| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path.
Fixes: f6dbf83c17cb ("iio: light: gp2ap002: Take runtime PM reference on light read")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced.
Fixes: 0c3a333524a3 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early.
Fixes: 9a9a369d6178 ("iio: accel: kxsd9: Deploy system and runtime PM")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.
Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Ensure that if a device has Vref1 but reading the regulator returns an
error, mcp47feb02_init_ctrl_regs() is not called with an uninitialized
vref1_uV value. Also add a device_property_present() check for the Vref1
supply before reading the regulator.
Fixes: dd154646d292 ("iio: dac: mcp47feb02: Fix Vref validation [1-999] case")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/adiPnla0M5EzvgD-@stanley.mountain/
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error.
Fixes: a9306887eba41 ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The AD7380 driver uses generic regmap types and APIs. However, its
Kconfig entry does not select REGMAP.
As a result, AD7380 can be enabled from an allnoconfig-derived config
with SPI_MASTER=y while REGMAP remains unset, causing ad7380.o to fail
to build.
Fixes: b095217c104b ("iio: adc: ad7380: new driver for AD7380 ADCs")
Signed-off-by: Samuel Moelius <samuel.moelius@trailofbits.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
Fixes: 0e1a47fcabc8 ("drm/xe: Add a helper for DRM device-lifetime BO create")
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Zongyao Bai <zongyao.bai@intel.com>
Link: https://patch.msgid.link/20260626210631.3887291-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
|
|
The local "finish" pointer in xe_vma_userptr_force_invalidate() is
unconditionally written before each read, so the static storage class
serves no purpose. Worse, it makes the variable a process-wide shared
slot: the function's per-VM asserts do not exclude concurrent callers
on different VMs, so two such callers can race on the slot and take
the wrong if (finish) branch.
The function is gated by CONFIG_DRM_XE_USERPTR_INVAL_INJECT
(developer/test option, default n), so production builds are
unaffected.
Drop the static.
Fixes: 18c4e536959e ("drm/xe/userptr: Convert invalidation to two-pass MMU notifier")
Assisted-by: Claude:claude-opus-4.7
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Zongyao Bai <zongyao.bai@intel.com>
Link: https://patch.msgid.link/20260625224452.3243231-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
|
|
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \
drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper]
Call Trace:
xe_vma_userptr_do_inval+0x40d/0xfd0 [xe]
xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe]
xe_vma_userptr_force_invalidate+0xde/0x290 [xe]
vma_check_userptr.constprop.0+0x1c6/0x220 [xe]
xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe]
...
xe_vm_bind_ioctl+0x3a0a/0x4480 [xe]
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Assisted-by: Claude:claude-opus-4.7
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Zongyao Bai <zongyao.bai@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260625215615.3016892-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add a new helper clk_determine_rate_noop() that's for clocks where the
rate rounding is handled by the firmware/hardware, or the clock is
capable of any rate. The requested rate is passed through unchanged,
and the actual rate will be learned via recalc_rate() after the rate
is set.
This shared helper will be used to get rid of the driver-specific empty
determine rate implementations that are present in the tree.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The init.ops is assigned a default value, however right below it is an
if, else if, and else where all of them also assign a value to init.ops.
Drop the redundant init.ops assignment at the top.
Fixes: 3b9ea606cda53 ("clk: imx: scu: add cpu frequency scaling support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Convert the DUMMY_CLOCK_* constants over to use HZ_PER_MHZ.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Document all of the members of struct clk_core.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The HiSilicon clock symbols already depend on ARCH_HISI or COMPILE_TEST,
but the parent clock Makefile only descends into the hisilicon directory
when ARCH_HISI is enabled.
Add a hidden family gate selected by the HiSilicon clock and reset symbols,
default it for ARCH_HISI, and use it for the parent Makefile descent. This
keeps existing platform builds unchanged while allowing compile-test
coverage.
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/hisilicon/
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Sashiko detected potential coefficient overflow if large shunt resistor
is used. When going unnoticed it can cause "drastically incorrect
telemetry scaling factors" as Sashiko put it.
I am not convinced such "drastically incorrect telemetry scaling
factors" could have gone unnoticed, so I suspect such large shunt
resistors aren't really used. Well, it shouldn't hurt to detect the
error and abort the probe before Really Wrong current / power -values
are reported to user by the hwmon.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/d9e3320dbd62e094ff89598cb3aac5b5e716f9e7.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 87102808d039 ("hwmon: (pmbus/adm1275) Validate device ID")
Link: https://lore.kernel.org/r/c8ad38e0cdb347261c6245de2b7965e747f28d22.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a proper NULL check for the kmalloc() return value in syslog_show().
If memory allocation fails, syslog would be NULL and passing it to
misc_syslog() could lead to a NULL pointer dereference.
Fixes: 80a4062e8821 ("firmware: imx: sm-misc: Dump syslog info")
Signed-off-by: Li Jun <lijun01@kylinos.cn>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The Kconfig entry for the MAX6697 sensor doesn't contain a
`select REGMAP_I2C` parameter, causing build failures if regmap
isn't selected previously during the build process.
Fixes: 3a2a8cc3fe24 ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260629-add-kconfig-deps-v1-3-8104df929b1a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Kconfig entry for the LTC2992 sensor doesn't contain a
`select REGMAP_I2C` parameter, causing build failures if regmap
isn't selected previously during the build process.
Fixes: b0bd407e94b0 ("hwmon: (ltc2992) Add support")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260629-add-kconfig-deps-v1-2-8104df929b1a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Kconfig entry for the MAX1619 sensor doesn't contain a
`select REGMAP` parameter, causing build failures if regmap
isn't selected previously during the build process.
Fixes: f8016132ce49 ("hwmon: (max1619) Convert to use regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260629-add-kconfig-deps-v1-1-8104df929b1a@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
w83627hf_probe() creates cpu0_vid and vrm with device_create_file() when
VID information is available.
The error path and remove callback only remove the common and optional
attribute groups. Those groups do not contain cpu0_vid or vrm, so the
files can remain after a later probe failure or after device removal
while their callbacks still expect live driver data.
Remove the standalone VID sysfs files from both the probe error path and
the remove callback.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260615064732.48113-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
w83793_probe() creates the vrm sysfs file after creating the VID files
when VID support is present.
The normal remove path deletes vrm, but the probe error path only
removes the sensor, SDA, VID, fan, PWM and temperature files. A later
probe failure can therefore leave vrm behind after the driver data has
been freed.
Remove vrm in the probe error path next to the VID files, matching the
normal remove path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260615064806.51139-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The nointxmask and disable_idle_d3 module parameters remain writable,
but vfio-pci now latches their values into each device at init. Once a
device is registered, changing the module parameter only affects future
devices, leaving no direct way to confirm the effective policy for an
existing device.
Add a pci debugfs directory under the VFIO device debugfs root and
report the per-device nointxmask and disable_idle_d3 values. These are
read-only debugfs views and use the same Y/N bool output convention as
the module parameters.
Read-only vfio-pci parameters, such as disable_vga, are not exposed here
because they cannot drift from the latched device value, therefore the
existing module parameter exposure via sysfs is sufficient.
Note that while only vfio-pci currently provides these options, the
implementation is in vfio-pci-core and therefore properly reflects the
device policy in the core, regardless of driver.
Assisted-by: OpenAI Codex:gpt-5
Cc: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-7-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister.
Fixes: 2202844e4468 ("vfio/migration: Add debugfs to live migration driver")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260615192725.6A2221F000E9@smtp.kernel.org
Cc: stable@vger.kernel.org
Cc: Longfang Liu <liulongfang@huawei.com>
Assisted-by: OpenAI Codex:gpt-5
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615204717.735302-1-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Using devm_kmalloc() does not zero-initialize the allocated structure.
Uninitialized members in struct hisi_reset_controller may contain garbage
data, which can cause reset_controller_register() to fail unexpectedly.
Replace devm_kmalloc() with devm_kzalloc() to ensure all structure fields
are properly zero-initialized.
Fixes: 97b7129cd2afb ("reset: hisilicon: change the definition of hisi_reset_init")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Min zhang <zhangmin2026@yeah.net>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add short descriptions for 3 functions which are missing it.
Modify the parameter name in comments to be @core instead of clk.
Use corrected function names (with leading "__") in a few places.
Warning: drivers/clk/clk.c:1899 missing initial short description on line:
* __clk_recalc_accuracies
Warning: drivers/clk/clk.c:1972 missing initial short description on line:
* __clk_recalc_rates
Warning: drivers/clk/clk.c:2244 missing initial short description on line:
* __clk_speculate_rates
This eliminates warnings in this file except for missing return value
warnings, of which there are around 70.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # clk-versaclock5
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The driver doesn't make use of the value that was explicitly assigned to
the .driver_data member. Drop the assignment.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The vfio-pci module parameters of disable_idle_d3, nointxmask, and
disable_vga latch vfio-pci policy into vfio-pci-core globals each time
the vfio-pci module is initialized. The disable_idle_d3 parameter has
already migrated to a per-device flag in order to provide consistency
for refcounted PM operations for the lifetime of the device
registration.
Pull the remaining vfio-pci module-parameter policy out of vfio-pci-core
into per-device flags set at device initialization.
This also restores the mutable aspect of the disable_idle_d3 and
nointxmask module parameters for vfio-pci, with the caveat that the
parameters are latched into the device at probe.
A notable change for variant drivers is that their devices are no longer
affected by vfio-pci module parameters and those drivers may need to
adopt similar module parameters if any devices have a hidden dependency
on vfio-pci setting non-default policy.
Assisted-by: Claude:claude-opus-4-8
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-6-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.
Bitfield justifications:
migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe
Dedicated storage units:
mdev_detach: written in the VF attach/detach event notifier
mlx5fv_vf_event() at runtime
log_active: written in mlx5vf_start_page_tracker()/
mlx5vf_stop_page_tracker() during runtime dirty tracking
deferred_reset: written in mlx5vf_state_mutex_unlock()/
mlx5vf_pci_aer_reset_done() during runtime reset handling
is_err: set by tracker error handling and dirty-log polling at runtime
object_changed: set by tracker event handling and cleared by dirty-log
polling at runtime
Fixes: 61a2f1460fd0 ("vfio/mlx5: Manage the VF attach/detach callback from the PF")
Fixes: 79c3cf279926 ("vfio/mlx5: Init QP based resources for dirty tracking")
Fixes: f886473071d6 ("vfio/mlx5: Add support for tracker object change event")
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-5-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout.
Fixes: 4aeec3984ddc ("vfio/pci: Re-order vfio_pci_probe()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-3-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.
Fixes: 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Similar to the issue fixed in commit 542440fd7b30 ("regmap: maple: work
around gcc-14.1 false-positive warning"), I see an uninitialized warning
for upper_index and upper_last.
Happens with arc-linux-gnu-gcc (Debian 15.3.0-1) 15.3.0 on an
allmodconfig for ARCH=arc.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260626060427.2548578-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the list of included headers in stk8312.c using
Include-What-You-Use (IWYU) tool, mainly to remove kernel.h and add
missing headers such as array_size.h, bits.h, dev_printk.h, etc.
Meanwhile, sort these headers in alphabetical order.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The current code uses mutex_init() instead of devm_mutex_init(), which
is incorrect as the rest of the file uses the devm automatic resource
management API. Fix this so that the mutex is set up in the same way as
the rest of the device data structure.
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The buffer length is known to be KUNIT_PARAM_DESC_SIZE
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
