| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When building with 'make M=drivers/gpu/drm/xe modules', kbuild invokes
scripts/Makefile.build with obj=., causing $(obj) to expand to '.'.
Make normalizes './xe_gen_wa_oob' to 'xe_gen_wa_oob' when constructing
the $^ automatic variable (target name normalization), so the recipe
command becomes just 'xe_gen_wa_oob ...' without any path prefix, and
the shell cannot find the tool.
Fix by replacing $^ with explicit $(obj)/xe_gen_wa_oob and
$(src)/<rules-file> references in both wa_oob recipe commands.
In recipe strings, make does not apply target name normalization, so
$(obj)/xe_gen_wa_oob correctly expands to './xe_gen_wa_oob' and the
shell can execute it. This matches the pattern already used by other
DRM drivers (e.g. radeon's mkregtable).
Fixes: f037e0b78e6d ("drm/xe: add xe_device_wa infrastructure")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260604074501.172129-1-thomas.hellstrom@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec and netfilter.
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth:
- bnxt_en: fix NULL pointer dereference
- emac: fix use-after-free during device removal
- octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- tun: zero the whole vnet header in tun_put_user()
- sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry
cancellation
- eth:
- mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- mvpp2: sync RX data at the hardware packet offset"
* tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
octeontx2-af: fix IP fragment flag corruption on custom KPU profile load
ipv6: Fix a potential NPD in cleanup_prefix_route()
net: txgbe: initialize PHY interface to 0
net: txgbe: distinguish module types by checking identifier
net: txgbe: initialize module info buffer
net: mvpp2: build skb from XDP-adjusted data on XDP_PASS
net: mvpp2: refill RX buffers before XDP or skb use
net: mvpp2: limit XDP frame size to the RX buffer
net: mvpp2: sync RX data at the hardware packet offset
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
rds: mark snapshot pages dirty in rds_info_getsockopt()
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
ptp: ocp: fix resource freeing order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Fix OF node refcount
- ti: Fix wakeup configuration for parent devices of wakeup sources
* tag 'pmdomain-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: fix OF node refcount
pmdomain: ti_sci: add wakeup constraint to parent devices of wakeup source
|
|
The ECs in the IdeaPads that need the delay_suspend quirk send lots
of messages when charging, which not only causes intermediate wakeups
when suspended, but also prevents the device from reaching the deepest
suspend state.
Because of this amd_pmc_intermediate_wakeup_need_delay() returns false
during intermediate wakeups and amd_pmc_want_suspend_delay() is called.
So far it always logged its "Delaying suspend by 2.5s ..." messages
then, which spams dmesg. This commit makes sure that those messages are
only logged once per suspend.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-5-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enabling the new delay_suspend module parameter delays suspend for
2.5 seconds which is known to help for some AMD-based Lenovo Laptops
that otherwise failed to send/receive events for key presses or the
lid switch after s2idle. Apparently the EC needs to do some things
in the background before suspend or it gets into a bad state.
There are many reports of AMD-based laptops (mostly but not exclusively
IdeaPads) about similar issues on the web; this parameter gives
affected users an easy way to try out if their issues have the same
root cause and to work around them until their specific device is added
to the quirks list.
The parameter description has a note encouraging users to report
their device so it can be added to the quirks list, inspired by a
similar request in parameter descriptions of the ideapad-laptop module.
The module parameter can be set to "1" to explicitly enable it,
"0" to disable it even on devices that are assumed to be affected,
or -1 (the default) to enable it if the device is assumed to be affected
(according to fwbug_list[])
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-4-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some IdeaPad Slim 3 devices and similar with AMD CPUs have a
nonfunctional keyboard and lid switch after s2idle.
It helps to delay suspend by 2.5 seconds so the EC has some time
to do whatever it needs to get done before suspend - unfortunately
at least on my 16ABR8 waking it with a timer (wakealarm) still
triggers the issue, but at least normal resume via keypress or
lid works fine. On the 14ARP10 wakealarm has been reported to also
work fine with this patch.
This issue has been reported for many different devices, this patch
has been tested with the Zen3-based IdeaPad Slim 3 16ABR8 (82XR)
and the Zen3+-based IdeaPad Slim 3 14ARP10 (83K6) and IdeaPad Slim 3
15ARP10 (83MM).
Reported-by: Sindre Henriksen <sindrehenriksen93@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221383
Tested-by: Sindre Henriksen <sindrehenriksen93@gmail.com>
Suggested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-3-daniel@gibson.sh
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Refactor code introduced by commit 9f5595d5f03f ("pmc: Require at
least 2.5 seconds between HW sleep cycles") to allow adding different
conditions for that delay in an upcoming change.
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611150426.3683372-2-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again.
Fixes: e486147c912f ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260610151127.2994185-1-lizhi.hou@amd.com
|
|
Merge thermal control testing facility updates for 7.2:
- Replace sscanf() with kstrtoul() or kstrtoint() in several places in
the thermal testing code (Ovidiu Panait)
- Make the thermal testing facility reject missing command arguments to
avoid NULL pointer dereferences (Samuel Moelius)
* thermal-testing:
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix NULL pointer dereference in gpio-mvebu
- fix runtime PM leak in remove path in gpio-zynq
- reject invalid module params in gpio-mockup
- fix generic IRQ chip leak in remove parh in gpio-rockchip
- fix resource leaks in GPIO chip cleanup path on hog failure
- fix a regression in how GPIO hogging code handles multiple GPIO chips
reusing the same OF node
* tag 'gpio-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: handle gpio-hogs only once
gpio: fix cleanup path on hog failure
gpio: rockchip: fix generic IRQ chip leak on remove
gpio: mockup: reject invalid gpio_mockup_ranges widths
gpio: zynq: fix runtime PM leak on remove
gpio: mvebu: fix NULL pointer dereference in suspend/resume
|
|
|
|
Add the missing documentation for the newly added clkout_ctl_phy field.
Fixes: 2775541de058 ("phy: rockchip: inno-usb2: Add clkout_ctl_phy support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605150315.MyBNQOPB-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260520102859.1357411-1-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505102913.188406-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add basic driver support for NXPs TJA1145 CAN transceiver which brings the
PHY up/down by switching to normal/standby mode using SPI commands.
Tested-by: lee.lockhey@gmail.com
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20260602-tja1145-support-v6-2-0e0ffc8ee63d@liebherr.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
probe error path
If mixel_lvds_phy_reset() fails in probe after pm_runtime_enable(),
the function returns directly without calling pm_runtime_disable(),
leaving runtime PM permanently enabled for the device.
Fix this by using devm_pm_runtime_enable() so that cleanup is
automatic on any probe failure or driver unbind. This also allows
removing the manual err label and the .remove callback.
Fixes: 06ff622d61d2 ("phy: freescale: Add i.MX8qm Mixel LVDS PHY support")
Acked-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260605-lvds-v2-1-3ce7539d1104@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
While system heap and system_cc_shared heap share a lot of code
and hence the same source file, their users have different needs.
system heap users need it to be a loadable module, while
system_cc_shared heap users don't.
Building as a loadable module breaks system_cc_shared heap on
powerpc and s390 due to un-exported set_memory_encrypted /
set_memory_decrypted functions.
Fix these by reorganising code to put the system_cc_shared heap
under a new Kconfig symbol, which allows either building both
into the kernel, or leave encryption up to the consumers of the
system heap.
Fixes: fd55edff8a0a ("dma-buf: heaps: system: Turn the heap into a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: updated DMABUF_HEAPS_CC_SYSTEM to DMABUF_HEAPS_SYSTEM_CC_SHARED]
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260610142329.3836808-1-sumit.semwal@linaro.org
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260518111203.639603-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
A recent change switching to a dynamically allocated root device broke
platforms like rcar-sysc that registers PM domains before the PM domain
bus itself has been registered (cf. commit c5ae5a0c6112 ("pmdomain:
renesas: rcar-sysc: Add genpd OF provider at postcore_initcall")).
Defer the assignment of the parent root device until the domain is
registered with driver core to avoid it being left unset.
Fixes: a96e40f4afdc ("pmdomain: core: switch to dynamic root device")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdUHabMGJyJ7e7yp7DLC+JJc9k6NK9p4anj2wRKNuwZUng@mail.gmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The driver explicitly sets the .driver_data member of struct
pnp_device_id to zero without relying on that value. Drop these unused
assignments.
While touching this array use a named initializer for .id for improved
readability and simplify the list terminator.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with an x86 build.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/dd6e70d3075205a1d5c1fa324db7a822f37e2349.1781101905.git.u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The hid-logitech-hidpp driver enables high resolution scrolling on
device connect for capable HID++ 2.0 devices. Driver also reads the
wheel capability and caches the returned high resolution wheel scroll
multiplier, that is used for scroll scaling when handling wheel scroll
events.
Wheel mode can also be set externally through HID++ requests, which
can leave the cached multiplier stale and cause incorrect scroll
scaling. If external SetWheelMode HID++ request sets the mode to
low resolution, the cached multiplier is not updated accordingly. This
causes extremely slow scrolling since driver expects multiple wheel
scroll events per detent but is only getting one.
The fix listens for HID++ SetWheelMode request responses and updates
the wheel scroll multiplier based on the set high resolution scroll
mode. The fix has been tested with Logitech G502X lightspeed mouse.
Signed-off-by: Lauri Saurus <saurla@saurla.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
In case of failed HW the driver may not see an interrupt and will stuck
in waiting forever. We can avoid such situation by timing out of
transfers if the interrupt is not seen in a reasonable time.
This problem can be found on unload of ptp_ocp driver for TimeCard which
uses Xilinx SPI AXI and SPI-NOR flash memory. During tear-down process
spi-nor drivers send soft reset command which is not triggering an
interrupt stalling the unload process completely.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260610222843.782337-1-vadim.fedorenko@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A comment in drivers/iommu/apple-dart.c incorrectly refers to
CONFIG_PCI_APPLE instead of CONFIG_PCIE_APPLE. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
A job that GuC never scheduled (never started) indicates a GuC
scheduling failure; previously such jobs were silently errored out
instead of triggering a GT reset to recover. Trigger a GT reset and
resubmit them, but only when the queue was not already killed or banned:
an unstarted job on an already banned queue is the ban working as
intended and must neither clear the ban nor kick off a reset, otherwise
a banned userspace queue could be resurrected and spam GT resets.
Kernel queues are always recovered this way and wedge the device once
recovery attempts are exhausted, since kernel work must not silently
fail. A started job that times out on a userspace VM bind queue stays
banned rather than being reset and retried.
The queue is banned early in the timeout handler to signal the G2H
scheduling-done handler so it wakes the disable-scheduling waiter;
without it the waiter sleeps the full 5s timeout. When a reset is
warranted the ban is cleared before rearming so that
guc_exec_queue_start() can resubmit jobs after the GT reset - a
still-banned queue would block resubmission and cause an infinite TDR
loop. The already-banned case is gated out before this point via
skip_timeout_check, so it is unaffected.
v2: (Himal) Do it for any queue type, not just kernel/migration
v3: - (Sashiko and Sanjay): don't clear the ban / GT reset for already
killed/banned queues on unstarted-job timeout
- Update commit message
- (Matt) Add Fixes tag
Fixes: fe05cee4d953 ("drm/xe: Don't short circuit TDR on jobs not started")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Assisted-by: GitHub-Copilot:claude-opus-4.8
Tested-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260610152548.404575-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b1107d085e7e8ed15ba6f80c102528a9c8a6cb0e)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
xe_range_fence_insert() acquires a reference on fence via
dma_fence_get() and stores it in rfence->fence. It then calls
dma_fence_add_callback() and handles two cases: when the callback
is successfully registered (err == 0) the fence is transferred to
the tree for later cleanup; when the fence is already signaled
(err == -ENOENT) it manually drops the extra reference with
dma_fence_put(fence).
However, dma_fence_add_callback() can fail with other errors
(e.g. -EINVAL) and in that case the code falls through to the free:
label without releasing the acquired reference, leaking it.
Fix the leak by adding an else branch that calls dma_fence_put()
before jumping to free: for any error other than -ENOENT.
Fixes: 845f64bdbfc9 ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260610172705.3450560-1-matthew.brost@intel.com
(cherry picked from commit 98c4a4201290823c2c5c7ba21692bd9a64b61021)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Merge an ACPI processor driver update, two ACPI CPPC library updates
and ACPI PCI/CXL support updates for 7.2-rc1:
- Add cpuidle driver check in acpi_processor_register_idle_driver() to
avoid evaluating _CST unnecessarily (Tony W Wang-oc)
- Suppress UBSAN warning caused by field misuse during PCC-based
register access in the ACPI CPPC library (Jeremy Linton)
- Add support for CPPC v4 to the ACPI CPPC library (Sumit Gupta)
- Update the ACPI device enumeration code to honor _DEP for ACPI0016
PCI/CXL host bridges and make the ACPI PCI root driver clear _DEP
dependencies for PCI roots that have become operational (Chen Pei)
* acpi-processor:
ACPI: processor: Add cpuidle driver check in acpi_processor_register_idle_driver()
* acpi-cppc:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
ACPI: CPPC: Add support for CPPC v4
* acpi-pci:
ACPI: scan: Honor _DEP for ACPI0016 PCI/CXL host bridge
ACPI: PCI: Clear _DEP dependencies after PCI root bridge attach
|
|
Fixes the following warning that fires during timeout handling for a
context running on the USM-reserved copy engine:
xe 0000:03:00.0: [drm] Tile0: GT0: Unexpected engine class:instance 3:8 for utilization
WARNING: at engine_id_to_hwe+0x88/0xc0 [xe]
xe_lrc_context_timestamp+0x61/0xb0 [xe]
guc_exec_queue_timedout_job+0x713/0x1020 [xe]
class:instance 3:8 is XE_ENGINE_CLASS_COPY on the highest BCS instance,
which xe_hw_engine.c reserves for USM (gt->usm.reserved_bcs_instance) and
on which the migrate engine runs kernel contexts. When such a context's
utilization is read - e.g. from the TDR path - engine_id_to_hwe()
rejected it because xe_hw_engine_is_reserved() is true, firing WARN_ONCE
and returning NULL, which made the timestamp read silently fall back to
stale data.
The reserved-engine guard was added defensively with the original WA BB
utilization support and simply overlooked that the migrate engine is a
valid, present engine whose CTX_TIMESTAMP can legitimately be read.
Allow the USM-reserved copy engine specifically (xe_gt_is_usm_hwe()),
while still rejecting the other reserved cases (GSCCS / XE_ENGINE_CLASS_
OTHER and ccs_mode-disabled compute engines), which would indeed be
unexpected on this path. The dynamic engine resolution via the ENGINE_ID
stashed in the PPHWSP by the WA BB is kept intact, so utilization for
load-balanced/virtual exec queues still resolves the engine the context
is actually running on.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Assisted-by: GitHub-Copilot:claude-opus-4.8
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260610152548.404575-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A job that GuC never scheduled (never started) indicates a GuC
scheduling failure; previously such jobs were silently errored out
instead of triggering a GT reset to recover. Trigger a GT reset and
resubmit them, but only when the queue was not already killed or banned:
an unstarted job on an already banned queue is the ban working as
intended and must neither clear the ban nor kick off a reset, otherwise
a banned userspace queue could be resurrected and spam GT resets.
Kernel queues are always recovered this way and wedge the device once
recovery attempts are exhausted, since kernel work must not silently
fail. A started job that times out on a userspace VM bind queue stays
banned rather than being reset and retried.
The queue is banned early in the timeout handler to signal the G2H
scheduling-done handler so it wakes the disable-scheduling waiter;
without it the waiter sleeps the full 5s timeout. When a reset is
warranted the ban is cleared before rearming so that
guc_exec_queue_start() can resubmit jobs after the GT reset - a
still-banned queue would block resubmission and cause an infinite TDR
loop. The already-banned case is gated out before this point via
skip_timeout_check, so it is unaffected.
v2: (Himal) Do it for any queue type, not just kernel/migration
v3: - (Sashiko and Sanjay): don't clear the ban / GT reset for already
killed/banned queues on unstarted-job timeout
- Update commit message
- (Matt) Add Fixes tag
Fixes: fe05cee4d953 ("drm/xe: Don't short circuit TDR on jobs not started")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Assisted-by: GitHub-Copilot:claude-opus-4.8
Tested-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260610152548.404575-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Merge ACPI button driver updates for 7.2-rc1:
- Clean up lid handling in the ACPI button driver and
acpi_button_probe(), reorganize installing and removing event
handlers in that driver and switch it over to using devres-based
resource management during probe (Rafael Wysocki)
* acpi-button:
ACPI: button: Switch over to devres-based resource management
ACPI: button: Reorganize installing and removing event handlers
ACPI: button: Use string literals for generating netlink messages
ACPI: button: Clean up adding and removing lid procfs interface
ACPI: button: Merge two switch () statements in acpi_button_probe()
ACPI: button: Drop redundant variable from acpi_button_probe()
ACPI: button: Rework device verification during probe
ACPI: button: Use local pointer to platform device dev field in probe
ACPI: button: Eliminate redundant conditional statement
ACPI: button: Change return type of two functions to void
ACPI: button: Eliminate ternary operator from acpi_lid_evaluate_state()
ACPI: button: Use bool for representing boolean values
ACPI: button: Improve warning message regarding lid state
ACPI: button: Pass ACPI handle to acpi_lid_evaluate_state()
ACPI: button: Fix lid_device value leak past driver removal
|
|
Merge updates of core ACPI device drivers for 7.2-rc1:
- Fix multiple issues related to probe, removal and missing NVDIMM
device notifications in the ACPI NFIT driver (Rafael Wysocki)
- Add support for devres-based management of ACPI notify handlers to
the ACPI core (Rafael Wysocki)
- Switch multiple core ACPI device drivers (including the ACPI PAD,
ACPI video bus, ACPI HED, ACPI thermal zone, ACPI AC, ACPI battery,
and ACPI NFIT drivers) over to using devres-based resource management
during probe (Rafael Wysocki)
- Replace mutex_lock/unlock() with guard()/scoped_guard() in the ACPI
PMIC driver (Maxwell Doose)
- Fix message kref handling in the dead device path of the ACPI IPMI
address space handler (Yuho Choi)
- Use sysfs_emit() in idlecpus_show() in the ACPI processor aggregator
device (PAD) driver (Yury Norov)
- Clean up device_id_scheme initialization in the ACPI video bus driver
(Jean-Ralph Aviles)
* acpi-driver: (26 commits)
ACPI: IPMI: Fix message kref handling on dead device
ACPI: NFIT: core: Fix possible deadlock and missing notifications
ACPI: NFIT: core: Eliminate redundant local variable
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
ACPI: NFIT: core: Fix possible NULL pointer dereference
ACPI: bus: Clean up devm_acpi_install_notify_handler()
ACPI: PAD: Use sysfs_emit() in idlecpus_show()
ACPI: video: Do not initialise device_id_scheme directly
ACPI: video: Switch over to devres-based resource management
ACPI: video: Use devm for video->entry and backlight cleanup
ACPI: video: Use devm action for freeing video devices
ACPI: video: Use devm action for video bus object cleanup
ACPI: video: Rearrange probe and remove code
ACPI: video: Reduce the number of auxiliary device dereferences
ACPI: PAD: Switch over to devres-based resource management
ACPI: PAD: Fix teardown ordering in acpi_pad_remove()
ACPI: PAD: Pass struct device pointer to acpi_pad_notify()
ACPI: PAD: Rearrange acpi_pad_notify()
ACPI: thermal: Switch over to devres-based resource management
ACPI: HED: Switch over to devres-based resource management
...
|
|
pinctrl consumers can request states while the pinctrl core enables the
controller. On Qualcomm pinctrl drivers this can happen before the SoC
function list has been registered, which leaves the function table
incomplete during state lookup.
On APQ8064 this can fail while claiming pinctrl hogs:
apq8064-pinctrl 800000.pinctrl: invalid function ps_hold in map table
apq8064-pinctrl 800000.pinctrl: error claiming hogs: -22
apq8064-pinctrl 800000.pinctrl: could not claim hogs: -22
Register Qualcomm pinctrl with devm_pinctrl_register_and_init(), add the
SoC pin functions, and only then enable the pinctrl device.
Signed-off-by: Alexandre MINETTE <contact@alex-min.fr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Use pinctrl_find_gpio_range_from_pin_nolock() instead of
pinctrl_find_gpio_range_from_pin() when configuring a pin or
setting a GPIO value.
This avoids taking the lock and allows the code to be safely
called from interrupt context.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add support for the pin controller on the UltraRISC DP1000 SoC.
The controller provides mux selection for pins in ports A, B, C, D, and
LPC. Ports A-D default to GPIO and support peripheral muxing. LPC pins
can be switched to eSPI, but are not available as GPIOs. Basic pin
configuration controls such as drive strength, pull-up, and pull-down
are also supported.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Merge ACPICA updates for 7.2-rc1 including the following changes:
- Add support for the Legacy Virtual Register (LVR) field in I2C serial
bus resource descriptors to ACPICA (Akhil R)
- Fix multiple issues related to bounds checks, input validation,
use-after-free, and integer overflow checks in the AML interpreter
in ACPICA (ikaros)
- Update the copyright year to 2026 in ACPICA files and make minor
changes related to ACPI 6.6 support (Pawel Chmielewski)
- Remove spurious precision from format used to dump parse trees in
ACPICA (David Laight)
- Add modern standby DSM GUIDs to ACPICA header files (Daniel Schaefer)
- Fix FADT 32/64X length mismatch warning in ACPICA (Abdelkader Boudih)
- Update D3hot/cold device power states definitions in ACPICA header
files (Aymeric Wibo)
- Fix NULL pointer dereference in acpi_ns_custom_package() (Weiming
Shi)
- Update ACPICA version to 20260408 (Saket Dumbre)
* acpica: (27 commits)
ACPICA: add boundary checks in two places
ACPICA: Add package limit checks in parser functions
ACPICA: Update version to 20260408
ACPICA: Update the copyright year to 2026
ACPICA: Remove spurious precision from format used to dump parse trees
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
ACPICA: Fix NULL pointer dereference in acpi_ns_custom_package()
ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources()
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
ACPICA: validate handler object type in two places
ACPICA: Improve argument parsing in acpi_ps_get_next_simple_arg()
ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op)
ACPICA: Prevent adding invalid references
ACPICA: add boundary checks in acpi_ps_get_next_field()
ACPICA: validate byte_count in acpi_ps_get_next_package_length()
ACPICA: Fix use-after-free in acpi_ds_terminate_control_method()
ACPICA: fix I2C LVR item count in the conversion table
ACPICA: Mention the LVR bits
ACPICA: Change LVR to 8 bit value
ACPICA: Fetch LVR I2C resource descriptor
...
|
|
The macros QUP_I3C and UFS_RESET are defined in some platforms
and yet not used. Remove these macros as they are unnecessary.
Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The NVIDIA Tegra264 MAIN, AON, and UPHY pin controllers are only present
on NVIDIA Tegra264 SoCs. Hence add a dependency on ARCH_TEGRA, to
prevent asking the user about this driver when configuring a kernel
without NVIDIA Tegra SoC support.
Fixes: c98506206912dd0d ("pinctrl: tegra: Add Tegra264 pinmux driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The NVIDIA Tegra238 MAIN and AON pin controllers are only present on
NVIDIA Tegra238 SoCs. Hence add a dependency on ARCH_TEGRA, to prevent
asking the user about this driver when configuring a kernel without
NVIDIA Tegra SoC support.
Fixes: 25cac7292d49f4fc ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add 24 pin groups on ports EE, FF, GG and HH to the AON pin controller
group table (tegra238_aon_groups[]). Their pin arrays, drive-group
macros and pin descriptors were already defined, but the matching
PINGROUP() entries were not present, so these pins could not be muxed
or configured through the AON pin controller.
The pin arrays were not referenced, so the build emitted
-Wunused-const-variable warnings, and commit 119de2c33d96 ("pinctrl:
tegra238: remove unused entries") removed three of them. Restore those
arrays and add the full set of PINGROUP() entries to make the pins
usable.
Fixes: 25cac7292d49 ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
There is no need for a double space after an assignment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/80e30578b6dd86664112320616c460c48dbd79f6.1777881435.git.geert+renesas@glider.be
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
comments
Comments in drivers/platform/x86/dell/dell-wmi-privacy.h incorrectly
refer to CONFIG_DELL_PRIVACY instead of CONFIG_DELL_WMI_PRIVACY.
Correct them.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260611001238.391045-1-enelsonmoore@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP power limits and fan curve requirements for the ASUS ROG Strix
G16 G614PR laptop model.
The ASUS ROG Strix G16 G614PR requires specific AC/DC power limits
(PPT PL1/PL2/PL3, dynamic boost, and NV TGP targets) to function
correctly under various power profiles. Without these limits, the Asus
Armoury driver cannot configure the correct power envelopes or enable custom
fan curves, leading to suboptimal performance or noise management.
This patch adds the corresponding DMI board name matching entry ("G614PR")
under the power_limits table in asus-armoury.h, populating the AC and DC
limits based on the platform's hardware specification.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260610152130.25892-1-scardracs@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
pcm_spi_int, pcm_spi_cs2, pcm_spi_cs3, pcm_spi_cs4 pin groups are not
defined, so pcm_spi function can't be applied to these groups.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
phy1_led1 pin function wrongly refers to gpio1 instead of gpio11.
Fix it.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio22 pin group is missed, fix it.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio21 pin group refers to gpio22 pin, this is wrong.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
AN7581 have 47 valid GPIOs only (gpio0-gpio46), so gpio47 is a fiction.
AN7583 have 49 valid GPIOs (gpio0-gpio48), so gpio48 is missed
To fix an issue
* create AN7583 specific pwm pin function,
* remove gpio47 from AN7581 pwm pin function.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
phy4_led1 pin function maps led incorrectly. It uses the same map as
phy3_led1. PHY{X} should map to LAN{N}_PHY_LED_MAP(X-1).
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
phy4_led1 pin function maps led incorrectly. It uses the same map as
phy3_led1. PHY{X} should map to LAN{N}_PHY_LED_MAP(X-1).
Fixes: 579839c9548c ("pinctrl: airoha: convert PHY LED GPIO to macro")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Pin 21 (gpio19) duplicate pinconf settings of pin 20. Fix it using
a proper bit number in the configuration register.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Pin 32 (gpio19) duplicate pinconf settings of pin 31. Fix it using
a proper bit number in the configuration register.
Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
gpio32 pin group is missed for an7583 SoC. This patch add it.
Fixes: 3ffeb17a9a27 ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
