| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The software LDAC trigger register is stored in the chip_info table as a
fixed register address. Devices with a multi-bank register architecture
select the trigger register based on the channel being updated, which a
single static address cannot express.
Convert sw_ldac_trig_reg into a function pointer that returns the
trigger register for a given channel, mirroring the input_ch_reg
callback.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The driver has a match table for the usb bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704151730.42772-1-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
al3010_scales[] encodes the highest gain range as {0, 1187200}.
For IIO_VAL_INT_PLUS_MICRO, the fractional part must be less than
1000000, so the scale 1.1872 should instead be represented as
{ 1, 187200 }.
Since write_raw() compares the value from userspace against this
table, writing the advertised 1.1872 scale never matches the malformed
entry and returns -EINVAL. As a result, the highest gain range cannot
be selected. Reading the scale in that state also reports the malformed
value.
Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The original code was using ndelay() twice. In one case the delay
is calculated as 1/3 of ADC clock and in the other as 80 ADC clocks.
But according to the comments in all cases it should be a multiplier
of the ADC clock, and not a fraction of it. Inadvertently
nxp_sar_adc_wait_for() takes the wrong case and spread it over
the code make it wrong in all places. Fix this by modifying a helper
to correctly use the multiplier.
Fixes: 7e5c0f97c66a ("iio: adc: nxp-sar-adc: Avoid division by zero")
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260416090122.758990-1-andriy.shevchenko%40linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stepan Ionichev <sozdayvek@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
When devm_request_threaded_irq() fails, probe logs the error and
then returns -EINVAL, dropping the real error code and breaking the
deferred-probe flow for -EPROBE_DEFER.
Return ret directly; the IRQ subsystem already prints on failure.
Fixes: 2335f0d7c790 ("iio: light: Added AMS tsl2591 driver implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Timestamps are made by measuring the chip clock using the watermark
interrupts. If we read more than watermark samples as done today, we
are reducing the period between interrupts and distort the time
measurement. Fix that by reading only watermark samples in the
interrupt case.
Fixes: 7f85e42a6c54 ("iio: imu: inv_icm42600: add buffer support in iio devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix PKEY_VERIFYPROTK ioctl key type handling by removing the generic
key-length based type check with its wrong bit-size calculation, and
leaving protected key verification to the pkey handler
- Fix monwriter buffer reuse by rejecting records that change the data
length, preventing out of bounds user copy into the kernel buffer
* tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/monwriter: Reject buffer reuse with different data length
pkey: Move keytype check from pkey api to handler
|
|
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
Cc: stable@vger.kernel.org
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://lore.kernel.org/r/20260610071045.3414828-1-zhaojinming@uniontech.com
[tomeu: Refactored error paths to use consolidated goto labels]
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result.
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://lore.kernel.org/r/20260524155716.90955-1-meatuni001@gmail.com
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error.
Fixes: 0810d5ad88a1 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Link: https://lore.kernel.org/r/6a454b48.6a8fa39a.27019b.984b@mx.google.com
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
|
|
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.
Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does.
Fixes: ebc4768ac497 ("add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260629121043.199487-1-maoyixie.tju@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
After a successful BALANCE/PARALLEL_SUBMIT extension on context
creation, error during processing of next user extension leaks
the siblings[] array. Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Cc: Faith Ekstrand <faith.ekstrand@collabora.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260701073030.44850-1-joonas.lahtinen@linux.intel.com
|
|
Avoid using intel_context_put() before intel_context_init() in
execlists_create_virtual() as the kref_put() inside would lead
to NULL deref on the IOCTL path when sched_engine allocation fails.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 3e28d37146db ("drm/i915: Move priolist to new i915_sched_engine object")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260701114513.221254-1-joonas.lahtinen@linux.intel.com
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm. This is large for rc2 but it's just a lot of
small fixes across a bunch of drivers, xe, amdgpu as usual, plus some
sashiko-inspired fixes for panthor, and some dma-fence updates.
core:
- kernel doc fix
- include types.h in drm_ras.h
dma-fence:
- fix NULL ptr dereference
- use correct callback
- make dma_fence_dedup_array more robust
dp:
- handle torn down topology gracefully
- fix kernel doc
i915:
- Input validation fixes for BIOS and EDID
- Fix HDCP code buffer overflow and seq_num_v monotonic increase check
- Fix near-NULL deref in i915_active during GFP_ATOMIC exhaustion
xe:
- Wedge from the timeout handler only after releasing the queue
- Fix a NULL pointer dereference
- Remove redundant exec_queue_suspended
- RTP / OA whitelist fixes
- Return error on non-migratable faults requiring devmem
- Skip FORCE_WC and vm_bound check for external dma-bufs
- Hold notifier lock for write on inject test path
- Drop bogus static from finish in force_invalidate
- Fix double-free of managed BO in error path
- Don't attempt to process FAST_REQ or EVENT relays
- Fix NPD in bo_meminfo
- Prevent invalid cursor access for purged BOs
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG
amdgpu:
- Soc24 aborted suspend fix
- Drop unecessary BUG() and BUG_ON() from error paths
- SCPM fix
- Power reporting fix
- DCE HDR fix
- UVD boundary checks
- VCN boundary checks
- VCE boundary checks
- DCN 4.2 fixes
- Large stack allocation fixes
- Fix aperture mapping leak
- UserQ fixes
- Ignore_damage_clips fix
- ACP fixes
- DC boundary checks
- GPUVM fixes
- JPEG idle check fixes
- Userptr fix
- GC 11.7 updates
- Non-4K page fix
- SMU 13 fixes
- DP alt mode fix
amdkfd:
- Boundary checks
- CRIU fixes
amdxdna:
- fix device removal issues
- fix use after free in debug BO
imagination:
- fix double call to scheduler fini
- fix ioctl return values
- fix user array stride
virtio:
- handle EDIDs better
panthor:
- irq safe fence lock fix
- reset work fix
- fix invalid pointer
- fix iomem access in suspended state
- sched resume fix
- unplug suspend fix
- drop needless check
- eviction leak fix
- bail on group start/resume fix
- keep irqs masked
malidp:
- use clock bulk API
komeda:
- clock prepare fixes"
* tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/xe/oa: Fix offset alignment for MERT WHITELIST_OA_MERT_MMIO_TRG
drm/xe/pt: prevent invalid cursor access for purged BOs
drm/xe: fix NPD in bo_meminfo()
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
drm/xe/hw_engine: Fix double-free of managed BO in error path
drm/xe/userptr: Drop bogus static from finish in force_invalidate
drm/xe/userptr: Hold notifier_lock for write on inject test path
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
drm/xe: Return error on non-migratable faults requiring devmem
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
drm/xe/rtp: Toggle 'deny' bit to (de-)whitelist OA regs
drm/xe/rtp: Save OA nonpriv registers to register save/restore lists
drm/xe/rtp: Generalize whitelist_apply_to_hwe
drm/xe/rtp: Keep track of non-OA nonpriv slots
drm/xe/rtp: Maintain OA whitelists separately
drm/xe/rtp: Fix build error with clang < 21 and non-const initializers
drm/imagination: Fix user array stride in pvr_set_uobj_array()
drm/imagination: Fix returned size for DRM_IOCTL_PVR_DEV_QUERY
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI TAD (Time and Alarm
Device) driver introduced by one of its previous updates and
get rid of the ugly #ifdef __KERNEL__ conditional compilation
in acpi_ut_safe_strncpy() by redefining that function as an
alias for strscpy_pad():
- Add a missing ACPI_TAD_AC_WAKE capability check omitted by mistake
to the ACPI TAD driver (Xu Rao)
- Define acpi_ut_safe_strncpy() as an alias for strscpy_pad()
which is viable because that function is only called from kernel
code (Rafael Wysocki)"
* tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Define acpi_ut_safe_strncpy() as strscpy_pad() alias
ACPI: TAD: Check AC wake capability before enabling wakeup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a crash when a kretprobe reads from the stack
- Fix an issue with the build-time mcount sorter that broke ftrace
- Fix the rv32 IRQ stack frame padding to match the ABI
- Only defer IOMMU configuration during initialization. This avoids an
issue where IOMMU configuration could be indefinitely deferred
- Add the missing build salt to the vDSO
- Now that RISC-V systems with higher numbers of cores are starting to
become available, raise NR_CPUS for RISC-V to 256
- Clean up some warnings from sparse caused by the RISC-V-optimized
RAID6 code
- Clean up our __cpu_up() code with a few minor fixes
* tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: probes: save original sp in rethook trampoline
riscv: Fix 32-bit call_on_irq_stack() frame pointer ABI
scripts/sorttable: Handle RISC-V patchable ftrace entries
riscv: smp: use secs_to_jiffies in __cpu_up
ACPI: RIMT: Only defer the IOMMU configuration in init stage
riscv: Add build salt to the vDSO
raid6: fix raid6_recov_rvv symbol undeclared warning
raid6: fix riscv symbol undeclared warnigns
riscv: Raise default NR_CPUS for 64BIT to 256
|
|
Once ads1015_probe() gets past ads1015_set_conv_mode(CONTINUOUS), two
resources leak on its error paths and on driver unbind:
- pm_runtime_enable() is left enabled if iio_device_register() fails;
on subsequent probe/rebind the runtime PM tracking complains about
an unbalanced enable.
- The CONTINUOUS conversion mode written to the chip is never restored
on any error path after that point, so on probe failure the chip is
left running.
Convert all three teardown operations of ads1015_remove() to devm so
that the error paths and the unbind path share the same unwind in
reverse-of-setup order:
- ads1015_set_conv_mode(SINGLESHOT) becomes a devm action registered
immediately after CONTINUOUS mode is enabled.
- pm_runtime_enable() becomes devm_pm_runtime_enable().
- iio_device_register() becomes devm_iio_device_register(), so the
iio device is unregistered first on unbind.
ads1015_remove() is no longer needed and is dropped.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
bm1390_trigger_handler() returns from three error paths without calling
iio_trigger_notify_done(). The success path at the end does, so on a
transient regmap or read failure the trigger's use_count is never
decremented and iio_trigger_poll_chained() drops subsequent dispatches
until the trigger is reattached.
This is not a fix for a reported bug, only hardening against hardware
or bus glitches; if a glitch is persistent the device is wedged and
needs an unbind anyway, which is left to the user.
Split the function so the inner helper returns bool with the data-read
outcome, and the outer IRQ handler calls iio_trigger_notify_done()
once and reports the result via IRQ_RETVAL().
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
drm_gpuva_find_{prev|next}() have no consumers.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260608-gpuvm-minor-fixes-v2-1-af07ef9ca969@collabora.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The rust-analyzer generator script recognizes a crate when its
corresponding `.o` appears in the Rust source file's immediate `Makefile`
or `Kbuild` file.
Commit ca524e273c43 ("gpu: build nova-core and nova-drm from
drivers/gpu/Makefile") moves the build rules for `nova-core` and
`nova-drm` into `drivers/gpu/Makefile`, which results in the generator
script ignoring these crates.
Fix this by naming the crates' module as a comment in their respective
`Makefile`; this is enough for the script to pick them up and restore
`rust-analyzer` functionality on them.
Fixes: ca524e273c43 ("gpu: build nova-core and nova-drm from drivers/gpu/Makefile")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Link: https://patch.msgid.link/20260701-nova-rust-analyzer-v1-1-5209f486f10d@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
While touching these arrays drop a comma after a list terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/b515eb1644e793d019163fd2a717d3fccef857f5.1781689255.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
spi_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled array, only its representation
in source form benefits.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/3fc7783506cc6429b8942cb7294926a6d4cb353e.1781885606.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Remove nested blocks in isa_bus_init(). This will make the module
easy-to-understand and make the code clearer.
Previous discussion regarding this change can be found
at below link:
https://lore.kernel.org/all/20260504063518.515620-1-wbg@kernel.org/
Acked-by: William Breathitt Gray <wbg@kernel.org>
Suggested-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/20260504063518.515620-1-wbg@kernel.org/
Link: https://patch.msgid.link/20260701205857.GA4113@syednwaris
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Refactor the trigger handler to avoid use of goto in a guard() scope.
Ideally, we should not be mixing goto and automatic cleanup.
iio_trigger_notify_done() was not part of the critical section anyway,
so is not moved to the new function.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Stepan Ionichev <sozdayvek@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The old email has been inactive for a while. Replace all occurrences
with the current address.
While at it, add myself to MAINTAINERS file as relevant driver files
still hold my address.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The old email has been inactive for a while. Replace all occurrences
with the current address.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This simplifies error handling and ensures consistent error reporting.
Signed-off-by: Prashant Rahul <prashantrahul23@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
As part of driver initialization, e.g. st_lsm6dsx_init_shub() selects
the shub register page using st_lsm6dsx_set_page(). Selecting the shub
register page shadows the regular register space so whoami, among other
registers, is no longer accessible.
In applications where the IMU is permanently powered separately from the
processor, there is a window where a reset of the CPU leaves the IMU in
the shub register page. Once this occurs, any subsequent probe attempt
fails because of the register shadowing.
Using the ism330dlc, the error typically looks like
st_lsm6dsx_i2c 3-006a: unsupported whoami [10]
with the unknown whoami read from a reserved register in the shub page.
The reset register is also shadowed by the page select, preventing a
reset from recovering the chip.
Unconditionally clear the shub page before the whoami readout to ensure
normal register access and allow the initialization to proceed.
Place the fix in st_lsm6dsx_check_whoami() before the whoami check
because hw->settings, which st_lsm6dsx_set_page() relies on, is first
assigned in that function.
Placing the fix in a more logical place than the whoami check would
require a bigger restructuring of the code.
Fixes: c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Andreas Kempe <andreas.kempe@actia.se>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Merge an ACPI TAD (Time and Alarm Device) driver fix for 7.2-rc2.
* acpi-tad:
ACPI: TAD: Check AC wake capability before enabling wakeup
|
|
xe_pci.c includes <kunit/test-bug.h> twice, separated only by the
<kunit/test.h> include. Drop the redundant second include; this is a
non-functional cleanup flagged by scripts/checkincludes.pl.
Fixes: 6cad22853cb8 ("drm/xe/kunit: Add stub to read_gmdid")
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Link: https://patch.msgid.link/20260702112820.34675-1-anxkhn28@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Before arming a user job, xe_exec_ioctl() only added the VM's
dma-resv KERNEL slot as a dependency. That slot covers rebinds and
the kernel operations of the VM's private BOs, but not external BOs
(bo->vm == NULL), which carry their kernel operations (evictions,
moves, ...) in their own dma-resv KERNEL slot.
The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for
memory management operations that must complete before the BO or its
backing store may be used: any accessor is required to wait on the
KERNEL fences before touching the resv. By skipping the external BOs'
KERNEL slots, the exec path violated that contract and could schedule
a user job while a kernel operation on an external BO mapped by the VM
was still in flight, racing against it and potentially reading or
writing memory that was being moved.
Replace the VM-only dependency with an iteration over every object
locked by the exec, adding each object's KERNEL slot as a job
dependency. This covers the VM resv (rebinds and private BOs) as well
as every external BO, mirroring the drm_gpuvm_resv_add_fence() call
that later publishes the job fence to the same set of objects.
Long-running mode continues to skip this, as before.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Assisted-by: GitHub_Copilot:claude-opus-4.8
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260702215805.4011228-1-matthew.brost@intel.com
|
|
Replace hardcoded fixed usleep_range() delays during clock recovery and
channel equalization with drm_dp_link_train_clock_recovery_delay()
and drm_dp_link_train_channel_eq_delay() helpers.
The original fixed delays are only valid for the case where bit[6:0] of
DPCD TRAINING_AUX_RD_INTERVAL(0000Eh) is 0x00, while core helpers apply
spec-compliant timings matching actual receiver capability values.
Additionally, add dpcd buffer to struct analogix_dp_device to cache
receiver capabilities. Call drm_dp_read_dpcd_caps() at commit entry to
populate cached DPCD data for subsequent link training steps, and
prepare for further usage of other DP helper APIs.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260623075207.320603-1-damon.ding@rock-chips.com
|
|
mlx5e_channel_stats_alloc() publishes a new entry to
priv->channel_stats[] and then increments priv->stats_nch as a
publication token, but neither store carries any memory barrier:
priv->channel_stats[ix] = kvzalloc_node(...);
if (!priv->channel_stats[ix])
return -ENOMEM;
priv->stats_nch++;
Concurrent readers compute the loop bound from priv->stats_nch and
then dereference priv->channel_stats[i] using plain accesses, e.g.
for (i = 0; i < priv->stats_nch; i++) {
struct mlx5e_channel_stats *cs = priv->channel_stats[i];
... cs->rq.packets ...
}
On weakly-ordered architectures (ARM, PowerPC, RISC-V) the writes to
channel_stats[ix] and stats_nch may become visible to other CPUs out
of program order. A reader can observe stats_nch == N while still
seeing channel_stats[N-1] == NULL, leading to a NULL pointer
dereference in the channel_stats loop.
This has been observed in production on BlueField-3 DPUs (arm64),
where ovs-vswitchd queries netdev statistics over netlink during NIC
bringup, racing mlx5e_open_channel() -> mlx5e_channel_stats_alloc()
on another CPU:
Unable to handle kernel NULL pointer dereference at virtual address 0x840
Hardware name: BlueField-3 DPU
pc : mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
Call trace:
mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
dev_get_stats+0x50/0xc0
ovs_vport_get_stats+0x38/0xac [openvswitch]
ovs_vport_cmd_fill_info+0x194/0x290 [openvswitch]
ovs_vport_cmd_get+0xbc/0x10c [openvswitch]
genl_family_rcv_msg_doit+0xd0/0x160
genl_rcv_msg+0xec/0x1f0
netlink_rcv_skb+0x64/0x130
genl_rcv+0x40/0x60
netlink_unicast+0x2fc/0x370
netlink_sendmsg+0x1dc/0x454
...
__arm64_sys_sendmsg+0x2c/0x40
Add mlx5e_stats_nch_write() and mlx5e_stats_nch_read() helpers in en.h
that wrap the smp_store_release()/smp_load_acquire() pair on stats_nch.
The release/acquire pair establishes the contract:
stats_nch == N => channel_stats[0..N-1] are visible and non-NULL.
Publish the stats_nch increment via mlx5e_stats_nch_write() in the
writer (mlx5e_channel_stats_alloc()), and read stats_nch via
mlx5e_stats_nch_read() in all readers: mlx5e RX/TX queue stats,
mlx5e_get_base_stats(), ethtool channels stats, IPoIB stats, the
sw_stats fold and the HV VHCA stats agent.
Fixes: fa691d0c9c08 ("net/mlx5e: Allocate per-channel stats dynamically at first usage")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630115151.729219-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mlx5e_hv_vhca_stats_create() registers the stats agent through
mlx5_hv_vhca_agent_create(). The helper publishes the agent in
hv_vhca->agents[type] under agents_lock and immediately schedules an
asynchronous control invalidation on the HV VHCA workqueue before
returning to mlx5e.
The asynchronous invalidation invokes the control agent's invalidate
callback, which reads the hypervisor control block and forwards the
command to mlx5e_hv_vhca_stats_control(). That callback may either:
- call cancel_delayed_work_sync(&priv->stats_agent.work), or
- call queue_delayed_work(priv->wq, &sagent->work, sagent->delay).
However, the delayed_work and priv->stats_agent.agent are only
initialized after mlx5_hv_vhca_agent_create() returns to mlx5e:
agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */
...
priv->stats_agent.agent = agent; /* too late */
INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */
If the asynchronous control path runs before the two assignments
above, it can:
- Operate on an uninitialized delayed_work whose timer.function is
NULL. queue_delayed_work() calls add_timer() unconditionally, so
when the timer expires the timer softirq invokes a NULL function
pointer.
- Re-initialize the timer later through INIT_DELAYED_WORK() while
the timer is already enqueued in the timer wheel, corrupting the
hlist (entry.pprev cleared while the previous bucket node still
points at this entry).
- When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads
sagent->agent (NULL) and dereferences it inside
mlx5_hv_vhca_agent_write().
Fix this by:
- Initializing priv->stats_agent.work before invoking
mlx5_hv_vhca_agent_create(), so the work is always in a valid
state when the control callback observes it.
- Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter
to mlx5_hv_vhca_agent_create(). The helper writes the agent
pointer to *ctx_update before publishing into hv_vhca->agents[]
and triggering the agents_update flow, so any callback
subsequently invoked from that flow already sees a valid
priv->stats_agent.agent. This avoids having the control
callback participate in agent initialization.
While at it, access priv->stats_agent.agent with
READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and
clear priv->stats_agent.buf on the agent_create() failure path.
Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630115151.729219-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(),
before mlx5e_open(). At that point priv->stats_nch is still zero,
because it is only ever incremented in mlx5e_channel_stats_alloc(),
which is reached only from mlx5e_open_channel().
mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and
kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather
than NULL. The "if (!buf)" guard does not catch this, and
mlx5e_hv_vhca_stats_create() completes "successfully" with
priv->stats_agent.buf set to ZERO_SIZE_PTR.
Once channels are opened (priv->stats_nch > 0) and the hypervisor
enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes
buf_len using the new non-zero stats_nch and calls
memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10.
Allocate the buffer based on priv->max_nch, which is set in
mlx5e_priv_init() and is the upper bound on stats_nch:
- Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that
returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and
use it for the kvzalloc() in mlx5e_hv_vhca_stats_create().
- Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on
stats_nch) for the worker's active payload size, so the wire
format (block->rings = stats_nch) and the amount of data filled
by mlx5e_hv_vhca_fill_stats() are unchanged.
The max(max_nch, stats_nch) guard handles the rare case where
mlx5e_attach_netdev() recomputes max_nch downward across a
detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev
does not call mlx5e_priv_cleanup, so stats_nch is only reset when
the netdev is destroyed). Without the guard, the worker could compute
buf_len from stats_nch and overrun the smaller buffer allocated based
on the reduced max_nch.
Allocating a non-zero buffer also makes the kvzalloc() failure path in
mlx5e_hv_vhca_stats_create() reachable for the first time: it returns
early without (re)creating the agent. Clear
priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after
freeing them, so that if a later create() bails out on this path, a
subsequent teardown does not double-free the stale agent/buffer left
from a previous enable/disable cycle.
This mirrors the existing mlx5e pattern of preallocating arrays of
size max_nch (e.g. priv->channel_stats) and lazily populating
entries up to stats_nch on demand.
Fixes: fa691d0c9c08 ("net/mlx5e: Allocate per-channel stats dynamically at first usage")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630115151.729219-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
VS/PE values returned by drm_dp_get_adjust_request_voltage() and
drm_dp_get_adjust_request_pre_emphasis() are already encoded to their
native DPCD register bit positions. However, DPCD_VOLTAGE_SWING_SET /
DPCD_PRE_EMPHASIS_SET macros perform an extra internal shift. Feeding
the raw offset-bearing values directly leads to overlapping bitfields
and invalid lane training configuration, causing link training failures
and black screen.
Add right shift using DP_TRAIN_*_SHIFT constants to strip the DPCD bit
offsets before passing values to the SET macros and subsequent checks.
Apply this fix for both clock recovery and adjust training code paths.
Reported-by: Vicente Bergas <vicencb@gmail.com>
Closes: https://lore.kernel.org/all/CAAMcf8D-d+5n=H44KeKBSqWY42m+o32W+mO-r15VqWNyYhJL7Q@mail.gmail.com/
Fixes: d84b087c7662 ("drm/bridge: analogix_dp: Apply DP helper APIs to get adjusted voltages and pre-emphasises")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/all/CAAMcf8D-d+5n=H44KeKBSqWY42m+o32W+mO-r15VqWNyYhJL7Q@mail.gmail.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260623023506.309858-1-damon.ding@rock-chips.com
|
|
Add READ_ONCE()/WRITE_ONCE() annotations on fields that can be
changed concurrently in macsec_changelink() and macsec_update_offload():
- secy->key_len
- secy->xpn
- tx_sc->encoding_sa
- tx_sc->encrypt
- secy->protect_frames
- tx_sc->send_sci
- tx_sc->end_station
- tx_sc->scb
- secy->replay_protect
- secy->validate_frames
- secy->replay_window
- macsec->offload
This allows macsec_fill_info() to run locklessly without RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260701094341.3218199-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG
or when no device is marked as master. Result bad memory access and kernel
crash[1].
Hence, skip the peer when lookup fails.
Note: In case there are peer flows, they are cleaned before LAG cleared
the master mark.
[1]
RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core]
Call Trace:
<TASK>
mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core]
mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core]
mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core]
mlx5_devcom_send_event+0x7a/0x140 [mlx5_core]
mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core]
mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core]
mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core]
mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core]
mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core]
mlx5e_detach_netdev+0x96/0xf0 [mlx5_core]
mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core]
__esw_offloads_unload_rep+0x81/0xb0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core]
mlx5e_rep_remove+0x22/0x30 [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xe8/0x1b0
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core]
mlx5_unregister_device+0x54/0x80 [mlx5_core]
mlx5_uninit_one+0x73/0x130 [mlx5_core]
remove_one+0x78/0xe0 [mlx5_core]
pci_device_remove+0x39/0xa0
Fixes: 971b28accc09 ("net/mlx5: LAG, replace mlx5_get_dev_index with LAG sequence number")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630112917.698313-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mlx5_mpesw_work() returned without calling complete() when
mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the
work and waited on mpesww->comp would block indefinitely.
Funnel the early-return path through a new "complete" label so the
waiter is always woken.
Fixes: b430c1b4f63b ("net/mlx5: Replace global mlx5_intf_lock with HCA devcom component lock")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630112917.698313-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone.
Fixes: ddbb5ddc43ad ("net/mlx5: LAG, Refactor lag logic")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630112917.698313-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- rename function parameters and a comment related to
xen_exchange_memory() (Jan Beulich)
- replace __ASSEMBLY__ with __ASSEMBLER__ (Thomas Huth)
- add some sanity checking to the Xen pvcalls frontend driver (Michael
Bommarito)
- fix error handling in the Xen gntdev driver (Wentao Liang)
- fix several minor bugs in Xen related drivers (Yousef Alhouseen)
* tag 'for-linus-7.2a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: correct commentary and parameter naming of xen_exchange_memory()
xenbus: reject unterminated directory replies
xen/gntalloc: validate grant count before allocation
xen/gntalloc: make grant counters unsigned
xen/front-pgdir-shbuf: free grant reference head on errors
xen/gntdev: fix error handling in ioctl
xen: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files
xen/pvcalls: bound backend response req_id before indexing rsp[]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- check the return value of gpiochip_add_data() in gpio-mvebu and
gpio-htc-egpio
- avoid locking context issues with GPIO drivers using the shared GPIO
proxy by only allowing sleeping operations (atomic GPIO ops don't
really make sense in shared context anyway)
- with the above: restore non-sleeping GPIO access in pinctrl-meson
- fix return value on OOM in gpio-timberdale
- fix interrupt handling in gpio-mt7621
- support both A and B variants of NCT6126D in gpio-f7188x
* tag 'gpio-fixes-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
pinctrl: meson: restore non-sleeping GPIO access
gpio: timberdale: Return -ENOMEM on dynamic memory allocation in probe
gpio: mt7621: be sure IRQ domain is created before exposing GPIO chips
gpio: mt7621: more robust management of IRQ domain teardown
gpio: mt7621: avoid corruption of shared interrupt trigger state
gpio: shared-proxy: always serialize with a sleeping mutex
gpio-f7188x: Add support for NCT6126D version B
gpio: htc-egpio: use managed gpiochip registration
gpio: mvebu: fail probe if gpiochip registration fails
|
|
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
|
|
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260702130903.1790633-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add READ_ONCE()/WRITE_ONCE() annotations on vlan->mode, vlan->flags,
vlan->bc_queue_len_req and port->bc_cutoff.
Fill IFLA_MACVLAN_MACADDR_DATA nested attribute and compute
on the fly the precise number of elements we put in it,
to fill an accurate IFLA_MACVLAN_MACADDR_COUNT attribute
as some user space applications could depend on its value
and the attributes order.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701082214.2974946-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Both fields can be changed in macvlan_changelink() while being read
locklessly.
Add READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701082214.2974946-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RedBoot FIS partition names are stored in a fixed 16-byte field that is
expected to be NUL-terminated. parse_redboot_partitions() used strlen()
to size the names area and later copied the same field with strcpy(), so
a malformed table entry without a terminator could make both operations
read beyond the descriptor.
Validate each accepted FIS name with strnlen() before adding it to the
partition list.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The comment above makes it clear that this is a single element for
legacy handling. Clarify that with struct_size and avoid manual pointer
math.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The uclinux MTD map driver is still actively used on ColdFire (m68k)
platforms. The ColdFire startup code in arch/m68k/coldfire/head.S copies
an attached filesystem blob to _bss_stop, and the uclinux driver picks
it up from there. Most ColdFire defconfigs enable CONFIG_MTD_UCLINUX, as
the driver seems to serve as a replacement for CONFIG_BLK_DEV_INITRD on
these non-MMU targets.
The driver was removed as part of a series cleaning up AMD Élan specific
drivers, but unlike the other three drivers in that series, this driver
seemed to not be as Élan specific (nor unused) as initially thought.
This reverts commit c584b8a7ad01a334a89732f3c5791ba14e58642b.
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Closes: https://lore.kernel.org/all/b55ac37f-4523-46d0-8e77-3a17d7235ffe@westnet.com.au/
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The S5PC110 OneNAND DMA helpers have bounded waits for transfer
completion. The polling helper falls out of its timeout loop and returns
success, and the IRQ helper ignores wait_for_completion_timeout().
Return -ETIMEDOUT when the DMA transfer-done bit or completion does not
arrive before the timeout so callers can treat the buffer transfer as
failed.
Fixes: e23abf4b7743 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
