| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
nt->buf is exactly MAX_PRINT_CHUNK bytes, but scnprintf() reserves one
byte for its NUL terminator, so a non-fragmented payload of exactly
MAX_PRINT_CHUNK loses its last byte (emitted as a stray NUL in the
release path). Grow nt->buf to MAX_PRINT_CHUNK + 1 and bound the
scnprintf() calls with sizeof(nt->buf); the transmitted length stays
capped at MAX_PRINT_CHUNK.
Alternatively, nt->buf could be left at MAX_PRINT_CHUNK and the NUL byte
reserved by routing exactly-MAX_PRINT_CHUNK payloads to fragmentation
('len < MAX_PRINT_CHUNK'), at the cost of fragmenting those messages.
But it would look less sane, thus the current approach.
Fixes: c62c0a17f9b7 ("netconsole: Append kernel version to message")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616-max_print_chunk-v1-1-8dc125d67083@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MACB found in the Raspberry Pi RP1 suffers from sporadic stalls on
the TX queue.
While the exact root cause is not yet fully understood, it is likely
related to a hardware issue where a TSTART write to the NCR register
is missed, preventing the transmission from being kicked off.
Implement a timeout callback to handle TX queue stalls, triggering the
existing restart mechanism to recover.
Link: https://lore.kernel.org/all/20260514215459.36109-1-lukasz@raczylo.com/
Fixes: dc110d1b23564 ("net: cadence: macb: Add support for Raspberry Pi RP1 ethernet controller")
Signed-off-by: Lukasz Raczylo <lukasz@raczylo.com>
Co-developed-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Steffen Jaeckel <sjaeckel@suse.de>
Co-developed-by: Andrea della Porta <andrea.porta@suse.com>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/468f480454a314303bac6a54780b153f689f2267.1781598350.git.andrea.porta@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash.
Fixes: 6d5b601d52a2 ("net: airoha: ppe: Dynamically allocate foe_check_time array in airoha_ppe struct")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178161119471.2163752.14373384830691569758@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pch_gbe_alloc_tx_buffers() allocates an skb for each TX descriptor and
then passes the returned pointer to skb_reserve(). If netdev_alloc_skb()
fails, skb_reserve() dereferences NULL.
Make pch_gbe_alloc_tx_buffers() return an error when an skb allocation
fails. On failure, let pch_gbe_alloc_tx_buffers() clean the partially
allocated TX ring before returning the error. While bringing the device
up, release the RX buffer pool through a shared cleanup helper before
unwinding the IRQ setup.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260615125043.3537046-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit refactored the prechangeupper event handling but
failed to actually return an error in case
dpaa2_switch_prevent_bridging_with_8021q_upper() detected a 802.1q upper
on a port which tries to join a bridge. Fix this by returning err
instead of 0.
Fixes: 45035febc495 ("net: dpaa2-switch: refactor prechangeupper sanity checks")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260616105430.3725910-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised.
Fixes: 0c716703965f ("virtio-net: fix received length check in big packets")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20260616042837.2249468-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
strncpy() has been a persistent source of bugs due to its ambiguous
intended usage and frequently counter-intuitive semantics: it may not
NUL-terminate the destination, and it unconditionally zero-pads to the
full length, which isn't always needed. All former callers have been
migrated[1] to:
- strscpy() for NUL-terminated destinations
- strscpy_pad() for NUL-terminated destinations needing zero-padding
- strtomem_pad() for non-NUL-terminated fixed-width fields
- memcpy_and_pad() for bounded copies with explicit padding
- memcpy() for known-length copies
Remove the generic implementation, its declaration, the FORTIFY_SOURCE
wrapper, and associated tests.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull CXL updates from Dave Jiang:
"A collection of CXL fixes and changes, including an update to
MAINTAINERS to add Ming Li as a CXL subsystem reviewer.
There's also a series to introduce devm_cxl_probe_mem() core API in
order to pave the way for CXL type2 device drivers to setup and
retrieve CXL region resource during probe"
* tag 'cxl-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (26 commits)
cxl: Add dummy function for cxl_memdev_attach_region for !CONFIG_CXL_REGION
cxl/region: Introduce devm_cxl_probe_mem()
cxl/memdev: Introduce cxl_class_memdev_type
cxl/memdev: Pin parents for entire memdev lifetime
cxl/region: Resolve region deletion races
cxl/region: Block region delete during region creation
cxl/region: Fill first free targets[] slot during auto-discovery
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
tools/testing/cxl: Resolve auto-region decoder targets like real HW
cxl: Align interleave decode/encode helpers with their callers
cxl/test: Add check after kzalloc() memory in alloc_mock_res()
cxl/test: Unregister cxl_acpi in cxl_test_init() error path
cxl/test: Zero out LSA backing memory to avoid leaking to user
cxl/test: Fix integer overflow in mock LSA bounds checks
cxl/test: Verify cmd->size_in before accessing payload
cxl/port: update reference to removed CONFIG_PROVE_CXL_LOCKING
cxl/region: Avoid variable shadowing in region attach paths
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses
cxl/pci: Fix the incorrect check of pci_read_config_word() return
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm/dax updates from Alison Schofield:
- Fix a race condition and a couple of static analysis issues in BTT
- Use sysfs_emit() in preparation for removal of cpumap_print_to_pagebuf()
- Escalate a dev_dbg to dev_err in a resource conflict message
- MAINTAINER file updates
* tag 'libnvdimm-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
MAINTAINERS: nvdimm: Include maintainer profile
MAINTAINERS: Update address for Ira Weiny
MAINTAINERS: Add maintainer info for libnvdimm and DAX
nvdimm: Use sysfs_emit() for cpumask show callback
dax/bus: Upgrade resource conflict message to dev_err() in alloc_dax_region()
nvdimm/btt: Free arenas on btt_init() error paths
nvdimm/btt: Free arena sub-allocations on discover_arenas() error path
nvdimm/btt: Handle preemption in BTT lane acquisition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Maxim MAX25014: Add support for the Maxim MAX25014 4-channel
automotive grade backlight driver IC
Improvements & Fixes:
- Maintainers: Add the Congatec Board Controller backlight driver to
its corresponding entry
- Congatec Board Controller: Remove redundant X86 dependency from the
backlight driver
- Kinetic KTD2801: Enable BL_CORE_SUSPENDRESUME to ensure the chip is
powered off during suspend
Cleanups & Refactoring:
- Core: Use named initializers for i2c_device_id arrays to improve
readability and robustness
Device Tree Binding Updates:
- Maxim MAX25014: Add device tree bindings for the Maxim MAX25014
backlight controller"
* tag 'backlight-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Use named initializers for arrays of i2c_device_data
MAINTAINERS: Add cgbc backlight driver
backlight: cgbc: Remove redundant X86 dependency
backlight: Add max25014atg backlight
dt-bindings: backlight: Add max25014 support
backlight: ktd2801: Enable BL_CORE_SUSPENDRESUME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes flash and RGB LED controllers
- Texas Instruments:
- LP5812: Add support for the TI LP5812 LED driver
- LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
Improvements & Fixes:
- Core:
- Adjust the brightness sysfs node documentation to clarify that
only decimal values are accepted
- Fix a race condition in the software blink logic when stopping
blinking and setting brightness simultaneously
- Introduce the `multi_max_intensity` sysfs attribute for
multicolor LEDs to support hardware-based global brightness
control
- Replace OF-based device lookup with firmware node equivalents
to support ACPI and software nodes
- Return `ENODATA` when reading brightness from
hardware-controlled LEDs
- Set the coherent DMA mask to zero for the Samsung PMIC device
to suppress unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
Makefile that prevented the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure
correct endianness and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
GPIOs between the LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when
changing brightness to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across
flash LED config options
- Qualcomm LPG: Optimize memory allocation by combining main
structure and channels into a single allocation using flexible
array members
- Texas Instruments
- LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TPS6131x: Increase the overvoltage protection threshold to 6V
to avoid false triggers with 5V input supplies
- Userspace LEDs (uLEDs):
- Fix a potential buffer overread by using `strnchr()` for name
string validation
- Return `-EFAULT` on `copy_to_user()` failure to properly handle
read errors
Cleanups & Refactoring:
- Core:
- Convert various `i2c_device_id` arrays to use named
initializers for improved robustness and readability
- Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
the `multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
declarations next to the ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
Device Tree Binding Updates:
- Class: Document the keyboard backlight LED class naming
conventions, including a new scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2
and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
used in Xiaomi Redmi Note 8
- Samsung S2M series:
- Document the flash LED device bindings for Samsung S2M series
PMICs
- Document the pattern behavior for Samsung S2M series PMIC RGB
- S2MU005: Add device tree bindings for the S2MU005 PMIC,
including its flash and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
flash drivers"
* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: tps6131x: Increase overvoltage protection threshold to 6V
leds: Fix sysfs ABI date
leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
leds: uleds: Fix potential buffer overread
leds: Use named initializers for arrays of i2c_device_data
leds: uleds: Return -EFAULT on copy_to_user() failure
leds: core: Report ENODATA for brightness of hardware controlled LED
leds: class: Use firmware nodes for device lookup
Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
leds: flash: Add support for Samsung S2M series PMIC flash LED device
dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
leds: core: Fix race condition for software blink
leds: Adjust documentation of brightness sysfs node
leds: dac124s085: Declare SPI command word as __le16
leds: Introduce the multi_max_intensity sysfs attribute
dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
leds: Add support for TI LP5860 LED driver chip
Documentation: leds: leds-class: Document keyboard backlight LED class naming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Renesas RSMU: Add support for the IDT 8a34002 Clock Matrix
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes charger, MUIC, flash and RGB LED controllers
- SpacemiT P1: Add a reboot cell for the SpacemiT P1 chip
- Texas Instruments BQ25792: Add support for the TI BQ25792 charger
manager
Improvements & Fixes:
- Core: Unify the user-visible company name to "Qualcomm" across
various config options
- ChromeOS EC:
- Delay `dev_set_drvdata()` until the probe process has
successfully completed to avoid use-after-free issues
- Prevent adding `cros_ec_ucsi` as an MFD sub-device if it is
already defined in Device Tree or ACPI
- Cirrus Logic CS42L43: Add a sanity check for firmware size to
prevent out-of-bounds memory access during firmware loading
- Cirrus Logic CS5535: Associate the GPIO cell with a dedicated
software node to support board files requesting GPIOs
- Maxim MAX77620: Modernize poweroff handling by converting to the
sys-off API
- Qualcomm RPM: Add the missing QDSS clock resource for the MSM8960
SoC
- Renesas RSMU: Fix page register setup for the 8A3400x family by
correctly calculating the page address
- Renesas RZ/MTU3:
- Make the reset line optional to support newer SoC variants
(RZ/T2H, RZ/N2H)
- Modernize the driver by using device-managed APIs for reset
control and device addition
- Samsung Core: Set the coherent DMA mask to zero for the Samsung
PMIC device to suppress unnecessary "DMA mask not set" messages
- Silicon Motion SM501: Fix a reference leak on failed device
registration by properly dropping the platform device reference
- Texas Instruments:
- TPS65219: Make poweroff handler registration conditional on the
"system-power-controller" Device Tree property
- TPS6586x: Fix Device Tree node reference counting by manually
bumping the refcount for sub-devices
- TPS65910: Add return value checking for the dummy I2C transfer
used to work around silicon erratum SWCZ010
- TWL4030: Update board-specific checks to use Device Tree
compatibles instead of legacy machine IDs
Cleanups & Refactoring:
- Core: Consistently define `pci_device_id` arrays using named
initializers across various Intel and Silicon Motion drivers
- Maintainers: Shift maintenance of Samsung PMIC drivers to André
Draszik
- Maxim MAX77759: Improve code style by reformatting the IRQ table
and refining macro comments
- MEN MENF21BMC / Texas Instruments TWL: Correctly treat
`i2c_check_functionality()` as returning a boolean status
- Rohm BD72720: Drop the non-existent BUCK11 ID to improve code
clarity
- Silicon Labs Si476x: Fix various spelling mistakes in driver
comments
- Spreadtrum SC27xx: Transition to `devm_mfd_add_devices()` and
separate MFD cell tables for each PMIC model
- Timberdale: Move GPIO pin definitions into the driver and
transition to using a software node for the GPIO cell
- Wolfson WM8994: Remove dead legacy-GPIO code and its associated
`irq_gpio` member
Device Tree Binding Updates:
- Aspeed AST2x00: Document the AST2700 SCU0 and add support for its
SoC0/SoC1 pin controllers
- Hisilicon Hi655x: Convert the Hi655x PMIC binding from text format
to YAML DT schema
- Khadas MCU: Add a new compatible and fan-supply property for the
Khadas VIM4 MCU
- MediaTek MT6397: Add support for the MT6365 PMIC and document
regulator supplies for the MT6359 variant
- Qualcomm TCSR: Add compatibles for Nord and IPQ5210 TCSR blocks
- Renesas RZ/G3L: Revert the addition of the
`renesas,r9a08g046-lvds-cmn` compatible string due to documentation
errors
- Samsung S2MU005: Document the S2MU005 PMIC and its sub-devices
(charger, MUIC, flash and RGB LEDs)
- Spreadtrum SC2731: Include regulator bindings for the SC2730
variant
- STMPE: Fix the schema by marking 'compatible' and '#pwm-cells' as
required for the PWM subnode
- Texas Instruments BQ257xx: Expand the BQ25703A binding to include
the BQ25792 variant
Removals:
- Motorola EZX PCAP: Remove the unused and non-functional driver for
Motorola EZX phones"
* tag 'mfd-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
dt-bindings: mfd: syscon: Revert renesas,r9a08g046-lvds-cmn
dt-bindings: mfd: st,stmpe: Add missing properties for PWM subnode
mfd: rz-mtu3: Make reset optional
mfd: rz-mtu3: Store &pdev->dev in local variable
mfd: rz-mtu3: Use local variable for reset
mfd: rz-mtu3: Use device-managed APIs
dt-bindings: mfd: aspeed,ast2x00-scu: Support AST2700 SoC1 pinctrl
mfd: tps6586x: Fix OF node refcount
dt-bindings: mfd: sprd,sc2731: Include SC2730 regulator bindings
mfd: twl4030-power: Update checks for specific boards to use the DT
dt-bindings: mfd: qcom,tcsr: Document the IPQ5210 TCSR block
mfd: qcom_rpm: Add msm8960 QDSS clock resource
mfd: si476x-i2c: Fix spelling mistakes in comments
mfd: max77620: Convert poweroff support to sys-off API
mfd: dt-bindings: mt6397: Add regulator supplies
dt-bindings: mfd: mediatek: mt6397: Add MT6365 PMIC support
dt-bindings: mfd: mediatek: mt6397: Add rtc for MT6359
mfd: cs42l43: Sanity check firmware size
mfd: qcom: Unify user-visible "Qualcomm" name
mfd: cros_ec: Delay dev_set_drvdata() until probe success
...
|
|
Turns out both CDCLK_CTL pipe select 0b110 (what Bspec lists for
pipe C on ICL) and 0b100 (what BSpec lists for pipe C on TGL+)
actually select pipe C on ICL. So we can get rid of the weird
ICL special case and just use the simpler TGL+ definition of
the pipe select bits.
This was reverse engineered with a hacked up intel_display_poller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-7-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Currently bxt_sanitize_cdclk() assumes that
bxt_cdclk_cd2x_pipe(INVALID_PIPE) gives us the full mask for
for the relevant bitfield. While that is true, it does make the
code a bit confusing to read. Introduce bxt_cdclk_cd2x_pipe_mask()
to make the situation a bit less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-6-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Document which CDCLK_CTL bits are relevant for which platforms.
Saves me from having to look this up in the spec every time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-5-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Use the modern REG_BIT/REG_GENMASK stuff to define the
CDCLK_CTL bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-4-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Make debugging a bit easier by printing out the specific reason
for the CDCLK sanitization. Currently one is forced to guess what
is actually happening.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-3-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
The GOP (and even Bspec on some platforms) is a bit inconsistent
on what the CDCLK_FREQ_DECIMAL divider should be. Currently any
mismatch there causes a full CDCLK PLL disable+re-enable, which
we really don't want to do if any displays are currently active.
Let's instead just reprogram CDCLK_FREQ_DECIMAL when that is the
only thing amiss. For any other (more serious) mismatch we still
punt to the full PLL reprogramming.
We also need to tweak the bxt_cdclk_cd2x_pipe() stuff a bit to
consistently select pipe==NONE since we have no idea which pipes
are enabled at this point. Since we're not actually changing the
CDCLK frequency here we don't need to sync the update to any
pipe.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16209
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-2-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
"Core:
- semantic cleanup fixes for 'hid_device_id::driver_data' (Pawel
Zalewski)
Multitouch:
- UX improvement fixes for Yoga Book 9 (Dave Carey)
Logitech:
- fix for high resolution scrolling for Logitech HID++ 2.0 devices
(Lauri Saurus)
CP2112:
- fix for cp2112 firmware-based speed configuration, if available
(Danny Kaehn)
Wacom:
- memory corruption and scheduling while atomic and error fixes and
error handling fixes (Jinmo Yang, Myeonghun Pak)
New device support:
- OneXPlayer (Derek J. Clark)
- HORI Wireless Switch Pad (Hector Zelaya)
- Rakk Dasig X (Karl Cayme)
And other assorted small fixes and device ID additions"
* tag 'hid-for-linus-2026061601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: hidpp: fix potential UAF in hidpp_connect_event()
HID: logitech-hidpp: sync wheel multiplier on wheel mode changes
HID: intel-thc-hid: intel-quickspi: reset touch IC on system resume
HID: uhid: convert to hid_safe_input_report()
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
HID: nintendo: add support for HORI Wireless Switch Pad
HID: multitouch: Honor ContactCount for Yoga Book 9 to suppress ghost contacts
HID: pidff: Use correct effect type in effect update
HID: wacom: stop hardware after post-start probe failures
HID: core: demote warning to debug level
HID: lenovo: Use KEY_PERFORMANCE capability for ThinkPad X12 Tab Gen 2
HID: lenovo: Add support for ThinkPad X13 Folio keyboard
HID: cp2112: Configure I2C bus speed from firmware
HID: cp2112: Add fwnode support
HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()
HID: Input: Add battery list cleanup with devm action
HID: logitech-hidpp: remove excess kernel-doc member in hidpp_scroll_counter
HID: wacom: use cleanup.h for wacom_wac_queue_flush() buffer management
HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()
HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert
...
|
|
rpcif_spi_resume() currently passes the SPI controller device to
rpcif_hw_init(), but the function should be called with the RPC
interface device.
Retrieve the rpcif private data from the SPI controller and pass
rpc->dev instead. Also propagate the return value of rpcif_hw_init() so
that a failure during resume is properly reported rather than silently
ignored.
Fixes: ad4728740bd6 ("spi: rpc-if: Add resume support for RZ/G3E")
Signed-off-by: Quang Nguyen <quang.nguyen.wx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260618081932.172168-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pci_host_common_init() is used by several generic ECAM host drivers.
After PCI core changes around pci_flags and preserve_config, these hosts
no longer opted into full bus number reassignment the way they did
before, which broke enumeration of devices on a Marvell CN106XX board.
When PCI_PROBE_ONLY is not set, add PCI_REASSIGN_ALL_BUS so
pci_scan_bridge_extend() takes the reassignment path: bus numbers can be
assigned from firmware EA data (e.g. pci_ea_fixed_busnrs()). Skip the
flag in probe-only mode so existing assignments are not overridden.
Fixes: 7246a4520b4b ("PCI: Use preserve_config in place of pci_flags")
Closes: https://lore.kernel.org/all/abkqm_LCd9zAM8cW@rkannoth-OptiPlex-7090/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add problem report link]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260414081730.3864372-1-rkannoth@marvell.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-8-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-10-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-7-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-6-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-3-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-2-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-5-18255117159@163.com
|
|
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260521161822.132996-4-18255117159@163.com
|
|
Commit b64aa11eb2dd ("PCI: Set bridge map_irq and swizzle_irq to default
functions") moved the assignment of default .map_irq() callback to
devm_of_pci_bridge_init() and removed the initialization of
'iproc_pcie::map_irq' in platform bus driver. This led to the callback
getting assigned the NULL pointer for platform bus driver, thereby breaking
the INTx functionality, since 'iproc_pcie::map_irq' overrides the
'pci_host_bridge::map_irq' callback in iproc_pcie_setup().
This issue only affected the iproc platform bus driver as this driver
relies on the default callback for non-PAXC controllers. iproc-brcm driver
was already providing the custom mapping function, so it was unaffected.
Restore the original (and intended) behaviour to use the default map_irq
function by removing the local 'iproc_pcie::map_irq' pointer and directly
assigning the 'pci_host_bridge::map_irq' callback in iproc-bcma driver.
This ensures that the default 'map_irq' callback is used for platform bus
driver and only iproc-brcm driver overrides it with a custom one.
Fixes: b64aa11eb2dd ("PCI: Set bridge map_irq and swizzle_irq to default functions")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Link: https://patch.msgid.link/20260430021628.1343154-1-mark.tomlinson@alliedtelesis.co.nz
|
|
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
|
|
Use u32-typed BIT and GENMASK helpers for PCIe interrupt register
masks. This keeps inverted masks in the same width as the registers
and avoids truncation warnings on 64-bit compile-test builds.
Fixes below and similar warnings:
drivers/pci/controller/pci-mvebu.c:316:21: error: implicit conversion from 'unsigned long' to 'u32' (aka 'unsigned int') changes value from 18446744069414584320 to 0 [-Werror,-Wconstant-conversion]
mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260526044016.1025613-1-rosenp@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Bump required Clang version to 23 (Marco), and add Clang context
analysis annotations (Bart)
- Use the ahci_nr_ports() helper in libahci (me)
- Fail to probe the ahci driver if the BAR size is smaller than the
required size to support CAP.NP (Number of Ports) (liyouhong)
- Move EXPORT_SYMBOL_GPL(ahci_do_softreset) to be just below the
function definition (Bart)
- Make ata_scsi_scan_host() schedule hotplug work on the
system_dfl_long_wq workqueue so that it can benefit from scheduler
task placement (Marco)
- Make ata_scsi_port_error_handler() schedule hotplug work on the
system_dfl_long_wq workqueue, such that the work always uses the same
workqueue (me)
- Use devm_platform_get_and_ioremap_resource() in pata_arasan_cf driver
(Rosen)
- Fix ata_exec_internal() to only release and acquire the EH mutex if
the calling function is the one holding the EH mutex (Bart)
- Use hweight_long() to count the port_map bits (TanZheng)
- Add COMPILE_TEST support for pata_ep93xx driver (Rosen)
- Drop unused assignments from pata_isapnp driver (Uwe)
- Extend existing JMicron PMP quirk to include JMicron JMS562 (Xu)
- Drop unused assignments of pci_device_id driver data (Uwe)
- Use named initializers for pci_device_id arrays (Uwe)
* tag 'ata-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: Use named initializers for pci_device_id arrays
ata: Drop unused assignments of pci_device_id driver data
ata: libata-pmp: add JMicron JMS562 quirk
ata: pata_isapnp: Drop unused assignments from pnp_device_id array
ata: pata_ep93xx: add COMPILE_TEST support
ata: pata_ep93xx: use unsigned long for data
ata: pata_ep93xx: avoid asm on non ARM
ata: Annotate functions in the issuing path with __must_hold()
ata: libata: Pass ap parameter directly to functions in the issuing path
ata: libata: Document when host->eh_mutex should be held
ata: libata: Add an argument to ata_eh_reset()
ata: ahci: use hweight_long() to count port_map bits
ata: libata: Fix ata_exec_internal()
ata: pata_arasan_cf: simplify ioremap
ata: libata-eh: queue hotplug work on the system_dfl_long_wq workqueue
ata: libata-scsi: Move long delayed work on system_dfl_long_wq
ata: ahci: Move EXPORT_SYMBOL_GPL(ahci_do_softreset)
ata: ahci: fail probe if BAR too small for claimed ports
ata: libahci: use ahci_nr_ports() helper
|
|
The backlight, when managed by the panel controller, could be powered by
an external regulator, and shutting down the regulator could power off
the backlight.
Add support for such a regulator. It's powered off when the backlight is
0 (either by setting brightness to 0 or setting bl_power), and powered
on when the backlight should be operating.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260608162622.403713-3-zhengxingda@iscas.ac.cn
|
|
As backlight powering on/off support will be added, more fields of the
panel context will be accessed in the backlight update function.
Pass the whole panel struct instead of the DSI device when creating the
backlight device.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260608162622.403713-2-zhengxingda@iscas.ac.cn
|
|
Add support for Ilitek ILI9488 DSI controller which is used in
FocusLCDs E35GH-I-MW800-CB 320x480 MIPI DSI panel. The mode timing
was adjusted after STM32MP157 testing. The previous 14.256 MHz mode
worked on AM62P, but was awkward for STM32 DSI/LTDC clock synthesis.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260617143245.372182-3-igor@reznichenko.net
|
|
This adds support for the ICNA3512 and ICNA3520 DDICs used in both the
AYN Odin 2 Portal and Ayaneo Pocket DS top panel respectively and for
for both the AYN Odin 3 and the AYN Thor top panel respectively.
These all have unique compatibles because the panels themselves are
likely unique hardware with only the ddic's and thus api and driver
handling shared.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260607-icna35xx-v4-2-64de514add34@gmail.com
|
|
The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
on the TD4310 controller IC. It measures approximately 5.5 inches
diagonally and is 1080x1920 in resolution.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260610144407.438846-5-macroalpha82@gmail.com
|
|
Don't populate the read-only array rates the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260608122427.48375-1-colin.i.king@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/827657abb02edb39bc90f7336194f614d383770e.1781688767.git.u.kleine-koenig@baylibre.com
|
|
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
reported:
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks.
Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260617154035.1199948-3-runyu.xiao@seu.edu.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
sch_irq_unmask() enables the GPIO IRQ and then updates the controller
state through sch_irq_mask_unmask(), which takes sch->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and
used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported:
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the SCH controller lock to raw_spinlock_t. The same lock is
also used by the GPIO direction and value callbacks, but those critical
sections only update MMIO-backed GPIO registers and do not contain
sleepable operations. Keeping this register lock non-sleeping is
therefore appropriate for the irqchip callbacks and does not change the
GPIO-side locking contract.
Fixes: 7a81638485c1 ("gpio: sch: Add edge event support")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260617154035.1199948-2-runyu.xiao@seu.edu.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
With optimized guardband, we need to take into account LOBF requirements
via intel_alpm_lobf_min_guardband().
Currently, we set has_lobf based not only on whether it is supported, but
also on whether PSR/fixed RR are ON. Since these features can switch ON and
OFF seamlessly, this may cause LOBF to change, resulting in a change in
guardband requirements, and eventually to a full modeset.
To avoid this, always account for LOBF if it is supported, in the
encoder->compute_config() stage. For this, allow has_lobf to be set
irrespective of PSR/Fixed RR. Later, in the encoder->compute_config_late()
stage, use the PSR/Fixed RR checks to set has_lobf to the final value.
Move the PSR/Fixed RR checks from intel_alpm_lobf_compute_config() to
intel_alpm_lobf_compute_config_late(), where we already account for other
LOBF constraints.
v2: Reset has_lobf if psr or VRR is ON in
intel_alpm_lobf_compute_config_late(). (Animesh)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260616080627.2136659-1-ankit.k.nautiyal@intel.com
|
|
intel_cx0_phy_check_hdmi_link_rate does not exist but is still
declared. Remove it.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260617041807.162927-1-suraj.kandpal@intel.com
|
|
There are monitors being sensitive to MSA and end up
blanking out when we override Vtotal, DP transcoder
uses TRANS_VTOTAL to derive MSA VTotal. Avoid overriding
crtc_vtotal to 1 on platform which supports VRR Timing
generator and always program VTOTAL from mode timing in
transcoder timing paths.
--v2:
- Remove write to crtc_state->hw.adjusted_mode.crtc_vtotal
during intel_vrr_get_config. (Ankit)
- Fix merge conflicts.
Bspec: 70001
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260617045850.862100-1-mitulkumar.ajitkumar.golani@intel.com
|
|
mlx5_query_mtppse() reads the Event Trigger Pin (MTPPSE) register but
reads the returned arm and mode values from the input buffer 'in'
instead of the output buffer 'out', so it always returns the values
that were written rather than the actual hardware state, making the
query useless.
The function has no in-tree callers. Remove it rather than fix it.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260615140406.1828-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
