| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
UDP TX paths also have some code for UDP-Lite partial
checksum:
* udplite_csum() in udp_send_skb() and udp_v6_send_skb()
* udplite_getfrag() in udp_sendmsg() and udpv6_sendmsg()
Let's remove such code.
Now, we can use IPPROTO_UDP directly instead of sk->sk_protocol
or fl6->flowi6_proto for csum_tcpudp_magic() and csum_ipv6_magic().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP-Lite supports the partial checksum and the coverage is
stored in the position of the length field of struct udphdr.
In RX paths, udp4_csum_init() / udp6_csum_init() save the value
in UDP_SKB_CB(skb)->cscov and set UDP_SKB_CB(skb)->partial_cov
to 1 if the coverage is not full.
The subsequent processing diverges depending on the value,
but such paths are now dead.
Also, these functions have some code guarded for UDP:
* udp_unicast_rcv_skb / udp6_unicast_rcv_skb
* __udp4_lib_rcv() and __udp6_lib_rcv().
Let's remove the partial csum code and the unnecessary
guard for UDP-Lite in RX.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since UDP and UDP-Lite shared most of the code, we have had
to check the protocol every time we increment SNMP stats.
Now that the UDP-Lite paths are dead, let's remove UDP-Lite
SNMP stats.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have deprecated IPv6 UDP-Lite sockets.
Let's drop support for IPv4 UDP-Lite sockets as well.
Most of the changes are similar to the IPv6 patch: removing
udplite.c and udp_impl.h, marking most functions in udp_impl.h
as static, moving the prototype for udp_recvmsg() to udp.h, and
adding INDIRECT_CALLABLE_SCOPE for it.
In addition, the INET_DIAG support for UDP-Lite is dropped.
We will remove the remaining dead code in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We cannot create IPv6 UDP-Lite sockets anymore.
Let's remove dead code in IPV6_ADDRFORM.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As announced in commit be28c14ac8bb ("udplite: Print deprecation
notice."), it's time to deprecate UDP-Lite.
As a first step, let's drop support for IPv6 UDP-Lite sockets.
We will remove the remaining dead code gradually.
Along with the removal of udplite.c, most of the functions exposed
via udp_impl.h are made static.
The prototypes of udpv6_sendmsg() and udpv6_recvmsg() are moved
to udp.h, but only udpv6_recvmsg() has INDIRECT_CALLABLE_DECLARE()
because udpv6_sendmsg() is exported for rxrpc since commit ed472b0c8783
("rxrpc: Call udp_sendmsg() directly").
Also, udpv6_recvmsg() needs INDIRECT_CALLABLE_SCOPE for
CONFIG_MITIGATION_RETPOLINE=n.
Note that udplite.h is included temporarily for udplite_csum().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit a3d2599b2446 ("ipv{4,6}/udp{,lite}: simplify proc
registration"), udp4_seq_show() and udp6_seq_show() are not
used in net/ipv4/udplite.c and net/ipv6/udplite.c.
Instead, udp_seq_ops and udp6_seq_ops are exposed to UDP-Lite.
Let's make udp4_seq_show() and udp6_seq_show() static.
udp_seq_ops and udp6_seq_ops are moved to udp_impl.h so that
we can make them static when the header is removed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
|
|
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement.
Fixes: 5e35941d9901 ("[NETFILTER]: Add H.323 conntrack/NAT helper")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Tested-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The monthday field can be up to 31, and shifting a signed integer 1
by 31 positions (1 << 31) is undefined behavior in C, as the result
overflows a 32-bit signed int. Use 1U to ensure well-defined behavior
for all valid monthday values.
Change the weekday shift to 1U as well for consistency.
Fixes: ee4411a1b1e0 ("[NETFILTER]: x_tables: add xt_time match")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Tested-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Templates refer to objects that can go away while packets are sitting in
nfqueue refer to:
- helper, this can be an issue on module removal.
- timeout policy, nfnetlink_cttimeout might remove it.
The use of templates with zone and event cache filter are safe, since
this just copies values.
Flush these enqueued packets in case the template rule gets removed.
Fixes: 24de58f46516 ("netfilter: xt_CT: allow to attach timeout policy + glue code")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies.
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330
Fixes: 563125a73ac3 ("netfilter: nftables: generalize set extension to support for several expressions")
Reported-by: Gurpreet Shergill <giki.shergill@proton.me>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
In decode_int(), the CONS case calls get_bits(bs, 2) to read a length
value, then calls get_uint(bs, len) without checking that len bytes
remain in the buffer. The existing boundary check only validates the
2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()
reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte
slab-out-of-bounds read.
Add a boundary check for len bytes after get_bits() and before
get_uint().
Fixes: 5e35941d9901 ("[NETFILTER]: Add H.323 conntrack/NAT helper")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
With double vlan tagged packets in the fastpath, getting the error:
skb_vlan_push got skb with skb->data not at mac header (offset 18)
Call skb_reset_mac_header() before calling skb_vlan_push().
Fixes: c653d5a78f34 ("netfilter: flowtable: inline vlan encapsulation in xmit path")
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This reverts commit 648946966a08 ("netfilter: nft_set_rbtree: validate
open interval overlap").
There have been reports of nft failing to laod valid rulesets after this
patch was merged into -stable.
I can reproduce several such problem with recent nft versions, including
nft 1.1.6 which is widely shipped by distributions.
We currently have little choice here.
This commit can be resurrected at some point once the nftables fix that
triggers the false overlap positive has appeared in common distros
(see e83e32c8d1cd ("mnl: restore create element command with large batches" in
nftables.git).
Fixes: 648946966a08 ("netfilter: nft_set_rbtree: validate open interval overlap")
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
sip_help_tcp() parses the SIP Content-Length header with
simple_strtoul(), which returns unsigned long, but stores the result in
unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are
silently truncated before computing the SIP message boundary.
For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,
causing the parser to miscalculate where the current message ends. The
loop then treats trailing data in the TCP segment as a second SIP
message and processes it through the SDP parser.
Fix this by changing clen to unsigned long to match the return type of
simple_strtoul(), and reject Content-Length values that exceed the
remaining TCP payload length.
Fixes: f5b321bd37fb ("netfilter: nf_conntrack_sip: add TCP support")
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink.
These attributes are used by the kernel without any validation.
Extend the netlink policies accordingly.
Quoting the reporter:
nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE
value directly to ct->proto.sctp.state without checking that it is
within the valid range. [..]
and: ... with exp->dir = 100, the access at
ct->master->tuplehash[100] reads 5600 bytes past the start of a
320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by
UBSAN.
Fixes: 076a0ca02644 ("netfilter: ctnetlink: add NAT support for expectations")
Fixes: a258860e01b8 ("netfilter: ctnetlink: add full support for SCTP to ctnetlink")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the
netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the
conntrack reference immediately after netlink_dump_start(). When the
dump spans multiple rounds, the second recvmsg() triggers the dump
callback which dereferences the now-freed conntrack via nfct_help(ct),
leading to a use-after-free on ct->ext.
The bug is that the netlink_dump_control has no .start or .done
callbacks to manage the conntrack reference across dump rounds. Other
dump functions in the same file (e.g. ctnetlink_get_conntrack) properly
use .start/.done callbacks for this purpose.
Fix this by adding .start and .done callbacks that hold and release the
conntrack reference for the duration of the dump, and move the
nfct_help() call after the cb->args[0] early-return check in the dump
callback to avoid dereferencing ct->ext unnecessarily.
BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0
Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133
CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY
Call Trace:
<TASK>
ctnetlink_exp_ct_dump_table+0x4f/0x2e0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
? aa_sk_perm+0x184/0x450
sock_recvmsg+0xde/0xf0
Allocated by task 133:
kmem_cache_alloc_noprof+0x134/0x440
__nf_conntrack_alloc+0xa8/0x2b0
ctnetlink_create_conntrack+0xa1/0x900
ctnetlink_new_conntrack+0x3cf/0x7d0
nfnetlink_rcv_msg+0x48e/0x510
netlink_rcv_skb+0xc9/0x1f0
nfnetlink_rcv+0xdb/0x220
netlink_unicast+0x3ec/0x590
netlink_sendmsg+0x397/0x690
__sys_sendmsg+0xf4/0x180
Freed by task 0:
slab_free_after_rcu_debug+0xad/0x1e0
rcu_core+0x5c3/0x9c0
Fixes: e844a928431f ("netfilter: ctnetlink: allow to dump expectation per master conntrack")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This configuration doesn't make sense, neither S1G nor
60G have 20 or 40 MHz channel width. Reject it to not
run into the new cfg80211_chandef_create() warning.
Fixes: 92d77e06e73c ("wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers.
Reported-by: syzbot+56b6a844a4ea74487b7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=56b6a844a4ea74487b7b
Tested-by: syzbot+56b6a844a4ea74487b7b@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260313092417.520807-1-kartikey406@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After cancel_delayed_work_sync() is called from
xfrm_nat_keepalive_net_fini(), xfrm_state_fini() flushes remaining
states via __xfrm_state_delete(), which calls
xfrm_nat_keepalive_state_updated() to re-schedule nat_keepalive_work.
The following is a simple race scenario:
cpu0 cpu1
cleanup_net() [Round 1]
ops_undo_list()
xfrm_net_exit()
xfrm_nat_keepalive_net_fini()
cancel_delayed_work_sync(nat_keepalive_work);
xfrm_state_fini()
xfrm_state_flush()
xfrm_state_delete(x)
__xfrm_state_delete(x)
xfrm_nat_keepalive_state_updated(x)
schedule_delayed_work(nat_keepalive_work);
rcu_barrier();
net_complete_free();
net_passive_dec(net);
llist_add(&net->defer_free_list, &defer_free_list);
cleanup_net() [Round 2]
rcu_barrier();
net_complete_free()
kmem_cache_free(net_cachep, net);
nat_keepalive_work()
// on freed net
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync().
Fixes: f531d13bdfe3 ("xfrm: support sending NAT keepalives in ESP in UDP states")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
It is not valid to have an S1G chandef with a non-S1G width. Enforce
this during chandef validation.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-4-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
cfg80211_chandef_create() should only be used by bands that are
HT-based and the chantype argument makes sense. Insert a WARN such
that it isn't used on 60GHz and S1GHz bands and to catch any
potential existing uses by those bands.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
cfg80211_chandef_create() is called universally to create the
default chandef during hw registration, however it only really
makes sense to be used for 2GHz, 5GHz, and 6GHz (and by extension
the 'LC' band) as it relies on the channel type which is only
relevant to those specific bands.
To reduce some confusion, create a generic helper for creating the
default chandef that makes sense for all supported bands.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260312045804.362974-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Delete stale station links announced in the reconfiguration IE
transmitted by the AP in the beacon frames.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260309-mac80211-reconf-remove-sta-link-v2-1-1582aac720c6@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to introduce NPCA later, split the control frequency
check out of cfg80211_chandef_valid().
Link: https://patch.msgid.link/20260303152641.11b31e4878a7.I534669506008e12ffcd6c115161777e528fdc838@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For NPCA, we need to treat the channel request differently
for AP and other interfaces (APs can share NPCA, under the
assumption that userspace will set them up with the same
BSS color.) This is difficult if we have to check against
a chanreq made up from the chanctx, but this isn't a code
path that needs to be highly optimised, so just always use
the (originally) recheck functionality to check against
all users of the chanctx.
Link: https://patch.msgid.link/20260303152641.1a3ff6ead82b.I486f1a94b9a32e0b045815cbbb22679c8cef56e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We don't need to duplicate the macros, just make a generic
one that gets the name prefix to be used, and use that to
create the others. While at it, add the puncturing bitmap
to the trace and simplify the ternary expressions.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303152641.ca32d70055f8.I8138a31ceb75715d928d807554288baccc33cd8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When in strict mode, validate that the HE 6 GHz operation is
valid even when EHT operation is used instead. This checks
that APs are advertising correct information for HE clients,
without testing with such clients.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260303150832.74b934163b99.If4d1db3f39c37900cf0d0f4669cd5f8b677daaa0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The beacon doesn't contain the full UHR operation, a number
of fields (such as NPCA) are only partially there. Add a new
attribute to contain the full information, so it's available
to the driver/mac80211.
Link: https://patch.msgid.link/20260303221710.866bacf82639.Iafdf37fb0f4304bdcdb824977d61e17b38c47685@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function netlink_clear_multicast_users() was removed as unused
in commit 2173f8d953e7 ("netlink: cleanup tap related functions").
Update the comment in netlink_change_ngroups() to remove the stale
reference, replacing it with a general description of the behavior
while preserving the warning.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260311133519.688-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If mpls_init() fails after registering mpls_dev_notifier, it never
gets removed. Add the missing unregister_netdevice_notifier() call to
the error handling path.
Fixes: 5be2062e3080 ("mpls: Handle error of rtnl_register_module().")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/7c55363c4f743d19e2306204a134407c90a69bbb.1773228081.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a static key to bypass skb_attempt_defer_free() steps
if net.core.skb_defer_max is set to zero.
Main benefit is the atomic_long_inc_return() avoidance.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260311191340.1996888-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a bug [1], and the reproducer is available at [2].
ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN,
TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects
calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING
(-ECONNREFUSED), but lacks a check for TCP_SYN_SENT.
When rose_connect() is called a second time while the first connection
attempt is still in progress (TCP_SYN_SENT), it overwrites
rose->neighbour via rose_get_neigh(). If that returns NULL, the socket
is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL.
When the socket is subsequently closed, rose_release() sees
ROSE_STATE_1 and calls rose_write_internal() ->
rose_transmit_link(skb, NULL), causing a NULL pointer dereference.
Per connect(2), a second connect() while a connection is already in
progress should return -EALREADY. Add this missing check for
TCP_SYN_SENT to complete the state validation in rose_connect().
[1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271
[2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+d00f90e0af54102fb271@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69694d6f.050a0220.58bed.0027.GAE@google.com/T/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260311070611.76913-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a peer MEP is being deleted, cancel_delayed_work_sync() is called
on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in
softirq context under rcu_read_lock (without RTNL) and can re-schedule
ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync()
returning and kfree_rcu() being called.
The following is a simple race scenario:
cpu0 cpu1
mep_delete_implementation()
cancel_delayed_work_sync(ccm_rx_dwork);
br_cfm_frame_rx()
// peer_mep still in hlist
if (peer_mep->ccm_defect)
ccm_rx_timer_start()
queue_delayed_work(ccm_rx_dwork)
hlist_del_rcu(&peer_mep->head);
kfree_rcu(peer_mep, rcu);
ccm_rx_work_expired()
// on freed peer_mep
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync() in both peer MEP deletion paths, so
that subsequent queue_delayed_work() calls from br_cfm_frame_rx()
are silently rejected.
The cc_peer_disable() helper retains cancel_delayed_work_sync()
because it is also used for the CC enable/disable toggle path where
the work must remain re-schedulable.
Fixes: dc32cbb3dbd7 ("bridge: cfm: Kernel space implementation of CFM. CCM frame RX added.")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/abBgYT5K_FI9rD1a@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 4fa86555d1cd ("genetlink: piggy back on resv_op to default to
a reject policy") added genl_policy_reject_all to ensure that ops
without an explicit policy reject all attributes rather than silently
accepting them. This change was applied to net.
When split ops were later introduced in net-next in
commit b8fd60c36a44 ("genetlink: allow families to use split ops directly"),
genl_op_fill_in_reject_policy_split() was added and called from
genl_op_from_split() (used for policy dumping and registration).
However, genl_get_cmd_split(), which is called for incoming messages,
copies split_ops entries as-is without applying the reject policy.
This means that split ops without policy accept all inputs.
This looks like an omission / mistake made when splitting the changes
between net and net-next. Let's try to re-introduce the checking.
Not considering this a fix given the regression potential.
If anyone reports issues we should probably fill in fake policies
for specific ops rather than reverting this.
Link: https://patch.msgid.link/20260311032839.417748-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 4fa86555d1cd ("genetlink: piggy back on resv_op to default to
a reject policy") added genl_policy_reject_all to ensure that ops
without an explicit policy reject all attributes rather than silently
accepting them.
The reject policy had maxattr of 1. Passing info->attrs of size 2
may surprise families. Devlink, for instance, assumes that if
info->attrs is set it's safe to access DEVLINK_ATTR_BUS_NAME (1)
and DEVLINK_ATTR_DEV_NAME (2).
Before plugging reject policies into split ops we need to make sure
the genetlink code will not populate info->attrs if family
had no explicit policy for the op.
While even shared code paths within the families can figure out
that given op has no policy fairly easily themselves, passing attrs
with fixed size of 2 feels fairly useless and error prone.
This change has no user-visible impact, reject attrs are not
reported to the user space via getpolicy. We do have to remove
the safety check in netlink_policy_dump_get_policy_idx()
but it seems to have been there to catch likely faulty input,
the code can handle maxattr = 0 just fine.
Link: https://patch.msgid.link/20260311032839.417748-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Igor Ushakov reported that GC purged the receive queue of
an alive socket due to a race with MSG_PEEK with a nice repro.
This is the exact same issue previously fixed by commit
cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").
After GC was replaced with the current algorithm, the cited
commit removed the locking dance in unix_peek_fds() and
reintroduced the same issue.
The problem is that MSG_PEEK bumps a file refcount without
interacting with GC.
Consider an SCC containing sk-A and sk-B, where sk-A is
close()d but can be recv()ed via sk-B.
The bad thing happens if sk-A is recv()ed with MSG_PEEK from
sk-B and sk-B is close()d while GC is checking unix_vertex_dead()
for sk-A and sk-B.
GC thread User thread
--------- -----------
unix_vertex_dead(sk-A)
-> true <------.
\
`------ recv(sk-B, MSG_PEEK)
invalidate !! -> sk-A's file refcount : 1 -> 2
close(sk-B)
-> sk-B's file refcount : 2 -> 1
unix_vertex_dead(sk-B)
-> true
Initially, sk-A's file refcount is 1 by the inflight fd in sk-B
recvq. GC thinks sk-A is dead because the file refcount is the
same as the number of its inflight fds.
However, sk-A's file refcount is bumped silently by MSG_PEEK,
which invalidates the previous evaluation.
At this moment, sk-B's file refcount is 2; one by the open fd,
and one by the inflight fd in sk-A. The subsequent close()
releases one refcount by the former.
Finally, GC incorrectly concludes that both sk-A and sk-B are dead.
One option is to restore the locking dance in unix_peek_fds(),
but we can resolve this more elegantly thanks to the new algorithm.
The point is that the issue does not occur without the subsequent
close() and we actually do not need to synchronise MSG_PEEK with
the dead SCC detection.
When the issue occurs, close() and GC touch the same file refcount.
If GC sees the refcount being decremented by close(), it can just
give up garbage-collecting the SCC.
Therefore, we only need to signal the race during MSG_PEEK with
a proper memory barrier to make it visible to the GC.
Let's use seqcount_t to notify GC when MSG_PEEK occurs and let
it defer the SCC to the next run.
This way no locking is needed on the MSG_PEEK side, and we can
avoid imposing a penalty on every MSG_PEEK unnecessarily.
Note that we can retry within unix_scc_dead() if MSG_PEEK is
detected, but we do not do so to avoid hung task splat from
abusive MSG_PEEK calls.
Fixes: 118f457da9ed ("af_unix: Remove lock dance in unix_peek_fds().")
Reported-by: Igor Ushakov <sysroot314@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260311054043.1231316-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc4).
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
db25c42c2e1f9 ("net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ")
dff1c3164a692 ("net/mlx5e: SHAMPO, Always calculate page size")
https://lore.kernel.org/aa7ORohmf67EKihj@sirena.org.uk
drivers/net/ethernet/ti/am65-cpsw-nuss.c
840c9d13cb1ca ("net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support")
a23c657e332f2 ("net: ethernet: ti: am65-cpsw: Use also port number to identify timestamps")
https://lore.kernel.org/abK3EkIXuVgMyGI7@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client fixes from Anna Schumaker:
- Fix NFS KConfig typos
- Decrement re_receiving on the early exit paths
- return EISDIR on nfs3_proc_create if d_alias is a dir
* tag 'nfs-for-7.0-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix NFS KConfig typos
xprtrdma: Decrement re_receiving on the early exit paths
nfs: return EISDIR on nfs3_proc_create if d_alias is a dir
|
|
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled.
Fixes: 4e8402a3f884 ("[Bluetooth] Retrieve L2CAP features mask on connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure.
Reported-by: syzbot+14b6d57fb728e27ce23c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14b6d57fb728e27ce23c
Fixes: ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/x86/kernel/signal.c:337 (discriminator 1))
[ 97.810990] ? __pfx_arch_do_signal_or_restart (arch/x86/kernel/signal.c:334)
[ 97.811021] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811055] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811078] ? ksys_read (fs/read_write.c:707)
[ 97.811106] ? __pfx_ksys_read (fs/read_write.c:707)
[ 97.811137] exit_to_user_mode_loop (kernel/entry/common.c:66 kernel/entry/common.c:98)
[ 97.811169] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.811192] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811215] ? trace_hardirqs_off (./include/trace/events/preemptirq.h:36 (discriminator 33) kernel/trace/trace_preemptirq.c:95 (discriminator 33) kernel/trace/trace_preemptirq.c:90 (discriminator 33))
[ 97.811240] do_syscall_64 (./include/linux/irq-entry-common.h:226 ./include/linux/irq-entry-common.h:256 ./include/linux/entry-common.h:325 arch/x86/entry/syscall_64.c:100)
[ 97.811268] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811292] ? exc_page_fault (arch/x86/mm/fault.c:1480 (discriminator 3) arch/x86/mm/fault.c:1527 (discriminator 3))
[ 97.811318] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 97.811338] RIP: 0033:0x445cfe
[ 97.811352] Code: Unable to access opcode bytes at 0x445cd4.
Code starting with the faulting instruction
===========================================
[ 97.811360] RSP: 002b:00007f65c41c6dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 97.811378] RAX: fffffffffffffe00 RBX: 00007f65c41c76c0 RCX: 0000000000445cfe
[ 97.811391] RDX: 0000000000000400 RSI: 00007f65c41c6e40 RDI: 0000000000000004
[ 97.811403] RBP: 00007f65c41c7250 R08: 0000000000000000 R09: 0000000000000000
[ 97.811415] R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffe8
[ 97.811428] R13: 0000000000000000 R14: 00007fff780a8c00 R15: 00007f65c41c76c0
[ 97.811453] </TASK>
[ 98.402453] ==================================================================
[ 98.403560] BUG: KASAN: use-after-free in __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.404541] Read of size 8 at addr ffff888113ee40a8 by task khidpd_00050004/1430
[ 98.405361]
[ 98.405563] CPU: 1 UID: 0 PID: 1430 Comm: khidpd_00050004 Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 98.405588] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 98.405600] Call Trace:
[ 98.405607] <TASK>
[ 98.405614] dump_stack_lvl (lib/dump_stack.c:122)
[ 98.405641] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 98.405667] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.405691] ? __virt_addr_valid (arch/x86/mm/physaddr.c:55)
[ 98.405724] ? __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.405748] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 98.405778] ? __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.405807] __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.405832] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 98.405859] ? l2cap_unregister_user (./include/linux/list.h:381 (discriminator 2) net/bluetooth/l2cap_core.c:1723 (discriminator 2))
[ 98.405888] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 98.405915] ? __pfx___mutex_lock (kernel/locking/mutex.c:775)
[ 98.405939] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.405963] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 98.405984] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 98.406015] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406038] ? lock_release (kernel/locking/lockdep.c:5536 kernel/locking/lockdep.c:5889 kernel/locking/lockdep.c:5875)
[ 98.406061] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406085] ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:119 ./arch/x86/include/asm/irqflags.h:159 ./include/linux/spinlock_api_smp.h:178 kernel/locking/spinlock.c:194)
[ 98.406107] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406130] ? __timer_delete_sync (kernel/time/timer.c:1592)
[ 98.406158] ? l2cap_unregister_user (./include/linux/list.h:381 (discriminator 2) net/bluetooth/l2cap_core.c:1723 (discriminator 2))
[ 98.406186] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406210] l2cap_unregister_user (./include/linux/list.h:381 (discriminator 2) net/bluetooth/l2cap_core.c:1723 (discriminator 2))
[ 98.406263] hidp_session_thread (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/linux/kref.h:64 net/bluetooth/hidp/core.c:996 net/bluetooth/hidp/core.c:1305)
[ 98.406293] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.406323] ? kthread (kernel/kthread.c:433)
[ 98.406340] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.406370] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406393] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 98.406424] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.406453] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406476] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:79 (discriminator 1))
[ 98.406499] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406523] ? kthread (kernel/kthread.c:433)
[ 98.406539] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406565] ? kthread (kernel/kthread.c:433)
[ 98.406581] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.406610] kthread (kernel/kthread.c:467)
[ 98.406627] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.406645] ret_from_fork (arch/x86/kernel/process.c:164)
[ 98.406674] ? __pfx_ret_from_fork (arch/x86/kernel/process.c:153)
[ 98.406704] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406728] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.406747] ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
[ 98.406774] </TASK>
[ 98.406780]
[ 98.433693] The buggy address belongs to the physical page:
[ 98.434405] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888113ee7c40 pfn:0x113ee4
[ 98.435557] flags: 0x200000000000000(node=0|zone=2)
[ 98.436198] raw: 0200000000000000 ffffea0004244308 ffff8881f6f3ebc0 0000000000000000
[ 98.437195] raw: ffff888113ee7c40 0000000000000000 00000000ffffffff 0000000000000000
[ 98.438115] page dumped because: kasan: bad access detected
[ 98.438951]
[ 98.439211] Memory state around the buggy address:
[ 98.439871] ffff888113ee3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 98.440714] ffff888113ee4000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.441580] >ffff888113ee4080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.442458] ^
[ 98.443011] ffff888113ee4100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.443889] ffff888113ee4180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.444768] ==================================================================
[ 98.445719] Disabling lock debugging due to kernel taint
[ 98.448074] l2cap_conn_free: freeing conn ffff88810c22b400
[ 98.450012] CPU: 1 UID: 0 PID: 1430 Comm: khidpd_00050004 Tainted: G B 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 98.450040] Tainted: [B]=BAD_PAGE
[ 98.450047] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 98.450059] Call Trace:
[ 98.450065] <TASK>
[ 98.450071] dump_stack_lvl (lib/dump_stack.c:122)
[ 98.450099] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 98.450125] l2cap_conn_put (net/bluetooth/l2cap_core.c:1822)
[ 98.450154] session_free (net/bluetooth/hidp/core.c:990)
[ 98.450181] hidp_session_thread (net/bluetooth/hidp/core.c:1307)
[ 98.450213] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.450271] ? kthread (kernel/kthread.c:433)
[ 98.450293] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.450339] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450368] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 98.450406] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.450442] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450471] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:79 (discriminator 1))
[ 98.450499] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450528] ? kthread (kernel/kthread.c:433)
[ 98.450547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450578] ? kthread (kernel/kthread.c:433)
[ 98.450598] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.450637] kthread (kernel/kthread.c:467)
[ 98.450657] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.450680] ret_from_fork (arch/x86/kernel/process.c:164)
[ 98.450715] ? __pfx_ret_from_fork (arch/x86/kernel/process.c:153)
[ 98.450752] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450782] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.450804] ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
[ 98.450836] </TASK>
Fixes: b4f34d8d9d26 ("Bluetooth: hidp: add new session-management helpers")
Reported-by: soufiane el hachmi <kilwa10@gmail.com>
Tested-by: soufiane el hachmi <kilwa10@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly.
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
While introducing hci_le_create_conn_sync the functionality
of hci_connect_le was ported to hci_le_create_conn_sync including
the disable of the scan before starting the connection.
When this code was run non synchronously the immediate call that was
setting the flag HCI_LE_SCAN_INTERRUPTED had an impact. Since the
completion handler for the LE_SCAN_DISABLE was not immediately called.
In the completion handler of the LE_SCAN_DISABLE event, this flag is
checked to set the state of the hdev to DISCOVERY_STOPPED.
With the synchronised approach the later setting of the
HCI_LE_SCAN_INTERRUPTED flag has not the same effect. The completion
handler would immediately fire in the LE_SCAN_DISABLE call, check for
the flag, which is then not yet set and do nothing.
To fix this issue and make the function call work as before, we move the
setting of the flag HCI_LE_SCAN_INTERRUPTED before disabling the scan.
Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
iso-tester defer tests seem to fail with hci_conn_hash_lookup_cig
being unable to resolve a cig in set_cig_params_sync due a race
where it is run immediatelly before hci_bind_cis is able to set
the QoS settings into the hci_conn object.
So this moves the assigning of the QoS settings to be done directly
by hci_le_set_cig_params to prevent that from happening again.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The last test step ("Test with Invalid public key X and Y, all set to
0") expects to get an "DHKEY check failed" instead of "unspecified".
Fixes: 6d19628f539f ("Bluetooth: SMP: Fail if remote and local public keys are identical")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
