| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Prepare non-resident file allocation and initialized-size extension in
->write_iter() before entering the buffered or direct iomap write paths.
Previously, the iomap write callback extended initialized_size. When a
direct write started beyond initialized_size,
ntfs_extend_initialized_size() used iomap_zero_range() to zero the gap
through the page cache. This created dirty folios after iomap DIO had
invalidated its target cache range. The bsync path then had to
synchronously write back the entire zeroed gap to prevent the post-DIO
invalidation from encountering a dirty boundary folio.
Move allocation and initialized-size preparation ahead of iomap submission.
For DIO, kiocb_invalidate_pages() now sees any dirty boundary folio created
by iomap_zero_range(), writes it back when necessary, and invalidates it
before the direct I/O is issued. This removes the explicit synchronous
writeback of the zeroed gap while preserving the required boundary-folio
ordering.
Keep compressed writes out of the early initialized-size extension so their
existing write path can zero uninitialized data before compression. Move
compressed-file allocation expansion to write_iter as well, eliminating the
now-redundant expansion from ntfs_compress_write().
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Several compressed I/O paths discard the address returned by
kmap_local_page() and later access or unmap the page using page_address().
This is invalid for highmem pages, and local mappings must also be unmapped
using the address returned by kmap_local_page().
Map each destination page in ntfs_decompress() only while producing the
current sub-block. Use memcpy_from_page(), memcpy_to_page(), and
memzero_page() for the other page accesses. Remove unnecessary local
mappings from ntfs_write_cb(), where pages are accessed through the vmap()
mapping.
Fixes: 495e90fa3348 ("ntfs: update attrib operations")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Pages don't have indexes, folios have indexes. Correct this in
ntfs_read_compressed_block() and also remove a use of page->mapping
while I'm in here. Also convert the calls to unlock_page() and
flush_dcache_page().
Fixes: 495e90fa3348 ("ntfs: update attrib operations")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
This fixes handle_bounds_compressed_page() on highmem memory
as page_address() does not work on memory which has been kmap_local(),
only on kmap() memory.
Fixes: 495e90fa3348 ("ntfs: update attrib operations")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Nobody is supposed to use page->__folio_index. Use page_offset()
instead, and simplify by working exclusively in loff_t instead of mixing
up loff_t and pgoff_t.
Link: https://lore.kernel.org/all/20260608210618.3437216-3-willy@infradead.org/
Fixes: 495e90fa3348 ("ntfs: update attrib operations")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Co-developed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
zero_partial_compressed_page() has one caller and the next commit
will make changes to it that make it inelegant to split across two
functions.
Fixes: 495e90fa3348 ("ntfs: update attrib operations")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ntfs_non_resident_attr_value_is_valid()
Here the attribute validator computes a single min_len = 64 (as the end of
initialized_size) for all non-resident attributes regardless of the flags
field. This is correct for regular non-resident attributes but for sparse
or compressed non-resident attributes the fixed header is 8 bytes longer,
it includes a compressed_size field at bytes 64-71, min_len should be 72.
Since the validator lets a sparse/compressed attr_record be less than the
correct length, caller's accesses to compressed_size
(e.g., ntfs_read_locked_inode() or ntfs_attr_update_mapping_pairs()) can
extend past the attribute declared boundary.
This can cause OOB reads or OOB writes past the MFT record buffer if the
attribute is positioned near the end of the MFT record.
The compressed_size field is accessed from:
- ntfs_read_locked_inode()
- ntfs_read_locked_attr_inode()
- ntfs_attr_open()
- ntfs_attr_update_mapping_pairs()
ntfs_attr_make_non_resident() seems to be safe.
Fixing this by raising min_len for sparse/compressed attributes in the
validator.
The OOB reads and the OOB writes require a crafted filesystem image, which
is not in the kernel threat model, anyway, fixing memory errors would be
nice to keep things secure.
Signed-off-by: Alexandro Calo <alexandro.calo@nozominetworks.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Updating an EA removes the old record and appends its replacement.
Build the complete $EA stream in memory and rewrite it from offset zero,
rather than committing a compacted stream followed by a separate append.
generic/642 shows that the append path can leave an invalid record layout
on disk, including when a new EA entry is added.
When removing an EA, write the compacted stream before updating
$EA_INFORMATION and restore the original pair if the metadata update
fails.
When the final EA entry is removed the $EA/$EA_INFORMATION pair is torn
down. If removing $EA_INFORMATION fails after $EA has already been
removed, the original $EA is restored so the two attributes stay
consistent.
Fixes: fc053f05ca28 ("ntfs: add reparse and ea operations")
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Removing the final xattr leaves an empty $EA stream. An empty $EA
attribute paired with $EA_INFORMATION is not a valid EA chain and
ntfsck reports it as corrupt.
Remove both attributes when the final EA entry is deleted.
Fixes: fc053f05ca28 ("ntfs: add reparse and ea operations")
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
A replacement first removes the existing EA record, then adds the
replacement. Check the size of that final $EA stream before mutating
the current stream.
This avoids committing the shortened $EA stream or $EA_INFORMATION before
discovering that the replacement exceeds the AttrDef size limit.
Fixes: fc053f05ca28 ("ntfs: add reparse and ea operations")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v7.3 merge window
This includes following USB4/Thunderbolt changes for the v7.3 merge
window:
- Assert Downstream Port Reset for Thunderbolt 3 devices during
shutdown to avoid unnecessary delays over warm reset.
- Tidy up Thunderbolt service ->probe callbacks.
- USB4STREAM improvements.
- AMD host interface quirk to fix Tx ring hang on teardown of a DMA tunnel.
- Minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Clamp DMA tunnel credits to what a hop register can hold
thunderbolt: Use min() for the DMA path credit cap
thunderbolt: debugfs: Replace get_zeroed_page() with kzalloc()
thunderbolt: Add quirk to reset host interface on DMA path teardown for AMD USB4 routers
thunderbolt: stream: Add support for busy polling
thunderbolt: Make interrupt optional for rings
thunderbolt: stream: Support IOCB_NOWAIT in non-blocking I/O as well
thunderbolt: stream: Fix possible short reads/writes
thunderbolt: stream: Restore consumer if copying from iter fails
thunderbolt: Remove redundant dev_err_probe()
docs: admin-guide: thunderbolt: Fix sentence structure
thunderbolt: xdomain: Notify peers after enumeration
thunderbolt: Drop comma after device id array terminator
thunderbolt: Assert that a service driver has a probe callback
thunderbolt: Stop passing matched device ID to .probe()
thunderbolt: Assert downstream port reset on shutdown
|
|
|
|
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v7.3
This is relatively smaller update for CoreSight/hwtracing subsystem updates.
- MAINTAINERS update for HiSilicon PCI Trace & Tune drivers
- Minor fixes to hisi_ptt driver
- Various fixes to the coresight etm4x dirvers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: remove redundant fields in etmv4_save_state
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
coresight: etm4x: fix leaked trace id
coresight: etm4x: fix underflow for usage of (nrseqstate - 1)
coresight: etm4x: fix wrong check of etm4x_sspcicrn_present()
hwtracing: hisi_ptt: Remove unnecessary trace buffer zeroing in trace_start()
hwtracing: hisi_ptt: Propagate DMA reset timeout in trace_start()
MAINTAINERS: Update HiSilicon PCI Trace and Tune maintainer
coresight: etm3x: Fix cntr_val_show() to match cntr_val_store() behavior
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
This pull request contains the following interconnect updates for
the 7.3-rc1 merge window:
- New driver for Maili SoC
- Add support for QoS on the SC8280XP SoC
- Add support for QoS on the x1e80100 SoC
- Add EPSS L3 scaling support for Shikra SoC
- Add COMPILE_TEST support for some platforms
- Misc tiny improvements and fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
interconnect: debugfs-client: add NULL check for platform_device_alloc
interconnect: qcom: simplify allocation
interconnect: qcom: add COMPILE_TEST
interconnect: qcom: add Maili interconnect provider driver
dt-bindings: interconnect: qcom: document the RPMh Network-On-Chip interconnect in Maili SoC
interconnect: qcom: Add EPSS L3 scaling support for Shikra SoC
dt-bindings: interconnect: qcom,osm-l3: Add EPSS L3 DT binding for Qualcomm Shikra SoC
interconnect: qcom: x1e80100: enable QoS configuration
dt-bindings: interconnect: qcom,x1e80100-rpmh: add clocks property to enable QoS
interconnect: qcom: sc8280xp: Enable QoS configuration
dt-bindings: interconnect: qcom,sc8280xp-rpmh: Add reg and clocks for QoS
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of fixes for the 7.2 cycle.
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
* tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
dw_i3c_master_daa() derives the number of newly assigned dynamic
addresses from cmd->rx_len, the ISR sets it to the number of address
slots ENTDAA left unassigned. It starts out as zero, which already
means "every address was assigned", so a timed out transfer leaves
that value in place and it gets used as a result.
If there's no client connected, the addr assign cmd times out, then
the driver calls i3c_master_add_i3c_dev_locked() to add devices that
are not there, each costing about 1s, thus adds non necessary boot
time up to (maxdev * 1)s.
Start from maxdevs instead: no address is assigned before ENTDAA runs,
and the existing rx_count >= maxdevs check then reports an empty bus.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260819044833.32611-1-jszhang@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
- fix long-standing force-feedback initialization race across the subsystem
(Dmitry Torokhov)
- switch to system_dfl_wq (Marco Crivellari)
|
|
- support for tablet-mode switch for AMD SFH-based systems (Basavaraj Natikar)
|
|
- backlight fixes and improvements (Andre Eikmeyer)
|
|
- support for HyperX QuadCast 2 (Benjamin Blume)
|
|
- add support for devices that provide HID descriptor solely through ACPI _DSM
method (XIE Zhibang)
|
|
- support for full I2C bus config parameters (Even Xu)
|
|
- HID++ 2.0 repogrammable button support (Elliot Douglas)
- Bolt receiver support for HID++ devices (Erik Håkansson)
|
|
- support for MSI Claw (Derek J. Clark)
|
|
- assorted fixes (Alexandre Derumier, Christos Maragkos, Jiangshan Yi)
|
|
- memory management fix on device cleanup path (Xu Rao)
- profile index handling fix (Michael Bommarito)
|
|
- small fixes and code improvements (e.g. devm_kasprintf() conversion,
using guard() and scoped_guart(), etc) (Doruk Tan Ozturk,
Rosalie Wanders)
|
|
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improvements and code refactoring (Vicki Pfau)
|
|
- support for MSI Raider A18 HX A9WJG RGB (David Glushkov)
- Improvements and fixes for various Arctis devices support (Sriman Achanta)
|
|
- report data handling optimization (Ruoyu Wang)
|
|
Pull ARM SoC platform updates from Arnd Bergmann:
"The 32-bit Arm platforms are a bit more interesting this time: I
refreshed an earlier series to mark code as deprecated that does have
the tendency of getting in the way of cleanups and new features but
has close to zero users. Among these are:
- 22 of the remaining 28 legacy board files that predate the current
devicetree based descriptions, using old chips from Intel and
Marvell. The remaining six board files are for TI OMAP1 and Samsung
s3c64xx chips and all still have known users.
- support for Cortex-M3/M4/M7 and ARM1136r0 CPU cores and the 25
machines based on these. These all use devicetree but the CPU
support causes disproportional work. Most of them are just
reference boards, the notable exceptions being the Nokia N800/N810
tablet and the Buglabs BUG platform.
- be8, be32, oabi and iwmmxt userspace binaries, which were mostly
associated with the platforms now scheduled for removal and are
increasingly problematic to support with modern toolchains.
Nothing is actually removed at this point, to ensure that any
remaining users continue to have the 7.3-LTS for a while longer.
Patches for removal are currently being tested.
Other updates include a continued work to convert GPIO number based
interfaces to descriptors, a patch to restore little-endian mode on
the one Arm platform (ixp4xx) that only worked in big-endian mode
recently, and some minor cleanups and bugfixes"
* tag 'soc-arm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
MAINTAINERS: Drop redundant lists from various Samsung entries
ARM: tegra: Replace __ASSEMBLY__ with __ASSEMBLER__
ARM: tegra: Fix OF node reference leaks in IRQ init
ARM: lpc32xx: remove a few manually populated OF devices
ARM: lpc32xx: only run SoC init on LPC32xx hardware
firmware: imx: scu: manage mailbox channels and global handle
ARM: sa1100: h3xxx: convert gpio-keys to use software nodes
ARM: sa1100: collie: convert gpio-keys to use software nodes
ARM: sa1100: assabet: convert gpio-keys to use software nodes
gpio: sa1100: register software node for GPIO controller
ARM: ixp4xx: Relax endianness
ARM: replace linux/gpio.h inclusions
soc: imx9: devm_kasprintf error handling
ARM: mark mv78xx0 support as deprecated
ARM: mark axxia platform as deprecated
ARM: mark Cortex-M3/M4/M7 based boards as deprecated
ARM: mark footbridge as deprecated
ARM: mark RiscPC as deprecated
ARM: mark mach-sa1100 as deprecated
ARM: orion5x: mark all board files as deprecated
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"Just the usual updates to the main defconfig files as well as the
omap2 specific one, to enable more loadable modules for better default
hardware support"
* tag 'soc-defconfig-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: defconfig: thead: enable PCA953X GPIO driver
arm64: defconfig: Enable drivers for BeagleBadge
arm64: defconfig: Enable Qualcomm BAM-DMUX WWAN driver
arm64: defconfig: Enable Sound DMIC driver
arm: omap2plus_defconfig: Enable multi-LED
arm64: defconfig: Enable Qualcomm reference device EC driver
ARM: omap2plus_defconfig: enable things required by iwd
arm: multi_v7_defconfig: Enable BRIDGE and DP83848_PHY for TI AM57xx, AM437x and AM335x
arm64: defconfig: Enable Allwinner LRADC input driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are two new mystery SoCs with very little public information
about them so far, Qualcomm's Cortex-A78C based "Shikra" and Altera's
Cortex-A720 based Agilex72 SOCFPGA.
We have also gained support for a couple of SoCs from the 2023/2024
timeframe that have been in the making for a while:
- The Apple platform gains support for M3 Pro, Max and Ultra SoC,
following the basic M3 support from 7.2.
- Samsung Exynos 1580 is a high-end mobile phone SoC from 2024
- Canaan K230 is a RISC-V based 64-bit AI SoC, based on the earlier
K210 chip
- Sophgo SG2000 is a mixed Arm/RISC-V chip that was already supported
using the Arm core but is now also added for RISC-V along with
several other variants of the cv18xx series
In terms of newly added machines we have reference platforms for all
the chips above, plus
- Only four 32-bit Arm boards: two older phones and two older
industrial/embedded boards; using Allwinner, Qualcomm and Rockchip
SoCs
- Three laptops und three phones using Qualcomm SoCs
- Ten 64-bit Rockchips based single-board computers, along with one
NAS box and a game console.
- Seven industrial/embedded boards and modules using NXP i.MX8/9
SoCs.
- A Lenovo desktop box based on NVIDIA Jetson Xavier NX
- A few more single-board computers based on Allwinnner A133,
Spacemit K1 and TI AM62.
As usual, there is a constant stream of minor cleanups and fixes
towards addressing the 'dt-check-style --mode strict' warnings, and
everyone is expected to address those warnings for new submissions
now"
* tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (864 commits)
Revert "riscv: dts: spacemit: k3: add i2s0-i2s5 nodes"
Documentation/process: maintainer-soc: Mention expectation about dt-check-style
ARM: dts: helios4: add SATA regulator supplies
ARM: dts: helios4: add vcc-supply to GPIO expander
ARM: dts: helios4: add vcc-supply to EEPROM
arm64: dts: turris-mox: fix usb3 phys
arm64: dts: ti: Correct white-space style
arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node
arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"This contains two fixes for Alpha floating-point exception handling,
two clang-related fixes, the preparatory changes from the
generic-entry series, an interrupt-entry lockdep fix, two Marvel/EV7
IRQ fixes, an RTC fix, and one header cleanup.
The generic-entry preparation adds regset-based ptrace and core dumps,
ARCH_STACKWALK and lockdep hardirq-state tracking. These changes are
useful independently and enable previously missing debugging
facilities on Alpha.
The final patch switching Alpha to GENERIC_ENTRY is intentionally not
included in this pull request. I am deferring that change to allow
further testing and to reduce the risk of conflicts with ongoing
entry-path work elsewhere in the kernel"
* tag 'alpha-for-v7.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: read $gp and $sp explicitly for clang
alpha: pass -Wa,-mev6 only when using GNU as
alpha: annotate hardirqs-off on IPL 7 interrupt entry
alpha: run the remote RTC access in a worker, not an IPI callback
alpha: don't leak hardware-fabricated FP exception bits to user space
alpha: fix ieee_swcr_to_fpcr setting FPCR_DNOD unconditionally
alpha: enable lockdep hardirq state tracking
alpha: use raw spinlocks for low-level platform locks
alpha: provide ftrace return address support for lockdep
alpha: make irqflags helpers operate on IPL state
alpha: add ARCH_STACKWALK-based stacktrace support
alpha: enable regset-based ptrace and core dumps
alpha: marvel: Fix lock ordering in init_io7_irqs()
alpha: marvel: Fix irq_set_status_flags to use correct IRQ number
alpha: remove unnecessary architecture-specific <asm/device.h>
|
|
Pull csky update from Guo Ren:
- Fix a4/a5 restoration in syscall trace path
* tag 'csky-for-linus-7.3' of https://github.com/c-sky/csky-linux:
csky: Fix a4/a5 restoration in syscall trace path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Get rid of static_cpu_has() - one less API to care about testing CPU
features
- Unify the handling of CPU core types (performance, efficient, etc) by
mapping the vendor-specific types to Linux ones
- Continuation of the work of Ahmed Darwish to centralize CPUID leaf
representation
* tag 'x86_cpu_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU: Rename struct cpuid_read_output to struct cpuid_output
x86/cpu/scattered: Sort it properly
x86/cpu: Use parsed CPUID(0x1)
x86/lib: Add CPUID(0x1) family and model calculation
x86/cpu: Use parsed CPUID(0x0)
x86/cpu/transmeta: Rescan CPUID(0x1) after modifying capabilities
x86/topology: Add TOPO_CPU_TYPE_LOW_POWER
x86/topology: Name the AMD core-type values
x86/topo: Map vendor CPU types to generic Linux such types
x86/bugs: Don't use cpu-type matching in cpu_vuln_blacklist
x86/cpu: Hide and rename static_cpu_has()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual pile of smallish cleanups and fixlets all over the place
* tag 'x86_cleanups_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove unnecessary __maybe_unused annotations
x86/msr: Document the I/O-like write semantics in the msr driver
x86/apic: Ensure ICR register write value is handled as 32 bits
x86/boot/compressed/head_64.S: Clean up SEV-related comments
Documentation/arch/x86/amd-memory-encryption.rst: Fix typo
x86/platform/quark: Fix kernel-doc warnings in imr.c
x86/ras: Move contents from arch/x86/ras/Kconfig into drivers/ras/Kconfig
x86/cpu: Move intel_get_platform_id() to cpu/intel.c
x86/mm: Fix typo in comment
x86/fpu: Fix kernel-doc formatting above fpu_enable_guest_xfd_features()
x86/cfi: Use symmetric SYM_START and SYM_END in __CFI_TYPE()
x86/cfi: Add __init_or_module annotations for fineibt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- How refreshing: no new features but a whole pile of fixes to more or
less serious issues reported by Sashiko along with miscellaneous
cleanups all over the place. All except one by Reinette Chatre, the
one by Tony Luck.
* tag 'x86_cache_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Inform user space when status buffer overflowed
fs/resctrl: Communicate resource group deleted error via last_cmd_status
fs/resctrl: Add last_cmd_status support for writes to max_threshold_occupancy
fs/resctrl: Change last_cmd_status custom during input parsing
fs/resctrl: Use accurate and symmetric exit flows
fs/resctrl: Pass error reading event through to user space
fs/resctrl: Use accurate type for rdt_resource::rid
fs/resctrl: Change pattern used to track number of entries in enum resctrl_conf_type
x86/resctrl: Protect against bad shift
fs/resctrl: Use correct format specifier for printing error pointers
fs/resctrl: Fix UAF from worker threads when domains are removed
x86/resctrl: Ensure domain fully initialized before placed on RCU list
fs/resctrl: Prevent deadlock and use-after-free in info file handlers
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
fs/resctrl: Fix deadlock on errors during mount
fs/resctrl: Move functions to avoid forward references in subsequent fixes
x86,fs/resctrl: Document safe RCU list traversal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternatives update from Borislav Petkov:
- Remove the smp_locks alternatives machinery which was used to patch
out lock prefixes when running a SMP kernel on a uniprocessor machine
* tag 'x86_alternatives_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Drop smp_locks glue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MCE update from Borislav Petkov:
- Add mce=print_all to the mce= kernel cmdline params documentation
* tag 'ras_core_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Document the mce=print_all command line parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"There are two things in here of note. First, there are fixes to reduce
the time that the TLB flushing code sits around with interrupts
disabled. It should be well tested, but it's certainly something to
keep an eye on.
Second is a little back-and-forth in the interactions between the
set_memory*() locking and DEBUG_PAGEALLOC. There was a slightly
painful re-discovery of why DEBUG_PAGEALLOC has special locking rules,
but the code did end up better for it.
Summary:
- Fix pkey_alloc() return value when pkeys are not supported
- Allow preemption during IPI completion waiting to improve wakeup
latency
- Convert more x86 page table code to ptdescs
- Fixes and cleanups for set_memory*() locking, mostly around large
pages"
* tag 'x86_mm_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Fix pkey_alloc() return value when pkeys are not supported
x86/mm: Fix and document DEBUG_PAGEALLOC
x86/mm: Use guard() for pgd_lock
x86/mm: Use guard() in cpa_collapse_large_pages()
x86/mm: Re-enable preemption before flush_tlb_multi()
x86/kvm: Disable preemption in kvm_flush_tlb_multi()
x86/mm: Move flush_tlb_info back to the stack
x86/mm: Cap flush_tlb_info alignment at 64 bytes
x86/mm: Factor out flush_tlb_info initialization
x86/mm/pat: Take cpa_lock around large-page collapse
x86/mm/pat: Don't gate cpa_lock on debug_pagealloc_enabled()
x86/xen: Convert xen_mm_unpin_all() to ptdescs
x86/xen: Convert xen_mm_pin_all() to ptdescs
x86/mm: Convert pgd_page_get_mm() to ptdescs
x86/mm: Convert sync_global_pgds_l4() to ptdescs
x86/mm: Convert sync_global_pgds_l5() to ptdescs
x86/mm: Convert arch_sync_kernel_mappings() to ptdescs
x86/mm/pat: Convert collapse_pmd_page() to ptdescs
x86/mm/pat: Convert __set_pmd_pte() to ptdescs
x86/mm/pat: Use IS_ENABLED() instead of ifdef
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"TDX guests cause #VE exceptions whenever they do port I/O. The guest
then does some instruction decoding and makes a call up to the host
for help. That decoding had a couple of bugs.
Fix those bugs. Use an existing and now shared KVM helper for one of
them"
* tag 'x86_tdx_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Fix zero-extension for 32-bit port I/O
x86/insn-eval: Move assign_register() out of KVM as insn_assign_reg()
x86/tdx: Fix off-by-one in port I/O handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"Just adding some documentation and removing a super stale comment
about an LED driver that was moved long ago:
- Document the intricacies of GS context switching
- Remove old TODO message about Geode LED driver"
* tag 'x86_misc_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/geode: Remove old TODO message about leds-net5501.c
Documentation/x86: Document the intricacies of GS context switching
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry update from Dave Hansen:
"Fix frame pointer unwinder when it encounters FRED stack frames"
* tag 'x86_entry_for_7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/fred: Encode frame pointer on entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and timekeeping core updates from Thomas Gleixner:
- Fix a subtly inconsistency in the timekeeping code, which fails to
account for the monotonicity adjustment in ntp_error.
For small changes of the clocksource multiplicator (+/-1) which are
typically used by the NTP PLL this is hard to observe. But for larger
adjustments, e.g. caused by a direct frequency setting through
adjtimex() the one-time uncompensated offset is significant.
Cure this by adjusting ntp_error with the resulting offset so that
the discrepancy is smoothed away over time
- Make tick length calculations correct in NTP.
The timekeeping core takes the quantisation of the clocksource into
account when calculating the tick length to compensate for the
deviation of the nominal NTP_INTERVAL_LENGTH.
While timekeeping gets this right, NTP is not aware of that, which
means it operates on the nominal value and not on the actual value
which is determined by the clock source frequency. The rounding of a
coarse clocksource like the ACPI PM timer results in a +127 PPM
deviation.
Cure this by exposing the deviation to the NTP code so that it can
operate on the same data as the timekeeping core. This is purely
kernel internal. User space still sees the nominal tick lenght via
adjtimex().
- The accuracy of the NTP adjustments is fairly approximate as the code
assumes that the invocations are precisely in NTP interval frequency
ticks and the final adjustment can over and under-run.
Cure this by adjusting ntp_error by the intended skew on each tick to
achieve the desired rate.
- Handle the two competing skews of time offset and time adjustment
correctly by calculating the conflict portion between the skews and
adjusting both accordingly.
- A set of updates and improvements for the selftests
- The usual small fixes and improvements all over the place
* tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
selftests: timers: nsleep-lat: Check all calls to clock_nanosleep() and clock_gettime()
selftests: timers: nsleep-lat: Reuse kselftest error numbers
selftests: timers: nsleep-lat: Explicitly list the tested clocks
selftests: timers: nsleep-lat: Use NSEC_PER_MSEC define for unreasonable latency
selftests: timers: nanosleep: Report each test separately
selftests: timers: nanosleep: Explicitly handle timer_delete() failure
selftests: timers: nanosleep: Move all single clock tests out of the loop in main()
selftests: timers: nanosleep: Reuse kselftest error numbers
selftests: timers: nanosleep: Explicitly list the tested clocks
selftests: timers: nanosleep: Drop output alignment
selftests: timers: Use clock_name() and constants from clock-helpers.h
selftests: Add clock-helpers.h
timer_list: Use ktime_t over nanoseconds
timer_list: Use standard 'long long' format placeholders
hrtimer: Add a lockdep assertion to hrtimer_update_base()
timekeeping: Use u32 for clock_was_set_seq
timekeeping: Rename clockid_aux_valid() to clockid_is_aux_clock()
hrtimer: Account nr_retries on recovered interrupt retries
timers/itimer: Zero-init old itimerval before copy to userspace
nohz: Replace dead select with choice default
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource/event driver updates from Thomas Gleixner:
- Remove redundant dev_err() and dev_err_probe() invocations in various
drivers
- Handle SWAP_IO_SPACE correctly in the rtl-otto driver
- Make the Samsumg PWM timer driver PREEMPT_RT compatible
- Ensure that the SUN4I timer is programmed with a delta larger than
zero as a zero delta causes the the timer to be disabled
- The usual fixes and improvements all over the place
* tag 'timers-clocksource-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada: Unwind timer clock on init failure
clocksource/drivers/rtl-otto: Change driver to use __raw reads and writes
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
clocksource/drivers/clps711x: Do not unmap clocksource MMIO
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
clocksource/drivers/timer-sun4i: Advertise a real minimum delta
clocksource: Remove redundant dev_err()/dev_err_probe()
clocksource/drivers/sh_cmt: Use named initializers for platform_device_id arrays
clocksource/drivers/sh_mtu2: Drop unused assignment of platform_device_id
|
