| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Correct "guarentees" to "guarantees" in the hotplug notes.
Signed-off-by: xiongweimin <xiongweimin@kylinos.cn>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the compatible for the MDSS client on the Snapdragon 8 Gen 1 so it can
be properly configured by the IOMMU driver.
Otherwise, there is an unhandled context fault, because the framebuffer is
already configured in UEFI.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some DRM drivers lacked the drm_panel.h include to use drm_panel_put()
after the commit b71a623598d3 ("drm/panel: of_drm_find_panel() return a counted reference").
Fixes: b71a623598d3 ("drm/panel: of_drm_find_panel() return a counted reference")
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722-panel-fix-kms-panel-put-v1-1-ebde56446ee5@linaro.org
|
|
Alice Mikityanska says:
====================
BIG TCP for UDP tunnels
This series is a follow-up to "BIG TCP without HBH in IPv6", and it adds
support for BIG TCP IPv4/IPv6 workloads in vxlan and geneve. Now that
IPv6 BIG TCP doesn't require stripping the HBH in all various
combinations in tunneled traffic, adding BIG TCP becomes feasible.
Patch 01 adds accessors for the length field in the UDP header, as
suggested by Paolo in review. The usage of udp_set_len is then added in
the following patches that start using length=0 in BIG TCP UDP packets.
Patches 02-04 close the gaps that prevent BIG TCP packets from going
through UDP tunnel code.
Patch 05 validates packets in udp_gro_receive to exclude packets with
length=0 from GRO aggregation.
Patch 06 is for proper formatting in tcpdump (set UDP len to 0 rather
than a trimmed value on overflow).
Patches 07-08 bump up tso_max_size for VXLAN and GENEVE.
Patch 09 adds selftests.
====================$
Link: https://patch.msgid.link/20260710134242.216538-1-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
From: Daniel Borkmann <daniel@iogearbox.net>
In Cilium we do support BIG TCP, but so far the latter has only been
enabled for direct routing use-cases. A lot of users rely on Cilium
with vxlan/geneve tunneling though. The underlying kernel infra for
tunneling has not been supporting BIG TCP up to this point.
Given we do now, bump tso_max_size for geneve netdevs up to GSO_MAX_SIZE
to allow the admin to use BIG TCP with geneve tunnels.
BIG TCP on geneve disabled:
Standard MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 30.00 37391.34
8k MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
262144 32768 32768 60.00 58030.19
BIG TCP on geneve enabled:
Standard MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 30.00 40891.57
8k MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
262144 32768 32768 60.00 61458.39
Example receive side:
swapper 0 [008] 3682.509996: net:netif_receive_skb: dev=geneve0 skbaddr=0xffff8f3b0a781800 len=129492
ffffffff8cfe3aaa __netif_receive_skb_core.constprop.0+0x6ca ([kernel.kallsyms])
ffffffff8cfe3aaa __netif_receive_skb_core.constprop.0+0x6ca ([kernel.kallsyms])
ffffffff8cfe47dd __netif_receive_skb_list_core+0xed ([kernel.kallsyms])
ffffffff8cfe4e52 netif_receive_skb_list_internal+0x1d2 ([kernel.kallsyms])
ffffffff8cfe573c napi_complete_done+0x7c ([kernel.kallsyms])
ffffffff8d046c23 gro_cell_poll+0x83 ([kernel.kallsyms])
ffffffff8cfe586d __napi_poll+0x2d ([kernel.kallsyms])
ffffffff8cfe5f8d net_rx_action+0x20d ([kernel.kallsyms])
ffffffff8c35d252 handle_softirqs+0xe2 ([kernel.kallsyms])
ffffffff8c35d556 __irq_exit_rcu+0xd6 ([kernel.kallsyms])
ffffffff8c35d81e irq_exit_rcu+0xe ([kernel.kallsyms])
ffffffff8d2602b8 common_interrupt+0x98 ([kernel.kallsyms])
ffffffff8c000da7 asm_common_interrupt+0x27 ([kernel.kallsyms])
ffffffff8d2645c5 cpuidle_enter_state+0xd5 ([kernel.kallsyms])
ffffffff8cf6358e cpuidle_enter+0x2e ([kernel.kallsyms])
ffffffff8c3ba932 call_cpuidle+0x22 ([kernel.kallsyms])
ffffffff8c3bfb5e do_idle+0x1ce ([kernel.kallsyms])
ffffffff8c3bfd79 cpu_startup_entry+0x29 ([kernel.kallsyms])
ffffffff8c30a6c2 start_secondary+0x112 ([kernel.kallsyms])
ffffffff8c2c142d common_startup_64+0x13e ([kernel.kallsyms])
Example transmit side:
swapper 0 [002] 3403.688687: net:net_dev_xmit: dev=enp10s0f0np0 skbaddr=0xffff8af31d104ae8 len=129556 rc=0
ffffffffa75e19c3 dev_hard_start_xmit+0x173 ([kernel.kallsyms])
ffffffffa75e19c3 dev_hard_start_xmit+0x173 ([kernel.kallsyms])
ffffffffa7653823 sch_direct_xmit+0x143 ([kernel.kallsyms])
ffffffffa75e2780 __dev_queue_xmit+0xc70 ([kernel.kallsyms])
ffffffffa76a1205 ip_finish_output2+0x265 ([kernel.kallsyms])
ffffffffa76a1577 __ip_finish_output+0x87 ([kernel.kallsyms])
ffffffffa76a165b ip_finish_output+0x2b ([kernel.kallsyms])
ffffffffa76a179e ip_output+0x5e ([kernel.kallsyms])
ffffffffa76a19d5 ip_local_out+0x35 ([kernel.kallsyms])
ffffffffa770d0e5 iptunnel_xmit+0x185 ([kernel.kallsyms])
ffffffffc179634e nf_nat_used_tuple_new.cold+0x1129 ([kernel.kallsyms])
ffffffffc179d3e0 geneve_xmit+0x920 ([kernel.kallsyms])
ffffffffa75e18af dev_hard_start_xmit+0x5f ([kernel.kallsyms])
ffffffffa75e1d3f __dev_queue_xmit+0x22f ([kernel.kallsyms])
ffffffffa76a1205 ip_finish_output2+0x265 ([kernel.kallsyms])
ffffffffa76a1577 __ip_finish_output+0x87 ([kernel.kallsyms])
ffffffffa76a165b ip_finish_output+0x2b ([kernel.kallsyms])
ffffffffa76a179e ip_output+0x5e ([kernel.kallsyms])
ffffffffa76a1de2 __ip_queue_xmit+0x1b2 ([kernel.kallsyms])
ffffffffa76a2135 ip_queue_xmit+0x15 ([kernel.kallsyms])
ffffffffa76c70a2 __tcp_transmit_skb+0x522 ([kernel.kallsyms])
ffffffffa76c931a tcp_write_xmit+0x65a ([kernel.kallsyms])
ffffffffa76ca3b9 __tcp_push_pending_frames+0x39 ([kernel.kallsyms])
ffffffffa76c1fb6 tcp_rcv_established+0x276 ([kernel.kallsyms])
ffffffffa76d3957 tcp_v4_do_rcv+0x157 ([kernel.kallsyms])
ffffffffa76d6053 tcp_v4_rcv+0x1243 ([kernel.kallsyms])
ffffffffa769b8ea ip_protocol_deliver_rcu+0x2a ([kernel.kallsyms])
ffffffffa769bab7 ip_local_deliver_finish+0x77 ([kernel.kallsyms])
ffffffffa769bb4d ip_local_deliver+0x6d ([kernel.kallsyms])
ffffffffa769abe7 ip_sublist_rcv_finish+0x37 ([kernel.kallsyms])
ffffffffa769b713 ip_sublist_rcv+0x173 ([kernel.kallsyms])
ffffffffa769bde2 ip_list_rcv+0x102 ([kernel.kallsyms])
ffffffffa75e4868 __netif_receive_skb_list_core+0x178 ([kernel.kallsyms])
ffffffffa75e4e52 netif_receive_skb_list_internal+0x1d2 ([kernel.kallsyms])
ffffffffa75e573c napi_complete_done+0x7c ([kernel.kallsyms])
ffffffffa7646c23 gro_cell_poll+0x83 ([kernel.kallsyms])
ffffffffa75e586d __napi_poll+0x2d ([kernel.kallsyms])
ffffffffa75e5f8d net_rx_action+0x20d ([kernel.kallsyms])
ffffffffa695d252 handle_softirqs+0xe2 ([kernel.kallsyms])
ffffffffa695d556 __irq_exit_rcu+0xd6 ([kernel.kallsyms])
ffffffffa695d81e irq_exit_rcu+0xe ([kernel.kallsyms])
ffffffffa78602b8 common_interrupt+0x98 ([kernel.kallsyms])
ffffffffa6600da7 asm_common_interrupt+0x27 ([kernel.kallsyms])
ffffffffa78645c5 cpuidle_enter_state+0xd5 ([kernel.kallsyms])
ffffffffa756358e cpuidle_enter+0x2e ([kernel.kallsyms])
ffffffffa69ba932 call_cpuidle+0x22 ([kernel.kallsyms])
ffffffffa69bfb5e do_idle+0x1ce ([kernel.kallsyms])
ffffffffa69bfd79 cpu_startup_entry+0x29 ([kernel.kallsyms])
ffffffffa690a6c2 start_secondary+0x112 ([kernel.kallsyms])
ffffffffa68c142d common_startup_64+0x13e ([kernel.kallsyms])
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Alice Mikityanska <alice@isovalent.com>
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260710134242.216538-9-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In Cilium we do support BIG TCP, but so far the latter has only been
enabled for direct routing use-cases. A lot of users rely on Cilium
with vxlan/geneve tunneling though. The underlying kernel infra for
tunneling has not been supporting BIG TCP up to this point.
Given we do now, bump tso_max_size for vxlan netdevs up to GSO_MAX_SIZE
to allow the admin to use BIG TCP with vxlan tunnels.
BIG TCP on vxlan disabled:
Standard MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 30.00 34440.00
8k MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
262144 32768 32768 30.00 55684.26
BIG TCP on vxlan enabled:
Standard MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 30.00 39564.78
8k MTU:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
262144 32768 32768 30.00 61466.47
When tunnel offloads are not enabled/exposed and we fully need to rely on
SW-based segmentation on transmit (e.g. in case of Azure) then the more
aggressive batching also has a visible effect. Below example was on the
same setup as with above benchmarks but with HW support disabled:
# ethtool -k enp10s0f0np0 | grep udp
tx-udp_tnl-segmentation: off
tx-udp_tnl-csum-segmentation: off
tx-udp-segmentation: off
rx-udp_tunnel-port-offload: off
rx-udp-gro-forwarding: off
Before:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 60.00 21820.82
After:
# netperf -H 10.1.0.2 -t TCP_STREAM -l60
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.1.0.2 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 60.00 29390.78
Example receive side:
swapper 0 [002] 4712.645070: net:netif_receive_skb: dev=enp10s0f0np0 skbaddr=0xffff8f3b086e0200 len=129542
ffffffff8cfe3aaa __netif_receive_skb_core.constprop.0+0x6ca ([kernel.kallsyms])
ffffffff8cfe3aaa __netif_receive_skb_core.constprop.0+0x6ca ([kernel.kallsyms])
ffffffff8cfe47dd __netif_receive_skb_list_core+0xed ([kernel.kallsyms])
ffffffff8cfe4e52 netif_receive_skb_list_internal+0x1d2 ([kernel.kallsyms])
ffffffff8d0210d8 gro_complete.constprop.0+0x108 ([kernel.kallsyms])
ffffffff8d021724 dev_gro_receive+0x4e4 ([kernel.kallsyms])
ffffffff8d021a99 gro_receive_skb+0x89 ([kernel.kallsyms])
ffffffffc06edb71 mlx5e_handle_rx_cqe_mpwrq+0x131 ([kernel.kallsyms])
ffffffffc06ee38a mlx5e_poll_rx_cq+0x9a ([kernel.kallsyms])
ffffffffc06ef2c7 mlx5e_napi_poll+0x107 ([kernel.kallsyms])
ffffffff8cfe586d __napi_poll+0x2d ([kernel.kallsyms])
ffffffff8cfe5f8d net_rx_action+0x20d ([kernel.kallsyms])
ffffffff8c35d252 handle_softirqs+0xe2 ([kernel.kallsyms])
ffffffff8c35d556 __irq_exit_rcu+0xd6 ([kernel.kallsyms])
ffffffff8c35d81e irq_exit_rcu+0xe ([kernel.kallsyms])
ffffffff8d2602b8 common_interrupt+0x98 ([kernel.kallsyms])
ffffffff8c000da7 asm_common_interrupt+0x27 ([kernel.kallsyms])
ffffffff8d2645c5 cpuidle_enter_state+0xd5 ([kernel.kallsyms])
ffffffff8cf6358e cpuidle_enter+0x2e ([kernel.kallsyms])
ffffffff8c3ba932 call_cpuidle+0x22 ([kernel.kallsyms])
ffffffff8c3bfb5e do_idle+0x1ce ([kernel.kallsyms])
ffffffff8c3bfd79 cpu_startup_entry+0x29 ([kernel.kallsyms])
ffffffff8c30a6c2 start_secondary+0x112 ([kernel.kallsyms])
ffffffff8c2c142d common_startup_64+0x13e ([kernel.kallsyms])
Example transmit side:
swapper 0 [005] 4768.021375: net:net_dev_xmit: dev=enp10s0f0np0 skbaddr=0xffff8af32ebe1200 len=129556 rc=0
ffffffffa75e19c3 dev_hard_start_xmit+0x173 ([kernel.kallsyms])
ffffffffa75e19c3 dev_hard_start_xmit+0x173 ([kernel.kallsyms])
ffffffffa7653823 sch_direct_xmit+0x143 ([kernel.kallsyms])
ffffffffa75e2780 __dev_queue_xmit+0xc70 ([kernel.kallsyms])
ffffffffa76a1205 ip_finish_output2+0x265 ([kernel.kallsyms])
ffffffffa76a1577 __ip_finish_output+0x87 ([kernel.kallsyms])
ffffffffa76a165b ip_finish_output+0x2b ([kernel.kallsyms])
ffffffffa76a179e ip_output+0x5e ([kernel.kallsyms])
ffffffffa76a19d5 ip_local_out+0x35 ([kernel.kallsyms])
ffffffffa770d0e5 iptunnel_xmit+0x185 ([kernel.kallsyms])
ffffffffc179634e nf_nat_used_tuple_new.cold+0x1129 ([kernel.kallsyms])
ffffffffc17a7301 vxlan_xmit_one+0xc21 ([kernel.kallsyms])
ffffffffc17a80a2 vxlan_xmit+0x4a2 ([kernel.kallsyms])
ffffffffa75e18af dev_hard_start_xmit+0x5f ([kernel.kallsyms])
ffffffffa75e1d3f __dev_queue_xmit+0x22f ([kernel.kallsyms])
ffffffffa76a1205 ip_finish_output2+0x265 ([kernel.kallsyms])
ffffffffa76a1577 __ip_finish_output+0x87 ([kernel.kallsyms])
ffffffffa76a165b ip_finish_output+0x2b ([kernel.kallsyms])
ffffffffa76a179e ip_output+0x5e ([kernel.kallsyms])
ffffffffa76a1de2 __ip_queue_xmit+0x1b2 ([kernel.kallsyms])
ffffffffa76a2135 ip_queue_xmit+0x15 ([kernel.kallsyms])
ffffffffa76c70a2 __tcp_transmit_skb+0x522 ([kernel.kallsyms])
ffffffffa76c931a tcp_write_xmit+0x65a ([kernel.kallsyms])
ffffffffa76cb42e tcp_tsq_write+0x5e ([kernel.kallsyms])
ffffffffa76cb7ef tcp_tasklet_func+0x10f ([kernel.kallsyms])
ffffffffa695d9f7 tasklet_action_common+0x107 ([kernel.kallsyms])
ffffffffa695db99 tasklet_action+0x29 ([kernel.kallsyms])
ffffffffa695d252 handle_softirqs+0xe2 ([kernel.kallsyms])
ffffffffa695d556 __irq_exit_rcu+0xd6 ([kernel.kallsyms])
ffffffffa695d81e irq_exit_rcu+0xe ([kernel.kallsyms])
ffffffffa78602b8 common_interrupt+0x98 ([kernel.kallsyms])
ffffffffa6600da7 asm_common_interrupt+0x27 ([kernel.kallsyms])
ffffffffa78645c5 cpuidle_enter_state+0xd5 ([kernel.kallsyms])
ffffffffa756358e cpuidle_enter+0x2e ([kernel.kallsyms])
ffffffffa69ba932 call_cpuidle+0x22 ([kernel.kallsyms])
ffffffffa69bfb5e do_idle+0x1ce ([kernel.kallsyms])
ffffffffa69bfd79 cpu_startup_entry+0x29 ([kernel.kallsyms])
ffffffffa690a6c2 start_secondary+0x112 ([kernel.kallsyms])
ffffffffa68c142d common_startup_64+0x13e ([kernel.kallsyms])
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260710134242.216538-8-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since BIG TCP for UDP tunnels will start using len=0 in the UDP header
as an indicator of a GSO packet bigger than 65535 bytes, this commit
introduces the following getter and setters to use tree-wide, in order
to explicitly mark places where len=0 may be expected, and handle them
properly:
1. udp_set_len() sets uh->len to its real value if it's not bigger than
65535, and to 0 otherwise: to be used in GSO context with aggregated
packets.
2. udp_set_len_short() is to be used when the length is known to fit 16
bits. It WARNs when the caller tries to assign a bigger value if
CONFIG_DEBUG_NET=y.
3. udp_get_len_short() returns len in host byte order: to be used on the
RX side to deal with non-aggregated packets, or to access the raw value
of the len field.
4. udp_get_len() decodes uh->len set by udp_set_len(). It checks whether
the packet is GSO to guard from malformed packets.
At the moment udp_set_len() is not used, a following commit will start
using it after enabling len>65535 for GSO.
Raw uh->len (in network byte order) is still accessed in a few places
for checksum calculation purposes, and to decode len=0 in udpv6_rcv for
jumbograms. udp_rcv and udpv6_rcv will be addressed by the commit that
starts using udp_set_len() to set UDP len=0 for BIG TCP packets in UDP
tunnels.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260710134242.216538-2-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 922fb2db0287 ("dt-bindings: display: simple: Add Kyocera
tcg070wvlq panel") added the compatible string for the Kyocera
tcg070wvlq panel to the devicetree bindings documentation
(panel-simple.yaml), but the corresponding entry was not added
to the panel-simple driver.
Add the missing compatible entry to the driver.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260721041935.757240-1-hs@nabladev.com
|
|
Migrate osd101t2587-53ts panel driver from deprecated mipi_dsi*
functions to their *_multi variants for improved error handling, as
specified in the GPU subsystem TODO list.
Link: https://docs.kernel.org/gpu/todo.html#transition-away-from-using-deprecated-mipi-dsi-functions
Signed-off-by: Robert-Andrei Mercea <robertandreimercea@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260720115126.666363-1-robertandreimercea@gmail.com
|
|
Merge the introduction of acpi_dev_is_video_device() along with some
following driver updates related to it (from Andy Shevchenko).
* acpi-video:
platform/x86: thinkpad_acpi: Convert to use acpi_dev_is_video_device() helper
PCI/VGA: Convert to use acpi_dev_is_video_device() helper
i2c: acpi: Convert to use acpi_dev_is_video_device() helper
ACPI: video: Convert to use acpi_dev_is_video_device() helper
ACPI: scan: Convert to use acpi_dev_is_video_device() helper
ACPI: utils: Introduce acpi_dev_is_video_device() helper
|
|
* icc-misc
interconnect: qcom: add COMPILE_TEST
interconnect: qcom: simplify allocation
interconnect: debugfs-client: add NULL check for platform_device_alloc
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add interconnect bindings and RPMh-based interconnect driver support for
the upcoming Qualcomm Maili SoC.
* icc-maili
dt-bindings: interconnect: qcom: document the RPMh Network-On-Chip interconnect in Maili SoC
interconnect: qcom: add Maili interconnect provider driver
Link: https://patch.msgid.link/20260622-maili_icc-v2-0-18b5ac08c04f@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add Epoch Subsystem (EPSS) L3 scaling support on Qualcomm Shikra SoC.
EPSS hardware on Shikra is similar to other SoCs but supports only twelve
L3 frequency entries (LUT). Reading the LUT beyond supported frequencies
can expose incorrect frequencies.
Introduce new compatible to represent this constrained variant of EPSS.
* icc-shikra
dt-bindings: interconnect: qcom,osm-l3: Add EPSS L3 DT binding for Qualcomm Shikra SoC
interconnect: qcom: Add EPSS L3 scaling support for Shikra SoC
Link: https://patch.msgid.link/20260603-shikra_epss_l3-v3-0-3c2e0b796e78@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock.
Fixes: 3791163602f7 ("interconnect: Handle memory allocation errors")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://patch.msgid.link/20260416190840.1753468-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while
notifying listeners but continues to retain the per-protocol list head.
When two SCMI drivers for the same protocol unregister concurrently, one
thread can remove the final request and free the list head while the other
is running its notifier. The latter then dereferences the freed list head
after reacquiring the mutex and can free it a second time.
Complete the list and IDR updates, including freeing an empty list head,
before dropping the mutex. Keep the blocking notifier outside the critical
section and retain only the detached request across the callback.
Fixes: d3cd7c525fd2 ("firmware: arm_scmi: Refactor protocol device creation")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://patch.msgid.link/20260722095250.2011630-1-sudeep.holla@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Implement completion counters for the EFA device. Each completion
counter is backed by two EFA event counters, one for success
completions and one for error completions.
The driver creates umem for counters from private descriptor ioctl
attributes using core utility.
Read operations are not implemented as the counter values are accessed
directly from userspace through the mapped memory.
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-7-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Align device interface definitions.
Reviewed-by: Daniel Kinsbursky <dkinsb@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-6-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Track completion counter objects in the resource tracking database so
they are visible through the rdma netlink interface. The rdma tool
displays the comp_cntr count in the resource summary.
Add RDMA_RESTRACK_COMP_CNTR type, embed rdma_restrack_entry in
ib_comp_cntr, and add the res_to_dev mapping. Register the resource
on create and remove it on destroy.
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-5-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add a dedicated query interface for completion counter capabilities
via UVERBS_METHOD_QUERY_COMP_CNTR_CAPS on the device object.
The query returns the maximum number of counters, maximum counter
value, and a bitmask of supported QP attach operations. Each field
is an optional ioctl attribute, allowing userspace to request only
the capabilities it needs.
Drivers implement the query_comp_cntr_caps operation to report
device-specific capabilities.
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-4-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Reject comp_cntr destroy while it is attached to any QP. Track
attachments using an xarray in ib_qp keyed by the attach op_mask.
Use op bitmask to reject overlapping attaches early.
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-3-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add core infrastructure for Completion Counters, a light-weight
alternative to polling CQ for tracking operation completions.
Define the UVERBS_OBJECT_COMP_CNTR ioctl object with create, destroy,
modify and read methods for both success and error counters. Add a QP
attach method on the QP object to associate a completion counter with a
queue pair.
Add ib_comp_cntr struct, ib_comp_cntr_attach_attr, device ops, and
DECLARE_RDMA_OBJ_SIZE for driver object allocation.
Only userspace Completion Counters are supported at this stage.
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20260722083603.30334-2-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When accessing a PD via the netlink path the only synchronization
mechanism for the said PD is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_dealloc_pd_user(), which is too late, since by that point
vendor-specific resources associated with the PD might already be
freed. This can leave a short window where the PD remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_dealloc_pd_user(), ensuring that the PD is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a PD that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable.
Fixes: 91a7c58fce06 ("RDMA: Restore ability to fail on PD deallocate")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-8-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When accessing a dmah via the netlink path the only synchronization
mechanism for the said dmah is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
uverbs_free_dmah(), which is too late, since by that point
vendor-specific resources associated with the dmah might already be
freed. This can leave a short window where the dmah remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
uverbs_free_dmah(), ensuring that the dmah is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a dmah that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable.
Fixes: d83edab562a4 ("RDMA/core: Introduce a DMAH object and its alloc/free APIs")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-7-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_free_cq(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the freeing
of the vendor-specific resources ensuring that the CQ is removed from
restrack before its internal resources are released.
This guarantees that no new users hold references to a CQ that is in
the process of destruction.
Fixes: 43d781b9fa56 ("RDMA: Allow fail of destroy CQ")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-6-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When accessing a counter via the netlink path the only synchronization
mechanism for the said counter is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
counter_release(), which is too late, since by that point
vendor-specific resources associated with the counter might already be
freed. This can leave a short window where the counter remains
accessible through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the
freeing of the vendor-specific resources, ensuring that the counter is
removed from restrack before its internal resources are released.
This guarantees that no new users hold references to a counter that is
in the process of destruction.
Fixes: 99fa331dc862 ("RDMA/counter: Add "auto" configuration mode support")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-5-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When accessing a SRQ via the netlink path the only synchronization
mechanism for the said SRQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_srq_user(), which is too late, since by that point
vendor-specific resources associated with the SRQ might already be
freed. This can leave a short window where the SRQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_srq_user(), ensuring that the SRQ is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a SRQ that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable.
Fixes: 48f8a70e899f ("RDMA/restrack: Add support to get resource tracking for SRQ")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-4-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_cq_user(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_cq_user(), ensuring that the CQ is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a CQ that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable.
Fixes: 08f294a1524b ("RDMA/core: Add resource tracking for create and destroy CQs")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-3-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When querying a QP via the netlink flow the only synchronization
mechanism for the said QP is rdma_restrack_get(), meanwhile during the
QP destroy path rdma_restrack_del() is called at the end of the
ib_destroy_qp_user() function which is too late, since by then the
vendor specific resources for said QP would already be destroyed, and
till the rdma_restrack_del() is called this QP can still be accessed,
which could cause the use after free below.
Fix this by moving the rdma_restrack_begin_del() to the start of the
ib_destroy_qp_user(), which in turn waits for all usages of the QP to be
done then removes it from the database to prevent access to it while it
is being destroyed.
RIP: 0010:ib_query_qp+0x15/0x50 [ib_core]
Code: 48 83 05 5d 8e b9 ff 01 eb b5 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 46 40 00 00 00 00 48 c7 46 78 00 00 00 00 <48> 8b 07 48 8b 80 88 01 00 00 48 85 c0 74 1a 48 83 05 54 91 b9 ff
RSP: 0018:ff11000108a8f2f0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ff11000108a8f370 RCX: ff11000108a8f370
RDX: 0000000000000000 RSI: ff11000108a8f3d8 RDI: 0000000000000000
RBP: ff1100010de5a000 R08: 0000000000000e80 R09: 0000000000000004
R10: ff110001057a604c R11: 0000000000000000 R12: ff11000108a8f370
R13: ff110001090e8000 R14: 0000000000000000 R15: ff110001057a602c
FS: 00007f2ffd8db6c0(0000) GS:ff110008dc90b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010b9a7004 CR4: 0000000000373eb0
Call Trace:
<TASK>
mlx5_ib_gsi_query_qp+0x21/0x50 [mlx5_ib]
mlx5_ib_query_qp+0x689/0x9d0 [mlx5_ib]
ib_query_qp+0x35/0x50 [ib_core]
fill_res_qp_entry_query.isra.0+0x47/0x280 [ib_core]
? __wake_up+0x40/0x50
? netlink_broadcast_filtered+0x15a/0x550
? kobject_uevent_env+0x562/0x710
? ep_poll_callback+0x242/0x270
? __nla_put+0xc/0x20
? nla_put+0x28/0x40
? nla_put_string+0x2e/0x40 [ib_core]
fill_res_qp_entry+0x138/0x190 [ib_core]
res_get_common_dumpit+0x4a5/0x800 [ib_core]
? fill_res_qp_entry_query.isra.0+0x280/0x280 [ib_core]
nldev_res_get_qp_dumpit+0x1e/0x30 [ib_core]
netlink_dump+0x16f/0x450
__netlink_dump_start+0x1ce/0x2e0
rdma_nl_rcv_msg+0x1d3/0x330 [ib_core]
? nldev_res_get_qp_raw_dumpit+0x30/0x30 [ib_core]
rdma_nl_rcv_skb.constprop.0.isra.0+0x108/0x180 [ib_core]
rdma_nl_rcv+0x12/0x20 [ib_core]
netlink_unicast+0x255/0x380
? __alloc_skb+0xfa/0x1e0
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x230
? copy_msghdr_from_user+0xea/0x170
___sys_sendmsg+0x7c/0xb0
? __futex_wait+0x95/0xf0
? __futex_wake_mark+0x40/0x40
? futex_wait+0x67/0x100
? futex_wake+0xac/0x1b0
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xb90
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-2-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add rdma_restrack_abort_del(), rdma_restrack_begin_del() and
rdma_restrack_commit_del() functions to allow deleting a resource from
the xarray to effectively prevent future access to it and wait for all
current users to finish while preserving its index in the xarray to
allow to re-insert it if needed with guaranteed success.
This is a preparatory change for subsequent patches in the series
which will use these functions to fix the cleanup flow.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260713-restrack-uaf-fix-resub-v2-1-bbe8bb270d51@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
platform_device_alloc() may return NULL when memory allocation fails.
Add proper error handling to prevent a potential NULL pointer
dereference when calling platform_device_add() with a NULL pointer.
Signed-off-by: Li Jun <lijun01@kylinos.cn>
Link: https://patch.msgid.link/20260602103120.2966458-1-lijun01@kylinos.cn
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
mana_table_store_ud_qp() publishes a QP at its send-queue id before
inserting the receive-queue id, dropping the XArray lock between the two
xa_insert_irq() calls. A concurrent completion handler can look up the QP
and take a transient reference. When the second insertion fails, the
rollback erased only the send-queue entry and returned, leaving both the
initial table reference and the transient reference outstanding while RDMA
core frees the QP, causing a use-after-free.
Drain the reference as normal destruction does: drop the initial reference
and wait for qp->free, releasing the QP only after every concurrent lookup
returns its reference.
Fixes: 8001e9257eca ("RDMA/mana_ib: extend mana QP table")
Link: https://patch.msgid.link/20260721-if-mana-table-store-qp-qids-partiall-v1-1-8fb3d2d2b559@nvidia.com
Reviewed-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The interrupt-status packet reports transmit credits returned by the
device. edge_interrupt_callback() adds the 16-bit value to txCredits
without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount
of data that fits. Since the FIFO is allocated with maxTxCredits bytes,
txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never
hit the cap.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Sunho Park <shpark061104@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Based on wpa_auth as 1x_256 mode, need to set up
"use_fwsup" with BRCMF_PROFILE_FWSUP_1X.
Or it will happen trace warning when call brcmf_cfg80211_set_pmk().
[ 4481.831101] ------------[ cut here ]------------
[ 4481.831102] WARNING: CPU: 1 PID: 2997 at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac]
[...]
[ 4481.831202] Call Trace:
[ 4481.831204] <TASK>
[ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211]
[ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150
[ 4481.831237] genl_rcv_msg+0x104/0x240
[ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211]
[ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150
[ 4481.831259] netlink_rcv_skb+0x4e/0x100
[ 4481.831261] genl_rcv+0x24/0x40
[ 4481.831262] netlink_unicast+0x236/0x380
[ 4481.831264] netlink_sendmsg+0x250/0x4b0
[ 4481.831266] sock_sendmsg+0x5c/0x70
[ 4481.831269] ____sys_sendmsg+0x236/0x2b0
[ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0
[ 4481.831272] ___sys_sendmsg+0x86/0xd0
[ 4481.831274] ? avc_has_perm+0x8c/0x1a0
[ 4481.831276] ? preempt_count_add+0x6a/0xa0
[ 4481.831279] ? sock_has_perm+0x82/0xa0
[ 4481.831280] __sys_sendmsg+0x57/0xa0
[ 4481.831282] do_syscall_64+0x38/0x90
[ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4481.831286] RIP: 0033:0x7fd270d369b4
Fixes: 2526ff21aa77 ("brcmfmac: support 4-way handshake offloading for 802.1X")
Signed-off-by: Shelley Yang <shelley.yang@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260525083859.581246-1-shelley.yang@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use a flexible array member to reduce allocation by 1.
Add __counted_by for extra runtime analysis. Move counting variable
assignment after allocation before any array access.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609222454.37352-1-rosenp@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Allow non-ARM to build this.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608050542.6167-1-rosenp@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Update the CQE structure to include hardware timestamp.
When firmware supports RDMA completion timestamps,
the hardware populates the timestamp field.
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20260610154216.712374-5-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Enable user space applications to access the PHC state page when
firmware RDMA completion timestamp is supported.
This mapping allows user space to convert RDMA completion timestamps
to system wall time without kernel transitions, minimizing latency
overhead. Applications can directly read the PHC state through mmap,
enabling efficient timestamp correlation for precision timing
applications.
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20260610154216.712374-4-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add a page associated with the PHC that can be mapped to user space,
allowing applications to access hardware timestamp information.
In order to synchronize between kernel and user space, a sequence
number is incremented at the beginning and end of each update.
An odd number means the data is being updated while an even number
means the update is complete. To guarantee that the data structure
was accessed atomically, user space will:
repeat:
seq1 = <read sequence>
goto <repeat> if odd
<read PHC state>
seq2 = <read sequence>
if seq1 != seq2 goto repeat
This mechanism acts as a guard against reading invalid state during
concurrent updates.
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20260610154216.712374-3-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, the driver only registers the PTP Hardware Clock (PHC) if
Ethernet hardware timestamping is supported. Update the registration
logic to register the PHC if the device supports either Ethernet
hardware timestamping or RDMA completion timestamping.
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20260610154216.712374-2-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls
erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring
through get_next_valid_eqe() and updates eq->dbrec through notify_eq().
erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ.
free_irq() prevents another hard IRQ and waits for an in-flight handler,
but it does not drain a tasklet that the handler already scheduled. The
tasklet can therefore access eq->qbuf or eq->dbrec after
erdma_eq_destroy() frees them.
Clearing ceq_cb->ready does not synchronize with a tasklet that already
passed the check at the start of erdma_ceq_completion_handler().
Kill the tasklet after free_irq(), when no handler can schedule it again,
and before erdma_ceq_uninit_one() releases the EQ buffers.
Fixes: f2a0a630b953 ("RDMA/erdma: Add event queue implementation")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260721082545.47395-1-mhun512@gmail.com
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add support for a PCIe phys found on Qualcomm ipq5210 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721-pcie-phy-v5-2-8d403ef7e780@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Allocate saved_regs before pm_runtime_resume_and_get() so a
devm_kmalloc() failure does not leave an unreleased runtime PM usage
counter.
Fixes: 5af9b304bc60 ("phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260720153832.1130006-3-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Propagate clk_prepare_enable() failures to the caller instead of
returning success, and disable the reference clock on initialization
error paths to avoid leaking clock references when phy_exit() is not
called.
Fixes: 25d700833513 ("phy: xilinx: phy-zynqmp: dynamic clock support for power-save")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260720153832.1130006-2-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add init sequence and phy configuration for the Super Speed port on Shikra
SoC. Also since Shikra uses 3 resets, add support for the third reset and
configure Shikra platform data to use 3 resets.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-4-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add init sequence and phy configuration for Shikra. Since the init
sequence is same as that of QCS615, reuse the existing init table in
Shikra.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-3-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Per DP 1.4a section 2.2.4.3, the MSA MISC1 VSC_SDP bit signals that
the sink should defer colorimetry to the VSC SDP. It should only be set
when the sink advertises DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED and a
VSC SDP with pixel encoding/colorimetry payload will actually be sent.
Fold the colorimetry_support check into intel_dp_needs_vsc_colorimetry()
so both intel_ddi_set_dp_msa() and intel_dp_compute_vsc_sdp() share a
single consistent gate.
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Pranay Samala <pranay.samala@intel.com>
Link: https://patch.msgid.link/20260709113951.3557968-3-chaitanya.kumar.borah@intel.com
|
|
The function answers whether a VSC SDP with colorimetry and pixel
encoding payload is required by the content being displayed.
Rename it to reflect that.
No functional change intended.
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Pranay Samala <pranay.samala@intel.com>
Link: https://patch.msgid.link/20260709113951.3557968-2-chaitanya.kumar.borah@intel.com
|
|
The intention of the code is to extract the PCCR8_SGMIIa_CFG field out
of the "pccr" value, not to create a new value with the PCCR8_SGMIIa_CFG
field set to the "pccr" value.
Since FIELD_GET() is implemented as ((reg) & (mask)) >> __bf_shf(mask)
and FIELD_PREP() as (val) << __bf_shf(mask)) & (mask) and since "mask"
is GENMASK(2, 0), in practice there is no functional difference between
FIELD_GET() and FIELD_PREP(). But FIELD_GET() is logically the correct
helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260612125731.133330-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
HPAGE_PMD_SHIFT expands to BUILD_BUG() when CONFIG_PGTABLE_HAS_HUGE_LEAVES
is not set, causing a compile error when both CONFIG_TRANSPARENT_HUGEPAGE
and CONFIG_HUGETLB_PAGE are disabled:
drivers/gpu/drm/drm_pagemap.c:480:12: error: call to '__compiletime_assert_458'
declared with 'error' attribute: BUILD_BUG failed
480 | order = HPAGE_PMD_ORDER;
| ^
include/linux/huge_mm.h:117:26: note: expanded from macro 'HPAGE_PMD_ORDER'
117 | #define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT)
| ^
include/linux/huge_mm.h:113:28: note: expanded from macro 'HPAGE_PMD_SHIFT'
113 | #define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
Define DRM_PAGEMAP_PMD_ORDER, which maps to HPAGE_PMD_ORDER when
CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled and to -1 otherwise.
This is safe because all code paths that use DRM_PAGEMAP_PMD_ORDER are
reachable only when CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled.
Fixes: 139ab31aea8a ("drm/pagemap: Correct cpages calculation for migrate_vma_setup")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202607201914.LpAGsbXs-lkp@intel.com/
Cc: Jan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721223244.1102276-1-matthew.brost@intel.com
|
|
DRM pagemap overloads the migration PFN array to store driver-provided
PFNs before calling migrate_vma_*() to finalize the migration. If an
error occurs during the incremental copy phase, the migration PFN
entries are reverted to their original state. After reverting the
device-folio mutations, clear any remaining driver-provided PFNs to
avoid confusing the migrate_vma_*() helpers.
Also clear any driver-provided PFNs if populate_devmem_pfn() fails, as
a precaution against stale entries being interpreted as migration PFNs.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 3902846af36b ("drm/pagemap Fix error paths in drm_pagemap_migrate_to_devmem")
Fixes: ec265e1f1cfc ("drm/pagemap: Support source migration over interconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721204353.1082632-1-matthew.brost@intel.com
|
