| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fl6_update_dst() is called for every TCP (and others) transmit,
and is a nop for common cases.
Split it in two parts :
1) fl6_update_dst() inline helper, small and fast.
2) __fl6_update_dst() for the exception, out of line.
Small size increase to get better TX performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 2/2 grow/shrink: 8/0 up/down: 296/-125 (171)
Function old new delta
__fl6_update_dst - 104 +104
rawv6_sendmsg 2244 2284 +40
udpv6_sendmsg 3013 3043 +30
tcp_v6_connect 1514 1534 +20
cookie_v6_check 1501 1519 +18
ip6_datagram_dst_update 673 690 +17
inet6_sk_rebuild_header 499 516 +17
inet6_csk_route_socket 507 524 +17
inet6_csk_route_req 343 360 +17
__pfx___fl6_update_dst - 16 +16
__pfx_fl6_update_dst 16 - -16
fl6_update_dst 109 - -109
Total: Before=22570304, After=22570475, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128185548.3738781-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221
Fixes: fbc2e7d9cf49 ("cls_u32: use skb_header_pointer() to dereference data safely")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Closes: https://lore.kernel.org/netdev/CANn89iJkyUZ=mAzLzC4GdcAgLuPnUoivdLaOs6B9rq5_erj76w@mail.gmail.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The xenwatch thread can race with other back-end change notifications
and call xen_9pfs_front_free() twice, hitting the observed general
protection fault due to a double-free. Guard the teardown path so only
one caller can release the front-end state at a time, preventing the
crash.
This is a fix for the following double-free:
[ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none)
[ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150
[ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42
[ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246
[ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000
[ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000
[ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000
[ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68
[ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040
[ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000
[ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660
[ 27.052418] Call Trace:
[ 27.052420] <TASK>
[ 27.052422] xen_9pfs_front_changed+0x5d5/0x720
[ 27.052426] ? xenbus_otherend_changed+0x72/0x140
[ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10
[ 27.052434] xenwatch_thread+0x94/0x1c0
[ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10
[ 27.052442] kthread+0xf8/0x240
[ 27.052445] ? __pfx_kthread+0x10/0x10
[ 27.052449] ? __pfx_kthread+0x10/0x10
[ 27.052452] ret_from_fork+0x16b/0x1a0
[ 27.052456] ? __pfx_kthread+0x10/0x10
[ 27.052459] ret_from_fork_asm+0x1a/0x30
[ 27.052463] </TASK>
[ 27.052465] Modules linked in:
[ 27.052471] ---[ end trace 0000000000000000 ]---
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Message-ID: <20260129230348.2390470-1-stefano.stabellini@amd.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.
This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.
Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
|
|
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Export hci_discovery_active() so it can be used by bluetooth
drivers built as modules.
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
1. Implement LE Event Mask to include events required for
LE Channel Sounding
2. Enable Channel Sounding feature bit in the
LE Host Supported Features command
3. Define HCI command and event structures necessary for
LE Channel Sounding functionality
Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
While the configurable system parameters allow controlling the SNIFF
mode parameters, they do not include the idle_timeout parameter
responsible for enabling SNIFF mode.
Add the idle_timeout parameter to allow controlling the idle timeout
of BR/EDR connections.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The connection link policy is only set when establishing an outgoing
ACL connection causing connection idle modes not to be available on
incoming connections. Move the setting of the link policy to the
creation of the connection so all ACL connection will use the link
policy set on the HCI device.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_conn_enter_active_mode() uses queue_delayed_work() with the
intention that the work will run after the given timeout. However,
queue_delayed_work() does nothing if the work is already queued, so
depending on the link policy we may end up putting the connection
into idle mode every hdev->idle_timeout ms.
Use mod_delayed_work() instead so the work is queued if not already
queued, and the timeout is updated otherwise.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
conn->le_{tx,rx}_phy is not actually a bitfield as it set by
HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current
PHY in use not what is supported by the controller, so this introduces
different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are
supported by the connection.
Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This patch enhances GSO segment handling by properly checking
the SKB_GSO_DODGY flag for frag_list GSO packets, addressing
low throughput issues observed when a station accesses IPv4
servers via hotspots with an IPv6-only upstream interface.
Specifically, it fixes a bug in GSO segmentation when forwarding
GRO packets containing a frag_list. The function skb_segment_list
cannot correctly process GRO skbs that have been converted by XLAT,
since XLAT only translates the header of the head skb. Consequently,
skbs in the frag_list may remain untranslated, resulting in protocol
inconsistencies and reduced throughput.
To address this, the patch explicitly sets the SKB_GSO_DODGY flag
for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers
(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO
packets as potentially modified after protocol translation. As a
result, GSO segmentation will avoid using skb_segment_list and
instead falls back to skb_segment for packets with the SKB_GSO_DODGY
flag. This ensures that only safe and fully translated frag_list
packets are processed by skb_segment_list, resolving protocol
inconsistencies and improving throughput when forwarding GRO packets
converted by XLAT.
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260126152114.1211-1-jibin.zhang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just one fix, for a parsing error in mac80211 that might
result in a one byte out-of-bounds read.
* tag 'wireless-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: correctly decode TTLM with default link map
====================
Link: https://patch.msgid.link/20260129110403.178036-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
TID-To-Link Mapping (TTLM) elements do not contain any link mapping
presence indicator if a default mapping is used and parsing needs to be
skipped.
Note that access points should not explicitly report an advertised TTLM
with a default mapping as that is the implied mapping if the element is
not included, this is even the case when switching back to the default
mapping. However, mac80211 would incorrectly parse the frame and would
also read one byte beyond the end of the element.
Reported-by: Ruikai Peng <ruikai@pwno.io>
Closes: https://lore.kernel.org/linux-wireless/CAFD3drMqc9YWvTCSHLyP89AOpBZsHdZ+pak6zVftYoZcUyF7gw@mail.gmail.com
Fixes: 702e80470a33 ("wifi: mac80211: support handling of advertised TID-to-link mapping")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260129113349.d6b96f12c732.I69212a50f0f70db185edd3abefb6f04d3cb3e5ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The current implementation uses a linear list to find queued packets by
ID when processing verdicts from userspace. With large queue depths and
out-of-order verdicting, this O(n) lookup becomes a significant
bottleneck, causing userspace verdict processing to dominate CPU time.
Replace the linear search with a hash table for O(1) average-case
packet lookup by ID. A global rhashtable spanning all network
namespaces attributes hash bucket memory to kernel but is subject to
fixed upper bound.
Signed-off-by: Scott Mitchell <scott.k.mitch1@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Use the is_leap_year() helper from rtc.h instead of
writing it by hand
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Introduce sw acceleration for tx path of IP6IP6 tunnels relying on the
netfilter flowtable infrastructure.
IP6IP6 tx sw acceleration can be tested running the following scenario
where the traffic is forwarded between two NICs (eth0 and eth1) and an
IP6IP6 tunnel is used to access a remote site (using eth1 as the underlay
device):
ETH0 -- TUN0 <==> ETH1 -- [IP network] -- TUN1 (2001:db8:3::2)
$ip addr show
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:1::2/64 scope global nodad
valid_lft forever preferred_lft forever
7: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:11:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:2::1/64 scope global nodad
valid_lft forever preferred_lft forever
8: tun0@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default qlen 1000
link/tunnel6 2001:db8:2::1 peer 2001:db8:2::2 permaddr ce9c:2940:7dcc::
inet6 2002:db8:1::1/64 scope global nodad
valid_lft forever preferred_lft forever
$ip -6 route show
2001:db8:1::/64 dev eth0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev eth1 proto kernel metric 256 pref medium
2002:db8:1::/64 dev tun0 proto kernel metric 256 pref medium
default via 2002:db8:1::2 dev tun0 metric 1024 pref medium
$nft list ruleset
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { eth0, eth1 }
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Reproducing the scenario described above using veths I got the following
results:
- TCP stream received from the IPIP tunnel:
- net-next: (baseline) ~93Gbps
- net-next + IP6IP6 flowtbale support: ~98Gbps
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Introduce sw acceleration for rx path of IP6IP6 tunnels relying on the
netfilter flowtable infrastructure. Subsequent patches will add sw
acceleration for IP6IP6 tunnels tx path.
IP6IP6 rx sw acceleration can be tested running the following scenario
where the traffic is forwarded between two NICs (eth0 and eth1) and an
IP6IP6 tunnel is used to access a remote site (using eth1 as the underlay
device):
ETH0 -- TUN0 <==> ETH1 -- [IP network] -- TUN1 (2001:db8:3::2)
$ip addr show
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:1::2/64 scope global nodad
valid_lft forever preferred_lft forever
7: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:11:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:2::1/64 scope global nodad
valid_lft forever preferred_lft forever
8: tun0@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default qlen 1000
link/tunnel6 2001:db8:2::1 peer 2001:db8:2::2 permaddr ce9c:2940:7dcc::
inet6 2002:db8:1::1/64 scope global nodad
valid_lft forever preferred_lft forever
$ip -6 route show
2001:db8:1::/64 dev eth0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev eth1 proto kernel metric 256 pref medium
2002:db8:1::/64 dev tun0 proto kernel metric 256 pref medium
default via 2002:db8:1::2 dev tun0 metric 1024 pref medium
$nft list ruleset
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { eth0, eth1 }
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Reproducing the scenario described above using veths I got the following
results:
- TCP stream received from the IPIP tunnel:
- net-next: (baseline) ~ 81Gbps
- net-next + IP6IP6 flowtbale support: ~112Gbps
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add tunnel hdr_size and tunnel proto fields in nf_flowtable_ctx struct
in order to store IP tunnel header size and protocol used during IPIP
and IP6IP6 tunnel sw offloading decapsulation and avoid recomputing them
during tunnel header pop since this is constant for IPv6.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nf_flow_skb_encap_protocol/nf_flow_ip4_tunnel_proto signature
Rely on nf_flowtable_ctx struct pointer in nf_flow_ip4_tunnel_proto and
nf_flow_skb_encap_protocol routine signature. This is a preliminary patch
to introduce IP6IP6 flowtable acceleration since nf_flowtable_ctx will
be used to store IP6IP6 tunnel info.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Use io_wait_event_killable() to ensure that time spent waiting for 9P
RPC transactions is accounted as IO wait time.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Message-ID: <b8601271263011203fa34eada2e8ac21d9f679e5.1769179462.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reported-by: Marco Angaroni <marco.angaroni@italtel.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__inet6_csk_dst_check() is a very simple wrapper with no value,
it is used only once.
Directly use __sk_dst_check().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260127211203.1524339-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_tx_timestamp() is only called at the end of tcp_sendmsg_locked()
before the final tcp_push().
By the time it is called, it is possible all the copied data
has been sent already (transmit queue is empty).
If this is the case, use the last skb in the rtx queue.
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the check if netfilter's static keys are available. netfilter defines
and exports static keys if CONFIG_JUMP_LABEL is enabled. (HAVE_JUMP_LABEL
is never defined.)
Fixes: 971502d77faa ("bridge: netfilter: unroll NF_HOOK helper in bridge input path")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260127101925.1754425-1-martin@kaiser.cx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_fib_metrics_init() is only called from fib_create_info()
and ip6_route_info_create().
Let's use EXPORT_IPV6_MOD_GPL() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127081335.646666-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported that struct fib_alias.fa_state can be
modified locklessly by RCU readers. [0]
Let's use READ_ONCE()/WRITE_ONCE() properly.
[0]:
BUG: KCSAN: data-race in fib_table_lookup / fib_table_lookup
write to 0xffff88811b06a7fa of 1 bytes by task 4167 on cpu 0:
fib_alias_accessed net/ipv4/fib_lookup.h:32 [inline]
fib_table_lookup+0x361/0xd60 net/ipv4/fib_trie.c:1565
fib_lookup include/net/ip_fib.h:390 [inline]
ip_route_output_key_hash_rcu+0x378/0x1380 net/ipv4/route.c:2814
ip_route_output_key_hash net/ipv4/route.c:2705 [inline]
__ip_route_output_key include/net/route.h:169 [inline]
ip_route_output_flow+0x65/0x110 net/ipv4/route.c:2932
udp_sendmsg+0x13c3/0x15d0 net/ipv4/udp.c:1450
inet_sendmsg+0xac/0xd0 net/ipv4/af_inet.c:859
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0x53a/0x600 net/socket.c:2592
___sys_sendmsg+0x195/0x1e0 net/socket.c:2646
__sys_sendmmsg+0x185/0x320 net/socket.c:2735
__do_sys_sendmmsg net/socket.c:2762 [inline]
__se_sys_sendmmsg net/socket.c:2759 [inline]
__x64_sys_sendmmsg+0x57/0x70 net/socket.c:2759
x64_sys_call+0x1e28/0x3000 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc0/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff88811b06a7fa of 1 bytes by task 4168 on cpu 1:
fib_alias_accessed net/ipv4/fib_lookup.h:31 [inline]
fib_table_lookup+0x338/0xd60 net/ipv4/fib_trie.c:1565
fib_lookup include/net/ip_fib.h:390 [inline]
ip_route_output_key_hash_rcu+0x378/0x1380 net/ipv4/route.c:2814
ip_route_output_key_hash net/ipv4/route.c:2705 [inline]
__ip_route_output_key include/net/route.h:169 [inline]
ip_route_output_flow+0x65/0x110 net/ipv4/route.c:2932
udp_sendmsg+0x13c3/0x15d0 net/ipv4/udp.c:1450
inet_sendmsg+0xac/0xd0 net/ipv4/af_inet.c:859
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0x53a/0x600 net/socket.c:2592
___sys_sendmsg+0x195/0x1e0 net/socket.c:2646
__sys_sendmmsg+0x185/0x320 net/socket.c:2735
__do_sys_sendmmsg net/socket.c:2762 [inline]
__se_sys_sendmmsg net/socket.c:2759 [inline]
__x64_sys_sendmmsg+0x57/0x70 net/socket.c:2759
x64_sys_call+0x1e28/0x3000 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc0/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 4168 Comm: syz.4.206 Not tainted syzkaller #0 PREEMPT(voluntary)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Reported-by: syzbot+d24f940f770afda885cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69783ead.050a0220.c9109.0013.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127043528.514160-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below [0] without a repro.
It indicates that struct nci_dev.cmd_wq had been destroyed before
nci_close_device() was called via rfkill.
nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which
(I think) was called from virtual_ncidev_close() when syzbot close()d
an fd of virtual_ncidev.
The problem is that nci_unregister_device() destroys nci_dev.cmd_wq
first and then calls nfc_unregister_device(), which removes the
device from rfkill by rfkill_unregister().
So, the device is still visible via rfkill even after nci_dev.cmd_wq
is destroyed.
Let's unregister the device from rfkill first in nci_unregister_device().
Note that we cannot call nfc_unregister_device() before
nci_close_device() because
1) nfc_unregister_device() calls device_del() which frees
all memory allocated by devm_kzalloc() and linked to
ndev->conn_info_list
2) nci_rx_work() could try to queue nci_conn_info to
ndev->conn_info_list which could be leaked
Thus, nfc_unregister_device() is split into two functions so we
can remove rfkill interfaces only before nci_close_device().
[0]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349
Modules linked in:
CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline]
RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187
Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f
RSP: 0018:ffffc9000c767680 EFLAGS: 00010046
RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000
RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0
RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4
R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2
R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30
FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0
Call Trace:
<TASK>
lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868
touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940
__flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982
nci_close_device+0x302/0x630 net/nfc/nci/core.c:567
nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639
nfc_dev_down+0x152/0x290 net/nfc/core.c:161
nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179
rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346
rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301
vfs_write+0x29a/0xb90 fs/read_write.c:684
ksys_write+0x150/0x270 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa59b39acb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9
RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007
RBP: 00007fa59b408bf7 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa59b616038 R14: 00007fa59b615fa0 R15: 00007ffc82218788
</TASK>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reported-by: syzbot+f9c5fd1a0874f9069dce@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/695e7f56.050a0220.1c677c.036c.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127040411.494931-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_rack_advance() is called from tcp_ack() and tcp_sacktag_one().
Moving it to tcp_input.c allows the compiler to inline it and save
both space and cpu cycles in TCP fast path.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 0/2 grow/shrink: 1/1 up/down: 98/-132 (-34)
Function old new delta
tcp_ack 5741 5839 +98
tcp_sacktag_one 407 395 -12
__pfx_tcp_rack_advance 16 - -16
tcp_rack_advance 104 - -104
Total: Before=22572680, After=22572646, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_rack_update_reo_wnd() is called only once from tcp_ack()
Move it to tcp_input.c so that it can be inlined by the compiler
to save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 110/-153 (-43)
Function old new delta
tcp_ack 5631 5741 +110
__pfx_tcp_rack_update_reo_wnd 16 - -16
tcp_rack_update_reo_wnd 137 - -137
Total: Before=22572723, After=22572680, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is unlikely we have to call tcp_process_tlp_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reorder struct virtio_vsock fields to place the DMA buffer (event_list)
last. This eliminates the padding from aligning the struct size on
ARCH_DMA_MINALIGN.
Message-ID: <ce44f61af415521e00ab7492aa16d3d19f00bd5e.1769632071.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To dynamically adjust the thread count, nfsd requires some information
about how busy things are.
Change svc_recv() to take a timeout value, and then allow the wait for
work to time out if it's set. If a timeout is not defined, then the
schedule will be set to MAX_SCHEDULE_TIMEOUT. If the task waits for the
full timeout, then have it return -ETIMEDOUT to the caller.
If it wakes up, finds that there is more work and that no threads are
available, then attempt to set SP_TASK_STARTING. If wasn't already set,
have the task return -EBUSY to cue to the caller that the service could
use more threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Break out the part of svc_start_kthreads() that creates a thread into
svc_new_thread(), as a new exported helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a new pool->sp_nrthrmin field to track the minimum number of threads
in a pool. Add min_threads parameters to both svc_set_num_threads() and
svc_set_pool_threads(). If min_threads is non-zero and less than the
max, svc_set_num_threads() will ensure that the number of running
threads is between the min and the max.
If the min is 0 or greater than the max, then it is ignored, and the
maximum number of threads will be started, and never spun down.
For now, the min_threads is always 0, but a later patch will pass the
proper value through from nfsd.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The kernel currently tracks the number of threads running in a pool in
the "sp_nrthreads" field. In the future, where threads are dynamically
spun up and down, it'll be necessary to keep track of the maximum number
of requested threads separately from the actual number running.
Add a pool->sp_nrthrmax parameter to track this. When userland changes
the number of threads in a pool, update that value accordingly.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that svc_set_num_threads() handles distributing the threads among
the available pools, remove the special handling of a NULL pool pointer
from svc_start_kthreads() and svc_stop_kthreads().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_set_num_threads() will set the number of running threads for a given
pool. If the pool argument is set to NULL however, it will distribute
the threads among all of the pools evenly.
These divergent codepaths complicate the move to dynamic threading.
Simplify the API by splitting these two cases into different helpers:
Add a new svc_set_pool_threads() function that sets the number of
threads in a single, given pool. Modify svc_set_num_threads() to
distribute the threads evenly between all of the pools and then call
svc_set_pool_threads() for each.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Convert svcrdma to the bvec-based RDMA API introduced earlier in
this series.
The bvec-based RDMA API eliminates the intermediate scatterlist
conversion step, allowing direct DMA mapping from bio_vec arrays.
This simplifies the svc_rdma_rw_ctxt structure by removing the
chained SG table management.
The structure retains an inline array approach similar to the
previous scatterlist implementation: an inline bvec array sized
to max_send_sge handles most I/O operations without additional
allocation. Larger requests fall back to dynamic allocation.
This preserves the allocation-free fast path for typical NFS
operations while supporting arbitrarily large transfers.
The bvec API handles all device types internally, including iWARP
devices which require memory registration. No explicit fallback
path is needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-6-cel@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f464 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
All drivers that need to report the RX ring count now implement the
get_rx_ring_count callback directly. Remove the legacy fallback path
that obtained this information by calling get_rxnfc with ETHTOOL_GRXRINGS.
This simplifies the code and makes get_rx_ring_count the only way
to retrieve the RX ring count.
Note: ethtool_get_rx_ring_count() returns int to allow returning
-EOPNOTSUPP, while the callback returns u32. The implicit conversion
is safe since RX ring counts will not exceed INT_MAX while we are still
alive.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260126-grxring_final-v1-1-0981cb24512e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In GSO_PARTIAL segmentation, set the UDP length field to the single
segment size (gso_size + UDP header) instead of the large MSS size.
This provides hardware with a template length value for final
segmentation, similar to how tunnel GSO_PARTIAL handles outer headers
in UDP tunnels.
This will remove the need to manually adjust the UDP header length in
the drivers, as can be seen in subsequent patches.
This was suggested by Alex in 2018:
https://lore.kernel.org/netdev/CAKgT0UcdnUWgr3KQ=RnLKigokkiUuYefmL-ePpDvJOBNpKScFA@mail.gmail.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260125121649.778086-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's now a proper SHA-1 API that follows the usual conventions for
hash function APIs: sha1_init(), sha1_update(), sha1_final(), sha1().
The only remaining user of the older low-level SHA-1 API,
sha1_init_raw() and sha1_transform(), is ipv6_generate_stable_address().
I'd like to remove this older API, which is too low-level.
Unfortunately, ipv6_generate_stable_address() does in fact skip the
SHA-1 finalization for some reason. So the values it computes are not
standard SHA-1 values, and it sort of does want the low-level API.
Still, it's still possible to use the higher-level functions sha1_init()
and sha1_update() to get the same result, provided that the resulting
state is used directly, skipping sha1_final().
So, let's do that instead. This will allow removing the low-level API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260123051656.396371-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
Therefore, for sockmap, relying solely on copied_seq and rcv_nxt to
calculate FIONREAD is not enough.
This patch adds a new msg_tot_len field in the psock structure to record
the data length in ingress_msg. Additionally, we implement new ioctl
interfaces for TCP and UDP to intercept FIONREAD operations.
Note that we intentionally do not include sk_receive_queue data in the
FIONREAD result. Data in sk_receive_queue has not yet been processed by
the BPF verdict program, and may be redirected to other sockets or
dropped. Including it would create semantic ambiguity since this data
may never be readable by the user.
Unix and VSOCK sockets have similar issues, but fixing them is outside
the scope of this patch as it would require more intrusive changes.
Previous work by John Fastabend made some efforts towards FIONREAD support:
commit e5c6de5fa025 ("bpf, sockmap: Incorrectly handling copied_seq")
Although the current patch is based on the previous work by John Fastabend,
it is acceptable for our Fixes tag to point to the same commit.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
The issue is that when reading from ingress_msg, we update tp->copied_seq
by default. However, if the data is not from its own protocol stack,
tcp->rcv_nxt is not increased. Later, if we convert this socket to a
native socket, reading from this socket may fail because copied_seq might
be significantly larger than rcv_nxt.
This fix also addresses the syzkaller-reported bug referenced in the
Closes tag.
This patch marks the skmsg objects in ingress_msg. When reading, we update
copied_seq only if the data is from its own protocol stack.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Closes: https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260124113314.113584-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
