| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
IOMMU_TEST_OP_DIRTY sizes its temporary dirty bitmap from length /
page_size. Very large selftest ranges can make the DIV_ROUND_UP()
additions wrap before allocation, producing a zero-length allocation while
the later test_bit() loop still walks the original number of bits.
The selftest helper does not need to support unbounded dirty bitmap sizes.
Reject requests that would allocate more than SZ_16M for the temporary
buffer.
Fixes: 79ea4a496ab5 ("iommufd/selftest: Fix buffer read overrrun in the dirty test")
Link: https://patch.msgid.link/r/20260628152331.82122.408afd7b466c.iommufd-test-dirty-bitmap-size-wrap@trailofbits.com
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Renesas RZ/G3S SoC has a CAN-FD IP. Add clocks and resets for it.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260709182332.876408-2-claudiu.beznea+renesas@tuxon.dev
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
init_one() defers handling errors from hfi1_init() and
hfi1_register_ib_device() to a combined block. This allows IB registration
to run after device initialization has failed. Cleanup then depends on two
unrelated error values.
The late probe failure path also differs from the common teardown in
remove_one(), even though both release the same initialized hardware and
driver resources. Maintaining separate sequences obscures ownership and
allows the paths to drift whenever initialization changes.
Unwind at each failing stage and keep late probe teardown ordered like
remove_one(), so partial initialization releases exactly the resources it
owns and normal removal remains the reference cleanup flow.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-13-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Commit ed6f653fe430 ("staging/rdma/hfi1: Fix debugfs access race") moved
debugfs creation after device initialization and IB registration so users
cannot access the files before the driver is ready. However, init_one()
still creates them before character device creation and SDMA startup
finish.
Move hfi1_dbg_ibdev_init() to the end of the successful probe path,
matching hfi1_dbg_ibdev_exit() as the first action in remove_one().
Fixes: ed6f653fe430 ("staging/rdma/hfi1: Fix debugfs access race")
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-12-b9e9641268a5@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
init_one() creates the character device before checking whether generic or
IB initialization failed, only to remove it immediately while unwinding.
Moreover, user_add() already calls user_remove() when device creation
fails.
Move hfi1_device_create() after the initialization failure path,
immediately before starting SDMA. The failure path then has no character
device to remove, and hfi1_device_create() continues to unwind its own
failures.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-11-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
hfi1 does not queue work on ib_wq. QSFP and link work run on the per-port
link_wq, while the remaining device work uses hfi1_wq or dedicated queues.
The probe failure path destroys both per-port workqueues, and normal device
removal flushes them in shutdown_device() before destroying them.
Remove the flushes of the core-owned global workqueue. Waiting for
unrelated core or other device work is not part of hfi1 teardown.
Fixes: 71d47008ca1b ("IB/hfi1: Create workqueue for link events")
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-10-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
create_workqueues() is called only from init_one(), immediately after
hfi1_alloc_devdata() returns a zero-initialized hfi1_devdata. As a
result, the per-port hfi1_wq and link_wq pointers are always NULL on
entry, and nothing modifies them between allocation and this call.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-9-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
After the preceding changes, module parameter validation and common PCI
setup no longer need hfi1_devdata. init_one() nevertheless allocates it
first, so failures in those early steps return without releasing it.
Move the allocation after hfi1_pcie_init() and return directly when no
resources are held. Use dev_err() and pci_info() for diagnostics emitted
before allocation so they retain the adapter BDF. Once PCI setup succeeds,
unwind allocation failures through hfi1_pcie_cleanup() to disable the
device and release its regions.
Some PCI error delivery paths are not serialized against probe. Keep their
diagnostics based on pci_dev and skip resume while driver data is absent,
preventing recovery from dereferencing a missing hfi1_devdata.
Fixes: 57f97e96625f ("IB/hfi1: Get the hfi1_devdata structure as early as possible")
Reported-by: Dawei Feng <dawei.feng@seu.edu.cn>
Closes: https://lore.kernel.org/all/20260627060159.2543686-1-dawei.feng@seu.edu.cn/
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-8-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal.
Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev")
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-7-b9e9641268a5@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
create_workqueues() only needs fields set up by hfi1_alloc_devdata().
Call it before hfi1_init_dd() so a workqueue allocation failure happens
before chip resources are initialized.
To keep the reordered error paths safe, make init_one() own hfi1_devdata.
hfi1_init_dd() unwinds its partial setup but leaves the allocation for the
caller to free. If device initialization fails, destroy the workqueues
before freeing the device data.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-6-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
hfi1_validate_rcvhdrcnt() only needs hfi1_devdata to identify the adapter
in error messages. Requiring the full device data prevents module parameter
validation from running before hfi1_devdata is allocated.
Pass pci_dev instead and use dev_err(), allowing validation to move earlier
without losing the PCI BDF needed on multi-device systems. Use %u for the
unsigned count while changing the messages.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-5-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
hfi1_pcie_init() only needs hfi1_devdata to reach the PCI device. This
unnecessary dependency prevents common PCI setup from running before
hfi1_devdata is allocated.
Pass pci_dev directly and report failures with dev_err(), preserving the
device BDF needed to identify the failing adapter on multi-device systems.
Use %pe while changing the messages so errno values are decoded.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-4-b9e9641268a5@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The PCI core calls init_one() only after pci_match_device() has selected
an ID. For normal probing, hfi1_pci_tbl already restricts matches to the
two supported Intel device IDs. Dynamic IDs and driver_override are
explicit requests to attempt binding, so the probe should not second-guess
the PCI core's decision.
Remove the redundant check.
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-3-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
hfi1_free_devdata() assumes that the device was inserted into the unit
table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the
zero-initialized unit remains zero, so full cleanup can remove an
unrelated device from index 0.
Release only the rdmavt allocation and return immediately while the unit
table has not acquired the device.
Fixes: 03b92789e5cf ("hfi1: Convert hfi1_unit_table to XArray")
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-2-b9e9641268a5@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure.
Fixes: ff6acd69518e ("IB/rdmavt: Add device structure allocation")
Link: https://patch.msgid.link/20260708-clean-init-one-hfi1-v1-1-b9e9641268a5@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
fwnet_frag_new() keeps a sorted list of received fragments for a partial
datagram. When a new fragment is adjacent to an existing fragment, the
code checks whether the new fragment also closes the gap to the next or
previous list entry.
Those neighbor lookups currently assume that the current fragment always
has a real next or previous fragment. At a list edge, the next or
previous entry is the list head, not a struct fwnet_fragment_info.
The gap checks also compare against the old edge of the current fragment
instead of the edge after adding the new fragment. As a result, a
fragment that bridges two existing ranges may leave two adjacent ranges
unmerged, so fwnet_pd_is_complete() can miss a complete datagram.
Check for the list head before looking up the neighboring fragment, and
compare the neighbor against the new fragment's far edge when deciding
whether to merge all three ranges.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: c76acec6d551 ("firewire: add IPv4 support")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Link: https://lore.kernel.org/r/20260707150454.2265951-1-ruoyuw560@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Some Realtek USB SD readers with a tray keep raw SD_CD asserted
when an empty tray is inserted. The MMC core then repeatedly tries to
initialize non-existent media, sees command timeouts, calls ->get_cd()
again, and starts the same detect cycle over.
Do not qualify media by open-coding MMC commands in ->get_cd().
Instead, let the normal MMC rescan path probe the card. If an
initialization command times out before a card has been attached,
suppress the raw SD_CD signal so the host can settle and the USB
parent can autosuspend.
Clear the suppression only when raw SD_CD drops. On the affected tray
reader, changing media requires removing and reinserting the tray, so
a low CD transition is the signal that a new insertion attempt can be
trusted again.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The runtime autosuspend callback currently queries card status and
clears OCP by issuing USB register accesses. This can run from the
USB runtime-PM path itself, which is the wrong place to start more
device I/O.
Keep a cached copy of the card-status bits from normal status reads
instead. During runtime autosuspend, use that cached value only to
preserve the existing Memory Stick autosuspend deferral.
Do not treat raw SD_CD as an autosuspend blocker, because tray-based
SD readers can assert SD_CD with an empty tray. A real SD card is
protected by the SD/MMC child runtime-PM usage once powered.
Also stop clearing OCP from the runtime autosuspend callback, so the
callback does not issue USB commands.
Fixes: bb400d2120bd ("mfd: rtsx_usb: Defer autosuspend while card exists")
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Several SCMI notification data structures allocate a descriptor and then
allocate a fixed-size array referenced by that descriptor.
Use flexible array members for per-protocol registered events and
per-event source refcounts so each descriptor and its array can be
allocated together. Annotate the flexible arrays with __counted_by() and
assign the count fields immediately after allocation, before any array
access.
The registered_protocols table has a fixed SCMI_MAX_PROTO size, so embed
it directly in the notification instance instead of allocating it
separately.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260630204719.334211-1-rosenp@gmail.com
(sudeep.holla: Updated title and improved change description)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
On multi-socket platforms each socket has its own BPMP that is
registered with the kernel. For such platforms prefix the NUMA ID for
each socket to the BPMP powergate name to ensure there is a unique name
for each power-domain. Note that we only add the NUMA ID for powergates
that return a valid name because an invalid name indicates that the
powergate ID is not supported.
Note the check for the NULL string is moved into the function
tegra_bpmp_powergate_get_name(), because in the multi-socket case we
must only add the prefix if we receive a valid name. A NULL string
indicates that there is no valid powergate associated with the ID that
is being queried.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Commit 18605b1b936b ("pmdomain: bcm: bcm2835-power: Increase ASB control
timeout") raised the ASB handshake polling budget from 1us to 5us.
Surveying the pmdomain subsystem, 5us is still one of the smallest polling
budgets by a wide margin. Comparable handshakes in other drivers use:
- 100us : starfive jh71xx-pmu, apple pmgr-pwrstate
- 1ms : renesas rcar-sysc, rmobile-sysc (power-on)
- 10ms : renesas rcar-gen4-sysc, sunxi sun55i-pck600
- 1s : mediatek mtk-pm-domains, mtk-scpsys
Raise the BCM2835 timeout to 100us, matching analogous drivers. 100us is
still negligible relative to a power-domain transition and gives the V3D
master ASB substantially more headroom to drain under heavy workloads,
assuring us that the timeout is enough for any scenario.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add support for the power domains provided by the HFRPSYS Power
Controller of the MT8196 SoC.
Those control power to the eDP and DP Transmitter IPs.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Some new SoCs like MT8196, MT6991, and others, have got one
additional power controller (usually in the HFRP Multimedia
block) which needs a simplified power on/off sequence while
using Direct Control strategy.
Domains using the "simple power sequence" are not backed by
the RTFF hardware, have no Bus Protection mechanism, lacks
the ISO, PWR_ON, PWR_ON_2ND bits, and therefore get enabled
automatically after getting out of reset.
This simple power sequence is then a subset of the full one
as only needs the enablement of the specific power domain's
clock input and reset (where, again, after getting out of
reset, the ISO and PWR_ON bits are automatically internally
getting flipped) to enable or disable (power on or off).
Moreover, the simple power sequence power domains guarantee
that they always get enabled/disabled after executing the
relevant power sequence (on/off) so, differently from the
others, there is also no need to poll for a PWR_ACK.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
In case any probe error occurs (usually, a probe deferral) the
power domains shall be cleaned up while respecting their child
to parent relationship, or the system may freeze.
In order to do that without any memory footprint impacts after
the fact, allocate a temporary array in the probe function and
use it to store the indices of the added power domains in the
correct order.
This will be used in the error cleanup path and will be freed
at the end regardless of the probe status as, when the probing
succeeds, the genpd API takes care of unregistering all PDs in
the correct order anyway.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Should probe fail for HW_VOTER type power domains, this driver was
unconditionally trying to perform cleanup for DIRECT_CTL domains,
but only after checking if the target domain is powered on... with
the DIRECT_CTL scpsys_domain_is_on() code again.
And there's more: the scpsys_domain_is_on() function is also being
unconditionally used in the probe path, for any power domain that
has flag MTK_SCPD_KEEP_DEFAULT_OFF!
This bug was never experienced by anyone because the HWV domains
never failed probe, and because none of those is declared with the
aforementioned flag - but it's still something critical.
In order to fix this, add a check for MTCMOS Type and, based on
that, call the correct functions for an "is on" check, and also
do the same for the cleanup path, calling the correct functions
for the "power off" action.
For the latter, since there's a call to pm_genpd_remove() right
before calling power_off, be cautious and add a variation of the
power off functions (with a _internal suffix) for those to get a
pointer to scpsys_domain instead of one to generic_pm_domain as,
even if that's still working, this is way too much fragile and
would break at some point.
Fixes: 88914db077b6 ("pmdomain: mediatek: Add support for Hardware Voter power domains")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
* for-next/scmi/fixes:
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
firmware: arm_scmi: Grammar s/may needed/may be needed/
* for-next/ffa/fixes:
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Retention is very rarely an operational corner. In the majority of
cases, HW cannot operate properly at Retention levels and so the minimum
operational level when enabling a rail is the first corner above
Retention. A small subset of always-on use cases can operate at
Retention, but those aren't controlled from HLOS.
Currently, we allow Retention by default and only disallow it special
cases. But this leaves us open to various failures when the PD is
enabled without first being voted to an OPP above Retention. Such as
when a child GDSC PD requests to enable its parent RPMh PD. In this
case, the GDSC would get stuck powering on.
Newer chips have started supporting Retention on rails that didn't
previously (such as for MMCX). Instead of adding more special cases to
skip Retention on MMCX, start skipping Retention by default since it's
almost never desired from an HLOS perspective.
Signed-off-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
bcm2835_power_probe() initializes all power domains and then registers
the onecell genpd provider, but ignores of_genpd_add_provider_onecell()
failures. Probe can therefore return success even though no provider was
published.
Check the provider registration return value and jump to the existing
cleanup path on failure.
Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Fix grammar in the help text for the ARM_SCMI_POWER_DOMAIN symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260704122123.73004-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The Commubox FXA291 by Endress+Hauser AG is a USB serial converter
based on FT232B which is used to communicate with field devices.
It enumerates using the FTDI vendor ID and a custom PID.
usb 1-9: New USB device found, idVendor=0403, idProduct=e510, bcdDevice= 4.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: FXA291
usb 1-9: Manufacturer: Endress+Hauser
usb 1-9: SerialNumber: 00000000
ftdi_sio 1-9:1.0: FTDI USB Serial Device converter detected
usb 1-9: Detected FT232B
usb 1-9: FTDI USB Serial Device converter now attached to ttyUSB0
Signed-off-by: Tim Pambor <timpambor@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Killing the interrupt-in urb when the line disciple requests throttling
may lead to data loss if an ongoing transfer is cancelled.
Instead set a flag to prevent the completion handler from resubmitting
the urb until the port is unthrottled.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Forward from rc1 to rc3 to track upstream closer again.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The driver data usb-serial pointer is unused since commit 66c32e483355
("USB: serial: keyspan_pda: drop redundant usb-serial pointer"), which
apparently failed to remove the pointer as intended.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Three functions are initialising their return value variables at
declaration only to later assign them unconditionally.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
If the completion handler races with unthrottle() both functions may try
to resubmit the same interrupt-in urb, but at most one will succeed.
Fix the unthrottle logic using a throttle-requested flag so that only
one attempt to resubmit the urb is made to avoid logging an error.
Fixes: 43d186fe992d ("USB: serial: add metro-usb driver to the tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The unthrottle callback is allowed to sleep so pass the correct GFP flag
to usb_submit_urb() to avoid unnecessary atomic allocations.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The OOB port is not registered with driver core and does not have a
name.
Use the USB interface with dev_printk() that may involve the OOB port to
avoid log entries with no driver and a "null" device name.
Fixes: f9dfbebb8b39 ("USB: serial: digi_acceleport.c: remove dbg() usage")
Fixes: 194343d9364e ("USB: remove use of err() in drivers/usb/serial")
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The mlx4 CM paravirtualization layer rewrites a VF's local
communication ID to a PF-visible ID when CM MADs are sent from the VF.
For messages that start or advance a connection from the VF side, such
as REQ, REP, MRA and SIDR_REQ, mlx4_ib_multiplex_cm_handler() allocates
an id_map_entry when no existing mapping is found.
A REJ is different because it is a terminal response to an already known
exchange. It should either find an existing id_map_entry, rewrite the
local communication ID, and schedule that entry for deletion, or it
should pass through unchanged when no mapping exists.
Some REJ messages, such as rejects for an inbound REQ before an MRA or
REP was sent, do not have an id_map_entry because their local_comm_id is
zero. Timeout REJ messages are handled in the initial lookup branch, but
a lookup miss there must not fall through to id_map_alloc(); such a miss
means there is no existing mapping to translate or delete for the REJ.
Commit 227a0e142e37 ("IB/mlx4: Add support for REJ due to timeout")
added the timeout REJ case to the initial branch so an outgoing timeout
REJ could reuse the id_map_entry that was created when the VF's REQ was
multiplexed. Reusing that entry is the useful part: it rewrites the
timeout REJ local_comm_id to the same PF-visible ID that was sent in the
REQ. If the lookup misses, allocating a new id_map_entry does not help
because the peer has never seen that new PF-visible ID, and REJ is not
starting a new exchange.
Keep timeout REJ handling in the initial lookup branch, but return before
allocation if no mapping is found. Handle the other REJ cases with the
same lookup-only behavior. When a mapping is found, translate the local
communication ID and schedule delayed deletion, as is already done for
DREQ and for received REJ in the demux path. When no mapping is found,
keep the existing pass-through behavior.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Link: https://patch.msgid.link/20260615171759.557425-1-praveen.kannoju@oracle.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
diagnose_failure_lnl() read VPU_HW_BTRS_MTL_INTERRUPT_STAT instead of
VPU_HW_BTRS_LNL_INTERRUPT_STAT, which on LNL and newer parts is a
different register with a different bit layout, so failure diagnostics
decoded the wrong register and reported a bogus error cause.
Read the LNL interrupt status register instead.
Fixes: 8a27ad81f7d3 ("accel/ivpu: Split IP and buttress code")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260710101331.1899505-1-karol.wachowski@linux.intel.com
|
|
Clean up the inb command handling a bit by removing an unnecessary line
break and moving the assignment operator before breaking another long
expression.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Clean up the write completion handler by adding a temporary variable for
the transfer buffer and using the pre-existing urb pointer while
dropping some redundant casts.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the missing space around operators in transfer-buffer length
expressions to make the code more readable.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Drop the in-buf size define which has not been used since the port
buffers were removed by commit 5fea2a4dabdf ("USB: digi_acceleport
further buffer clean up").
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The driver submits the OOB read urb on first open of a port and does not
stop it until the device is disconnected.
Add an open counter and submit the urb on first open and stop it on last
close to avoid wasting resources (e.g. power) when the device is not in
use.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The urb context pointer does not change while an urb is in flight so
there is never a need to check for NULL on completion.
The port driver data is not freed until the port is unbound at which
point all I/O for that port has been stopped (and I/O is no longer
started for a port that has not yet been probed).
The device driver data is not freed until after the driver has been
unbound and at which point all I/O has also ceased.
Drop the redundant, overly defensive (and still incomplete) sanity
checks from the completion callbacks.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Clean up the driver by moving some declarations to approximate reverse
xmas style and removing some stray newlines (and adding a few for
readability).
While at it, also replace two spaces before tabs in the driver structs.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add a helper function for retrieving the OOB port to replace two
convoluted expressions.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Explicitly stop the write urb on close() also if the device is being
unbound instead of relying on core to do it after returning.
Note that the dp_write_urb_in_use flag is cleared by the completion
handler.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
