| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Adds attributes that allow for remapping the M-keys with up to 5 values
when in macro mode. There are 2 mappable buttons on the rear of the
device, M1 on the right and M2 on the left. When mapped, the events will
fire from one of three event devices: gamepad buttons will fire from the
device handled by xpad, while keyboard and mouse events will fire from
respectively typed evdevs provided by the input core. Names of each
mapping have been kept as close to the event that will fire from the evdev
as possible, with context added to the ABS_ events on the direction of the
movement.
Initial reverse-engineering and implementation of this feature was done
by Zhouwang Huang. I refactored the overall format to conform to kernel
driver best practices and style guides. Claude was used as an initial
reviewer of this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Link: https://patch.msgid.link/20260529072111.7565-3-derekjohn.clark@gmail.com
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds configuration HID driver for the MSI Claw series of handheld PC's.
In this initial patch add the initial driver outline and attributes for
changing the gamepad mode, M-key behavior, and add a WO reset function.
Sending the SWITCH_MODE and RESET commands causes a USB disconnect in
the device. The completion will therefore never get hit and would trigger
an -EIO. To avoid showing the user an error for every write to these
attrs a bypass for the completion handling is introduced when timeout ==
0.
The initial version of this patch was written by Denis Benato, which
contained the initial reverse-engineering and implementation for the
gamepad mode switching. This work was later expanded by Zhouwang Huang
to include more gamepad modes. Finally, I refactored the drivers data
in/out flow and overall format to conform to kernel driver best
practices and style guides. Claude was used as an initial reviewer of
this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The tap-to-mute button of the HyperX QuadCast 2 (03f0:07b4) is handled
entirely in the device firmware. The firmware gates the audio internally
but never sends the Telephony "Phone Mute" usage (0x2f) that its own report
descriptor advertises, and it does not touch the UAC feature unit either.
Consequently neither an evdev key event nor an ALSA mixer change is ever
generated, and userspace has no way to learn that the microphone was muted:
desktops keep showing the microphone as live, and conferencing applications
keep displaying an unmuted microphone while transmitting silence.
The mute state is reported through a vendor-defined collection instead:
06 c0 ff Usage Page (Vendor-Defined 0xFFC0)
a1 01 Collection (Application)
06 c1 ff Usage Page (Vendor-Defined 0xFFC1)
85 77 Report ID (0x77)
09 f0 Usage (0xF0)
75 08 95 3f Report Size (8), Report Count (63)
81 02 Input (Data,Var,Abs)
Pressing the button emits a 64-byte report on that collection:
77 06 00 00 ... microphone unmuted
77 06 01 00 ... microphone muted
where byte 1 identifies the mute event and byte 2 carries the resulting
state. As the payload is an opaque vendor blob carrying no HID usages,
hid-input cannot map it and a hwdb entry cannot express it either.
Add a driver that decodes the report and emits KEY_MICMUTE, which makes the
button behave like any other microphone mute key.
Note that the device reports the resulting absolute state, whereas
KEY_MICMUTE is a momentary key that userspace acts on as a toggle, so the
driver emits one keypress per state change.
Tested on a HyperX QuadCast 2 (03f0:07b4).
Signed-off-by: Benjamin Blume <benjaminblume@posteo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Arctis Nova 5X, Nova 7 Gen2, and Nova 7 2026 refresh headsets answer
status polls, but also send unsolicited battery and connection updates
on a second HID interface (interface 5). Use that interface through
async_interface so the driver does not have to poll. Add request and
parse helpers for the Nova status format (0xb0/0xb7/0xb9/0xbb opcodes).
The original (pre-Gen2) Arctis Nova 7 family answers the same status
opcodes on the same interfaces, but reports battery capacity as a
discrete 0-4 level instead of a raw percentage. Add a second parse
function that maps that level through steelseries_map_capacity(), and a
separate device_info so the two capacity encodings cannot get mixed up.
Add the fourteen USB product IDs that share these protocols:
0x2253 Arctis Nova 5X
0x2202 Arctis Nova 7
0x2206 Arctis Nova 7X
0x22a4 Arctis Nova 7X (alternate PID)
0x223a Arctis Nova 7 Diablo
0x227a Arctis Nova 7 World of Warcraft Edition
0x22a1 Arctis Nova 7 2026
0x22a7 Arctis Nova 7P 2026
0x22a5 Arctis Nova 7X 2026
0x22a9 Arctis Nova 7 Diablo 2026
0x227e Arctis Nova 7 Gen 2
0x2258 Arctis Nova 7X Gen 2
0x229e Arctis Nova 7X Gen 2 (alternate PID)
0x22ad Arctis Nova 7X Gen 2 (alternate PID)
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some headsets expose a second HID interface that sends battery and
connection updates on its own. Watching that interface lets the driver
stop polling the sync interface. Add a
steelseries_device_info::async_interface field and the code to handle
it:
- The driver binds both the sync and async interfaces. The async
interface shares the steelseries_device created by the sync
interface. It finds the sibling with usb_ifnum_to_if(), and before
trusting its intfdata it rejects non-HID siblings by descriptor
class and holds the sibling's device lock across the lookup, so a
crafted device cannot cause a type-confused read and a concurrent
unbind cannot free the hid_device from under it. It then takes a
reference and returns -EPROBE_DEFER until the sync interface has
probed. If the sync interface never binds, the async interface
defers forever, which is fine here.
- raw_event() now holds sd->lock and re-checks sd->removed so events
on either interface are serialised against removal.
- status_work runs once for async devices instead of rearming. A
single status request is sent when the headset connects to get the
initial battery level.
No device sets async_interface yet. This is the infrastructure for the
next commit.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The next change shares one steelseries_device between two HID
interfaces, so the state can outlive either interface. Stop using devm
for it. Reference count the struct with a kref and free it from
steelseries_device_release(). Register and unregister the power supply
explicitly, and clear sd->battery under sd->lock in remove() so it is
not touched after it is unregistered.
Drop the global atomic battery counter and name the power supply after
the device (hdev->uniq, or dev_name() when empty), as hid-input and the
other HID battery drivers do.
No functional change for the current single-interface devices.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Map the Arctis 9 raw battery value over 0x64 (empty) to 0x9a (full)
instead of 0x68 to 0x9d. These values match the HeadsetControl project
[1] and fit the calibration points from an independent reverse
engineering of the battery tray (about 25% at raw 112, 50% at raw 125)
[2].
I do not have this headset. The values come from those references and
were not measured directly.
[1] https://github.com/Sapd/HeadsetControl/blob/master/lib/devices/steelseries_arctis_9.hpp
[2] https://magnier.io/reverse-engineering-arctis-9-battery-tray/
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Report POWER_SUPPLY_STATUS_FULL when the headset is connected, charging,
and at 100% capacity. It reported CHARGING in that case before.
The charging flag doubles as a power-present signal: the headset keeps
reporting charging while it sits docked at 100%, and clears the flag as
soon as it runs on battery. Gating FULL on the charging flag therefore
avoids reporting FULL for an unplugged headset that merely happens to be
at 100%, which would otherwise hide the discharge state from userspace.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Replace the per-product if/else quirk bitmap with a
steelseries_device_info struct. Each model provides its capabilities,
sync_interface, and request_status/parse_status callbacks. Report
sending is folded into steelseries_send_report() and the feature and
output wrappers, and the battery identifiers lose their per-model names.
This is mostly a refactor, but it changes two things:
- Battery status is polled from a periodic delayed work (status_work)
instead of being requested from raw_event(). The interval stays at
3s.
- Arctis 1 no longer clamps the reported capacity to 100% while
disconnected. The connection state already controls how this is
shown to userspace.
ARCTIS_1_X and ARCTIS_9 keep working. No new devices are added.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Move all Arctis headset code (battery monitoring, wireless status,
power supply registration, raw event handling) from hid-steelseries.c
into the new hid-steelseries-arctis.c driver module.
hid-steelseries.c keeps the SRWS1 racing wheel and the MSI RGB LED
devices, while hid-steelseries-arctis.c handles the Arctis 1 (Xbox) and
Arctis 9 wireless headsets with their own device table, probe, remove,
and raw_event implementations.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The SteelSeries Arctis 1 Wireless for Xbox (0x12b6) was labelled as the
plain Arctis 1 Wireless. Rename USB_DEVICE_ID_STEELSERIES_ARCTIS_1 to
USB_DEVICE_ID_STEELSERIES_ARCTIS_1_X, along with the matching quirk flag
and device table entry. The device ID value is unchanged.
Signed-off-by: Sriman Achanta <srimanachanta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When the Apple Magic Trackpad 2 (USB) is reset across a power transition
(e.g. resume from hibernation) it drops out of multitouch mode: it keeps
sending report ID 0x02 on its HID_TYPE_USBMOUSE interface, but the packet
shrinks from 21 to 8 bytes and the trackpad2 handler drops it (size < 12).
Clicks still work but pointer motion is lost until the device is re-plugged
or the driver reloaded.
Re-enable multitouch from .reset_resume via the workqueue. Only
.reset_resume is needed; suspend-to-idle keeps the device powered and
retains multitouch.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Assisted-by: Claude-Code:claude-opus-4-8
Signed-off-by: Christopher Kodama <ckhordiasma@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
lg4ff_raw_event() rewrites fixed report offsets when combined pedals are
enabled. It currently assumes that each product report contains every
source and destination byte used by the rewrite.
Return without rewriting a short report before each product-specific
access. Apply the same bound to the computed offset path.
Fixes: c832f86effbc ("HID: hid-logitech: Add combined pedal support Logitech wheels")
Signed-off-by: Jiancheng Huang <jchuang@seu.edu.cn>
Assisted-by: Codex:gpt-5.6-luna
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The cleanup functions k90_cleanup_backlight() and
k90_cleanup_macro_functions() call led_classdev_unregister() before
cancel_work_sync():
led_classdev_unregister() <-- may free led->cdev.dev
cancel_work_sync() <-- wait for worker
If the LED worker (k90_backlight_work / k90_record_led_work) is
already running on another CPU, the following race can occur:
CPU 1 (worker) CPU 2 (remove)
--------------------- --------------------
if (led->removed) -> false
(passed the guard, about to read led->cdev.dev)
* preempted
removed = true
led_classdev_unregister()
-> led->cdev.dev freed
cancel_work_sync()
-> waits for worker
* resumes
dev = led->cdev.dev->parent <-- UAF!
Fix by swapping the order so that the worker is cancelled first:
cancel_work_sync() <-- wait for worker first
led_classdev_unregister() <-- then safe to unregister
The removed flag is set before cancel_work_sync() so that if
led_classdev_unregister() internally triggers another brightness
update (which re-schedules the work), the worker will see the flag
and return immediately.
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The corsair_remove() function currently frees the k90 driver data before
calling hid_hw_stop(). Since hid_hw_stop() stops HID I/O, the event
callback corsair_event() can still be invoked between the kfree() and
hid_hw_stop(), and will dereference the freed drvdata->k90 pointer to
write record_led.brightness.
Reorder the remove sequence so that hid_hw_stop() is called first.
Once hid_hw_stop() completes, the HID device is disconnected and no
URBs are active, so corsair_event() cannot fire anymore. The driver
data is freed only afterwards.
Additionally, set drvdata->k90 to NULL after kfree() as a defensive
measure, matching the existing pattern in the error path of
k90_init_macro_functions().
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We have seen in our CI the following KASAN message:
BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core]
Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764
[...]
[<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core]
[<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core]
[<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa]
[<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa]
[...]
The buggy address is located 4128 bytes inside of
allocated 4384-byte region [0000000176794000, 0000000176795120)
So in essence we read 16 bytes beyond 4384-byte allocation.
create_direct_keys calculates the pointer and length for in and out
buffers.
The size calculation for in includes the entire structure
size (out + in + mtt[]) but the pointer passed to cmd_exec points only
to the 'in' field, skipping the 'out' field.
This causes mlx5_copy_to_msg() to read beyond the allocated buffer
by sizeof(out) bytes when copying command data.
Properly calculate the input size to match the pointer and allocation size.
Fixes: 0071b138d44a ("vdpa/mlx5: Create direct MKEYs in parallel")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260706141537.3510294-1-borntraeger@linux.ibm.com>
|
|
vhost_vdpa_pa_map() adds the IOVA page offset to the user-controlled map
size before computing the number of pages to pin. On 32-bit systems,
where unsigned long is narrower than u64, that addition can overflow and
the code can pin and map fewer pages than the requested IOTLB range.
Reject sizes that overflow the unsigned long page-count calculation.
Fixes: 22af48cf91aa ("vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <CAMuQ4bX-iDvcUOPPY+NLz95tkRJYwWqvzAr=U48uNaub_HZLGw@mail.gmail.com>
|
|
vhost_iotlb_add_range_ctx() only retires an old entry when the table
has a non-zero limit, has exactly reached that limit and has
VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating
entries after reaching their configured limit.
Existing vhost devices allocate their IOTLB with max_iotlb_entries from
vhost.c, which defaults to 2048 and is tunable by module parameter. Use
the caller-provided limit at the allocation point instead of adding a
separate default in the common IOTLB helper, and reject non-positive
values in vhost paths that can report an error.
Other vhost IOTLB users should not create zero-limit tables when entries
can be populated from userspace or guest-controlled requests. Add
caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and
vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require
at least two entries for vdpa_sim and mlx5 vDPA paths that install
full-range mappings, since those mappings are split into two IOTLB
entries.
Handle full-range mappings in the common helper by checking that the
IOTLB can hold both split entries before inserting the first half. This
avoids returning an error after leaving a half mapping behind.
When the table is full, keep the existing retire behavior for retiring
tables and return -ENOSPC for non-retiring tables. Reuse the retired map
node instead of freeing it and allocating a replacement, so a stream of
IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table
has reached its limit. If a zero-limit IOTLB still reaches the common
helper, treat it as a configuration error and return -EINVAL.
I found this bug myself, though the patch was written with AI assistance.
Fixes: 0bbe30668d89 ("vhost: factor out IOTLB")
Assisted-by: OpenAI-Codex:GPT-5
Signed-off-by: Linfeng Sun <linfeng.sun.dev@gamil.com>
Message-ID: <AMYAtgAiKmgYcSQT5ukl-4qq.3.1781960405943.Hmail.241270009@hdu.edu.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The AULA Mini 60 HE Pro wireless keyboard dongle (USB ID
0c45:fefe) becomes unresponsive after roughly one minute of idle.
No error appears in dmesg; the only recovery is physically
replugging the dongle.
This has been reproduced across kernels 6.8, 6.14 and 7.1.3.
Testing shows HID_QUIRK_ALWAYS_POLL alone resolves the issue,
verified via usbhid.quirks=0x0c45:0xfefe:0x400.
Signed-off-by: Yuxiang Lin <mclyxfdw@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
If enabling VDDIO fails after VDD has been enabled, the power-up
path returns without disabling VDD. This leaves the regulator enabled
and its enable count unbalanced.
Disable VDD before returning the VDDIO error.
Fixes: eb16f59e8e58 ("HID: i2c-hid: goodix: Add mainboard-vddio-supply")
Signed-off-by: Chao Huang <huangchao@kylinos.cn>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ASUS Zenbook A16 (UX3607OA), a Qualcomm Snapdragon X2 Elite Extreme
(Glymur)-based laptop, carries its main keyboard on an I2C-HID device
with the ID 0B05:4B42. Its Fn/media hotkeys are emitted as vendor-page
(HID_UP_ASUSVENDOR) usages on report 0x5A.
Match the device in hid-asus with the standard I2C keyboard quirks and
add the three usage mappings observed on the hardware:
0x85 -> KEY_CAMERA (Fn+F11, camera toggle)
0x86 -> KEY_PROG1 (Fn+F12, MyASUS key)
0x5f -> KEY_PROG2 (extra programmable key)
The camera-toggle key reports its usage (0x85) together with a companion
state byte in the same array report ("5a 85 01" / "5a 85 10"). The 0x10
companion aliases the brightness-down vendor usage and spuriously dims
the panel, so add QUIRK_FILTER_CAMERA_COMPANION to zero the companion
slots for this device before input mapping. The quirk is device-gated so
no other ASUS model is affected.
Assisted-by: Claude Code:claude-opus-4-8
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The BTP-KP20D dongle in Direct/HID mode (20dd:5159) re-enumerates every
few seconds because usbhid never submits its interrupt-IN URB: no HID
driver binds to the vendor-specific report descriptor, so the device is
never opened, and the firmware treats the idle endpoint as a lost link.
Add HID_QUIRK_ALWAYS_POLL to keep the interrupt-IN URB submitted from
probe time.
Signed-off-by: Aaron Ma <mapengyu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add KUnit coverage for Hyper-V synthetic HID initial device-info parsing.
The tests cover zero bLength, a valid descriptor plus report descriptor,
and a malformed report descriptor length that exceeds the received
message.
The same-translation-unit test uses a KUnit-only ACK bypass so parser
coverage does not require a live VMBus channel.
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length.
Fixes: b95f5bcb811e ("HID: Move the hid-hyperv driver out of staging")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fixes: 4b9c410e7d6d ("HID: sony: fix style issues")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091026.R9Pxd3PG-lkp@intel.com/
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Currently the code enqueue work items using mod_delayed_work(), using
system_wq, the old per-CPU Workqueue.
The function end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change the
workqueue with the new unbound version, system_dfl_wq.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The function end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change the
workqueue with the new unbound version, system_dfl_wq.
Cc: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Apple Magic Trackpad 2 (USB-C) reports a wildly wrong battery
capacity over Bluetooth, for example a constant 4% for a pack that is
actually at 74%.
The device's battery input report (0x90) is laid out as
[report-id][status][charge]. hid-input's synchronous capacity query,
hidinput_query_battery_capacity(), assumes the common
[report-id][capacity] layout and returns buf[1], which for this device
is the status byte rather than the charge (buf[2]).
magicmouse_fetch_battery(), which requests the battery report through
hid_hw_request() so the reply is decoded via the report descriptor at
the correct field offset, is gated to the USB models and never runs
over Bluetooth. The device does not push battery reports on its own
either, except a single one at connect time, which is delivered while
probe holds driver_input_lock and is silently dropped. All userspace
reads therefore go through the misparsing query, and the device is
stuck reporting its status byte as the capacity.
Enabling the fetch for Bluetooth is not sufficient on its own: user
space reacts to the power_supply registration immediately, so a query
is typically already in flight when the fetch reply is parsed.
hidinput_get_battery_property() stores the query result and marks the
battery as queried without rechecking whether a report arrived while
it was waiting, clobbering the just-reported correct value with the
misparsed one.
Fix this by adding HID_BATTERY_QUIRK_AVOID_QUERY for the Bluetooth
Magic Trackpad USB-C so the misparsing query path is never used, and
by fetching the battery at the end of probe for this device. hidp has
no asynchronous request() callback, so the fetch is serviced
synchronously via __hid_request() while probe still holds
driver_input_lock; call hid_device_io_start() first so the reply is
processed instead of being discarded.
Tested with a Magic Trackpad USB-C (004c:0324) over Bluetooth on
6.18.37: the reported capacity now matches the device (verified against
a raw GET_REPORT of report 0x90) and updates on reconnect.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Andrei Fed <andfed.net@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Sometimes recv report will reply with a stale result from a previous send
report. Instead of failing out, we should retry them, as they generally
reply correctly after three tries, give or take.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Steam Controller FEATURE reports encode the size of the message in the
message itself. Previously we were trusting that the size reported matched
the size we actually read, leading to a potential issue with short reads.
Instead, we should actually verify the length of the read.
Fixes: c164d6abf384 ("HID: add driver for Valve Steam Controller")
Reported-by: syzbot+75f3f9bff8c510602d36@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=75f3f9bff8c510602d36
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://syzkaller.appspot.com/bug?extid=75f3f9bff8c510602d36
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When requesting the serial number from a controller, the function will do
some basic bounds checking to make sure the reply is valid, as well as
capping off the reply with a null byte before copying. However, the error
logging can leak uninitialized memory in some cases. We can simplify and
solve this by just zero-initalizing the reply memory eagerly instead.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Adds more logging as appropriate, reindents an enum to match surrounding
style, as well as cleaning up some places where we can use guard() instead
of doing locking and unlocking manually.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This fixes a narrow window during the teardown sequence where callbacks
could still be scheduled during cleanup that would then have a dangling
pointer to the now-freed steam struct.
This also puts work canceling for rumble and mode switch in
steam_unregister, as that shouldn't persist while the client hdev is open.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
To avoid conflicts between anything touching the hidraw and the driver we
had previously detached the evdev nodes when the hidraw is opened. However,
this isn't sufficient to avoid FEATURE reports from conflicting, so we
change to fully unregistering the controller internally, leaving only the
hidraw active until it's closed.
This also unifies the unregister and connect callbacks, as now the logic
between these two callbacks is identical.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Steam Deck resets the haptic pattern every time it receives a rumble
packet, leading to weird discontinuities or sometimes cutting out entirely.
Instead of overloading the interface, Steam interally rate-limits sending
these packets, so we should too.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Sensor support was added for the Steam Deck previously, but Steam
Controller sensor events were never added. This adds that missing support,
bringing Steam Controller support much closer to feature parity with things
like SDL and Steam itself.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
SETTING_MOUSE_POINTER_ENABLED was renamed to SETTING_LIZARD_MODE upstream.
SETTING_GYRO_MODE was renamed to SETTING_IMU_MODE in an older commit, but
the associated enum was overlooked.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This switches from a parsing style where each button or axis is parsed
individually out of a report using !!(byte & BIT(x)) style. This commit
switches it to a mostly unified approach of defining a list of individual
mappings in an array and passing it to a function that handles all of the
extraction. Theoretically this is more lines, but in practice it results in
(subjectively) cleaner code. Some exceptions still need to be made for
things like handling the lizard mode toggle key, but in general there's a
lot less manual code.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Mark myself as the maintainer, as well as adding myself as an author.
It also makes some minor updates to comments, such as correcly calling the
left menu key view and retroactively renaming the original Steam Controller
as Steam Controller (2015), in preparation for support for the 2026 model.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
roccat_report_event() duplicates each report with kmemdup() and stores
the allocation in a circular-buffer slot. The allocation is released only
when that slot is reused.
The device destruction paths free struct roccat_device without releasing
reports still stored in cbuf[]. This makes those allocations unreachable
and leaks up to ROCCAT_CBUF_SIZE report buffers per device.
Add a small destructor that frees every buffered report before freeing the
device, and use it in both paths that can destroy a registered device.
Fixes: 206f5f2fcb5f ("HID: roccat: propagate special events of roccat hardware to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Refine recover flow:
1. Use workqueue to handle recover flow instead of processing in irq
handler.
2. Call thc_rxdma_reset() API to simplify the recover operation.
3. Disable interrupt during whole recover flow.
4. If recover fails, disable interrupt to avoid interrupt storm.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Refine recover flow:
1. Use workqueue to handle recover flow instead of processing in irq
handler.
2. Call thc_rxdma_reset() API to simplify the recover operation.
3. Disable interrupt during whole recover flow.
4. If recover fails, disable interrupt to avoid interrupt storm.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add a helper function thc_rxdma_reset() to do read DMA reset, it can be
called when fatal DMA error happens.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When i2c-hid fails to read the HID report descriptor during device
initialization, the error message prints as:
hid (null): reading report descriptor failed
The HID device name is set in hid_add_device() after calling
hdev->ll_driver->parse(), so when i2c_hid_parse() fails and calls
hid_err(), the device name has not been set yet, resulting in "(null)"
output.
Use dev_err(&client->dev, ...) instead of hid_err(hid, ...) because
the I2C client device is fully initialized with a proper name, providing
meaningful error messages for debugging.
Before: hid (null): reading report descriptor failed
After: i2c_hid i2c-TPD0001:00: reading report descriptor failed
Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation")
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech G915 TKL has a lightspeed receiver with a product id of
0xc545. This receiver seems to behave like 0xc547 receiver.
Add a definition for this new receiver id and a mapping for the
recvr_type_gaming_hidpp_ls_1_3 type, the receiver now reports battery
status of the connected keyboard.
Signed-off-by: Colin Blower <colin@1101b.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Endorfy Thock TKL Wireless uses the same device ID as an
Apple keyboard (05ac:024f), but its F1-F12 function keys do
not work correctly by default.
Adding two entries to the non-apple keyboard list:
one for Bluetooth mode, identified as "Thock TKL Wireless"
one for 2.4GHz wireless mode, identified as "USB Dongle"
Signed-off-by: Michal Slustik <michal.slustik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
