| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- Drop CONFIG_CRYPTO_CAMELLIA=m, CONFIG_CRYPTO_CTS=m,
CONFIG_CRYPTO_CMAC=m, CONFIG_CRYPTO_SHA1=m, and
CONFIG_CRYPTO_SHA512=m (auto-enabled since commit bf8672b99402abd8
("SUNRPC: Add Kconfig dependency on CRYPTO_KRB5")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/9842659245b4b16187fab67813cc98217d8a7036.1783937585.git.geert@linux-m68k.org
|
|
Remove the redundant amiga_reset() prototype and mark the first one as
__noreturn instead.
Tested-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260629120426.680032-4-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the real world, it seems unlikely to cause an
actual problem. It is a read not a write so it can't corrupt any
memory. However, it could potentially fall off the end of a page and
cause an accvio bug.
Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Expósito <jose.exposito89@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: John Harrison <John.Harrison@Igalia.com>
Link: https://patch.msgid.link/20260723220652.533345-1-John.Harrison@Igalia.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Any new DTS code should pass dt-check-style 'relaxed' mode without
warnings and should have addressed most of applicable 'strict' mode
ones.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260803091740.232536-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update the git tree URL for DMA MAPPING HELPERS to point to the
maintainer's repository on kernel.org and remove the obsolete web
page reference to the old infradead.org tree.
Reported-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
The RZ/G3E CRU programs the line stride via the AMnIS register, whose
IS field encodes the value in units of 128 bytes. If bytesperline is
not a multiple of 128, the division truncates and the hardware uses a
wrong stride, causing horizontal banding.
Commit ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
replaced the open-coded aligned calculation with v4l2_fill_pixfmt(),
which sets no alignment, reintroducing the issue.
Round bytesperline up to RZG2L_CRU_STRIDE_ALIGN and recompute
sizeimage when info->has_stride is set. RZ/G2L has no AMnIS register
and keeps the values from v4l2_fill_pixfmt() unchanged.
Fixes: ace92ccef0c9 ("media: platform: rzg2l-cru: Use v4l2_fill_pixfmt()")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode
remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an
endpoint parse or add fails partway through the loop, it jumps to
err_parse and returns without calling v4l2_async_nf_cleanup(), leaking
every v4l2_async_connection already added to the notifier's waiting
list.
The register-failure path just below already cleans up correctly, and
the caller only tears the notifier down (isys_notifier_cleanup()) once
isys_notifier_init() has returned success. Clean up the notifier on the
parse error path too.
Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.
As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
corruption and a use-after-free the next time the list is walked.
The remove path already does the right thing by calling
isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on
the probe error path so the notifier is unregistered and cleaned up
before the device is torn down.
Fixes: a516d36bdc3d ("media: staging/ipu7: add IPU7 input system device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Convert s390's preempt_count to 64 bit, and change the preempt
primitives accordingly.
[boqun: Apply the corrected comment for asm block]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-13-boqun@kernel.org
|
|
Arm64 already uses 64-bit preempt count and the need reschedule bit is
maintained in a separate 32-bit word from the preempt count. Therefore
preempt count has enough bits to represent 16 levels of NMI nesting,
hence enable it for arm64. This saves a per-CPU variable and additional
instructions in the NMI path.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-12-boqun@kernel.org
|
|
With the changes that enable preempt count to track IRQ disabling
nesting, we don't have enough bits in 32-bit preempt count
implementation, as a result we move NMI nesting bits out of the 32-bit
preempt count. However on the architectures that can support 64-bit
preempt count implementation, we can keep the NMI nesting bits in the
32-bit preempt count and avoid maintaining NMI nesting bits outside of
the same cache line.
Therefore HAS_SEPARATE_PREEMPT_RESCHED_BITS is introduced to allow
architectures to select this. Note that under this Kconfig, preempt
count is maintained in a 64-bit word however preempt_count() still
remains as an int because all the effective bits still fit in
(previously we mask out NEED_RESCHED bit in preempt_count()). This
should make no functional changes for existing preempt_count() users.
Enable this for x86_64 along with the introduction of the Kconfig.
[boqun: Undo the __preempt_count_{add,sub}() optimization in 32-bit
preempt count since it may introduce {over,under}flow]
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-11-boqun@kernel.org
|
|
Currently preempt_count() is always a non-negative int on all archs
(PREEMPT_NEED_RESCHED archs will mask out the MSB when returning
preempt_count()), hence the checking in __cant_migrate() is in fact just
checking whether preempt_count() is 0 or not. In a future change, we are
going to use all the 32 bits of preempt_count(), which would make
negative int values possible from preempt_count(). Therefore convert the
"> 0" comparison into a zero check to prepare for the future change.
No functional changes are intended.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-10-boqun@kernel.org
|
|
The preempt_offset is always 0 in all the callsites of __cant_sleep(),
hence remove it. It also allows us to clear up the code a bit by
no longer using a "preempt_count() > .." comparison.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-9-boqun@kernel.org
|
|
The semantics of various IRQ disabling guards match what
*_irq_{disable,enable}() provide, i.e. the interrupt disabling is
properly nested, therefore it's OK to switch to use
*_irq_{disable,enable}() primitives.
[boqun: Adjust the user-side changes in do_sched_cfs_*_timer() provided
by Peter and Lyude]
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-8-boqun@kernel.org
|
|
While making changes to the refcounted interrupt patch series, at some
point on my local branch I broke something and ended up writing some kunit
tests for testing refcounted interrupts as a result. So, let's include
these tests now that we have refcounted interrupts.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-7-boqun@kernel.org
|
|
Currently the nested interrupt disabling and enabling is represented by
_irqsave() and _irqrestore() APIs, which are relatively unsafe, for
example:
<interrupts are enabled as beginning>
spin_lock_irqsave(l1, flag1);
spin_lock_irqsave(l2, flag2);
spin_unlock_irqrestore(l1, flags1);
<l2 is still held but interrupts are enabled>
// accesses to interrupt-disable protected data will cause races
This is even easier to trigger with guard facilities:
unsigned long flag2;
scoped_guard(spin_lock_irqsave, l1) {
spin_lock_irqsave(l2, flag2);
}
// l2 locked but interrupts are enabled.
spin_unlock_irqrestore(l2, flag2);
(Hand-to-hand locking critical sections are not uncommon for a
fine-grained lock design)
And because of this unsafety, Rust cannot easily wrap the
interrupt-disabling locks in a safe API, which complicates the design.
To resolve this, introduce a new set of interrupt disabling APIs:
* local_interrupt_disable();
* local_interrupt_enable();
They work like local_irq_save() and local_irq_restore() except that 1)
the outermost local_interrupt_disable() call saves the interrupt state
into a per-CPU variable, so that the outermost local_interrupt_enable()
can restore the state, and 2) a per-CPU counter is added to record the
nest level of these calls, so that interrupts are not accidentally
enabled inside the outermost critical section.
Also add the corresponding spin_lock primitives: spin_lock_irq_disable()
and spin_unlock_irq_enable(), as a result, code as follows:
spin_lock_irq_disable(l1);
spin_lock_irq_disable(l2);
spin_unlock_irq_enable(l1);
// Interrupts are still disabled.
spin_unlock_irq_enable(l2);
doesn't have the issue that interrupts are accidentally enabled.
This also makes the wrapper of interrupt-disabling locks on Rust easier
to design.
[boqun: Apply Peter's feedback and fix spell errors reported by Ingo]
[boqun: Address the duplicate spin_acquire() spotted by sashiko]
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804182657.87716-1-boqun@kernel.org
|
|
isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.
Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered.
Fixes: 4e5e7a7ddb4a ("media: platform: amd: isp4 subdev and firmware loading handling added")
Assisted-by: Claude:claude-opus-4-8 smatch
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Reviewed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence.
If one of them fails, it jumps to error_no_memory and returns -ENOMEM
without releasing the pools that were already allocated, leaking them.
Release the already-allocated pools before returning. isp4if_gpu_mem_free()
is a no-op on pools that were not allocated, so calling
isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that
succeeded.
isp4if_gpu_mem_free() previously logged an error for a NULL entry, which
is a normal case during partial-allocation cleanup, so make it silent.
Fixes: 4c5feef6a62c ("media: platform: amd: Add isp4 fw and hw interface")
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Reviewed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/arm
soc: OMAP2 updates for v7.3
- minor fixes
* tag 'omap-for-v7.3/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: OMAP2+: Fix OF node reference leaks in omap_hwmod
ARM: OMAP2+: Add CFI type for omap4_finish_suspend
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
arm64: Xilinx SOC changes for 7.3
firmware:
- Feature check improvements
- Clean up firmware and EL3 state on kexec
soc:
- Remove redundant dev_err()
* tag 'zynqmp-soc-for-7.3' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
soc: xilinx: Remove redundant dev_err()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If the algorithm name is found in the allowlist and the privilege check
doesn't pass, there's no need to consider remaining entries since the
list contains (and is intended to contain) at most one entry per name.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It isn't obvious what false/true mean at the definition sites, so let's
replace it with flags instead. Also flip the polarity to make the
default zero-initialized value be the secure (privileged-only) value.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
So far the only reported use cases for cbc(paes) have involved processes
running as root. Therefore, make af_alg_restrict=1 allow only
privileged use of this algorithm for now.
Fixes: 947d62c09436 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RNGC clock is enabled manually before runtime PM is configured. If
devm_hwrng_register() fails, probe returns without disabling the clock.
The devm_pm_runtime_enable() cleanup only disables runtime PM and does not
call imx_rngc_suspend().
Disable the clock before returning from this failure path.
Fixes: 7a96a64e8689 ("hwrng: imx-rngc - add runtime pm")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ADF_HEX value type is defined in the adf_cfg_val_type enum and
handled in adf_cfg_add_key_value_param(), but no caller in the tree
uses it.
Remove the unused ADF_HEX enum value and its dead handling code.
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify the for loop's control flow and return the results directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Drop the redundant ret = -ENODEV initialization. Use a while loop and
reuse the local index variable i on the error path.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the interrupt acquisition from irq_of_parse_and_map() to
platform_get_irq(), which resolves the IRQ from the device's interrupts
property via of_irq_get(). Flip the error check from testing for zero to
testing for a negative errno, and drop the now-unused
caam_jr_irq_dispose_mapping() callback and its devm_add_action_or_reset()
cleanup, since platform_get_irq() manages the mapping internally.
Replace the open-coded platform_get_resource() plus devm_ioremap()
sequence with devm_platform_ioremap_resource(), which fetches the
resource, requests the region and maps it in one call.
Each fsl,sec-*-job-ring node has a distinct 0x10000 reg region and
interrupts property, so the region reservation added by
devm_ioremap_resource() is exclusive and does not introduce overlap
failures.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The driver uses devm_request_irq() for the IRQ, but cleans up the
tasklet and DMA rings inside the remove function. Since devres frees
the IRQ only after the remove function returns, a window exists where a
pending hardware interrupt can reschedule the tasklet after it has been
killed, leading to use-after-free of the descriptor rings.
Fix by switching to plain request_irq() and adding the corresponding
free_irq() calls in the remove function and the probe error path before
tasklet_kill(), ensuring the IRQ is fully torn down before the tasklet
is killed.
Rename goto error path to err_tasklet as that's more descriptive.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is already done on probe failure.
cesa_dev should be set to NULL as the driver checks that it is not and
errors saying that only one device is authorized.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the misspelling of 'validate' in crypto_ecdh_shared_secret() and
ecc_is_pubkey_valid_partial() documentation.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use plain C "/*" notation for comments that are not in kernel-doc format
to avoid kernel-doc warnings:
Warning: include/uapi/linux/psp-sfs.h:18 expecting prototype for SFS().
Prototype was for PAYLOAD_NAME_SIZE() instead
Warning: include/uapi/linux/psp-sfs.h:46 This comment starts with '/**',
but isn't a kernel-doc comment.
* Seamless Firmware Support (SFS) IOC
Fixes: 648dbccc03a0 ("crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Qualcomm Crypto Engine (QCE) driver currently lacks support for
runtime power management (PM) and interconnect bandwidth control.
As a result, the hardware remains fully powered and clocks stay
enabled even when the device is idle. Additionally, static
interconnect bandwidth votes are held indefinitely, preventing the
system from reclaiming unused bandwidth.
Address this by enabling runtime PM and dynamic interconnect
bandwidth scaling to allow the system to suspend the device when idle
and scale interconnect usage based on actual demand. Improve overall
system efficiency by reducing power usage and optimizing interconnect
resource allocation.
Signed-off-by: Udit Tiwari <udit.tiwari@oss.qualcomm.com>
Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the need to call irq_dispose_mapping as needed by
irq_of_parse_and_map().
Simplify the function as a result. No need for gotos anymore.
Add a missing free_irq.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In atmel_ecdh_generate_public_key(), drop the redundant return variable
and return -EINVAL and 0 directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Free the public key directly on I2C transaction failure and remove the
free_public_key label to simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Document the compatible string for inline crypto engine found
on the Qualcomm X1E80100 SoC, used by the Hamoa IoT EVK board.
Signed-off-by: Wenjia Zhang <wenjia.zhang@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.3
Freescale QUICC Engine:
- Use generic I/O helpers in interrupt controller for IO Ports
- Move CONFIG_QE_GPIO out of powerpc
- Fix DT scan for GPIO nodes
- Convert IO ports interrupt controller to generic IRQ chip
- Add support of IRQs in GPIO controller
- Implement get_direction() in GPIO controller
- Check platform_driver_register() in interrupt controller for IO Ports
Data Path I/O:
- Replace maintainer
- Remove redundant dev_err()
- Fix kernel-doc typos
Freescale Management Complex:
- Use strscpy() to copy strings into arrays
- Remove redundant dev_err()
- Drop unused assignment of acpi_device_id::driver_data
Other changes:
- Add kernel and device tree binding support for RCW override,
completing the SerDes PHY driver functionality
- Fix kernel-doc warnings and typos in DPAA header
* tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits)
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
soc: fsl: guts: use a macro to encode the DCFG CCSR space
soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup
soc: fsl: dpio: fix kernel-doc typos
soc: fsl: fix kernel-doc warnings and typos
bus: fsl-mc: Remove redundant dev_err()
soc: fsl: qe: Add support of IRQs in QE GPIO
soc: fsl: qe: Rename irq variable to parent_irq
soc: fsl: qe: Convert to generic IRQ chip
soc: fsl: qe: Handle spurious interrupts
soc: fsl: qe: Iterate over all pending interrupts in cascade handler
soc: fsl: qe: Use generic_handle_domain_irq()
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
fprobe_remove_ips() manually duplicates the unregister and filter-removal
logic for both graph and ftrace ops. Simplify it by delegating to the
existing fprobe_graph_remove_ips() and fprobe_ftrace_remove_ips() helpers.
Link: https://lore.kernel.org/all/178528139798.102586.5349128066643420018.stgit@devnote2/
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The futex state is used to prevent a waiter from attaching to the lock
owner while the owner runs the futex cleanup in exit() or exec().
Only the state transition from FUTEX_STATE_OK to FUTEX_STATE_EXITING must
be done with the task's pi_lock held, the transition away from
FUTEX_STATE_EXITING has no serialization requirements on the writer side,
but it's completely non obvious why. It's magically protected by
exit_pi_state(), which operates under tsk::pi_lock, as that's the state
which has to be correct when the waiter observes the new state.
OTOH, taking the pi_lock in futex_cleanup_end() is not a performance issue
because at that point the lock should be uncontended in the vast majority
of cases.
Aside of that the handling of FUTEX_STATE_EXITING in attach_to_pi_owner()
and handle_exit_race() is confusing at best.
Protect the store in futex_cleanup_end() with tsk::pi_lock, handle
FUTEX_STATE_EXITING in attach_to_pi_owner() explicitly and document how
this is supposed to work.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Kyle Zeng <kylebot@openai.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
|
|
A private futex key borrows the waiter's mm without taking an mm_users
reference. Nevertheless, attach_to_pi_owner() currently accepts an owner
from a different address space and copies the private key into the owner's
PI state.
When that owner exits, exit_pi_state_list() uses the saved key to find the
hash bucket and acquires a reference to the waiter's private hash. If the
last user of the waiter's mm exits concurrently, futex_hash_free() frees
the hash while the owner still uses its bucket and reference.
Prevent this by validating in attach_to_pi_owner() that, for private
futexes, the owner mm and waiter mm are the same. Perform the check with
the owner's pi_lock held and after validating owner::futex::state to
serialize against a concurrent PI-state exit cleanup.
[ tglx: Amended comment ]
Fixes: 80367ad01d93 ("futex: Add basic infrastructure for local task local hash")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Assisted-by: Codex:gpt-5.6-sol
Cc: stable@vger.kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers
Apple Soc driver updates for 7.3
- New driver and dt-bindings for Apple PMGR misc controls, which tweaks
various global power related states and saves about 1W of power on M1
Pro/Max/Ultra during s2idle.
- A small fix for device links in SART
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-drivers-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
soc: apple: Add driver for Apple PMGR misc controls
dt-bindings: soc: apple: Add Apple PMGR misc controls
soc: apple: sart: require device link for consumers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
domain_context_clear_one() and device_pasid_table_teardown() are both
invoked once per DMA alias of a device. Each function locates the context
entry using the bus/devfn pair provided by the pci_for_each_dma_alias()
callback, then calls intel_context_flush_no_pasid(), which constructs a
device-selective context-cache invalidation from info->bus and
info->devfn (that is, always the requester ID of the device itself).
As a result, for every alias other than the device’s own RID, the context
entry that was just cleared in memory is never invalidated in the context
cache. Hardware may continue using that stale cached entry. In the
scalable-mode teardown path, intel_pasid_free_table() can then free the
PASID directory still referenced by that stale entry, allowing the IOMMU
to walk freed memory.
Fix this by passing the source ID of the entry being torn down to
intel_context_flush_no_pasid(), instead of deriving it from @info.
Fixes: f90584f4beb84 ("iommu/vt-d: Add helper to flush caches for context change")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260602233426.357499-1-baolu.lu%40linux.intel.com
Assisted-by: Claude:claude-opus-5
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
intel_pasid_setup_sm_context() walks a PCI device’s DMA aliases via
pci_for_each_dma_alias() and programs a scalable-mode context entry for
each RID. For a device with a dma_alias_mask, the callback is invoked
once for the device’s own RID and once for each alias bit, all with the
same pci_dev, so device_pasid_table_setup() runs for multiple RIDs.
pci_for_each_dma_alias() stops at the first callback error. Therefore, a
failure partway through the walk can leave context entries for already
processed RIDs present and still pointing to the device’s PASID table.
On this error path, intel_iommu_probe_device() currently jumps directly
to intel_pasid_free_table(), which frees the PASID table without
first tearing down those context entries. The IOMMU may then walk a
present context entry whose PASID table pointer references freed
memory.
intel_iommu_release_device() already performs teardown before freeing the
table. Apply the same ordering on the probe failure path.
device_pasid_table_teardown() safely handles RIDs that were never
programmed: iommu_context_addr() returns NULL when no context table has
been allocated, and clearing the Present bit of an already non-present
entry is a no-op. So unwind is safe for both the alias that failed and
any aliases not yet reached.
Fixes: 301f1a80487fd ("iommu/vt-d: Setup scalable mode context entry in probe path")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260602233426.357499-1-baolu.lu%40linux.intel.com
Assisted-by: Claude:claude-opus-5
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
intel_iommu_attach_device() enables IOPF for the new domain but never
disables it for the old one. device_block_translation(), called at the
start of the function, tears down translation but does not touch any IOPF
state; blocking_domain_attach_dev() has to call iopf_for_domain_remove()
explicitly before invoking it for exactly this reason.
identity_domain_attach_dev() has the same problem. Its comment claims
that no PRI handling is needed because the device has been put in the
blocking state, but the blocking state and the IOPF reference count are
independent of each other.
As a result, replacing a domain that has an iopf_handler with another
domain at RID level leaks a reference in info->iopf_refcount. The count
never drops back to zero, so iopf_queue_remove_device() is never called
and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount)
when the device is released.
The PASID paths already handle this correctly by way of
iopf_for_domain_replace(); convert the two RID paths to do the same.
Using the replace helper rather than a bare remove keeps the enable
before the disable, so the reference count does not transiently reach
zero and evict the device from the IOPF queue.
Fixes: 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260602233426.357499-1-baolu.lu%40linux.intel.com
Assisted-by: Claude:claude-opus-5
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
copied_context_tear_down() zeroes the 128-bit context entry with
context_clear_entry() while the Present bit is still set, and only then
issues the context-cache and IOTLB invalidations. This leaves a window
in which hardware can fetch a torn entry, with some fields already zeroed
while Present is still set, leading to unpredictable behaviour or
spurious faults. While x86 provides strong write ordering, the compiler
may reorder the writes to the two 64-bit halves of the entry, and the
hardware fetch is not guaranteed to be atomic with respect to multiple
CPU writes.
There is no cacheline flush before the invalidation either, so on an
IOMMU without coherent access to the context table the zeroed entry may
not be visible to hardware at the point the invalidation is submitted.
Apply the same ownership handshake described in the VT-d spec, Section
6.5.3.3 ("Guidance to Software for Invalidations"): clear only the Present
bit, flush it out to the IOMMU, perform the invalidations, and only then
zero the remainder of the entry.
Fixes: c7191984e5aad ("iommu/vt-d: Factor out helpers from domain_context_mapping_one()")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260602233426.357499-1-baolu.lu%40linux.intel.com
Assisted-by: Claude:claude-opus-5
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The iommu->copied_tables bitmap was introduced by the IOMMU live
update series to track which context entries have been copied from
the previous kernel. The allocation via bitmap_zalloc() was added
inside copy_translation_tables(), but the error paths were not
updated to free it:
1. When old_rt_phys is 0 (invalid root table address)
2. When memremap(old_rt_phys) fails
3. When kcalloc for ctxt_tbls fails (goto out_unmap, which only
unmaps old_rt without releasing the bitmap)
The bitmap is only cleaned up by free_dmar_iommu(), which is
called from the free_iommu error label in init_dmars(). However,
when copy_translation_tables() fails, init_dmars() does not jump
to free_iommu -- it logs the error, falls through, and continues
with the next IOMMU. As a result, copied_tables is leaked.
Fix this by converting the two early returns to goto a new
err_free_bitmap label, and by making out_unmap fall through to
it so that the bitmap is always freed on any error path. The
success path performs memunmap(old_rt) inline and returns 0
directly, since copied_tables must remain allocated for
subsequent use.
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The cap_ndoms() helper calculates the maximum available domain ID from
the value of capability register, which can be inefficient if called
repeatedly. Cache the maximum supported domain ID in max_domain_id field
during initialization to avoid redundant calls to cap_ndoms() throughout
the IOMMU driver.
No functionality change.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Some BIOS already provides config options to expose/hide VT-d units
as a whole to/from system software. A new demand is to allow exposing
VT-d units but requesting system software to disable DMA remapping
while sustaining interrupt remapping. This can be communicated now by
setting the new DMA_REMAP_OPT_OUT flag bit in the DMAR table, as
introduced in VT-d spec v5.2 (section 8.1, DMA Remapping Reporting
Structure).
Introduce a new off policy (DMAR_FW_OFF) for DMA_REMAP_OPT_OUT. As
the strongest off policy, it cannot be overridden by user opts or
any force_on types. If tboot is enabled in the meantime, kernel will
panic. It is user responsibility to configure BIOS properly.
One cleanup is left for future - the DMAR flag is parsed multiple
times, in detect_intel_iommu(), dmar_platform_optin() (which can be
called at run-time), etc. Caching it is a cleaner way.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
It's replaced by dmar_policy_off() now, covering both "iommu=off"
and "intel_iommu=off". Also remove unnecessary checks on no_iommu,
leaving only one exception in intel_iommu_init() which skips debugfs
init for "iommu=off" but not "intel_iommu=off". Keep it to avoid
surprise for now.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
