| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When waiting for a sub-module to register, we return a bare
-EPROBE_DEFER that ends up showing the end user:
platform arm-cs-arch-pmu.1: deferred probe pending (no reason)
wherein it's not necessarily clear that they might need to take some
action to ensure the appropriate module is available to load. Let's use
dev_err_probe() here so we can show exactly what we're waiting for.
Similarly, in the case where something's gone horribly wrong with an
already-registered module, we can use dev_WARN() to standardise the
device/driver attribution rather than just open-coding "arm_cspmu".
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On ACPI systems, it has not actually been possible for userspace to
reliably tell which PMU corresponds to which APMT entry for types
other than "ACPI device" - the evidence trail only leads from the
arbitrarily-numbered PMU device to its arbitrarily-numbered parent
platform device that has no distinguishing features either.
While we've now improved the platform device creation to associate the
actual APMT unique ID, we may as well also tweak the PMU devices to
substitute the arbitrary number with a different arbitrary number that
might be more directly meaningful based on the APMT definitions.
We don't have an equivalent for Devicetree, but in that case the
platform devices are at least identifiable via their sysfs-visible
of_node.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
[will: Remove unneeded semicolon reported by coccinelle]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The APMT node format includes a unique identifier, so we can use this as
the platform device ID to give userspace stable and identifiable device
names, rather than auto numbering dependent on how the table is parsed.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement CRB filtering per CXL 4.0 8.2.7.2.2, and extend the
current filtering support beyond HDM. CRB filtering is only
permitted for the DDR Interface, Queue Occupancy, Queue Residency
and Retry event groups (CXL 4.0 Table 13-5), and only when counting
a single event (a single mask bit). Because these group IDs are
scoped by the CXL vendor ID, events from other vendors are also
rejected. For example, to count DDR activates on channel 2 only:
perf stat -a -e cxl_pmu_mem0.0/ddr_act,crb_filter_en=1,crb=0x02FFFFFF/
Placing the 32-bit CRB value at config2:32-63 leaves the
existing HDM value at config2:0-15 untouched and avoids needing
a new config3.
Signed-off-by: Harshal Thakkar <harshal.t@samsung.com>
[davidlohr: multiple fixes]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for CXL 4.0 events that are exposed by the CPMU hardware
but not present in the driver. Such events are defined in Table 13-5
of the spec.
Signed-off-by: Harshal Thakkar <harshal.t@samsung.com>
[davidlohr: add missing throttle and queue occupancy events]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The HDM decoder filter configuration register is 32 bits wide, but the
driver programs it with a 64-bit writeq(). The filter value never
exceeds 32 bits, so the upper half of the write is always zero and
lands in the adjacent Filter ID 1 (Channel/Rank/Bank) configuration
register at offset+4.
Fixes: 5d7107c72796 ("perf: CXL Performance Monitoring Unit driver")
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
An SMMU implementing SMMU_IDR5.DS extends the range invalidation commands:
the SCALE field grows a 6th bit, raising its maximum value from 31 to 39,
and TTL == 0b01 becomes a valid level hint for a 16KB translation granule.
Add a new ARM_SMMU_FEAT_DS feature detecting the DS bit, and widen the
CMDQ_TLBI_0_SCALE field to its architectural 6 bits. Mask the scale value
explicitly in arm_smmu_cmdq_batch_add_range(), so the range invalidation
path emits the same commands as before, keeping the pre-existing 5-bit
truncation of a scale above 31.
Also list DS as a valid IDR5 field in the iommu_hw_info_arm_smmuv3 kdoc:
iommufd has always reported the raw IDR5 register, so a VMM may conclude
from that bit alone that it can expose DS to its guest.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Assisted-by: Claude:claude-fable-5
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arm_smmu_write_reg_sync() helper is currently implemented using
readl_relaxed_poll_timeout() (that relies on usleep_range() internally)
which becomes a critical issue when used in the gerror irq handler.
If the SMMU hits a gerror and enters Service Failure Mode
(GERROR_SFM_ERR), the gerror handler calls arm_smmu_device_disable() in
hard-irq context. This becomes a problem as arm_smmu_device_disable()
inevitably calls arm_smmu_write_reg_sync() which might attempt to sleep
inside a hard-irq context.
Fix this by converting the arm_smmu_write_reg_sync to use the
readl_relaxed_poll_timeout_atomic() polling helper.
(Discovered while running Sashiko locally on another patch series).
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since table access flags cannot be software-managed, if process
pagetables are using HAFT then SVA must require the SMMU to support and
enable it too, otherwise page aging is liable to get out of whack.
For unbinding, we can't disable HAFT atomically with HA as might be
desired, but luckily we can get away with just not disabling HA either.
Cc: stable@vger.kernel.org
Fixes: 62df5870ebf7 ("arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
T241-MPAM-6 causes all MBWU counter formats to count 64-byte
requests instead of bytes. Commit dc48eb1ff27c excluded the 63-bit
MSMON_MBWU_LWD format while scaling the shorter counters. Systems
selecting the preferred 63-bit counter consequently report bandwidth
values that are 64 times too small.
Apply the scale to both the sampled value and overflow correction for
the 63-bit format. Unsigned arithmetic retains modulo-u64 behavior
when the scaled counter range exceeds u64.
Fixes: dc48eb1ff27c ("arm_mpam: Add workaround for T241-MPAM-6")
Link: https://lore.kernel.org/lkml/20240816131432.993859-1-sdonthineni@nvidia.com/
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When used in 'mbm_event' mode, ABMC emulation, resctrl uses arch hooks to
read and reset the memory bandwidth utilization (MBWU) counters.
Add these.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ABMC, mbm_event mode, has a helper resctrl_arch_config_cntr() for changing
the mapping between 'cntr_id' and a CLOSID/RMID pair.
Add the helper.
For MPAM this is done by updating the mon->mbwu_idx_to_mon[] array, and as
usual CDP means it needs doing in three different ways.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
MPAM is able to emulate ABMC, i.e. mbm_event mode, by making memory
bandwidth monitors assignable. Rather than supporting the 'default'
mbm_assign_mode always use 'mbm_event' mode even if there are sufficient
memory bandwidth monitors. The per monitor event configuration is only
provided by resctrl when in 'mbm_event' mode and so only allowing
'mbm_event' mode will make it easier to support per-monitor event
configuration for MPAM. For the moment, the only event supported is
mbm_total_event with no bandwidth type configuration. The 'mbm_assign_mode'
file will still show 'default' when there is no support for memory
bandwidth monitoring.
The monitors need to be allocated from the driver, and mapped to whichever
control/monitor group resctrl wants to use them with.
Add a second array to hold the monitor values indexed by resctrl's cntr_id.
When CDP is in use, two monitors are needed so the available number of
counters halves. Platforms with one monitor will have zero monitors when
CDP is in use.
Co-developed-by: James Morse <james.morse@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
resctrl has two types of bandwidth counters, NUMA-local and global. MPAM
can only count globally; either using MSC at the L3 cache or in the memory
controllers. When global and local equate to the same thing continue just
to call it global.
Pick the corresponding MPAM classes to back the MBM counters. As resctrl
requires all monitors to be at the L3 cache, we can only use the counters
at the memory controllers when they have the same topology as the L3 cache
and the traffic they see if the same. In particular, for the bandwidth
counters at the memory controllers to be exposed to resctrl it is required
there is a single L3 cache and a single NUMA node as otherwise cross NUMA
traffic will be counted at the wrong instance.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A CPU wedged with interrupts masked ignores the stop IPI, and without
pseudo-NMI there is no NMI IPI to escalate to: a reboot proceeds with
the CPU still running, and a kdump misses its registers.
Add a third rung to smp_send_stop(): once the IPI (and pseudo-NMI IPI,
if enabled) rungs have run, signal SDEI event 0 at whatever stayed
online. Firmware delivers it regardless of the target's DAIF, so it
reaches a CPU a plain IPI cannot; the target acks by going offline,
which the caller already polls for.
Fold the stop bookkeeping into one arm64_nmi_cpu_stop(regs,
die_on_crash), shared by the stop IPI handlers, panic_smp_self_stop()
and the SDEI handler, replacing the near-duplicate local_cpu_stop() and
ipi_cpu_crash_stop(). @die_on_crash is the only difference: the IPI
handlers pass true and PSCI CPU_OFF the CPU on a crash stop so a capture
kernel can reclaim it; the SDEI handler and self-stop pass false and
park. The SDEI park is required, not conservative -- its handler runs
inside an SDEI event that is never completed (completing it resumes the
wedged context), and a CPU_OFF from that unfinished-event context wedges
EL3 on some firmware (left as a follow-up). The dump is unaffected; only
re-onlining the CPU in an SMP capture kernel is lost.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Deliver an NMI-like event to an interrupt-masked arm64 CPU via the
standard SDEI software-signalled event (event 0), without the pseudo-NMI
hot-path cost: register a handler for event 0 and poke a target with
sdei_event_signal(0, mpidr).
First user is arch_trigger_cpumask_backtrace() (sysrq-l, RCU stalls,
hung-task/soft-lockup dumps), which otherwise rides an IPI that can't
reach a masked CPU. Falls back to the IPI path when SDEI is absent; no
watchdog backend yet, so the stock detector is untouched.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add sdei_event_signal(), a thin wrapper over the SDEI_EVENT_SIGNAL call
(DEN0054) that makes the software-signalled event (event 0) pending on a
target PE -- delivered NMI-like even when that PE has interrupts masked.
It takes no locks, so it is safe to call from NMI / crash context.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
invoke_sdei_fn() returns -EIO when no SDEI conduit was probed, and the
core warns ("Failed to create event ...") on any registration that hits
that. An optional consumer that registers an event from an unconditional
initcall would therefore make every boot on a non-SDEI system emit that
warning for what is simply absent firmware.
Expose whether SDEI firmware is present so such a consumer can skip
registration -- and the warning -- when there is nothing to talk to.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.
Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Not handling the return code on drm_encoder_init can lead to silent
failure and/or a drm_encoder_cleanup on a non-initialized encoder.
This patch adds error handling to the drm_encoder_init calls to prevent
that from happening.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the dependency on drm simple helpers from exynos
DRM drivers.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Dropped unnecessary blank line and reorder header definition.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
RTL8922DE is a WiFi 7 chipset, supporting 2x2 2GHz/5GHz/6GHz 4096/1024-QAM
160MHz channels. As STA, AP and P2P modes work well, enable this chipset.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-8-pkshih@realtek.com
|
|
The 9.24.1 coexistence version included firmware 0.35.111.X support for
RTL8922A/D, 0.24.97.X support for RTL8852C, 0.29.133.X support for
RTL8852B chip family.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-7-pkshih@realtek.com
|
|
The old lps_ctrl_scbd logic in _update_bt_scbd() blocked WiFi LPS only
when mode == BTC_WLINK_V0_2G_STA, which created a dead-lock while
WiFi already in LPS suppressed TDD binding so mode was never set to
BTC_WLINK_V0_2G_STA, lps_ctrl_scbd stayed 0, and WiFi remained stuck
in LPS. Port _update_bt_ctrl_lps() from the reference implementation to
check BT profile existence (A2DP, HFP, PAN) for both radios directly,
with out_of_band and freerun guards so LPS is only blocked when WiFi and
Bluetooth actually share a band. Call it from both _update_bt_scbd() and
_update_bt_info() so profile changes reported via either SCBD or BT info
C2H correctly update lps_ctrl_scbd. Also remove the dead
lps_ctrl_scbd_last field.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-6-pkshih@realtek.com
|
|
Logic should only get explicit link_mode only, to cover the old branch
link_mode_v0 using (old branch firmware needed) should do translating
after link_mode is settled. And the coexistence logic has already updated
to new branch style, so the logic should use new link_mode, don't need
to consider link_mode_v0. To prevent unexpected logic bug, refine the
related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-5-pkshih@realtek.com
|
|
When a BT device is disabled, _update_bt_link_cnt() is no longer called
for that device, so its link_weight[] retains stale values from the last
active period. _set_bind_info() then computes a non-zero band score for
the disabled device, which can lead to an incorrect tdd_bind.rf_band
selection and ultimately wrong coexistence policy.
Clear link_weight[] for any disabled BT device at the start of the
_set_bind_info() loop so that stale scores are not carried forward.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-4-pkshih@realtek.com
|
|
The _update_bt_info() function always parsed BT-info for bt0 and used a
single raw_info buffer regardless of which BT device sent the packet or
which RF band it belongs to. This caused two bugs:
1. BT-info packets from bt1 were incorrectly parsed into bt0's state.
2. BT-info packets from 5/6 GHz BT (L1 bit7=1) overwrote the 2.4 GHz
link_info and raw_info, breaking duplicate detection across bands.
Fix by adding the bid parameter to select bt0/bt1, detecting the 5/6 GHz
band flag (L1 bit7) to route packets into link_info_56g with a dedicated
raw_info_56g buffer, and updating the early-return mask to ignore bit7
when checking the length field.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-3-pkshih@realtek.com
|
|
_update_bt_link_cnt() was missing the bt->link_weight[].
Without it, link_weight stays at the initial value of 5
(set on BT re-enable) regardless of the active BT profile.
_set_bind_info() uses link_weight to compute b2g_score/b5g_score, which
determines tdd_bind.rf_band. With a stale weight of 5 (below the active
profile threshold), tdd_bind.rf_band may not reflect the actual RF band,
causing mode_v0 in _run_coex() to remain 0 (BTC_WLINK_NOLINK), which
incorrectly triggers _action_wl_nc() instead of the BT-profile action.
Add the link_weight calculation to _update_bt_link_cnt() using the same
weighting table as Formal (BIS/A2DP-sink: 70, A2DP: 40-60, PAN/active: 30,
no-profile: 5, else: 9) and call _update_bt_link_cnt() from
_update_bt_info() after parsing the profile exist flags, replacing the
open-coded link_cnt increment that omitted le-audio profiles.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-2-pkshih@realtek.com
|
|
Adapt H2C format to fit firmware version after 0.35.113.2, which
only supports active scanning with a provided SSID list.
The wildcard_6ghz field is no longer required for WiFi 7 chips' new
format, but not removed since WiFi 6 still requires it.
Keep original H2C style also to support older firmwares.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729124354.3231368-4-pkshih@realtek.com
|
|
The version check with less than should check for smallest upper-bound
first, or some branch will be unreachable.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729124354.3231368-3-pkshih@realtek.com
|
|
When an AP interface is registered and starts AP, mac80211 calls the
configure_filter() to clear B_AX_A_UC_CAM_MATCH and B_AX_A_BC_CAM_MATCH
so that frames from un-associated stations can be received. However, for
a dedicated AP interface created via iw command, configure_filter() is
only triggered on the initial AP startup. Since the interface remains up
even after hostapd stops, and it isn't triggered again on later restarts.
Additionally, each AP start causes IPS leave, reverting the RX filter to
its default value.
For WiFi 7 chips, the default value is hardcoded in rx_fltr_init_be(),
so the reverted value does not match hal.rx_fltr. Therefore, refine
the behavior of WiFi 7 chips to align with the WiFi 6 implementation.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729124354.3231368-2-pkshih@realtek.com
|
|
Since the hardware rfkill polling was introduced, arm64 platforms can
panic with an asynchronous SError during warm reboot:
SError Interrupt on CPU8, code 0x00000000be000011 -- SError
Workqueue: events_power_efficient rfkill_poll [rfkill]
rtw89_pci_ops_read8+0x94/0x160 [rtw89_pci]
rtw89_core_rfkill_poll+0x50/0x1e0 [rtw89_core]
rtw89_ops_rfkill_poll+0x40/0x68 [rtw89_core]
ieee80211_rfkill_poll+0x3c/0x70 [mac80211]
cfg80211_rfkill_poll+0x40/0x2a0 [cfg80211]
rfkill_poll+0x30/0x88 [rfkill]
Kernel panic - not syncing: Asynchronous SError Interrupt
On the reboot path the kernel only runs device_shutdown(), which calls
each driver's .shutdown callback; .remove is not invoked. The rtw89 PCI
driver had no .shutdown callback, so nothing stopped the rfkill polling
work while the platform was tearing the PCIe link down. Once the link
is gone, the next MMIO read from the poll handler targets a
non-responding device and is reported as a fatal asynchronous SError on
arm64.
Add rtw89_pci_shutdown(), wired to all rtw89 PCI device drivers, which
sets a new RTW89_FLAG_SHUTDOWN flag (mirroring the USB
RTW89_FLAG_UNPLUGGED pattern). When the flag is set,
rtw89_ops_rfkill_poll() returns early, so no MMIO read is issued to the
chip after shutdown begins and the SError no longer occurs.
This does not call the full .remove path from .shutdown, to keep the
shutdown handler minimal and avoid running the non-idempotent teardown
twice.
Fixes: 0b38e6277aed ("wifi: rtw89: add support for hardware rfkill")
Cc: stable@vger.kernel.org
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yuhang.chen <yhchen312@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729014142.2746777-1-yhchen312@gmail.com
|
|
The driver fails to register with error -22 (EINVAL) due to a cfg80211
validation failure in wiphy_verify_iface_combinations().
Commit 5ef0e8e2653b ("wifi: mt76: mt7996: fix iface combination for
different chipsets") added beacon_int_min_gcd to if_comb_global and
if_comb_global_7992, but these combinations include ADHOC (IBSS)
interface type. This violates a cfg80211 rule from commit 56271da29c52
("cfg80211: disallow beacon_int_min_gcd with IBSS") that explicitly
forbids combining ADHOC with beacon_int_min_gcd.
The restriction exists because beacon_int_min_gcd requires static,
predictable beacon intervals to coordinate multiple beaconing interfaces,
but ADHOC interfaces have dynamic beacon intervals that change when
joining different networks, making the GCD constraint unenforceable.
Remove beacon_int_min_gcd from the interface combinations that include
ADHOC because they are not necessary for ADHOC operation. The if_comb
combination (AP/MESH/STA only, without ADHOC) correctly retains
beacon_int_min_gcd for multi-AP coordination.
Fixes: 5ef0e8e2653b ("wifi: mt76: mt7996: fix iface combination for different chipsets")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Tested-by: Alex Gavin <alex.gavin@candelatech.com>
Link: https://patch.msgid.link/20260702104337.679536-1-jtornosm@redhat.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_phy_init() sets NL80211_FEATURE_ACTIVE_MONITOR for every mt76 device,
but mt792x firmware does not honor it: entering active monitor mode stops
RX. Gate the feature behind a new per-phy no_active_monitor flag and set it
for mt792x.
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260722011302.113060-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work,
and cancels the work before bq is freed. The explicit
cancel_delayed_work_sync() in remove() is no longer needed and is dropped.
Found by static analysis.
Fixes: 2219a935963e ("power_supply: Add TI BQ24257 charger driver")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731143554.334179-1-fanwu01@zju.edu.cn
Link: https://patch.msgid.link/20260801051958.354528-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service
comes up, and the worker recovers battmgr through container_of() to issue
firmware requests. The PMIC GLINK client stays on the client list until
its devres release action runs, so a PDR notification can keep queueing
the work, and a pending or running worker can access battmgr after devres
frees it.
Make enable_work device-managed with devm_work_autocancel(), registered
before the PMIC GLINK client is allocated. The devres cleanup then
releases the client first, so no further notification can queue the work,
and cancels the work before battmgr is freed.
This issue was found by an in-house static analysis tool.
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731022006.317192-1-fanwu01@zju.edu.cn
Link: https://patch.msgid.link/20260801051923.354496-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"A set of fixes across several host controller drivers. The largest
part addresses three issues in the i.MX driver, while the remaining
changes fix probe ordering, power management, timeout recovery and
error handling.
amd-mp2:
- unregister callback if adapter registration fails
designware:
- defer probe until child GPIO controllers are bound
imx:
- mark adapter suspended while hardware is powered down
- fix stale slave pointer and shared IRQ registration race
- stop slave timer before clearing slave pointer
iproc:
- reset controller if START_BUSY remains set after timeout
jz4780:
- cache clock rate to avoid clk_get_rate() deadlock
qcom-cci:
- rely on runtime PM helpers for system sleep
spacemit:
- request interrupt after clock initialization"
* tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: qcom-cci: drop custom suspend/resume and rely on runtime PM helpers
i2c: imx: Cancel hrtimer before clearing slave pointer
i2c: imx: Fix slave registration race and error handling
i2c: iproc: reset bus after timeout if START_BUSY is stuck
i2c: imx: mark I2C adapter when hardware is powered down
i2c: designware: defer probe if child GpioInt controllers are not bound
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
i2c: amd-mp2: Unregister callback on adapter add failure
i2c: spacemit: request IRQ after controller initialization
|
|
On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT).
On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to
it are not permitted. ath10k_msa_dump_memory() copies the region with a
plain memcpy(), whose optimized __pi_memcpy_generic implementation issues
wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in
ath10k_snoc_fw_crashed_dump() while collecting the devcoredump:
Unable to handle kernel paging request ... FSC=0x21: alignment fault
pc : __pi_memcpy_generic
lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc]
The Oops both leaves the firmware RAM dump buffer zeroed (no dump is
captured) and crashes the kernel, which in turn breaks modem SSR
recovery.
Use memcpy_fromio(), which only performs accesses that are valid for such
a device-memory mapping. The generic memcpy_fromio() implementation aligns
the source before issuing word-sized reads and stores the destination with
put_unaligned(), so it is also safe for the coherent DMA allocation used on
the non-reserved-memory path. ath11k and ath12k use the same pattern
when copying target memory into crash dumps, so call it unconditionally
here too.
The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is
needed; use __force to keep sparse happy.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1
Fixes: 3f14b73c3843 ("ath10k: Enable MSA region dump support for WCN3990")
Signed-off-by: Linghui Wu <linghui.wu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260727072629.2297208-1-linghui.wu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When UTF monitor is enabled, ath10k forwards WMI events to nl80211
testmode. Non-UTF events can therefore be delivered to userspace and
confuse FTM tools which expect only UTF responses.
Only forward known UTF event IDs from WMI event namespaces that route
events through ath10k_tm_event_wmi(), and drop other WMI events while UTF
monitor is active. READY events are still handled by the normal WMI
receive path.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00093.2-QCAHLSWMTPL-1
Signed-off-by: Linghui Wu <linghui.wu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730023226.707008-1-linghui.wu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When a vif operates with IEEE80211_OFFLOAD_ENCAP_ENABLED,
mac80211 delivers EAPOL frames to ath12k in native-WiFi format.
Unencrypted EAPOL frames used during the initial 4-way
handshake are already handled through the existing
is_diff_encap path. However, EAPOL frames transmitted during
GTK rekeying carry ATH12K_SKB_CIPHER_SET and continue through
the normal native-WiFi transmit path.
Firmware encryption requires RAW frames with cipher-specific IV and ICV
fields correctly provisioned in the skb. Passing encrypted EAPOL frames
in native-WiFi format results in incorrect IV provisioning, leading to
an invalid ICV and frame drop.
Fix this by detecting the EAPOL frames that need HW encryption and
converting them to firmware-encrypted RAW frames before transmission.
Reserve IV space after the MAC header, append ICV space at the tail,
select the appropriate firmware encryption type and request
firmware-side encryption.
Introduce ath12k_dp_tx_crypto_iv_len() and ath12k_dp_tx_crypto_icv_len()
helpers in the TX path to obtain cipher-specific IV and ICV lengths.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01270-QCAHKSWPL_SILICONZ-1
Fixes: d29591d5b52e ("wifi: ath12k: Advertise encapsulation/decapsulation offload support to mac80211")
Signed-off-by: Reshma Immaculate Rajkumar <reshma.rajkumar@oss.qualcomm.com>
Reviewed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729171732.668367-1-reshma.rajkumar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well.
Fixes: 1609b014aa29 ("wifi: mt76: mt7996: Overwrite unspecified link_id in mt7996_tx()")
Link: https://patch.msgid.link/20260801145334.1166751-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_vif_link() indexes mvif->link[] without validating link_id, but
callers pass mvif->deflink_id / msta->deflink_id, which hold
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added.
Since IEEE80211_MLD_MAX_NUM_LINKS is 15, that reads one element past the
end of the array, aliasing mt76_vif_data.offchannel_link.
Reachable via mt7996_set_tsf()/mt7996_offset_tsf() and
mt7996_net_fill_forward_path(). Bounds check link_id and return NULL,
matching mt7996_sta_link() and mt7996_sta_link_protected().
Fixes: a9384b36a42a ("wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO")
Link: https://patch.msgid.link/20260801145334.1166751-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The PS queue filed redirected frames under the TID taken from the TXD,
while mac80211 was told about the TID taken from the QoS header, or TID 0
for anything that is not a QoS data frame. When the two disagree,
mt7603_release_buffered_frames() skips the frame because it does not
match the requested TIDs, so it stays in the PS queue until the station
wakes up. Buffered MMPDUs hit this whenever they were sent on a
non-zero TID.
Use one TID for both.
Link: https://patch.msgid.link/20260801145334.1166751-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Releasing buffered frames has to turn off the PSE redirect for the
station, otherwise the released frames are looped straight back into the
driver PS queue. Nothing ever turns it back on: mt7603_sta_ps() only runs
on an observed PM bit transition, and MT_WCID_FLAG_PS keeps mt76 from
reporting the same state twice. After the first service period the
hardware therefore treats a dozing station as awake and transmits at it
directly, which is where the retry storms and the packet loss reported
against U-APSD clients come from.
Re-arm hardware buffering from mt7603_mac_work() for every station that
is still known to be asleep, once the PSD queue has drained and the
released frames have passed the redirect stage. Frames that are still
queued belong to the service period that was just served, so unlike on a
sleep transition they must not be pulled back with mt7603_filter_tx().
Track the sleep state separately from the WTBL state, so a station that
wakes up while the re-arm is pending is not put back to sleep.
Link: https://patch.msgid.link/20260801145334.1166751-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7603_rx_loopback_skb() marks a TID as buffered when the hardware
redirects a frame into the driver PS queue, but nothing ever clears that
state again. mac80211 therefore keeps the TIM bit set for the station and
keeps routing every service period to the driver, which also prevents it
from releasing frames it has buffered itself.
Clear the buffered state for every requested TID that has no frames left
in the PS queue.
Link: https://patch.msgid.link/20260801145334.1166751-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Frames released from the driver PS queue were all tagged with MORE_DATA
and none of them ever carried the EOSP bit, so from the client's point of
view a U-APSD service period was started but never finished. Clients that
keep their receiver on until EOSP arrives stop sending trigger frames,
and all downlink traffic for that station stalls until they give up.
ieee80211_sta_eosp() only cleared the service period state inside
mac80211, which is why the mismatch went unnoticed.
Assign MORE_DATA per frame and set the wire EOSP bit on the last one. If
the last released frame is a bufferable MMPDU it has no QoS control field
to carry EOSP, so let mac80211 append a QoS-Null frame instead.
Also stop handing the remaining frame budget to
mt76_release_buffered_frames() once frames have been released from the PS
queue: both would signal the end of the same service period. Releasing
fewer frames than requested is allowed, and MORE_DATA tells the client to
trigger again.
Link: https://patch.msgid.link/20260801145334.1166751-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When the driver implements .release_buffered_frames, mac80211 leaves the
U-APSD signalling entirely to the driver: "In this case it is also
responsible for setting the EOSP flag in the QoS header of the frames"
(include/net/mac80211.h). Only IEEE80211_TX_STATUS_EOSP was being set,
which merely ends the service period inside mac80211, so on air the
service period was never terminated. Clients that wait for EOSP before
going back to doze keep the SP open and stop triggering, which stalls all
downlink traffic for that station.
Set the wire EOSP bit on the last frame of a U-APSD service period.
EOSP has no meaning for a PS-Poll response, so pass the release reason
down and leave those frames alone.
Link: https://patch.msgid.link/20260801145334.1166751-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable MT_DRV_HW_PS_BUFFERING and handle MCU_UNI_EVENT_PS_SYNC with
all three TLV formats (single client, multi-client packed entries,
and bitmap).
Link: https://patch.msgid.link/20260801145334.1166751-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable MT_DRV_HW_PS_BUFFERING and handle MCU_EXT_EVENT_PS_SYNC to
track station power-save state via firmware notifications.
Link: https://patch.msgid.link/20260801145334.1166751-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add MT_DRV_HW_PS_BUFFERING flag for drivers where firmware controls
the TIM bit based on buffered frames. Instead of blocking all TX to
PS stations (which starves firmware and prevents TIM from being set),
allow limited frame delivery using AQL pending airtime as the
throttle. Replenish the firmware buffer on TX completion.
Add mt76_sta_ps_transition() helper for drivers to call from MCU
PS sync events.
Link: https://patch.msgid.link/20260801145334.1166751-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
