback. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463077523-23959-3-git-send-email-noralf@tronnes.org
2016-05-17drm/fb-cma-helper: Use const for drm_framebuffer_funcs argumentNoralf Trønnes1-1/+1
drm_framebuffer_init() uses const for the drm_framebuffer_funcs argument so use that on drm_fb_cma_alloc() and drm_fbdev_cma_create_with_funcs() as well. Cc: laurent.pinchart@ideasonboard.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463077523-23959-2-git-send-email-noralf@tronnes.org
2016-05-17drm: Drop connector argument from __drm_atomic_helper_connector_destroy_stateDaniel Vetter1-2/+1
It's unused, and really this helper should only look at the state structure and nothing else. Note that this conflicts with a patch from Dave that adds refcounting to drm_connectors. It's not yet clear whether the check Dave adds for connector != NULL is really needed or the right check. v2: Fix commmit message (Laurent). Cc: Dave Airlie <airlied@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-3-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Drop plane argument from __drm_atomic_helper_plane_destroy_stateDaniel Vetter1-2/+1
It's unused, and really this helper should only look at the state structure and nothing else. v2: Fix commit message (Laurent). v3: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Drop crtc argument from __drm_atomic_helper_crtc_destroy_stateDaniel Vetter1-2/+1
It's unused, and really this helper should only look at the state structure and nothing else. v2: Rebase on top of rockchip changes v3: Drop unrelated hunk, spotted by Laurent. v4: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Remove unused drm_device from drm_gem_object_lookup()Chris Wilson1-3/+1
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-05-17Merge tag 'topic/drm-misc-2016-05-13' of ↵Dave Airlie1-0/+2
git://anongit.freedesktop.org/drm-intel into drm-next I kinda hoped that I could still sneak in Noralf's drm_simple_display_pipe, since there's intereset by others now (for tilcdc at least). But it wasn't ready by a hair. Oh well. Otherwise random stuff plus prep patches from Noralf. * tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel: drm/atomic: Add drm_atomic_helper_best_encoder() drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs drm/fb-cma-helper: Hook up to DocBook and fix some docs drm/fb-helper: Remove mention of CONFIG_FB_DEFERRED_IO in docs drm/sti: include linux/seq_file.h where needed drm/tegra: Use lockless gem BO free callback drm/exynos: Use lockless gem BO free callback drm: Make drm_encoder_helper_funcs optional
2016-05-12drm/dp: Add define to set 0.5% down-spread in MAX_DOWNSPREAD registerEnric Balletbo i Serra1-0/+1
Support of 0.5% down-spread is required for DisplayPort Specification Version 1.1 Sink. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [treding@nvidia.com: rename to DP_MAX_DOWNSPREAD_0_5] Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-05-11drm/atomic: Add drm_atomic_helper_best_encoder()Noralf Trønnes1-0/+2
Add (struct drm_connector_helper_funcs *)->best_encoder callback helper for connectors that support exactly 1 encoder, statically determined at driver init time. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462982962-10530-6-git-send-email-noralf@tronnes.org
2016-05-09drm: Add helper for DP++ adaptorsVille Syrjälä1-0/+92
Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1462542412-25533-1-git-send-email-ville.syrjala@linux.intel.com
2016-05-09Merge tag 'v4.6-rc7' into drm-nextDave Airlie1-0/+2
Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
2016-05-09Merge tag 'topic/drm-misc-2016-05-08' of ↵Dave Airlie2-1/+60
git://anongit.freedesktop.org/drm-intel into drm-next Refcounting is hard, so here's a quick pull request with the one-liner to fix up i915. Otherwise just a few other small things I picked up. Plus the regression fix from Marten for rmfb behaviour that lingered around forever since no testers. Feel free to cherry-pick that over to drm-fixes, but given that there's not many who seemed to have cared, meh. * tag 'topic/drm-misc-2016-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Correctly refcount connectors in hw state readou drm/panel: Flesh out kerneldoc drm: Add gpu.tmpl docbook to MAINTAINERS entry drm/core: Do not preserve framebuffer on rmfb, v4. drm: Fix up markup fumble drm/fb_helper: Fix a few typos
2016-05-06drm/panel: Flesh out kerneldocThierry Reding1-0/+59
Write more complete kerneldoc comments for the DRM panel API and integrate the helpers in the DRM DocBook reference. Signed-off-by: Thierry Reding <treding@nvidia.com>drm/panel: Add helper for simple panel connector Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160506140137.GA4641@ulmo.ba.sec
2016-05-06Merge branch 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu into ↵Dave Airlie1-0/+9
drm-next fsl-dcu pixel clock polarity support * 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: use bus_flags for pixel clock polarity drm: introduce bus_flags in drm_display_info
2016-05-06Merge branch 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2-12/+21
into drm-next This is the first big radeon/amdgpu pull request for 4.7. Highlights: - Polaris support in amdgpu Current display stack on par with other asics, for advanced features DAL is required Power management support Support for GFX, Compute, SDMA, UVD, VCE - VCE and UVD init/fini cleanup in radeon - GPUVM improvements - Scheduler improvements - Clockgating improvements - Powerplay improvements - TTM changes to support driver specific LRU update mechanism - Radeon support for new Mesa features - ASYNC pageflip support for radeon - Lots of bug fixes and code cleanups * 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux: (180 commits) drm/amdgpu: Replace rcu_assign_pointer() with RCU_INIT_POINTER() drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefresh drm/amdgpu/uvd6: add bypass support for fiji (v3) drm/amdgpu/fiji: set UVD CG state when enabling UVD DPM (v2) drm/powerplay: add missing clockgating callback for tonga drm/amdgpu: Constify some tables drm/amd/powerplay: Delete dead struct declaration drm/amd/powerplay/hwmgr: don't add invalid voltage drm/amd/powerplay/hwmgr: prevent VDDC from exceeding 2V MAINTAINERS: Remove unneded wildcard for the Radeon/AMDGPU drivers drm/radeon: add cayman VM support for append packet. drm/amd/amdgpu: Add debugfs entries for smc/didt/pcie drm/amd/amdgpu: Drop print_status callbacks. drm/amd/powerplay: revise reading/writing pptable on Polaris10 drm/amd/powerplay: revise reading/writing pptable on Tonga drm/amd/powerplay: revise reading/writing pptable on Fiji drm/amd/powerplay: revise caching the soft pptable and add it's size drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2) drm/amd/powerplay: fix fan speed percent setting error on Polaris10 drm/amd/powerplay: fix bug dpm can't work when resume back on Polaris ...
2016-05-05drm: introduce bus_flags in drm_display_infoStefan Agner1-0/+9
Introduce bus_flags to specify display bus properties like signal polarities. This is useful for parallel display buses, e.g. to specify the pixel clock or data enable polarity. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stefan Agner <stefan@agner.ch>
2016-05-05drm: Fix up markup fumbleDaniel Vetter1-1/+1
It's & for struct references, not #. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462369327-26659-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-05drm/modes: add connector reference counting. (v2)Dave Airlie1-1/+31
This uses the previous changes to add reference counts to drm connector objects. v2: move fbdev changes to their own patch. add some kerneldoc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/fb: fix missing /** in kerneldoc comment.Dave Airlie1-1/+1
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-04drm/ttm: implement LRU add callbacks v2Christian König1-0/+9
This allows fine grained control for the driver where to add a BO into the LRU. v2: fix typo in comment Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.54.0.dirty) at 2026-09-29 16:58:18 +0000