| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
platforms
On systems where the USCS ACPI method is absent, acpi_evalf() returns
AE_NOT_FOUND which maps to -EIO. This caused tpacpi_usbc_security_init()
to propagate the error and thinkpad_acpi failed to probe entirely on
unsupported platforms.
Fix this by checking for USCS method presence with acpi_has_method() before
attempting to call it, returning -ENODEV immediately if absent.
This follows the same pattern used by other subdrivers in thinkpad_acpi.c.
Fixes: 67e8d1e9cacd ("platform/x86: thinkpad_acpi: Add USB-C Security (USCS) support")
Reported-by: Oliver Lin <oliver@liuxiaozhen.dev>
Closes: https://lore.kernel.org/platform-driver-x86/239c8162-e1e6-4b49-8292-35547c5a525c@liuxiaozhen.dev/
Tested-by: Oliver Lin <oliver@liuxiaozhen.dev>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://patch.msgid.link/20260715010205.514132-1-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc4).
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core into gpio/for-next
software node: provide support for fw_devlink
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
|
|
The remove function is missing a call to media_entity_cleanup(). Add it.
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The remove function is missing a call to media_entity_cleanup(). Add it.
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The remove function and the probe error path are missing calls to
media_entity_cleanup(). Add them.
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The remove function is missing a call to media_entity_cleanup(). Add it.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The remove function is missing a call to media_entity_cleanup(). Add it.
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
dvb_dmxdev_add_pid() allocates a new dmxdev_feed, links it into
filter->feed.ts and, when the filter is already running, immediately
starts the feed.
If starting the feed fails, the newly allocated feed remains on the
list. Subsequent restart and rollback paths may then operate on this
stale entry, leaving feed resources allocated and causing leaks in
drivers that allocate resources from ->start_feed() and release them
from ->stop_feed().
Remove the feed from the list and free it when
dvb_dmxdev_start_feed() fails.
Reported-by: syzbot+e9a1f5e196de6663631b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e9a1f5e196de6663631b
Signed-off-by: Rituparna Warwatkar <rwarwatkar@gmail.com>
Link: https://patch.msgid.link/20260714141059.63582-1-rwarwatkar@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <20260714141059.63582-1-rwarwatkar@gmail.com>
|
|
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfunctioning device can therefore report a jpg_size
larger than the destination vb2 plane, and the memcpy() writes past it.
jpg_size is a signed int, so a value with the top bit set also turns
into a huge length.
Reject a frame whose jpg_size is negative or exceeds the plane size
before copying it.
Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The brightness and contrast paths use oldvalue after read_reg_fp()
without checking whether the read succeeded. A failed read leaves
oldvalue uninitialized and can write arbitrary reserved register bits.
Return read and write errors from every control path so failed hardware
access cannot be reported as a successful control update.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix 'WARNING: Prefer 'unsigned int' to bare use of 'unsigned''
reported by checkpatch.pl in s2255drv.c.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 4 'WARNING: braces {} are not necessary for single statement
blocks' issues reported by checkpatch.pl in s2255drv.c. Remove braces
from single-statement if blocks where they are not needed.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 5 'WARNING: Unnecessary ftrace-like logging - prefer using
ftrace' issues reported by checkpatch.pl in s2255drv.c. Remove
dprintk/dev_info calls that only print the function name, as ftrace
can provide the same function tracing information.
Fix all 3 'WARNING: Possible unnecessary 'out of memory' message'
issues reported by checkpatch.pl in s2255drv.c. The kernel's memory
allocator already prints a warning on allocation failure, making
these messages redundant.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 7 'WARNING: void function return statements are not generally
useful' issues reported by checkpatch.pl in s2255drv.c. Remove
trailing 'return;' statements that immediately precede the closing
brace in void functions.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 'WARNING: Block comments use * on subsequent lines' and
'WARNING: Block comments use a trailing */ on a separate line'
issues reported by checkpatch.pl in s2255drv.c. Convert block
comments to kernel-style format with leading '*' on continuation
lines and '*/' on its own line. Convert banner-style separator
comments to single-line format.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 22 'WARNING: Missing a blank line after declarations' issues
reported by checkpatch.pl in s2255drv.c. Insert a blank line between
local variable declarations and the first statement in each function.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix 'CHECK: Macro argument 'dev' may be better as '(dev)' to avoid
precedence issues' reported by checkpatch.pl in s2255drv.c. Wrap
the 'dev' macro argument in parentheses in the dprintk macro.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 11 'CHECK: Unnecessary parentheses around' issues reported by
checkpatch.pl in s2255drv.c. Remove redundant inner parentheses from
if-condition expressions where operator precedence already guarantees
the correct evaluation order.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 3 'CHECK: spaces preferred around that '*' (ctx:VxV)' issues
reported by checkpatch.pl in s2255drv.c. Add spaces around the
multiplication operators in the SYS_FRAMES_MAXSIZE macro.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 2 'CHECK: Please use a blank line after function/struct/union/enum
declarations' issues reported by checkpatch.pl in s2255drv.c.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove all 9 instances of double blank lines: 'CHECK: Please don't use
multiple blank lines' reported by checkpatch.pl in s2255drv.c.
Fix all 3 'CHECK: Blank lines aren't necessary before a close brace'
issues reported by checkpatch.pl in s2255drv.c.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 16 'CHECK: Alignment should match open parenthesis' issues
reported by checkpatch.pl in s2255drv.c. Adjust continuation line
indentation in function declarations, if-conditions, function calls,
and block comments to properly align with the opening parenthesis.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 15 'CHECK: Comparison to NULL could be written' issues reported by
checkpatch.pl in s2255drv.c. Replace 'x == NULL' with '!x' for pointer
NULL checks.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 5 'CHECK: braces {} should be used on all arms of this statement'
issues reported by checkpatch.pl in s2255drv.c. Add braces to else and
else-if branches that were missing them for consistency with other
branches.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix all 8 'CHECK: No space is necessary after a cast' issues reported by
checkpatch.pl in s2255drv.c. Remove the space between the cast type and
the value being cast.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename CamelCase identifiers throughout s2255drv.c to comply with the
Linux kernel coding style. All identifiers are local to this file
(no header file or cross-file references).
Struct members:
ulState -> state
dwFrames -> num_frames
Function parameters (s2255_vendor_req, also updating the forward
declaration to match):
Request -> req
Index -> index
Value -> value
TransferBuffer -> xfer_buf
TransferBufferLength -> xfer_buf_len
bOut -> is_out
Local variables:
pY/pCb/pCr -> p_y/p_cb/p_cr
linesPerFrame -> lines_per_frame
pixelsPerLine -> pixels_per_line
outImageSize -> out_image_size
usbInSize -> usb_in_size
transBuffer -> trans_buf
pRel -> p_rel
No functional changes.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the error-path goto labels in s2255_probe() from CamelCase to
snake_case to comply with the Linux kernel coding style:
errorBOARDINIT -> err_boardinit
errorFWMARKER -> err_fwmarker
errorREQFW -> err_reqfw
errorFWDATA2 -> err_fwdata2
errorFWURB -> err_fwurb
errorEP -> err_ep
errorUDEV -> err_udev
errorFWDATA1 -> err_fwdata1
No functional changes; all label definitions and goto references are
updated consistently.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
backlight
Turns out some panels allow only AUX based backlight
by just setting the DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP and
not setting the DP_EDP_BACKLIGHT_AUX_ENABLE_CAP.
If we make DP_EDP_BACKLIGHT_AUX_ENABLE_CAP a necessity for AUX
based DPCD backlight these panels loose the ability to manipulate
backlight via AUX, especially ones with no PWM controller.
Remove this check from function so that panels who do not advertise
DP_EDP_BACKLIGHT_AUX_ENABLE_CAP but advertise
DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP are able to manipulate
backlight again.
Fixes: ed8be780bdbc ("drm/i915/backlight: Fix VESA backlight possible check condition")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16507
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260716030959.436430-1-suraj.kandpal@intel.com
|
|
Add initial support to query uncorrectable device memory errors from
system controller. The recovery action for memory errors depends on the
error category. Firmware will set only one error category per response.
Double bit ECC (Error Correcting Code) errors will be handled using Page
offlining in a later patch. Poison and data parity errors are only logged.
Rest of the errors require SBR (Secondary Bus Reset) to recover.
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260717141650.2487761-8-riana.tauro@intel.com
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
|
|
Some critical errors such as CSC firmware and Punit are reported under SoC
internal errors and require special handling.
CSC errors are classified into hardware errors and firmware errors.
Hardware errors can be recovered using a SBR (Secondary Bus Reset) whereas
firmware errors are critical and require a firmware flash. On such errors,
device is wedged and runtime survivability mode will be enabled to notify
userspace that a firmware flash is required.
PUNIT uncorrectable errors can only be recovered through a cold reset.
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260717141650.2487761-7-riana.tauro@intel.com
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
|
|
On CSC runtime firmware errors that requires firmware flash through SPI,
PCODE sets the FDO mode bit in the Capability register.
Currently the survivability_info group is created only for boot
survivability.
Create survivability_info group even for runtime survivability to allow
userspace to check FDO mode sysfs.
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260717141650.2487761-6-riana.tauro@intel.com
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://lore.kernel.org/r/20260717112103.213017-3-panchuang@vivo.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
On ARM64 platforms, certain reserved memory regions (like those used
by pKVM) are marked with the 'no-map' property. This indicates that
the host kernel is forbidden from creating a structural mapping for
these regions.
The coreboot table may describe CBMEM entries that overlap with or are
entirely contained within these no-map regions. Attempting to populate
these entries as devices and subsequently remapping them can lead to
system crashes or security violations.
Refine the coreboot table population logic to verify that each CBMEM
entry resides in 'Known Good' memory before creating a device. An
entry is only considered safe if it is entirely System RAM or entirely
standard Reserved memory (tagged with IORES_DESC_RESERVED).
This dual-check ensures that:
1. On ARM64, no-map regions are filtered out as they are IORESOURCE_MEM
(see request_standard_resources() in arch/arm64/kernel/setup.c).
2. On x86, standard reserved regions (IORES_DESC_RESERVED) remain
supported.
Signed-off-by: Yidi Lin <yidilin@google.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://lore.kernel.org/r/20260717-coreboot-v2-1-8f8b389e3758@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Split the logic inside the opt3001_get_processed() function, as the
current flow is hard to read, mixing IRQ and non-IRQ code blocks.
Separate the IRQ code path into its own function, same for the
non-IRQ path.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Don't populate the read-only const array config on the stack at run
time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Don't populate the read-only const array regulator_names on the stack
at run time, instead make it static const char * const
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
When two commands enter aie2_sched_job_timedout() concurrently, both
check the timeout detection state. The first scheduler thread observes
tdr_status as SIGNALED and updates it to WAIT. The second thread then
observes the updated state instead of the original SIGNALED state, which
may cause the command timeout to be handled incorrectly.
Replace tdr_status with last_signal_ts, which records the timestamp of
the last driver signal. Timeout detection now only reads
last_signal_ts and never modifies it, allowing multiple serialized
detect() calls under dev_lock to evaluate the same signal timestamp
independently. If there is not any new job scheduled or completed
within tdr_timeout_ms, the command will timeout.
Fixes: 9022f010977f ("accel/amdxdna: Check for device hang on job timeout")
Signed-off-by: Wendy Liang <wendy.liang@amd.com>
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260718083409.1825940-1-lizhi.hou@amd.com
|
|
Add debugfs register access to the ads112c14 driver. This is a complex
chip and being able to poke registers is useful for debugging and
diagnostic/calibration purposes.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Add support for parsing devicetree properties for measurement channels
and doing direct reads on these.
There are quite a lot of conditions that have to be met for each
measurement to be made, so quite a bit of state and algorithms are
required to handle it.
Channels are created dynamically since the number of possibilities is
unreasonably large.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Implement support for the programmable gain amplifier on the internal
short SYS_MON channel. This channel is used for calibration, so it is
useful to be able to set the PGA to the same gain as the external
channels. The gain setting is implemented via the `_scale` attribute.
In the future, we may want to support different reference voltages for
this channel, so the scale_available table is populated during probe
rather than being a static table.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.
This first step is adding a very basic driver that only supports power
on/reset and reading the system monitor channels.
ADS112C14_SYS_MON_CHANNEL_SHORT is the last channel rather than being in
logical order by address to keep the voltage channels together and in
case we find we need to add variants of this channel with different
voltage reference later.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Babanpreet Singh <bbnpreetsingh@gmail.com> says:
Two small cleanups for the Axiado SPI driver, both defects present
since the driver was added in e75a6b00ad79 ("spi: axiado: Add driver
for Axiado SPI DB controller").
Patch 1 addresses the coccinelle cond_no_effect warning reported by
the kernel test robot on 2026-07-12 [1]: the RX-only/full-duplex
else-if arm and the trailing else arm in ax_transfer_one() have
identical bodies, so the second condition has no effect. The arms are
merged; no functional change (on x86_64/gcc 14, only
ax_transfer_one()'s object code changes, dropping the dead condition
evaluation).
Patch 2 fixes the kernel-doc comments in the driver: a copy-pasted
function name on ax_spi_get_rx_byte_for_irq(), a /** block with no
identifier line on ax_spi_process_rx_and_finalize(), and stale/missing
member documentation on struct ax_spi. This silences the driver's two
W=1 kernel-doc warnings plus five more visible when kernel-doc is run
on the header directly.
Both patches are against spi/for-next; they are independent of each
other except for touching the same file.
[1] https://lore.kernel.org/r/202607121827.djB0zLAj-lkp@intel.com/
Link: https://patch.msgid.link/20260713060807.7-1-bbnpreetsingh@gmail.com
|
|
Running kernel-doc -Wall on the driver reports 7 warnings, all present
since the driver was added in commit e75a6b00ad79 ("spi: axiado: Add
driver for Axiado SPI DB controller"). Two are in spi-axiado.c and
also show up in W=1 builds of drivers/spi:
Warning: drivers/spi/spi-axiado.c:226 expecting prototype for
ax_spi_get_rx_byte(). Prototype was for ax_spi_get_rx_byte_for_irq()
instead
Warning: drivers/spi/spi-axiado.c:248 This comment starts with
'/**', but isn't a kernel-doc comment. Refer to
Documentation/doc-guide/kernel-doc.rst
The other five are for struct ax_spi in spi-axiado.h, seen when
kernel-doc is invoked on the header directly (headers are not scanned
by the build-time kernel-doc checks):
Warning: drivers/spi/spi-axiado.h:130 Excess struct member 'rxbuf'
description in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 Excess struct member 'txbuf'
description in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 struct member 'clk_rate' not
described in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 struct member 'rx_buf' not
described in 'ax_spi'
Warning: drivers/spi/spi-axiado.h:130 struct member 'tx_buf' not
described in 'ax_spi'
Fix the three underlying defects:
- The comment on ax_spi_get_rx_byte_for_irq() carries the name of
ax_spi_get_rx_byte(), from which it was evidently copied when the
IRQ variant was split out; fix the function name.
- The comment on ax_spi_process_rx_and_finalize() is opened with the
kernel-doc /** marker but has no identifier line; turn it into
proper kernel-doc (identifier line, @ctlr, Return:) since it
already describes the behavior and the return value.
- The struct ax_spi comment documents @txbuf and @rxbuf while the
members are named tx_buf and rx_buf, and does not document
clk_rate; fix the member names and describe clk_rate.
No functional change.
Assisted-by: Claude:claude-fable-5 [kernel-doc]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Acked-By: Tzu-Hao Wei <twei@axiado.com>
Link: https://patch.msgid.link/20260713060807.7-3-bbnpreetsingh@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The else-if arm taken for RX-only and full-duplex transfers and the
trailing else arm in the RX bookkeeping setup of ax_transfer_one()
have identical bodies, so the second condition has no effect:
drivers/spi/spi-axiado.c:433:8-10: WARNING: possible condition with
no effect (if == else)
The trailing else arm (neither TX nor RX buffer) is also unreachable:
the SPI core only calls the ->transfer_one() callback for transfers
that carry at least one buffer, see spi_transfer_one_message().
Merge the two arms into a single else branch and fold their comments.
No functional change. The redundant condition has been present since
the driver was added in commit e75a6b00ad79 ("spi: axiado: Add driver
for Axiado SPI DB controller").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202607121827.djB0zLAj-lkp@intel.com/
Assisted-by: Claude:claude-fable-5 [coccinelle]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Link: https://patch.msgid.link/20260713060807.7-2-bbnpreetsingh@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the kunit module for platform devices with test cases verifying
that the same software node can be added to platform devices repeatedly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-5-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
With no drivers that manually assign software nodes to platform devices
created with platform_device_alloc(), we can now unify the release path
and remove platform_device_release_full().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-4-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This driver intentionally uses the fine-grained approach to creating
platform devices. It assigns a software node as the primary firmware
node of the device it creates. Ahead of improving the reference counting
of platform device software nodes, switch to using
device_create_managed_software_node(). This way, we create a dynamic
software node whose life-time is tied to the device to which it's
assigned.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-3-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Creating a software node for a given set of properties and adding it to
a platform device can be achieved with a single call to
platform_device_register_full(). There's nothing in this driver that
suggests using the more fine-grained interfaces was intentional so
switch to using the high-level helper.
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-2-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Calling platform_device_set_fwnode() (and by extension:
platform_device_set_of_node()) of platform_device_set_of_node_from_dev()
for a dynamically allocated platform device whose primary firmware node
is already assigned and is a software node leads to a resource leak as we
never perform the corresponding call to software_node_notify_remove(). As
there are currently no users for this special case - just disallow it and
warn loudly if it ever happens.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-1-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
