summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2026-06-16Merge branch 'idle-time-acc' into featuresAlexander Gordeev2-2/+2
Heiko Carstens says: =================== This is supposed to improve s390 idle time accounting, and brings it back to the state it was before arch_cpu_idle_time() was removed from s390 [3]. In result all cpu time accounting is done by the s390 architecture backend again, instead of having a mix of architecure specific and common code accounting (common code: idle, s390 architecture: everything else). =================== Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2026-06-16regcache: Do not overwrite error code when finalizing cache after errorFrancesco Lavra1-1/+1
During regcache initialization, if an error occurs in the cache_ops->populate callback, and if cache operations include an exit callback, the error code from populate() is overwritten with the return value from exit(). This hides the error condition from the caller of regcache_init(), and can cause NULL pointer dereferences when the regcache is later accessed. Fixes: 94a3a95f0315 ("regcache: Add ->populate() callback to separate from ->init()") Signed-off-by: Francesco Lavra <flavra@baylibre.com> Link: https://patch.msgid.link/20260616114429.1852456-1-flavra@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-16i2c: davinci: Unregister cpufreq notifier on probe failureHaoxiang Li1-1/+3
davinci_i2c_probe() registers a cpufreq transition notifier before adding the I2C adapter. If i2c_add_numbered_adapter() fails, the probe error path releases the device resources without unregistering the notifier. Add a dedicated error path to unregister the cpufreq notifier after i2c_add_numbered_adapter() fails. Fixes: 82c0de11b734 ("i2c: davinci: Add cpufreq support") Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Cc: <stable@vger.kernel.org> # v2.6.36+ Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260610030513.2651018-1-haoxiang_li2024@163.com
2026-06-16i2c: qcom-cci: Remove overcautious disable_irq() callsVladimir Zapolskiy1-4/+1
In cci_probe() the controller's interrupt is requested using a devres managed API, and in cci_probe() error path and cci_remove() it'd be safe to rely on devres mechanism to free and shutdown the interrupt, thus explicit disable_irq() calls can be removed as unnecessary ones. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260515234121.1607425-5-vladimir.zapolskiy@linaro.org
2026-06-16i2c: qcom-cci: Move cci_init() under cci_reset() functionVladimir Zapolskiy1-21/+20
On probe or runtime errors cci_reset() is called and it should be coupled with cci_init(), instead of doing this on caller's side, embed cci_init() directly into the cci_reset() function. This is a non-functional change, cci_reset() and cci_init() function bodies are reordered. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260515234121.1607425-4-vladimir.zapolskiy@linaro.org
2026-06-16i2c: qcom-cci: Do not check return value of cci_init()Vladimir Zapolskiy1-6/+2
The cci_init() function is not supposed to fail, and it never returns a non-zero, so it'd make sense to convert its signature to void. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260515234121.1607425-3-vladimir.zapolskiy@linaro.org
2026-06-16drm/i915/cmtg: Add CMTG interrupt handlingAnimesh Manna4-1/+46
Add support for the CMTG vblank interrupt, which is delivered through the DE port interrupt block. Enable/disable the interrupt via the DE port IMR around CMTG enable/disable, and dispatch the CMTG_VBLANK_{A,B} bits to the corresponding pipe vblank handler in the gen8 DE IRQ handler. Wired up for DISPLAY_VER 35. The CMTG interrupt is not enabled via IER today because CMTG is brought up together with the eDP transcoder; this can be revisited later. v2: - Use consistent DC3co check as used in earlier patches. [Uma] - Use else-if instead of separate if block. [Uma] - Merge mask and unmask function as it is similar. [Uma] - Modify DISPLAY_VER() check. [Uma] v3: - Enable only vblank interrupt. [Dibin] v4: - Keep irq related code to intel_display_irq.c. [Jani, Uma] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-23-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Restore CMTG after DC6 exitAnimesh Manna3-4/+42
Restore CMTG registers after DC6 exit, as they lose their values in the low-power state. v2: Introduce intel_cmtg_restore() instead of calling multiple cmtg functions. [Uma] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-22-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add trigger to enable/disable cmtgAnimesh Manna3-15/+41
Enable CMTG with fixed refresh rate mode and with dynamic dc state enabled. Disable CMTG with transcoder disable or if there is a transition to vrr mode from fixed refresh rate mode. v2: - Move the enabled flag update to avoid issue in the disable timeout path. [Uma] v3: - Introduce intel_cmtg_program() rather calling multiple cmtg functions. [Dibin] - Set clock select before cmtg disable as can lost during dc6 entry. [Dibin] - Disable cmtg interrupt in crtc-disable(). [Dibin] - Got R-b from Uma. v4: - Simplify the code further by moving for_each_new_intel_crtc_in_state inside intel_cmtg.c. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-21-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add CMTG scan line programmingDibin Moolakadan Subrahmanian2-0/+8
Enable the hardware based guardband calculations which allows DC3co to remain enabled when timings are changing from one fixed refresh rate to another fixed refresh rate. Bspec: 75253 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-20-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add CMTG HWGB programmingDibin Moolakadan Subrahmanian3-0/+41
Program CMTG guardband to generate the Lower/Upper and early entry guardband indicators to the DMC for DC3co control. v2: - Specify the unit for DC3CO entry/exit latency. [Uma] - Add code comment for default line_time_us. [Uma] Bspec: 75253 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-19-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Modify existing hook to disable CMTGDibin Moolakadan Subrahmanian3-3/+45
Earlier cmtg_disable() used to disable all instances of CMTG which cannot handle individual request for specific CMTG instance. Introduce cmtg_disable_all() which will disable all cmtg instances and cmtg_disable() only disable specific instance. v2: - Use intel_de_rmw to simplify. [Uma] v3: - Add a code comment describing when cpu_transcoder should be used instead of cmtg_transcoder. [Uma] Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-18-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add a hook to make eDP transcoder secondaryAnimesh Manna3-0/+19
Program DDI_FUNC_CTL2 to configure the eDP transcoder as secondary to the CMTG transcoder. v2: - Update commit header to be more clear. [Uma] Bspec: 68915 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-17-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add hook to enable CMTG with sync to portAnimesh Manna3-6/+29
Add a hook to enable CMTG by programming CMTG CTL with Sync to Port. When CMTG starts running, the Sync to Port bit will be cleared. Add a wait to check its running status and trigger WARN_ON() on timeout. Bspec: 69088 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-16-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Set link M/N for CMTG transcoderAnimesh Manna3-1/+18
Program CMTG link M/N. Not much to reuse so add a separate function for CMTG. Bspec: 68989 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-15-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Program VRR control register for CMTG transcoderAnimesh Manna3-0/+23
Add intel_cmtg_set_vrr_ctl() to program TRANS_VRR_CTL for the CMTG transcoder. Purposefully avoid using the existing VRR enable path, as many of its operations are not needed for CMTG. v2: Use sw state instead of reading from hardware. [Jani] v3: Program cmtg vrr control register along with vrr transcoder registers. [R-b from Uma] v4: Split out from vrr timing registers programming. Bspec: 68989 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-14-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Program VRR fixed-rate timings for CMTG transcoderAnimesh Manna4-0/+15
Program the VRR registers of CMTG, as the VRR timing generator will always be enabled for NVL. Add intel_cmtg_set_vrr_timings() which mirrors the per-transcoder VRR VMIN/VMAX/FLIPLINE programming on the CMTG transcoder paired with the pipe's cpu_transcoder. Invoke it from intel_vrr_set_transcoder_timings() and from the LRR fastset path, right after the existing intel_vrr_set_fixed_rr_timings() calls, so the CMTG VRR timing registers stay in sync with the cpu_transcoder's. v2: Use sw state instead of reading from hardware. [Jani] v3: Program cmtg vrr timing registers along with vrr transcoder registers. v4: Reuse vrr timing programming helper. Bspec: 68989 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-13-animesh.manna@intel.com
2026-06-16drm/i915/display: Rename cpu_transcoder parameter to transcoder in VRR ↵Animesh Manna2-5/+5
fixed-rr path intel_vrr_set_fixed_rr_timings() now takes the target transcoder as an explicit argument rather than implicitly using crtc_state->cpu_transcoder, so the parameter name 'cpu_transcoder' is misleading. Rename it to plain 'transcoder' to reflect that any transcoder may be programmed. No functional change. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-12-animesh.manna@intel.com
2026-06-16Merge tag 'linux_kselftest-kunit-7.2-rc1' of ↵Linus Torvalds1-6/+40
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: "Fixes to tool and kunit core and new features to both to support JUnit XML (primitive) and backtrace suppression API: - Core support for suppressing warning backtraces - Parse and print the reason tests are skipped - Add (primitive) support for outputting JUnit XML - Don't write to stdout when it should be disabled - Add backtrace suppression self-tests - Suppress intentional warning backtraces in scaling unit tests - Add documentation for warning backtrace suppression API - Fix spelling mistakes in comments and messages - gen_compile_commands: Ignore libgcc.a - qemu_configs: Add or1k / openrisc configuration" * tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit:tool: Don't write to stdout when it should be disabled kunit: tool: Add (primitive) support for outputting JUnit XML kunit: tool: Parse and print the reason tests are skipped kunit: Add documentation for warning backtrace suppression API drm: Suppress intentional warning backtraces in scaling unit tests kunit: Add backtrace suppression self-tests bug/kunit: Core support for suppressing warning backtraces kunit: Fix spelling mistakes in comments and messages kunit: qemu_configs: Add or1k / openrisc configuration gen_compile_commands: Ignore libgcc.a
2026-06-16drm/i915/vrr: Pass transcoder to intel_vrr_set_fixed_rr_timings()Animesh Manna3-6/+9
Take the target transcoder as an explicit parameter so the helper can program VRR VMIN/VMAX/FLIPLINE registers for transcoders other than the crtc_state->cpu_transcoder (e.g. the CMTG transcoder). No functional change: all existing callers pass crtc_state->cpu_transcoder. v2: - Add separate patch for renaming the cpu_transcoder variable. [Ville] Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-11-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Set timings for CMTG by using transcoder timing helpersAnimesh Manna4-6/+45
Expose intel_set_transcoder_timings() & intel_set_transcoder_timings_lrr() so that they can program timings on any transcoder, and use them from a new intel_cmtg_set_timings() helper instead of duplicating the timing register write sequence for CMTG. intel_cmtg_set_timings() maps the CPU transcoder to the corresponding CMTG transcoder (TRANSCODER_A->TRANSCODER_CMTG0, TRANSCODER_B-> TRANSCODER_CMTG1) and calls the shared helper, gated by intel_cmtg_is_allowed(). It is invoked from hsw_configure_cpu_transcoder() for the full modeset path and from intel_pipe_fastset() for the LRR update path. v2: - Use sw state instead of reading directly from hardware. [Jani] - Move set_timing later after encoder enable. [Dibin] v3: - Replace id with trans. [Jani] - Program cmtg set_timing() along with primary transcoder timing. v4: - Use _MMIO_TRANS() for cmtg registers instead of direct multiplication. [Jani] v5: - Modify register definition approach and match existing transcoder definition. [Ville] v6: - Reuse transcoder timing helpers. [Ville] v7: - Introduce enum for set_timing_type. [Uma] - Add check for INVALID_TRANSCODER. [Uma] Bspec: 68989 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-10-animesh.manna@intel.com
2026-06-16drm/i915/display: Rename cpu_transcoder parameter to transcoder in LRR pathAnimesh Manna1-6/+6
intel_set_transcoder_timings_lrr() now takes the target transcoder as an explicit argument rather than implicitly using crtc_state->cpu_transcoder, so the parameter name 'cpu_transcoder' is misleading. Rename it to plain 'transcoder' to reflect that any transcoder may be programmed. No functional change. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-9-animesh.manna@intel.com
2026-06-16drm/i915/display: Pass transcoder to intel_set_transcoder_timings_lrr()Animesh Manna1-7/+7
Make intel_set_transcoder_timings_lrr() take the target transcoder as an explicit parameter instead of always using crtc_state->cpu_transcoder. This allows the LRR timing programming sequence to be reused for other transcoders (e.g. CMTG). Move the intel_vrr_set_fixed_rr_timings() and intel_vrr_transcoder_enable() calls out of intel_set_transcoder_timings_lrr() and into its only caller intel_pipe_fastset(), so the helper now strictly programs the LRR timing registers for the given transcoder. No functional change intended. v2: - Add separate patch for renaming the cpu_transcoder variable. [Ville] Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-8-animesh.manna@intel.com
2026-06-16drm/i915/display: Skip DP_MIN_HBLANK_CTL programming for CMTG transcodersAnimesh Manna1-1/+3
DP_MIN_HBLANK_CTL is a CPU transcoder register and must not be written for the CMTG transcoders. Skip the programming when the target transcoder is TRANSCODER_CMTG0 or TRANSCODER_CMTG1. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-7-animesh.manna@intel.com
2026-06-16drm/i915/display: Rename cpu_transcoder parameter to transcoderAnimesh Manna1-13/+13
intel_set_transcoder_timings() now takes the target transcoder as an explicit argument rather than implicitly using crtc_state->cpu_transcoder, so the parameter name 'cpu_transcoder' is misleading. Rename it to plain 'transcoder' to reflect that any transcoder may be programmed. No functional change. Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20260615200339.885190-6-animesh.manna@intel.com
2026-06-16drm/i915/display: Pass target transcoder to intel_set_transcoder_timings()Animesh Manna1-6/+7
Let intel_set_transcoder_timings() take the target transcoder as an explicit argument instead of always using crtc_state->cpu_transcoder. This makes the helper reusable for callers that need to program timings for a transcoder other than the CRTC's CPU transcoder. Update all existing callers to pass crtc_state->cpu_transcoder so there is no functional change. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-5-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add CMTG transcoder offset in struct _device_infoAnimesh Manna3-1/+17
As all cmtg registers offset from base cmtg register is similar to normal transcoder register, so follow existing way of defining transcoder register for cmtg as well. Add base CMTG offset in struct _display_device_info which will be used to derive the actual register address for platform supporting CMTG. Bspec: 68989 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-4-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Set CMTG clock selectAnimesh Manna4-0/+36
Program the CMTG Clock Select register based on the transcoder used. v2: - Correct mask for PHY B. [Jani] - Use REG_FIELD_PREP() for enable value. [Dibin] - Extend cmtg clock select for xe3plpd. [Dibin] v3: - CMTG support removed for old platform. v4: - Optimize further with else-if. [Uma] - Correct CMTG_CLK_SEL_B_MASK. [Uma] v5: - Add transcoder-port compatibility check. [Dibin] Bspec: 69103 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com> Link: https://patch.msgid.link/20260615200339.885190-3-animesh.manna@intel.com
2026-06-16drm/i915/cmtg: Add intel_cmtg_is_allowed() for CMTGAnimesh Manna2-1/+17
CMTG is supported on transcoder A and transcoder B with EDP, so add a separate helper intel_cmtg_is_allowed() to check the prerequisites for enabling CMTG. CMTG will be enabled only in specific use cases such as PSR2, PR-ALPM, and LOBF, and will be used in conjunction with the DC3CO feature. DC3co will be enabled in a separate patch. Note: Use-case-specific checks and transcoder-port compatibility validation will be handled part of DC3co feature implementation. v2: - Remove separate flag for DC3co from crtc_state. [Uma, Dibin] v3: - Do not access power domain members directly. [Jani] v4: - Remove check for DC3co state now. if needed add Dc3co allow check later once Dc3co patches are merged. [Uma] Bspec: 68915 Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patch.msgid.link/20260615200339.885190-2-animesh.manna@intel.com
2026-06-16Merge tag 'intel-gpio-v7.1-1' of ↵Bartosz Golaszewski1-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current intel-gpio for v7.1-1 * Only trigger interrupts that defined ActiveBoth in ACPI on boot
2026-06-16drm/solomon: use ssd130x_run_cmd_seq() in ssd133x_init()Alberto Ruiz1-106/+30
Replace individual ssd130x_write_cmd() calls and per-command error checks with a flat command array dispatched through ssd130x_run_cmd_seq(). Signed-off-by: Alberto Ruiz <aruiz@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260612-ssd-batchcmd-v1-4-c61e5f7c24bc@redhat.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2026-06-16drm/solomon: use ssd130x_run_cmd_seq() in ssd132x_init()Alberto Ruiz1-85/+26
Replace individual ssd130x_write_cmd() calls and per-command error checks with a flat command array dispatched through ssd130x_run_cmd_seq(). Signed-off-by: Alberto Ruiz <aruiz@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260612-ssd-batchcmd-v1-3-c61e5f7c24bc@redhat.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2026-06-16drm/solomon: use ssd130x_run_cmd_seq() in ssd130x_init()Alberto Ruiz1-37/+19
Replace individual ssd130x_write_cmd() calls and per-command error checks with flat command arrays dispatched through ssd130x_run_cmd_seq(). Signed-off-by: Alberto Ruiz <aruiz@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260612-ssd-batchcmd-v1-2-c61e5f7c24bc@redhat.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2026-06-16drm/solomon: add ssd130x_run_cmd_seq() for batch command executionAlberto Ruiz1-0/+43
Introduce ssd130x_run_cmd_seq() that interprets a flat byte array of length-prefixed command entries terminated by a zero byte, removing the need for per-command error checking at each call site. Signed-off-by: Alberto Ruiz <aruiz@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260612-ssd-batchcmd-v1-1-c61e5f7c24bc@redhat.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2026-06-16Merge tag 'for-7.2/dm-changes' of ↵Linus Torvalds10-304/+1068
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mikulas Patocka: - small cleanups in dm-vdo, dm-raid, dm-cache, dm-zoned-metadata - rework of dm-ima - introduce dm-inlinecrypt - fix wrong return value in dm-ioctl - fix rcu stall when polling * tag 'for-7.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm-zoned-metadata: Use strscpy() to copy device name dm cache: make smq background work limit configurable dm-inlinecrypt: add support for hardware-wrapped keys dm: limit target bio polling to one shot dm-ioctl: report an error if a device has no table dm: add documentation for dm-inlinecrypt target dm-inlinecrypt: add target for inline block device encryption block: export blk-crypto symbols required by dm-inlinecrypt dm-ima: use active table's size if available dm-ima: Fail more gracefully in dm_ima_measure_on_* dm-ima: Handle race between rename and table swap dm-ima: Fix issues with dm_ima_measure_on_device_rename dm-ima: remove new_map from dm_ima_measure_on_device_clear dm-ima: Fix UAF errors and measuring incorrect context dm-ima: don't copy the active table to the inactive table dm-ima: Remove status_flags from dm_ima_measure_on_table_load() dm-ima: remove broken last_target_measured logic dm-ima: remove dm_ima_reset_data() dm-raid: only requeue bios when dm is suspending dm vdo: use get_random_u32() where appropriate
2026-06-16gpio: mlxbf3: fail probe if gpiochip registration failsPengpeng Hou1-1/+2
mlxbf3_gpio_probe() logs a devm_gpiochip_add_data() failure but still returns success. That leaves the platform device bound even though the GPIO chip was not registered. Return the registration error so probe failure matches the missing gpiochip state. Fixes: cd33f216d241 ("gpio: mlxbf3: Add gpio driver support") Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260615091918.43333-1-pengpeng@iscas.ac.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-06-16Merge tag 'for-7.2/block-20260615' of ↵Linus Torvalds44-504/+4183
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux Pull block updates from Jens Axboe: - NVMe pull request via Keith: - Per-controller admin and IO timeout sysfs attributes, and letting the block layer set request timeouts (Maurizio, Maximilian) - Multipath passthrough iostats, and PCI P2PDMA enablement for multipath devices (Keith, Kiran) - A new diag sysfs attribute group exporting per-controller counters (retries, multipath failover, error counters, requeue and failure counts, reset and reconnect events) (Nilay) - FDP configuration validation and bounds check fixes (liuxixin) - Various nvmet fixes, including a pre-auth out-of-bounds read in the Discovery Get Log Page handler, auth payload bounds validation, and tcp error-path leak fixes (Bryam, Tianchu, Geliang) - nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki, Eric) - Assorted other fixes and cleanups (John, Yao, Chao, Mateusz, Achkinazi, Wentao) - MD pull request via Yu Kuai: - raid1/raid10 fixes for a deadlock in the read error recovery path, error-path detection and bio accounting with cloned bios, and an nr_pending leak in the REQ_ATOMIC bad-block error path (Abd-Alrhman) - PCI P2PDMA propagation from member devices to the RAID device (Kiran) - dm-raid bio requeue fix, and various smaller fixes and cleanups (Benjamin, Chen, Li, Thorsten) - Enable Clang lock context analysis for the block layer, with the accompanying annotations across queue limits, the blk_holder_ops callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart) - Block status code infrastructure work: a tagged status table, a str_to_blk_op() helper, a bio_endio_status() helper, and on top of that a new configurable block-layer error injection facility (Christoph) - DRBD netlink rework, replacing the genl_magic machinery with explicit netlink serialization and moving the DRBD UAPI headers to include/uapi/linux/ (Christoph Böhmwalder) - bvec improvements: a bvec_folio() helper and making the bvec_iter helpers proper inline functions (Willy, Christoph) - ublk cleanups and a canceling-flag fix for the disk-not-allocated case (Caleb, Ming) - Partition handling fixes: bound the AIX pp_count scan, fix an of_node refcount leak, and replace __get_free_page() with kmalloc() (Bryam, Wentao, Mike) - Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add WQ_PERCPU to the block workqueue users (Mateusz, Marco) - Block statistics and tracing: propagate in-flight to the whole disk on partition IO, export passthrough stats, and a new block_rq_tag_wait tracepoint (Tang, Keith, Aaron) - A round of removals, unexports and cleanups across bio, direct-io and the bvec helpers (Christoph) - Various driver fixes (mtip32xx use-after-free, rbd snap_count validation and strscpy conversion, nbd socket lockdep reclassify, virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS email/list updates (Coly, Li, Yu, Christoph Böhmwalder) - Other little fixes and cleanups all over * tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits) MAINTAINERS: Update Coly Li's email address block: check bio split for unaligned bvec nbd: Reclassify sockets to avoid lockdep circular dependency block: add configurable error injection block: add a str_to_blk_op helper block: add a "tag" for block status codes block: add a macro to initialize the status table floppy: Drop unused pnp driver data block: propagate in_flight to whole disk on partition I/O virtio-blk: clamp zone report to the report buffer capacity block: optimize I/O merge hot path with unlikely() hints drivers/block/rbd: Use strscpy() to copy strings into arrays partitions: aix: bound the pp_count scan to the ppe array block: Enable lock context analysis block/mq-deadline: Make the lock context annotations compatible with Clang block/Kyber: Make the lock context annotations compatible with Clang block/blk-mq-debugfs: Improve lock context annotations block/blk-iocost: Inline iocg_lock() and iocg_unlock() block/blk-iocost: Split ioc_rqos_throttle() block/crypto: Annotate the crypto functions ...
2026-06-16gpio: pisosr: Read "ngpios" as u32Rob Herring (Arm)1-1/+3
The generic "ngpios" property is encoded as a normal uint32 cell. The pisosr driver stores it in the gpio_chip field, but reading it with a u16 helper does not match the DT property encoding. Read "ngpios" as u32 and keep the existing assignment to the chip field. Assisted-by: Codex:gpt-5-5 Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260612215216.1887485-1-robh@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
2026-06-15Input: mms114 - reject an oversized device packet sizeBryam Vargas1-0/+6
mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer. Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260612-b4-disp-dc4b8dc4-v1-1-d7cb0a828d92@proton.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2026-06-16Merge tag 'hardening-v7.2-rc1' of ↵Linus Torvalds4-2/+78
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - lkdtm: - Add case to provoke a crash in EFI runtime services (Ard Biesheuvel) - add PPC_RADIX_TLBIEL test and missed isync (Sayali Patil) - stddef: Document designated initializer semantics for __TRAILING_OVERLAP() (Gustavo A. R. Silva) - strarray: drop redundant allocation, add __counted_by_ptr (Thorsten Blum) * tag 'hardening-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm/powerpc: add PPC_RADIX_TLBIEL test for radix MCE validation lkdtm/powerpc: add isync after slbmte to enforce SLB update ordering lkdtm: Add case to provoke a crash in EFI runtime services lib/string_helpers: annotate struct strarray with __counted_by_ptr lib/string_helpers: drop redundant allocation in kasprintf_strarray MAINTAINERS: add kernel hardening keyword __counted_by_ptr stddef: Document designated initializer semantics for __TRAILING_OVERLAP()
2026-06-16Merge tag 'v7.2-p1' of ↵Linus Torvalds119-2941/+1959
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Drop support for off-CPU cryptography in af_alg - Document that af_alg is *always* slower - Document the deprecation of af_alg - Remove zero-copy support from skcipher and aead in af_alg - Cap AEAD AD length to 0x80000000 in af_alg - Free default RNG on module exit Algorithms: - Fix vli multiplication carry overflow in ecc - Drop unused cipher_null crypto_alg - Remove unused variants of drbg - Use lib/crypto in drbg - Use memcpy_from/to_sglist in authencesn - Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode - Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode - Filter out async aead implementations at alloc in krb5 - Fix non-parallel fallback by rstoring callback in pcrypt - Validate poly1305 template argument in chacha20poly1305 Drivers: - Add sysfs PCI reset support to qat - Add KPT support for GEN6 devices to qat - Remove unused character device and ioctls from qat - Add support for hw access via SMCC to mtk - Remove prng support from crypto4xx - Remove prng support from hisi-trng - Remove prng support from sun4i-ss - Remove prng support from xilinx-trng - Remove loongson-rng - Remove exynos-rng Others: - Remove support for AIO on sockets" * tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits) crypto: tegra - fix refcount leak in tegra_se_host1x_submit() crypto: rng - Free default RNG on module exit crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode hwrng: jh7110 - fix refcount leak in starfive_trng_read() crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size crypto: cavium/cpt - fix DMA cleanup using wrong loop index crypto: marvell/octeontx - fix DMA cleanup using wrong loop index MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver crypto: amcc - convert irq_of_parse_and_map to platform_get_irq crypto: sun4i-ss - Remove insecure and unused rng_alg hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/ crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512 crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read() crypto: xilinx-trng - Remove crypto_rng interface crypto: exynos-rng - Remove exynos-rng driver hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/ crypto: hisi-trng - Remove crypto_rng interface crypto: loongson - Remove broken and unused loongson-rng crypto: crypto4xx - Remove insecure and unused rng_alg crypto: qat - validate RSA CRT component lengths ...
2026-06-16Merge tag 'slab-for-7.2' of ↵Linus Torvalds2-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - Support for "allocation tokens" (currently available in Clang 22+) for smarter partitioning of kmalloc caches based on the allocated object type, which can be enabled instead of the "random" per-caller-address-hash partitioning. It should be able to deterministically separate types containing a pointer from those that do not (Marco Elver) - Improvements and simplification of the kmem_cache_alloc_bulk() and mempool_alloc_bulk() API. This includes adaptation of callers (Christoph Hellwig) - Performance improvements and cleanups related mostly to sheaves refill (Hao Li, Shengming Hu, Vlastimil Babka) - Several fixups for the slabinfo tool (Xuewen Wang) * tag 'slab-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled mm/slub: preserve original size in _kmalloc_nolock_noprof retry path mm: simplify the mempool_alloc_bulk API mm/slab: improve kmem_cache_alloc_bulk mm/slub: detach and reattach partial slabs in batch mm/slub: introduce helpers for node partial slab state mm/slub: use empty sheaf helpers for oversized sheaves tools/mm/slabinfo: remove redundant slab->partial assignment tools/mm/slabinfo: remove dead assignment in get_obj_and_str() tools/mm/slabinfo: Fix trace disable logic inversion MAINTAINERS: add slab-related scripts and tools to SLAB ALLOCATOR mm/slub: fix typo in sheaves comment mm, slab: simplify returning slab in __refill_objects_node() mm, slab: add an optimistic __slab_try_return_freelist() slab: fix kernel-docs for mm-api slab: improve KMALLOC_PARTITION_RANDOM randomness slab: support for compiler-assisted type-based slab cache partitioning mm/slub: defer freelist construction until after bulk allocation from a new slab
2026-06-16Merge tag 'fbdev-for-7.2-rc1' of ↵Linus Torvalds60-1772/+474
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "Beside the removal of the Hercules monochrome ISA graphics driver and the corresponding text console driver, there is just the typical maintanance with smaller driver fixes and cleanups: Removal of drivers: - Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore) - Hercules mdacon console driver (Ethan Nelson-Moore) Changes affecting many drivers at once: - possible memory leak fixes in various drivers (Abdun Nihaal) - many conversions to use strscpy() (David Laight) - Use named initializers in drivers (Uwe Kleine-König) Code fixes: - fbcon: don't suspend/resume when vc is graphics mode (Lu Yao) - modedb: fix a possible UAF in fb_find_mode() (Tuo Li) - modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold) - arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller) - omap2: fix use-after-free in omapfb_mmap (Hongling Zeng) Cleanups: - pxa168fb: use devm_ioremap_resource() (Alberto Arostegui) - provice helpers for fb_set_var() and fb_blank() and fbcon updates (Thomas Zimmermann) - fbcon: Use correct type for vc_resize() return value (Jiacheng Yu) - chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović) - sunxvr2500: replace printk with device-aware logging functions (Rahman Mahmutović) - sm712: Fix operator precedence in big_swap macro (Li RongQing) - imxfb: Use of_device_get_match_data() (Rosen Penev) - atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev) Documentation fixes: - grvga: Fix CLUT register address offset in comment (Eduardo Silva) - omap/dss: Fix stale modedb.c path (Costa Shulyupin) - correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan Nelson-Moore)" * tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits) fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode fbdev: modedb: fix a possible UAF in fb_find_mode() fbdev: s3fb: Use strscpy() to copy strings into arrays fbdev: sm501fb: Fix buffer errors in OF binding code fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment fbdev/arm: Export acorndata_8x8 font symbol for bootloader fbdev: mmpfb: Use strscpy() to copy device name fbdev: sisfb: Replace strlen() strcpy() pair with strscpy() fbdev: rivafb: Use strscpy() to copy device name fbdev: cyber2000fb: Use strscpy() to copy device name fbdev: atmel_lcdfb: Use strscpy() to copy device name fbdev: Do not export fbcon from fbdev fbdev: Wrap fbcon updates from vga-switcheroo in helper fbdev: Wrap user-invoked calls to fb_blank() in helper fbdev: Wrap user-invoked calls to fb_set_var() in helper fbdev: omap2: fix use-after-free in omapfb_mmap docs: omap/dss: Fix stale modedb.c path fbdev: pxa168fb: use devm_ioremap_resource() for MMIO fbdev: grvga: Fix CLUT register address offset in comment fbdev: sunxvr2500: replace printk with device-aware logging functions ...
2026-06-16Merge tag 'mmc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds14-55/+311
Pull MMC updates from Ulf Hansson: "MMC core: - Validate host's max_segs to fail gracefully MMC host: - davinci: - Avoid potential NULL dereference in the IRQ handler - Call mmc_add_host() in the correct order during probe - dw_mmc-exynos: - Increase DMA threshold for exynos7870 - renesas_sdhi: - Add support for RZ/G2E, RZ/G2N and R-Car M3Le variants - sdhci-msm: - Add support for Hawi, Eliza and Shikra variants - sdhci-of-k1: - Add support for SD UHS-I modes - Add support for tuning for eMMC HS200 and SD UHS-I" * tag 'mmc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (24 commits) mmc: dw_mmc: Add desc_num field for clarity dt-bindings: mmc: sdhci-msm: Rename the binding to include 'qcom' prefix mmc: sdhci-of-dwcmshc: use dev_err_probe() to simplify error paths mmc: sdhci-of-dwcmshc: remove redundant IS_ERR() check dt-bindings: mmc: sdhci-msm: qcom: Add Hawi compatible mmc: renesas_sdhi: Add OF entry for RZ/G2E SoC mmc: renesas_sdhi: Add OF entry for RZ/G2N SoC dt-bindings: mmc: sdhci-msm: Add Eliza compatible mmc: davinci: fix mmc_add_host order in probe dt-bindings: mmc: sdhci-msm: Document the Shikra compatible mmc: sdhci-of-k1: add comprehensive SDR tuning support mmc: sdhci-of-k1: add regulator and pinctrl voltage switching support mmc: sdhci-of-k1: enable essential clock infrastructure for SD operation dt-bindings: mmc: spacemit,sdhci: add pinctrl support for voltage switching mmc: via-sdmmc: Simplify initialisation of pci_device_id array mmc: davinci: avoid NULL deref of host->data in IRQ handler memstick: Constify the driver id_table mmc: host: Move MODULE_DEVICE_TABLE next to the table itself mmc: renesas_sdhi: add R-Car M3Le compatibility string dt-bindings: mmc: renesas,sdhi: Document R-Car M3Le support ...
2026-06-16Merge tag 'hwmon-for-v7.2' of ↵Linus Torvalds222-1031/+6327
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers for the following chips: - Analog Devices LTC4283 Swap Controller - Analog Devices MAX20830 - Analog Devices MAX20860A - ARCTIC Fan Controller - Delta E50SN12051 - Luxshare LX1308 - Microchip EMC1812/13/14/15/33 - Monolithic MP2985 - Murata D1U74T PSU New chip support added to existing drivers: - asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI - dell-smm: Add Dell Latitude 7530 to fan control whitelist - nct6683: Support for ASRock Z890 Pro-A - pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351 - pmbus/max34440: Support for ADPM12250 - pmbus/xdp720: Support for Infineon xdp730, and fix driver issues reported by Sashiko New functionality: - Add support for update_interval_us chip attribute, and support it in ina238 driver - Add support for guard() and scoped_guard() for subsystem locks, and use it in adt7411, ina2xx, and lm90 drivers - emc2305: Support configurable fan PWM at shutdown - lm63: Expose PWM frequency and LUT hysteresis as writable - lm75: Support active-high alert polarity - nct7802: Add time step attributes for tweaking responsiveness - pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter, clear_blackbox, and firmware_revision - raspberrypi: Fix delayed-work teardown race, add voltage input support as well as voltage domain IDs - mcp9982: Add support for reporting external diode faults Miscellaneous bug fixes, changes and improvements: - Use named initializers for platform_device_id arrays and i2c_device_data, and remove unused driver data - Various drivers: Move MODULE_DEVICE_TABLE next to the table itself - ads7871: Convert to hwmon_device_register_with_info(), and use DMA-safe buffer for SPI writes - adt7411: document supported sysfs attributes - adt7462: Add of_match_table to support devicetree - adt7475: Add explicit header include - coretemp; Fix outdated documentation, coding style issues, and replace hardcoded core count with dynamic value - cros_ec: Drop unused assignment of platform_device_id driver data - emc2305: Fix fan channel index handling - gpd-fan: Reject EC PWM value 0 as invalid, fix race condition between device removal and sysfs access, upgrade log level from warn to err for platform device creation failure, initialize EC before registering hwmon device, drop global driver data and use per-device allocation - htu31: document debugfs serial_number - ina238: Add support for samples and update_interval - it87: Clamp negative values to zero in set_fan() - lm75: Add explicit header include, Add explicit default cases in lm75_is_visible(), and add section for sysfs interface to documentation - pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i - tmp102: Use device_property_read_string API - tmp401: Read "ti,n-factor" as signed - Convert zyxel,nsa320-mcu to DT schema" * tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits) hwmon: tmp401: Read "ti,n-factor" as signed hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i hwmon: (gpd-fan) Reject EC PWM value 0 as invalid hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist hwmon: temperature: add support for EMC1812 dt-bindings: hwmon: temperature: add support for EMC1812 hwmon: (gpd-fan): fix race condition between device removal and sysfs access hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure hwmon: (gpd-fan): Initialize EC before registering hwmon device hwmon: (gpd-fan): drop global driver data and use per-device allocation hwmon: (pmbus/max34440): add support adpm12250 hwmon: (ina238) Add update_interval_us attribute hwmon: Add update_interval_us chip attribute hwmon: (ina238) Add support for samples and update_interval gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller hwmon: ltc4283: Add support for the LTC4283 Swap Controller dt-bindings: hwmon: Document the LTC4283 Swap Controller hwmon: (pmbus/xdp720) Fix driver issues xdp720/730 hwmon: (pmbus/xdp720) Add support for efuse xdp730 dt-bindings: hwmon/pmbus: Add Infineon xdp730 ...
2026-06-16Merge tag 'watchdog-for-v7.2' of ↵Linus Torvalds25-1064/+1126
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull watchdog updates and fixes from Guenter Roeck: "Subsystem: - Unregister PM notifier on watchdog unregister - Various documentation fixes and improvements Removed drivers: - Remove AMD Elan SC520 processor watchdog driver - Drop SMARC-sAM67 support - Remove driver for integrated WDT of ZFx86 486-based SoC New drivers: - Driver for Andes ATCWDT200 - Driver for Gunyah Watchdog Added support to existing drivers: - Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple watchdog driver - Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml - Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml Also document sram property and add support to get the bootstatus to qcom wdt driver - lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2 platform - ti,rti-wdt: Add ti,am62l-rti-wdt compatible - renesas: Document RZ/G3L support and rework example for renesas,r9a09g057-wdt Other bug fixes and improvements: - Use named initializers (sc1200, ziirave_wdt) - Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST - realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows - rti_wdt: Add reaction control - renesas,rzn1-wdt: Drop interrupt support and other cleanup - gpio_wdt: Add ACPI support - imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94 - sprd_wdt: Remove redundant sprd_wdt_disable() on register failure - bcm2835_wdt: Switch to new sys-off handler API - sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5 - hpwdt: Refine hpwdt message for UV platform - Convert TS-4800 bindings to DT schema - menz069_wdt: drop unneeded MODULE_ALIAS - sp5100_tco: Use EFCH MMIO for newer Hygon FCH" * tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (58 commits) watchdog: sc1200: Drop unused assignment of pnp_device_id driver data watchdog: unregister PM notifier on watchdog unregister dt-bindings: watchdog: qcom-wdt: Document IPQ5210 watchdog watchdog: dev: convert to kernel-doc comments watchdog: core: clean up some comments watchdog: uapi: add comments for what bit masks apply to watchdog: linux/watchdog.h: repair kernel-doc comments watchdog: add devm_watchdog_register_device() to watchdog-kernel-api watchdog: ziirave_wdt: Use named initializers for struct i2c_device_id watchdog: realtek-otto: enable clock before using I/O watchdog: realtek-otto: prevent PHASE2 underflows dt-bindings: watchdog: qcom-wdt: Document IPQ9650 watchdog dt-bindings: watchdog: renesas,rzn1-wdt: interrupts are not required dt-bindings: watchdog: apple,wdt: Add t8122 compatible watchdog: apple: Add "apple,t8103-wdt" compatible watchdog: rzn1: remove now obsolete interrupt support dt-bindings: watchdog: Add watchdog compatible for RK3528 watchdog: convert the Kconfig dependency on OF_GPIO to OF watchdog: Remove AMD Elan SC520 processor watchdog driver watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk ...
2026-06-16Merge tag 'spi-v7.2' of ↵Linus Torvalds99-1379/+1770
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This has been quite a busy release, mainly due to the subsystem wide work Johan Hovold has done to modernise resource allocation for the subsystem on probe, the subsystem did some very clever allocation management pre devm which didn't quite mesh comfortably with managed allocations and made it far too easy to introduce error handling and removal bugs. - Cleanup and simplification of controller struct allocation, moving everything over to devm and making the devm APIs more robust, from Johan Hovold - Support for spi-mem devices that don't assert chip select and support for a secondary read command for memory mapped flashes, some commits for this are shared with mtd. - Support for SpacemiT K1" * tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (118 commits) spi: Fix mismatched DT property access types spi: xilinx: use FIFO occupancy register to determine buffer size spi: spi-mem: Fix spi_controller_mem_ops kdoc spi: xilinx: let transfers timeout in case of no IRQ spi: dt-bindings: nuvoton,npcm750-fiu: Convert to DT schema spi: meson-spifc: fix runtime PM leak on remove spi: Use named initializers for platform_device_id arrays spi: rzv2h-rspi: Add suspend/resume support spi: dw-pci: remove redundant pci_free_irq_vectors() calls spi: ep93xx: fix double-free of zeropage on DMA setup failure spi: cadence-xspi: Revert COMPILE_TEST support spi: cadence-xspi: Support 32bit and 64bit slave dma interface spi: tegra210-quad: Allocate DMA memory for DMA engine spi: imx: replace dmaengine_terminate_all() with dmaengine_terminate_sync() spi: fsl-lpspi: terminate the RX channel on TX prepare failure path spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync() spi: atmel: fix DMA channel and bounce buffer leaks spi: omap2-mcspi: Use of_device_get_match_data() spi: Use named initializers for arrays of i2c_device_data spi: aspeed: Replace VLA parameter with flat pointer in calibration helper ...
2026-06-16Merge tag 'regulator-v7.2' of ↵Linus Torvalds55-509/+777
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The development of the regulator subsystem continues to be quite quiet, we've got several new devices, removal of one old device and some kernel wide cleanup of platform devices but nothing in the core. - Cleanups of platform_device_id usage - Filling out and fixing of the description of the MediaTek MT6359 - Removal of the PCAP regulator driver, the MFD has been removed - New device support for Qualcomm Nord RPMH, PM8109, PM8150 and PMAU0102, and SG Micro SGM3804" * tag 'regulator-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits) regulator: dt-bindings: mt6311: Convert to DT schema regulator: qcom_smd-regulator: Add PM8019 regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019 regulator: mt6359: Fix vbbck default internal supply name regulator: bq257xx: drop confusing configuration of_node regulator: Unify usage of space and comma in platform_device_id arrays regulator: Use named initializers for platform_device_id arrays regulator: Drop unused assignment of platform_device_id driver data regulator: scmi: fix of_node refcount leak in scmi_regulator_probe() regulator: remove used pcap regulator driver regulator: add SGM3804 Dual Output driver regulator: dt-bindings: document the SGM3804 Dual Output regulator regulator: mt6359: Add proper ldo_vcn33_[12] regulators regulator: mt6359: Add regulator supply names regulator: mt6359: const-ify regulator descriptions regulator: dt-bindings: mt6359: Deprecate bogus vcn33_[12]_* split regulators regulator: dt-bindings: mt6359: Drop regulator-name pattern restrictions regulator: palmas: Move MODULE_DEVICE_TABLE next to the table itself regulator: qcom_smd: Add PM8150 regulators regulator: dt-bindings: qcom,smd-rpm-regulator: Document PM8150 IC ...
2026-06-16Merge tag 'regmap-v7.2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap update from Mark Brown: "This time around we just have a single fix for a sparse warning" * tag 'regmap-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap-i2c: fix sparse warning in regmap_smbus_word_write_reg16
2026-06-16Merge tag 'i2c-7.2-part1' of ↵Linus Torvalds35-456/+1093
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux Pull i2c updates from Andi Shyti: "This pull request is mostly made of cleanups and small infrastructure improvements across the I2C core, drivers and bindings. It also adds support for three drivers and a few new compatibles. Two major cleanup across drivers and core code: - use named initializers in device ID tables - replace dev_err() with dev_err_probe() Drivers: - at24: use named initializers for arrays of i2c_device_data - at91: add MCHP_LAN966X_PCI dependency - cadence: add shutdown callback - k1: enable by default on SpacemiT - mxs: improve documentation - qcom-geni: use pm_runtime_force_suspend/resume for system sleep - tegra: - disable fair arbitration on non-MCTP buses - allocate DMA buffers from the correct DMA device - designware: - handle active target shutdown cleanly - add shutdown callbacks for platform and PCI drivers - adopt the new PM_RUNTIME_ACQUIRE() helpers DT bindings: - convert davinci bindings to DT schema Core and muxes: - acpi: report missing I2C resources as -ENOENT - gpiolib: add gpiod_is_single_ended() helper for I2C GPIO users - i2c-mux-reg: add generic firmware node support - a set of 10 patches from Johan Hovold fixing adapter registration races, cleanup paths and resource management issues New support: - DesignWare LECA0003 (ACPI ID) - Loongson LS2K0300 I2C controller (new driver) - Qualcomm CCI Glymur and Shikra compatibles" * tag 'i2c-7.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux: (46 commits) i2c: mxs: add missing kernel-doc for struct mxs_i2c_dev members i2c: qcom-geni: Use pm_runtime_force_{suspend,resume} helpers dt-bindings: i2c: qcom-cci: Document Glymur compatible dt-bindings: i2c: qcom-cci: Document Shikra compatible i2c: mux: reg: use device property accessors i2c: acpi: Return -ENOENT when no resources found in i2c_acpi_client_count() i2c: at91: Add MCHP_LAN966X_PCI dependency i2c: eg20t: Consistently define pci_device_ids using named initializers i2c: designware-pcidrv: Consistently define pci_device_ids using named initializers i2c: bcm-kona: fix spelling mistake in timeout-check comment i2c: cadence: Add shutdown handler i2c: tegra: Disable fair arbitration for non-MCTP buses i2c: tegra: use dmaengine_get_dma_device() for DMA buffer allocation i2c: busses: make K1 driver default for SpacemiT platforms i2c: Use named initializers for arrays of i2c_device_data i2c: core: clean up adapter registration error label i2c: core: clean up bus id allocation i2c: core: fix adapter deregistration race i2c: core: fix adapter registration race i2c: core: disable runtime PM on adapter registration failure ...
generated by cgit (git 2.54.0.dirty) at 2026-10-01 03:21:20 +0000