| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[Why/How]
The final DP LT failure meant to be logged as DC warning is skipped due
to a break statement above. Move logging up to make sure we don't miss
LT fail events.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Pipe_ctx shouldn't be passed as block sequence block parameter.
[how]
Adjust arguments for set_output_transfer_func and implementations.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Pipe_ctx shouldn't be passed as block sequence block parameter.
[how]
- Adjust program_gamut_remap_params struct.
- Adjust program_gamut_remap interface and implementations.
- Adjust program_gamut_remap callsites to match new signature.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
CONFIG_DRM_AMD_DC_DCN4_2 were readded to DAL by mistake resulting
in parts of dcn42 3dlut code not being compiled.
[how]
Remove readded CONFIG_DRM_AMD_DC_DCN4_2 guards.
Reviewed-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add a KUnit test for dm_dmub_get_vbios_bounding_box() covering the
default IP-version path that returns NULL without allocating GPU memory
or issuing GPINT commands.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for the synchronous DMUB command helpers:
dm_execute_dmub_cmd(), amdgpu_dm_process_dmub_aux_transfer_sync(), and
amdgpu_dm_process_dmub_set_config_sync(). Cover command submission
without a DC DMUB service, AUX engine-acquire failure, protocol-error
propagation, the bounded reply-data copy, the zero-length reply branch,
and the SET_CONFIG completed-with-unknown-error path.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for the DMUB fused IO helpers: the
dm_dmub_aux_fused_io_callback() NULL-argument guard and the
abort_fused_io() no-DMUB-service path.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Extend KUnit coverage for dm_dmub_hw_resume() using the fake-DMUB
fixtures. New cases cover the already-initialized wait path, the full
reinitialization path, a failed init-state query, and an auto-load
timeout, none of which require real hardware.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for dm_dmub_hw_init() beyond the existing
early-return cases. Introduce reusable fake-DMUB fixtures (fake
dmub_srv/firmware, DMCU/ABM stubs, and adev builders) so the init path
runs without real register access, TTM allocation, or firmware loading.
New cases cover the fake-DMUB success path, unsupported hardware, BSS
data copy, hardware-init failure, auto-load timeout, the APU/DPIA DCN3.5
params, the DCN3.1.x sanity-check ranges, and DMCU/ABM initialization.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some HDMI sinks need additional GCP packets to properly process the
mute state before the timing generator is disabled, especially after
link re-establishment with HDMI 2.0 scrambling enabled. Waiting for
only 2 frames is insufficient for certain monitor firmware, resulting
in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames
to ensure the sink receives enough GCP packets.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Assisted-by: Cursor:Claude-Opus-4.6
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Adds required structures to configure MCIF ARB for DWB.
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add fields that can used for writeback watermarks and latency margin
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Was incorrectly using stream index to index pipes, when should have
been using callback to get otg master pipe for stream.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allocate DRM PASIDs with fpriv and resolve VM lookup users through:
PASID -> fpriv -> VM
This preserves the root BO reference and revalidation flow in
amdgpu_vm_lock_by_pasid().
The obsolete per-device vm_manager.pasids mapping is removed by the
following patch in this series.
v6:
- Allocate and publish the DRM PASID after amdgpu_vm_init() completes.
- Assign the allocated PASID to vm->pasid in the DRM open path.
- Unpublish PASID ownership before tearing down the VM in both the
open-failure and normal file-close paths.
v5:
- Delay DRM PASID allocation until after amdgpu_vm_init() completes.
v4:
- Allocate DRM PASIDs with fpriv directly.
- Squash ownership registration and PASID lookup conversion.
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMDGPU already has a global PASID xarray used for PASID allocation.
Allow amdgpu_pasid_alloc() to optionally store the owning DRM
file-private object directly.
Initial callers pass NULL. A later patch in this series passes the DRM
file-private object for DRM PASIDs.
This prepares for using:
PASID -> fpriv -> VM
instead of:
PASID -> VM
Clear the stored owner from amdgpu_pasid_free_delayed() before waiting
for outstanding fences so PASID lookups cannot observe a stale fpriv
while the PASID itself is pending delayed release.
v6:
- Correct the PASID allocator kernel-doc to refer to the XArray cyclic
allocator.
- Document that PASID owner lookup may return NULL and that the returned
fpriv remains valid only while the PASID lock is held.
- No code changes. Retain Christian's Reviewed-by tag.
v5:
- Store NULL instead of xa_mk_value(0) for ownerless PASIDs.
- Simplify owner clearing by unconditionally storing NULL.
v4:
- Add fpriv as an optional parameter to amdgpu_pasid_alloc().
- Drop separate amdgpu_pasid_set_fpriv()/clear_fpriv() helpers.
- Clear PASID owner from amdgpu_pasid_free_delayed().
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add debug mask to disable kernel logs of RAS correctable errors,
including both ACA and CE error counter kernel messages.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There's no need to crash the kernel for this case.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
On DCN42B the SMU reports its DpmClocks table in a different
layout than DCN42, with extra clock domains. The clk_mgr was
parsing it with the DCN42 layout.
[How]
Add a DCN42B DpmClocks struct and a dcn42b_get_smu_clocks() that
allocates and parses the DCN42B layout, reusing the shared dcn42
helpers so DCN42 is untouched. Populate DCF, SOC, DISP, DPP and
FCLK levels and the memory pstate table.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM
reservation fences via amdgpu_sync_resv() before checking whether vm->freed
has anything to clear. Return early when the list is empty to skip this
overhead on a hot path (every GEM close and command submission).
Signed-off-by: Bob Zhou <bobzhou2@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for the SG Micro SGM41542 charger/boost converter.
Driver was adapted from Rockchip BSP driver [1] and confirmed
with vendor datasheet [2].
[1] https://github.com/rockchip-linux/kernel/blob/develop-6.6/drivers/power/supply/sgm41542_charger.c
[2] https://www.sg-micro.de/rect/assets/1e8de70b-657e-4156-be68-a64fdbe8e418/SGM41541_SGM41542.pdf
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260728203832.166402-3-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add trace event definitions for the Qualcomm GENI (Generic Interface)
I2C driver. These trace events enable runtime debugging and performance
analysis of I2C operations.
The trace events capture I2C clock configuration, interrupt status and
error code and message.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260703-add-tracepoints-for-qcom-geni-i2c-v2-2-e8bf8b178290@oss.qualcomm.com
|
|
The QUP I2C driver treats the core and iface clocks as required
resources, but qup_i2c_enable_clocks() ignores clk_prepare_enable()
failures. Probe can then continue to register the I2C adapter, and
runtime/system resume can return success, even when a required clock
transition failed.
Make the helper return an error, unwind a partially enabled clock, and
propagate failures from probe and resume paths.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260624055237.29977-1-pengpeng@iscas.ac.cn
|
|
cci_resume() unconditionally calls cci_resume_runtime() regardless of
the runtime PM state.
If the device is already runtime-suspended before system suspend,
the clock is re-enabled while runtime_status remains RPM_SUSPENDED.
As a result, pm_request_autosuspend() does not arm the timer,
leaving the clock permanently enabled.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260625-cci-v1-1-a100cda673ce@oss.qualcomm.com
|
|
In i2c_imx_unreg_slave(), the slave pointer is set to NULL after
disabling interrupts. However, a pending interrupt might already
have started the hrtimer (i2c_imx_slave_timeout) before the pointer
was cleared. If the hrtimer fires after i2c_imx->slave is set to
NULL, the timer callback i2c_imx_slave_finish_op() will call
i2c_imx_slave_event() with a NULL slave pointer, which results in a
use-after-free / NULL pointer dereference.
Fix by canceling the hrtimer and waiting for it to complete after
disabling interrupts, before clearing the slave pointer.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Liem <liem16213@gmail.com>
Cc: <stable@vger.kernel.org> # v5.11+
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260629023829.152651-3-liem16213@gmail.com
|
|
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Liem <liem16213@gmail.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260629023829.152651-2-liem16213@gmail.com
|
|
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err_probe() calls.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_pci_configure_admin_queue() enables the controller and then requests
the admin queue interrupt. If queue_request_irq() fails it returns without
disabling the controller, and no caller compensates: nvme_pci_enable() only
frees the IRQ vectors and calls pci_disable_device(), after which
nvme_dev_disable() treats the controller as dead and skips nvme_disable_ctrl().
The controller is left enabled (CC.EN set) on this error path.
Disable it in the failure path, while the PCI device is still enabled so the
CC.EN clear handshake completes.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: b60503ba432b ("NVMe: New driver")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Fix ACPI _DSM function index and bitmask usage for Dell DW5826e
* tag 'platform-drivers-x86-v7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: dell-dw5826e: fix ACPI _DSM function index and bitmask usage
|
|
If a transaction times out, the START_BUSY signal can stay up, and
subsequent transactaction attempts will fail as the bus is still
considered busy.
I can easily trigger this by attempting to read from an address with no
device, e.g. when running i2cdetect. After the first read times out, all
subsequent read attempts return busy.
To get to a working state again, the controller needs to be reset to
clear the START_BUSY signal. So check for START_BUSY still asserted on a
timeout, and do reset in case it is,
This is also done by the original non-upstream iproc-smbus driver
implementation [1].
Works around situations like:
bcm-iproc-2c 1803b000.i2c: transaction timed out
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
...
where the bus never recovers after a timeout.
[1] https://github.com/opencomputeproject/onie/blob/master/patches/kernel/3.2.69/driver-iproc-smbus.patch
Fixes: e6e5dd3566e0 ("i2c: iproc: Add Broadcom iProc I2C Driver")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Cc: <stable@vger.kernel.org> # v4.0+
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260717085507.34209-1-jonas.gorski@bisdn.de
|
|
If btusb_qca_send_vendor_req() gets a "short" read from a device, it
will accidentally treat that as a "real" read and populate the returned
value with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btusb_qca_send_vendor_req() is called.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If btmtk_usb_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_reg_read() is called (it's really just
btmtk_usb_id_get() that calls btmtk_usb_reg_read(), so fix up those
return sites.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_uhw_reg_read() is called.
Note, one caller of btmtk_usb_uhw_reg_read() does not check the return
value, but as we pre-initialize the return value as 0, an incorrect read
will not do anything wrong.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access.
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When the PLL rates table was first committed for RK3588 (and later reused
for RK3576), the fractional PLL coefficient was defined as an unsigned
value, while the TRM clearly states that it is a two's complement 16-bit
value.
Treating the fractional PLL coefficient as unsigned in rate recalculation
results in a kernel-visible rate which deviates from what the hardware
actually generates by Fin / (p * 2^s), or 2 MHz for the two affected table
entries.
Rockchip's downstream kernel later revised the fractional PLL code [1] to
account for the two's complement nature of the coefficient, but that
change wasn't upstreamed.
Change the PLL table definition to use two's complement for the
fractional coefficient and update its users accordingly.
Note that a negative fractional coefficient is meant to be subtracted from
the next larger integer multiplier, so the m values in the table are
also adjusted accordingly for the two negative-k entries.
Rockchip's downstream commit introducing the two's complement logic for k
also does unrelated tweaks to the PLL parameters which are not explained
by the switch to the two's complement, so they are not replicated here.
If any of the parameters prove to need further tweaks (e.g. for precision
or jitter) that would better be done in targeted follow-up commits.
Fractional PLL rates don't seem to be used by any current mainline
consumers, so this is purely a correctness fix. It will also be important
to properly support DisplayPort output going forward, as the video output
controller derives its pixel clock from system PLLs with no dedicated PHY
PLL option for DP unlike HDMI, and some display modes are only achievable
using fractional PLL rates.
Link: https://github.com/flipperdevices/rockchip-linux/commit/7a72bc05dcc3a51e85ae531749e6270bf9b9212d [1]
Fixes: f1c506d152ff ("clk: rockchip: add clock controller for the RK3588")
Fixes: cc40f5baa91b ("clk: rockchip: Add clock controller for the RK3576")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260723-rk3588-fracpll-v2-2-3adfb9dda235@flipper.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to the TRM, the fractional PLL coefficient should be divided by
65536 rather than 65535 to obtain the output rate.
Fix the denominator and add a comment with the TRM provided clock formulae
for future reference.
See RK3576 TRM Part 1 V1.2 section 2.13.1.4 Setting Guide on P, M, S and K
or equivalently RK3588 TRM part 1 V1.0 section 2.17.1.4 Setting Guide on P,
M, S and K.
Fractional PLL rates don't seem to be used by any current mainline
consumers, so this is purely a correctness fix. It will also be important
to properly support DisplayPort output going forward, as the video output
controller derives its pixel clock from system PLLs with no dedicated PHY
PLL option for DP unlike HDMI, and some display modes are only achievable
with fractional PLL rates.
Fixes: 8f6594494b1c ("clk: rockchip: add pll type for RK3588")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20260723-rk3588-fracpll-v2-1-3adfb9dda235@flipper.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The PM8350B has only one LDO, which gets its power from a dedicated input.
Add support for it.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260723-pm8350b-ldo-v1-2-42b5428a0d3f@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the PWM mode configurable from devicetree. Some boards require forced
PWM mode to keep the supply ripple within acceptable limits under light
load conditions
Support is restricted to Silergy manufacturer as it is the only one
currently tested.
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Link: https://patch.msgid.link/20260723094001.120264-5-victor.krawiec@arturia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the e1000_probe() path, e1000_sw_init() allocates adapter->tx_ring and
adapter->rx_ring. If the subsequent CE4100-specific MDIO BAR mapping
fails, the error handling jumps past the ring cleanup code, leaking both
allocations.
Fix this leak by moving the err_mdio_ioremap label above the ring
deallocation logic. This guarantees the proper release of these resources
and prevents the memory leak.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
CE4100 reference platform to test with, no runtime testing was able to
be performed.
Fixes: 5377a4160bb65 ("e1000: Add support for the CE4100 reference platform")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed.
Fixes: c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-4-7-opus
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When an AF_XDP zero-copy application is killed abruptly, the XSK pool is
torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the
full budget on every poll, so napi_complete_done() never clears
NAPI_STATE_SCHED.
igc_down() calls napi_synchronize() before napi_disable(), so it spins
forever waiting for that bit and the interface never goes down. Drop the
napi_synchronize() and let napi_disable() do the job -- it sets
NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it
ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after
polling has stopped, matching the recent igb fix b1e067240379.
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During reset recovery, the admin queue returns EBUSY which is expected
behavior. However, the DPLL subsystem was logging these as errors and
incrementing the error counter, potentially leading to unnecessary
warnings and even disabling the DPLL periodic worker if the threshold
was reached.
Suppress error logging and error counter increments when the admin
queue returns EBUSY, as this is expected during reset recovery and
not a real failure condition.
test case:
- ethtool --reset eth3 irq-shared dma-shared filter-shared offload-shared
mac-shared phy-shared ram-shared
- observe if dmesg EBUSY errors are gone
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_lbtest_prepare_rings() frees Rx rings only when
ice_vsi_start_all_rx_rings() fails. If ice_vsi_setup_rx_rings() fails
after allocating some descriptors, or if ice_vsi_cfg_lan() fails after
the Rx rings were prepared, the function reaches the Tx cleanup path
without releasing the initialized Rx resources.
Fix this by adding separate unwind paths for Rx setup failure and LAN
configuration failure. The Rx setup failure path releases the partially
prepared Rx rings before freeing Tx rings, while later failures first
undo the LAN Tx configuration and then release the Rx rings in reverse
setup order.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
Intel E800 Series adapter available to run the ethtool offline loopback
selftest, no runtime testing was able to be performed.
Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a virtual function sends an IRQ map command, the PF will set up
interrupts according to that request. However, because these interrupts are
never reset, the next time Virtual Function initializes, the interrupts are
still enabled for a given VF, which leads to performance degradation in
certain cases due to interrupts being unexpectedly enabled and thus causing
interrupt floods.
Cc: stable@vger.kernel.org
Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_resume() schedules an asynchronous PF reset and returns
immediately. The reset runs later in ice_service_task(). If
userspace tries to bring up the net device before the reset
finishes, ice_open() fails with -EBUSY:
ice_resume()
ice_schedule_reset() # sets ICE_PFR_REQ, returns
...
ice_open()
ice_is_reset_in_progress() # ICE_PFR_REQ still set, -EBUSY
...
ice_service_task()
ice_do_reset()
ice_rebuild() # clears ICE_PFR_REQ, too late
Reproduced on E800 series NICs during suspend/resume with irdma
enabled, where the aux device probe widens the race window.
ice 0000:81:00.0: can't open net device while reset is in progress
Add a best-effort wait (10s timeout, matching ice_devlink_info_get())
for the reset to complete before returning from ice_resume(). In
practice the reset completes in ~300ms.
Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL")
Cc: stable@vger.kernel.org
Reviewed-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf_mb_intr_req_irq() allocates the mailbox IRQ name before calling
request_irq(). On success, the name is released later through
kfree(free_irq()), but request_irq() failure returns without freeing it.
Free the allocated name on the request_irq() failure path.
Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Set the TxQ ring count minimum to 128 descriptors. Any lower than this,
and the queue will stall and trigger Tx timeouts in flow based
scheduling mode. This is because next_to_clean might never be updated.
In flow based scheduling mode, next_to_clean is only updated after a
descriptor completion is processed, i.e. after the RE bit is set in the
last descriptor of a Tx packet. This will never happen with a ring size
of 64 and an IDPF_TX_SPLITQ_RE_MIN_GAP of 64. No matter what the value
of last_re is initialized/set to, the calculated gap will be at most 63
and never trigger the RE bit.
Even a ring size of 96 does not solve this. Because of how infrequent
next_to_clean is updated and how small the ring is, IDPF_DESC_UNUSED
will be much smaller on average. This increases the chance the queue
will be stopped because a multi-descriptor packet, e.g. a large LSO
packet, does not see enough resources on the ring. In this case, the
queue will trigger the stop logic. The queue permanently stalls because
there is no chance for a descriptor completion to update next_to_clean
since it is dependent on a packet being sent.
Fixes: 5f417d551324 ("idpf: replace flow scheduling buffer ring with buffer pool")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
driver
The ACPI driver currently prepares the per-socket metric table only
on HSMP_PROTO_VER6. With protocol version 7 in use on Family 1Ah
Model 50h-5Fh, userspace cannot reach the larger ~13 KB table:
hsmp_get_tbl_dram_base() is skipped, sock->metric_tbl_addr stays
NULL, and the ioctl added earlier in this series has nothing to read.
Widen the proto_ver gate in init_acpi() from '== HSMP_PROTO_VER6'
to '>= HSMP_PROTO_VER6' so the DRAM region is mapped and
sock->metric_tbl_size is populated on protocol version 7 (and any
future compatible version), making the ioctl path functional.
hsmp_metric_tbl_acpi_read() now returns -EOPNOTSUPP whenever the
running protocol version is not VER6, because the sysfs binary
attribute cannot carry a table larger than PAGE_SIZE. Version 7
userspace gets a clear, actionable error and a documented pointer to
HSMP_IOCTL_GET_TELEMETRY_DATA; version 6 userspace sees no change.
The non-ACPI plat.c path is intentionally left untouched: it covers
Family 1Ah Model 0h-Fh hardware fixed at protocol version 6, where
the existing metrics_bin remains the supported interface.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-6-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The metric table needs to be delivered to userspace as a single
atomic snapshot, but the current sysfs metrics_bin path is a file
read: userspace can read it in chunks and observe a torn snapshot
if an SMU refresh happens between read() calls. The same path is
also bounded by PAGE_SIZE, so the ~13 KB table used by HSMP protocol
version 7 on Family 1Ah Model 50h-5Fh cannot be returned at all,
regardless of how userspace reads it. Rather than extend sysfs to
lift both restrictions, expose the metric table through the
existing HSMP character device using a new ioctl that always copies
the table in one shot.
Add struct hsmp_telemetry_data and HSMP_IOCTL_GET_TELEMETRY_DATA
to the UAPI header. Under the surrounding #pragma pack(4), placing
the __u64 user pointer first gives a tight 16-byte layout that is
identical for 32- and 64-bit callers, and the trailing __u16
reserved field is rejected with -EINVAL if non-zero so future
kernels can repurpose it without breaking already-deployed
userspace. The command is encoded with _IOW because the kernel only
reads the request struct; the snapshot travels through the user
pointer it carries.
The requested size may be anything from one byte up to the size
firmware reported for that socket's table. A short request returns
the leading bytes of the snapshot, so userspace built against an
older table layout keeps working on firmware that grew the table,
mirroring the relaxed response_sz rule applied to HSMP messages
earlier in this series. A request larger than the firmware table is
rejected with -EINVAL rather than short-written, so a caller can
never mistake a partial copy for a full one.
Dispatch hsmp_ioctl() on the ioctl command: the existing message
handler is factored out as hsmp_ioctl_msg() for HSMP_IOCTL_CMD, and
HSMP_IOCTL_GET_TELEMETRY_DATA goes to a new
hsmp_ioctl_get_telemetry() helper.
/dev/hsmp is a singleton character device that outlives an
individual socket unbind, so an ioctl issued on an already-open fd
can run concurrently with socket teardown. hsmp_sock_rwsem is the
driver's contract for that: the data plane takes it for read, and
probe and remove take it for write to drain the data plane before
freeing the socket array, unmapping the metric tables and
destroying the per-socket mutexes. hsmp_ioctl_get_telemetry() takes
it for read across the socket lookup, the checks on that socket's
metric-table state and the table read itself, so none of that state
can be torn down underneath it. Without this the handler would
sleep in its kvmalloc() holding no lock at all, and could resume
with a freed socket, locking a destroyed mutex and reading from an
unmapped iomem region.
The lock is dropped before the copy_to_user(), because faulting in
the destination can block indefinitely on a userfaultfd-backed
buffer and would otherwise leave a socket unbind waiting for the
write lock.
Since hsmp_metric_tbl_read() reached the mailbox through
hsmp_send_message(), which takes hsmp_sock_rwsem itself, calling it
with the lock already held would recursively take the read side and
can deadlock against a queued writer. Split out
hsmp_metric_tbl_read_locked(), which asserts the lock and uses
hsmp_send_message_locked(), and leave hsmp_metric_tbl_read() as a
wrapper that takes the read lock for the sysfs callers. This also
brings the whole fill-and-copy under the rwsem for those callers,
where the memcpy_fromio() previously ran outside it, and makes the
lock order uniformly hsmp_sock_rwsem -> metric_read_lock ->
hsmp_sem.
The user-controlled socket index in HSMP_IOCTL_GET_TELEMETRY_DATA is
clamped with array_index_nospec() before indexing hsmp_pdev.sock[],
mitigating Spectre v1 (CVE-2017-5753). Include linux/nospec.h, which
the file relied on getting transitively.
Co-developed-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muthusamy Ramalingam <muthusamy.ramalingam@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Link: https://patch.msgid.link/20260727141542.3370108-5-muralidhara.mk@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
