| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replacing strcpy() with strscpy() ensures than overflow of the target
buffer cannot happen.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260608095500.2567-1-david.laight.linux@gmail.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Before commit 156460811def ("soc: fsl: qe: Change GPIO driver to a
proper platform driver") qe_add_gpiochips() was walking the device
tree to find all nodes with compatible "fsl,mpc8323-qe-pario-bank".
After that commit the discovery is handled by the platform core,
therefore it is necessary to call of_platform_default_populate() on
the par_io node.
Fixes: 156460811def ("soc: fsl: qe: Change GPIO driver to a proper platform driver")
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/a1db12ef75bf881dd5fba893a37db0c8517eca1b.1785414349.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
The last mentions of this driver on local Linux and telco support forums
date back to 2011. This does not prove that no users remain, but the
likelihood is too low to justify continuing to carry the driver in the
kernel.
The maintainer agreed that the driver should be removed and noted that it
is simple enough to build as an external module if a user resurfaces [1].
Remove the driver along with its Kconfig, defconfig, build and MAINTAINERS
entries.
[1] https://lore.kernel.org/linux-serial/20260218152330.GI26902@suse.cz/
Assisted-by: Codex:GPT-5.6
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20260803091938.259944-1-qingfang.deng@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new SoC data structure for Tegra264 platforms and register the
nvidia,tegra264-sdhci compatible string. Configure the supported
features and tap delay values for the Tegra264 SDHCI controller.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add a new SoC data structure for Tegra238 platforms and register the
nvidia,tegra238-sdhci compatible string. Configure the supported
features and tap delay values for the Tegra238 SDHCI controller.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Replace static asserts on MIPS firmware structures offsets and sizes
with more compact macros that are already used for similar checks on
common firmware interface structures.
Reviewed-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Link: https://patch.msgid.link/20260729-fwif-checks-updates-v1-2-af65e9606a7e@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
|
|
The same macros are redefined in three places, so move them to a common
file to reduce duplication and make it easier to reuse them.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Co-developed-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Link: https://patch.msgid.link/20260729-fwif-checks-updates-v1-1-af65e9606a7e@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
|
|
Prolific PL256X devices are multi-port USB-to-UART controllers,
including the PL2533, PL2543 and PL2565 variants.
These devices use vendor requests that differ from those used by the
existing TYPE_HX and TYPE_HXN devices. They also require a separate UART
reset request and use a port-specific register for configuring flow
control.
Add a new TYPE_MP device type and select the appropriate vendor requests,
reset operation and flow-control register for PL256X devices. Store the
USB interface number so that requests can be directed to the corresponding
UART port.
Detect the supported PL256X variants using bcdDevice before issuing any
legacy vendor requests, as PL256X devices do not accept those requests.
PL256X devices support baud rates up to 24 Mbps and do not use divisor
encoding.
Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
Link: https://lore.kernel.org/all/CAAZvQQ6O4p35Xs2hVYaoJxD4D7U0YonsdweuPh6W8RQVhvoUNw@mail.gmail.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The H_WATCHDOG input and output definitions are currently local to the
pseries watchdog driver. The next patch in this series also needs these
definitions to issue H_WATCHDOG hypercalls outside the watchdog driver.
Move the H_WATCHDOG definitions to a new common header,
asm/papr-watchdog.h, so they can be shared without duplicating the
PAPR watchdog definitions.
No functional changes.
Cc: stable@vger.kernel.org
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260727053416.276317-2-sourabhjain@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
Qualcomm pin control fixes for v7.2-rc6
- mark gpio and pci reset as a GPIO pin functions in pinctrl-ipq8064
- fix audio_sec_mclk_in1/out1 pin numbers in pinctrl-ipq9650
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Pin 0 is a valid pin ID, but spacemit_pinconf_get() rejects it by
testing the numeric ID rather than the result of the descriptor lookup.
It also fails to reject nonzero IDs absent from the SoC pin table before
computing their register addresses. Check the descriptor and use its pin
ID for the register lookup.
spacemit_pinconf_group_set() validates only the first group member when
generating the configuration. If a later member is invalid,
spacemit_pin_set_config() returns -EINVAL, but the callback ignores it
and reports success after partially updating the group.
Validate every group member before writing any registers so malformed
groups fail without being partially applied.
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
pinctrl_generic_to_map() parses DT configuration and allocates pinctrl
maps via pinctrl_utils_reserve_map().
If subsequent steps (such as pinctrl_utils_add_map_mux(),
pinctrl_generic_add_group(), pinconf_generic_parse_dt_config(), or
pinctrl_utils_add_map_configs()) return an error, *maps may contain
partially allocated map entries. Returning the error directly without
freeing *maps leaks the allocated mapping memory across all drivers
that rely on pinctrl_generic_to_map().
Fix this by calling pinctrl_utils_free_map() and resetting *maps,
*num_maps, and *num_reserved_maps in the error path of
pinctrl_generic_to_map().
Fixes: aaaf31be0426 ("pinctrl: extract pinctrl_generic_to_map() from pinctrl_generic_pins_function_dt_node_to_map()")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The EIC7700 pinctrl driver does not handle PIN_CONFIG_PERSIST_STATE
specifically, and returns -EOPNOTSUPP from the default case.
Since all pins on the EIC7700 SoC are persistent over suspend, the
correct behaviour is to accept this parameter and return success.
Add an explicit case for PIN_CONFIG_PERSIST_STATE that returns 0 to
prevent errors when this parameter is set.
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Fixes: 5b797bcc00ef ("pinctrl: eswin: Add EIC7700 pinctrl driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The driver takes the driver port lock of both the OOB port and the port
itself when setting the modem control signals, which confuses lockdep.
Mark the OOB port lock as belonging to a separate subclass to suppress
false positive lockdep deadlock warnings.
Reported-by: syzbot+2051460e19471eeb42c3@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/6a6cd832.1aa927e4.17d4bf.0007.GAE@google.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The existing coreboot_table_populate() bounds checks limit individual
entries to the mapped length. However, coreboot_table_probe() replaces
the platform resource length with header and table sizes supplied by
firmware before mapping the full table.
A malformed table can overflow the 32-bit size addition or advertise an
extent beyond the resource, causing the driver to map and parse memory
outside the resource. A resource shorter than the fixed header is also
mapped as though it contained a complete header.
Reject resources shorter than the fixed header. After validating the
signature, require a complete header, calculate the advertised extent
with overflow checking, and reject extents beyond the resource before
remapping the table.
Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Link: https://lore.kernel.org/r/20260801165651.42172-1-acharyalaxman8848@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Simplify the driver by using the block-scope guard(pm_runtime_active)
instead of manually invoking pm_runtime_get_sync() and
pm_runtime_put().
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-3-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver requests the interrupt during probe, which by default enables
it. If the bootloader left the keypad interrupts enabled, or if a
spurious interrupt fires early before the driver is fully initialized
and clocks are enabled, the interrupt handler will attempt to read
registers and may cause a synchronous external abort.
Fix this by requesting the interrupt with IRQF_NO_AUTOEN, keeping it
disabled during probe. Enable the interrupt in samsung_keypad_start()
when the device is opened and ready, and disable it in
samsung_keypad_stop() when the device is closed. Remove the redundant
re-enabling of the interrupt at the end of samsung_keypad_stop().
Additionally, manually clear the pending interrupt status during system
resume when the device is closed to avoid immediate resume.
Fixes: 0fffed27f92d ("Input: samsung-keypad - Add samsung keypad driver")
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-2-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When checking if the device can wake the system, we should pull the
device_may_wakeup() check to the caller instead of repeating it inside
the toggle_wakeup() handler. Furthermore, when configuring the wakeup,
we should safely ensure we write to the registers in the correct order:
configure the interrupt receiver before enabling the peripheral's wake
functionality, and vice-versa.
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-1-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1].
Fixes: 05be1d079ec0 ("Input: psmouse - support for the FocalTech PS/2 protocol extensions")
Signed-off-by: Richard Davies <richard@arachsys.com>
Link: https://patch.msgid.link/20260701190932.14960-1-richard@arachsys.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9fbf ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The internal keyboard of the Xiaomi Book Pro 14 does not work unless
atkbd skips deactivating it at the end of atkbd_probe().
Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver
never writes to the keyboard at all, so the Caps Lock LED is lost. The
atkbd_deactivate_fixup quirk fixes both without a boot parameter.
DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026
Signed-off-by: Zhefu Zhang <a723356@gmail.com>
Reviewed-by: Andrew Zhou <zhoulol888@gmail.com>
Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally.
Cc: stable@vger.kernel.org # 6.15
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Fix PCI MMIO write syscall falsely reporting success for mappings not
valid for MMIO when MIO is unavailable by returning -EFAULT
- Fix CPRB parameter buffer overflows in zcrypt CCA AES cipher and ECC
private key conversion by rejecting oversized key tokens
- Fix buffer overreads and length underflow in pkey and zcrypt CCA
token validation by checking length fields against actual buffer
sizes
- Fix out of bounds permission bitmap access in zcrypt EP11 admin CPRB
filtering on custom device nodes by using AP_DOMAINS as the limit
- Fix speculative permission bitmap reads in zcrypt CCA and EP11 admin
CPRB handling by sanitizing user controlled domain indexes
- Fix sensitive key material left in zcrypt CCA clear key import
buffers by scrubbing CPRB and temporary buffers after use
* tag 's390-7.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
s390/zcrypt: Close speculative mem read possibility
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
s390/zcrypt: Validate length for CCA ECC private key requests
s390/zcrypt: Validate length for CCA AES cipher key requests
s390/pci: Fix s390_pci_mmio_write syscall error return without MIO
|
|
Some P2P action frame paths assume the P2P device vif is always
available. That is not true when userspace sends non-P2P public action
frames through the primary interface, or when action-frame abort runs
after the P2P device vif has not been created.
Fall back to the primary vif when aborting an action frame without a P2P
device vif, and guard P2P device saved IE access before using it for
peer channel search.
Fixes: 30fb1b272909 ("brcmfmac: use actframe_abort to cancel ongoing action frame")
Fixes: 6eda4e2c5425 ("brcmfmac: Add tx p2p off-channel support.")
Signed-off-by: Jason Huang <jason.huang2@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260722082608.412472-1-Jason.Huang2@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
brcmf_msgbuf_init_pktids() takes the DMA direction from its callers,
but never stores it in the packet ID state. Since the state is zeroed,
pktids->direction remains DMA_BIDIRECTIONAL for both the TX and RX
packet ID pools.
All msgbuf packet ID map and unmap paths use pktids->direction. As a
result, TX buffers requested with DMA_TO_DEVICE and RX buffers requested
with DMA_FROM_DEVICE are mapped and unmapped as DMA_BIDIRECTIONAL
instead.
Store the caller-provided direction when initializing the packet ID
state.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260724092530.674624-1-pengcan@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Firmware messages carry flow_ring_id values which brcmfmac converts
to an internal flowid by subtracting
BRCMF_H2D_MSGRING_FLOWRING_IDSTART. The resulting value is used as
a bit index in txstatus_done_map and as an array index into
msgbuf->flowrings and the flowring state.
Validate the firmware supplied flow_ring_id before using it. This
prevents flow_ring_id values below BRCMF_H2D_MSGRING_FLOWRING_IDSTART
from underflowing and rejects values outside msgbuf->max_flowrings.
In the tx status path, complete the packet with an error after
removing a valid packet id so the skb is not leaked when the flow
ring id is invalid.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260723055618.550834-1-pengcan@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Ping-Ke Shih says:
==================
rtw-next patches for v7.3
Some random cleanups and fixes on rtlwifi, rtw88 and rtw89. The major
features added to rtw89 are listed:
rtw89:
- add LED support
- update BT-coexistence mechanism to support dual Bluetooth for RTL8922D
- support WiFi 7 chip RTL8922DE
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Felix Fietkau says:
===================
mt76 patches for 7.3
- fixes
- mt7925 NAN support
- mt7928 support
- mt7996 AP powersave improvements
===================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley"
"No core changes. The largest driver fix is the reversion of threaded
interrupt handlers in UFS and the next is the resume deadlock fix in
hisi_sas which extends into libsas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Initialize hba->rpmbs list in ufshcd
scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit
scsi: target: Clear cmd_cnt when initial counter enrollment fails
scsi: zfcp: Fix memory leak during adapter release by destroying gid_pn_req
scsi: ufs: core: Revert "Delegate the interrupt service routine to a threaded IRQ handler"
scsi: ufs: core: Cancel RTC work in active-active suspend
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
scsi: ufs: dt-bindings: Add missing mcq reg for qcom,sa8255p-ufshc
scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
|
|
https://github.com/MorseMicroLabs/linux-wireless
Lachlan Hodges says:
====================
- Just a single fix for synchronously shutting down timers to prevent
a UaF.
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
wilc_wfi_mon_xmit() reads the radiotap length before ensuring that the
fixed header is present. After stripping that header, it reads the frame
type and all three 802.11 addresses without checking how much frame data
remains.
A truncated monitor injection can therefore cause out-of-bounds reads.
Validate the radiotap header first, use the common 802.11 helper to check
the variable header length, and require a complete three-address header
before using the addresses. This covers QoS and four-address data headers
while rejecting short control headers that this path cannot classify.
Signed-off-by: Mariano Baragiola <mbaragiola@linux.com>
Link: https://patch.msgid.link/20260728192610.2236361-1-mbaragiola@linux.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The zd1211rw driver is designed for single-function Wi-Fi dongles and
hardcodes its USB endpoints. When a malformed USB device exposes multiple
interfaces that match the driver's device ID, the driver blindly binds to
all of them.
During probe(), the driver calls usb_reset_device(), which iterates over
all interfaces and invokes the pre_reset() callback for each bound
interface. Since multiple interfaces are bound to zd1211rw, pre_reset() is
called sequentially for each instance, acquiring their respective
&mac->chip.mutex. Because all instances initialize their mutexes with the
same lock class, lockdep detects a task acquiring a lock of the same class
it already holds and flags it as a possible recursive deadlock:
WARNING: possible recursive locking detected
kworker/0:1/11 is trying to acquire lock:
ffff88810371dde0 (&chip->mutex){+.+.}-{4:4}, at:
zd_chip_disable_rxtx+0x20/0x50
drivers/net/wireless/zydas/zd1211rw/zd_chip.c:1465
but task is already holding lock:
ffff8881138ddde0 (&chip->mutex){+.+.}-{4:4}, at: pre_reset+0x28c/0x380
drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1505
Fix this by explicitly rejecting secondary interfaces (bInterfaceNumber !=
0) during probe(). This ensures that only a single instance of the driver
binds to the device, eliminating the recursive locking scenario.
Fixes: e85d0918b54f ("[PATCH] ZyDAS ZD1211 USB-WLAN driver")
Assisted-by: Gemini:gemini-3.5-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+0ec3d1a6cf1fbe79c153@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0ec3d1a6cf1fbe79c153
Link: https://syzkaller.appspot.com/ai_job?id=00724ef7-fd77-4cde-9779-895b8f63c2f6
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Link: https://patch.msgid.link/20260730065231.1644030-1-sst@poczta.fm
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- switchtec fix for register programming
- sun6i descriptor reclaim fix
- Intel idxd fixes for double free in error and setup failure
- Qualcomm bam dma command element fix
* tag 'dmaengine-fix-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: qcom: bam_dma: Fix command element mask field for BAM v1.6.0+
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
dmaengine: idxd: fix double free of wq, engine, and group structs
dmaengine: sun6i-dma: Fix reclaim descriptors while terminating DMA
dmaengine: switchtec-dma: fix FIELD_GET misuse when programming SE threshold
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- fixes for zynqmp clock and pm error handling and SERDES scrambler
register handling
- Rockchip SSC spread fix
- Qualcomm musb return call fix
* tag 'phy-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: zynqmp: keep SERDES scrambler and 8b/10b enabled for USB
phy: zynqmp: use read-modify-write for SERDES scrambler bypass
phy: zynqmp: fix L0_TM_DISABLE_SCRAMBLE_ENCODER mask
phy: zynqmp: fix runtime PM leak on probe allocation failure
phy: zynqmp: fix clock error handling in xpsgtr_phy_init()
phy: rockchip: naneng-combphy: Always configure SSC spread direction
phy: qcom: m31-eusb2: Fix return value of init call
|
|
rx_reorder_ptr is a dynamically allocated array which is done near the
main struct allocation. Combine the two to avoid freeing separately.
Also fix the type to what it actually is. void is normally used to avoid
casting but there's no need here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20260729183715.691287-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The remain_on_channel, mgmt_tx, and probe_peer ops previously used
a u64 *cookie output parameter. Now that cfg80211 pre-assigns the
cookie value before invoking drivers, the parameter conveys a value
from caller to driver, not the other way around. Convert it to a
plain u64 input parameter across the ops struct (cfg80211.h),
rdev-ops.h wrappers, nl80211.c/mlme.c call sites, mac80211, and
all driver implementations.
The tx_control_port op is excluded: its cookie pointer is nullable
(passed as NULL when dont_wait_for_ack is set), so the nullable
pointer semantics are still required.
Internal mac80211 helpers ieee80211_start_roc_work() and
ieee80211_attach_ack_skb() still take u64 *cookie because they
assign to the pointee; their callers now pass &cookie to take the
address of the local value parameter.
wil6210's internal wil_p2p_listen() is also updated to take u64
cookie since it is called directly from the remain_on_channel
callback.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-12-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop using params->buf address as cookie value and simply pass the
pre-assigned cookie in frame tx status. This implementation seems
to fire-and-forget the transmitted frame as the cookie is not used
in any other way.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-11-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop overwriting *cookie with a random value in qtnf_mgmt_tx(). The
internal firmware frame identifier (short_cookie) is unchanged.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-10-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop calling nxpwifi_roc_cookie() to generate cookies in
nxpwifi_cfg80211_remain_on_channel() and nxpwifi_cfg80211_mgmt_tx().
Use the pre-assigned cookie from cfg80211 instead.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-9-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop generating cookies by incrementing inc_roc_cookie in
remain_on_channel() and via get_random_u32() in mgmt_tx(). Use the
pre-assigned cookie from cfg80211 instead. Remove the now-unused id
local variable from remain_on_channel().
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-8-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop generating cookies via get_random_u32() in
mwifiex_cfg80211_remain_on_channel() and mwifiex_cfg80211_mgmt_tx().
Use the pre-assigned cookie from cfg80211 instead.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-7-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop generating cookies in brcmf_p2p_remain_on_channel() and
brcmf_cfg80211_mgmt_tx().
For remain_on_channel, remove the cookie increment from
brcmf_p2p_discover_listen() and store the pre-assigned cookie in
p2p->remain_on_channel_cookie. The expiry callback in
brcmf_p2p_notify_listen_complete() already reads from that field.
For mgmt_tx, remove the "*cookie = 0" assignments in
brcmf_cfg80211_mgmt_tx() and the cyw extension. The pre-assigned
cookie is then correctly passed to cfg80211_mgmt_tx_status() which
already uses *cookie.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-6-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
probe_peer
Stop overwriting the pre-assigned cookie in wil_p2p_listen(),
wil_cfg80211_mgmt_tx(), and wil_cfg80211_probe_peer().
For remain_on_channel, store the pre-assigned cookie in p2p->cookie
instead of incrementing it. All cancel and expiry callbacks already
read from p2p->cookie so they pick up the correct value.
For mgmt_tx, remove the defensive "cookie ? *cookie : 0" guard;
cfg80211 guarantees a non-NULL cookie pointer.
For probe_peer, store the pre-assigned cookie in req->cookie instead
of the CID value. The CID is still available via req->cid for STA
lookup in wil_probe_client_handle().
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-5-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop generating cookies in ath6kl_remain_on_channel() and
ath6kl_mgmt_tx(). cfg80211 now pre-assigns the cookie before calling
into the driver.
For remain_on_channel, store the pre-assigned cookie in
vif->last_roc_id. Widen last_roc_id and last_cancel_roc_id from u32
to u64 to hold the full 64-bit cookie value.
For mgmt_tx, store the pre-assigned cookie in wmi->last_mgmt_tx_cookie
so the firmware TX status event handler can pass the correct cookie to
cfg80211_mgmt_tx_status(). Thread the cookie through the powersave
queue (ath6kl_mgmt_buff) so it is available when the frame is
eventually dequeued and sent.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-4-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
devm_request_threaded_irq() automatically logs detailed error messages
on failure. Remove the now-redundant driver-specific dev_err_probe()
call.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20260715135030.326290-4-panchuang@vivo.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
devm_request_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err_probe() call.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260715135030.326290-3-panchuang@vivo.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
devm_request_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260715135030.326290-2-panchuang@vivo.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
mchp_tc_probe() reads the devicetree "reg" cell - a u32, per the API
contract of of_property_read_u32_index() - into a signed int, so the
bounds check "channel > 2" fails to reject cell values at or above
0x80000000: reinterpreted as a negative int, they compare below 2 and
pass validation.
A malformed devicetree can therefore drive a negative channel into the
ATMEL_TC_REG() offset arithmetic, making the driver access syscon
regmap offsets outside the TC block's register window, and into the
"t%d_clk" clock-name formatting, where it truncates clk_name (sized
for "t0_clk".."t2_clk").
Declare channel as u32, matching the API contract; the unsigned
comparison then rejects everything except channels 0..2. Adjust the
format specifier to %u accordingly, which also resolves the W=1
warning that exposed the gap:
microchip-tcb-capture.c:520:56: warning: '%d' directive output may
be truncated writing between 1 and 11 bytes into a region of size
6 [-Wformat-truncation=]
note: directive argument in the range [-2147483648, 2]
No behavior change for well-formed devicetrees: channels 0..2 take
identical paths before and after.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Assisted-by: Claude:claude-fable-5 [gcc W=1]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260714042910.7-1-bbnpreetsingh@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
The ACPI spec bizarrely indicates that the PMU interrupt can be
edge-triggered, which contradicts the very basics of the PMU
architecture (SW is required to clear the interrupt condition for
the level to drop).
Remove the code parsing this flag and always flag the interrupt
as level triggered, no matter what firmware says.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we have 64-bit counters, we can reasonably assume we'll never have to
handle an overflow before the end of the universe (since we're a system
PMU with no sampling). Thus even if firmware does specify an IRQ, we can
still continue in the event of being unable to request it. This can help
systems where IRQs cannot be claimed exclusively, or are broken in other
ways.
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
