| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The max packet size is smaller than the max transfer size, as we only
have a u8 length field in the transport header.
Add a define for the maximum representable length, and use that for our
check. Use this for the MTU maximum calculation too.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260724-dev-mctp-usb-1-1-v5-2-e66bbba0dbdc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DSP0283 v1.1.0 will introduce larger maximum packet sizes. In
preparation, indicate that the current maxima are specific to v1.0.x.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260724-dev-mctp-usb-1-1-v5-1-e66bbba0dbdc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Documentation build fix for bd71828
- max17040: handle missing status supplier
- macsmc: Support macOS 27 SMC firmware
- bq25890: fix the -10 C NTC lookup entry
* tag 'for-v7.2-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq25890: fix the -10 C NTC lookup entry
power: supply: macsmc: Support macOS 27 SMC firmware
power: supply: max17040: handle missing status supplier
power: supply: bd71828: add a terminating table border
|
|
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes.
Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel")
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Reported-by: Samu <nomomentomori@gmail.com>
Suggested-by: Samu <nomomentomori@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Reported-by: Runa Takemoto <takemotoruna223@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table.
Fixes: 8510a043d334 ("ksmbd: increment reference count of parent fp")
Reported-by: Yunseong Kim <yunseong.kim@est.tech>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
pdsc_check_pci_health() queues pci_reset_work when it sees a broken PCI
connection, and nothing cancels it. When the PCI core starts AER
recovery, pdsc_pci_error_detected() runs pdsc_reset_prepare() and
recovers the device, but a pci_reset_work queued just before is left
pending. If it runs after recovery released the device lock, it resets a
device the driver now considers healthy, bouncing the link for no reason.
Cancel pci_reset_work in pdsc_pci_error_detected() after
pdsc_reset_prepare(), which has already stopped the health thread so it
cannot requeue the work. cancel_work_sync() is safe under the device
lock here because pdsc_pci_reset_thread() uses pci_try_reset_function(),
which returns instead of blocking on the lock. Only PFs initialize
pci_reset_work, so guard the cancel with !is_virtfn.
Fixes: 81665adf25d2 ("pds_core: Fix pdsc_check_pci_health function to use work thread")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260714180223.1642792-2-nikhil.rao%40amd.com?part=1
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727170030.361116-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit d9407ff11809 ("pds_core: Prevent health thread from running
during reset/remove") stops the health thread with cancel_work_sync()
before a reset, but a devcmd timeout during pdsc_fw_down() re-queues
health_work, so pdsc_health_thread() runs again mid-reset and double
allocates the core DMA queues via pdsc_fw_up().
Only the reset path is affected: on remove PDSC_S_STOPPING_DRIVER gates
the health thread and the workqueue is destroyed.
Use disable_work_sync() to cancel health_work and block further
queue_work() on it, and enable_work() in pdsc_restart_health_thread() to
re-allow it after the reset.
disable_work_sync() keeps a disable depth, so every disable must be
matched by one enable. pdsc_reset_prepare() stops the health thread and
pdsc_reset_done() restarts it. On the AER path pdsc_pci_error_detected()
calls pdsc_reset_prepare(), then pdsc_pci_error_resume() re-inits via
pci_reset_function_locked() (pds_core has no .slot_reset handler), which
runs the pair again - stopping the thread twice but restarting it once.
Gate the disable and enable on a health_stopped flag so each fires at
most once per stopped/running transition.
Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727164548.359562-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is
deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring
ESW devcom lock without condition. In addition, in case of peer_flow,
__mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock.
This results in an AA deadlock.
To fix this, introduce a new PEER flag that is set on flows created as
peer flows (the duplicate flows on peer devices), and check it in
mlx5e_tc_del_flow() before acquiring ESW devcom lock.
Lockdep splat:
============================================
WARNING: possible recursive locking detected
============================================
Possible unsafe locking scenario:
CPU0
----
lock(&comp->lock_key#2);
lock(&comp->lock_key#2);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_deadlock_bug.cold+0xbd/0xca
__lock_acquire+0x1671/0x2ec0
lock_acquire+0x10e/0x2e0
down_read+0x95/0x430
mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core]
mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core]
mlx5e_flow_put+0x99/0x100 [mlx5_core]
__mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core]
mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core]
mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core]
mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core]
tc_setup_cb_add+0x1dc/0x470
fl_change+0x2f4d/0x626d [cls_flower]
tc_new_tfilter+0x79b/0x2310
rtnetlink_rcv_msg+0x778/0xad0
do_syscall_64+0x70/0x960
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260728044338.2271143-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work.
Fixes: 937317c7c109 ("enic: do hang reset only in case of tx timeout")
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260728062730.2394873-1-satishkh@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f90c ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f90c. Compile-tested.
Fixes: 75c65772c3d1 ("net/packet: Ask driver for protocol if not provided by user")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260724144015.63219-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace silent WARN_ON_ONCE with WARN_ONCE that prints the actual error
code from bpf_trampoline_unlink_prog(). This aids debugging of race
conditions during link teardown, while keeping the warning rate limited
to avoid log flooding.
This will be very helpful for speeding up trouble-shooting of some crash
UAF due to bpf_trampoline_unlink_prog failures.
No change to unlink behavior.
Signed-off-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260729141159128mEJmS_aujBKr-cBu1p_UI@zte.com.cn
|
|
We should either have net_iov or page backed frags in a single skb,
otherwise it blows up down the stack. Don't allow mixing in
zerocopy_fill_skb_from_devmem().
Fixes: bd61848900bff ("net: devmem: Implement TX path")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/e3199788c4732545627a4721097ebb71ad737bab.1785150502.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception
Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision.
Fixes: d0e81b7e2246 ("bonding: Acquire correct locks in alb for promisc change")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260725233930.2957317-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 24dd377a76b0 ("wan: wanxl: switch from 'pci_' to 'dma_' API")
this has been dead code anyways. The pci_map_single() function it attempts
to redefine has been removed in commit 7968778914e5 ("PCI: Remove the
deprecated "pci-dma-compat.h" API").
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20260709151401.GO1364329@horms.kernel.org
Signed-off-by: Bence Csokas <bence.csokas@arm.com>
Link: https://patch.msgid.link/20260727-wanxl-cleanup-v2-1-3826430829c9@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit a8065af3346ebd7c76ebc113451fb3ba94cf7769.
Per the USB4 spec, a Transmit Descriptor Ring with E2E flow control
disabled does not require any credits to be available before the Host
Interface Adapter Layer transmits a tunneled packet from it. Once E2E is
enabled on that ring the controller must first obtain end-to-end
credits.
The ASMedia ASM4242 USB4 host router (PCI 1b21:2425) never delivers
those credits. The controller does accept the configuration: reading the
ring OPTIONS register back right after tb_ring_start() returns exactly
what was written, including RING_FLAG_E2E_FLOW_CONTROL (bit 28) and the
E2E HopID field. No credit ever arrives though, so the Tx ring's
hardware consumer index never advances and the link carries no traffic
at all.
Measured on two hosts connected point to point, onboard ASM4242 on MSI
X870E and X870, v6.17, stock drivers/net/thunderbolt/main.c with only
this revert applied on top:
before: 100% packet loss to the peer; thunderbolt0 is up and the
XDomain handshake completes ("new host found"), but iperf3
fails with "No route to host" once the neighbour entry
expires
after: 0% packet loss, 0.28 ms RTT; iperf3 4.21 Gb/s one way and
5.17 Gb/s the other (5 runs each, stddev <= 0.02), 1
retransmit in 10 s
An instrumented build additionally showed a frozen-Tx-consumer watchdog
firing ~30k times in a 10 s window before this change.
Rx-side E2E is not touched by this revert, so peers that do return
credits keep receive-side flow control.
ASMedia does not look like an isolated case. The out-of-tree
thunderbolt-ibverbs project disables native E2E on AMD NHI by default,
noting that "Strix Halo has reproduced TX completion wedges with
multiple native E2E rings active" -- the same failure mode, on a
different vendor. Since the driver has no way to tell in advance which
host router returns the credits, going back to the previous behaviour
looks safer than adding a quirk per affected part; Tx-side E2E can be
reintroduced as an opt-in for controllers that are known to implement
the credit return.
Note that the reverted commit was not fixing a reported problem, it was
derived from the spec wording alone, so this revert is not expected to
regress a known workload. Cc'ing the original author in case there was
one.
Fixes: a8065af3346e ("net: thunderbolt: Enable end-to-end flow control also in transmit")
Cc: zhangjianrong <zhangjianrong5@huawei.com>
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260727123002.25225-1-fy15309206903@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jack Ma says:
====================
net: nexthop: per-nexthop UDP dst port for fdb (VXLAN) nexthops
FDB nexthops let a VXLAN fdb entry point at a group of remote VTEPs, with the
kernel flow-hashing across the group (commit 1274e1cc4226 ("vxlan: ecmp support
for mac fdb entries")). Each leg carries its own remote IP, but the UDP
destination port is always taken from the VXLAN device (vxlan->cfg.dst_port)
and cannot be set per leg.
This series adds an optional per-nexthop UDP destination port for fdb nexthops,
so a group's legs can share a remote IP and differ only in UDP port.
Motivation
The deployment runs an overlay in which each tenant's traffic is terminated by
a "forwarder": a pod that hosts the VXLAN VTEP, decapsulates the tenant's
overlay, and relays it to and from that tenant's workload. Forwarders for many
different tenants are packed onto the same receiver node behind one
mesh-routable underlay IP, and are demultiplexed purely by UDP destination
port. The host does a stateless outer-UDP demux by port; it never terminates
the tunnel:
receiver node -- one mesh-routable underlay IP (NodeIP_A)
+----------------------------------------------------+
| host netns: stateless outer-UDP demux by dst port |
| (host does NOT terminate the tunnel) |
| |
| dst :40000 dst :40001 dst :40002 |
| | | | |
| +-----v----+ +-----v----+ +-----v----+ |
| | pod0 ns | | pod1 ns | | pod2 ns | |
| | vxlan | | vxlan | | vxlan | |
| | VTEP | | VTEP | | VTEP | |
| | decap | | decap | | decap | |
| +----------+ +----------+ +----------+ |
+----------------------------------------------------+
(up to ~10 forwarder pods packed per node)
The packed pods are unrelated: each belongs to a different tenant on its own
VXLAN VNI, so the per-pod UDP port is node-level demux, not an HA construct.
The host, which only demuxes outer UDP, never has to reason about tenancy.
A single forwarder is made highly available by running replicas. The replicas
of one forwarder share a single anycast overlay identity: one inner MAC and IP.
Clients address that one identity, and a sender spreads flows across the live
replicas with an fdb nexthop group. Failover is transparent: a dead replica is
just dropped from the group, with no client re-resolution or route change. The
single identity is deliberate; the endpoint is consumed one layer up as a
single stable address, so giving each replica its own address would push
multi-address handling and health-checking up into that consumer.
Anti-affinity keeps the two replicas of one HA set on different nodes, so a
group's legs land on distinct node IPs. But each leg is still reachable only
at (node IP, that pod's UDP port), so within one group the legs differ in IP
*and* port. A group can already carry a distinct IP per leg, but it takes the
UDP port from the device (a single value), so it cannot send each leg to its
own port. That is the gap this series closes.
Zooming into one forwarder pod, there is nothing for the host to load-balance:
the tunnel terminates on a vxlan device inside the pod's own netns, and the pod
reaches its tenant through a separate NIC:
one forwarder pod -- its own netns, tenant VNI X
+-------------------------------------------------+
| |
| on/off-ramp NIC <--- customer data plane |
| | on-ramp (ingress) / off-ramp (egress) |
| | inner packet |
| vxlan (VTEP) encap / decap for VNI X, |
| | listens on this pod's UDP port |
| | outer VXLAN UDP |
| eth0 (underlay) NodeIP:port |
| | to peer VTEPs over the |
| v mesh underlay |
| |
+-------------------------------------------------+
Existing mechanisms do not fit this shape:
- L3 multipath in the overlay needs each leg to be a distinct routable
nexthop with its own address. Since an HA set is a single anycast address
by design, there are no distinct per-leg addresses to route over; the fdb
nexthop group bridging to that shared MAC is what load-balances.
- Host-side fan-out (XDP / TC / SO_REUSEPORT) assumes a shared host datapath
that is not there. SO_REUSEPORT balances sockets within one netns, but the
receivers are in different netns (in fact different tenants). An XDP/TC
fan-out would require the host to terminate the tunnel and re-dispatch
inner traffic across netns and VNI boundaries, i.e. become a VTEP, which
puts the host into the tenant datapath and largely duplicates what an fdb
nexthop group already does.
- Demuxing on VNI instead of port (one shared 4789 socket, multiple vxlan
devices differing only in VNI, moved into each pod's netns) works when the
co-located pods have different VNIs. It does not help two same-VNI HA sets
on one node: their outer headers are identical, so the host would again
have to terminate the tunnel to tell them apart. It also costs packing
density: with one shared underlay IP, VNI demux allows at most one VTEP per
(VNI, node), so N same-VNI HA sets of two replicas need 2N nodes, whereas a
per-pod port fits them on two nodes with anti-affinity preserved.
This series adds the attribute:
- Patch 1 adds a netlink attribute NHA_DST_PORT (__be16, mirroring NDA_PORT),
stored in struct nh_info and echoed back on dump. It is only accepted
together with NHA_FDB and NHA_GATEWAY. Control-plane only; datapath
behaviour is unchanged.
- Patch 2 wires it into the VXLAN datapath: vxlan_fdb_nh_path_select() sets
rdst->remote_port to the selected leg's port. vxlan_xmit_one() already
prefers rdst->remote_port when non-zero and otherwise falls back to the
device port, so nexthops without a port are unaffected (backward
compatible).
- Patch 3 extends the fdb nexthop selftests.
On the uAPI: this does not add a new datapath concept. A single fdb entry
already carries a per-destination UDP port (NDA_PORT), and vxlan_xmit_one()
already prefers rdst->remote_port when set. NHA_DST_PORT is the nexthop analog
of that existing attribute: control-plane only, no datapath change, and
backward compatible (a leg with no port falls back to the device port as
today). It sits at the nexthop level rather than under NHA_ENCAP because fdb
nexthops do not use the NHA_ENCAP / LWT infrastructure.
Example:
ip nexthop add id 1 via 192.0.2.10 fdb dst_port 4789
ip nexthop add id 2 via 192.0.2.10 fdb dst_port 5789
ip nexthop add id 10 group 1/2 fdb
bridge fdb add 00:11:22:33:44:55 dev vxlan0 nhid 10
Both legs share gateway 192.0.2.10 and differ only in UDP port; the kernel
hashes flows across them.
====================
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-0-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add coverage for the new per-nexthop VXLAN destination port
(NHA_DST_PORT).
In fib_nexthops.sh, new ipv4_fdb_port_fcnal() and ipv6_fdb_port_fcnal()
tests check that a dst_port is accepted on an fdb nexthop that has a
gateway and echoed back on dump, that it is rejected without a gateway
and rejected when zero, that a group may hold legs that differ only in
UDP port, and that a portless fdb nexthop omits the attribute. The
tests SKIP when iproute2 lacks the "dst_port" keyword.
In test_vxlan_nh.sh, basic_tx_common() gains a second fdb nexthop group
whose nexthop carries a destination port that differs from the VXLAN
device default, plus a flower filter keyed on that port, to confirm the
per-nexthop port is used on the wire. The test now requires an iproute2
with dst_port support.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-3-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an fdb entry points at a nexthop group, vxlan_fdb_nh_path_select()
resolves the selected leg's remote IP but leaves the UDP destination port
at the device default (vxlan->cfg.dst_port).
Extend nexthop_path_fdb_result() to also return the selected nexthop's
NHA_DST_PORT (0 when unset) and have vxlan_fdb_nh_path_select() store it
in rdst->remote_port. vxlan_xmit_one() already prefers rdst->remote_port
when non-zero and falls back to the device port otherwise, so nexthops
without a port are unaffected.
This lets one fdb nexthop group load-balance a flow across legs that
share an underlay IP but differ in UDP destination port.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-2-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") lets a
single inner MAC be reached through a group of remote VTEPs, with the
kernel flow-hashing across the group members. Each member carries its
own remote IP, but the UDP destination port is always taken from the
VXLAN device (vxlan->cfg.dst_port) and cannot be set per member.
Some deployments pack several receivers behind one underlay IP and tell
them apart by UDP port, so they need a per-nexthop destination port to
spread flows across (IP, port) tuples rather than IP alone.
Add a netlink attribute NHA_DST_PORT (__be16, mirroring NDA_PORT) that
carries an optional UDP destination port on an fdb nexthop. It is only
accepted together with NHA_FDB and NHA_GATEWAY; it is stored in struct
nh_info and echoed back on dump. The attribute is named generically
rather than fdb-specific so it can be reused should another nexthop type
ever need a destination port. This patch is control-plane plumbing
only; the VXLAN datapath is wired up in a follow-up patch, so behaviour
is unchanged for now.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-1-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget
setup we would double decrement the use_count of the widget because the
sof_widget_free_unlocked() would be called twice, similarly the core_put
would be invoked twice as well.
Since the use_count and core_put() is handled within the widget_free
function we need to return without falling through the pipe_widget_free
label.
The fixes tag is picked to the last change around this part of the code
which is adequately old enough for backporting purposes.
Link: https://github.com/thesofproject/sof/issues/10826
Fixes: 31ed8da1c8e5 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260730085914.27546-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add one missing kernel-doc description and drop one that shouldn't be
here in order to avoid kernel-doc warnings:
Warning: ./drivers/nvdimm/btt.h:232 struct member 'nd_region' not described in 'btt'
Warning: ./drivers/nvdimm/btt.h:232 Excess struct member 'lanes' description in 'btt'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260721172132.3718892-2-rdunlap@infradead.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
|
|
Add missing struct member, function parameters, and function return
values to eliminate all kernel-doc warnings:
Warning: include/linux/nd.h:124 struct member 'common' not described in 'nd_namespace_io'
Warning: include/linux/nd.h:124 Excess struct member 'dev' description in 'nd_namespace_io'
Warning: include/linux/nd.h:166 function parameter 'flags' not described in 'nvdimm_read_bytes'
Warning: include/linux/nd.h:166 No description found for return value of 'nvdimm_read_bytes'
Warning: include/linux/nd.h:185 function parameter 'flags' not described in 'nvdimm_write_bytes'
Warning: include/linux/nd.h:185 No description found for return value of 'nvdimm_write_bytes'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260721172132.3718892-1-rdunlap@infradead.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
|
|
Decode and print out the content of currently supported RESOURCE_EVENT
notifications from firmware along with the needed data structures and
definitions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730082444.4828-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dedicated driver data for the Eliza CDSP remote processor. It looks
almost the same as for Milos, except Eliza needs region assign.
Tie the new driver data to the Eliza specific compatible.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260722-remoteproc-eliza-cdsp-v4-2-04c6eee70cb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document compatible string for the CDSP Peripheral Authentication Service
on the Eliza SoC. It is not compatible with any other.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260722-remoteproc-eliza-cdsp-v4-1-04c6eee70cb1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is
accessed without holding any locks. If the prog is concurrently replaced
via bpf_link_update, the old prog can be freed, leading to a potential
UAF issue.
Fix this by accessing link->prog under RCU protection to safely fetch
the pointer and guarantee its lifetime while reading its fields.
Fixes: 0c991ebc8c69 ("bpf: Implement bpf_prog replacement for an active bpf_cgroup_link")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/f87b53c0-8f00-45a6-82db-8242fa9b143f@huaweicloud.com [0]
Link: https://lore.kernel.org/bpf/20260728025457.2814876-1-pulehui@huaweicloud.com
|
|
In bpf_netns_link_update_prog, the checks for old_prog and prog type
are currently performed locklessly before acquiring netns_bpf_mutex.
This creates a race condition that can lead to a UAF issue.
If two threads concurrently execute BPF_LINK_UPDATE on the same netns
link, the following execution path can trigger a UAF:
CPU0 CPU1
bpf_netns_link_update_prog
if (old_prog && old_prog != link->prog)
return -EPERM;
bpf_netns_link_update_prog
if (old_prog && old_prog != link->prog)
...
old_prog = xchg(&link->prog, new_prog);
bpf_prog_put(old_prog);
if (new_prog->type != link->prog->type) <-- trigger UAF
Fix this by moving the old_prog and prog->type checks inside the
netns_bpf_mutex critical section. Meanwhile, use guard() to simplify
lock management and avoid all the goto jumping.
Fixes: 7f045a49fee0 ("bpf: Add link-based BPF program attachment to network namespace")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/f87b53c0-8f00-45a6-82db-8242fa9b143f@huaweicloud.com [0]
Link: https://lore.kernel.org/bpf/20260728023259.2813482-1-pulehui@huaweicloud.com
|
|
After setting a 100G optical port to 40G via ethtool and reloading
the driver, the port remains at 40G instead of reverting to the
firmware default speed of 100G.
The commit referenced in Fixes: added two overwrites in
hclge_init_ae_dev() for non-copper media, so that optical ports
connected to forced-mode remotes inherit the firmware-preset
autoneg and speed instead of the hardcoded defaults:
req_autoneg = mac.autoneg
req_speed = mac.speed (when autoneg disabled)
The autoneg overwrite keeps existing behavior:
hclge_set_autoneg_speed_dup() already uses mac.autoneg (not
req_autoneg) since it was introduced, so autoneg inheritance from
firmware was already in place. This part is kept.
The speed overwrite, however, introduces the residue: mac.speed
reflects whatever was last programmed into the MAC, and after unload
firmware does not restore the MAC speed to the flash default. So if
the user changed speed via ethtool in a prior load, mac.speed still
carries that value on reload and req_speed inherits it.
Fix by dropping the req_speed overwrite only. req_speed keeps the
firmware default value set in hclge_configure() (cfg.default_speed),
so a reload reverts the speed to default, matching the expectation
that a driver reload resets link configuration.
Trade-off: on optical ports whose firmware default speed does not
match a forced-mode remote, reload now drops the link and the user
must re-apply ethtool configuration. This is acceptable: a driver
reload is expected to reset link configuration, not to inherit
runtime state from before unload. The autoneg inheritance is left
in place as established behavior; changing it is out of scope for
this patch and would itself be a user-perceivable behavior change.
Fixes: d9d349c4e8a0 ("net: hns3: differentiate autoneg default values between copper and fiber")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260724093036.426631-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove needless ' ID)'
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Link: https://patch.msgid.link/20260722093259.3109588-2-manuelebnerli@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The parameters may be changed by the sof_sdw machine driver is the
SOC_SDW_PCH_DMIC quirk is set. Use the mach_params from the machine
driver to ensure the sof_sdw_get_tplg_files() function select the right
function topologies.
Fixes: 2fbeff33381c ("ASoC: Intel: add sof_sdw_get_tplg_files ops")
Cc: stable@vger.kernel.org
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730071724.22296-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/iommufd: Fix IOPF group ownership UAF
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd: Reject DMABUF pages from the access pin path
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
|
|
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.
Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.
Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).
This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.
Found by an in-house static analysis tool.
Fixes: 3950c7865cd7 ("charger-manager: Add support sysfs entry for charger")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260728030123.230202-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The qcom,imem binding describes a single word in always-on SRAM shared
between the operating system (OS) and boot firmware. Before DDR is
initialized on the warm reset following a crash, firmware reads this
word to decide where to deliver the minidump, and the OS is expected to
select one of the destinations: either USB upload to a host PC or save
to on-device storage. If nothing is selected by the OS, USB is the
default.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260624190830.3131112-3-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
CLIENT_VOTES_OFFSET (0x20) equals sizeof(struct sleep_stats), since
appended_stats immediately follows sleep_stats in the memory layout.
Replace the magic constant with sizeof(struct sleep_stats) to make
the layout relationship self-documenting and drop the macro.
No functional impact.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-b4b4-removed-unused-macros-v1-2-2883fecb9e6e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove macros that are defined but never used, as identified by
-Wunused-macros:
STAT_TYPE_OFFSET, COUNT_OFFSET, LAST_ENTERED_AT_OFFSET,
LAST_EXITED_AT_OFFSET, ACCUMULATED_OFFSET
No functional impact.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-b4b4-removed-unused-macros-v1-1-2883fecb9e6e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
To make sure the correct settings for a given DRAM configuration get
applied, attempt to retrieve that data from SMEM (which happens to be
what the BSP kernel does, albeit with through convoluted means of the
bootloader altering the DT with this data).
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260727-topic-smem_dramc-v5-3-66188b3e338d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Most modern Qualcomm platforms (>= SM8150) expose information about the
DDR memory present on the system via SMEM.
Details from this information is used in various scenarios, such as
multimedia drivers configuring the hardware based on the "Highest Bank
address Bit" (hbb), or the list of valid frequencies in validation
scenarios...
Add support for parsing v3-v7 version of the structs. Unforunately,
they are not versioned, so some elbow grease is necessary to determine
which one is present. See for reference:
ver 3: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/1d11897d2cfcc7b85f28ff74c445018dbbecac7a
ver 4: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/f6e9aa549260bbc0bdcb156c2b05f48dc5963203
ver 5: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/617d3297abe8b1b8dd3de3d1dd69c3961e6f343f
ver 5 with 6regions: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/d770e009f9bae58d56d926f7490bbfb45af8341f
ver 6: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/62659b557fdb1551b20fae8073d1d701dfa8a62e
ver 7: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/734d95599c5ebb1ca0d4e1639142e65c590532b7
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/commit/1d11897d2cfcc7b85f28ff74c445018dbbecac7a
Link: https://lore.kernel.org/r/20260727-topic-smem_dramc-v5-2-66188b3e338d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
- Fix potential integer overflows in audit_log_n_string()
Similar to the earlier fix to audit_log_n_hex() that you merged
earlier in July. Expect a cleaner, and generally better fix for these
functions in an upcoming merge window, but this addresses the problem
in a small patch that should be easy for people to backport.
- Fix potential use-after-free in audit_del_rule()
* tag 'audit-pr-20260730' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential use-after-free in audit_del_rule()
audit: fix potential integer overflow in audit_log_n_string()
|
|
The USB notifier and initial charger detection can schedule info->work.
The remove path unregisters the notifier, but does not cancel queued or
running work before the devm-allocated driver data is released.
Set the platform drvdata used by remove, then cancel the work after
unregistering the notifier.
This issue was found by a static analysis tool.
Fixes: 8ac1091ed18b ("power: supply: sc2731_charger: Add one work to charge/discharge")
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://patch.msgid.link/5d48b827687168cb1b1bfe85f17945566b42829d.1785321763.git.getshell@seu.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The USB notifier and initial VBUS detection can schedule isp->work. The
remove path unregisters the notifier and power supply, but does not wait
for queued or running work before tearing down the power supply state.
Cancel the work after unregistering the notifier. Do this before
unregistering the power supply.
This issue was found by a static analysis tool.
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://patch.msgid.link/20260728123423.781-5-getshell@seu.edu.cn
Fixes: ec46475f3e31 ("power_supply: Add isp1704 charger detection driver")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
iommu-map entries
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 4559b435f741 ("arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: Add TC9563 PCIe switch node for PCIe0")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-22-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 267643b3e3a4 ("arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-21-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
entries
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 1cde54c54b83 ("arm64: dts: qcom: qcs6490: Add Thundercomm AI Mini PC G1 IoT")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-20-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider apps_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: ef254b12ec60 ("arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-19-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: b64abb26a291 ("arm64: dts: qcom: lemans-evk: Add IFP Mezzanine")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-18-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 5a67924d2fc5 ("arm64: dts: qcom: monaco-evk: Add IFP Mezzanine")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-17-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 5238f4e7169f ("arm64: dts: qcom: Add Monaco Monza SoM")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-16-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 46a7c01e7e9d ("arm64: dts: qcom: qcs8300: enable pcie0")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-15-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The IOMMU provider pcie_smmu uses '#iommu-cells = <2>', but the PCIe
iommu-map entries specify only one cell for the SID, omitting the SID
mask. This went unnoticed until the OF core started warning with commit
ccb2fd725d41 ("of: Respect #{iommu,msi}-cells in maps"):
iommu-map has 1-cell entries targeting 2-cell #iommu-cells, treating as 1-cell output
So fix the entries to match the provider's '#iommu-cells' property.
Fixes: 489f14be0e0a ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260730-iommu-map-fix-v1-14-83405d37ba41@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
